diff options
Diffstat (limited to 'libgloss/mips/Makefile.in')
| -rw-r--r-- | libgloss/mips/Makefile.in | 259 |
1 files changed, 0 insertions, 259 deletions
diff --git a/libgloss/mips/Makefile.in b/libgloss/mips/Makefile.in deleted file mode 100644 index 2042e48ec..000000000 --- a/libgloss/mips/Makefile.in +++ /dev/null @@ -1,259 +0,0 @@ -# Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000 Cygnus Support -# -# The authors hereby grant permission to use, copy, modify, distribute, -# and license this software and its documentation for any purpose, provided -# that existing copyright notices are retained in all copies and that this -# notice is included verbatim in any distributions. No written agreement, -# license, or royalty fee is required for any of the authorized uses. -# Modifications to this software may be copyrighted by their authors -# and need not follow the licensing terms described here, provided that -# the new terms are clearly indicated on the first page of each file where -# they apply. - -DESTDIR = -VPATH = @srcdir@ -srcdir = @srcdir@ -objdir = . -srcroot = $(srcdir)/../.. -objroot = $(objdir)/../.. - -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -host_alias = @host_alias@ -target_alias = @target_alias@ -program_transform_name = @program_transform_name@ - -bindir = @bindir@ -libdir = @libdir@ -tooldir = $(exec_prefix)/$(target_alias) - -# Multilib support variables. -# TOP is used instead of MULTI{BUILD,SRC}TOP. -MULTIDIRS = -MULTISUBDIR = -MULTIDO = true -MULTICLEAN = true - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ - -SHELL = /bin/sh - -CC = @CC@ - -#AS = @AS@ -AS = `if [ -f ${objroot}/../gas/as.new ] ; \ - then echo ${objroot}/../gas/as.new ; \ - else echo as ; fi` - -AR = @AR@ - -#LD = @LD@ -LD = `if [ -f ${objroot}/../ld/ld.new ] ; \ - then echo ${objroot}/../ld/ld.new ; \ - else echo ld ; fi` - -RANLIB = @RANLIB@ - -OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \ - then echo ${objroot}/../binutils/objdump ; \ - else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi` -OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \ - then echo ${objroot}/../binutils/objcopy ; \ - else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi` - -CRT0 = @crt0@ -PCRT0 = @pcrt0@ -GENOBJS = syscalls.o fstat.o getpid.o isatty.o kill.o \ - lseek.o print.o putnum.o stat.o unlink.o -GENOBJS2 = open.o close.o read.o write.o -IDTOBJS = idtmon.o @part_specific_obj@ ${GENOBJS} -PMONOBJS = pmon.o @part_specific_obj@ ${GENOBJS} -LSIOBJS = lsipmon.o @part_specific_obj@ ${GENOBJS} -DVEOBJS = dvemon.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2} -JMR3904OBJS = jmr3904-io.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2} -CFEOBJS = cfe.o cfe_api.o cfe_mem.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2} -CYGMONOBJS = open.o close.o cygmon.o @part_specific_obj@ ${GENOBJS} - -# Nullmon cannot support read and write, but the test cases pull them in via libs -NULLMONOBJS = nullmon.o @part_specific_obj@ ${GENOBJS} - -CFLAGS = -g - -GCC_LDFLAGS = `if [ -d ${objroot}/../gcc ] ; \ - then echo -L${objroot}/../gcc ; fi` - -SCRIPTS = @script_list@ -BSP = @bsp_list@ - -PART_SPECIFIC_DEFINES = @part_specific_defines@ - -# Host specific makefile fragment comes in here. -@host_makefile_frag@ - -# -# build a test program for each target board. Just trying to get -# it to link is a good test, so we ignore all the errors for now. -# - -all: ${CRT0} ${PCRT0} test.o ${BSP} - -# -# here's where we build the board support packages for each target -# -mipsidt.o: $(IDTOBJS) - ${LD} -r $(IDTOBJS) -o $@ - -mipspmon.o: $(PMONOBJS) - ${LD} -r $(PMONOBJS) -o $@ - -mipslsi.o: $(PMONOBJS) - ${LD} -r $(LSIOBJS) -o $@ - -libidt.a: $(IDTOBJS) - ${AR} ${ARFLAGS} $@ $(IDTOBJS) - ${RANLIB} $@ - -libpmon.a: $(PMONOBJS) - ${AR} ${ARFLAGS} $@ $(PMONOBJS) - ${RANLIB} $@ - -liblsi.a: $(LSIOBJS) - ${AR} ${ARFLAGS} $@ $(LSIOBJS) - ${RANLIB} $@ - -libdve.a: $(DVEOBJS) - ${AR} ${ARFLAGS} $@ $(DVEOBJS) - ${RANLIB} $@ - -libjmr3904.a: $(JMR3904OBJS) - ${AR} ${ARFLAGS} $@ $(JMR3904OBJS) - ${RANLIB} $@ - -libcygmon.a: $(CYGMONOBJS) - ${AR} ${ARFLAGS} $@ $(CYGMONOBJS) - ${RANLIB} $@ - -libcfe.a: $(CFEOBJS) - ${AR} ${ARFLAGS} $@ $(CFEOBJS) - ${RANLIB} $@ - -# nullmon.a , This is what you want if you want crt0 but NO mon services -# Supports GDB sim testing, board bringups, ICE operation. -libnullmon.a: $(NULLMONOBJS) - ${AR} ${ARFLAGS} $@ $(NULLMONOBJS) - ${RANLIB} $@ - - -# compile a fully linked binary. The -Wl,-T*.ld is for the linker -# script. By using -Wl, the linker script is put on the proper place -# in the comand line for ld, and all the symbols will get fully -# resolved. - -test: $(OBJS) ${BSP} pmon-test idt-test cfe-test - @echo Done... - -dtor.o: $(srcdir)/dtor.C - $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -o $@ -c $< -dtor.x: dtor.o ${CRT0} ${srcdir}/pmon.ld Makefile libpmon.a - ${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \ - dtor.o -o $@ $(NEWLIB_LDFLAGS) -N -Wl,-Tpmon.ld - -pmon-test.x: test.o ${CRT0} Makefile libpmon.a - ${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \ - test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tpmon.ld -pmon-test.srec: pmon-test.x - $(OBJCOPY) -O srec pmon-test.x $@ -pmon-test.dis: pmon-test.x - @rm -fr pmon-test.dis - $(OBJDUMP) -d pmon-test.x > $@ -pmon-test: pmon-test.srec pmon-test.dis - -idt-test.x: test.o ${CRT0} Makefile libidt.a - ${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \ - test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tidt.ld -idt-test.srec: idt-test.x - $(OBJCOPY) -O srec idt-test.x $@ -idt-test.dis: idt-test.x - @rm -fr idt-test.dis - $(OBJDUMP) -d idt-test.x > $@ -idt-test: idt-test.srec idt-test.dis - -cfe-test.x: test.o ${CRT0} Makefile libcfe.a - ${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \ - test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tcfe.ld -cfe-test.srec: cfe-test.x - $(OBJCOPY) -O srec cfe-test.x $@ -cfe-test.dis: cfe-test.x - @rm -fr cfe-test.dis - $(OBJDUMP) -d cfe-test.x > $@ -cfe-test: cfe-test.srec cfe-test.dis - -doc: - -clean mostlyclean: - rm -f a.out core *.i *~ *.o *-test *.srec *.dis *.map *.x - -distclean maintainer-clean realclean: clean - rm -f Makefile config.status a.out - -.PHONY: install info install-info clean-info -install: - @for file in $(CRT0) $(PCRT0) $(BSP); do \ - $(INSTALL_DATA) $${file} $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \ - done - @for script in ${SCRIPTS}; do\ - $(INSTALL_DATA) ${srcdir}/$${script}.ld $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$${script}.ld; \ - done - -info: -install-info: -clean-info: - -test.o: ${srcdir}/test.c - -# these are for the BSPs -crt0.o: ${srcdir}/crt0.S -pcrt0.o: ${srcdir}/crt0.S - $(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) -DGCRT0 ${srcdir}/crt0.S -o ${PCRT0} -crt0_cfe.o: ${srcdir}/crt0_cfe.S -crt0_cygmon.o: ${srcdir}/crt0_cygmon.S -idtmon.o: ${srcdir}/idtmon.S -pmon.o: ${srcdir}/pmon.S - $(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) $(PART_SPECIFIC_DEFINES) ${srcdir}/pmon.S -o pmon.o -vr4300.o: ${srcdir}/vr4300.S - $(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/vr4300.S -vr5xxx.o: ${srcdir}/vr5xxx.S - $(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/vr5xxx.S -lsipmon.o: $(srcdir)/lsipmon.S $(srcdir)/pmon.S -jmr3904-io.o: ${srcdir}/jmr3904-io.c - $(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/jmr3904-io.c -o $@ -cfe.o: ${srcdir}/cfe.c ${srcdir}/cfe_api.h - $(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe.c -o $@ -cfe_api.o: ${srcdir}/cfe_api.c ${srcdir}/cfe_api.h ${srcdir}/cfe_api_int.h - $(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe_api.c -o $@ -cfe_mem.o: ${srcdir}/cfe_mem.c ${srcdir}/cfe_api.h - $(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe_mem.c -o $@ - -# cma101 can not be compiled mips16, if a mips16 version is needed then -# it will have to be built, then this rule can be scrapped, allowing -# the implicit rule to run. -cma101.o: ${srcdir}/cma101.c - $(CC) -c $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) $(CFLAGS) -mno-mips16 ${srcdir}/cma101.c - -# cygmon can not be compiled as mips16 since it uses the syscall instruction -cygmon.o: ${srcdir}/cygmon.c - $(CC) -c $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) $(CFLAGS) -mno-mips16 ${srcdir}/cygmon.c - -syscalls.o: ${srcdir}/syscalls.c - -# target specific makefile fragment comes in here. -@target_makefile_frag@ - -Makefile: Makefile.in config.status @host_makefile_frag_path@ @target_makefile_frag_path@ - $(SHELL) config.status - -config.status: configure - $(SHELL) config.status --recheck |