27 files changed, 0 insertions, 2129 deletions
diff --git a/libgloss/m32r/Makefile.in b/libgloss/m32r/Makefile.in
deleted file mode 100644
index ea9eba3d8..000000000
--- a/libgloss/m32r/Makefile.in
+++ /dev/null
@@ -1,146 +0,0 @@
-# Makefile for libgloss/m32r
-# Copyright (c) 1996, 1998 Cygnus Support.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms are permitted
-# provided that the above copyright notice and this paragraph are
-# duplicated in all such forms and that any documentation,
-# advertising materials, and other materials related to such
-# distribution and use acknowledge that the software was developed
-# at Cygnus Support, Inc.  Cygnus Support, Inc. may not be used to
-# endorse or promote products derived from this software without
-# specific prior written permission.
-# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-DESTDIR =
-VPATH = @srcdir@ @srcdir@/..
-srcdir = @srcdir@
-objdir = .
-srcroot = $(srcdir)/../..
-objroot = $(objdir)/../..
-
-host_alias = @host_alias@
-target_alias = @target_alias@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-libdir = @libdir@
-tooldir = $(exec_prefix)/$(target_alias)
-
-TOP = ../..
-SRCTOP = ../..
-
-# Multilib support variables.
-# TOP is used instead of MULTI{BUILD,SRC}TOP.
-MULTISRCTOP =
-MULTIBUILDTOP =
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-SHELL = /bin/sh
-
-CC = @CC@
-
-AS = @AS@
-AR = @AR@
-LD = @LD@
-RANLIB = @RANLIB@
-
-AR_FLAGS = qv
-BISON = bison
-MAKEINFO = makeinfo
-
-.NOEXPORT:
-MAKEOVERRIDES=
-
-TARGETDOC = ../../targetdep.tex
-
-CRT0 = crt0.o
-GDBLIB = m32r-lib.o
-GDBSTUB = m32r-stub.o
-EVASCRIPT = eva.ld
-STUBSCRIPT = eva-stub.ld
-
-GENERIC_LIBOBJS = \
-	chmod.o close.o exit.o fstat.o getpid.o isatty.o kill.o lseek.o \
-	open.o raise.o read.o sbrk.o stat.o unlink.o utime.o write.o
-
-LIBOBJS = trap0.o $(GENERIC_LIBOBJS)
-LIBGLOSS = libgloss.a
-
-MONLIBOBJS = trapmon0.o $(GENERIC_LIBOBJS)
-MONLIBGLOSS = libmon.a
-MONSPECS = mon.specs
-
-# Host specific makefile fragment comes in here.
-@host_makefile_frag@
-
-all: $(CRT0) $(LIBGLOSS) $(MONLIBGLOSS) $(GDBLIB) $(GDBSTUB)
-
-m32r-stub.o: $(srcdir)/$(MULTISRCTOP)../../gdb/m32r-stub.c
-	$(CC) -c $(CFLAGS) -o $@ $(srcdir)/$(MULTISRCTOP)../../gdb/m32r-stub.c
-
-libgloss.a: $(LIBOBJS)
-	$(AR) $(ARFLAGS) $@ $(LIBOBJS)
-	$(RANLIB) $@
-
-libmon.a: $(MONLIBOBJS)
-	$(AR) $(ARFLAGS) $@ $(MONLIBOBJS)
-	$(RANLIB) $@
-
-install:
-	mkdir -p $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}
-	$(INSTALL_DATA) $(CRT0) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(CRT0)
-	$(INSTALL_DATA) $(LIBGLOSS) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(LIBGLOSS)
-	$(INSTALL_DATA) $(MONLIBGLOSS) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(MONLIBGLOSS)
-	$(INSTALL_DATA) $(GDBLIB) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(GDBLIB)
-	$(INSTALL_DATA) $(GDBSTUB) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(GDBSTUB)
-	$(INSTALL_DATA) $(srcdir)/$(EVASCRIPT) $(DESTDIR)$(tooldir)/lib/$(EVASCRIPT)
-	$(INSTALL_DATA) $(srcdir)/$(STUBSCRIPT) $(DESTDIR)$(tooldir)/lib/$(STUBSCRIPT)
-	$(INSTALL_DATA) $(srcdir)/$(MONSPECS) $(DESTDIR)$(tooldir)/lib/$(MONSPECS)
-
-clean mostlyclean:
-	rm -f *~ *.[oa]
-
-distclean maintainer-clean realclean: clean
-	rm -f Makefile config.status
-
-info doc:
-install-info:
-clean-info:
-
-Makefile: Makefile.in config.status @host_makefile_frag_path@
-	$(SHELL) config.status
-
-config.status: configure
-	$(SHELL) config.status --recheck
-
-# to support SunOS VPATH
-crt0.o: crt0.S
-m32r-lib.o: m32r-lib.c
-chmod.o: chmod.c
-close.o: close.c
-exit.o: exit.c
-fstat.o: fstat.c
-getpid.o: getpid.c
-isatty.o: isatty.c
-kill.o: kill.c
-lseek.o: lseek.c
-open.o: open.c
-raise.o: raise.c
-read.o: read.c
-sbrk.o: sbrk.c
-stat.o: stat.c
-unlink.o: unlink.c
-utime.o: utime.c
-write.o: write.c
-trap0.o: trap0.S
-trapmon0.o: trapmon0.c
diff --git a/libgloss/m32r/chmod.c b/libgloss/m32r/chmod.c
deleted file mode 100644
index 14990d9a9..000000000
--- a/libgloss/m32r/chmod.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_chmod (const char *path, short mode)
-{
-  return TRAP0 (SYS_chmod, path, mode, 0);
-}
diff --git a/libgloss/m32r/close.c b/libgloss/m32r/close.c
deleted file mode 100644
index 1e32da447..000000000
--- a/libgloss/m32r/close.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_close (int file)
-{
-  return TRAP0 (SYS_close, file, 0, 0);
-}
diff --git a/libgloss/m32r/configure b/libgloss/m32r/configure
deleted file mode 100755
index 5e13aa20f..000000000
--- a/libgloss/m32r/configure
+++ /dev/null
@@ -1,1233 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=crt0.S
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:573: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:594: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:612: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-
-if test "$srcdir" = "." ; then
-  mdir=`echo "${with_multisubdir}/" \
-    | sed -e 's,\([^/][^/]*\),..,g' -e 's,^/$,,'`
-  ac_aux_dir=
-for ac_dir in ${mdir}../../.. $srcdir/${mdir}../../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ${mdir}../../.. $srcdir/${mdir}../../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-else
-  ac_aux_dir=
-for ac_dir in ${srcdir}/../.. $srcdir/${srcdir}/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ${srcdir}/../.. $srcdir/${srcdir}/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-fi
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:710: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:774: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:804: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:853: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:862: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:877: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-AS=${AS-as}
-
-AR=${AR-ar}
-
-LD=${LD-ld}
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:913: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-host_makefile_frag=${srcdir}/../config/default.mh
-
-host_makefile_frag_path=$host_makefile_frag
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@CC@%$CC%g
-s%@AS@%$AS%g
-s%@AR@%$AR%g
-s%@LD@%$LD%g
-s%@RANLIB@%$RANLIB%g
-s%@host_makefile_frag_path@%$host_makefile_frag_path%g
-/@host_makefile_frag@/r $host_makefile_frag
-s%@host_makefile_frag@%%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-srcdir=${srcdir}
-target=${target}
-ac_configure_args="${ac_configure_args} --enable-multilib"
-CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-libgloss_topdir=${srcdir}/../..
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-. ${srcdir}/../../config-ml.in
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/libgloss/m32r/configure.in b/libgloss/m32r/configure.in
deleted file mode 100644
index 7ea64c887..000000000
--- a/libgloss/m32r/configure.in
+++ /dev/null
@@ -1,82 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-AC_PREREQ(2.5)dnl
-AC_INIT(crt0.S)
-
-AC_CANONICAL_SYSTEM
-AC_ARG_PROGRAM
-
-if test "$srcdir" = "." ; then
-  mdir=`echo "${with_multisubdir}/" \
-    | sed -e 's,\([[^/]][[^/]]*\),..,g' -e 's,^/$,,'`
-  AC_CONFIG_AUX_DIR(${mdir}../../..)
-else
-  AC_CONFIG_AUX_DIR(${srcdir}/../..)
-fi
-
-AC_PROG_INSTALL
-
-# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable.  This should really be fixed in autoconf
-# itself.
-
-AC_DEFUN(LIB_AC_PROG_CC,
-[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-AC_CHECK_PROG(CC, gcc, gcc)
-if test -z "$CC"; then
-  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-fi
-
-AC_PROG_CC_GNU
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-dnl Check whether -g works, even if CFLAGS is set, in case the package
-dnl plays around with CFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  AC_PROG_CC_G
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CC
-AS=${AS-as}
-AC_SUBST(AS)
-AR=${AR-ar}
-AC_SUBST(AR)
-LD=${LD-ld}
-AC_SUBST(LD)
-AC_PROG_RANLIB
-
-host_makefile_frag=${srcdir}/../config/default.mh
-
-dnl We have to assign the same value to other variables because autoconf
-dnl doesn't provide a mechanism to substitute a replacement keyword with
-dnl arbitrary data or pathnames.
-dnl
-host_makefile_frag_path=$host_makefile_frag
-AC_SUBST(host_makefile_frag_path)
-AC_SUBST_FILE(host_makefile_frag)
-
-AC_OUTPUT(Makefile,
-. ${srcdir}/../../config-ml.in,
-srcdir=${srcdir}
-target=${target}
-ac_configure_args="${ac_configure_args} --enable-multilib"
-CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-libgloss_topdir=${srcdir}/../..
-)
diff --git a/libgloss/m32r/crt0.S b/libgloss/m32r/crt0.S
deleted file mode 100644
index 7c22f5afd..000000000
--- a/libgloss/m32r/crt0.S
+++ /dev/null
@@ -1,52 +0,0 @@
-	.text
-	.balign 4
-	.global	_start
-_start:
-
-	seth	sp, #shigh(_stack)
-	add3	sp, sp, #low(_stack)
-	ldi	fp, #0
-
-# Clear the BSS.  Do it in two parts for efficiency: longwords first
-# for most of it, then the remaining 0 to 3 bytes.
-
-	seth	r2, #shigh(__bss_start)
-	add3	r2, r2, #low(__bss_start); R2 = start of BSS
-	seth	r3, #shigh(_end)
-	add3	r3, r3, #low(_end)	; R3 = end of BSS + 1
-	
-	sub	r3, r2		; R3 = BSS size in bytes
-	mv	r4, r3
-	srli	r4, #2		; R4 = BSS size in longwords (rounded down)
-	ldi	r1, #0		; clear R1 for longword store
-	addi	r2, #-4		; account for pre-inc store
-	beqz	r4, .Lendloop1	; any more to go?
-.Lloop1:
-	st	r1, @+r2	; yep, zero out another longword
-	addi	r4, #-1		; decrement count
-	bnez	r4, .Lloop1	; go do some more
-.Lendloop1:
-	and3	r4, r3, #3	; get no. of remaining BSS bytes to clear
-	addi	r2, #4		; account for pre-inc store
-	beqz	r4, .Lendloop2	; any more to go?
-.Lloop2:
-	stb	r1, @r2		; yep, zero out another byte
-	addi	r2, #1		; bump address
-	addi	r4, #-1		; decrement count
-	bnez	r4, .Lloop2	; go do some more
-.Lendloop2:
-
-# Run code in the .init section.
-# This will queue the .fini section to be run with atexit.
-
-	bl	__init
-
-# Call main, then exit.
-
-	bl	main
-	bl	exit
-
-# If that fails just loop.
-
-.Lexit:
-	bra	.Lexit
diff --git a/libgloss/m32r/eit.h b/libgloss/m32r/eit.h
deleted file mode 100644
index ef51c08fe..000000000
--- a/libgloss/m32r/eit.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* M32R libgloss EIT interface.
-   Copyright (C) 1998, Cygnus Solutions.
-
-   At present we only document trap 0, the syscall interface.
-   In the future this can hold further EIT related stuff.
-   [The m32r manuals use the acronym EIT: exception, interrupt, trap.]  */
-
-#include <reent.h>
-
-int __trap0 (int function, int p1, int p2, int p3, struct _reent *r);
-
-#define TRAP0(f, p1, p2, p3) \
-__trap0 (f, (int) (p1), (int) (p2), (int) (p3), _REENT)
diff --git a/libgloss/m32r/eva-stub.ld b/libgloss/m32r/eva-stub.ld
deleted file mode 100644
index 34c341cc0..000000000
--- a/libgloss/m32r/eva-stub.ld
+++ /dev/null
@@ -1,111 +0,0 @@
-OUTPUT_FORMAT("elf32-m32r", "elf32-m32r",
-	      "elf32-m32r")
-OUTPUT_ARCH(m32r)
-ENTRY(_start)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-
-INPUT(m32r-stub.o)
-INPUT(m32r-lib.o)
-INPUT(-lgloss)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x200000;
-  .interp        : { *(.interp) 	}
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.init      : { *(.rel.init)	}
-  .rela.init     : { *(.rela.init)	}
-  .rel.fini      : { *(.rel.fini)	}
-  .rela.fini     : { *(.rela.fini)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		} = 0
-  .plt           : { *(.plt)		}
-  .text          :
-  {
-    *(.text)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  } = 0
-  _etext = .;
-  PROVIDE (etext = .);
-  .fini          : { *(.fini)    	} = 0
-  .rodata        : { *(.rodata) *(.gnu.linkonce.r*) }
-  .rodata1       : { *(.rodata1) 	}
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(32) + (ALIGN(8) & (32 - 1));
-  .data          :
-  {
-    *(.data)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  }
-  .data1         : { *(.data1)		}
-  .ctors         :
-  {
-    *(.ctors)
-  }
-  .dtors         :
-  {
-    *(.dtors)
-  }
-  .got           : { *(.got.plt) *(.got) }
-  .dynamic       : { *(.dynamic) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata         : { *(.sdata) }
-  _edata  =  .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss          : { *(.sbss) *(.scommon) }
-  .bss           :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab           0 : { *(.stab)	    }
-  .stabstr        0 : { *(.stabstr) 	    }
-  .stab.excl      0 : { *(.stab.excl) 	    }
-  .stab.exclstr   0 : { *(.stab.exclstr)    }
-  .stab.index     0 : { *(.stab.index) 	    }
-  .stab.indexstr  0 : { *(.stab.indexstr)   }
-  .comment        0 : { *(.comment) 	    }
-  /* DWARF debug sections.
-     Symbols in the .debug DWARF section are relative to the beginning of the
-     section so we begin .debug at 0.  It's not clear yet what needs to happen
-     for the others.   */
-  .debug          0 : { *(.debug) 	    }
-  .debug_srcinfo  0 : { *(.debug_srcinfo)   }
-  .debug_aranges  0 : { *(.debug_aranges)   }
-  .debug_pubnames 0 : { *(.debug_pubnames)  }
-  .debug_sfnames  0 : { *(.debug_sfnames)   }
-  .line           0 : { *(.line) 	    }
-  .stack 0x207ffc   : { _stack = .; *(.stack) }
-  /* These must appear regardless of  .  */
-}
-
diff --git a/libgloss/m32r/eva.ld b/libgloss/m32r/eva.ld
deleted file mode 100644
index ee664642f..000000000
--- a/libgloss/m32r/eva.ld
+++ /dev/null
@@ -1,97 +0,0 @@
-OUTPUT_FORMAT("elf32-m32r", "elf32-m32r",
-	      "elf32-m32r")
-OUTPUT_ARCH(m32r)
-ENTRY(_start)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-
-INPUT(-lgloss)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x208000;
-  .interp        : { *(.interp) 	}
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.init      : { *(.rel.init)	}
-  .rela.init     : { *(.rela.init)	}
-  .rel.fini      : { *(.rel.fini)	}
-  .rela.fini     : { *(.rela.fini)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		} =0
-  .plt           : { *(.plt)		}
-  .text          :
-  {
-    *(.text)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  } =0
-  _etext = .;
-  PROVIDE (etext = .);
-  .fini          : { *(.fini)		} =0
-  .rodata        : { *(.rodata) *(.gnu.linkonce.r*) }
-  .rodata1       : { *(.rodata1)	}
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(32) + (ALIGN(8) & (32 - 1));
-  .data          :
-  {
-    *(.data)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  }
-  .data1         : { *(.data1)		}
-  .ctors         : { *(.ctors)		}
-  .dtors         : { *(.dtors)		}
-  .got           : { *(.got.plt) *(.got)}
-  .dynamic       : { *(.dynamic)	}
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata         : { *(.sdata)		}
-  _edata  =  .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss          : { *(.sbss) *(.scommon) }
-  .bss           : { *(.dynbss) *(.bss) *(COMMON) }
-  _end = . ;
-  PROVIDE (end = .);
-  /* Stabs debugging sections.  */
-  .stab 0        : { *(.stab)		}
-  .stabstr 0     : { *(.stabstr)	}
-  .stab.excl 0   : { *(.stab.excl)	}
-  .stab.exclstr 0 : { *(.stab.exclstr)	}
-  .stab.index 0  : { *(.stab.index)	}
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0     : { *(.comment)	}
-  /* DWARF debug sections.
-     Symbols in the .debug DWARF section are relative to the beginning of the
-     section so we begin .debug at 0.  It's not clear yet what needs to happen
-     for the others.   */
-  .debug          0 : { *(.debug) 	  }
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  .line           0 : { *(.line)	  }
-  .stack   0x5ffffc : { _stack = .; *(.stack) }
-  /* These must appear regardless of  .  */
-}
diff --git a/libgloss/m32r/exit.c b/libgloss/m32r/exit.c
deleted file mode 100644
index 5251f0d62..000000000
--- a/libgloss/m32r/exit.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-void
-_exit (n)
-{
-  TRAP0 (SYS_exit, n, 0, 0);
-}
diff --git a/libgloss/m32r/fstat.c b/libgloss/m32r/fstat.c
deleted file mode 100644
index 1f91828cf..000000000
--- a/libgloss/m32r/fstat.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_fstat (int file, struct stat *st)
-{
-  st->st_mode = S_IFCHR;
-  return 0;
-}
diff --git a/libgloss/m32r/getpid.c b/libgloss/m32r/getpid.c
deleted file mode 100644
index ff6e9023d..000000000
--- a/libgloss/m32r/getpid.c
+++ /dev/null
@@ -1,6 +0,0 @@
-
-int
-_getpid (int n)
-{
-  return 1;
-}
diff --git a/libgloss/m32r/isatty.c b/libgloss/m32r/isatty.c
deleted file mode 100644
index bb5f2ac3c..000000000
--- a/libgloss/m32r/isatty.c
+++ /dev/null
@@ -1,8 +0,0 @@
-
-/* FIXME: can we not nuke the 10,000 copies of this function
-   and fudge things (which is all this function does) in _fstat?  */
-int
-isatty (int fd)
-{
-  return 1;
-}
diff --git a/libgloss/m32r/kill.c b/libgloss/m32r/kill.c
deleted file mode 100644
index d7aaee9ab..000000000
--- a/libgloss/m32r/kill.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-_kill (n, m)
-{
-  return TRAP0 (SYS_exit, 0xdead, 0, 0);
-}
diff --git a/libgloss/m32r/lseek.c b/libgloss/m32r/lseek.c
deleted file mode 100644
index 1fbb5d020..000000000
--- a/libgloss/m32r/lseek.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_lseek (int file, int ptr, int dir)
-{
-  return TRAP0 (SYS_lseek, file, ptr, dir);
-}
diff --git a/libgloss/m32r/m32r-lib.c b/libgloss/m32r/m32r-lib.c
deleted file mode 100644
index 1d2d29131..000000000
--- a/libgloss/m32r/m32r-lib.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* Stand-alone library for M32R-EVA board.
- *
- * Copyright (c) 1996, 1998 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-/* #define REVC to enable handling of the original RevC board,
-   which is no longer the default, nor is it supported.  */
-
-#ifndef REVC
-
-/* Serial I/O routines for MSA2000G01 board */
-#define UART_INCHAR_ADDR	0xff004009
-#define UART_OUTCHR_ADDR	0xff004007
-#define UART_STATUS_ADDR	0xff004002
-
-#else
-
-/* Serial I/O routines for M32R-EVA board */
-#define UART_INCHAR_ADDR	0xff102013
-#define UART_OUTCHR_ADDR	0xff10200f
-#define UART_STATUS_ADDR	0xff102006
-
-#endif
-
-#define UART_INPUT_EMPTY	0x4
-#define UART_OUTPUT_EMPTY	0x1
-
-static volatile char  *rx_port   = (unsigned char *)  UART_INCHAR_ADDR;
-static volatile char  *tx_port   = (char *)  UART_OUTCHR_ADDR;
-static volatile short *rx_status = (short *) UART_STATUS_ADDR;
-static volatile short *tx_status = (short *) UART_STATUS_ADDR;
-
-static int
-rx_rdy()
-{
-#ifndef REVC
-  return (*rx_status & UART_INPUT_EMPTY);
-#else
-  return !(*rx_status & UART_INPUT_EMPTY);
-#endif
-}
-
-static int
-tx_rdy()
-{
-  return (*tx_status & UART_OUTPUT_EMPTY);
-}
-
-static unsigned char
-rx_uchar()
-{
-  return *rx_port;
-}
-
-void
-tx_char(char c)
-{
-  *tx_port = c;
-}
-
-int
-getDebugChar()
-{
-  while (!rx_rdy())
-    ;
-  return rx_uchar();
-}
-
-void
-putDebugChar(int c)
-{
-  while (!tx_rdy())
-    ;
-  tx_char(c);
-}
-
-void mesg(char *p)
-{
-  while (*p)
-    {
-      if (*p == '\n')
-	putDebugChar('\r');
-      putDebugChar(*p++);
-    }
-}
-
-void phex(long x)
-{
-  char buf[9];
-  int i;
-
-  buf[8] = '\0';
-  for (i = 7; i >= 0; i--)
-    {
-      char c = x & 0x0f;
-      buf[i] = c < 10 ? c + '0' : c - 10 + 'A';
-      x >>= 4;
-    }
-  mesg(buf);
-}
-
-/*
- * These routines set and get exception handlers.  They look a little
- * funny because the M32R uses branch instructions in its exception
- * vectors, not just the addresses.  The instruction format used is
- * BRA pcdisp24.
- */
-
-#define TRAP_VECTOR_BASE_ADDR   0x00000040
-
-/* Setup trap TT to go to ROUTINE. */
-void 
-exceptionHandler (int tt, unsigned long routine)
-{
-#ifndef REVC
-  unsigned long *tb = (unsigned long *) TRAP_VECTOR_BASE_ADDR;
-  tb[tt] = (0xff000000 | ((routine - (unsigned long) (&tb[tt])) >> 2));
-#else
-  unsigned long *tb = 0;	/* Trap vector base address */
-
-  tb[tt] = ((routine >> 2) | 0xff000000) - tt;
-#endif
-}
-
-/* Return the address of trap TT handler */
-unsigned long
-getExceptionHandler (int tt)
-{
-#ifndef REVC
-  unsigned long *tb = (unsigned long *) TRAP_VECTOR_BASE_ADDR;
-  return ((tb[tt] & ~0xff000000) << 2) + (unsigned long) (&tb[tt]);
-#else
-  unsigned long *tb = 0;	/* Trap vector base address */
-
-  return ((tb[tt] + tt) | 0xff000000) << 2;
-#endif
-}
diff --git a/libgloss/m32r/mon.specs b/libgloss/m32r/mon.specs
deleted file mode 100644
index 5db789af6..000000000
--- a/libgloss/m32r/mon.specs
+++ /dev/null
@@ -1,3 +0,0 @@
-*endfile_cpu:
--lmon %{m32rx:m32rx/crtfini.o%s} %{!m32rx:crtfini.o%s}
-
diff --git a/libgloss/m32r/open.c b/libgloss/m32r/open.c
deleted file mode 100644
index 6671c29fe..000000000
--- a/libgloss/m32r/open.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_open (const char *path, int flags)
-{
-  return TRAP0 (SYS_open, path, flags, 0);
-}
diff --git a/libgloss/m32r/raise.c b/libgloss/m32r/raise.c
deleted file mode 100644
index b2dc2f65d..000000000
--- a/libgloss/m32r/raise.c
+++ /dev/null
@@ -1,5 +0,0 @@
-/* ??? Needed?  */
-
-_raise ()
-{
-}
diff --git a/libgloss/m32r/read.c b/libgloss/m32r/read.c
deleted file mode 100644
index 0e32b746d..000000000
--- a/libgloss/m32r/read.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_read (int file, char *ptr, int len)
-{
-  return TRAP0 (SYS_read, file, ptr, len);
-}
diff --git a/libgloss/m32r/sbrk.c b/libgloss/m32r/sbrk.c
deleted file mode 100644
index bc8209104..000000000
--- a/libgloss/m32r/sbrk.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-caddr_t
-_sbrk (int incr)
-{
-  /* `_end' is defined in the linker script.
-     We must handle it carefully as we don't want the compiler to think
-     it lives in the small data area.  Use medium model to ensure 32 bit
-     addressability.  */
-  extern char _end __attribute__ ((__model__(__medium__)));
-  static char *heap_end;
-  char *prev_heap_end;
-  char *sp = (char *)&sp;
-
-  if (heap_end == 0)
-    {
-      heap_end = &_end;
-    }
-  prev_heap_end = heap_end;
-  if (heap_end > sp)
-    {
-      _write (1, "Heap and stack collision\n", 25);
-#if 0 /* Calling abort brings in the signal handling code.  */
-      abort ();
-#else
-      exit (1);
-#endif
-    }
-  heap_end += incr;
-  return (caddr_t) prev_heap_end;
-}
diff --git a/libgloss/m32r/stat.c b/libgloss/m32r/stat.c
deleted file mode 100644
index eb4c8e394..000000000
--- a/libgloss/m32r/stat.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_stat (const char *path, struct stat *st)
-
-{
-  return TRAP0 (SYS_stat, path, st, 0);
-}
diff --git a/libgloss/m32r/trap0.S b/libgloss/m32r/trap0.S
deleted file mode 100644
index 04efa13ba..000000000
--- a/libgloss/m32r/trap0.S
+++ /dev/null
@@ -1,16 +0,0 @@
-; Trap 0 handler (syscall interface).
-;
-; The trap handler returns the result in r0 and the error code (errno value)
-; in r2.  r1 is reserved in case an 8 byte quantity ever needs to be
-; returned in registers.
-
-	.text
-	.global	__trap0
-__trap0:
-	trap	#0		; trap 0 returns result in r0, error code in r2
-	cmpui	r2,#1		; is error code zero?
-	bc	.Lret		; yes, skip setting errno
-	ld	r4,@(sp)	; no, set errno
-	st	r2,@r4
-.Lret:
-	jmp	lr		; return to caller
diff --git a/libgloss/m32r/trapmon0.c b/libgloss/m32r/trapmon0.c
deleted file mode 100644
index 20a2fcbfe..000000000
--- a/libgloss/m32r/trapmon0.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Mon2000 Trap handler (syscall interface).
- *
- * This trap handler is linked into the mon2000 libgloss (libmon).
- */
-#include <reent.h>
-#include "syscall.h"
-
-int __trap0 (int function, int p1, int p2, int p3, struct _reent *r)
-{
-  int rc = 0;
-
-  switch (function) {
-  case SYS_exit:
-    /* loop so GDB can't go past system exit call */
-    while (1) {
-      asm volatile (
-          "ldi	  r0, #0						\n"
-          "trap    #15        ; return control to Mon2000");
-    }
-    break;
-
-  case SYS_write:
-  {
-    int i;
-
-    for( i=0; i<p3; i++ ) {
-      asm volatile (
-          "ldi   r0, #2							\n"
-          "ldi   r1, #15      ; load Ctrl-O (ASCII 15)			\n"
-          "trap  #15          ; write Ctrl-O for quoting purposes" );
-
-      asm volatile (
-          "ldi   r0, #2							\n"
-          "ldb   r1, %0							\n"
-          "trap  #15          ; write character to console" 
-          : /* no outputs */
-          : "m" (((char*)p2)[i]));
-    }
-
-    rc = p3;                 /* return number of chars written */
-    break;
-  }
-
-  default:
-    rc = 0;
-    break;
-  }
-
-  return rc;
-}
-
-
diff --git a/libgloss/m32r/unlink.c b/libgloss/m32r/unlink.c
deleted file mode 100644
index 14f741ec1..000000000
--- a/libgloss/m32r/unlink.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_unlink ()
-{
-  return -1;
-}
diff --git a/libgloss/m32r/utime.c b/libgloss/m32r/utime.c
deleted file mode 100644
index ea8da2f3c..000000000
--- a/libgloss/m32r/utime.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_utime (path, times)
-     const char *path;
-     char *times;
-{
-  return TRAP0 (SYS_utime, path, times, 0);
-}
diff --git a/libgloss/m32r/write.c b/libgloss/m32r/write.c
deleted file mode 100644
index 55be40c1d..000000000
--- a/libgloss/m32r/write.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "syscall.h"
-#include "eit.h"
-
-int
-_write (int file, char *ptr, int len)
-{
-  return TRAP0 (SYS_write, file, ptr, len);
-}