diff options
Diffstat (limited to 'libgloss/sparc/Makefile.in')
| -rw-r--r-- | libgloss/sparc/Makefile.in | 286 |
1 files changed, 0 insertions, 286 deletions
diff --git a/libgloss/sparc/Makefile.in b/libgloss/sparc/Makefile.in deleted file mode 100644 index fcf5448a3..000000000 --- a/libgloss/sparc/Makefile.in +++ /dev/null @@ -1,286 +0,0 @@ -# Copyright (c) 1995, 1996, 1997 Cygnus Support -# -# The authors hereby grant permission to use, copy, modify, distribute, -# and license this software and its documentation for any purpose, provided -# that existing copyright notices are retained in all copies and that this -# notice is included verbatim in any distributions. No written agreement, -# license, or royalty fee is required for any of the authorized uses. -# Modifications to this software may be copyrighted by their authors -# and need not follow the licensing terms described here, provided that -# the new terms are clearly indicated on the first page of each file where -# they apply. - -# Makefile for libgloss/sparc. This is the board support -# code for the various sparc targets. - -VPATH = @srcdir@ -srcdir = @srcdir@ -objdir = . -srcroot = $(srcdir)/../.. -objroot = $(objdir)/../.. - -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -host_alias = @host_alias@ -target_alias = @target_alias@ - -bindir = @bindir@ -libdir = @libdir@ -tooldir = $(exec_prefix)/$(target_alias) - -# Multilib support variables. -# TOP is used instead of MULTI{BUILD,SRC}TOP. -MULTIDIRS = -MULTISUBDIR = -MULTIDO = true -MULTICLEAN = true - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ - -SHELL = /bin/sh - -CC = @CC@ - -AS = @AS@ -AR = @AR@ -LD = @LD@ -RANLIB = @RANLIB@ -AR_FLAGS = qrv - -OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \ - then echo ${objroot}/../binutils/objdump ; \ - else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi` -OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \ - then echo ${objroot}/../binutils/objcopy ; \ - else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi` - -CYGMON_CRT0 = cygmon-crt0.o -CYGMON_BSP = libcygmon.a -CYGMON_OBJS = cygmon-salib.o - -701_CRT0 = crt0-701.o -701_BSP = libsplet701.a -701_OBJS = sysc-701.o salib-701.o sparclet-stub.o - -930_BSP = libslite930.a -931_BSP = libslite931.a -934_BSP = libslite934.a -86X_BSP = libslite86x.a - -# for the time being, built the stub without hardware breakpoint support -SLITE_OBJS = salib.o sparcl-stub.o cache.o - -# ERC32: SIS simulator, see sim/erc32. -ERC32_CRT0 = erc32-crt0.o -ERC32_BSP = liberc32.a -ERC32_OBJS = erc32-io.o traps.o erc32-stub.o debug.o fixctors.o -ERC32_ALL = $(ERC32_CRT0) $(ERC32_BSP) - -CRT0 = crt0.o -OBJS = close.o fstat.o getpid.o isatty.o kill.o \ - lseek.o open.o print.o putnum.o read.o sbrk.o stat.o \ - unlink.o write.o - -# This is set to one of SPARC, SLITE, or SPLET by configure. -# It's not clear what to do here. -# One could certainly build everything. The assembler supports all cpu -# variants (via runtime switches). However, the compiler [currently] doesn't. -# Of course, it may be the case that there isn't any cpu specific code in -# C source files, but there might be in the future. -CPU = @CPU@ - -# sparc stuff (not sparclite or sparclet) -SPARC_ALL = $(CYGMON_BSP) $(CYGMON_CRT0) $(objdir)/cygmon.ld -SPARC_INSTALL = sparc-install -SPARC_OBJ_FORMAT = sparc -SPARC_RAM_START = 0x4000 - -# sparc 64 stuff -SPARC64_ALL = $(CYGMON_BSP) $(CYGMON_CRT0) $(objdir)/cygmon.ld -SPARC64_INSTALL = sparc-install -SPARC64_OBJ_FORMAT = sparc:v9 -SPARC64_RAM_START = 0x4000 - -# sparclite stuff -SLITE_ALL = $(930_BSP) $(931_BSP) $(CYGMON_BSP) $(CYGMON_CRT0) $(objdir)/cygmon.ld $(934_BSP) $(86X_BSP) -SLITE_INSTALL = slite-install -SLITE_OBJ_FORMAT = sparc -SLITE_RAM_START = 0x40050000 - -# sparclet stuff -SPLET_ALL = $(701_CRT0) $(701_BSP) -SPLET_INSTALL = splet-install - -#### Host specific Makefile fragment comes in here. -@host_makefile_frag@ - -all: ${CRT0} $($(CPU)_ALL) $(ERC32_ALL) - -$(CYGMON_CRT0): cygmon-crt0.S - $(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) -DTARGET_CPU_$(CPU) $(INCLUDES) -o $@ -c $(srcdir)/cygmon-crt0.S - -$(CYGMON_BSP): $(CYGMON_OBJS) - @rm -f $@ - ${AR} ${AR_FLAGS} $@ $(CYGMON_OBJS) - ${RANLIB} $@ - -#$(STUBLIBS): $(OBJS) $(SLITE_OBJS) $(CRT0) -# ${CC} -nostdlib -r $(SLITE_OBJS) $(SHARED_OBJS) -o $(930_BSP) -# ${CC} -DSL931 -nostdlib -r $(SLITE_OBJS) $(SHARED_OBJS) -o $(931_BSP) -# ${CC} -nostdlib -r $(SLITE_OBJS) $(SHARED_OBJS) -o $(934_BSP) - -$(CRT0): $(srcdir)/crt0.S $(srcdir)/asm.h $(srcdir)/slite.h - $(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -o $@ -c $(srcdir)/crt0.S - -$(930_BSP) $(931_BSP) $(934_BSP) $(86X_BSP): $(OBJS) $(SLITE_OBJS) - @rm -f $@ - ${AR} ${AR_FLAGS} $@ $(OBJS) $(SLITE_OBJS) - ${RANLIB} $@ - -$(701_BSP): $(701_OBJS) - @rm -f $@ - ${AR} ${AR_FLAGS} $@ $(701_OBJS) - ${RANLIB} $@ - -erc32-crt0.o: $(srcdir)/erc32-crt0.S $(srcdir)/asm.h $(srcdir)/slite.h - $(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -o $@ -c $(srcdir)/erc32-crt0.S - -liberc32.a: $(OBJS) $(ERC32_OBJS) - @rm -f $@ - ${AR} ${AR_FLAGS} $@ $(OBJS) $(ERC32_OBJS) - ${RANLIB} $@ - -crt0-701.o: crt0-701.S -sysc-701.o: sysc-701.c -salib-701.o: salib-701.c -sparclet-stub.o: sparclet-stub.c -cygmon-salib.o: cygmon-salib.c - $(CC) -DTARGET_CPU_$(CPU) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -o $@ -c $(srcdir)/cygmon-salib.c -cache.o: $(srcdir)/cache.c -salib.o: $(srcdir)/salib.c -win.o: $(srcdir)/win.S -syscalls.o: $(srcdir)/syscalls.c -sparcl-stub.o: $(srcdir)/sparcl-stub.c $(srcdir)/../debug.h $(srcdir)/../debug.c -erc32-stub.o: $(srcdir)/erc32-stub.c $(srcdir)/../debug.h $(srcdir)/../debug.c -fixctors.o : $(srcdir)/fixctors.c - -$(objdir)/cygmon.ld: @CYGMONLDSCRIPTTEMPL@ - sed 's/TARGET_OBJ_FORMAT/$($(CPU)_OBJ_FORMAT)/g;s/TARGET_RAM_START/$($(CPU)_RAM_START)/g;' < $(<) > $(objdir)/cygmon.ld - -install: $($(CPU)_INSTALL) - $(INSTALL_DATA) $(CRT0) $(tooldir)/lib${MULTISUBDIR}/$(CRT0) - -sparc-install: - $(INSTALL_DATA) $(CYGMON_BSP) $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(CYGMON_OBJS) $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(objdir)/cygmon.ld $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(CYGMON_CRT0) $(tooldir)/lib${MULTISUBDIR} - -slite-install: - $(INSTALL_DATA) $(930_BSP) $(tooldir)/lib${MULTISUBDIR}/$(930_BSP) - $(INSTALL_DATA) $(931_BSP) $(tooldir)/lib${MULTISUBDIR}/$(931_BSP) - $(INSTALL_DATA) $(934_BSP) $(tooldir)/lib${MULTISUBDIR}/$(934_BSP) - $(INSTALL_DATA) $(86X_BSP) $(tooldir)/lib${MULTISUBDIR}/$(86X_BSP) - $(INSTALL_DATA) $(srcdir)/ex930.ld $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(srcdir)/ex931.ld $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(srcdir)/ex934.ld $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(srcdir)/sparc86x.ld $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(srcdir)/elfsim.ld $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(ERC32_CRT0) $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(ERC32_BSP) $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(objdir)/traps.o $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(CYGMON_BSP) $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(CYGMON_OBJS) $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(objdir)/cygmon.ld $(tooldir)/lib${MULTISUBDIR} - $(INSTALL_DATA) $(CYGMON_CRT0) $(tooldir)/lib${MULTISUBDIR} - -splet-install: - $(INSTALL_DATA) $(701_CRT0) $(tooldir)/lib${MULTISUBDIR}/$(701_CRT0) - $(INSTALL_DATA) $(701_BSP) $(tooldir)/lib${MULTISUBDIR}/$(701_BSP) - $(INSTALL_DATA) $(srcdir)/tsc701.ld $(tooldir)/lib${MULTISUBDIR} - -# Make a simple test case to test the linker script, startup code, and -# I/O code -# -test: ex930-test.x ex931-test.x erc32-test.x - @echo Done... - -# compile a fully linked binary. The -N option is for a.out, so the -# base address will be zero, rather than the default of 0x2020. The -# -Wl,-T*.ld is for the linker script. By using -Wl, the linker script -# is put on the proper place in the comand line for ld, and all the -# symbols will get fully resolved. - -erc32-test.x: test.o ${ERC32_CRT0} ${srcdir}/erc32.ld Makefile ${ERC32_BSP} - ${CC} -L${srcdir} -L${objdir} test.o -o $@ $(LDFLAGS_FOR_TARGET) \ - -N -Wl,-Terc32.ld -Wl,-Map -Wl,erc32.map -nostdlib -erc32-test.srec: erc32-test.x - $(OBJCOPY) -O srec erc32-test.x $@ -erc32-test.dis: erc32-test.x - @rm -fr erc32-test.dis - $(OBJDUMP) -d erc32-test.x > $@ -erc32-test: erc32-test.srec erc32-test.dis - -ex930-test.x: test.o ${CRT0} ${srcdir}/ex930.ld Makefile ${930_BSP} - ${CC} -L${srcdir} -L${objdir} test.o -o $@ $(LDFLAGS_FOR_TARGET) \ - -N -Wl,-Tex930.ld -nostdlib -ex930-test.srec: ex930-test.x - $(OBJCOPY) -O srec ex930-test.x $@ -ex930-test.dis: ex930-test.x - @rm -fr ex930-test.dis - $(OBJDUMP) -d ex930-test.x > $@ -ex930-test: ex930-test.srec ex930-test.dis - -ex931-test.x: test.o ${CRT0} ${srcdir}/ex931.ld Makefile ${931_BSP} - ${CC} -L${srcdir} -L${objdir} test.o -o $@ $(LDFLAGS_FOR_TARGET) \ - -N -Wl,-Tex931.ld -nostdlib -ex931-test.srec: ex931-test.x - $(OBJCOPY) -O srec ex931-test.x $@ -ex931-test.dis: ex931-test.x - @rm -fr ex931-test.dis - $(OBJDUMP) -d ex931-test.x > $@ -ex931-test: ex931-test.srec ex931-test.dis - -ex934-test.x: test.o ${CRT0} ${srcdir}/ex934.ld Makefile ${934_BSP} - ${CC} -L${srcdir} -L${objdir} test.o -o $@ $(LDFLAGS_FOR_TARGET) \ - -N -Wl,-Tex934.ld -nostdlib -ex934-test.srec: ex934-test.x - $(OBJCOPY) -O srec ex934-test.x $@ -ex934-test.dis: ex934-test.x - @rm -fr ex934-test.dis - $(OBJDUMP) -d ex934-test.x > $@ -ex934-test: ex934-test.srec ex934-test.dis - -# a C++ test case -dtor.o: $(srcdir)/dtor.C - $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -o $@ -c $? -dtor.dis: dtor.x - @rm -fr dtor.dis - $(OBJDUMP) -d dtor.x > $@ -dtor.x: dtor.o ${ERC32_CRT0} ${srcdir}/erc32.ld Makefile ${ERC32_BSP} - ${CC} -L${srcdir} -L${objdir} dtor.o -o $@ $(LIBS_FOR_TARGET) \ - -N -Wl,-Terc32.ld - -# target specific makefile fragment comes in here. -@target_makefile_frag@ - -clean mostlyclean: - rm -f *.o *.a *.map *.x - -distclean maintainer-clean realclean: clean - rm -f Makefile config.cache config.log config.status - -.PHONY: info dvi doc install-info clean-info -info doc dvi: -install-info: -clean-info: - -Makefile: Makefile.in config.status @host_makefile_frag_path@ \ - @target_makefile_frag_path@ - $(SHELL) config.status - -config.status: configure - $(SHELL) config.status --recheck |