diff options
Diffstat (limited to 'newlib/libc/sys/a29khif')
48 files changed, 0 insertions, 10342 deletions
diff --git a/newlib/libc/sys/a29khif/Makefile.am b/newlib/libc/sys/a29khif/Makefile.am deleted file mode 100644 index 48f389695..000000000 --- a/newlib/libc/sys/a29khif/Makefile.am +++ /dev/null @@ -1,48 +0,0 @@ -## Process this file with automake to generate Makefile.in - -AUTOMAKE_OPTIONS = cygnus - -INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) - -noinst_LIBRARIES = lib.a - -lib_a_SOURCES = \ - _alloc.s \ - _close.s \ - _cycles.s \ - _exit.s \ - _getpsiz.s \ - _gettz.s \ - _ioctl.s \ - _iostat.s \ - _iowait.s \ - _lseek.s \ - _open.s \ - _query.s \ - _read.s \ - _setim.s \ - _settrap.s \ - _setvec.s \ - _tmpnam.s \ - _write.s \ - alloc.s \ - clock.s \ - getargs.s \ - getenv.s \ - read.s \ - remove.s \ - rename.s \ - signal.s \ - _sbrk.s \ - _fstat.s \ - _isatty.s \ - systime.s \ - vec.s \ - kill.c \ - getpid.c \ - stubs.s - -all: crt0.o - -ACLOCAL_AMFLAGS = -I ../../.. -CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host diff --git a/newlib/libc/sys/a29khif/Makefile.in b/newlib/libc/sys/a29khif/Makefile.in deleted file mode 100644 index 027a83098..000000000 --- a/newlib/libc/sys/a29khif/Makefile.in +++ /dev/null @@ -1,337 +0,0 @@ -# Makefile.in generated automatically by automake 1.3 from Makefile.am - -# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include - -DISTDIR = - -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ - -top_builddir = . - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -transform = @program_transform_name@ - -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = @host_alias@ -host_triplet = @host@ -AR = @AR@ -AS = @AS@ -CC = @CC@ -CPP = @CPP@ -EXEEXT = @EXEEXT@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -VERSION = @VERSION@ -machine_dir = @machine_dir@ -newlib_basedir = @newlib_basedir@ -sys_dir = @sys_dir@ - -AUTOMAKE_OPTIONS = cygnus - -INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) - -noinst_LIBRARIES = lib.a - -lib_a_SOURCES = \ - _alloc.s \ - _close.s \ - _cycles.s \ - _exit.s \ - _getpsiz.s \ - _gettz.s \ - _ioctl.s \ - _iostat.s \ - _iowait.s \ - _lseek.s \ - _open.s \ - _query.s \ - _read.s \ - _setim.s \ - _settrap.s \ - _setvec.s \ - _tmpnam.s \ - _write.s \ - alloc.s \ - clock.s \ - getargs.s \ - getenv.s \ - read.s \ - remove.s \ - rename.s \ - signal.s \ - _sbrk.s \ - _fstat.s \ - _isatty.s \ - systime.s \ - vec.s \ - kill.c \ - getpid.c \ - stubs.s - -ACLOCAL_AMFLAGS = -I ../../.. -CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs -CONFIG_CLEAN_FILES = -LIBRARIES = $(noinst_LIBRARIES) - - -DEFS = @DEFS@ -I. -I$(srcdir) -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -lib_a_LIBADD = -lib_a_OBJECTS = _alloc.o _close.o _cycles.o _exit.o _getpsiz.o _gettz.o \ -_ioctl.o _iostat.o _iowait.o _lseek.o _open.o _query.o _read.o _setim.o \ -_settrap.o _setvec.o _tmpnam.o _write.o alloc.o clock.o getargs.o \ -getenv.o read.o remove.o rename.o signal.o _sbrk.o _fstat.o _isatty.o \ -systime.o vec.o kill.o getpid.o stubs.o -CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) -LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@ -DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in - - -DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - -TAR = tar -GZIP = --best -SOURCES = $(lib_a_SOURCES) -OBJECTS = $(lib_a_OBJECTS) - -all: Makefile $(LIBRARIES) - -.SUFFIXES: -.SUFFIXES: .S .c .o .s -$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINT@ configure.in ../../../acinclude.m4 \ - ../../../aclocal.m4 - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) - cd $(srcdir) && $(AUTOCONF) - -mostlyclean-noinstLIBRARIES: - -clean-noinstLIBRARIES: - -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) - -distclean-noinstLIBRARIES: - -maintainer-clean-noinstLIBRARIES: - -.c.o: - $(COMPILE) -c $< - -.s.o: - $(COMPILE) -c $< - -.S.o: - $(COMPILE) -c $< - -mostlyclean-compile: - -rm -f *.o core *.core - -clean-compile: - -distclean-compile: - -rm -f *.tab.c - -maintainer-clean-compile: - -lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) - -rm -f lib.a - $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) - $(RANLIB) lib.a - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) - here=`pwd` && cd $(srcdir) \ - && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP) - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ - || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) - -mostlyclean-tags: - -clean-tags: - -distclean-tags: - -rm -f TAGS ID - -maintainer-clean-tags: - -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - -rm -rf $(distdir) - GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz - mkdir $(distdir)/=build - mkdir $(distdir)/=inst - dc_install_base=`cd $(distdir)/=inst && pwd`; \ - cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix=$$dc_install_base \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) dist - -rm -rf $(distdir) - @echo "========================"; \ - echo "$(distdir).tar.gz is ready for distribution"; \ - echo "========================" -dist: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -dist-all: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -distdir: $(DISTFILES) - -rm -rf $(distdir) - mkdir $(distdir) - -chmod 777 $(distdir) - @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ - test -f $(distdir)/$$file \ - || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ - || cp -p $$d/$$file $(distdir)/$$file; \ - done -info: -dvi: -check: - $(MAKE) $(AM_MAKEFLAGS) -installcheck: -install-info: -install-exec: - @$(NORMAL_INSTALL) - -install-data: - @$(NORMAL_INSTALL) - -install: install-exec install-data all - @: - -uninstall: - -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install -installdirs: - - -mostlyclean-generic: - -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -rm -f Makefile $(DISTCLEANFILES) - -rm -f config.cache config.log stamp-h stamp-h[0-9]* - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -mostlyclean: mostlyclean-noinstLIBRARIES mostlyclean-compile \ - mostlyclean-tags mostlyclean-generic - -clean: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ - mostlyclean - -distclean: distclean-noinstLIBRARIES distclean-compile distclean-tags \ - distclean-generic clean - -rm -f config.status - -maintainer-clean: maintainer-clean-noinstLIBRARIES \ - maintainer-clean-compile maintainer-clean-tags \ - maintainer-clean-generic distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - -rm -f config.status - -.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ -clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ -mostlyclean-compile distclean-compile clean-compile \ -maintainer-clean-compile tags mostlyclean-tags distclean-tags \ -clean-tags maintainer-clean-tags distdir info dvi installcheck \ -install-info install-exec install-data install uninstall all \ -installdirs mostlyclean-generic distclean-generic clean-generic \ -maintainer-clean-generic clean mostlyclean distclean maintainer-clean - - -all: crt0.o - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/newlib/libc/sys/a29khif/_alloc.s b/newlib/libc/sys/a29khif/_alloc.s deleted file mode 100644 index ecdd1ddb1..000000000 --- a/newlib/libc/sys/a29khif/_alloc.s +++ /dev/null @@ -1,55 +0,0 @@ -; @(#)_alloc.s 1.4 90/10/14 21:57:19, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; 07/06/89 (JS) Replaced call to const tav,HIF_macro @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 to syscall macro, -; and deleted call to reterr macro as a NULL needs to be -; returned on failure. -; _alloc.s -; void *vp = _sysalloc( int size ); -; - .file "_alloc.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __sysalloc -__sysalloc: - const tav,HIF_alloc @ asneq V_SYSCALL,gr1,gr1 - jmpti tav, lr0 - const tpc, _errno - consth tpc, _errno - store 0, 0, tav, tpc - jmpi lr0 - const v0, 0 ; return NULL on error. - -; -; int errret = _sysfree( void *addr, int size ); -; - .global __sysfree -__sysfree: - const tav,HIF_free @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_close.s b/newlib/libc/sys/a29khif/_close.s deleted file mode 100644 index 04f52ae00..000000000 --- a/newlib/libc/sys/a29khif/_close.s +++ /dev/null @@ -1,40 +0,0 @@ -; @(#)_close.s 1.4 90/10/14 21:57:20, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc.; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _close.s -; int cc = _close( int fd ); -; - .file "_close.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __close -;; syscalls used now -- .global _close - -__close: -;; syscalls used now -- _close: - const tav,HIF_close @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_cycles.s b/newlib/libc/sys/a29khif/_cycles.s deleted file mode 100644 index 94f9df3b4..000000000 --- a/newlib/libc/sys/a29khif/_cycles.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_cycles.s 1.2 90/10/14 21:57:21, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _cycles.s -; struct { unsigned long low_ticks, long hi_ticks } = _cycles( ); -; - .file "_cycles.s" - .include "sys/sysmac.h" - .text - .word 0x00020000 ; Debugger tag word - .global __cycles - -__cycles: - const tav,HIF_cycles @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_exit.s b/newlib/libc/sys/a29khif/_exit.s deleted file mode 100644 index 65b9b83e3..000000000 --- a/newlib/libc/sys/a29khif/_exit.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_exit.s 1.2 90/10/14 21:57:22, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _exit.s -; _exit( int rc ); -; - .file "_exit.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __exit - -__exit: - const tav,HIF_exit @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_fstat.s b/newlib/libc/sys/a29khif/_fstat.s deleted file mode 100644 index 0144d76d9..000000000 --- a/newlib/libc/sys/a29khif/_fstat.s +++ /dev/null @@ -1,79 +0,0 @@ - .file "_fstat.c" - .sect .lit,lit -gcc2_compiled.: - .text - .align 4 - .global __fstat -;; syscalls used now -- .global _fstat - .word 0x40000 -__fstat: -;; syscalls used now -- _fstat: - sub gr1,gr1,32 - asgeu V_SPILL,gr1,gr126 - add lr1,gr1,48 - sll lr5,lr10,0 - const gr116,__iostat - consth gr116,__iostat - calli lr0,gr116 - sll lr2,lr5,0 - sll lr10,gr96,0 - jmpt lr10,L8 - sll gr116,lr10,30 - jmpf gr116,L3 - add gr116,lr11,12 - add gr117,lr11,12 - const gr116,4096 - store 0,0,gr116,gr117 - add gr117,lr11,4 - const gr116,1 - jmp L4 - store 0,0,gr116,gr117 -L3: - const gr117,8192 - store 0,0,gr117,gr116 - add gr116,lr11,4 - store 0,0,gr117,gr116 -L4: - add gr117,lr11,20 - const gr116,0 - store 0,0,gr116,gr117 - store 0,0,gr116,lr11 - const gr116,_time - consth gr116,_time - calli lr0,gr116 - const lr2,0 - add gr116,lr11,16 - store 0,0,gr96,gr116 - sll lr2,lr5,0 - const lr3,0 - const lr7,__lseek - consth lr7,__lseek - calli lr0,lr7 - const lr4,1 - sll lr10,gr96,0 - constn lr6,65535 - cpneq gr116,lr10,lr6 - jmpf gr116,L7 - sll lr2,lr5,0 - const lr3,0 - calli lr0,lr7 - const lr4,2 - add gr116,lr11,8 - store 0,0,gr96,gr116 - cpneq gr96,gr96,lr6 - jmpf gr96,L7 - sll lr2,lr5,0 - sll lr3,lr10,0 - calli lr0,lr7 - const lr4,0 - cpneq gr96,gr96,lr6 - jmpt gr96,L8 - const gr96,0 -L7: - constn gr96,65535 -L8: - add gr1,gr1,32 - nop - jmpi lr0 - asleu V_FILL,lr1,gr127 - diff --git a/newlib/libc/sys/a29khif/_getpsiz.s b/newlib/libc/sys/a29khif/_getpsiz.s deleted file mode 100644 index b9949a003..000000000 --- a/newlib/libc/sys/a29khif/_getpsiz.s +++ /dev/null @@ -1,38 +0,0 @@ -; @(#)_getpsiz.s 1.2 90/10/14 21:57:23, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _getpsiz.s -; int size = _getpsiz( ); -; - .file "_getpsiz.s" - .include "sys/sysmac.h" - .text - .word 0x00020000 ; Debugger tag word - .global __getpsiz - -__getpsiz: - const tav,HIF_getpagesize @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - .end diff --git a/newlib/libc/sys/a29khif/_gettz.s b/newlib/libc/sys/a29khif/_gettz.s deleted file mode 100644 index 36cf1c702..000000000 --- a/newlib/libc/sys/a29khif/_gettz.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_gettz.s 2.2 90/10/14 21:57:24, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _gettz.s -; _gettz( void ); -; - .file "_gettz.s" - .include "sys/sysmac.h" - .text - .word 0x00020000 ; Debugger tag word - .global __gettz - -__gettz: - const tav,HIF_gettz @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_ioctl.s b/newlib/libc/sys/a29khif/_ioctl.s deleted file mode 100644 index 0ca51c504..000000000 --- a/newlib/libc/sys/a29khif/_ioctl.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_ioctl.s 1.2 90/10/14 21:57:25, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _ioctl.s -; _ioctl( int fd ); -; - .file "_ioctl.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __ioctl - -__ioctl: - const tav,HIF_ioctl @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_iostat.s b/newlib/libc/sys/a29khif/_iostat.s deleted file mode 100644 index ae97c5de5..000000000 --- a/newlib/libc/sys/a29khif/_iostat.s +++ /dev/null @@ -1,43 +0,0 @@ -;---------------------------------------------------------------------------- -; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _iostat.s -; _iostat( int fd ); -; - .file "_iostat.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __iostat - .global _iostat - -__iostat: -_iostat: - const tav,HIF_iostat @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end - diff --git a/newlib/libc/sys/a29khif/_iowait.s b/newlib/libc/sys/a29khif/_iowait.s deleted file mode 100644 index 3e2ad61cd..000000000 --- a/newlib/libc/sys/a29khif/_iowait.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_iowait.s 1.3 90/10/14 21:57:27, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _iowait.s -; _iowait( int fd ); -; - .file "_iowait.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __iowait - -__iowait: - const tav,HIF_iowait @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_isatty.s b/newlib/libc/sys/a29khif/_isatty.s deleted file mode 100644 index 55110e2fc..000000000 --- a/newlib/libc/sys/a29khif/_isatty.s +++ /dev/null @@ -1,22 +0,0 @@ - .file "isatty.c" - .sect .lit,lit -gcc2_compiled.: - .text - .align 4 - .global __isatty - .global _isatty - .word 0x30000 -__isatty: -_isatty: - sub gr1,gr1,16 - asgeu V_SPILL,gr1,gr126 - add lr1,gr1,28 - const gr116,__iostat - consth gr116,__iostat - calli lr0,gr116 - sll lr2,lr6,0 - sll gr96,gr96,30 - add gr1,gr1,16 - srl gr96,gr96,31 - jmpi lr0 - asleu V_FILL,lr1,gr127 diff --git a/newlib/libc/sys/a29khif/_lseek.s b/newlib/libc/sys/a29khif/_lseek.s deleted file mode 100644 index 56a7fc6c9..000000000 --- a/newlib/libc/sys/a29khif/_lseek.s +++ /dev/null @@ -1,42 +0,0 @@ -; @(#)_lseek.s 1.4 90/10/14 21:57:28, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _lseek.s -; int cc = _lseek( int fd, long offset, int whence ); -; - .file "_lseek.s" - .include "sys/sysmac.h" - .text - .word 0x00050000 ; Debugger tag word - .global __lseek -;; syscalls used now -- .global _lseek - - -__lseek: -;; syscalls used now -- _lseek: - const tav,HIF_lseek @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_open.s b/newlib/libc/sys/a29khif/_open.s deleted file mode 100644 index 3a9ed7e61..000000000 --- a/newlib/libc/sys/a29khif/_open.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_open.s 1.4 90/10/14 21:57:30, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _open.s -; int fd = _open( char *path, int oflag [, int mode ] ); -; - .file "_open.s" - .include "sys/sysmac.h" - .text - .word 0x00050000 ; Debugger tag word - .global __open - -__open: - const tav,HIF_open @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_query.s b/newlib/libc/sys/a29khif/_query.s deleted file mode 100644 index 6887bea93..000000000 --- a/newlib/libc/sys/a29khif/_query.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_query.s 2.2 90/10/14 21:57:31, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _query.s -; _query( query_code ); -; - .file "_query.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __query - -__query: - const tav,HIF_query @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_read.s b/newlib/libc/sys/a29khif/_read.s deleted file mode 100644 index 23ebbe732..000000000 --- a/newlib/libc/sys/a29khif/_read.s +++ /dev/null @@ -1,38 +0,0 @@ -; @(#)_read.s 1.4 90/10/14 21:57:32, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _read.s -; int nread = _read( int fd, char *buf, int count ); -; - .file "_read.s" - .include "sys/sysmac.h" - .text - .word 0x00050000 ; Debugger tag word - .global __read - -__read: - const tav,HIF_read @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - .end diff --git a/newlib/libc/sys/a29khif/_sbrk.s b/newlib/libc/sys/a29khif/_sbrk.s deleted file mode 100644 index 33c1269cd..000000000 --- a/newlib/libc/sys/a29khif/_sbrk.s +++ /dev/null @@ -1,30 +0,0 @@ - .file "sbrk.c" - .sect .lit,lit -gcc2_compiled.: - .text - .align 4 - .global __sbrk - .word 0x30000 -__sbrk: - sub gr1,gr1,16 - asgeu V_SPILL,gr1,gr126 - add lr1,gr1,28 - sll lr2,lr6,0 - jmpt lr2,L4 - constn gr96,65535 - const gr116,__sysalloc - consth gr116,__sysalloc - calli lr0,gr116 - nop - sll gr117,gr96,0 - cpneq gr116,gr117,0 - jmpf gr116,L4 - constn gr96,65535 - sll gr96,gr117,0 -L4: - add gr1,gr1,16 - nop - jmpi lr0 - asleu V_FILL,lr1,gr127 - - diff --git a/newlib/libc/sys/a29khif/_setim.s b/newlib/libc/sys/a29khif/_setim.s deleted file mode 100644 index 0cf86aeda..000000000 --- a/newlib/libc/sys/a29khif/_setim.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_setim.s 2.2 90/10/14 21:57:33, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _setim.s -; _setim( im, di ); -; - .file "_setim.s" - .include "sys/sysmac.h" - .text - .word 0x00040000 ; Debugger tag word - .global __setim - -__setim: - const tav,HIF_setim @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_settrap.s b/newlib/libc/sys/a29khif/_settrap.s deleted file mode 100644 index 259097288..000000000 --- a/newlib/libc/sys/a29khif/_settrap.s +++ /dev/null @@ -1,39 +0,0 @@ -; @(#)_settrap.s 2.2 90/10/14 21:57:34, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _settrap.s -; void *prevaddr = _settrap( int trapno, void *trapaddr ); -; - .file "_settrap.s" - .include "sys/sysmac.h" - .text - .word 0x00040000 ; Debugger tag word - .global __settrap - -__settrap: - const tav,HIF_settrap @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_setvec.s b/newlib/libc/sys/a29khif/_setvec.s deleted file mode 100644 index 09d4076f5..000000000 --- a/newlib/libc/sys/a29khif/_setvec.s +++ /dev/null @@ -1,38 +0,0 @@ -; @(#)_setvec.s 1.2 90/10/14 21:57:35, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _setvec.s -; int success = _setvec( int trap_no, void (*handler)( void ) ); -; - .file "_setvec.s" - .include "sys/sysmac.h" - .text - .word 0x00040000 ; Debugger tag word - .global __setvec - -__setvec: - const tav,HIF_setvec @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - .end diff --git a/newlib/libc/sys/a29khif/_tmpnam.s b/newlib/libc/sys/a29khif/_tmpnam.s deleted file mode 100644 index c7795e27a..000000000 --- a/newlib/libc/sys/a29khif/_tmpnam.s +++ /dev/null @@ -1,41 +0,0 @@ -; @(#)_tmpnam.s 1.2 90/10/14 21:57:36, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _tmpnam.s -; char *cp = _khif_tmpnam( char *bufr ); -; /* same as ANSI tmpnam(), but NULL arg is not allowed */ -; NOTE - Will not work on BSD (no tmpnam sys call) -; - .file "_tmpnam.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __khif_tmpnam - -__khif_tmpnam: - const tav,HIF_tmpnam @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/_write.s b/newlib/libc/sys/a29khif/_write.s deleted file mode 100644 index 21c0e5815..000000000 --- a/newlib/libc/sys/a29khif/_write.s +++ /dev/null @@ -1,40 +0,0 @@ -; @(#)_write.s 1.4 90/10/14 21:57:37, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _write.s -; int written = _write( int fd, char *buf, int count ); -; - .file "_write.s" - .include "sys/sysmac.h" - .text - .word 0x00050000 ; Debugger tag word - .global __write -;; syscalls used now -- .global _write - -__write: -;; syscalls used now -- _write: - const tav,HIF_write @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - .end diff --git a/newlib/libc/sys/a29khif/aclocal.m4 b/newlib/libc/sys/a29khif/aclocal.m4 deleted file mode 100644 index 31ccc384b..000000000 --- a/newlib/libc/sys/a29khif/aclocal.m4 +++ /dev/null @@ -1,291 +0,0 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 - -dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. - -dnl This provides configure definitions used by all the newlib -dnl configure.in files. - -dnl Basic newlib configury. This calls basic introductory stuff, -dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs -dnl configure.host. The only argument is the relative path to the top -dnl newlib directory. - -AC_DEFUN(NEWLIB_CONFIGURE, -[ -dnl Default to --enable-multilib -AC_ARG_ENABLE(multilib, -[ --enable-multilib build many library versions (default)], -[case "${enableval}" in - yes) multilib=yes ;; - no) multilib=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; - esac], [multilib=yes])dnl - -dnl Support --enable-target-optspace -AC_ARG_ENABLE(target-optspace, -[ --enable-target-optspace optimize for space], -[case "${enableval}" in - yes) target_optspace=yes ;; - no) target_optspace=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; - esac], [target_optspace=])dnl - -dnl Support --enable-malloc-debugging - currently only supported for Cygwin -AC_ARG_ENABLE(malloc-debugging, -[ --enable-malloc-debugging indicate malloc debugging requested], -[case "${enableval}" in - yes) malloc_debugging=yes ;; - no) malloc_debugging=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; - esac], [malloc_debugging=])dnl - -dnl Support --enable-newlib-mb -AC_ARG_ENABLE(newlib-mb, -[ --enable-newlib-mb enable multibyte support], -[case "${enableval}" in - yes) newlib_mb=yes ;; - no) newlib_mb=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;; - esac], [newlib_mb=no])dnl - -dnl We may get other options which we don't document: -dnl --with-target-subdir, --with-multisrctop, --with-multisubdir - -test -z "[$]{with_target_subdir}" && with_target_subdir=. - -if test "[$]{srcdir}" = "."; then - if test "[$]{with_target_subdir}" != "."; then - newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" - else - newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" - fi -else - newlib_basedir="[$]{srcdir}/$1" -fi -AC_SUBST(newlib_basedir) - -AC_CANONICAL_HOST - -AM_INIT_AUTOMAKE(newlib, 1.9.0) - -# FIXME: We temporarily define our own version of AC_PROG_CC. This is -# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -# are probably using a cross compiler, which will not be able to fully -# link an executable. This should really be fixed in autoconf -# itself. - -AC_DEFUN(LIB_AC_PROG_CC, -[AC_BEFORE([$0], [AC_PROG_CPP])dnl -AC_CHECK_PROG(CC, gcc, gcc) -if test -z "$CC"; then - AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) - test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) -fi - -AC_PROG_CC_GNU - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -dnl Check whether -g works, even if CFLAGS is set, in case the package -dnl plays around with CFLAGS (such as to build both debugging and -dnl normal versions of a library), tasteless as that idea is. - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - AC_PROG_CC_G - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi -]) - -LIB_AC_PROG_CC - -# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't -# run it explicitly here, it will be run implicitly before -# NEWLIB_CONFIGURE, which doesn't work because that means that it will -# be run before AC_CANONICAL_HOST. -AC_CANONICAL_BUILD - -AC_CHECK_TOOL(AS, as) -AC_CHECK_TOOL(AR, ar) -AC_CHECK_TOOL(RANLIB, ranlib, :) - -AC_PROG_INSTALL - -AM_MAINTAINER_MODE - -# We need AC_EXEEXT to keep automake happy in cygnus mode. However, -# at least currently, we never actually build a program, so we never -# need to use $(EXEEXT). Moreover, the test for EXEEXT normally -# fails, because we are probably configuring with a cross compiler -# which can't create executables. So we include AC_EXEEXT to keep -# automake happy, but we don't execute it, since we don't care about -# the result. -if false; then - AC_EXEEXT -fi - -. [$]{newlib_basedir}/configure.host - -case [$]{newlib_basedir} in -/* | [A-Za-z]:[/\\]*) newlib_flagbasedir=[$]{newlib_basedir} ;; -*) newlib_flagbasedir='[$](top_builddir)/'[$]{newlib_basedir} ;; -esac - -newlib_cflags="[$]{newlib_cflags} -I"'[$](top_builddir)'"/$1/targ-include -I[$]{newlib_flagbasedir}/libc/include" -case "${host}" in - *-*-cygwin*) - newlib_cflags="[$]{newlib_cflags} -I[$]{newlib_flagbasedir}/../winsup/cygwin/include -I[$]{newlib_flagbasedir}/../winsup/w32api/include" - ;; -esac - -newlib_cflags="[$]{newlib_cflags} -fno-builtin" - -NEWLIB_CFLAGS=${newlib_cflags} -AC_SUBST(NEWLIB_CFLAGS) - -AC_SUBST(machine_dir) -AC_SUBST(sys_dir) -]) - -# Do all the work for Automake. This macro actually does too much -- -# some checks are only needed if your package does certain things. -# But this isn't really a big deal. - -# serial 1 - -dnl Usage: -dnl AM_INIT_AUTOMAKE(package,version, [no-define]) - -AC_DEFUN(AM_INIT_AUTOMAKE, -[AC_REQUIRE([AC_PROG_INSTALL]) -PACKAGE=[$1] -AC_SUBST(PACKAGE) -VERSION=[$2] -AC_SUBST(VERSION) -dnl test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi -ifelse([$3],, -AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) -AC_REQUIRE([AM_SANITY_CHECK]) -AC_REQUIRE([AC_ARG_PROGRAM]) -dnl FIXME This is truly gross. -missing_dir=`cd $ac_aux_dir && pwd` -AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) -AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) -AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) -AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) -AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) -AC_REQUIRE([AC_PROG_MAKE_SET])]) - -# -# Check to make sure that the build environment is sane. -# - -AC_DEFUN(AM_SANITY_CHECK, -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftestfile -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` - if test "[$]*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftestfile` - fi - if test "[$]*" != "X $srcdir/configure conftestfile" \ - && test "[$]*" != "X conftestfile $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "[$]2" = conftestfile - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -rm -f conftest* -AC_MSG_RESULT(yes)]) - -dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) -dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, -[AC_MSG_CHECKING(for working $2) -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if ($2 --version) < /dev/null > /dev/null 2>&1; then - $1=$2 - AC_MSG_RESULT(found) -else - $1="$3/missing $2" - AC_MSG_RESULT(missing) -fi -AC_SUBST($1)]) - -# Add --enable-maintainer-mode option to configure. -# From Jim Meyering - -# serial 1 - -AC_DEFUN(AM_MAINTAINER_MODE, -[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode is disabled by default - AC_ARG_ENABLE(maintainer-mode, -[ --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - USE_MAINTAINER_MODE=$enableval, - USE_MAINTAINER_MODE=no) - AC_MSG_RESULT($USE_MAINTAINER_MODE) - AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST(MAINT)dnl -] -) - -# Define a conditional. - -AC_DEFUN(AM_CONDITIONAL, -[AC_SUBST($1_TRUE) -AC_SUBST($1_FALSE) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi]) - diff --git a/newlib/libc/sys/a29khif/alloc.s b/newlib/libc/sys/a29khif/alloc.s deleted file mode 100644 index cd90022a5..000000000 --- a/newlib/libc/sys/a29khif/alloc.s +++ /dev/null @@ -1,64 +0,0 @@ -; -;(#)_alloc.s 1.4 90/10/14 21:57:19, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; 07/06/89 (JS) Replaced call to const tav,HIF_macro -; and deleted call to reterr macro as a NULL needs to be -; returned on failure. -; _alloc.s -; void *vp = _sysalloc( int size ); -; - .file "_alloc.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global __sysalloc -__sysalloc: - const tav,HIF_alloc - asneq V_SYSCALL,gr1,gr1 - jmpti tav, lr0 - const tpc, _errno - consth tpc, _errno - store 0, 0, tav, tpc - jmpi lr0 - const v0, 0 ; return NULL on error. - -; -; int errret = _sysfree( void *addr, int size ); -; - .global __sysfree -__sysfree: - const tav,HIF_free - asneq V_SYSCALL,gr1,gr1 - jmpti tav,lr0 - const tpc,_errno - consth tpc,_errno - store 0,0,tav,tpc - jmpi lr0 - constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/clock.s b/newlib/libc/sys/a29khif/clock.s deleted file mode 100644 index 5cb26dff0..000000000 --- a/newlib/libc/sys/a29khif/clock.s +++ /dev/null @@ -1,41 +0,0 @@ -; @(#)clock.s 1.3 90/10/14 21:57:43, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; clock.s -; long ticks = clock( ); -; - .file "clock.s" - .include "sys/sysmac.h" - .text - .word 0x00020000 ; Debugger tag word - .global _clock - .global __clock - -_clock: -__clock: - const tav,HIF_clock @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/configure b/newlib/libc/sys/a29khif/configure deleted file mode 100755 index da6b4bc4d..000000000 --- a/newlib/libc/sys/a29khif/configure +++ /dev/null @@ -1,1701 +0,0 @@ -#! /bin/sh - -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help - --enable-multilib build many library versions (default)" -ac_help="$ac_help - --enable-target-optspace optimize for space" -ac_help="$ac_help - --enable-malloc-debugging indicate malloc debugging requested" -ac_help="$ac_help - --enable-newlib-mb enable multibyte support" -ac_help="$ac_help - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer" - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -sitefile= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --site-file=FILE use FILE as the site file - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -site-file | --site-file | --site-fil | --site-fi | --site-f) - ac_prev=sitefile ;; - -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) - sitefile="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=_alloc.s - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$sitefile"; then - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi - fi -else - CONFIG_SITE="$sitefile" -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - - -ac_aux_dir= -for ac_dir in ../../../.. $srcdir/../../../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:580: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_IFS" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:633: checking whether build environment is sane" >&5 -# Just in case -sleep 1 -echo timestamp > conftestfile -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftestfile` - fi - if test "$*" != "X $srcdir/configure conftestfile" \ - && test "$*" != "X conftestfile $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { echo "configure: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" 1>&2; exit 1; } - fi - - test "$2" = conftestfile - ) -then - # Ok. - : -else - { echo "configure: error: newly created file is older than distributed files! -Check your system clock" 1>&2; exit 1; } -fi -rm -f conftest* -echo "$ac_t""yes" 1>&6 -if test "$program_transform_name" = s,x,x,; then - program_transform_name= -else - # Double any \ or $. echo might interpret backslashes. - cat <<\EOF_SED > conftestsed -s,\\,\\\\,g; s,\$,$$,g -EOF_SED - program_transform_name="`echo $program_transform_name|sed -f conftestsed`" - rm -f conftestsed -fi -test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},; $program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" - -# sed with no file args requires a program. -test "$program_transform_name" = "" && program_transform_name="s,x,x," - -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:690: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -if test $host != $build; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:723: checking for Cygwin environment" >&5 -if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 728 "configure" -#include "confdefs.h" - -int main() { - -#ifndef __CYGWIN__ -#define __CYGWIN__ __CYGWIN32__ -#endif -return __CYGWIN__; -; return 0; } -EOF -if { (eval echo configure:739: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_cygwin=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_cygwin=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_cygwin" 1>&6 -CYGWIN= -test "$ac_cv_cygwin" = yes && CYGWIN=yes -echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:756: checking for mingw32 environment" >&5 -if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 761 "configure" -#include "confdefs.h" - -int main() { -return __MINGW32__; -; return 0; } -EOF -if { (eval echo configure:768: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_mingw32=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_mingw32=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_mingw32" 1>&6 -MINGW32= -test "$ac_cv_mingw32" = yes && MINGW32=yes - -# Check whether --enable-multilib or --disable-multilib was given. -if test "${enable_multilib+set}" = set; then - enableval="$enable_multilib" - case "${enableval}" in - yes) multilib=yes ;; - no) multilib=no ;; - *) { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;; - esac -else - multilib=yes -fi - -# Check whether --enable-target-optspace or --disable-target-optspace was given. -if test "${enable_target_optspace+set}" = set; then - enableval="$enable_target_optspace" - case "${enableval}" in - yes) target_optspace=yes ;; - no) target_optspace=no ;; - *) { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;; - esac -else - target_optspace= -fi - -# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. -if test "${enable_malloc_debugging+set}" = set; then - enableval="$enable_malloc_debugging" - case "${enableval}" in - yes) malloc_debugging=yes ;; - no) malloc_debugging=no ;; - *) { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;; - esac -else - malloc_debugging= -fi - -# Check whether --enable-newlib-mb or --disable-newlib-mb was given. -if test "${enable_newlib_mb+set}" = set; then - enableval="$enable_newlib_mb" - case "${enableval}" in - yes) newlib_mb=yes ;; - no) newlib_mb=no ;; - *) { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;; - esac -else - newlib_mb=no -fi - - -test -z "${with_target_subdir}" && with_target_subdir=. - -if test "${srcdir}" = "."; then - if test "${with_target_subdir}" != "."; then - newlib_basedir="${srcdir}/${with_multisrctop}../../../.." - else - newlib_basedir="${srcdir}/${with_multisrctop}../../.." - fi -else - newlib_basedir="${srcdir}/../../.." -fi - - - -# Make sure we can run config.sub. -if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi - -echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:854: checking host system type" >&5 - -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac - -host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 - - - -PACKAGE=newlib - -VERSION=1.9.0 - -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } -fi -cat >> confdefs.h <<EOF -#define PACKAGE "$PACKAGE" -EOF - -cat >> confdefs.h <<EOF -#define VERSION "$VERSION" -EOF - - - -missing_dir=`cd $ac_aux_dir && pwd` -echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:895: checking for working aclocal" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (aclocal --version) < /dev/null > /dev/null 2>&1; then - ACLOCAL=aclocal - echo "$ac_t""found" 1>&6 -else - ACLOCAL="$missing_dir/missing aclocal" - echo "$ac_t""missing" 1>&6 -fi - -echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:908: checking for working autoconf" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (autoconf --version) < /dev/null > /dev/null 2>&1; then - AUTOCONF=autoconf - echo "$ac_t""found" 1>&6 -else - AUTOCONF="$missing_dir/missing autoconf" - echo "$ac_t""missing" 1>&6 -fi - -echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:921: checking for working automake" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (automake --version) < /dev/null > /dev/null 2>&1; then - AUTOMAKE=automake - echo "$ac_t""found" 1>&6 -else - AUTOMAKE="$missing_dir/missing automake" - echo "$ac_t""missing" 1>&6 -fi - -echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:934: checking for working autoheader" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (autoheader --version) < /dev/null > /dev/null 2>&1; then - AUTOHEADER=autoheader - echo "$ac_t""found" 1>&6 -else - AUTOHEADER="$missing_dir/missing autoheader" - echo "$ac_t""missing" 1>&6 -fi - -echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:947: checking for working makeinfo" >&5 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (makeinfo --version) < /dev/null > /dev/null 2>&1; then - MAKEINFO=makeinfo - echo "$ac_t""found" 1>&6 -else - MAKEINFO="$missing_dir/missing makeinfo" - echo "$ac_t""missing" 1>&6 -fi - - - -# FIXME: We temporarily define our own version of AC_PROG_CC. This is -# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -# are probably using a cross compiler, which will not be able to fully -# link an executable. This should really be fixed in autoconf -# itself. - - - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:972: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1002: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1051: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1075: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi - - -# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't -# run it explicitly here, it will be run implicitly before -# NEWLIB_CONFIGURE, which doesn't work because that means that it will -# be run before AC_CANONICAL_HOST. -echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1108: checking build system type" >&5 - -build_alias=$build -case "$build_alias" in -NONE) - case $nonopt in - NONE) build_alias=$host_alias ;; - *) build_alias=$nonopt ;; - esac ;; -esac - -build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$build" 1>&6 - - -# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1129: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS="${ac_tool_prefix}as" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as" -fi -fi -AS="$ac_cv_prog_AS" -if test -n "$AS"; then - echo "$ac_t""$AS" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1161: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar" -fi -fi -AR="$ac_cv_prog_AR" -if test -n "$AR"; then - echo "$ac_t""$AR" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1193: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -if test -z "$ac_cv_prog_RANLIB"; then -if test -n "$ac_tool_prefix"; then - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1225: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -else - RANLIB=":" -fi -fi - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1270: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_IFS" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - -echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:1324: checking whether to enable maintainer-specific portions of Makefiles" >&5 - # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then - enableval="$enable_maintainer_mode" - USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=no -fi - - echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 - - -if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - MAINT=$MAINTAINER_MODE_TRUE - - - -# We need AC_EXEEXT to keep automake happy in cygnus mode. However, -# at least currently, we never actually build a program, so we never -# need to use $(EXEEXT). Moreover, the test for EXEEXT normally -# fails, because we are probably configuring with a cross compiler -# which can't create executables. So we include AC_EXEEXT to keep -# automake happy, but we don't execute it, since we don't care about -# the result. -if false; then - - -echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1358: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$CYGWIN" = yes || test "$MINGW32" = yes; then - ac_cv_exeext=.exe -else - rm -f conftest* - echo 'int main () { return 0; }' > conftest.$ac_ext - ac_cv_exeext= - if { (eval echo configure:1368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then - for file in conftest.*; do - case $file in - *.c | *.o | *.obj | *.ilk | *.pdb) ;; - *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; - esac - done - else - { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } - fi - rm -f conftest* - test x"${ac_cv_exeext}" = x && ac_cv_exeext=no -fi -fi - -EXEEXT="" -test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} -echo "$ac_t""${ac_cv_exeext}" 1>&6 -ac_exeext=$EXEEXT - -fi - -. ${newlib_basedir}/configure.host - -case ${newlib_basedir} in -/* | A-Za-z:/\\*) newlib_flagbasedir=${newlib_basedir} ;; -*) newlib_flagbasedir='$(top_builddir)/'${newlib_basedir} ;; -esac - -newlib_cflags="${newlib_cflags} -I"'$(top_builddir)'"/../../../targ-include -I${newlib_flagbasedir}/libc/include" -case "${host}" in - *-*-cygwin*) - newlib_cflags="${newlib_cflags} -I${newlib_flagbasedir}/../winsup/cygwin/include -I${newlib_flagbasedir}/../winsup/w32api/include" - ;; -esac - -newlib_cflags="${newlib_cflags} -fno-builtin" - -NEWLIB_CFLAGS=${newlib_cflags} - - - - - - -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -cat > conftest.defs <<\EOF -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g -s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g -s%\[%\\&%g -s%\]%\\&%g -s%\$%$$%g -EOF -DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` -rm -f conftest.defs - - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <<EOF -#! /bin/sh -# Generated automatically by configure. -# Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" - -trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS <<EOF - -# Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@newlib_basedir@%$newlib_basedir%g -s%@host@%$host%g -s%@host_alias@%$host_alias%g -s%@host_cpu@%$host_cpu%g -s%@host_vendor@%$host_vendor%g -s%@host_os@%$host_os%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@PACKAGE@%$PACKAGE%g -s%@VERSION@%$VERSION%g -s%@ACLOCAL@%$ACLOCAL%g -s%@AUTOCONF@%$AUTOCONF%g -s%@AUTOMAKE@%$AUTOMAKE%g -s%@AUTOHEADER@%$AUTOHEADER%g -s%@MAKEINFO@%$MAKEINFO%g -s%@SET_MAKE@%$SET_MAKE%g -s%@CC@%$CC%g -s%@build@%$build%g -s%@build_alias@%$build_alias%g -s%@build_cpu@%$build_cpu%g -s%@build_vendor@%$build_vendor%g -s%@build_os@%$build_os%g -s%@AS@%$AS%g -s%@AR@%$AR%g -s%@RANLIB@%$RANLIB%g -s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g -s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g -s%@MAINT@%$MAINT%g -s%@EXEEXT@%$EXEEXT%g -s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g -s%@machine_dir@%$machine_dir%g -s%@sys_dir@%$sys_dir%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <<EOF - -CONFIG_FILES=\${CONFIG_FILES-"Makefile"} -EOF -cat >> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -EOF -cat >> $CONFIG_STATUS <<EOF - -EOF -cat >> $CONFIG_STATUS <<\EOF - -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - diff --git a/newlib/libc/sys/a29khif/configure.in b/newlib/libc/sys/a29khif/configure.in deleted file mode 100644 index de247d3d3..000000000 --- a/newlib/libc/sys/a29khif/configure.in +++ /dev/null @@ -1,12 +0,0 @@ -dnl This is the newlib/libc/sys/a29khif configure.in file. -dnl Process this file with autoconf to produce a configure script. - -AC_PREREQ(2.5) -AC_INIT(_alloc.s) - -dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. -AC_CONFIG_AUX_DIR(../../../..) - -NEWLIB_CONFIGURE(../../..) - -AC_OUTPUT(Makefile) diff --git a/newlib/libc/sys/a29khif/crt0.s b/newlib/libc/sys/a29khif/crt0.s deleted file mode 100644 index 8ae79f898..000000000 --- a/newlib/libc/sys/a29khif/crt0.s +++ /dev/null @@ -1,226 +0,0 @@ -; @(#)crt0.s 2.7 90/10/15 13:17:57, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1988, 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - .file "crt0.s" -; crt0.s version 2.1-7 -; -; This module gets control from the OS. -; It saves away the Am29027 Mode register settings and -; then sets up the pointers to the resident spill and fill -; trap handlers. It then establishes argv and argc for passing -; to main. It then calls _main. If main returns, it calls _exit. -; -; void = start( ); -; NOTE - not C callable (no lead underscore) -; - .include "sys/sysmac.h" -; -; - .extern V_SPILL, V_FILL - .comm __29027Mode, 8 ; A shadow of the mode register - .comm __LibInit, 4 - .comm __environ, 4 ; Environment variables, currently none. - .text - .extern _main, _exit - .extern _memset - - .word 0 ; Terminating tag word - .global start -start: - sub gr1, gr1, 6 * 4 - asgeu V_SPILL, gr1, rab ; better not ever happen - add lr1, gr1, 6 * 4 -; -; Initialize the .bss section to zero by using the memset library function. -; The .bss initialization section below has been commented out as it breaks -; XRAY29K that has been released. The operators sizeof and startof create -; new sections that are not recognized by XRAY29k, but will be implemented -; in the next release (2.0). -; -; const lr4, $sizeof(.bss) ; get size of .bss section to zero out -; consth lr4, $sizeof(.bss) -; const lr2, $startof(.bss) ; Get start address of .bss section -; consth lr2, $startof(.bss) -; const lr0, _memset ; address of memset function -; consth lr0, _memset -; calli lr0, lr0 ; call memset function -; const lr3, 0 - -; Save the initial value of the Am29027's Mode register -; If your const tav,HIF_does @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 not enter crt0 with value for Am29027's Mode register -; in gr96 and gr97, and also if the coprocessor is active uncomment the -; next 4 lines. -; const gr96, 0xfc00820 -; consth gr96, 0xfc00820 -; const gr97, 0x1375 -; store 1, 3, gr96, gr97 -; - const gr98, __29027Mode - consth gr98, __29027Mode - store 0, 0, gr96, gr98 - add gr98, gr98, 4 - store 0, 0, gr97, gr98 -; -; Now call the const tav,HIF_to @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 setup the spill and fill trap handlers -; - const lr3, spill - consth lr3, spill - const lr2, V_SPILL - const tav,HIF_setvec @ asneq V_SYSCALL,gr1,gr1 - const lr3, fill - consth lr3, fill - const lr2, V_FILL - const tav,HIF_setvec @ asneq V_SYSCALL,gr1,gr1 -; -; Set up dividu handler, since native one don't work?! -; Set it up by hand (FIXME) since HIF_settrap doesn't work either! -; -; const lr3,Edividu -; consth lr3,Edividu -; -; const lr2,35 -; const tav,HIF_settrap @ asneq V_SYSCALL,gr1,gr1 -; asge 0x50,gr121,0 ; check whether it failed -; const lr2,0x8000008c ; abs addr of dividu trap handler on EB -; consth lr2,0x8000008c -; store 0,0,lr3,lr2 ; Clobber vector FIXME - -; -; Get the argv base address and calculate argc. -; - const tav,HIF_getargs @ asneq V_SYSCALL,gr1,gr1 - add lr3, v0, 0 ; argv - add lr4, v0, 0 - constn lr2, -1 -argcloop: ; scan for NULL terminator - load 0, 0, gr97, lr4 - add lr4, lr4, 4 - cpeq gr97, gr97, 0 - jmpf gr97, argcloop - add lr2, lr2, 1 -; -; Now call LibInit, if there is one. To aid runtime libraries -; that need to do some startup initialization, we have created -; a bss variable called LibInit. If the library doesn't need -; any run-time initialization, the variable is still 0. If the -; library does need run-time initialization, the library will -; contain a definition like -; void (*_LibInit)(void) = LibInitFunction; -; The linker will match up our bss LibInit with this data LibInit -; and the variable will not be 0. -; - const lr0, __LibInit - consth lr0, __LibInit - load 0, 0, lr0, lr0 - cpeq gr96, lr0, 0 - jmpt gr96, NoLibInit - nop - calli lr0, lr0 - nop -NoLibInit: -; -; call main, passing it 2 arguments. main( argc, argv ) -; - const lr0, _main - consth lr0, _main - calli lr0, lr0 - nop -; -; call exit -; - const lr0, _exit - consth lr0, _exit - calli lr0, lr0 - add lr2, gr96, 0 -; -; Should never get here, but just in case -; -loop: - const tav,HIF_exit @ asneq V_SYSCALL,gr1,gr1 - jmp loop - nop - .sbttl "Spill and Fill trap handlers" - .eject -; -; SPILL, FILL trap handlers -; -; Note that these Spill and Fill trap handlers allow the OS to -; assume that the only registers of use are between gr1 and rfb. -; Therefore, if the OS desires to, it may simply preserve from -; lr0 for (rfb-gr1)/4 registers when doing a context save. -; -; -; Here is the spill handler -; -; spill registers from [*gr1..*rab) -; and move rab downto where gr1 points -; -; rab must change before rfb for signals to work -; -; On entry: rfb - rab = windowsize, gr1 < rab -; Near the end: rfb - rab > windowsize, gr1 == rab -; On exit: rfb - rab = windowsize, gr1 == rab -; - .global spill -spill: - sub tav, rab, gr1 ; tav = number of bytes to spill - srl tav, tav, 2 ; change byte count to word count - sub tav, tav, 1 ; make count zero based - mtsr cr, tav ; set Count Remaining register - sub tav, rab, gr1 - sub tav, rfb, tav ; pull down free bound and save it in rab - add rab, gr1, 0 ; first pull down allocate bound - storem 0, 0, lr0, tav ; store lr0..lr(tav) into rfb - jmpi tpc ; return... - add rfb, tav, 0 -; -; Here is the fill handler -; -; fill registers from [*rfb..*lr1) -; and move rfb upto where lr1 points. -; -; rab must change before rfb for signals to work -; -; On entry: rfb - rab = windowsize, lr1 > rfb -; Near the end: rfb - rab < windowsize, lr1 == rab + windowsize -; On exit: rfb - rab = windowsize, lr1 == rfb -; - .global fill -fill: - const tav, 0x80 << 2 - or tav, tav, rfb ; tav = ((rfb>>2) | 0x80)<<2 == [rfb]<<2 - mtsr ipa, tav ; ipa = [rfb]<<2 == 1st reg to fill - ; gr0 is now the first reg to spill - sub tav, lr1, rfb ; tav = number of bytes to spill - add rab, rab, tav ; push up allocate bound - srl tav, tav, 2 ; change byte count to word count - sub tav, tav, 1 ; make count zero based - mtsr cr, tav ; set Count Remaining register - loadm 0, 0, gr0, rfb ; load registers - jmpi tpc ; return... - add rfb, lr1, 0 ; ... first pushing up free bound - - .end diff --git a/newlib/libc/sys/a29khif/getargs.s b/newlib/libc/sys/a29khif/getargs.s deleted file mode 100644 index aa1f9c442..000000000 --- a/newlib/libc/sys/a29khif/getargs.s +++ /dev/null @@ -1,38 +0,0 @@ -; @(#)getargs.s 1.2 90/10/14 21:57:44, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _getargs.s -; void _getargs( void ); -; - .file "_getargs.s" - .include "sys/sysmac.h" - .text - .word 0x00020000 ; Debugger tag word - .global __getargs - -__getargs: - const tav,HIF_getargs @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - .end diff --git a/newlib/libc/sys/a29khif/getenv.s b/newlib/libc/sys/a29khif/getenv.s deleted file mode 100644 index 4351849a0..000000000 --- a/newlib/libc/sys/a29khif/getenv.s +++ /dev/null @@ -1,48 +0,0 @@ -; @(#)getenv.s 1.4 90/10/14 21:57:45, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; getenv.s -; char *value = getenv( const char *name ); -; - .file "getenv.s" - - .include "sys/sysmac.h" - - .text - .word 0x00030000 ; Debugger tag word - .global _getenv - .global __getenv -_getenv: -__getenv: - const tav,HIF_getenv @ asneq V_SYSCALL,gr1,gr1 ; HIF service trap - jmpti tav, lr0 ; If tav is true, were finished, return. - const tpc, _errno - consth tpc, _errno ; Otherwise, - store 0, 0, tav, tpc ; store error code in _errno, - jmpi lr0 ; then return - const v0, 0 ; with a value of 0 (NULL pointer). - - .end diff --git a/newlib/libc/sys/a29khif/getpid.c b/newlib/libc/sys/a29khif/getpid.c deleted file mode 100644 index 99d88bd39..000000000 --- a/newlib/libc/sys/a29khif/getpid.c +++ /dev/null @@ -1,12 +0,0 @@ -/* Stub for getpid. */ - -#include <_ansi.h> - -/* This should really return pid_t, but that doesn't seem to be in - <sys/types.h>. */ - -int -_DEFUN_VOID (_getpid) -{ - return 1; -} diff --git a/newlib/libc/sys/a29khif/kill.c b/newlib/libc/sys/a29khif/kill.c deleted file mode 100644 index ff9fe5428..000000000 --- a/newlib/libc/sys/a29khif/kill.c +++ /dev/null @@ -1,21 +0,0 @@ -/* Stub for kill. */ - -#include <_ansi.h> -#include <errno.h> - -/* The pid argument should be of type pid_t. */ - -int -_DEFUN (_kill, (pid, sig), - int pid _AND - int sig) -{ - if (pid == 1 || pid < 0) - { - if (sig == 0) - return 0; - return raise (sig); - } - errno = EINVAL; - return -1; -} diff --git a/newlib/libc/sys/a29khif/read.s b/newlib/libc/sys/a29khif/read.s deleted file mode 100644 index 1a5daf301..000000000 --- a/newlib/libc/sys/a29khif/read.s +++ /dev/null @@ -1,54 +0,0 @@ -; @(#)_read.s 1.4 90/10/14 21:57:32, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _read.s -; int nread = _read( int fd, char *buf, int count ); -; - .file "_read.s" - .include "sys/sysmac.h" - .text - .word 0x00050000 ; Debugger tag word - .global __read -;; syscalls used now -- .global _read - -__read: -;; syscalls used now -- _read: - .ifdef _BSD_OS -; BSD version - uses readv const tav,HIF_call @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - sub msp, msp, 8 - store 0, 0, lr3, msp - add tav, msp, 4 - add lr3, msp, 0 - store 0, 0, lr4, tav - const lr4, 1 - const tav,HIF_readv @ asneq V_SYSCALL,gr1,gr1 - jmpti tav, lr0 - add msp, msp, 8 - const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - .else - const tav,HIF_read @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - .endif - .end diff --git a/newlib/libc/sys/a29khif/remove.s b/newlib/libc/sys/a29khif/remove.s deleted file mode 100644 index 948be04c2..000000000 --- a/newlib/libc/sys/a29khif/remove.s +++ /dev/null @@ -1,43 +0,0 @@ -; @(#)remove.s 1.3 90/10/14 21:57:53, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; remove.s -; int cc = remove( char *path ); -; - .file "remove.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global _remove - .global __remove - .global __unlink - -_remove: -__remove: -__unlink: - const tav,HIF_remove @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/rename.s b/newlib/libc/sys/a29khif/rename.s deleted file mode 100644 index 31da614e3..000000000 --- a/newlib/libc/sys/a29khif/rename.s +++ /dev/null @@ -1,41 +0,0 @@ -; @(#)rename.s 1.3 90/10/14 21:57:54, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; rename.s -; int cc = rename( char *from, char *to ); -; - .file "rename.s" - .include "sys/sysmac.h" - .text - .word 0x00040000 ; Debugger tag word - .global _rename - .global __rename - -_rename: -__rename: - const tav,HIF_rename @ asneq V_SYSCALL,gr1,gr1 @ jmpti tav,lr0 @ const tpc,_errno @ consth tpc,_errno @ store 0,0,tav,tpc @ jmpi lr0 @ constn v0,-1 - - .end diff --git a/newlib/libc/sys/a29khif/signal.s b/newlib/libc/sys/a29khif/signal.s deleted file mode 100644 index 29273a0d3..000000000 --- a/newlib/libc/sys/a29khif/signal.s +++ /dev/null @@ -1,452 +0,0 @@ -;@(#)signal.s 2.15 90/10/14 21:57:55, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - .file "signal.s" - -; SigEntry is the address of an array of C-level user code signal handlers. -; They must return to the top-level before doing a sigret() return function. -; Nested signals are supported. - - .extern V_SPILL, V_FILL - .extern fill ; In crt0.s - - .align 4 - .comm WindowSize, 4 - .data -SigEntry: - .word 0 ; reserved - .word 0 ; adds. of #2 SIGINT handler - .word 0 ; reserved - .word 0 ; reserved - .word 0 ; reserved - .word 0 ; reserved - .word 0 ; reserved - .word 0 ; adds. of #8 SIGFPE handler - - .text - - .reg v0, gr96 - .reg v1, gr97 - .reg v2, gr98 - .reg v3, gr99 - - .reg tav, gr121 - .reg tpc, gr122 - .reg lrp, gr123 - .reg slp, gr124 - .reg msp, gr125 - .reg rab, gr126 - .reg rfb, gr127 - -;=================================================================== setjmp() -; int -; setjmp(label_t jmpbuf) -; { -; *jmpbuf = {gr1, msp, lr0, lr1}; -; return 0; -; } -; - .global _setjmp -_setjmp: - store 0, 0, gr1, lr2 - add lr2, lr2, 4 - store 0, 0, msp, lr2 - add lr2, lr2, 4 - store 0, 0, lr0, lr2 - add lr2, lr2, 4 - store 0, 0, lr1, lr2 - jmpi lr0 - const v0, 0 -; -;==================================================================== longjmp() -; int -; longjmp(label_t jmpbuf, int value) -; { -; /* BUG: check for this -; if (msp > jmpbuf->msp || gr1 > jmpbuf->gr1) -; longjmperror(); -; */ -; -; gr1 = jmpbuf->gr1; -; lr2addr = jmpbuf->gr1 + 8; -; msp = jmpbuf->msp; -; -; /* saved lr1 is invalid if saved lr2addr > rfb */ -; if (lr2addr > rfb) { -; /* -; * None of the registers are useful. -; * Set rfb to lr2addr - 512 & rab to rfb - 512. -; * the FILL assert will take care of filling -; */ -; lr1 = jmpbuf->lr1; -; rab = lr2addr - windowsize; -; rfb = lr2addr; -; } -; -; lr0 = jmpbuf->lr0; -; if (rfb < lr1) -; raise V_FILL; -; return value; -; } -; - .global _longjmp -_longjmp: - load 0, 0, tav, lr2 ; copy in gr1 - add v1, lr2, 4 ; v1 points to msp - ; make sure we return a non-zero value - cpeq v0, lr3, 0 - srl v0, v0, 31 - or v0, lr3, v0 - - add gr1, tav, 0 ; now update gr1 - add tav, tav, 8 ; calculate lr2addr - load 0, 0, msp, v1 ; update msp from jmpbuf - cpleu v3, tav, rfb ; if (lr2addr > rfb) - jmpt v3, $1 ; { - add v1, v1, 4 ; v1 points to lr0 - add v2, v1, 4 ; v2 points to lr1 - load 0, 0, lr1, v2 ; lr1 = value from jmpbuf - sub v3, rfb, rab ; - sub rab, tav, v3 ; rab = lr2addr - windowsize - add rfb, tav, 0 ; rfb = lr2addr -$1: ; } - load 0, 0, lr0, v1 - jmpi lr0 - asgeu V_FILL, rfb, lr1 ; may fill from rfb to lr1 -; -;================================================================== sigcode -; About to deliver a signal to a user mode signal handler. -; msp+(15*4) = signal_number -; msp+(14*4) = gr1 -; msp+(13*4) = rab -; msp+(12*4) = PC0 -; msp+(11*4) = PC1 -; msp+(10*4) = PC2 -; msp+( 9*4) = CHA -; msp+( 8*4) = CHD -; msp+( 7*4) = CHC -; msp+( 6*4) = ALU -; msp+( 5*4) = OPS -; msp+( 4*4) = gr121 -; msp+( 3*4) = gr99 -; msp+( 2*4) = gr98 -; msp+( 1*4) = gr97 -; msp = gr96 -; The state of all the registers (except for msp, chc and rab) -; is the same as when the process was interrupted. -; -; We must make the stack and window consistent before calling the handler -; The orignal rab value is on the stack. The interrupt handler placed -; rfb-Windowsize in rab. This is required to support nested interrupts. -; -; Note that the window becomes incosistent only during certain -; critical sections in spill, fill, longjmp and sigcode. -; rfb - rab > windowsize => we are in spill -; rfb - rab < windowsize => we are in fill -; gr1 + 8 > rfb => we are in long-longjmp case -; In case of spill, fill and lonjmp; rab is modified first, -; so if we are in one of these critical sections, -; we set rab to rfb - WINDOWSIZE. -; - .equ SIGCTX_SIZE, (16)*4 - .equ SIGCTX_SIGNUMB, (15)*4 - .equ SIGCTX_GR1_OFFSET, (14)*4 - .equ SIGCTX_RAB_OFFSET, (13)*4 - .equ SIGCTX_PC0_OFFSET, (12)*4 - .equ SIGCTX_PC1_OFFSET, (11)*4 - .equ SIGCTX_PC2_OFFSET, (10)*4 - .equ SIGCTX_CHC_OFFSET, (7)*4 - .equ SIGCTX_OPS_OFFSET, (5)*4 - .equ SIGCTX_TAV_OFFSET, (4)*4 - .global sigcode -sigcode: -; -------------------------------------------------------- R-Stack fixup - const v0, WindowSize ; get register cache size - consth v0, WindowSize - load 0, 0, v0, v0 - add v2, msp, SIGCTX_RAB_OFFSET - load 0, 0, v2, v2 ; get interrupted rab value - sub v1, rfb, v2 ; determine if rfb-rab <= WINDOW_SIZE - cpgeu v1, v1, v0 ; - jmpt v1, nfill ; jmp if spill or 'normal' interrupt - add v1, gr1, 8 - cpgt v1, v1, rfb ; interrupted longjmp can look like fill - jmpf v1, nfill ; test for long-longjmp interruption - nop ; jmp if gr1+8 <= rfb -; Fixup signal stack to re-start interrupted fill -; backup pc1 -- this is needed for the partial fill case. -; Clear chc so an interrupted load/store does not restart. -; Reset rab to a window distance below rfb, rab shall be -; decremented again on re-starting the interrupted fill. -; The interrupt handler set rab=rfb-WindowSize. -; - add v0, msp, SIGCTX_RAB_OFFSET - store 0, 0, rab, v0 ; re-store (rfb-WindowSize) for rab - const v2, fill - consth v2, fill - add v0, msp, SIGCTX_PC1_OFFSET - store 0, 0, v2, v0 - sub v2, v2, 4 ; determine pc0 - add v0, msp, SIGCTX_PC0_OFFSET - store 0, 0, v2, v0 - const v2, 0 ; clear chc - add v0, msp, SIGCTX_CHC_OFFSET - store 0, 0, v2, v0 - -nfill: - cpgt v0, gr1, rfb ; if gr1 > rfb then gr1 = rfb - jmpt v0, lower - cplt v0, gr1, rab ; if gr1 < rab then gr1 = rab - jmpt v0, raise - nop -; -------------------------------------------------------- save_regs -sig1: sub msp, msp, (4+2+25)*4 ; reserve space for regs - mfsr gr96, ipc - mfsr gr97, ipa - mfsr gr98, ipb - mfsr gr99, q - mtsrim cr, 4-1 - storem 0, 0, gr96, msp -; "push" registers stack support - add gr96, lr1, 0 - add gr97, rfb, 0 - mtsrim cr, 2-1 - add gr99, msp, 2*4 - storem 0, 0, gr96, gr99 -; "push" remaining global registers - mtsrim cr, 25-1 ; gr100-gr124 - add gr96, msp, (4+2)*4 - storem 0, 0, gr100, gr96 -; -; -------------------------------------------------------- Dummy Call - .equ RALLOC, 4*4 ; make space for function calls - add v0, rfb, 0 ; store original rfb - sub gr1, gr1, RALLOC - asgeu V_SPILL, gr1, rab - add lr1, v0, 0 ; set lr1 = original rfb - add v1, msp, (4+2+25)*4 + SIGCTX_SIGNUMB - load 0, 0, lr2, v1 ; restore signal number - sub v1, lr2, 1 ; get handler index - sll v1, v1, 2 ; point to addresses -; -; -------------------------------------------------------- call C-level -; Handler must not use HIF services other than the _sigret() type. - const v0, SigEntry - consth v0, SigEntry - add v0, v0, v1 - load 0, 0, v0, v0 ; determine if handler registered - cpeq v1, v0, 0 - jmpt v1, NoHandler - nop - calli lr0, v0 ; call C-level signal handler - nop -; -; -------------------------------------------------------- default return -NoHandler: - jmp __sigdfl - nop - -; -------------------------------------------------------- support bits -lower: sll gr1, rfb, 0 - jmp sig1 - nop -raise: sll gr1, rab, 0 - jmp sig1 - nop -/* -; -------------------------------------------------------- repair_regs - mtsrim cr, 4-1 - loadm 0, 0, gr96, msp - mtsr ipc, gr96 - mtsr ipa, gr97 - mtsr ipb, gr98 - mtsr Q, gr99 -; "pop" registers stack support - mtsrim cr, 2-1 - add gr99, msp, 2*4 - loadm 0, 0, gr96, gr99 - add lr1, gr96, 0 - add rfb, gr97, 0 -; "pop" remaining global registers - mtsrim cr, 25-1 ; gr100-gr124 - add gr96, msp, (4+2)*4 - loadm 0, 0, gr100, gr96 - add msp, msp, (4+2+25)*4 ; repair msp to save_regs entry value -; -------------------------------------------------------- end repair -*/ - -; ======================================================== _sigret() - .global __sigret -__sigret: -; repair_regs -; -------------------------------------------------------- repair_regs - mtsrim cr, 4-1 - loadm 0, 0, gr96, msp - mtsr ipc, gr96 - mtsr ipa, gr97 - mtsr ipb, gr98 - mtsr q, gr99 -; "pop" registers stack support - mtsrim cr, 2-1 - add gr99, msp, 2*4 - loadm 0, 0, gr96, gr99 - add lr1, gr96, 0 - add rfb, gr97, 0 -; "pop" remaining global registers - mtsrim cr, 25-1 ; gr100-gr124 - add gr96, msp, (4+2)*4 - loadm 0, 0, gr100, gr96 - add msp, msp, (4+2+25)*4 ; repair msp to save_regs entry value -; -------------------------------------------------------- end repair - const tav, 323 ; HIF _sigret - asneq 69, gr1,gr1 - halt ; commit suicide if returns - -; ======================================================== _sigdfl() - .global __sigdfl -__sigdfl: -; repair_regs -; -------------------------------------------------------- repair_regs - mtsrim cr, 4-1 - loadm 0, 0, gr96, msp - mtsr ipc, gr96 - mtsr ipa, gr97 - mtsr ipb, gr98 - mtsr q, gr99 -; "pop" registers stack support - mtsrim cr, 2-1 - add gr99, msp, 2*4 - loadm 0, 0, gr96, gr99 - add lr1, gr96, 0 - add rfb, gr97, 0 -; "pop" remaining global registers - mtsrim cr, 25-1 ; gr100-gr124 - add gr96, msp, (4+2)*4 - loadm 0, 0, gr100, gr96 - add msp, msp, (4+2+25)*4 ; repair msp to save_regs entry value -; -------------------------------------------------------- end repair - const tav, 322 ; HIF _sigdfl - asneq 69, gr1,gr1 - halt ; commit suicide if returns - -; ======================================================== _sigrep() -__sigrep: - .global __sigrep -; repair_regs -; -------------------------------------------------------- repair_regs - mtsrim cr, 4-1 - loadm 0, 0, gr96, msp - mtsr ipc, gr96 - mtsr ipa, gr97 - mtsr ipb, gr98 - mtsr q, gr99 -; "pop" registers stack support - mtsrim cr, 2-1 - add gr99, msp, 2*4 - loadm 0, 0, gr96, gr99 - add lr1, gr96, 0 - add rfb, gr97, 0 -; "pop" remaining global registers - mtsrim cr, 25-1 ; gr100-gr124 - add gr96, msp, (4+2)*4 - loadm 0, 0, gr100, gr96 - add msp, msp, (4+2+25)*4 ; repair msp to save_regs entry value -; -------------------------------------------------------- end repair - const tav, 324 ; HIF _sigrep - asneq 69, gr1,gr1 - halt ; commit suicide if returns - -; ======================================================== _sigskp() - .global __sigskp -__sigskp: -; repair_regs -; -------------------------------------------------------- repair_regs - mtsrim cr, 4-1 - loadm 0, 0, gr96, msp - mtsr ipc, gr96 - mtsr ipa, gr97 - mtsr ipb, gr98 - mtsr q, gr99 -; "pop" registers stack support - mtsrim cr, 2-1 - add gr99, msp, 2*4 - loadm 0, 0, gr96, gr99 - add lr1, gr96, 0 - add rfb, gr97, 0 -; "pop" remaining global registers - mtsrim cr, 25-1 ; gr100-gr124 - add gr96, msp, (4+2)*4 - loadm 0, 0, gr100, gr96 - add msp, msp, (4+2+25)*4 ; repair msp to save_regs entry value -; -------------------------------------------------------- end repair - const tav, 325 ; HIF _sigskp - asneq 69, gr1,gr1 - halt ; commit suicide if returns - -; ======================================================== _sendsig() -; lr2 = signal number - .global _raise - .global __sendsig -_raise: -__sendsig: - const tav, 326 ; HIF sendsig - asneq 69, gr1,gr1 - jmpi lr0 - nop - -; -; ======================================================== signal() -; lr2 = signal number -; lr3 = handler address - .global _signal -_signal: -; the memory variable WindowSize must be initalised at the -; start when rfb and rab are a window size apart. - const v0, WindowSize ; get register cache size - consth v0, WindowSize - load 0, 0, v1, v0 - cpeq v1, v1, 0 - jmpf v1, WindowSizeOK - sub v1, rfb, rab ; rfb-rab = WINDOW_SIZE - store 0, 0, v1, v0 -WindowSizeOK: - const v1, SigEntry - consth v1, SigEntry - sub v3, lr2, 1 ; get handler index - sll v3, v3, 2 ; pointer to addresses - add v1, v1, v3 - store 0,0, lr3, v1 ; save new handler - - const lr2, sigcode - consth lr2, sigcode - ;Fall through to __signal -; ======================================================== _signal() - .global __signal -__signal: - const tav, 321 ; HIF signal - asneq 69, gr1,gr1 - jmpi lr0 - nop diff --git a/newlib/libc/sys/a29khif/stubs.s b/newlib/libc/sys/a29khif/stubs.s deleted file mode 100644 index e0b29bc77..000000000 --- a/newlib/libc/sys/a29khif/stubs.s +++ /dev/null @@ -1,135 +0,0 @@ -; -; -; File of stubs so that unix applications can link into a HIF monitor -; -; sac@cygnus.com - - .text - - .global _sysalloc -_sysalloc: - const gr121,__sysalloc - consth gr121,__sysalloc - jmpi gr121 - - .global _sysfree -_sysfree: - const gr121,__sysfree - consth gr121,__sysfree - jmpi gr121 - - - .global _cycles -_cycles: - const gr121,__cycles - consth gr121,__cycles - jmpi gr121 - -; .global _exit -;_exit: -; const gr121,__exit -; consth gr121,__exit -; jmpi gr121 - - .global _getpsiz -_getpsiz: - const gr121,__getpsiz - consth gr121,__getpsiz - jmpi gr121 - - .global _gettz -_gettz: - const gr121,__gettz - consth gr121,__gettz - jmpi gr121 - - .global _ioctl -_ioctl: - const gr121,__ioctl - consth gr121,__ioctl - jmpi gr121 - - - .global _iowait -_iowait: - const gr121,__iowait - consth gr121,__iowait - jmpi gr121 - - -;; syscalls used now -- .global _open -;; syscalls used now -- _open: -;; syscalls used now -- const gr121,__open -;; syscalls used now -- consth gr121,__open -;; syscalls used now -- jmpi gr121 - - .global _query -_query: - const gr121,__query - consth gr121,__query - jmpi gr121 - - - .global _setim -_setim: - const gr121,__setim - consth gr121,__setim - jmpi gr121 - - .global _settrap -_settrap: - const gr121,__settrap - consth gr121,__settrap - jmpi gr121 - - .global _setvec -_setvec: - const gr121,__setvec - consth gr121,__setvec - jmpi gr121 - - .global _getargs -_getargs: - const gr121,__getargs - consth gr121,__getargs - jmpi gr121 - -;; syscalls used now -- .global _unlink -;; syscalls used now -- _unlink: -;; syscalls used now -- const gr121,__unlink -;; syscalls used now -- consth gr121,__unlink -;; syscalls used now -- jmpi gr121 - - .global _sigret -_sigret: - const gr121,__sigret - consth gr121,__sigret - jmpi gr121 - - .global _sigdfl -_sigdfl: - const gr121,__sigdfl - consth gr121,__sigdfl - jmpi gr121 - - .global _sigrep -_sigrep: - const gr121,__sigrep - consth gr121,__sigrep - jmpi gr121 - - .global _sigskp -_sigskp: - const gr121,__sigskp - consth gr121,__sigskp - jmpi gr121 - - .global _sendsig -_sendsig: - const gr121,__sendsig - consth gr121,__sendsig - jmpi gr121 - - ; fill this jmpi delay slot - ; the others are not done since they do not matter - constn lr0,-1 diff --git a/newlib/libc/sys/a29khif/sys/cpudef.h b/newlib/libc/sys/a29khif/sys/cpudef.h deleted file mode 100644 index 4ec6ed39c..000000000 --- a/newlib/libc/sys/a29khif/sys/cpudef.h +++ /dev/null @@ -1,270 +0,0 @@ -; @(#)cpudef.h 2.3 90/10/14 20:55:56, Copyright 1989, 1990 AMD -;----------------------------------------------------------------------- -; Useful equates -;----------------------------------------------------------------------- -; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - - ; Processor status registers OPS (sr1) and CPS (sr2) - .equ CA,0x8000 ; Coprocessor active - .equ IP,0x4000 ; Interrupt pending - .equ TE,0x2000 ; Trace enable - .equ TP,0x1000 ; Trace pending - .equ TU,0x0800 ; Trap unaligned access - .equ FZ,0x0400 ; Freeze - .equ LK,0x0200 ; Lock - .equ RE,0x0100 ; ROM enable - .equ WM,0x0080 ; Wait mode - .equ PD,0x0040 ; No translation for Data - .equ PI,0x0020 ; No translation for Instr - .equ SM,0x0010 ; Supervisor mode - .equ IM,0x000C ; Interrupt mask - .equ IM1,0x0100 ; enable INTR0-1 - .equ IM2,0x1000 ; enable INTR0-2 - .equ IM3,0x1100 ; enable INTR0-3 - .equ DI,0x0002 ; Disable ints - .equ DA,0x0001 ; Disable ints and traps - - ; Configuration register CFG (sr3) - .equ PRL,0xFF000000 ; Processor release level - .equ VF,0x10 ; Vector fetch - .equ RV,0x08 ; ROM Vector area - .equ BO,0x04 ; Byte order - .equ CP,0x02 ; Coprocessor present - .equ CD,0x01 ; BTC disable - - ; Channel control register CHC (sr6) - .equ LS,0x8000 ; Load store - .equ ML,0x4000 ; Multiple operation - .equ ST,0x2000 ; Set - .equ LA,0x1000 ; Lock active - .equ TF,0x0400 ; Transaction faulted - .equ TR,0x03FC ; Target register - .equ NN,0x0002 ; Not needed - .equ CV,0x0001 ; Contents valid - - ; Timer reload register TMR (sr9) - .equ IE,0x01000000 ; timer int enable - .equ IN,0x02000000 ; timer int pending - .equ OV,0x04000000 ; timer Overflow - - ; MMU configuration register MMU (sr13) - .equ PS,0x300 ; Page size - .equ PID,0xFF ; Process identifier - - ; ALU status register ALU (sr132) - .equ DF,0x800 ; Divide flag - .equ V,0x400 ; Overflow - .equ N,0x200 ; Negative - .equ Z,0x100 ; Zero - .equ C,0x080 ; Carry - - ; TLB entry - .equ VTAG,0xFFFF8000 ; Virtual tag - .equ VE,0x4000 ; Valid entry - .equ SR,0x2000 ; Supervisor read - .equ SW,0x1000 ; Supervisor write - .equ SE,0x0800 ; Supervisor execute - .equ UR,0x0400 ; User read - .equ UW,0x0200 ; User write - .equ UE,0x0100 ; User execute - .equ TID,0x00FF ; Task identifier - .equ RPN,0xFFFFFC00 ; Real page number - .equ PGM,0x00C0 ; User programmable - .equ U,0x0002 ; Usage - .equ F,0x0001 ; Flag - -;----------------------------------------------------------------------- -;Global registers -;----------------------------------------------------------------------- - - .reg rsp, gr1 ; local register stack pointer - - ; System-wide statics - .reg s0, gr64 - .reg spillreg, s0 ; pointer to user spill handler - .reg s1, gr65 - .reg fillreg, s1 ; pointer to user fill handler - .reg s2, gr66 - .reg heapptr, s2 ; pointer to heap area - .reg s3, gr67 - .reg s4, gr68 - .reg s5, gr69 - .reg s6, gr70 - .reg s7, gr71 - .reg s8, gr72 - .reg s9, gr73 - .reg s10, gr74 - .reg s11, gr75 - .reg s12, gr76 - .reg s13, gr77 - .reg s14, gr78 - .reg s15, gr79 - - ; Interrupt handler temporaries - .reg i0, gr80 - .reg i1, gr81 - .reg i2, gr82 - .reg i3, gr83 - .reg i4, gr84 - .reg i5, gr85 - .reg i6, gr86 - .reg i7, gr87 - .reg i8, gr88 - .reg i9, gr89 - .reg i10, gr90 - .reg i11, gr91 - .reg i12, gr92 - .reg i13, gr93 - .reg i14, gr94 - .reg i15, gr95 - - ; Subroutine/function temporaries - ; also used for function return values - .reg t0, gr96 - .reg rtn, t0 - .reg t1, gr97 - .reg t2, gr98 - .reg t3, gr99 - .reg t4, gr100 - .reg t5, gr101 - .reg t6, gr102 - .reg t7, gr103 - .reg t8, gr104 - .reg t9, gr105 - .reg t10, gr106 - .reg t11, gr107 - .reg t12, gr108 - .reg t13, gr109 - .reg t14, gr110 - .reg t15, gr111 - - ; User process statics - .reg u0, gr112 - .reg u1, gr113 - .reg u2, gr114 - .reg u3, gr115 - - ; More subroutine/function temporaries - .reg t16, gr116 - .reg t17, gr117 - .reg t18, gr118 - .reg t19, gr119 - .reg t20, gr120 - - ; Older names for the same registers - .reg tmp0, gr116 - .reg tmp1, gr117 - .reg tmp2, gr118 - .reg tmp3, gr119 - .reg tmp4, gr120 - - ; Trap handler temporaries - .reg tav, gr121 ; arg/temp - .reg tpc, gr122 ; rtn/temp - - ; Linkage pointers - .reg lrp, gr123 ; large rtn ptr - .reg slp, gr124 ; static link ptr - .reg msp, gr125 ; memory stack ptr - .reg rab, gr126 ; register allocate bound - .reg rfb, gr127 ; register free bound - -;----------------------------------------------------------------------- -;Local compiler registers -; (only valid if frame has been established) -;----------------------------------------------------------------------- - - .reg p15, lr17 ; outgoing arg 16 - .reg p14, lr16 ; outgoing arg 15 - .reg p13, lr15 ; outgoing arg 14 - .reg p12, lr14 ; outgoing arg 13 - .reg p11, lr13 ; outgoing arg 12 - .reg p10, lr12 ; outgoing arg 11 - .reg p9, lr11 ; outgoing arg 10 - .reg p8, lr10 ; outgoing arg 9 - .reg p7, lr9 ; outgoing arg 8 - .reg p6, lr8 ; outgoing arg 7 - .reg p5, lr7 ; outgoing arg 6 - .reg p4, lr6 ; outgoing arg 5 - .reg p3, lr5 ; outgoing arg 4 - .reg p2, lr4 ; outgoing arg 3 - .reg p1, lr3 ; outgoing arg 2 - .reg p0, lr2 ; outgoing arg 1 - .reg fp, lr1 ; frame pointer - .reg raddr, lr0 ; return address - -;----------------------------------------------------------------------- -; Vectors -;----------------------------------------------------------------------- - - .equ V_ILLEG, 0 ; Illegal opcode - .equ V_ALIGN, 1 ; Unaligned access - .equ V_RANGE, 2 ; Out of range - .equ V_COPRE, 3 ; Coprocessor not present - .equ V_COEXC, 4 ; Coprocessor exception - .equ V_PROT, 5 ; Protection violation - .equ V_INSTR, 6 ; Instruction access exception - .equ V_DATA, 7 ; Data access exception - .equ V_UITLB, 8 ; User-mode instruction TLB miss - .equ V_UDTLB, 9 ; User-mode data TLB miss - .equ V_SITLB, 10 ; Supervisor-mode instr TLB miss - .equ V_SDTLB, 11 ; Supervisor-mode data TLB miss - .equ V_ITLB, 12 ; Instruction TLB violation - .equ V_DTLB, 13 ; Data TLB violation - .equ V_TIMER, 14 ; Timer - .equ V_TRACE, 15 ; Trace - .equ V_INTR0, 16 ; Interrupt 0 - .equ V_INTR1, 17 ; Interrupt 1 - .equ V_INTR2, 18 ; Interrupt 2 - .equ V_INTR3, 19 ; Interrupt 3 - .equ V_TRAP0, 20 ; Trap 0 - .equ V_TRAP1, 21 ; Trap 1 - -;----------------------------------------------------------------------- -;constants for LOAD and STORE operations -;----------------------------------------------------------------------- - -; CE operand values - .equ CE, 0b1 ;coprocessor enable - .equ ME, 0b0 ; memory enable - -; CNTL operand values - .equ IO, 0b1000000 ;set for I/O - .equ PA, 0b0100000 ;force physical addr - .equ SB, 0b0010000 ;set for set BP - .equ UA, 0b0001000 ;force user mode access - .equ ROM, 0b0000100 ;ROM access - .equ HWORD, 0b0000010 ;Half word access - .equ BYTE, 0b0000001 ;Byte access - .equ WORD, 0b0000000 ;Word access - -;----------------------------------------------------------------------- -; stack alignment value -;----------------------------------------------------------------------- - .equ STKALIGN, 8 ; double word align - diff --git a/newlib/libc/sys/a29khif/sys/fpsymbol.h b/newlib/libc/sys/a29khif/sys/fpsymbol.h deleted file mode 100644 index 3fc6ac88b..000000000 --- a/newlib/libc/sys/a29khif/sys/fpsymbol.h +++ /dev/null @@ -1,2970 +0,0 @@ -; @(#)fpsymbol.h 1.4 90/10/14 20:55:59, Copyright 1989, 1990 AMD -; start of fpsymbol.h file -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; ______________________________________________________________________ -;|______________________________________________________________________| -;| | -;| SYMBOLS FOR DEFINING THE INSTRUCTION WORD | -;| | -;|______________________________________________________________________| -;|______________________________________________________________________| -; -; -; Revision Information: -;------------------------------------------------------------------------ -; Date: March 31, 1989 -; Author: Roy Carlson per Bob Perlman and Richard Relph -; -; The symbols section describing transactions was modified to contain -; several new symbol values. The reason for the change was to force the -; CA bit to be set--and remain set--once code accesses the coprocessor. -; -; Future operating systems will use the Coprocessor Active (CA) bit in -; the Old Processor Status Register to determine whether or not to save -; coprocessor state, etc.. This means that the instruction control field -; Set Coprocessor Active (SA) bit should be used as follows: -; -; (1) any coprocessor STORE must have its SA bit set to 1, -; so as to set CA, -; -; and (2) any coprocessor LOAD must have its SA bit set to 0, -; so as to prevent clearing CA. -;------------------------------------------------------------------------ -; Date: 89/01/30 12:32:13; author: jim; lines added/del: 5/4 -; Corrected CP_IEEE_GRADUAL_UFLOW_MODE and CP_RMS_MASK. -; Added CP_EXCPS_POSITION, the ls bit of the CP_XXX_EXCP ensemble. -; fixed a few typos in comments. -;------------------------------------------------------------------------ -; Date: 89/01/23 18:00:26; author: jim; lines added/del: 488/468 -; Richard O. Parker -; January 5, 1989 -; -; 1) The _cp_prec_field in the "cp_build_inst", "cp_build_inst_h" -; and "cp_build_inst_l" macros was not being defined in the case -; of Am29K-supported floating-point instructions (e.g., FADD, FSUB, -; DADD, etc.). -; -; 2) The multiplexor select codes in the opcode table entries -; associated with the "cp_build_inst", "cp_build_inst_h" and -; "cp_build_inst_l" macros, pertaining to the CONVERT_F_TO_D -; and CONVERT_D_TO_F instructions were incorrect. -;------------------------------------------------------------------------ -; Date: 88/12/20 14:28:26; author: jim; lines added/del: 1/1 -; Larry Westerman corrected definition of CP_MOVE_P. -; Version required for Release 1.1 of the Intrinsics shipped 12/12/88. -;------------------------------------------------------------------------ -; Date: 88/11/18 15:44:45; author: law; -; Initial revision -; -; -;======================================================================== -; -; The following mnemonics are used to specify the 14 LSBs of the -; instruction word (fields SIP, SIQ, SIT, SIF, IF, and CO). -; -;======================================================================== -; -; floating point operation codes. -; - .equ CP_PASS_P, 0x00000000 ; pass P - .equ CP_MINUSP, 0x00000040 ; -P - .equ CP_ABSP, 0x00000080 ; |P| - .equ CP_SIGNT_TIMES_ABSP, 0x00000C00 ; SIGN(T) * |P| -; - .equ CP_P_PLUS_T, 0x00000001 ; P + T - .equ CP_P_MINUS_T, 0x00000101 ; P - T - .equ CP_MINUSP_PLUS_T, 0x00001001 ; -P + T - .equ CP_MINUSP_MINUS_T, 0x00001101 ; -P - T - .equ CP_ABS_P_PLUS_T, 0x00000081 ; |P + T| - .equ CP_ABS_P_MINUS_T, 0x00000181 ; |P - T| - .equ CP_ABSP_PLUS_ABST, 0x00002201 ; |P| + |T| - .equ CP_ABSP_MINUS_ABST, 0x00002301 ; |P| - |T| - .equ CP_ABS_ABSP_MINUS_ABST, 0x00002381 ; ||P| - |T|| -; - .equ CP_P_TIMES_Q, 0x00000002 ; P * Q - .equ CP_MINUSP_TIMES_Q, 0x00001002 ; -P * Q - .equ CP_ABS_P_TIMES_Q, 0x00000082 ; |P * Q| -; - .equ CP_COMPARE_P_AND_T, 0x00000103 ; compare P and T -; - .equ CP_MAX_P_AND_T, 0x00000104 ; max P,T - .equ CP_MAX_ABSP_AND_ABST, 0x00002304 ; max |P|, |T| -; - .equ CP_MIN_P_AND_T, 0x00001005 ; min P,T - .equ CP_MIN_ABSP_AND_ABST, 0x00003205 ; min |P|,|T| - .equ CP_LIMIT_P_TO_MAGT, 0x00003A05 ; limit P to magnitude of T -; - .equ CP_CONVERT_T_TO_INT, 0x00000006 ; convert T to integer -; - .equ CP_SCALE_T_TO_INT_BY_Q, 0x00000007 ; scale T to integer by Q -; - .equ CP_PQ_PLUS_T, 0x00000008 ; (P * Q) + T - .equ CP_MINUSPQ_PLUS_T, 0x00001008 ; (-P * Q) + T - .equ CP_PQ_MINUS_T, 0x00000108 ; (P * Q) - T - .equ CP_MINUSPQ_MINUS_T, 0x00001108 ; (-P * Q) - T - .equ CP_ABSPQ_PLUS_ABST, 0x00002A08 ; |(P * Q)| + T - .equ CP_MINUSABSPQ_PLUS_ABST, 0x00003A08 ;-|(P * Q)| + T - .equ CP_ABSPQ_MINUS_ABST, 0x00002B08 ; |(P * Q)| - |T| -; - .equ CP_ROUND_T_TO_INT, 0x00000009 ; round T to integral value -; - .equ CP_RECIPROCAL_OF_P, 0x0000000A ; reciprocal of P -; - .equ CP_CONVERT_T_TO_ALT, 0x0000000B ; convert T to alt. f.p. format - .equ CP_CONVERT_T_FROM_ALT, 0x0000000C ; convert T to alt. f.p. format -; -; -; integer operation codes. -; - .equ CP_I_PASS_P, 0x00000020 ; integer pass P - .equ CP_I_MINUSP, 0x00000060 ; integer -P - .equ CP_I_ABSP, 0x000000A0 ; integer |P| - .equ CP_I_SIGNT_TIMES_ABSP, 0x00000C20 ; integer SIGN(T) * |P| -; - .equ CP_I_P_PLUS_T, 0x00000021 ; integer P + T - .equ CP_I_P_MINUS_T, 0x00000121 ; integer P - T - .equ CP_I_MINUSP_PLUS_T, 0x00001021 ; integer -P + T - .equ CP_I_ABS_P_PLUS_T, 0x000000A1 ; integer |P + T| - .equ CP_I_ABS_P_MINUS_T, 0x000001A1 ; integer |P - T| -; - .equ CP_I_P_TIMES_Q, 0x00000022 ; integer P * Q -; - .equ CP_I_COMPARE_P_AND_T, 0x00000123 ; integer compare P and T -; - .equ CP_I_MAX_P_AND_T, 0x00000124 ; integer max P,T -; - .equ CP_I_MIN_P_AND_T, 0x00001025 ; integer min P,T -; - .equ CP_I_CONVERT_T_TO_FLOAT, 0x00000026 ; integer convert T to f.p. -; - .equ CP_I_SCALE_T_TO_FLOAT_BY_Q, 0x00000027 ; integer scale T to f.p. by Q -; - .equ CP_I_P_OR_T, 0x00000030 ; integer P OR T -; - .equ CP_I_P_AND_T, 0x00000031 ; integer P AND T -; - .equ CP_I_P_XOR_T, 0x00000032 ; integer P XOR T -; - .equ CP_I_NOT_T, 0x00000032 ; integer NOT T -; - .equ CP_I_LSHIFT_P_BY_Q, 0x00000033 ; integer logical shift P by Q -; places -; - .equ CP_I_ASHIFT_P_BY_Q, 0x00000034 ; integer arith. shift P by Q -; places -; - .equ CP_I_FSHIFT_PT_BY_Q, 0x00000035 ; integer funnel shift PT by Q -; places -; -; -; move instruction (f.p. or integer) -; - .equ CP_MOVE_P, 0x00000018 ; move operand P -; -; -;======================================================================== -; -; precision codes for the the operands in registers R and S, and for -; the result (instruction word fields IPR, RPR). -; -;======================================================================== -; -; - .equ CP_D_S, 0x00008000 ;Double result, single input(s) - .equ CP_S_D, 0x00004000 ;Single result, double input(s) - .equ CP_D_D, 0x00000000 ;Double result, double input(s) - .equ CP_S_S, 0x0000C000 ;Single result, single input(s) -; -;======================================================================== -; -; The following mnemonics are used to specify the 16 LSBs of an Am29027 -; instruction word for floating-point instructions supported by the -; Am29000 instruction set. -; -;======================================================================== -; - .equ CP_FADD, 0x0000C001 - .equ CP_DADD, 0x00000001 - .equ CP_FSUB, 0x0000C101 - .equ CP_DSUB, 0x00000101 - .equ CP_FMUL, 0x0000C002 - .equ CP_DMUL, 0x00000002 - .equ CP_FEQ, 0x0000C103 - .equ CP_DEQ, 0x00000103 - .equ CP_FGE, 0x0000C103 - .equ CP_DGE, 0x00000103 - .equ CP_FGT, 0x0000C103 - .equ CP_DGT, 0x00000103 - .equ CP_CONVERT_I_TO_F, 0x0000C026 ; CONVERT (int -> s.p.) - .equ CP_CONVERT_I_TO_D, 0x00008026 ; CONVERT (int -> d.p.) - .equ CP_CONVERT_F_TO_I, 0x0000C006 ; CONVERT (s.p.-> int) - .equ CP_CONVERT_D_TO_I, 0x00004006 ; CONVERT (d.p.-> int) - .equ CP_CONVERT_F_TO_D, 0x00008000 ; CONVERT (s.p.-> d.p.) - .equ CP_CONVERT_D_TO_F, 0x00004000 ; CONVERT (d.p.-> s.p.) -; -; -;======================================================================== -; -; operand select codes (instruction word fields PMS, QMS, TMS). -; -;======================================================================== -; -; - .equ CP_P_EQ_R, 0x00000000 - .equ CP_P_EQ_S, 0x01000000 - .equ CP_P_EQ_0, 0x02000000 - .equ CP_P_EQ_ONE_HALF, 0x03000000 - .equ CP_P_EQ_IMINUS1, 0x03000000 - .equ CP_P_EQ_1, 0x04000000 - .equ CP_P_EQ_2, 0x05000000 - .equ CP_P_EQ_3, 0x06000000 - .equ CP_P_EQ_PI, 0x07000000 - .equ CP_P_EQ_IMINUSMAX, 0x07000000 - .equ CP_P_EQ_RF0, 0x08000000 - .equ CP_P_EQ_RF1, 0x09000000 - .equ CP_P_EQ_RF2, 0x0A000000 - .equ CP_P_EQ_RF3, 0x0B000000 - .equ CP_P_EQ_RF4, 0x0C000000 - .equ CP_P_EQ_RF5, 0x0D000000 - .equ CP_P_EQ_RF6, 0x0E000000 - .equ CP_P_EQ_RF7, 0x0F000000 -; - .equ CP_Q_EQ_R, 0x00000000 - .equ CP_Q_EQ_S, 0x00100000 - .equ CP_Q_EQ_0, 0x00200000 - .equ CP_Q_EQ_ONE_HALF, 0x00300000 - .equ CP_Q_EQ_IMINUS1, 0x00300000 - .equ CP_Q_EQ_1, 0x00400000 - .equ CP_Q_EQ_2, 0x00500000 - .equ CP_Q_EQ_3, 0x00600000 - .equ CP_Q_EQ_PI, 0x00700000 - .equ CP_Q_EQ_IMINUSMAX, 0x00700000 - .equ CP_Q_EQ_RF0, 0x00800000 - .equ CP_Q_EQ_RF1, 0x00900000 - .equ CP_Q_EQ_RF2, 0x00A00000 - .equ CP_Q_EQ_RF3, 0x00B00000 - .equ CP_Q_EQ_RF4, 0x00C00000 - .equ CP_Q_EQ_RF5, 0x00D00000 - .equ CP_Q_EQ_RF6, 0x00E00000 - .equ CP_Q_EQ_RF7, 0x00F00000 -; - .equ CP_T_EQ_R, 0x00000000 - .equ CP_T_EQ_S, 0x00010000 - .equ CP_T_EQ_0, 0x00020000 - .equ CP_T_EQ_ONE_HALF, 0x00030000 - .equ CP_T_EQ_IMINUS1, 0x00030000 - .equ CP_T_EQ_1, 0x00040000 - .equ CP_T_EQ_2, 0x00050000 - .equ CP_T_EQ_3, 0x00060000 - .equ CP_T_EQ_PI, 0x00070000 - .equ CP_T_EQ_IMINUSMAX, 0x00070000 - .equ CP_T_EQ_RF0, 0x00080000 - .equ CP_T_EQ_RF1, 0x00090000 - .equ CP_T_EQ_RF2, 0x000A0000 - .equ CP_T_EQ_RF3, 0x000B0000 - .equ CP_T_EQ_RF4, 0x000C0000 - .equ CP_T_EQ_RF5, 0x000D0000 - .equ CP_T_EQ_RF6, 0x000E0000 - .equ CP_T_EQ_RF7, 0x000F0000 -; -; -;======================================================================== -; -; destination select codes (instruction word fields RF, RFS) -; -;======================================================================== -; -; - .equ CP_DEST_EQ_GP, 0x00000000 - .equ CP_DEST_EQ_RF0, 0x80000000 - .equ CP_DEST_EQ_RF1, 0x90000000 - .equ CP_DEST_EQ_RF2, 0xA0000000 - .equ CP_DEST_EQ_RF3, 0xB0000000 - .equ CP_DEST_EQ_RF4, 0xC0000000 - .equ CP_DEST_EQ_RF5, 0xD0000000 - .equ CP_DEST_EQ_RF6, 0xE0000000 - .equ CP_DEST_EQ_RF7, 0xF0000000 -; -; -; ______________________________________________________________________ -;|______________________________________________________________________| -;| | -;| SYMBOLS FOR DEFINING THE MODE REGISTER DOUBLE WORD | -;| | -;|______________________________________________________________________| -;|______________________________________________________________________| -; -; -; - .equ CP_PFF_MASK, 0x00000003 ; primary f.p. format mask - .equ CP_PFF_EQ_IEEE, 0x00000000 ; primary f.p. format = IEEE - .equ CP_PFF_EQ_DECD, 0x00000001 ; primary f.p. format = DEC D - .equ CP_PFF_EQ_DECG, 0x00000002 ; primary f.p. format = DEC G - .equ CP_PFF_EQ_IBM, 0x00000003 ; primary f.p. format = IBM - .equ CP_PFF_POSITION, 0 -; - .equ CP_AFF_MASK, 0x0000000C ; alternate f.p. format mask - .equ CP_AFF_EQ_IEEE, 0x00000000 ; alternate f.p. format = IEEE - .equ CP_AFF_EQ_DECD, 0x00000004 ; alternate f.p. format = DEC D - .equ CP_AFF_EQ_DECG, 0x00000008 ; alternate f.p. format = DEC G - .equ CP_AFF_EQ_IBM, 0x0000000C ; alternate f.p. format = IBM - .equ CP_AFF_POSITION, 2 -; - .equ CP_SAT_MASK, 0x00000010 ; saturate mode (SAT) mask - .equ CP_SATURATE_MODE, 0x00000010 ; enable saturate mode (SAT=1) - .equ CP_SAT_POSITION, 4 -; - .equ CP_AP_MASK, 0x00000020 ; affine/proj. mode (AP) mask - .equ CP_AFFINE_MODE, 0x00000020 ; enable affine mode (AP=1) - .equ CP_PROJECTIVE_MODE, 0x00000000 ; enable projective mode (AP=0) - .equ CP_AP_POSITION, 5 -; - .equ CP_TRP_MASK, 0x00000040 ; IEEE trap mode (TRP) mask - .equ CP_IEEE_TRAPS_ENABLED, 0x00000040 ; IEEE trap mode enabled (TRP=1) - .equ CP_IEEE_TRAPS_DISABLED, 0x00000000 ; IEEE trap mode disabled (TRP=0) - .equ CP_TRP_POSITION, 6 -; - .equ CP_SU_MASK, 0x00000080 ; IEEE sud. uflow (SU) mask - .equ CP_IEEE_SUDDEN_UFLOW_MODE, 0x00000080 ; IEEE sud. uflow mode (SU=1) - .equ CP_IEEE_GRADUAL_UFLOW_MODE,0x00000000 ; IEEE grad uflow mode (SU=0) - .equ CP_SU_POSITION, 7 -; - .equ CP_BS_MASK, 0x00000100 ; IBM sig. mask (BS) - .equ CP_BS_POSITION, 8 -; - .equ CP_BU_MASK, 0x00000200 ; IBM underflow mask (BU) - .equ CP_BU_POSITION, 9 -; - .equ CP_MS_MASK, 0x00000800 ; signed int. mpy (MS) mask - .equ CP_SIGNED_INT_MPY_MODE, 0x00000800 ; signed int. mpy mode (MS=1) - .equ CP_UNSIGNED_INT_MPY_MODE, 0x00000000 ; unsigned int. mpy mode (MS=0) - .equ CP_MS_POSITION, 11 -; - .equ CP_MF_MASK, 0x00003000 ; int. mult. fmt. mode (MF) mask - .equ CP_MF_EQ_LSBS, 0x00000000 ; int. mult. fmt. = LSBs - .equ CP_MF_EQ_LSBSFA, 0x00001000 ; int. mult. fmt. = LSBs,fmt. adj. - .equ CP_MF_EQ_MSBS, 0x00002000 ; int. mult. fmt. = MSBs - .equ CP_MF_EQ_MSBSFA, 0x00003000 ; int. mult. fmt. = MSBs,fmt. adj. - .equ CP_MF_POSITION, 12 -; - .equ CP_RMS_MASK, 0x0001C000 ; round mode (RMS) mask - .equ CP_RMS_EQ_NEAREST, 0x00000000 ; round mode = to nearest - .equ CP_RMS_EQ_MINUS_INF, 0x00004000 ; round mode = toward -oo - .equ CP_RMS_EQ_PLUS_INF, 0x00008000 ; round mode = toward +oo - .equ CP_RMS_EQ_ZERO, 0x0000C000 ; round mode = toward zero - .equ CP_RMS_POSITION, 14 -; - .equ CP_PL_MASK, 0x00100000 ; pipeline mode (PL) mask - .equ CP_FLOWTHROUGH_MODE, 0x00000000 ; select flow-through mode - .equ CP_PIPELINE_MODE, 0x00100000 ; select pipeline mode - .equ CP_PL_POSITION, 20 -; - .equ CP_INVALID_OP_EXCP_MASK, 0x00400000 ; invalid operation excp. mask(IM) - .equ CP_RESERVED_OP_EXCP_MASK,0x00800000 ; reserved operand excp. mask(RM) - .equ CP_OVERFLOW_EXCP_MASK, 0x01000000 ; overflow exception mask (VM) - .equ CP_UNDERFLOW_EXCP_MASK, 0x02000000 ; underflow exception mask(UM) - .equ CP_INEXACT_EXCP_MASK, 0x04000000 ; inexact result excp. mask(XM) - .equ CP_ZERO_EXCP_MASK, 0x08000000 ; zero result exception mask (ZM) - .equ CP_EXCPS_POSITION, 22 -; - .equ CP_PLTC_MASK, 0x0000000F ; pipeline timer count (PLTC) mask - .equ CP_PLTC_EQ_2, 0x00000002 ; pipeline timer count = 2 - .equ CP_PLTC_EQ_3, 0x00000003 ; pipeline timer count = 3 - .equ CP_PLTC_EQ_4, 0x00000004 ; pipeline timer count = 4 - .equ CP_PLTC_EQ_5, 0x00000005 ; pipeline timer count = 5 - .equ CP_PLTC_EQ_6, 0x00000006 ; pipeline timer count = 6 - .equ CP_PLTC_EQ_7, 0x00000007 ; pipeline timer count = 7 - .equ CP_PLTC_EQ_8, 0x00000008 ; pipeline timer count = 8 - .equ CP_PLTC_EQ_9, 0x00000009 ; pipeline timer count = 9 - .equ CP_PLTC_EQ_10, 0x0000000A ; pipeline timer count = 10 - .equ CP_PLTC_EQ_11, 0x0000000B ; pipeline timer count = 11 - .equ CP_PLTC_EQ_12, 0x0000000C ; pipeline timer count = 12 - .equ CP_PLTC_EQ_13, 0x0000000D ; pipeline timer count = 13 - .equ CP_PLTC_EQ_14, 0x0000000E ; pipeline timer count = 14 - .equ CP_PLTC_EQ_15, 0x0000000F ; pipeline timer count = 15 - .equ CP_PLTC_POSITION, 0 -; - .equ CP_MATC_MASK, 0x000000F0 ; mpy-acc timer count (MATC) mask - .equ CP_MATC_EQ_2, 0x00000020 ; mpy-acc timer count = 2 - .equ CP_MATC_EQ_3, 0x00000030 ; mpy-acc timer count = 3 - .equ CP_MATC_EQ_4, 0x00000040 ; mpy-acc timer count = 4 - .equ CP_MATC_EQ_5, 0x00000050 ; mpy-acc timer count = 5 - .equ CP_MATC_EQ_6, 0x00000060 ; mpy-acc timer count = 6 - .equ CP_MATC_EQ_7, 0x00000070 ; mpy-acc timer count = 7 - .equ CP_MATC_EQ_8, 0x00000080 ; mpy-acc timer count = 8 - .equ CP_MATC_EQ_9, 0x00000090 ; mpy-acc timer count = 9 - .equ CP_MATC_EQ_10, 0x000000A0 ; mpy-acc timer count = 10 - .equ CP_MATC_EQ_11, 0x000000B0 ; mpy-acc timer count = 11 - .equ CP_MATC_EQ_12, 0x000000C0 ; mpy-acc timer count = 12 - .equ CP_MATC_EQ_13, 0x000000D0 ; mpy-acc timer count = 13 - .equ CP_MATC_EQ_14, 0x000000E0 ; mpy-acc timer count = 14 - .equ CP_MATC_EQ_15, 0x000000F0 ; mpy-acc timer count = 15 - .equ CP_MATC_POSITION, 4 -; - .equ CP_MVTC_MASK, 0x00000F00 ; MOVE P timer count (MVTC) mask - .equ CP_MVTC_EQ_2, 0x00000200 ; MOVE P timer count = 2 - .equ CP_MVTC_EQ_3, 0x00000300 ; MOVE P timer count = 3 - .equ CP_MVTC_EQ_4, 0x00000400 ; MOVE P timer count = 4 - .equ CP_MVTC_EQ_5, 0x00000500 ; MOVE P timer count = 5 - .equ CP_MVTC_EQ_6, 0x00000600 ; MOVE P timer count = 6 - .equ CP_MVTC_EQ_7, 0x00000700 ; MOVE P timer count = 7 - .equ CP_MVTC_EQ_8, 0x00000800 ; MOVE P timer count = 8 - .equ CP_MVTC_EQ_9, 0x00000900 ; MOVE P timer count = 9 - .equ CP_MVTC_EQ_10, 0x00000A00 ; MOVE P timer count = 10 - .equ CP_MVTC_EQ_11, 0x00000B00 ; MOVE P timer count = 11 - .equ CP_MVTC_EQ_12, 0x00000C00 ; MOVE P timer count = 12 - .equ CP_MVTC_EQ_13, 0x00000D00 ; MOVE P timer count = 13 - .equ CP_MVTC_EQ_14, 0x00000E00 ; MOVE P timer count = 14 - .equ CP_MVTC_EQ_15, 0x00000F00 ; MOVE P timer count = 15 - .equ CP_MVTC_POSITION, 8 -; - .equ CP_AD_MASK, 0x00001000 ; - .equ CP_ADVANCE_DRDY_MODE, 0x00001000 ; - .equ CP_NORMAL_DRDY_MODE, 0x00000000 ; - .equ CP_AD_POSITION, 12 -; - .equ CP_HE_MASK, 0x00002000 ; Halt-on-error mask (HE) - .equ CP_HALT_ON_ERROR_ENABLED, 0x00002000 ; Halt-on-error enabled (HE=1) - .equ CP_HALT_ON_ERROR_DISABLED,0x00000000 ; Halt-on-error disabled (HE=0) - .equ CP_HE_POSITION, 13 -; - .equ CP_EX_MASK, 0x00004000 ; EXCP enable mask (EX) - .equ CP_EXCP_ENABLED, 0x00004000 ; EXCP enabled (EX=1) - .equ CP_EXCP_DISABLED, 0x00000000 ; EXCP disabled (EX=0) - .equ CP_EX_POSITION, 14 -; -; -; -; ______________________________________________________________________ -;|______________________________________________________________________| -;| | -;| SYMBOLS FOR DEFINING THE STATUS REGISTER WORD | -;| | -;|______________________________________________________________________| -;|______________________________________________________________________| -; -; - .equ CP_INVALID_OP_EXCP, 0x00000001 - .equ CP_INVALID_OP_EXCP_POSITION, 0 -; - .equ CP_RESERVED_OP_EXCP, 0x00000002 - .equ CP_RESERVED_OP_EXCP_POSITION, 1 -; - .equ CP_OVERFLOW_EXCP, 0x00000004 - .equ CP_OVERFLOW_EXCP_POSITION, 2 -; - .equ CP_UNDERFLOW_EXCP, 0x00000008 - .equ CP_UNDERFLOW_EXCP_POSITION, 3 -; - .equ CP_INEXACT_EXCP, 0x00000010 - .equ CP_INEXACT_EXCP_POSITION, 4 -; - .equ CP_ZERO_EXCP, 0x00000020 - .equ CP_ZERO_EXCP_POSITION, 5 -; - .equ CP_EXCP_STATUS_MASK, 0x00000040 - .equ CP_EXCP_STATUS_FLAG_POSITION, 6 -; - .equ CP_R_TEMP_VALID_MASK, 0x00000080 - .equ R_TEMP_VALID_POSITION, 7 -; - .equ CP_S_TEMP_VALID_MASK, 0x00000100 - .equ CP_S_TEMP_VALID_POSITION, 8 -; - .equ CP_I_TEMP_VALID_FLAG, 0x00000200 - .equ CP_I_TEMP_VALID_POSITION, 9 -; - .equ CP_OPERATION_PENDING_MASK, 0x00000400 - .equ CP_OPERATION_PENDING_POSITION,10 -; -; -; ______________________________________________________________________ -;|______________________________________________________________________| -;| | -;| SYMBOLS FOR DEFINING THE FLAG REGISTER WORD | -;| | -;|______________________________________________________________________| -;|______________________________________________________________________| -; -; - .equ CP_INVALID_OP_FLAG, 0x00000001 - .equ CP_INVALID_OP_FLAG_POSITION, 0 -; - .equ CP_CARRY_FLAG, 0x00000001 - .equ CP_CARRY_FLAG_POSITION, 0 -; - .equ CP_RESERVED_OP_FLAG, 0x00000002 - .equ CP_RESERVED_OP_FLAG_POSITION, 1 -; - .equ CP_OVERFLOW_FLAG, 0x00000004 - .equ CP_OVERFLOW_FLAG_POSITION, 2 -; - .equ CP_UNORDERED_FLAG, 0x00000004 - .equ CP_UNORDERED_FLAG_POSITION, 2 -; - .equ CP_UNDERFLOW_FLAG, 0x00000008 - .equ CP_UNDERFLOW_FLAG_POSITION, 3 -; - .equ CP_LESS_THAN_FLAG, 0x00000008 - .equ CP_LESS_THAN_POSITION, 3 -; - .equ CP_WINNER_FLAG, 0x00000008 - .equ CP_WINNER_FLAG_POSITION, 3 -; - .equ CP_INEXACT_FLAG, 0x00000010 - .equ CP_INEXACT_FLAG_POSITION, 4 -; - .equ CP_GREATER_THAN_FLAG, 0x00000010 - .equ CP_GREATER_THAN_FLAG_POSITION,4 -; - .equ CP_ZERO_FLAG, 0x00000020 - .equ CP_ZERO_FLAG_POSITION, 5 -; - .equ CP_EQUAL_FLAG, 0x00000020 - .equ CP_EQUAL_FLAG_POSITION, 5 -; - .equ CP_SIGN_FLAG, 0x00000040 - .equ CP_SIGN_FLAG_POSITION, 6 -; -; -; ______________________________________________________________________ -;|______________________________________________________________________| -;| | -;| SYMBOLS FOR TRANSACTION REQUEST TYPES | -;| | -;|______________________________________________________________________| -;|______________________________________________________________________| -; -; -; write requests -; -; Note: Each WRITE_* transaction request, plus ADV_TEMPS sets the CA -; (Coprocessor Active) bit in the 29000 Current Processor Status Register. -; - .equ CP_WRITE_R, 0x20 ;write sing or doub to R register - .equ CP_WRITE_S, 0x21 ;write sing or doub to S register - .equ CP_WRITE_RS, 0x22 ;write sing operands to R and S - .equ CP_WRITE_MODE, 0x23 ;write mode double word to 29027 - .equ CP_WRITE_STATUS, 0x24 ;write status word to 29027 - .equ CP_WRITE_PREC, 0x25 ;write reg. file precision word - ; to 29027 - .equ CP_WRITE_INST, 0x26 ;write instruction to 29027 - .equ CP_ADV_TEMPS, 0x27 ;move R-Temp, S-Temp into R,S -; -; read requests -; - .equ CP_READ_MSBS, 0x00 ;read sing result or MSB of doub - .equ CP_READ_LSBS, 0x01 ;read LSB of doub result - .equ CP_READ_FLAGS, 0x02 ;read 29027 flag register - .equ CP_READ_STATUS, 0x03 ;read 29027 status register - .equ CP_SAVE_STATE, 0x04 ;read one word of 29027 state -; -; "start operation" symbol; this is "OR"ed with a WRITE_R, WRITE_S, -; WRITE_RS, or WRITE_INST symbol. -; - - .equ CP_START, 0b1000000 ;bit to start 29027 operation -; -; "suppress exceptions reporting" symbol; this is "OR"ed with a ed -; -; - - .equ CP_NO_ERR, 0b1000000 ;suppress exception reporting -; ; during load. -; cp_write_r - transfers 32- or 64-bit operand to Am29027 -; register R -; cp_write_s - transfers 32- or 64-bit operand to Am29027 -; register S -; cp_write_rs - transfers two 32-bit floating-point operands to -; Am29027 registers R and S -; cp_write_prec - transfers a word to the Am29027 precision register -; cp_write_status - transfers a word to the Am29027 status register -; cp_write_inst - transfers an instruction to the Am29027 -; instruction register -; cp_advance_temps - transfers the contents of the Am29027 temporary -; registers to the corresponding working registers -; cp_write_mode - transfers a mode specification the the Am29027 -; mode register -; cp_read_dp - read a double-precision floating-point result -; from the Am29027 -; cp_read_sp - read a single-precision floating-point result -; from the Am29027 -; cp_read_int - read an integer result from the Am29027 -; cp_read_flags - read the contents of the Am29027 flag register -; cp_read_status - read the contents of the Am29027 status register -; cp_read_state_wd - read a single Am29027 state word -; cp_save_state - save Am29027 state -; cp_restore_state - restore Am29027 state -; cp_build_inst - build an Am29027 instruction -; cp_build_inst_h - build 16 MSBs of an Am29027 instruction -; cp_build_inst_l - build 16 LSBs of an Am29027 instruction -; -; -; -;============================================================================ -; MACRO NAME: cp_write_r -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 16, 1988 -; -; FUNCTION: Transfers a 32- or 64-bit operand to Am29027 input register R -; -; PARAMETERS: -; reg - the Am29000 g.p. register containing the 32-bit operand to be -; transferred, or the 32 MSBs of the 64-bit operand to be -; transferred. -; -; LSB_reg - the Am29000 g.p. register containing the 32 LSBs of the -; 64-bit operand to be transferred -; -; INT - indicates that the operand to be transferred is a 32-bit -; integer -; -; START - indicates that a new Am29027 operation is to be started -; once the operand has been transferred -; -; -; USAGE: -; -; cp_write_r reg [,LSB_reg] [,START] for floating-point operands -; or cp_write_r reg, INT [,START] for integer operands -; -; Transferring double-precision floating-point operands - Either of -; two forms is acceptable: -; -; cp_write_r reg -; or cp_write_r reg, LSB_reg -; -; If LSB_reg is omitted, the LSBs are taken from the next g.p. -; register. -; -; Ex: cp_write_r lr2 Transfers the contents of lr2 to -; the most-significant half of Am29027 -; register R, and the contents of lr3 -; to the least-significant half. -; -; cp_write_r lr2,lr5 Transfers the contents of lr2 to -; the most-significant half of Am29027 -; register R, and the contents of lr5 -; to the least-significant half. -; -; -; Transferring single-precision floating-point operands - Use the -; form: -; -; cp_write_r reg -; -; -; Ex: cp_write_r lr2 Transfers the contents of lr2 to -; the most-significant half of Am29027 -; register R, (the contents of lr3 -; will be transferred to the least- -; significant half of register R, but -; these bits are don't cares). -; -; -; Transferring integer operands - Use the form: -; -; cp_write_r reg,INT -; -; -; Ex: cp_write_r lr2,INT Transfers the contents of lr2 to -; the least-significant half of Am29027 -; register R, (the contents of lr2 -; will also be transferred to the most- -; significant half of register R, but -; these bits are don't cares). -; -; -; Starting an Am29027 operation - Any of the forms above may be -; appended with parameter START, e.g.: -; -; cp_write_r lr2,START -; -; cp_write_r lr2,lr5,START -; -; cp_write_r lr2,INT,START -; -; -;============================================================================ -; - .macro cp_write_r,p1,p2,p3 -; - .if $narg==0 - .err - .print "cp_WRITE_R: missing parameter(s)" - .endif -; -; - .if $narg==1 - store 1,CP_WRITE_R,p1,%%((&p1)+1) - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","INT" - store 1,CP_WRITE_R,p1,p1 - .exitm - .endif -; - .ifeqs "@p2@","START" - store 1,CP_WRITE_R|CP_START,p1,%%((&p1)+1) - .exitm - .endif -; - store 1,CP_WRITE_R,p1,p2 - .exitm -; - .endif -; -; - .if $narg==3 -; - .ifeqs "@p2@","START" - .ifeqs "@p3@","INT" - store 1,CP_WRITE_R|CP_START,p1,p1 - .else - .err - .print "cp_write_r: bad parameter list" - .endif - .exitm - .endif -; - .ifeqs "@p2@","INT" - .ifeqs "@p3@","START" - store 1,CP_WRITE_R|CP_START,p1,p1 - .else - .err - .print "cp_write_r: bad parameter list" - .endif - .exitm - .endif -; - .ifeqs "@p3@","START" - store 1,CP_WRITE_R|CP_START,p1,p2 - .else - .err - .print "cp_write_r: bad parameter list" - .endif - .exitm -; - .endif -; -; - .if $narg>=4 - .err - .print "cp_write_r: too many parameters" - .endif -; - .endm -; -; -; -; -; -;============================================================================ -; MACRO NAME: cp_write_s -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 16, 1988 -; -; FUNCTION: Transfers a 32- or 64-bit operand to Am29027 input register S -; -; PARAMETERS: -; reg - the Am29000 g.p. register containing the 32-bit operand to be -; transferred, or the 32 MSBs of the 64-bit operand to be -; transferred. -; -; LSB_reg - the Am29000 g.p. register containing the 32 LSBs of the -; 64-bit operand to be transferred -; -; INT - indicates that the operand to be transferred is a 32-bit -; integer -; -; START - indicates that a new Am29027 operation is to be started -; once the operand has been transferred -; -; -; USAGE: -; -; cp_write_s reg [,LSB_reg] [,START] for floating-point operands -; or cp_write_s reg, INT [,START] for integer operands -; -; Transferring double-precision floating-point operands - Either of -; two forms is acceptable: -; -; cp_write_s reg -; or cp_write_s reg, LSB_reg -; -; If LSB_reg is omitted, the LSBs are taken from the next g.p. -; register. -; -; Ex: cp_write_s lr2 Transfers the contents of lr2 to -; the most-significant half of Am29027 -; register S, and the contents of lr3 -; to the least-significant half. -; -; cp_write_s lr2,lr5 Transfers the contents of lr2 to -; the most-significant half of Am29027 -; register S, and the contents of lr5 -; to the least-significant half. -; -; -; Transferring single-precision floating-point operands - Use the -; form: -; -; cp_write_s reg -; -; -; Ex: cp_write_s lr2 Transfers the contents of lr2 to -; the most-significant half of Am29027 -; register S, (the contents of lr3 -; will be transferred to the least- -; significant half of register S, but -; these bits are don't cares). -; -; -; Transferring integer operands - Use the form: -; -; cp_write_s reg,INT -; -; -; Ex: cp_write_s lr2,INT Transfers the contents of lr2 to -; the least-significant half of Am29027 -; register S, (the contents of lr2 -; will also be transferred to the most- -; significant half of register S, but -; these bits are don't cares). -; -; -; Starting an Am29027 operation - Any of the forms above may be -; appended with parameter START, e.g.: -; -; cp_write_s lr2,START -; -; cp_write_s lr2,lr5,START -; -; cp_write_s lr2,INT,START -; -; -;============================================================================ -; - .macro cp_write_s,p1,p2,p3 -; - .if $narg==0 - .err - .print "cp_write_s: missing parameter(s)" - .endif -; -; - .if $narg==1 - store 1,CP_WRITE_S,p1,%%((&p1)+1) - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","INT" - store 1,CP_WRITE_S,p1,p1 - .exitm - .endif -; - .ifeqs "@p2@","START" - store 1,CP_WRITE_S|CP_START,p1,%%((&p1)+1) - .exitm - .endif -; - store 1,CP_WRITE_S,p1,p2 - .exitm -; - .endif -; -; - .if $narg==3 -; - .ifeqs "@p2@","START" - .ifeqs "@p3@","INT" - store 1,CP_WRITE_S|CP_START,p1,p1 - .else - .err - .print "cp_write_s: bad parameter list" - .endif - .exitm - .endif -; - .ifeqs "@p2@","INT" - .ifeqs "@p3@","START" - store 1,CP_WRITE_S|CP_START,p1,p1 - .else - .err - .print "cp_write_s: bad parameter list" - .endif - .exitm - .endif -; - .ifeqs "@p3@","START" - store 1,CP_WRITE_S|CP_START,p1,p2 - .else - .err - .print "cp_write_s: bad parameter list" - .endif - .exitm -; - .endif -; -; - .if $narg>=4 - .err - .print "cp_write_s: too many parameters" - .endif -; - .endm -; -; -; -; -;============================================================================ -; MACRO NAME: cp_write_rs -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 16, 1988 -; -; FUNCTION: Transfers two 32-bit floating-point operands to Am29027 -; input registers R and S -; -; PARAMETERS: -; reg1 - the Am29000 g.p. register containing the 32-bit operand to be -; transferred to register R -; -; reg2 - the Am29000 g.p. register containing the 32-bit operand to be -; transferred to register S -; -; START - indicates that a new Am29027 operation is to be started -; once the operands have been transferred -; -; -; USAGE: -; -; cp_write_rs reg1, reg2 [,START] -; -; Ex: cp_write_rs lr2,lr5 Transfers the contents of lr2 to -; the most-significant half of Am29027 -; register R, and the contents of lr5 -; to the most-significant half of Am29027 -; register S. -; -; cp_write_rs lr2,lr5,START Transfers the contents of lr2 to -; the most-significant half of Am29027 -; register R, and the contents of lr5 -; to the most-significant half of Am29027 -; register S; a new operation is started -; once the transfer is complete. -; -; -; -;============================================================================ -; - .macro cp_write_rs,p1,p2,p3 -; -; - .if $narg<=1 - .err - .print "cp_write_rs: missing parameter(s)" - .exitm - .endif -; -; - .if $narg==2 - .ifeqs "@p2@","START" - .err - .print "cp_write_rs: bad parameter list" - .else - store 1,CP_WRITE_RS,p1,p2 - .endif - .exitm - .endif -; -; - .if $narg==3 - .ifeqs "@p3@","START" - store 1,CP_WRITE_RS|CP_START,p1,p2 - .else - .err - .print "cp_write_rs: bad parameter list" - .endif - .exitm - .endif -; -; - .if $narg>=4 - .err - .print "cp_write_rs: too many parameters" - .exitm - .endif -; - .endm -; -; -; -; -; -; -;============================================================================ -; MACRO NAME: cp_write_prec -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 16, 1988 -; -; FUNCTION: Transfers a word to the Am29027 precision register -; -; PARAMETERS: -; reg - the Am29000 g.p. register containing the word to be -; transferred to the Am29027 precision register -; -; USAGE: -; -; cp_write_prec reg -; -; Ex: cp_write_prec lr2 Transfers the contents of lr2 to -; the Am29027 precision register. -; -; -;============================================================================ -; - .macro cp_write_prec,p1 -; -; - .if $narg!=1 - .err - .print "cp_write_prec: bad parameter list" - .else - store 1,CP_WRITE_PREC,p1,0 - .endif -; - .endm -; -; -; -; -; -; -;============================================================================ -; MACRO NAME: cp_write_status -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 16, 1988 -; -; FUNCTION: Transfers a word to the Am29027 precision register -; -; PARAMETERS: -; reg - the Am29000 g.p. register containing the word to be -; transferred to the Am29027 status register -; -; RESTORE - indicates that this is the last step of a state restoration -; sequence (flow-through mode only) -; -; INVALIDATE - indicates that the current contents of the ALU pipeline -; register are to be invalidated (pipeline mode only) -; -; USAGE: -; -; cp_write_status reg [,RESTORE|INVALIDATE] -; -; Ex: cp_write_status lr2 Transfers the contents of lr2 to -; the Am29027 status register. -; -; -; cp_write_status lr2,RESTORE Transfers the contents of lr2 to -; the Am29027 status register, and -; completes the state restore -; sequence -; -; cp_write_status lr2,INVALIDATE Transfers the contents of lr2 to -; the Am29027 status register, and -; invalidates the contents of the -; ALU pipeline. -; -; -;============================================================================ -; - .macro cp_write_status,p1,p2 -; - .if $narg==0 - .err - .print "cp_write_status: missing parameter(s)" - .endif -; -; - .if $narg==1 - store 1,CP_WRITE_STATUS,p1,0 - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","RESTORE" - store 1,CP_WRITE_STATUS|CP_START,p1,0 - .exitm - .endif -; - .ifeqs "@p2@","INVALIDATE" - store 1,CP_WRITE_STATUS|CP_START,p1,0 - .exitm - .endif -; - .err - .print "cp_write_status: bad parameter list" - .exitm -; - .endif -; -; - .if $narg >=3 - .err - .print "cp_write_status: too many parameters" - .exitm - .endif -; - .endm -; -; -; -; -; -;============================================================================ -; MACRO NAME: cp_write_inst -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 16, 1988 -; -; FUNCTION: Transfers an instruction word to the Am29027 instruction -; register -; -; PARAMETERS: -; reg - the Am29000 g.p. register containing the word to be -; transferred to the Am29027 instruction register -; -; START - indicates that a new Am29027 operation is to be started -; once the instruction word has been transferred -; -; USAGE: -; -; cp_write_inst reg [,START] -; -; Ex: cp_write_inst lr2 Transfers the contents of lr2 to -; the Am29027 instruction register. -; -; -; cp_write_inst lr2,START Transfers the contents of lr2 to -; the Am29027 status register; a -; new operation is started once the -; transfer is complete. -; -; -;============================================================================ -; - .macro cp_write_inst,p1,p2 -; - .if $narg==0 - .err - .print "cp_write_inst: missing parameter(s)" - .endif -; -; - .if $narg==1 - store 1,CP_WRITE_INST,p1,p1 - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","START" - store 1,CP_WRITE_INST|CP_START,p1,p1 - .else - .err - .print "cp_write_inst: bad parameter list" - .endif - .exitm -; - .endif -; -; - .if $narg >=3 - .err - .print "cp_write_inst: too many parameters" - .exitm - .endif -; - .endm -; -; -; -; -; -; -;============================================================================ -; MACRO NAME: cp_advance_temps -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 17, 1988 -; -; FUNCTION: Transfers the contents of Am29027 registers R-Temp, S-Temp, -; and I-Temp to register R, register S, and the instruction -; register, respectively. -; -; PARAMETERS: none -; -; USAGE: -; -; cp_advance_temps -; -; -; -;============================================================================ -; - .macro cp_advance_temps -; -; - .if $narg!=0 - .err - .print "cp_advance_temp: takes no parameters" - .else - store 1,CP_ADV_TEMPS,gr1,0 ; use gr1 because it's never protected - .endif -; - .endm -; -; -; -; -;============================================================================ -; MACRO NAME: cp_write_mode -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 17, 1988 -; -; FUNCTION: Transfers a 64-bit mode specification to the Am29027 mode -; register -; -; PARAMETERS: -; reg - the Am29000 g.p. register containing the 32 MSBs of the -; 64-bit mode specification to be transferred. -; -; LSB_reg - the Am29000 g.p. register containing the 32 LSBs of the -; 64-bit mode specification to be transferred. -; -; USAGE: -; -; cp_write_mode reg [,LSB_reg] -; -; Either of two forms is acceptable: -; -; cp_write_mode reg -; or cp_write_mode reg, LSB_reg -; -; If LSB_reg is omitted, the LSBs are taken from the next g.p. -; register. -; -; Ex: cp_write_mode lr2 Transfers the contents of lr2 to -; the most-significant half of the Am29027 -; mode register, and the contents of lr3 -; to the least-significant half. -; -; cp_write_mode lr2,lr5 Transfers the contents of lr2 to -; the most-significant half of the Am29027 -; mode register, and the contents of lr5 -; to the least-significant half. -; -; -; -;============================================================================ -; - .macro cp_write_mode,p1,p2 -; - .if $narg==0 - .err - .print "cp_write_mode: missing parameter(s)" - .endif -; -; - .if $narg==1 - store 1,CP_WRITE_MODE,%%((&p1)+1),p1 - .exitm - .endif -; -; - .if $narg==2 - store 1,CP_WRITE_MODE,p2,p1 - .exitm - .endif -; -; - .if $narg>=3 - .err - .print "cp_write_mode: too many parameters" - .endif -; - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_read_dp -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 17, 1988 -; -; FUNCTION: Transfers the current Am29027 double-precison floating-point -; result to the Am29000 -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the 32 MSBs of the -; current Am29027 result are to be written. -; -; LSB_reg - the Am29000 g.p. register into which the 32 LSBs of the -; current Am29027 result are to be written. -; -; NO_ERR - indicates that exception reporting is to be suppressed for this -; transfer. -; -; USAGE: -; -; cp_read_dp reg [,LSB_reg] [,START] -; -; Either of two forms is acceptable: -; -; cp_read_dp reg -; or cp_read_dp reg, LSB_reg -; -; If LSB_reg is omitted, the LSBs are written to the next g.p. register. -; -; Ex: cp_read_dp lr2 Transfers the 32 MSBs of the current -; Am29027 result to lr2, and the 32 LSBs -; to lr3. -; -; cp_read_dp lr2,lr5 Transfers the 32 MSBs of the current -; Am29027 result to lr2, and the 32 LSBs -; to lr5. -; -; Exception reporting can be suppressed by appending NO_ERR to either -; of the above, e.g.: -; -; cp_read_dp lr2,NO_ERR -; cp_read_dp lr2,lr5,NO_ERR -; -; -;============================================================================ -; - .macro cp_read_dp,p1,p2,p3 -; - .if $narg==0 - .err - .print "cp_read_dp: missing parameter(s)" - .endif -; -; - .if $narg==1 - load 1,CP_READ_LSBS,%%((&p1)+1),0 - load 1,CP_READ_MSBS,p1,0 - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","NO_ERR" - load 1,CP_READ_LSBS|CP_NO_ERR,%%((&p1)+1),0 - load 1,CP_READ_MSBS|CP_NO_ERR,p1,0 - .exitm - .endif -; - load 1,CP_READ_LSBS,p2,0 - load 1,CP_READ_MSBS,p1,0 - .exitm -; - .endif -; -; - .if $narg==3 -; - .ifeqs "@p3@","NO_ERR" - load 1,CP_READ_LSBS|CP_NO_ERR,p2,0 - load 1,CP_READ_MSBS|CP_NO_ERR,p1,0 - .else - .err - .print "cp_read_dp: bad parameter list" - .endif - .exitm -; - .endif -; -; - .if $narg>=4 - .err - .print "cp_read_dp: too many parameters" - .endif -; - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_read_sp -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 17, 1988 -; -; FUNCTION: Transfers the current Am29027 single-precison floating-point -; result to the Am29000 -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the current Am29027 -; result is to be written. -; -; NO_ERR - indicates that exception reporting is to be suppressed for this -; transfer. -; -; USAGE: -; -; cp_read_sp reg [,START] -; -; Ex: cp_read_sp lr2 Transfers the current Am29027 result -; to lr2. -; -; cp_read_sp lr2,NO_ERR Transfers the current Am29027 result -; to lr2, and suppresses exception -; reporting for this transfer. -; -; -;============================================================================ -; - .macro cp_read_sp,p1,p2 -; - .if $narg==0 - .err - .print "cp_read_sp: missing parameter(s)" - .endif -; -; - .if $narg==1 - load 1,CP_READ_MSBS,p1,0 - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","NO_ERR" - load 1,CP_READ_MSBS|CP_NO_ERR,p1,0 - .else - .err - .print "cp_read_sp: bad parameter list" - .endif - .exitm -; - .endif -; -; - .if $narg>=3 - .err - .print "cp_read_sp: too many parameters" - .endif -; - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_read_int -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 17, 1988 -; -; FUNCTION: Transfers the current Am29027 integer result to the Am29000 -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the current Am29027 -; result is to be written. -; -; NO_ERR - indicates that exception reporting is to be suppressed for this -; transfer. -; -; USAGE: -; -; cp_read_int reg [,START] -; -; Ex: cp_read_int lr2 Transfers the current Am29027 result -; to lr2. -; -; cp_read_int lr2,NO_ERR Transfers the current Am29027 result -; to lr2, and suppresses exception -; reporting for this transfer. -; -; -;============================================================================ -; - .macro cp_read_int,p1,p2 -; - .if $narg==0 - .err - .print "cp_read_int: missing parameter(s)" - .endif -; -; - .if $narg==1 - load 1,CP_READ_LSBS,p1,0 - nop ; leave a cycle for the MSBs to come out - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","NO_ERR" - load 1,CP_READ_LSBS|CP_NO_ERR,p1,0 - nop ; leave a cycle for the MSBs to come out - .else - .err - .print "cp_read_int: bad parameter list" - .endif - .exitm -; - .endif -; -; - .if $narg>=3 - .err - .print "cp_read_int: too many parameters" - .endif -; - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_read_flags -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 17, 1988 -; -; FUNCTION: Transfers the contents of the Am29027 flag register -; to the Am29000 -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the current Am29027 -; flag register contents are to be written. -; -; NO_ERR - indicates that exception reporting is to be suppressed for this -; transfer. -; -; USAGE: -; -; cp_read_flags reg [,START] -; -; Ex: cp_read_flags lr2 Transfers the Am29027 flag register -; contents to lr2. -; -; cp_read_flags lr2,NO_ERR Transfers the Am29027 flag register -; contents to lr2, and suppresses -; exception reporting for this -; transfer. -; -; -;============================================================================ -; - .macro cp_read_flags,p1,p2 -; - .if $narg==0 - .err - .print "cp_read_flags: missing parameter(s)" - .endif -; -; - .if $narg==1 - load 1,CP_READ_FLAGS,p1,0 - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","NO_ERR" - load 1,CP_READ_FLAGS|CP_NO_ERR,p1,0 - .else - .err - .print "cp_read_flags: bad parameter list" - .endif - .exitm -; - .endif -; -; - .if $narg>=3 - .err - .print "cp_read_flags: too many parameters" - .endif -; - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_read_status -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 18, 1988 -; -; FUNCTION: Transfers the contents of the Am29027 status register -; to the Am29000 -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the current Am29027 -; status register contents are to be written. -; -; NO_ERR - indicates that exception reporting is to be suppressed for this -; transfer. -; -; USAGE: -; -; cp_read_status reg [,START] -; -; Ex: cp_read_status lr2 Transfers the Am29027 status register -; contents to lr2. -; -; cp_read_status lr2,NO_ERR Transfers the Am29027 status register -; contents to lr2, and suppresses -; exception reporting for this -; transfer. -; -; -;============================================================================ -; - .macro cp_read_status,p1,p2 -; - .if $narg==0 - .err - .print "cp_read_status: missing parameter(s)" - .endif -; -; - .if $narg==1 - load 1,CP_READ_STATUS,p1,0 - .exitm - .endif -; -; - .if $narg==2 -; - .ifeqs "@p2@","NO_ERR" - load 1,CP_READ_STATUS|CP_NO_ERR,p1,0 - .else - .err - .print "cp_read_status: bad parameter list" - .endif - .exitm -; - .endif -; -; - .if $narg>=3 - .err - .print "cp_read_status: too many parameters" - .endif -; - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_read_state_wd -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 18, 1988 -; -; FUNCTION: Transfers the next Am29027 state word to the Am29000 -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the next Am29027 -; state word contents are to be written. -; -; USAGE: -; -; cp_read_state_wd reg -; -; Ex: cp_read_state_wd lr2 Transfers the next Am29027 state word -; to lr2. -; -;============================================================================ -; - .macro cp_read_state_wd,p1 -; - .if $narg==0 - .err - .print "cp_read_state_wd: missing parameter" - .endif -; -; - .if $narg==1 - load 1,CP_SAVE_STATE,p1,0 - .exitm - .endif -; -; - .if $narg>=2 - .err - .print "cp_read_state_wd: too many parameters" - .endif -; - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_save_state -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 18, 1988 -; -; FUNCTION: Transfers the current Am29027 state to the Am29000 -; -; PARAMETERS: -; reg - the first of 30 Am29000 g.p. registers in which Am29027 state -; is saved. -; -; USAGE: -; -; cp_save_state reg -; -; This macro transfers the current Am29027 state to a block of 30 Am29000 -; registers. State is stored in the following order: -; -; reg instruction register -; reg+1 I-Temp -; reg+2 R MSBs -; reg+3 R LSBs -; reg+4 S MSBs -; reg+5 S LSBs -; reg+6 R-Temp MSBs -; reg+7 R-Temp LSBs -; reg+8 S-Temp MSBs -; reg+9 S-Temp LSBs -; reg+10 status -; reg+11 precision -; reg+12 RF0 MSBs -; reg+13 RF0 LSBs -; . . -; . . -; . . -; reg+26 RF7 MSBs -; reg+27 RF7 LSBs -; reg+28 mode MSBs -; reg+29 mode LSBs -; -; -; Ex: cp_save_state lr2 Transfers the current Am29027 state to -; the Am29000, starting at lr2. -; -; NOTES: -; 1) This macro stores all 64-bit quantities in "big-endian" order, -; i.e. MSBs first. For example, the 32 MSBs of register R are -; stored in reg+2, and the 32 LSBs are stored in reg+3. The Am29027 -; transfers these quantites in "little-endian" order; the macro -; is responsible for swapping MS and LS words. -; -;============================================================================ -; - .macro cp_save_state,p1 -; - .if $narg==0 - .err - .print "cp_save_state: missing parameter" - .endif -; -; - .if $narg==1 - cp_read_sp p1,NO_ERR - ;guarantee that we're at beginning of - ; save state sequence - cp_read_state_wd %%((&p1)+ 0) ; instruction - cp_read_state_wd %%((&p1)+ 1) ; I-Temp - cp_read_state_wd %%((&p1)+ 3) ; R MSBs - cp_read_state_wd %%((&p1)+ 2) ; R LSBs - cp_read_state_wd %%((&p1)+ 5) ; S MSBs - cp_read_state_wd %%((&p1)+ 4) ; S LSBs - cp_read_state_wd %%((&p1)+ 7) ; R-Temp MSBs - cp_read_state_wd %%((&p1)+ 6) ; R-Temp LSBs - cp_read_state_wd %%((&p1)+ 9) ; S-Temp MSBs - cp_read_state_wd %%((&p1)+ 8) ; S-Temp LSBs - cp_read_state_wd %%((&p1)+10) ; status - cp_read_state_wd %%((&p1)+11) ; precision - cp_read_state_wd %%((&p1)+13) ; RF0 MSBs - cp_read_state_wd %%((&p1)+12) ; RF0 LSBs - cp_read_state_wd %%((&p1)+15) ; RF1 MSBs - cp_read_state_wd %%((&p1)+14) ; RF1 LSBs - cp_read_state_wd %%((&p1)+17) ; RF2 MSBs - cp_read_state_wd %%((&p1)+16) ; RF2 LSBs - cp_read_state_wd %%((&p1)+19) ; RF3 MSBs - cp_read_state_wd %%((&p1)+18) ; RF3 LSBs - cp_read_state_wd %%((&p1)+21) ; RF4 MSBs - cp_read_state_wd %%((&p1)+20) ; RF4 LSBs - cp_read_state_wd %%((&p1)+23) ; RF5 MSBs - cp_read_state_wd %%((&p1)+22) ; RF5 LSBs - cp_read_state_wd %%((&p1)+25) ; RF6 MSBs - cp_read_state_wd %%((&p1)+24) ; RF6 LSBs - cp_read_state_wd %%((&p1)+27) ; RF7 MSBs - cp_read_state_wd %%((&p1)+26) ; RF7 LSBs - cp_read_state_wd %%((&p1)+29) ; mode MSBs - cp_read_state_wd %%((&p1)+28) ; mode LSBs - .exitm - .endif -; -; - .if $narg>=2 - .err - .print "cp_save_state: too many parameters" - .endif -; - .endm -; -; -; -; -; -;============================================================================ -; MACRO NAME: cp_restore_state -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 18, 1988 -; -; FUNCTION: Restores Am29027 state -; -; PARAMETERS: -; reg - the first of 30 Am29000 g.p. registers containing Am29027 -; state. -; -; temp - a scratch register used by cp_restore_state -; -; USAGE: -; -; cp_restore_state reg,temp -; -; This macro restores Am29027 state by transferring 30 words to the -; Am29027; these words are taken from a block of Am29000 g.p. registers -; starting at "reg." The words are assumed to be stored in the following -; order: -; -; reg instruction register -; reg+1 I-Temp -; reg+2 R MSBs -; reg+3 R LSBs -; reg+4 S MSBs -; reg+5 S LSBs -; reg+6 R-Temp MSBs -; reg+7 R-Temp LSBs -; reg+8 S-Temp MSBs -; reg+9 S-Temp LSBs -; reg+10 status -; reg+11 precision -; reg+12 RF0 MSBs -; reg+13 RF0 LSBs -; . . -; . . -; . . -; reg+26 RF7 MSBs -; reg+27 RF7 LSBs -; reg+28 mode MSBs -; reg+29 mode LSBs -; -; -; Ex: cp_restore_state lr2,gr70 Restores Am29027 state by -; transferring a block of 30 words -; that begins at lr2. Register gr70 -; is used as scratch storage by this -; macro. -; -; -;============================================================================ -; - .macro cp_restore_state,p1,p2 -; - .if $narg<=1 - .err - .print "cp_restore_state: missing parameter(s)" - .endif -; -; - .if $narg==2 - - const p2,0 ;clear the status register - cp_write_status p2 -; - cp_write_mode %%((&p1)+28) ;restore the mode register -; - const p2,0x80000018 ; restore RF0 - consth p2,0x80000018 - cp_write_inst p2 - cp_write_r %%((&p1)+12),START -; - consth p2,0x90000018 ; restore RF1 - cp_write_inst p2 - cp_write_r %%((&p1)+14),START -; - consth p2,0xA0000018 ; restore RF2 - cp_write_inst p2 - cp_write_r %%((&p1)+16),START -; - consth p2,0xB0000018 ; restore RF3 - cp_write_inst p2 - cp_write_r %%((&p1)+18),START -; - consth p2,0xC0000018 ; restore RF4 - cp_write_inst p2 - cp_write_r %%((&p1)+20),START -; - consth p2,0xD0000018 ; restore RF5 - cp_write_inst p2 - cp_write_r %%((&p1)+22),START -; - consth p2,0xE0000018 ; restore RF6 - cp_write_inst p2 - cp_write_r %%((&p1)+24),START -; - consth p2,0xF0000018 ; restore RF7 - cp_write_inst p2 - cp_write_r %%((&p1)+26),START -; - cp_read_sp p2 ; do a dummy read, to guarantee that - ; the last operation is complete -; - cp_write_prec %%((&p1)+11) ; restore precision -; - cp_write_r %%((&p1)+2) ; restore R - cp_write_s %%((&p1)+4) ; restore S - cp_write_inst %%((&p1)+0) ; restore instruction - cp_advance_temps ; move R,S, and inst. to working registers -; - cp_write_r %%((&p1)+6) ; restore R-Temp - cp_write_s %%((&p1)+8) ; restore S-Temp - cp_write_inst %%((&p1)+1) ; restore I-Temp -; -; restore the status register, retime last operation -; - cp_write_status %%((&p1)+10),RESTORE -; - .exitm - .endif -; -; - .if $narg>=3 - .err - .print "cp_restore_state: too many parameters" - .endif -; - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_build_inst -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 24, 1988 -; : January 4, 1989 Rich Parker -; -; FUNCTION: Builds a 32-bit Am29027 instruction in an Am29000 g.p. -; register. -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the instruction word -; is to be written -; -; op_code - mnemonic specifying the operation to be performed -; (e.g. FADD, P_TIMES_Q) -; -; precision - precision specification for destination, source operands: -; D_S - double-prec. result, single-prec. input(s) -; D_D - double-prec. result, double-prec. input(s) -; S_S - single-prec. result, single-prec. input(s) -; S_D - single-prec. result, double-prec. input(s) -; -; dest - destination for the operation result: -; RF0 - store result in Am29027 register file location RF0 -; RF1 - store result in Am29027 register file location RF1 -; RF2 - store result in Am29027 register file location RF2 -; RF3 - store result in Am29027 register file location RF3 -; RF4 - store result in Am29027 register file location RF4 -; RF5 - store result in Am29027 register file location RF5 -; RF6 - store result in Am29027 register file location RF6 -; RF7 - store result in Am29027 register file location RF7 -; GP - result is to be stored in an Am29000 g.p. register -; with a read_dp, read_sp, or read_int macro. -; -; source1, -; source2, -; source3 - source operand specifications: -; R - take source from Am29027 register R -; S - take source from Am29027 register S -; RF0 - take source from Am29027 register file location RF0 -; RF1 - take source from Am29027 register file location RF1 -; RF2 - take source from Am29027 register file location RF2 -; RF3 - take source from Am29027 register file location RF3 -; RF4 - take source from Am29027 register file location RF4 -; RF5 - take source from Am29027 register file location RF5 -; RF6 - take source from Am29027 register file location RF6 -; RF7 - take source from Am29027 register file location RF7 -; 0 - source is 0 -; ONE_HALF - source is constant .5 (f.p. operations only) -; IMINUS1 - source is constant -1 (integer operations only) -; 1 - source is constant 1 -; 2 - source is constant 2 -; 3 - source is constant 3 -; PI - source is constant pi (f.p. operations only) -; IMINUSMAX - source is -(2**63) (integer operations only) -; -; -; USAGE: -; -; cp_build_inst reg,op_code,[precision,]dest,source1[,source2][,source3] -; -; Op-codes fall into two categories: those that correspond to Am29000 -; floating-point op-codes, and for which the precision is implicit (e.g. -; FADD, DMUL); and those that correspond to Am29027 base operations -; (e.g. P_PLUS_T, P_TIMES_Q), and which require an explicit precision -; specification. -; -; Every operation specified must have a destination; if the operation -; does not write a result to the Am29027 register file, destination GP -; must be specified. The number of source operands specified must agree -; with the number of source operands required by the operation specified. -; -; Ex: -; -; cp_build_inst lr2,FADD,RF7,R,S -; Builds an instruction word to -; perform the operation: -; RF7 <- R + S -; where R, S, and RF7 are single- -; precision f.p. operands. The -; instruction word is placed in lr2. -; -; cp_build_inst gr119,DMUL,GP,R,ONE_HALF -; Builds an instruction word to -; perform the operation: -; R * .5 -; where R, .5, and the result -; are double-precision f.p. operands. -; The result is not written to the -; Am29027 register file. The -; instruction word is written to -; gr119. -; -; -; cp_build_inst lr3,MIN_P_AND_T,S_D,RF7,R,S -; Builds an instruction word to -; perform the operation: -; RF7 <- smaller of(R,S) -; where R and S are double-precision -; f.p. operands, and RF7 is a single- -; precison f.p. operand. The -; instruction word is written to -; lr3. -; -; -; cp_build_inst gr97,I_P_TIMES_Q,S_S,GP,R,2 -; Builds an instruction word to -; perform the operation: -; R * 2 -; where R, .5, and the result -; are single-precision integer operands. -; The result is not written to the -; Am29027 register file. The -; instruction word is written to -; gr97 -; -; -; cp_build_inst lr7,ABS_P,D_D,RF6,S -; Builds an instruction word to -; perform the operation: -; RF6 <- |S| -; where S and RF7 are double-precision -; f.p. operands. The instruction -; word is written to gr7. -; -; -; cp_build_inst gr127,PQ_PLUS_T,D_D,RF6,R,S,RF6 -; Builds an instruction word to -; perform the operation: -; RF6 <- (R * S) + RF6 -; where R, S and the result are -; double-precision f.p. operands. -; The instruction word is written -; to gr127. -; -; -; -;============================================================================ -; - .macro cp_build_inst,p1,p2,p3,p4,p5,p6,p7 -; - .if $narg<=3 - .err - .print "cp_build_inst: missing parameter(s)" - .exitm - .endif -; -; classify operation type -; - .set _cp_op_type,255 - - _cp_set_op_params p2,FADD,1,5,4,0,5 - _cp_set_op_params p2,DADD,1,5,4,0,5 - _cp_set_op_params p2,FSUB,1,5,4,0,5 - _cp_set_op_params p2,DSUB,1,5,4,0,5 - _cp_set_op_params p2,FMUL,1,5,4,5,0 - _cp_set_op_params p2,DMUL,1,5,4,5,0 - _cp_set_op_params p2,FEQ,1,5,4,0,5 - _cp_set_op_params p2,DEQ,1,5,4,0,5 - _cp_set_op_params p2,FGE,1,5,4,0,5 - _cp_set_op_params p2,DGE,1,5,4,0,5 - _cp_set_op_params p2,FGT,1,5,4,0,5 - _cp_set_op_params p2,DGT,1,5,4,0,5 - _cp_set_op_params p2,CONVERT_I_TO_F,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_I_TO_D,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_F_TO_I,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_D_TO_I,1,4,0,0,4 -; -; The next two lines were corrected on 1-4-89, Rich Parker -; - _cp_set_op_params p2,CONVERT_F_TO_D,1,4,4,0,0 - _cp_set_op_params p2,CONVERT_D_TO_F,1,4,4,0,0 -; - _cp_set_op_params p2,PASS_P,0,5,5,0,0 - _cp_set_op_params p2,MINUSP,0,5,5,0,0 - _cp_set_op_params p2,ABSP,0,5,5,0,0 - _cp_set_op_params p2,SIGNT_TIMES_ABSP,0,6,6,0,5 - _cp_set_op_params p2,P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,MINUSP_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,MINUSP_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABS_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABS_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABSP_PLUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,ABSP_MINUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,ABS_ABSP_MINUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,MINUSP_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,ABS_P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,COMPARE_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MAX_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MAX_ABSP_AND_ABST,0,6,5,0,6 - _cp_set_op_params p2,MIN_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MIN_ABSP_AND_ABST,0,6,5,0,6 - _cp_set_op_params p2,LIMIT_P_TO_MAGT,0,6,5,0,6 - _cp_set_op_params p2,CONVERT_T_TO_INT,0,5,0,0,5 - _cp_set_op_params p2,SCALE_T_TO_INT_BY_Q,0,6,0,6,5 - _cp_set_op_params p2,PQ_PLUS_T,0,7,5,6,7 - _cp_set_op_params p2,MINUSPQ_PLUS_T,0,7,5,6,7 - _cp_set_op_params p2,PQ_MINUS_T,0,7,5,6,7 - _cp_set_op_params p2,MINUSPQ_MINUS_T,0,7,5,6,7 - _cp_set_op_params p2,ABSPQ_PLUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,MINUSABSPQ_PLUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,ABSPQ_MINUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,ROUND_T_TO_INT,0,5,0,0,5 - _cp_set_op_params p2,RECIPROCAL_OF_P,0,5,5,0,0 - _cp_set_op_params p2,CONVERT_T_TO_ALT,0,5,0,0,5 - _cp_set_op_params p2,CONVERT_T_FROM_ALT,0,5,0,0,5 - _cp_set_op_params p2,I_PASS_P,0,5,5,0,0 - _cp_set_op_params p2,I_MINUSP,0,5,5,0,0 - _cp_set_op_params p2,I_ABSP,0,5,5,0,0 - _cp_set_op_params p2,I_SIGNT_TIMES_ABSP,0,6,6,0,5 - _cp_set_op_params p2,I_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_MINUSP_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_ABS_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_ABS_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,I_COMPARE_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_MAX_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_MIN_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_CONVERT_T_TO_FLOAT,0,5,0,0,5 - _cp_set_op_params p2,I_SCALE_T_TO_FLOAT_BY_Q,0,6,0,6,5 - _cp_set_op_params p2,I_P_OR_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_XOR_T,0,6,5,0,6 - _cp_set_op_params p2,I_NOT_T,0,5,0,0,5 - _cp_set_op_params p2,I_LSHIFT_P_BY_Q,0,6,5,6,0 - _cp_set_op_params p2,I_ASHIFT_P_BY_Q,0,6,5,6,0 - _cp_set_op_params p2,I_FSHIFT_PT_BY_Q,0,7,5,7,6 - _cp_set_op_params p2,MOVE_P,0,5,5,0,0 -; -; -; if we couldn't find the op_code, flag an error -; - .if _cp_op_type>=2 - .err - .print "cp_build_inst: invalid Am29027 instruction mnemonic" - .exitm - .endif -; -; if number of parameters is incorrect, flag error -; - .if $narg!=_cp_no_params - .err - .print "cp_build_inst: incorrect number of parameters" - .exitm - .endif -; -; find correct value for precision field, if appropriate -; - .set _cp_prec_field,0 ; ** CORRECTION (1/4/89 ROP) - .if _cp_op_type==0 ; need to look for precision - .set _cp_found_precision,0 - .ifeqs "@p3@","D_D" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","D_S" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","S_D" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","S_S" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .if _cp_found_precision==0 - .err - .print "cp_build_inst: missing precision field" - .exitm - .endif - .endif -; -; find value for destination field -; - .if _cp_op_type==0 - .set _cp_dest_field_val,CP_DEST_EQ_@p4 - .else - .set _cp_dest_field_val,CP_DEST_EQ_@p3 - .endif -; -; find correct value for p select field -; - .if _cp_p_paramno==0 - .set _cp_p_field_val,0x00000000 - .endif - .if _cp_p_paramno==4 - .set _cp_p_field_val,CP_P_EQ_@p4 - .endif - .if _cp_p_paramno==5 - .set _cp_p_field_val,CP_P_EQ_@p5 - .endif - .if _cp_p_paramno==6 - .set _cp_p_field_val,CP_P_EQ_@p6 - .endif - .if _cp_p_paramno==7 - .set _cp_p_field_val,CP_P_EQ_@p7 - .endif - .ifeqs "@p2@","I_NOT_T" - .set _cp_p_field_val,CP_P_EQ_IMINUS1 - .endif -; -; find correct value for q select field -; - .if _cp_q_paramno==0 - .set _cp_q_field_val,0x00000000 - .endif - .if _cp_q_paramno==4 - .set _cp_q_field_val,CP_Q_EQ_@p4 - .endif - .if _cp_q_paramno==5 - .set _cp_q_field_val,CP_Q_EQ_@p5 - .endif - .if _cp_q_paramno==6 - .set _cp_q_field_val,CP_Q_EQ_@p6 - .endif - .if _cp_q_paramno==7 - .set _cp_q_field_val,CP_Q_EQ_@p7 - .endif -; -; find correct value for t select field -; - .if _cp_t_paramno==0 - .set _cp_t_field_val,0x00000000 - .endif - .if _cp_t_paramno==4 - .set _cp_t_field_val,CP_T_EQ_@p4 - .endif - .if _cp_t_paramno==5 - .set _cp_t_field_val,CP_T_EQ_@p5 - .endif - .if _cp_t_paramno==6 - .set _cp_t_field_val,CP_T_EQ_@p6 - .endif - .if _cp_t_paramno==7 - .set _cp_t_field_val,CP_T_EQ_@p7 - .endif -; -; - .set _cp_inst_word,CP_@p2@|_cp_prec_field|_cp_dest_field_val - .set _cp_inst_word,_cp_inst_word|_cp_p_field_val - .set _cp_inst_word,_cp_inst_word|_cp_q_field_val - .set _cp_inst_word,_cp_inst_word|_cp_t_field_val - - const p1,_cp_inst_word - consth p1,_cp_inst_word -; - .endm -; -; -; - .macro _cp_set_op_params,par1,par2,par3,par4,par5,par6,par7 - .ifeqs "@par1@","@par2@" - .set _cp_op_type,par3 - .set _cp_no_params,par4 - .set _cp_p_paramno,par5 - .set _cp_q_paramno,par6 - .set _cp_t_paramno,par7 - .endif - .endm -; -; -; -;============================================================================ -; MACRO NAME: cp_build_inst_h -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 24, 1988 -; : January 4, 1989 Rich Parker -; -; FUNCTION: Builds a 16 MSBs of a 32-bit Am29027 instruction in an -; Am29000 g.p. register. -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the instruction word -; is to be written -; -; op_code - mnemonic specifying the operation to be performed -; (e.g. FADD, P_TIMES_Q) -; -; precision - precision specification for destination, source operands: -; D_S - double-prec. result, single-prec. input(s) -; D_D - double-prec. result, double-prec. input(s) -; S_S - single-prec. result, single-prec. input(s) -; S_D - single-prec. result, double-prec. input(s) -; -; dest - destination for the operation result: -; RF0 - store result in Am29027 register file location RF0 -; RF1 - store result in Am29027 register file location RF1 -; RF2 - store result in Am29027 register file location RF2 -; RF3 - store result in Am29027 register file location RF3 -; RF4 - store result in Am29027 register file location RF4 -; RF5 - store result in Am29027 register file location RF5 -; RF6 - store result in Am29027 register file location RF6 -; RF7 - store result in Am29027 register file location RF7 -; GP - result is to be stored in an Am29000 g.p. register -; with a read_dp, read_sp, or read_int macro. -; -; source1, -; source2, -; source3 - source operand specifications: -; R - take source from Am29027 register R -; S - take source from Am29027 register S -; RF0 - take source from Am29027 register file location RF0 -; RF1 - take source from Am29027 register file location RF1 -; RF2 - take source from Am29027 register file location RF2 -; RF3 - take source from Am29027 register file location RF3 -; RF4 - take source from Am29027 register file location RF4 -; RF5 - take source from Am29027 register file location RF5 -; RF6 - take source from Am29027 register file location RF6 -; RF7 - take source from Am29027 register file location RF7 -; 0 - source is 0 -; ONE_HALF - source is constant .5 (f.p. operations only) -; IMINUS1 - source is constant -1 (integer operations only) -; 1 - source is constant 1 -; 2 - source is constant 2 -; 3 - source is constant 3 -; PI - source is constant pi (f.p. operations only) -; IMINUSMAX - source is -(2**63) (integer operations only) -; -; -; USAGE: -; -; cp_build_inst_h reg,op_code,[precision,]dest,source1[,source2][,source3] -; -; This macro is similar to cp_build_inst, but creates only the 16 MSBs -; of the 32-bit Am29027 instruction word. This macro is useful in cases -; where the 16 LSBs of instruction word, which specify the operation -; to be performed, already exist in an Am29000 g.p. register, but where -; the 16 MSBs, which specify operand sources and destination, must be -; changed. In such cases, one Am29000 instruction can be saved by using -; cp_build_inst_h instead of cp_build_inst. -; -; Syntax and usage are identical to that of cp_build_inst. -; -; NOTE: This macro references macro _cp_set_op_params, which appears -; in the assembly listing for macro _cp_build_inst. -; -; -; -; -;============================================================================ -; - .macro cp_build_inst_h,p1,p2,p3,p4,p5,p6,p7 -; - .if $narg<=3 - .err - .print "cp_build_inst_h: missing parameter(s)" - .exitm - .endif -; -; classify operation type -; - .set _cp_op_type,255 - - _cp_set_op_params p2,FADD,1,5,4,0,5 - _cp_set_op_params p2,DADD,1,5,4,0,5 - _cp_set_op_params p2,FSUB,1,5,4,0,5 - _cp_set_op_params p2,DSUB,1,5,4,0,5 - _cp_set_op_params p2,FMUL,1,5,4,5,0 - _cp_set_op_params p2,DMUL,1,5,4,5,0 - _cp_set_op_params p2,FEQ,1,5,4,0,5 - _cp_set_op_params p2,DEQ,1,5,4,0,5 - _cp_set_op_params p2,FGE,1,5,4,0,5 - _cp_set_op_params p2,DGE,1,5,4,0,5 - _cp_set_op_params p2,FGT,1,5,4,0,5 - _cp_set_op_params p2,DGT,1,5,4,0,5 - _cp_set_op_params p2,CONVERT_I_TO_F,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_I_TO_D,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_F_TO_I,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_D_TO_I,1,4,0,0,4 -; -; The next two lines were corrected on 1-4-89, Rich Parker -; - _cp_set_op_params p2,CONVERT_F_TO_D,1,4,4,0,0 - _cp_set_op_params p2,CONVERT_D_TO_F,1,4,4,0,0 -; - _cp_set_op_params p2,PASS_P,0,5,5,0,0 - _cp_set_op_params p2,MINUSP,0,5,5,0,0 - _cp_set_op_params p2,ABSP,0,5,5,0,0 - _cp_set_op_params p2,SIGNT_TIMES_ABSP,0,6,6,0,5 - _cp_set_op_params p2,P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,MINUSP_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,MINUSP_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABS_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABS_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABSP_PLUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,ABSP_MINUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,ABS_ABSP_MINUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,MINUSP_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,ABS_P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,COMPARE_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MAX_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MAX_ABSP_AND_ABST,0,6,5,0,6 - _cp_set_op_params p2,MIN_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MIN_ABSP_AND_ABST,0,6,5,0,6 - _cp_set_op_params p2,LIMIT_P_TO_MAGT,0,6,5,0,6 - _cp_set_op_params p2,CONVERT_T_TO_INT,0,5,0,0,5 - _cp_set_op_params p2,SCALE_T_TO_INT_BY_Q,0,6,0,6,5 - _cp_set_op_params p2,PQ_PLUS_T,0,7,5,6,7 - _cp_set_op_params p2,MINUSPQ_PLUS_T,0,7,5,6,7 - _cp_set_op_params p2,PQ_MINUS_T,0,7,5,6,7 - _cp_set_op_params p2,MINUSPQ_MINUS_T,0,7,5,6,7 - _cp_set_op_params p2,ABSPQ_PLUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,MINUSABSPQ_PLUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,ABSPQ_MINUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,ROUND_T_TO_INT,0,5,0,0,5 - _cp_set_op_params p2,RECIPROCAL_OF_P,0,5,5,0,0 - _cp_set_op_params p2,CONVERT_T_TO_ALT,0,5,0,0,5 - _cp_set_op_params p2,CONVERT_T_FROM_ALT,0,5,0,0,5 - _cp_set_op_params p2,I_PASS_P,0,5,5,0,0 - _cp_set_op_params p2,I_MINUSP,0,5,5,0,0 - _cp_set_op_params p2,I_ABSP,0,5,5,0,0 - _cp_set_op_params p2,I_SIGNT_TIMES_ABSP,0,6,6,0,5 - _cp_set_op_params p2,I_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_MINUSP_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_ABS_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_ABS_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,I_COMPARE_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_MAX_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_MIN_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_CONVERT_T_TO_FLOAT,0,5,0,0,5 - _cp_set_op_params p2,I_SCALE_T_TO_FLOAT_BY_Q,0,6,0,6,5 - _cp_set_op_params p2,I_P_OR_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_XOR_T,0,6,5,0,6 - _cp_set_op_params p2,I_NOT_T,0,5,0,0,5 - _cp_set_op_params p2,I_LSHIFT_P_BY_Q,0,6,5,6,0 - _cp_set_op_params p2,I_ASHIFT_P_BY_Q,0,6,5,6,0 - _cp_set_op_params p2,I_FSHIFT_PT_BY_Q,0,7,5,7,6 - _cp_set_op_params p2,MOVE_P,0,5,5,0,0 -; -; -; if we couldn't find the op_code, flag an error -; - .if _cp_op_type>=2 - .err - .print "cp_build_inst_h: invalid Am29027 instruction mnemonic" - .exitm - .endif -; -; if number of parameters is incorrect, flag error -; - .if $narg!=_cp_no_params - .err - .print "cp_build_inst_h: incorrect number of parameters" - .exitm - .endif -; -; find correct value for precision field, if appropriate -; - .set _cp_prec_field,0 ; ** CORRECTION (1-4-89 Rich Parker) - .if _cp_op_type==0 ; need to look for precision - .set _cp_found_precision,0 - .ifeqs "@p3@","D_D" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","D_S" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","S_D" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","S_S" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .if _cp_found_precision==0 - .err - .print "cp_build_inst_h: missing precision field" - .exitm - .endif - .endif -; -; find value for destination field -; - .if _cp_op_type==0 - .set _cp_dest_field_val,CP_DEST_EQ_@p4 - .else - .set _cp_dest_field_val,CP_DEST_EQ_@p3 - .endif -; -; find correct value for p select field -; - .if _cp_p_paramno==0 - .set _cp_p_field_val,0x00000000 - .endif - .if _cp_p_paramno==4 - .set _cp_p_field_val,CP_P_EQ_@p4 - .endif - .if _cp_p_paramno==5 - .set _cp_p_field_val,CP_P_EQ_@p5 - .endif - .if _cp_p_paramno==6 - .set _cp_p_field_val,CP_P_EQ_@p6 - .endif - .if _cp_p_paramno==7 - .set _cp_p_field_val,CP_P_EQ_@p7 - .endif - .ifeqs "@p2@","I_NOT_T" - .set _cp_p_field_val,CP_P_EQ_IMINUS1 - .endif -; -; find correct value for q select field -; - .if _cp_q_paramno==0 - .set _cp_q_field_val,0x00000000 - .endif - .if _cp_q_paramno==4 - .set _cp_q_field_val,CP_Q_EQ_@p4 - .endif - .if _cp_q_paramno==5 - .set _cp_q_field_val,CP_Q_EQ_@p5 - .endif - .if _cp_q_paramno==6 - .set _cp_q_field_val,CP_Q_EQ_@p6 - .endif - .if _cp_q_paramno==7 - .set _cp_q_field_val,CP_Q_EQ_@p7 - .endif -; -; find correct value for t select field -; - .if _cp_t_paramno==0 - .set _cp_t_field_val,0x00000000 - .endif - .if _cp_t_paramno==4 - .set _cp_t_field_val,CP_T_EQ_@p4 - .endif - .if _cp_t_paramno==5 - .set _cp_t_field_val,CP_T_EQ_@p5 - .endif - .if _cp_t_paramno==6 - .set _cp_t_field_val,CP_T_EQ_@p6 - .endif - .if _cp_t_paramno==7 - .set _cp_t_field_val,CP_T_EQ_@p7 - .endif -; -; - .set _cp_inst_word,CP_@p2@|_cp_prec_field|_cp_dest_field_val - .set _cp_inst_word,_cp_inst_word|_cp_p_field_val - .set _cp_inst_word,_cp_inst_word|_cp_q_field_val - .set _cp_inst_word,_cp_inst_word|_cp_t_field_val -; - consth p1,_cp_inst_word -; - .endm -; -; -; -; -;============================================================================ -; MACRO NAME: cp_build_inst_l -; -; WRITTEN BY: Bob Perlman -; -; MOST RECENT UPDATE: April 24, 1988 -; : January 4, 1989 Rich Parker -; -; FUNCTION: Builds a 16 LSBs of a 32-bit Am29027 instruction in an -; Am29000 g.p. register; the 16 MSBs of the register are -; set to 0.. -; -; PARAMETERS: -; reg - the Am29000 g.p. register into which the instruction word -; is to be written -; -; op_code - mnemonic specifying the operation to be performed -; (e.g. FADD, P_TIMES_Q) -; -; precision - precision specification for destination, source operands: -; D_S - double-prec. result, single-prec. input(s) -; D_D - double-prec. result, double-prec. input(s) -; S_S - single-prec. result, single-prec. input(s) -; S_D - single-prec. result, double-prec. input(s) -; -; dest - destination for the operation result: -; RF0 - store result in Am29027 register file location RF0 -; RF1 - store result in Am29027 register file location RF1 -; RF2 - store result in Am29027 register file location RF2 -; RF3 - store result in Am29027 register file location RF3 -; RF4 - store result in Am29027 register file location RF4 -; RF5 - store result in Am29027 register file location RF5 -; RF6 - store result in Am29027 register file location RF6 -; RF7 - store result in Am29027 register file location RF7 -; GP - result is to be stored in an Am29000 g.p. register -; with a read_dp, read_sp, or read_int macro. -; -; source1, -; source2, -; source3 - source operand specifications: -; R - take source from Am29027 register R -; S - take source from Am29027 register S -; RF0 - take source from Am29027 register file location RF0 -; RF1 - take source from Am29027 register file location RF1 -; RF2 - take source from Am29027 register file location RF2 -; RF3 - take source from Am29027 register file location RF3 -; RF4 - take source from Am29027 register file location RF4 -; RF5 - take source from Am29027 register file location RF5 -; RF6 - take source from Am29027 register file location RF6 -; RF7 - take source from Am29027 register file location RF7 -; 0 - source is 0 -; ONE_HALF - source is constant .5 (f.p. operations only) -; IMINUS1 - source is constant -1 (integer operations only) -; 1 - source is constant 1 -; 2 - source is constant 2 -; 3 - source is constant 3 -; PI - source is constant pi (f.p. operations only) -; IMINUSMAX - source is -(2**63) (integer operations only) -; -; -; USAGE: -; -; cp_build_inst_l reg,op_code,[precision,]dest,source1[,source2][,source3] -; -; This macro is similar to cp_build_inst, but creates only the 16 LSBs -; of the 32-bit Am29027 instruction word; the 16 MSBs of the target -; register are set to 0. This macro is useful in cases -; where it is helpful to specify instruction LSBs and MSBs separately, -; to improve instruction scheduling. -; -; Syntax and usage are identical to that of cp_build_inst. -; -; NOTE: This macro references macro _cp_set_op_params, which appears -; in the assembly listing for macro _cp_build_inst. -; -; -;============================================================================ -; - .macro cp_build_inst_l,p1,p2,p3,p4,p5,p6,p7 -; - .if $narg<=3 - .err - .print "cp_build_inst_h: missing parameter(s)" - .exitm - .endif -; -; classify operation type -; - .set _cp_op_type,255 - - _cp_set_op_params p2,FADD,1,5,4,0,5 - _cp_set_op_params p2,DADD,1,5,4,0,5 - _cp_set_op_params p2,FSUB,1,5,4,0,5 - _cp_set_op_params p2,DSUB,1,5,4,0,5 - _cp_set_op_params p2,FMUL,1,5,4,5,0 - _cp_set_op_params p2,DMUL,1,5,4,5,0 - _cp_set_op_params p2,FEQ,1,5,4,0,5 - _cp_set_op_params p2,DEQ,1,5,4,0,5 - _cp_set_op_params p2,FGE,1,5,4,0,5 - _cp_set_op_params p2,DGE,1,5,4,0,5 - _cp_set_op_params p2,FGT,1,5,4,0,5 - _cp_set_op_params p2,DGT,1,5,4,0,5 - _cp_set_op_params p2,CONVERT_I_TO_F,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_I_TO_D,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_F_TO_I,1,4,0,0,4 - _cp_set_op_params p2,CONVERT_D_TO_I,1,4,0,0,4 -; -; The next two lines were corrected on 1-4-89, Rich Parker -; - _cp_set_op_params p2,CONVERT_F_TO_D,1,4,4,0,0 - _cp_set_op_params p2,CONVERT_D_TO_F,1,4,4,0,0 -; - _cp_set_op_params p2,PASS_P,0,5,5,0,0 - _cp_set_op_params p2,MINUSP,0,5,5,0,0 - _cp_set_op_params p2,ABSP,0,5,5,0,0 - _cp_set_op_params p2,SIGNT_TIMES_ABSP,0,6,6,0,5 - _cp_set_op_params p2,P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,MINUSP_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,MINUSP_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABS_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABS_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,ABSP_PLUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,ABSP_MINUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,ABS_ABSP_MINUS_ABST,0,6,5,0,6 - _cp_set_op_params p2,P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,MINUSP_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,ABS_P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,COMPARE_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MAX_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MAX_ABSP_AND_ABST,0,6,5,0,6 - _cp_set_op_params p2,MIN_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,MIN_ABSP_AND_ABST,0,6,5,0,6 - _cp_set_op_params p2,LIMIT_P_TO_MAGT,0,6,5,0,6 - _cp_set_op_params p2,CONVERT_T_TO_INT,0,5,0,0,5 - _cp_set_op_params p2,SCALE_T_TO_INT_BY_Q,0,6,0,6,5 - _cp_set_op_params p2,PQ_PLUS_T,0,7,5,6,7 - _cp_set_op_params p2,MINUSPQ_PLUS_T,0,7,5,6,7 - _cp_set_op_params p2,PQ_MINUS_T,0,7,5,6,7 - _cp_set_op_params p2,MINUSPQ_MINUS_T,0,7,5,6,7 - _cp_set_op_params p2,ABSPQ_PLUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,MINUSABSPQ_PLUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,ABSPQ_MINUS_ABST,0,7,5,6,7 - _cp_set_op_params p2,ROUND_T_TO_INT,0,5,0,0,5 - _cp_set_op_params p2,RECIPROCAL_OF_P,0,5,5,0,0 - _cp_set_op_params p2,CONVERT_T_TO_ALT,0,5,0,0,5 - _cp_set_op_params p2,CONVERT_T_FROM_ALT,0,5,0,0,5 - _cp_set_op_params p2,I_PASS_P,0,5,5,0,0 - _cp_set_op_params p2,I_MINUSP,0,5,5,0,0 - _cp_set_op_params p2,I_ABSP,0,5,5,0,0 - _cp_set_op_params p2,I_SIGNT_TIMES_ABSP,0,6,6,0,5 - _cp_set_op_params p2,I_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_MINUSP_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_ABS_P_PLUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_ABS_P_MINUS_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_TIMES_Q,0,6,5,6,0 - _cp_set_op_params p2,I_COMPARE_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_MAX_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_MIN_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_CONVERT_T_TO_FLOAT,0,5,0,0,5 - _cp_set_op_params p2,I_SCALE_T_TO_FLOAT_BY_Q,0,6,0,6,5 - _cp_set_op_params p2,I_P_OR_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_AND_T,0,6,5,0,6 - _cp_set_op_params p2,I_P_XOR_T,0,6,5,0,6 - _cp_set_op_params p2,I_NOT_T,0,5,0,0,5 - _cp_set_op_params p2,I_LSHIFT_P_BY_Q,0,6,5,6,0 - _cp_set_op_params p2,I_ASHIFT_P_BY_Q,0,6,5,6,0 - _cp_set_op_params p2,I_FSHIFT_PT_BY_Q,0,7,5,7,6 - _cp_set_op_params p2,MOVE_P,0,5,5,0,0 -; -; -; if we couldn't find the op_code, flag an error -; - .if _cp_op_type>=2 - .err - .print "cp_build_inst_h: invalid Am29027 instruction mnemonic" - .exitm - .endif -; -; if number of parameters is incorrect, flag error -; - .if $narg!=_cp_no_params - .err - .print "cp_build_inst_h: incorrect number of parameters" - .exitm - .endif -; -; find correct value for precision field, if appropriate -; - .set _cp_prec_field,0 ; CORRECTION (1-4-89 Rich Parker) - .if _cp_op_type==0 ; need to look for precision - .set _cp_found_precision,0 - .ifeqs "@p3@","D_D" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","D_S" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","S_D" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .ifeqs "@p3@","S_S" - .set _cp_prec_field,CP_@p3 - .set _cp_found_precision,1 - .endif - .if _cp_found_precision==0 - .err - .print "cp_build_inst_h: missing precision field" - .exitm - .endif - .endif -; -; find value for destination field -; - .if _cp_op_type==0 - .set _cp_dest_field_val,CP_DEST_EQ_@p4 - .else - .set _cp_dest_field_val,CP_DEST_EQ_@p3 - .endif -; -; find correct value for p select field -; - .if _cp_p_paramno==0 - .set _cp_p_field_val,0x00000000 - .endif - .if _cp_p_paramno==4 - .set _cp_p_field_val,CP_P_EQ_@p4 - .endif - .if _cp_p_paramno==5 - .set _cp_p_field_val,CP_P_EQ_@p5 - .endif - .if _cp_p_paramno==6 - .set _cp_p_field_val,CP_P_EQ_@p6 - .endif - .if _cp_p_paramno==7 - .set _cp_p_field_val,CP_P_EQ_@p7 - .endif - .ifeqs "@p2@","I_NOT_T" - .set _cp_p_field_val,CP_P_EQ_IMINUS1 - .endif -; -; find correct value for q select field -; - .if _cp_q_paramno==0 - .set _cp_q_field_val,0x00000000 - .endif - .if _cp_q_paramno==4 - .set _cp_q_field_val,CP_Q_EQ_@p4 - .endif - .if _cp_q_paramno==5 - .set _cp_q_field_val,CP_Q_EQ_@p5 - .endif - .if _cp_q_paramno==6 - .set _cp_q_field_val,CP_Q_EQ_@p6 - .endif - .if _cp_q_paramno==7 - .set _cp_q_field_val,CP_Q_EQ_@p7 - .endif -; -; find correct value for t select field -; - .if _cp_t_paramno==0 - .set _cp_t_field_val,0x00000000 - .endif - .if _cp_t_paramno==4 - .set _cp_t_field_val,CP_T_EQ_@p4 - .endif - .if _cp_t_paramno==5 - .set _cp_t_field_val,CP_T_EQ_@p5 - .endif - .if _cp_t_paramno==6 - .set _cp_t_field_val,CP_T_EQ_@p6 - .endif - .if _cp_t_paramno==7 - .set _cp_t_field_val,CP_T_EQ_@p7 - .endif -; -; - .set _cp_inst_word,CP_@p2@|_cp_prec_field|_cp_dest_field_val - .set _cp_inst_word,_cp_inst_word|_cp_p_field_val - .set _cp_inst_word,_cp_inst_word|_cp_q_field_val - .set _cp_inst_word,_cp_inst_word|_cp_t_field_val -; - const p1,_cp_inst_word -; - .endm -; -; end of file fpsymbol.h diff --git a/newlib/libc/sys/a29khif/sys/intrinsi.h b/newlib/libc/sys/a29khif/sys/intrinsi.h deleted file mode 100644 index 1ae3a8b5c..000000000 --- a/newlib/libc/sys/a29khif/sys/intrinsi.h +++ /dev/null @@ -1,457 +0,0 @@ -; @(#)intrinsi.h 1.4 90/10/14 20:56:06, Copyright 1988, 1989, 1990 AMD -; start of file intrinsi.h -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; - .title "QTC Intrinsics Header file" -; -; Floating point library package for AMD 29000 family -; -; Copyright 1988 Advanced Micro Devices, Inc. -; -; All rights reserved -; -; Developed for AMD by Quantitative Technology Corporation -; 8700 SW Creekside Place Suite D -; Beaverton OR 97005 -; (503) 626-3081 -; -; Version information : -; -; Revision 1.6 89/06/29 16:08:51 jimh -; Fixed two bugs regarding compatiblility with the fpsymbol file. The -; definitions of ROUND_TO_PLUS/MINUS_INFINITY were reversed. Set_Rounding -; _Mode was fixed to set the local copy (29000 resident) of rounding mode -; in 29027 mode. -; -; -; Revision 1.5 89/04/17 11:20:49 jim -; replaced emfsr and emtsr macro calls with mfsr and mtsr instructions. -; -; Revision 1.4 89/02/24 15:18:04 jimh -; Added the definitions of FP_ENV_MODE_1_DEFAULT, FP_ENV_MODE_2_DEFAULT, -; FP_FLAGS_DEFAULT. -; Added macro clear_Flags. -; Changed the operation of set_Invalid_Op_flag, set_Reserved_Op_flag. -; -; Revision 1.3 89/02/01 18:30:12 jimh -; Changed the way set_Rounding_Mode, extract_Rounding_Mode, set_Invalid_Op_flag -; and set_Reserved_Op_flag are done. Changed save_FP_regs. -; -; Revision 1.2 89/01/31 10:01:54 jimh -; Updated to the new standard. This includes moving in register -; definitions, changing old symbols to reflect those in fpsymbol.h, -; and changing the include file to smartmac.h. -; -; - .include "../traps/fpenv.h" ; RPD 8/21/89 - .include "sys/smartmac.h" - - .equ DOUBLE_EXP_WIDTH, 11 - .equ DOUBLE_EXTENDED_WIDTH, 56 - - .equ SIGNED, 0 - .equ UNSIGNED, 1 - - .equ ROUND_TO_NEAREST, 0 - .equ ROUND_TO_MINUS_INFINITY, 1 - .equ ROUND_TO_PLUS_INFINITY, 2 - .equ ROUND_TO_ZERO, 3 - .equ ROUNDING_MODE_POSITION, 14 - - .equ FORMAT_INTEGER, 0 - .equ FORMAT_SINGLE, 1 - .equ FORMAT_DOUBLE, 2 - - .equ DOUBLE_MSB_MASK,0x00080000 -; -; The following are definitions used in the smart macro package, defining -; the 29000 shadow registers for the floating-point register file, and -; some temporary registers used during the library routines -; - .reg FP0, gr96 - .reg FP1, gr98 - .reg FP2, gr100 - .reg FP3, gr102 - .reg FP4, gr104 - .reg FP5, gr106 - .reg FP6, gr108 - .reg FP7, gr110 -; -; GR60 through GR6F are used to return the value of a function -; - .reg rtn0, gr96 - .reg rtn1, gr97 - .reg rtn2, gr98 - .reg rtn3, gr99 - .reg rtn4, gr100 - .reg rtn5, gr101 - .reg rtn6, gr102 - .reg rtn7, gr103 - .reg rtn8, gr104 - .reg rtn9, gr105 - .reg rtn10, gr106 - .reg rtn11, gr107 - .reg rtn12, gr108 - .reg rtn13, gr109 - .reg rtn14, gr110 - .reg rtn15, gr111 -; -; GR74..GR78 (116-120) - temporaries -; - .reg t0, gr116 - .reg t1, gr117 - .reg t2, gr118 - .reg t3, gr119 - .reg t4, gr120 -; -; FP_ENV_MODE_1 and FP_ENV_MODE_2 are based on 64-bit 29027 Mode register, -; and thus the fpsymbol.h CP_ constants may be used directly. -; -; FP_ENV_MODE_1 (Bits 0-31) -; -; 0-3 - floating-point format select, always 0 -; 4 - Saturate enable -; 5 - IEEE Affine/Projective mode (ignored by traps code) -; 6 - IEEE Trap enable -; 7 - IEEE Sudden underflow / FP Environment Fast Float Select -; 8-10 - ignored -; 11 - Integer multiplication signed/unsigned select -; 12-13 - Integer multiplication format adjust -; 14-16 - Rounding mode select -; 17-19 - ignored -; 20 - Pipeline mode select -; 21 - ignored -; 22 - Invalid operation mask bit -; 23 - Reserved operand mask bit -; 24 - Overflow mask bit -; 25 - Underflow mask bit -; 26 - Inexact result mask bit -; 27 - Zero mask bit -; 28-31 - ignored -; -; FP_ENV_MODE_2 (Bits 32-63) [Hardware configuration register, rarely modified] -; -; 32-35 - Pipeline timer count -; 36-39 - Timer count for multiply-accumulate operation -; 40-43 - Timer count for save state transaction request -; 44-63 - ignored -; -; FP_ENV_MODE_1 definitions -; - .set FP_ENV_MODE_1_DEFAULT, CP_PFF_EQ_IEEE - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_AFF_EQ_IEEE - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_AFFINE_MODE - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_IEEE_TRAPS_DISABLED - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_IEEE_GRADUAL_UFLOW_MODE - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_UNSIGNED_INT_MPY_MODE - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_MF_EQ_LSBS - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_RMS_EQ_NEAREST - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_FLOWTHROUGH_MODE - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_INVALID_OP_EXCP_MASK - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_RESERVED_OP_EXCP_MASK - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_OVERFLOW_EXCP_MASK - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_UNDERFLOW_EXCP_MASK - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_INEXACT_EXCP_MASK - .set FP_ENV_MODE_1_DEFAULT,FP_ENV_MODE_1_DEFAULT|CP_ZERO_EXCP_MASK -; -; FP_ENV_MODE_2 definitions -; - .set FP_ENV_MODE_2_DEFAULT, CP_PLTC_EQ_6 - .set FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_MATC_EQ_9 - .set FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_MVTC_EQ_3 - .set FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_NORMAL_DRDY_MODE - .set FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_HALT_ON_ERROR_DISABLED - .set FP_ENV_MODE_2_DEFAULT,FP_ENV_MODE_2_DEFAULT|CP_EXCP_DISABLED -; -; FP_FLAGS_DEFAULT definitions -; - .equ FP_FLAGS_DEFAULT, 0x00000000 ; No flags set -; -; The following macros are used by transcendentals to access the environment. -; -; MACRO NAME: clear_Flags -; -; FUNCTION: to clear the flags on entry to a transcendental routine. -; -; INPUT PARAMETERS: reg - temporary working register -; reg2 - temporary working register -; - .macro clear_Flags,reg,reg2 - .endm -; -; MACRO NAME: set_Invalid_Op_flag -; -; FUNCTION: to set the Invalid operation flag in the floating-point status -; register -; -; INPUT PARAMETERS: reg - temporary working register -; reg2 - 2nd temporary working register -; - .macro set_Invalid_Op_flag,reg,reg2 - .endm - -; -; MACRO NAME: set_Reserved_Op_flag -; -; FUNCTION: to set the Reserved Op flag in the floating-point status register -; -; INPUT PARAMETERS: reg - temporary working register -; reg2 - 2nd temporary working register -; - .macro set_Reserved_Op_flag,reg,reg2 - .endm - -; -; MACRO NAME: extract_Rounding_Mode -; -; FUNCTION: to extract the Rounding Mode portion of the floating-point -; invironment mode register, shift the value to the range of -; 0-7, and leave it in a register -; -; INPUT PARAMETERS: reg - destination for the mode -; - .macro extract_Rounding_Mode,reg - .ifdef _29027_MODE - .extern __29027Mode - const reg,__29027Mode - consth reg,__29027Mode - load 0,0,reg,reg - srl reg,reg,CP_RMS_POSITION - and reg,reg,CP_RMS_MASK >> CP_RMS_POSITION - .else - mfsr reg,FPE - and reg,reg,FPE_FPRND_MASK - srl reg,reg,FPE_FPRND_POSITION - .endif - .endm - -; -; MACRO NAME: set_Rounding_Mode -; -; FUNCTION: to set the 29027 Rounding Mode to a given value -; -; INPUT PARAMETERS: reg - working register -; reg2 - second working register -; rounding_mode - value of the rounding mode -; 0 - round to nearest -; 1 - round to minus infinity -; 2 - round to plus infinity -; 3 - round to zero -; -; NOTES: rounding_mode value is not checked -; 29027 Mode register is NOT written by this macro -; - .macro set_Rounding_Mode,reg,reg2,mode - .ifdef _29027_MODE - .extern __29027Mode - const reg2,__29027Mode - consth reg2,__29027Mode - load 0,0,reg,reg2 - const reg2,CP_RMS_MASK - consth reg2,CP_RMS_MASK - andn reg,reg,reg2 - const reg2,mode - sll reg2,reg2,CP_RMS_POSITION - or reg,reg,reg2 - const reg2,__29027Mode - consth reg2,__29027Mode - store 0,0,reg,reg2 - add reg2,reg2,4 - load 0,0,reg2,reg2 - cp_write_mode reg2,reg - .else - mfsr reg,FPE - andn reg,reg,FPE_FPRND_MASK - const reg2,mode - sll reg2,reg2,FPE_FPRND_POSITION - or reg,reg,reg2 - mtsr FPE,reg - .endif - .endm -; -; -; NOTE: The 29027 is the floating point coprocessor for the 29000. -; It contains 8 floating point registers FP0 to FP7. Three of -; these, FP0, FP1, and FP2, are currently designated as scratch, -; that is, they will not be preserved across calls. The other -; five contain values that must be saved whenever they are used -; in code, and restored before the exit of the routine. The 29027 -; registers are tagged with a single bit indicating the precision -; of the current value. When numbers are read into the 29027, -; they are always stored in double precision, so that single -; precision values are converted on input. Only the MOVE instruction -; fails to do this automatic widening. If the result from calculations -; in the 29027 ALU (determined by the result precision bit in the -; instruction word) is to be single precision and the result saved in -; an FP reg, the result precision bit from the instruction gets copied -; into the precision bit for the register. If a single precision -; SNaN is saved from the 29027, it will be converted to a double -; precision QNaN. Along the way it will cause an unmasked exception -; when read off the chip and cause changes to the status register. -; So the preservation routine will need to modify the mode register to -; mask off the exceptions, save the state of the status register before -; saving the FP regs, and restore the status and mode registers to their -; original settings when the save is complete. -; -; REFERENCE: The instructions to drive the Am29027 are described in the -; Am29027 manual beginning on page 17. Table 4 describes the -; operation codes and table 3 the multiplexer codes. Communication -; with the 29000 is described on pages 11 and 12 of the Am29027 -; manual and chapters 6 and 8 of the Am29000 User's Manual -; -; MACRO NAME: save_FP_regs -; -; FUNCTION: to save the AMD 29027 floating point register values in the -; 29000 general purpose registers -; -; INPUT PARAMETERS: fp_register, one of the 29027 registers FP3 - FP7 -; -; REGISTER USAGE: the following registers are used in save_FP_regs -; -; rtn0 this register is used in setting the mode and status registers -; rtn1 this register is used in setting the mode and status registers -; rtn6 this register is used to store the MSW when FP3 is saved -; rtn7 this register is used to store the LSW when FP3 is saved -; rtn8 this register is used to store the MSW when FP4 is saved -; rtn9 this register is used to store the LSW when FP4 is saved -; - - .macro save_FP_regs,fp_register - .ifdef _29027_MODE - ; - ; For 29027 mode, expand the macro into 29027 code to preserve FP register - ; - .ifeqs "@fp_register@","FP3" - const rtn6,__29027Mode ; Load the address of FP mode - consth rtn6,__29027Mode - load 0,0,rtn0,rtn6 ; Load MSW of FP mode into rtn0 - add rtn6,rtn6,4 ; Increment rtn6 + 4 - load 0,0,rtn1,rtn6 ; Load LSW of FP mode into rtn1 - const rtn6,CP_RESERVED_OP_EXCP_MASK ; Load mask to disable exception - consth rtn6,CP_RESERVED_OP_EXCP_MASK - or rtn0,rtn0,rtn6 ; OR in disable of exception mask - cp_write_mode rtn1, rtn0 ; Reset mode w/exception disabled - cp_read_status rtn0 ; Read status and save in rtn1 - const rtn6,CP_PASS_P | CP_P_EQ_RF3 ; Instruction is PASS_P from RF3 - consth rtn6,CP_PASS_P | CP_P_EQ_RF3 - ; Load & execute the instruction - ; - store 1,CP_WRITE_INST | CP_START,rtn6,rtn6 - load 1,CP_READ_MSBS,rtn6,rtn6 ; Read the MSW to first register - load 1,CP_READ_LSBS,rtn7,rtn7 ; Read the LSW to second register - cp_write_status rtn0 ; Restore the original status - const rtn1,__29027Mode ; Load the address of FP mode - consth rtn1,__29027Mode - load 0,0,rtn0,rtn1 ; Load MSW of FP mode into rtn0 - add rtn1,rtn1,4 ; Increment rtn6 to __29027Mode+4 - load 0,0,rtn1,rtn1 ; Load LSW of FP mode into rtn1 - cp_write_mode rtn1, rtn0 ; Restore the original write mode - .endif - .ifeqs "@fp_register@","FP4" - const rtn8,__29027Mode ; Load the address of FP mode - consth rtn8,__29027Mode - load 0,0,rtn0,rtn8 ; Load MSW of FP mode into rtn0 - add rtn8,rtn8,4 ; Increment rtn6 + 4 - load 0,0,rtn1,rtn8 ; Load LSW of FP mode into rtn1 - const rtn8,CP_RESERVED_OP_EXCP_MASK ; Load mask to disable exception - consth rtn8,CP_RESERVED_OP_EXCP_MASK - or rtn0,rtn0,rtn8 ; OR in disable of exception mask - cp_write_mode rtn1, rtn0 ; Reset mode w/exception disabled - cp_read_status rtn0 ; Read status and save in rtn1 - const rtn8,CP_PASS_P | CP_P_EQ_RF4 ; Instruction is PASS_P from RF4 - consth rtn8,CP_PASS_P | CP_P_EQ_RF4 - ; Load & execute the instruction - ; - store 1,CP_WRITE_INST | CP_START,rtn8,rtn8 - load 1,CP_READ_MSBS,rtn8,rtn8 ; Read the MSW to first register - load 1,CP_READ_LSBS,rtn9,rtn9 ; Read the LSW to second register - cp_write_status rtn0 ; Restore the original status - const rtn1,__29027Mode ; Load the address of FP mode - consth rtn1,__29027Mode - load 0,0,rtn0,rtn1 ; Load MSW of FP mode into rtn0 - add rtn1,rtn1,4 ; Increment rtn6 + 4 - load 0,0,rtn1,rtn1 ; Load LSW of FP mode into rtn1 - cp_write_mode rtn1, rtn0 ; Restore the original write mode - .endif - .else - ; - ; For 29000 mode, do nothing - ; - .endif - .endm -; -; MACRO NAME: restore_FP_regs -; -; FUNCTION: to restore the AMD 29027 floating point register values from the -; 29000 general purpose registers -; -; INPUT PARAMETERS: fp_register, one of the 29027 registers FP3 - FP7 -; -; REGISTER USAGE: the following registers are used in restore_FP_regs -; -; rtn0 this register is used in setting the mode and status registers -; rtn6 the value in this register is stored as the MSW of FP3 -; rtn7 the value in this register is stored as the LSW of FP3 -; rtn8 the value in this register is stored as the MSW of FP4 -; rtn9 the value in this register is stored as the LSW of FP4 -; - .macro restore_FP_regs,fp_register - .ifdef _29027_MODE - ; - ; For 29027 mode, move data from return registers to the correct FP register - ; - .ifeqs "@fp_register@","FP3" - store 1,CP_WRITE_R ,rtn6,rtn7 ; Move the data to the R register - ; Then create the instruction - ; - const rtn0,CP_MOVE_P|CP_D_D|CP_P_EQ_R|CP_DEST_EQ_RF3 - consth rtn0,CP_MOVE_P|CP_D_D|CP_P_EQ_R|CP_DEST_EQ_RF3 - ; - ; Perform the write - ; - store 1,(CP_WRITE_INST | CP_START),rtn0,0 - .endif - .ifeqs "@fp_register@","FP4" - store 1,CP_WRITE_R ,rtn8,rtn9 ; Move the data to the R register - ; Then create the instruction - ; - const rtn0,CP_MOVE_P|CP_D_D|CP_P_EQ_R|CP_DEST_EQ_RF4 - consth rtn0,CP_MOVE_P|CP_D_D|CP_P_EQ_R|CP_DEST_EQ_RF4 - ; - ; Perform the write - ; - store 1,(CP_WRITE_INST | CP_START),rtn0,0 - .endif - .else - ; - ; For 29000 mode, do nothing. - ; - .endif - .endm -; -; end of file intrinsi.h diff --git a/newlib/libc/sys/a29khif/sys/macros.h b/newlib/libc/sys/a29khif/sys/macros.h deleted file mode 100644 index 3c832f033..000000000 --- a/newlib/libc/sys/a29khif/sys/macros.h +++ /dev/null @@ -1,37 +0,0 @@ -; @(#)macros.h 1.3 90/10/14 20:56:10, Copyright 1989, 1990 AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; macros.h -; Short macros of general utility - - .macro mov, dest,src - add dest, src, 0 - .endm - - .macro not, dest,src - nand dest, src, src - .endm diff --git a/newlib/libc/sys/a29khif/sys/proreg.h b/newlib/libc/sys/a29khif/sys/proreg.h deleted file mode 100644 index ca16b708c..000000000 --- a/newlib/libc/sys/a29khif/sys/proreg.h +++ /dev/null @@ -1,60 +0,0 @@ -; @(#)proreg.h 1.3 90/10/14 20:56:11, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; proreg.h -; - ; 16 function value return regs - .reg v0, gr96 - .reg v1, gr97 - .reg v2, gr98 - .reg v3, gr99 - .reg v4, gr100 - .reg v5, gr101 - .reg v6, gr102 - .reg v7, gr103 - .reg v8, gr104 - .reg v9, gr105 - .reg v10, gr106 - .reg v11, gr107 - .reg v12, gr108 - .reg v13, gr109 - .reg v14, gr110 - .reg v15, gr111 -; - .reg rsp, gr1 ; Register Stack Pointer - .reg ret, gr96 ; First word of return value - .reg rp0, gr112 ; Reserved for Programmer, #0 - .reg rp1, gr113 ; Reserved for Programmer, #1 - .reg rp2, gr114 ; Reserved for Programmer, #2 - .reg rp3, gr115 ; Reserved for Programmer, #3 - .reg tav, gr121 ; Temporary, Argument for Trap Handlers - .reg tpc, gr122 ; Temporary, Return PC for Trap Handlers - .reg lrp, gr123 ; Large Return Pointer - .reg slp, gr124 ; Static Link Pointer - .reg msp, gr125 ; Memory Stack Pointer - .reg rab, gr126 ; Register Allocate Bound - .reg rfb, gr127 ; Register Free Bound diff --git a/newlib/libc/sys/a29khif/sys/romdcl.h b/newlib/libc/sys/a29khif/sys/romdcl.h deleted file mode 100644 index d52ca0598..000000000 --- a/newlib/libc/sys/a29khif/sys/romdcl.h +++ /dev/null @@ -1,392 +0,0 @@ -; @(#)romdcl.h 1.4 90/10/14 20:56:12, Copyright 1988, 1989, 1990 AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - - .sbttl "Register, Constant and Macro Declarations - v1.4" - -; Copyright 1988, Advanced Micro Devices -; Written by Gibbons and Associates, Inc. - -;v1.4 JG correct FUNCTION macro - fault in register padding to even - -;----------------------------------------------------------------------- -;Global registers -;----------------------------------------------------------------------- - .reg rsp, gr1 ;local reg. var. stack pointer - - .equ SYS_TEMP, 64 ;system temp registers - - .reg st0, gr64 - .reg st1, gr65 - .reg st2, gr66 - .reg st3, gr67 - .reg st4, gr68 - .reg st5, gr69 - .reg st6, gr70 - .reg st7, gr71 - .reg st8, gr72 - .reg st9, gr73 - .reg st10, gr74 - .reg st11, gr75 - .reg st12, gr76 - .reg st13, gr77 - .reg st14, gr78 - .reg st15, gr79 - - .equ SYS_STAT, 80 ;system static registers - - .reg ss0, gr80 - .reg ss1, gr81 - .reg ss2, gr82 - .reg ss3, gr83 - .reg ss4, gr84 - .reg ss5, gr85 - .reg ss6, gr86 - .reg ss7, gr87 - .reg ss8, gr88 - .reg ss9, gr89 - .reg ss10, gr90 - .reg ss11, gr91 - .reg ss12, gr92 - .reg ss13, gr93 - .reg ss14, gr94 - .reg ss15, gr95 - - .equ RET_VAL, 96 ;return registers - - .reg v0, gr96 - .reg v1, gr97 - .reg v2, gr98 - .reg v3, gr99 - .reg v4, gr100 - .reg v5, gr101 - .reg v6, gr102 - .reg v7, gr103 - .reg v8, gr104 - .reg v9, gr105 - .reg v10, gr106 - .reg v11, gr107 - .reg v12, gr108 - .reg v13, gr109 - .reg v14, gr110 - .reg v15, gr111 - - .equ TEMP_REG, 96 ;temp registers - - .reg t0, gr96 - .reg t1, gr97 - .reg t2, gr98 - .reg t3, gr99 - .reg t4, gr100 - .reg t5, gr101 - .reg t6, gr102 - .reg t7, gr103 - .reg t8, gr104 - .reg t9, gr105 - .reg t10, gr106 - .reg t11, gr107 - .reg t12, gr108 - .reg t13, gr109 - .reg t14, gr110 - .reg t15, gr111 - - .equ RES_REG, 112 ;reserved (for user) - - .reg r0, gr112 - .reg r1, gr113 - .reg r2, gr114 - .reg r3, gr115 - - .equ TEMP_EXT, 116 ;temp extension (and shared) - - .reg x0, gr116 - .reg x1, gr117 - .reg x2, gr118 - .reg x3, gr119 - .reg x4, gr120 - .reg x5, gr121 - .reg x6, gr122 - .reg x7, gr123 - .reg x8, gr124 - -;----------------------------------------------------------------------- -;Global registers with special calling convention uses -;----------------------------------------------------------------------- - - .reg tav, gr121 ;trap handler argument (also x6) - .reg tpc, gr122 ;trap handler return (also x7) - .reg lsrp, gr123 ;large return pointer (also x8) - .reg slp, gr124 ;static link pointer (also x9) - .reg msp, gr125 ;memory stack pointer - .reg rab, gr126 ;register alloc bound - .reg rfb, gr127 ;register frame bound - -;----------------------------------------------------------------------- -;Local compiler registers - output parameters, etc. -; (only valid if frame has been established) -;----------------------------------------------------------------------- - - .reg p15, lr17 ;parameter registers - .reg p14, lr16 - .reg p13, lr15 - .reg p12, lr14 - .reg p11, lr13 - .reg p10, lr12 - .reg p9, lr11 - .reg p8, lr10 - .reg p7, lr9 - .reg p6, lr8 - .reg p5, lr7 - .reg p4, lr6 - .reg p3, lr5 - .reg p2, lr4 - .reg p1, lr3 - .reg p0, lr2 - - -;----------------------------------------------------------------------- -;TLB register count -;----------------------------------------------------------------------- - - .equ TLB_CNT, 128 - - .eject - -;----------------------------------------------------------------------- -;constants for general use -;----------------------------------------------------------------------- - .equ WRD_SIZ, 4 ;word size - .equ TRUE, 0x80000000 ;logical true -- bit 31 - .equ FALSE, 0x00000000 ;logical false -- 0 - .equ CHKPAT_a5, 0xa5a5a5a5 ;check pattern - -;----------------------------------------------------------------------- -;constants for data access control -;----------------------------------------------------------------------- - .equ CE, 0b1 ;coprocessor enable - .equ CD, 0b0 ;coprocessor disable - - .equ AS, 0b1000000 ;set for I/O - .equ PA, 0b0100000 ;set for physical ad - .equ SB, 0b0010000 ;set for set BP - .equ UA, 0b0001000 ;set for user access - - .equ ROM_OPT, 0b100 ;OPT values for acc - .equ DATA_OPT, 0b000 - .equ INST_OPT, 0b000 - - .equ ROM_CTL, (PA + ROM_OPT) ;control field - .equ DATA_CTL, (PA + DATA_OPT) - .equ INST_CTL, (PA + INST_OPT) - .equ IO_CTL, (AS + PA + DATA_OPT) - - - .eject - -;----------------------------------------------------------------------- -;defined vectors -;----------------------------------------------------------------------- - - .equ V_IllegalOp, 0 - .equ V_Unaligned, 1 - .equ V_OutOfRange, 2 - .equ V_NoCoProc, 3 - .equ V_CoProcExcept, 4 - .equ V_ProtViol, 5 - .equ V_InstAccExcept, 6 - .equ V_DataAccExcept, 7 - .equ V_UserInstTLB, 8 - .equ V_UserDataTLB, 9 - .equ V_SupInstTLB, 10 - .equ V_SupDataTLB, 11 - .equ V_InstTLBProt, 12 - .equ V_DataTLBProt, 13 - .equ V_Timer, 14 - .equ V_Trace, 15 - .equ V_INTR0, 16 - .equ V_INTR1, 17 - .equ V_INTR2, 18 - .equ V_INTR3, 19 - .equ V_TRAP0, 20 - .equ V_TRAP1, 21 - - ; 22 - 31 reserved - - .equ V_MULTIPLY, 32 - .equ V_DIVIDE, 33 - .equ V_MULTIPLU, 34 - .equ V_DIVIDU, 35 - .equ V_CONVERT, 36 - - ; 37 - 41 reserved - - .equ V_FEQ, 42 - .equ V_DEQ, 43 - .equ V_FGT, 44 - .equ V_DGT, 45 - .equ V_FGE, 46 - .equ V_DGE, 47 - .equ V_FADD, 48 - .equ V_DADD, 49 - .equ V_FSUB, 50 - .equ V_DSUB, 51 - .equ V_FMUL, 52 - .equ V_DMUL, 53 - .equ V_FDIV, 54 - .equ V_DDIV, 55 - - ; 56 - 63 reserved - - .equ V_SPILL, 64 - .equ V_FILL, 65 - .equ V_BSDCALL, 66 - .equ V_SYSVCALL, 67 - .equ V_BRKPNT, 68 - .equ V_EPI_OS, 69 - - .eject - - .macro R_LEFT,REGVAR - - ;Rotate left - ; - ; Parameters: REGVAR register to rotate - - add REGVAR, REGVAR, REGVAR ;shift left by 1 bit, C = MSB - addc REGVAR, REGVAR, 0 ;add C to LSB - - .endm -;---------------------------------------------------------------------- - - - .macro FUNCTION,NAME,INCNT,LOCCNT,OUTCNT - - ;Introduces a non-leaf routine. - ; - ;This macro defines the standard tag word before the function, - ;then establishes the statement label with the function's name - ;and finally allocates a register stack frame. It may not be used - ;if a memory stack frame is required. - ; - ;Note also that the size of the register stack frame is limited. - ;Neither this nor the lack of a memory frame is considered to be - ;a severe restriction in an assembly language environment. The - ;assembler will report errors if the requested frame is too large - ;for this macro. - ; - ;It may be good practice to allocate an even number of both output - ;registers and local registers. This will help in maintaining - ;double word alignment within these groups. The macro will assure - ;double word alignment of the stack frame as a whole as required - ;for correct linkage. - ; - ; Paramters: NAME the function name - ; INCNT input parameter count - ; LOCCNT local register count - ; OUTCNT output parameter count - - .set ALLOC_CNT, ((2 + OUTCNT + LOCCNT) << 2) - .set PAD_CNT, (ALLOC_CNT & 4) - .set ALLOC_CNT, (ALLOC_CNT + PAD_CNT) - .set REG_PAD, (PAD_CNT >> 2) - .if (INCNT) - .set IN_PRM, (4 + OUTCNT + REG_PAD + LOCCNT + 0x80) - .endif - .if (LOCCNT) - .set LOC_REG, (2 + OUTCNT + REG_PAD + 0x80) - .endif - .if (OUTCNT) - .set OUT_PRM, (2 + 0x80) - .endif - - .word ((2 + OUTCNT + LOCCNT) << 16) -NAME: - sub rsp, rsp, ALLOC_CNT - asgeu V_SPILL, rsp, rab - add lr1, rsp, ((4 + OUTCNT + LOCCNT + REG_PAD + INCNT) << 2) - - .endm -;---------------------------------------------------------------------- - - - .macro LEAF,NAME,INCNT - - ;Introduces a leaf routine - ; - ;This macro defines the standard tag word before the function, - ;then establishes the statement label with the function's name. - ; - ; Paramters: NAME the function name - ; INCNT input parameter count - - .if (INCNT) - .set IN_PRM, (2 + 0x80) - .endif - .set ALLOC_CNT, 0 - - .word 0 -NAME: - - .endm -;---------------------------------------------------------------------- - - - .macro EPILOGUE - - ;De-allocates register stack frame (only and only if necessary). - - .if (ALLOC_CNT) - - add rsp, rsp, ALLOC_CNT - nop - jmpi lr0 - asleu V_FILL, lr1, rfb - - .else - - jmpi lr0 - nop - - .endif - - .set IN_PRM, (1024) ;illegal, to cause err on ref - .set LOC_REG, (1024) ;illegal, to cause err on ref - .set OUT_PRM, (1024) ;illegal, to cause err on ref - .set ALLOC_CNT, (1024) ;illegal, to cause err on ref - - .endm -;---------------------------------------------------------------------- - - -;Initial values for macro set variables to guard against misuse - - .set IN_PRM, (1024) ;illegal, to cause err on ref - .set LOC_REG, (1024) ;illegal, to cause err on ref - .set OUT_PRM, (1024) ;illegal, to cause err on ref - .set ALLOC_CNT, (1024) ;illegal, to cause err on ref - -;...................................................................... -; end of romdcl.h diff --git a/newlib/libc/sys/a29khif/sys/smartmac.h b/newlib/libc/sys/a29khif/sys/smartmac.h deleted file mode 100644 index 2c870fa2a..000000000 --- a/newlib/libc/sys/a29khif/sys/smartmac.h +++ /dev/null @@ -1,1491 +0,0 @@ -; @(#)smartmac.h 1.2 90/10/14 20:56:14, AMD -; start of smartmac.h file -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1988, 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; - .title "AM29000 Smart Macro Package" -; -; Floating point package for AMD 29000 family -; -; Copyright 1988 Advanced Micro Devices, Inc. -; -; All rights reserved -; -; Developed for AMD by Quantitative Technology Corporation -; 8700 SW Creekside Place Suite D -; Beaverton OR 97005 -; (503) 626-3081 -; -; Version information : -; -; Version 1.0 - 1 June 1988 - Larry Westerman (smart_macros.h) -; -; Revision 1.4 89/02/01 18:26:03 jimh -; Changed to relect the new symbols from Bob Perlman, and the new include file.s -; -; Revision 1.3 89/01/31 10:13:34 jimh -; Updated to use symbols from Bob Perlmans fpsymbol.h file. This is -; an extensive change. -; -; Revision 1.2 89/01/26 09:23:50 jimh -; This version checked in previous to substituting Bob Perlman's floating -; point symbols. -; -; Revision 1.1 89/01/24 13:23:29 jim -; Initial revision -; Replaces smart_macros.h ver 1.11. -; -; -; -; -; NOTES: -; -; This package makes the following assumptions about the use of these -; smart macros: -; -; 1. These macros will be after the entry code for a transcendental -; routine. This entry code will move the original function arguments -; (by value, if the target language is FORTRAN) into the global -; registers t0/t1 and t2/t3 (t0 and t2 for single precision -; routines). -; 2. The sources of all operands will be one register from the -; following list: -; t0 or t2 - the source is one of the original input operands -; rtn0 - the source is rtn0, which should be used as the -; source for all constant values to be sent to the -; AM29027 (when used) -; FP0 - FP7 - the source is one of the fp registers -; 3. The destination of all operations will be a register from the -; following list: -; rtn0 - the destination is the function return value -; FP0 - FP7 - the destination is one of the fp registers -; 4. The additional registers available for temporary use are -; t4, lrp, and slp. -; -; These register definitions are all taken from the file "proregs.a" -; which was supplied by AMD. NOTE that the FP0-FP7 registers, for the -; Am29000 version of the file, overlap with the rtn0-rtn15 registers, so -; that FP0 corresponds to rtn0/rtn1, FP1 to rtn2/rtn3, and so forth. -; - .equ ERROR,0 - .equ NO_ERROR,1 - - .equ DOUBLE_FUNCTION,0 - .equ SINGLE_FUNCTION,1 - - .equ T_OPERATION,0 - .equ Q_OPERATION,1 - - .equ R_SOURCE_29000,0 - .equ R_SOURCE_29027,1 - - .equ S_SOURCE_29000,0 - .equ S_SOURCE_29027,1 - - .equ DESTINATION_29000, 0 - .equ DESTINATION_29027, 1 - -; -; SMART MACRO : mfadd -; -; FUNCTION : single-precision floating point addition -; -; Required arguments : destination - one of possible destinations -; operand1 - one of possible sources -; operand2 - one of possible sources -; - .macro mfadd,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "mfadd: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; For 29027 mode, perform full suite of checking - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_S_S | CP_P_PLUS_T - .set OPERATION_TYPE, T_OPERATION - perform_single_operation destination,operand1,operand2 - read_single_result destination - ; - ; Save the instruction for the next macro invocation - ; - .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION - - .else - ; - ; For 29000 mode, simply produce equivalent trap-inducing instruction - ; - fadd destination,operand1,operand2 - - .endif - - .endm ; end of mfadd macro definition - -; -; SMART MACRO : mfsub -; -; FUNCTION : single-precision floating point subtraction -; -; Required arguments : destination - one of possible destinations -; operand1 - one of possible sources -; operand2 - one of possible sources -; - .macro mfsub,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "mfsub: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; For 29027 mode, perform full suite of checking - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_S_S | CP_P_MINUS_T - .set OPERATION_TYPE, T_OPERATION - perform_single_operation destination,operand1,operand2 - read_single_result destination - ; - ; Save the instruction for the next macro invocation - ; - .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION - - .else - ; - ; For 29000 mode, simply produce equivalent trap-inducing instruction - ; - fsub destination,operand1,operand2 - - .endif - - .endm ; end of mfsub macro definition - -; -; SMART MACRO : mfmul -; -; FUNCTION : single-precision floating point multiplication -; -; Required arguments : destination - one of possible destinations -; operand1 - one of possible sources -; operand2 - one of possible sources -; - .macro mfmul,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "mfmul: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; For 29027 mode, perform full suite of checking - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_S_S | CP_P_TIMES_Q - .set OPERATION_TYPE, Q_OPERATION - perform_single_operation destination,operand1,operand2 - read_single_result destination - ; - ; Save the instruction for the next macro invocation - ; - .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION - - .else - ; - ; For 29000 mode, simply produce equivalent trap-inducing instruction - ; - fmul destination,operand1,operand2 - - .endif - - .endm ; end of mfmul macro definition - -; -; SMART MACRO : mfdiv -; -; FUNCTION : single-precision floating point divide -; -; Required arguments : destination - one of possible destinations -; operand1 - one of possible sources -; operand2 - one of possible sources -; - .macro mfdiv,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "mfdiv: missing parameter(s)" - .exitm - .endif - - ; - ; Generate the trap instruction in all cases - ; - fdiv destination, operand1, operand2 - - .endm ; end of mfdiv macro definition - - -; -; SMART MACRO : mdadd -; -; FUNCTION : double-precision floating point addition -; -; Required arguments : destination - one of possible destinations -; operand1 - one of possible sources -; operand2 - one of possible sources -; - .macro mdadd,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "mdadd: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; For 29027 mode, perform full suite of checking - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_D_D | CP_P_PLUS_T - .set OPERATION_TYPE, T_OPERATION - perform_double_operation destination,operand1,operand2 - read_double_result destination - ; - ; Save the instruction for the next macro invocation - ; - .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION - - .else - ; - ; For 29000 mode, simply produce equivalent trap-inducing instruction - ; - dadd destination,operand1,operand2 - - .endif - - .endm ; end of mdadd macro definition - -; -; SMART MACRO : mdsub -; -; FUNCTION : double-precision floating point subtraction -; -; Required arguments : destination - one of possible destinations -; operand1 - one of possible sources -; operand2 - one of possible sources -; - .macro mdsub,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "mdsub: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; For 29027 mode, perform full suite of checking - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_D_D | CP_P_MINUS_T - .set OPERATION_TYPE, T_OPERATION - perform_double_operation destination,operand1,operand2 - read_double_result destination - ; - ; Save the instruction for the next macro invocation - ; - .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION - - .else - ; - ; For 29000 mode, simply produce equivalent trap-inducing instruction - ; - dsub destination,operand1,operand2 - - .endif - - .endm ; end of mdsub macro definition - -; -; SMART MACRO : mdmul -; -; FUNCTION : double-precision floating point multiplication -; -; Required arguments : destination - one of possible destinations -; operand1 - one of possible sources -; operand2 - one of possible sources -; - .macro mdmul,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "mdmul: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; For 29027 mode, perform full suite of checking - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_D_D | CP_P_TIMES_Q - .set OPERATION_TYPE, Q_OPERATION - perform_double_operation destination,operand1,operand2 - read_double_result destination - ; - ; Save the instruction for the next macro invocation - ; - .set PREVIOUS_INSTRUCTION, CURRENT_INSTRUCTION - - .else - ; - ; For 29000 mode, simply produce equivalent trap-inducing instruction - ; - dmul destination,operand1,operand2 - - .endif - - .endm ; end of mdmul macro definition - -; -; SMART MACRO : mddiv -; -; FUNCTION : double-precision floating point divide -; -; Required arguments : destination - one of possible destinations -; operand1 - one of possible sources -; operand2 - one of possible sources -; - .macro mddiv,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "mddiv: missing parameter(s)" - .exitm - .endif - - ; - ; Generate the trap instruction in all cases - ; - ddiv destination, operand1, operand2 - - .endm ; end of mfdiv macro definition - -; -; SMART MACRO: mconvert -; -; FUNCTION: Floating point/integer conversion -; -; PARAMETERS: destination - one of the possible destinations -; source - one of the possible sources -; sign_flag - one of SIGNED or UNSIGNED -; rounding_mode - one of ROUND_TO_NEAREST, ROUND_TO_PLUS, -; ROUND_TO_MINUS, ROUND_TO_ZERO -; destination_precision - one of FORMAT_INTEGER, FORMAT_DOUBLE, -; or FORMAT_SINGLE -; source_precision - one of FORMAT_INTEGER, FORMAT_DOUBLE, -; or FORMAT_SINGLE -; - .macro mconvert, destination, source, sign_flag, rounding_mode, destination_precision, source_precision - - .if $narg!=6 - .err - .print "mconvert: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; Generate in line 29027 code - ; - initialize_previous_instruction - .if ( destination_precision == FORMAT_INTEGER ) - .set CURRENT_INSTRUCTION, CP_CONVERT_T_TO_INT - select_T_operand source - .if ( source_precision == FORMAT_DOUBLE ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_S_D - .else - .if ( source_precision == FORMAT_SINGLE ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_S_S - .else - .err - .print "mconvert: invalid source type" - .exitm - .endif - .endif - .else - .if ( destination_precision == FORMAT_DOUBLE ) - .if ( source_precision == FORMAT_SINGLE ) - .set CURRENT_INSTRUCTION, CP_PASS_P | CP_P_EQ_R | CP_D_S - select_P_operand source - .else - .if ( source_precision == FORMAT_INTEGER ) - .set CURRENT_INSTRUCTION, CP_I_CONVERT_T_TO_FLOAT | CP_D_S - select_T_operand source - .else - .err - .print "mconvert: invalid source type" - .exitm - .endif - .endif - .else - .if ( destination_precision == FORMAT_SINGLE ) - .if ( source_precision == FORMAT_DOUBLE ) - .set CURRENT_INSTRUCTION, CP_PASS_P | CP_P_EQ_R | CP_S_D - select_P_operand source - .else - .if ( source_precision == FORMAT_INTEGER ) - .set CURRENT_INSTRUCTION, CP_I_CONVERT_T_TO_FLOAT | CP_S_S - select_T_operand source - .else - .err - .print "mconvert: invalid source type" - .exitm - .endif - .endif - .else - .err - .print "mconvert: invalid destination type " - .exitm - .endif - .endif - .endif - ; - ; Perform the operation, using a 29027 dummy register as the second - ; source operand, to avoid writing any data inappropriately to the - ; 29027 - ; - select_destination destination - .set S_SOURCE, S_SOURCE_29027 - .if ( source_precision == FORMAT_DOUBLE ) - write_and_execute_double_operation source, FP0 - .else - write_and_execute_single_operation source, FP0 - .endif - .if ( destination_precision == FORMAT_DOUBLE ) - read_double_result destination - .else - .if ( destination_precision == FORMAT_SINGLE ) - read_single_result destination - .else - read_integer_result destination - .endif - .endif - .else - ; - ; For 29000 mode (the default) just invoke the trap-inducing instruction - ; - convert destination,source,sign_flag,rounding_mode,destination_precision,source_precision - - .endif - - .endm ; end of mfeq macro definition - -; -; SMART MACRO: mfeq -; -; FUNCTION: Single precision, floating point compare -; -; PARAMETERS: destination - one of the possible destinations -; operand1 - one of the possible sources -; operand2 - one of the possible sources -; - .macro mfeq, destination, operand1, operand2 - - .if $narg!=3 - .err - .print "mfeq: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; Generate in line 29027 code - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_S_S | CP_COMPARE_P_AND_T - .set OPERATION_TYPE, T_OPERATION - select_destination destination - ; - ; 29027 registers are not valid destinations for compare operations - ; If the destination is a 29000 register, write the appropriate - ; Boolean value to that register. - ; - .if ( DESTINATION == DESTINATION_29027 ) - .err - .print "29027 destinations invalid for compares - @destination@" - .exitm - .else - perform_single_operation destination, operand1, operand2 - cp_read_flags destination - srl destination, destination, CP_EQUAL_FLAG_POSITION - sll destination, destination, 31 - .endif - - .else - ; - ; For 29000 mode (the default) just invoke the trap-inducing instruction - ; - feq destination,operand1,operand2 - - .endif - - .endm ; end of mfeq macro definition - -; -; SMART MACRO: mfge -; -; FUNCTION: Single precision, floating point compare -; -; PARAMETERS: destination - one of the possible destinations -; operand1 - one of the possible sources -; operand2 - one of the possible sources -; - .macro mfge, destination, operand1, operand2 - - .if $narg!=3 - .err - .print "mfge: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; Generate in line 29027 code - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_S_S | CP_COMPARE_P_AND_T - .set OPERATION_TYPE, T_OPERATION - select_destination destination - ; - ; 29027 registers are not valid destinations for compare operations - ; If the destination is a 29000 register, write the appropriate - ; Boolean value to that register. - ; - .if ( DESTINATION == DESTINATION_29027 ) - .err - .print "29027 destinations invalid for compares - @destination@" - .exitm - .else - perform_single_operation destination, operand1, operand2 - cp_read_flags destination - and destination, destination, CP_EQUAL_FLAG | CP_GREATER_THAN_FLAG - cpneq destination, destination, 0x0 - .endif - - .else - ; - ; For 29000 mode (the default) just invoke the trap-inducing instruction - ; - fge destination,operand1,operand2 - - .endif - - .endm ; end of mfge macro definition - -; -; SMART MACRO: mfgt -; -; FUNCTION: Single precision, floating point compare -; -; PARAMETERS: destination - one of the possible destinations -; operand1 - one of the possible sources -; operand2 - one of the possible sources -; - .macro mfgt, destination, operand1, operand2 - - .if $narg!=3 - .err - .print "mfgt: missing parameter(s)" - .exitm - .endif - - .ifdef _29027_MODE - ; - ; Generate in line 29027 code - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_S_S | CP_COMPARE_P_AND_T - .set OPERATION_TYPE, T_OPERATION - select_destination destination - ; - ; 29027 registers are not valid destinations for compare operations - ; If the destination is a 29000 register, write the appropriate - ; Boolean value to that register. - ; - .if ( DESTINATION == DESTINATION_29027 ) - .err - .print "29027 destinations invalid for compares - @destination@" - .exitm - .else - perform_single_operation destination, operand1, operand2 - cp_read_flags destination - srl destination, destination, CP_GREATER_THAN_FLAG_POSITION - sll destination, destination, 31 - .endif - - .else - ; - ; For 29000 mode (the default) just invoke the trap-inducing instruction - ; - fgt destination,operand1,operand2 - - .endif - - .endm ; end of mfgt macro definition - -; -; SMART MACRO: mdeq -; -; FUNCTION: Double precision, floating point compare -; -; PARAMETERS: destination - one of the possible destinations -; operand1 - one of the possible sources -; operand2 - one of the possible sources -; - .macro mdeq, destination, operand1, operand2 - - .if $narg!=3 - .err - .print "mdeq: missing parameter(s)" - .exitm - .endif - - - .ifdef _29027_MODE - ; - ; Generate in line 29027 code - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_D_D | CP_COMPARE_P_AND_T - .set OPERATION_TYPE, T_OPERATION - select_destination destination - ; - ; 29027 registers are not valid destinations for compare operations - ; If the destination is a 29000 register, write the appropriate - ; Boolean value to that register. - ; - .if ( DESTINATION == DESTINATION_29027 ) - .err - .print "29027 destinations invalid for compare - @destination@" - .exitm - .else - perform_double_operation destination, operand1, operand2 - cp_read_flags destination - srl destination, destination, CP_EQUAL_FLAG_POSITION - sll destination, destination, 31 - .endif - .else - ; - ; For 29000 mode (the default) just invoke the trap-inducing instruction - ; - deq destination,operand1,operand2 - - .endif - - .endm ; end of mdeq macro definition - -; -; SMART MACRO: mdge -; -; FUNCTION: Double precision, floating point compare -; -; PARAMETERS: destination - one of the possible destinations -; operand1 - one of the possible sources -; operand2 - one of the possible sources -; - .macro mdge, destination, operand1, operand2 - - .if $narg!=3 - .err - .print "mdge: missing parameter(s)" - .exitm - .endif - - - .ifdef _29027_MODE - ; - ; Generate in line 29027 code - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_D_D | CP_COMPARE_P_AND_T - .set OPERATION_TYPE, T_OPERATION - select_destination destination - ; - ; 29027 registers are not valid destinations for compare operations - ; If the destination is a 29000 register, write the appropriate - ; Boolean value to that register. - ; - .if ( DESTINATION == DESTINATION_29027 ) - .err - .print "29027 destinations invalid for compare - @destination@" - .exitm - .else - perform_double_operation destination, operand1, operand2 - cp_read_flags destination - and destination, destination, CP_EQUAL_FLAG | CP_GREATER_THAN_FLAG - cpneq destination, destination, 0x0 - .endif - .else - ; - ; For 29000 mode (the default) just invoke the trap-inducing instruction - ; - dge destination,operand1,operand2 - - .endif - - .endm ; end of mdge macro definition - -; -; SMART MACRO: mdgt -; -; FUNCTION: Double precision, floating point compare -; -; PARAMETERS: destination - one of the possible destinations -; operand1 - one of the possible sources -; operand2 - one of the possible sources -; - .macro mdgt, destination, operand1, operand2 - - .if $narg!=3 - .err - .print "mdgt: missing parameter(s)" - .exitm - .endif - - - .ifdef _29027_MODE - ; - ; Generate in line 29027 code - ; - initialize_previous_instruction - .set CURRENT_INSTRUCTION, CP_D_D | CP_COMPARE_P_AND_T - .set OPERATION_TYPE, T_OPERATION - select_destination destination - ; - ; 29027 registers are not valid destinations for compare operations - ; If the destination is a 29000 register, write the appropriate - ; Boolean value to that register. - ; - .if ( DESTINATION == DESTINATION_29027 ) - .err - .print "29027 destinations invalid for compare - @destination@" - .exitm - .else - perform_double_operation destination, operand1, operand2 - cp_read_flags destination - srl destination, destination, CP_GREATER_THAN_FLAG_POSITION - sll destination, destination, 31 - .endif - .else - ; - ; For 29000 mode (the default) just invoke the trap-inducing instruction - ; - dgt destination,operand1,operand2 - - .endif - - .endm ; end of mdgt macro definition - -; -; MACRO NAME : perform_double_operation -; -; FUNCTION : After the instruction base is set up, do the appropriate checking -; to send the instruction if necessary, send the double-precision -; operands if necessary, and start the operation -; -; PARAMETERS : destination - one of possible destination operands -; operand1 - one of possible source operands -; operand2 - one of possible source operands -; - .macro perform_double_operation,destination,operand1,operand2 - - .if $narg!=3 - .err - .print "perform_double_operation: missing parameter(s)" - .exitm - .endif - - ; - ; Start defining the instruction - ; - select_destination destination - select_P_operand operand1 - select_S_operand operand2 - - write_and_execute_double_operation operand1, operand2 - - .endm ; End of perform_double_operation macro definition - -; -; MACRO NAME : perform_single_operation -; -; FUNCTION : After the instruction base is set up, do the appropriate checking -; to send the instruction if necessary, send the single-precision -; operands if necessary and start the operation -; -; PARAMETERS : destination - one of possible destination operands -; operand1 - one of possible source operands -; operand2 - one of possible source operands -; - .macro perform_single_operation,destination,operand1,operand2 - - ; - ; Start defining the instruction - ; - select_destination destination - select_P_operand operand1 - select_S_operand operand2 - write_and_execute_single_operation operand1,operand2 - - .endm ; End of perform_single_operation macro definition - -; -; MACRO NAME : write_and_execute_double_operation -; -; FUNCTION : Write the instruction and operands for a double-precision -; operation, and start the operation -; -; PARAMETER : operand1 - first operand of double-precision operation -; operand2 - second operand of operation -; - .macro write_and_execute_double_operation,operand1,operand2 - .if ( ( R_SOURCE == R_SOURCE_29027 ) && ( S_SOURCE == S_SOURCE_29027 ) ) - ; - ; If both sources are within the 29027, write the instruction - ; and start the operation - ; - const t4, CURRENT_INSTRUCTION - consth t4, CURRENT_INSTRUCTION - cp_write_inst t4, START - .else - ; - ; One or both of the sources must be written first, so check the - ; previous instruction - ; - const t4, CURRENT_INSTRUCTION - consth t4, CURRENT_INSTRUCTION - cp_write_inst t4 - .if ( R_SOURCE == R_SOURCE_29000 ) && ( S_SOURCE == S_SOURCE_29027 ) - .ifeqs "@operand1@","t0" - cp_write_r t0, t1, START - .else - .ifeqs "@operand1@","t2" - cp_write_r t2, t3, START - .else - .ifeqs "@operand1@","rtn0" - cp_write_r rtn0, rtn1, START - .else - .err - .print "Invalid source for double operation - @operand1@" - .exitm - .endif - .endif - .endif - .endif - .if ( R_SOURCE == R_SOURCE_29027 ) && ( S_SOURCE == S_SOURCE_29000 ) - .ifeqs "@operand2@","t0" - cp_write_s t0, t1, START - .else - .ifeqs "@operand2@","t2" - cp_write_s t2, t3, START - .else - .ifeqs "@operand2@","rtn0" - cp_write_s rtn0, rtn1, START - .else - .err - .print "Invalid source for double operation - @operand1@" - .exitm - .endif - .endif - .endif - .endif - .if ( R_SOURCE == R_SOURCE_29000 ) && ( S_SOURCE == S_SOURCE_29000 ) - .ifeqs "@operand1@","t0" - cp_write_r t0, t1 - .else - .ifeqs "@operand1@","t2" - cp_write_r t2, t3 - .else - .ifeqs "@operand1@","rtn0" - cp_write_r rtn0, rtn1 - .else - .err - .print "Invalid source for double operation - @operand1@" - .exitm - .endif - .endif - .endif - .ifeqs "@operand2@","t0" - cp_write_s t0, t1, START - .else - .ifeqs "@operand2@","t2" - cp_write_s t2, t3, START - .else - .ifeqs "@operand2@","rtn0" - cp_write_s rtn0, rtn1, START - .else - .err - .print "Invalid source for double operation - @operand1@" - .exitm - .endif - .endif - .endif - .endif - .endif - - .endm ; end of write_and_execute_double_operation macro definition - -; -; MACRO NAME : write_and_execute_single_operation -; -; FUNCTION : If necessary, read the result from the 29027 into a -; register on the 29000 -; -; PARAMETER : operand1 - first source for single-precision operation -; operand2 - second source for operation -; - .macro write_and_execute_single_operation,operand1,operand2 - - .if ( ( R_SOURCE == R_SOURCE_29027 ) && ( S_SOURCE == S_SOURCE_29027 ) ) - ; - ; If both sources are within the 29027, write the instruction - ; and start the operation - ; - const t4, CURRENT_INSTRUCTION - consth t4, CURRENT_INSTRUCTION - cp_write_inst t4, START - .else - ; - ; One or both of the sources must be written first, so check the - ; previous instruction - ; - const t4,CURRENT_INSTRUCTION - consth t4,CURRENT_INSTRUCTION - cp_write_inst t4, START - .if ( R_SOURCE == R_SOURCE_29000 ) && ( S_SOURCE == S_SOURCE_29027 ) - cp_write_r operand1, operand1, START - .endif - .if ( R_SOURCE == R_SOURCE_29027 ) && ( S_SOURCE == S_SOURCE_29000 ) - cp_write_s operand2, operand2, START - .endif - .if ( R_SOURCE == R_SOURCE_29000 ) && ( S_SOURCE == S_SOURCE_29000 ) - cp_write_rs operand1, operand2, START - .endif - .endif - - .endm ; End of write_and_execute_single_operation macro definition - -; -; MACRO NAME : read_double_result -; -; FUNCTION : If necessary, read the result from the 29027 into a -; register on the 29000 -; -; PARAMETER : destination - one of the possible destination registers -; - .macro read_double_result,destination - .if ( DESTINATION == DESTINATION_29000 ) - ; - ; If the destination is not within the 29027 register file, read - ; the result and store it into the correct register in the 29000 - ; - .ifeqs "@destination@","rtn0" - cp_read_dp rtn0, rtn1 - .else - .err - .print "Invalid destination for double result - @destination@" - .exitm - .endif - .endif - - .endm ; End of read_double_result macro definition - -; -; MACRO NAME : read_single_result -; -; FUNCTION : If necessary, read the result from the 29027 into a -; register on the 29000 -; -; PARAMETER : destination -; - .macro read_single_result,destination - - .if ( DESTINATION == DESTINATION_29000 ) - ; - ; If the destination is not within the 29027 register file, read - ; the result and store it into the correct register in the 29000 - ; - .ifeqs "@destination@","rtn0" - cp_read_sp rtn0 - .else - .err - .print "Invalid destination for single result - @destination@" - .exitm - .endif - .endif - - .endm ; End of read_single_result macro definition - -; -; MACRO NAME : read_integer_result -; -; FUNCTION : If necessary, read the result from the 29027 into a -; register on the 29000 -; -; PARAMETER : destination -; - .macro read_integer_result,destination - - .if ( DESTINATION == DESTINATION_29000 ) - ; - ; If the destination is not within the 29027 register file, read - ; the result and store it into the correct register in the 29000 - ; - .ifeqs "@destination@","rtn0" - cp_read_int rtn0 - .else - .err - .print "Invalid destination for single result - @destination@" - .exitm - .endif - .endif - - .endm ; End of read_integer_result macro definition - -; -; MACRO NAME : select_P_operand -; -; FUNCTION : Given an operand, determine if the operand is from the -; register file, and if so, set the appropriate bits in -; the current instruction word. In addition, set the -; variable R_SOURCE to 0 for local register file, or 1 for -; floating-point register file. -; -; PARAMETER : operand1 - one of the possible source operands -; - .macro select_P_operand,operand1 - .ifeqs "@operand1@","t0" - .set R_SOURCE,R_SOURCE_29000 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_R - .exitm - .endif - .ifeqs "@operand1@","t2" - .set R_SOURCE,R_SOURCE_29000 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_R - .exitm - .endif - .ifeqs "@operand1@","rtn0" - .set R_SOURCE,R_SOURCE_29000 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_R - .exitm - .endif - .ifeqs "@operand1@","FP0" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF0 - .exitm - .endif - .ifeqs "@operand1@","FP1" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF1 - .exitm - .endif - .ifeqs "@operand1@","FP2" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF2 - .exitm - .endif - .ifeqs "@operand1@","FP3" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF3 - .exitm - .endif - .ifeqs "@operand1@","FP4" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF4 - .exitm - .endif - .ifeqs "@operand1@","FP5" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF5 - .exitm - .endif - .ifeqs "@operand1@","FP6" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF6 - .exitm - .endif - .ifeqs "@operand1@","FP7" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_P_EQ_RF7 - .exitm - .endif - .err - .print "@operand1@ - Invalid operand" - - .endm ; end of select_P_operand macro definition - -; -; MACRO NAME : select_S_operand -; -; FUNCTION : Given an operand, determine if the operand is from the -; register file, and if so, set the appropriate bits in -; the current instruction word. In addition, set the -; variable S_SOURCE to S_SOURCE_29000 or S_SOURCE_29027 -; as appropriate -; -; PARAMETER : operand2 - one of the possible source operands -; - .macro select_S_operand,operand2 - .ifeqs "@operand2@","t0" - .set S_SOURCE,S_SOURCE_29000 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_S - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_S - .endif - .exitm - .endif - .ifeqs "@operand2@","t2" - .set S_SOURCE,S_SOURCE_29000 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_S - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_S - .endif - .exitm - .endif - .ifeqs "@operand2@","rtn0" - .set S_SOURCE,S_SOURCE_29000 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_S - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_S - .endif - .exitm - .endif - .ifeqs "@operand2@","FP0" - .set S_SOURCE,S_SOURCE_29027 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF0 - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF0 - .endif - .exitm - .endif - .ifeqs "@operand2@","FP1" - .set S_SOURCE,S_SOURCE_29027 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF1 - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF1 - .endif - .exitm - .endif - .ifeqs "@operand2@","FP2" - .set S_SOURCE,S_SOURCE_29027 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF2 - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF2 - .endif - .exitm - .endif - .ifeqs "@operand2@","FP3" - .set S_SOURCE,S_SOURCE_29027 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF3 - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF3 - .endif - .exitm - .endif - .ifeqs "@operand2@","FP4" - .set S_SOURCE,S_SOURCE_29027 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF4 - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF4 - .endif - .exitm - .endif - .ifeqs "@operand2@","FP5" - .set S_SOURCE,S_SOURCE_29027 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF5 - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF5 - .endif - .exitm - .endif - .ifeqs "@operand2@","FP6" - .set S_SOURCE,S_SOURCE_29027 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF6 - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF6 - .endif - .exitm - .endif - .ifeqs "@operand2@","FP7" - .set S_SOURCE,S_SOURCE_29027 - .if ( OPERATION_TYPE == T_OPERATION ) - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF7 - .else - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_Q_EQ_RF7 - .endif - .exitm - .endif - .err - .print "@operand2@ - Invalid operand" - - .endm ; end of select_S_operand macro definition - -; -; MACRO NAME : select_T_operand -; -; FUNCTION : Given an operand, determine if the operand is from the -; register file, and if so, set the appropriate bits in -; the current instruction word, to read the corresponding -; source into the T operand. In addition, set the -; variable R_SOURCE to 0 for local register file, or 1 for -; floating-point register file. -; -; PARAMETER : operand1 - one of the possible source operands -; - .macro select_T_operand,operand1 - .ifeqs "@operand1@","t0" - .set R_SOURCE,R_SOURCE_29000 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_R - .exitm - .endif - .ifeqs "@operand1@","t2" - .set R_SOURCE,R_SOURCE_29000 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_R - .exitm - .endif - .ifeqs "@operand1@","rtn0" - .set R_SOURCE,R_SOURCE_29000 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_R - .exitm - .endif - .ifeqs "@operand1@","FP0" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF0 - .exitm - .endif - .ifeqs "@operand1@","FP1" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF1 - .exitm - .endif - .ifeqs "@operand1@","FP2" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF2 - .exitm - .endif - .ifeqs "@operand1@","FP3" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF3 - .exitm - .endif - .ifeqs "@operand1@","FP4" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF4 - .exitm - .endif - .ifeqs "@operand1@","FP5" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF5 - .exitm - .endif - .ifeqs "@operand1@","FP6" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF6 - .exitm - .endif - .ifeqs "@operand1@","FP7" - .set R_SOURCE,R_SOURCE_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_T_EQ_RF7 - .exitm - .endif - .err - .print "@operand1@ - Invalid operand" - - .endm ; end of select_T_operand macro definition - -; -; MACRO NAME : select_destination -; -; FUNCTION : Given a destination, determine if the operand is from the -; register file, and if so, set the appropriate bits in -; the current instruction word. In addition, set the -; variable DESTINATION to DESTINATION_29000 or -; DESTINATION_29027 as appropriate -; -; PARAMETER : destination - one of the possible destination operands -; - .macro select_destination,destination - .ifeqs "@destination@","rtn0" - .set DESTINATION,DESTINATION_29000 - .exitm - .endif - .ifeqs "@destination@","FP0" - .set DESTINATION,DESTINATION_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF0 - .exitm - .endif - .ifeqs "@destination@","FP1" - .set DESTINATION,DESTINATION_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF1 - .exitm - .endif - .ifeqs "@destination@","FP2" - .set DESTINATION,DESTINATION_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF2 - .exitm - .endif - .ifeqs "@destination@","FP3" - .set DESTINATION,DESTINATION_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF3 - .exitm - .endif - .ifeqs "@destination@","FP4" - .set DESTINATION,DESTINATION_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF4 - .exitm - .endif - .ifeqs "@destination@","FP5" - .set DESTINATION,DESTINATION_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF5 - .exitm - .endif - .ifeqs "@destination@","FP6" - .set DESTINATION,DESTINATION_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF6 - .exitm - .endif - .ifeqs "@destination@","FP7" - .set DESTINATION,DESTINATION_29027 - .set CURRENT_INSTRUCTION, CURRENT_INSTRUCTION | CP_DEST_EQ_RF7 - .exitm - .endif - .err - .print "@destination@ - Invalid operand" - - .endm ; end of select_destination macro definition - -; MACRO NAME : initialize_previous_instruction -; -; FUNCTION : Make sure the previous instruction is defined and set to zero -; - .macro initialize_previous_instruction - - .ifndef PREVIOUS_INSTRUCTION - ; - ; Make sure that the previous instruction variable is initialized - ; - .set PREVIOUS_INSTRUCTION,0 - .endif - - .endm ; end of initialize_previous_instruction macro definition - - -; MACRO NAME : prepare_function_parameters -; -; FUNCTION : To place the input parameters into the correct position for -; use by the function body. When the target language is -; FORTRAN, the values of the input arguments are read from the -; supplied addresses and moved to the t0-t3 temporary area. -; When the target language is C or Pascal, the values of the -; input arguments are simply moved to the t0-t3 temporary area. -; - .macro prepare_function_parameters,arg1,arg2 - - .if $narg==0 - .err - .print "Missing function argument(s)" - .exitm - .endif - - .if $narg>2 - .err - .print "Too many function arguments - .exitm - .endif - - .if $narg>=1 - .if $isreg(@arg1) - .ifdef FORTRAN - load 0,0,t0,arg1 - .if ( FUNCTION_TYPE == DOUBLE_FUNCTION ) - add t1,arg1,4 - load 0,0,t1,t1 - .endif - .else - add t0,arg1,0 - .if ( FUNCTION_TYPE == DOUBLE_FUNCTION ) - add t1,%%(&arg1+1),0 - .endif - .endif - .else - .err - .print "Function argument not register - @arg1@" - .endif - .endif - .if $narg==2 - .if $isreg (@arg2) - .ifdef FORTRAN - load 0,0,t2,arg2 - .if ( FUNCTION_TYPE == DOUBLE_FUNCTION ) - add t3,arg2,4 - load 0,0,t3,t3 - .endif - .else - add t2,arg2,0 - .if ( FUNCTION_TYPE == DOUBLE_FUNCTION ) - add t3,%%(&arg2+1),0 - .endif - .endif - .else - .err - .print "Function argument not register - @arg2@" - .endif - .endif - - .endm ; end of prepare_function_parameters macro definition - -; end of smartmac.h file diff --git a/newlib/libc/sys/a29khif/sys/sysmac.h b/newlib/libc/sys/a29khif/sys/sysmac.h deleted file mode 100644 index 01ff9eec2..000000000 --- a/newlib/libc/sys/a29khif/sys/sysmac.h +++ /dev/null @@ -1,165 +0,0 @@ -; @(#)sysmac.h 1.7 90/10/14 20:56:17, Copyright 1988, 1989, 1990 AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1988, 1989, 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; sysmac.h -; - .include "sys/proreg.h" - -; Supported system call function numbers - BSD emulation - - .equ BSD_exit, 1 - .equ BSD_open, 5 - .equ BSD_close, 6 - .equ BSD_remove, 10 - .equ BSD_lseek, 19 - .equ BSD_sbrk, 69 - .equ BSD_readv, 120 - .equ BSD_writev, 121 - .equ BSD_rename, 128 -; Functions above 0x100 are handled by Am29000 code - .equ BSD_alloc, 0x101 - .equ BSD_free, 0x102 - .equ BSD_getpagesize, 0x103 - - .equ BSD_clock, 0x111 - -; Supported system call function numbers - HIF version 2.0 - - .equ HIF_exit, 0x01 - - .equ HIF_open, 0x11 - .equ HIF_close, 0x12 - .equ HIF_read, 0x13 - .equ HIF_write, 0x14 - .equ HIF_lseek, 0x15 - .equ HIF_remove, 0x16 - .equ HIF_rename, 0x17 - .equ HIF_ioctl, 0x18 - .equ HIF_iowait, 0x19 - .equ HIF_iostat, 0x1a - - .equ HIF_tmpnam, 0x21 - - .equ HIF_time, 0x31 - - .equ HIF_getenv, 0x41 - .equ HIF_gettz, 0x43 - - .equ HIF_sysalloc, 0x101 - .equ HIF_alloc, HIF_sysalloc ;Synonym. - .equ HIF_sysfree, 0x102 - .equ HIF_free, HIF_sysfree ;Synonym. - .equ HIF_getpsize, 0x103 - .equ HIF_getpagesize,HIF_getpsize ;Synonym. - .equ HIF_getargs, 0x104 - - .equ HIF_clock, 0x111 - .equ HIF_cycles, 0x112 - - .equ HIF_setvec, 0x121 - .equ HIF_settrap, 0x122 - .equ HIF_setim, 0x123 - - .equ HIF_query, 0x131 - - .equ HIF_signal, 0x141 - .equ HIF_sigdfl, 0x142 - .equ HIF_sigret, 0x143 - .equ HIF_sigrep, 0x144 - .equ HIF_sigskp, 0x145 - .equ HIF_sendsig, 0x146 - -;Maintain compatibility with HIF 1.0 code. - - .equ EPI_exit, HIF_exit - - .equ EPI_open, HIF_open - .equ EPI_close, HIF_close - .equ EPI_read, HIF_read - .equ EPI_write, HIF_write - .equ EPI_lseek, HIF_lseek - .equ EPI_remove, HIF_remove - .equ EPI_rename, HIF_rename - - .equ EPI_tmpnam, HIF_tmpnam - - .equ EPI_time, HIF_time - - .equ EPI_getenv, HIF_getenv - .equ EPI_gettz, HIF_gettz - .equ EPI_alloc, HIF_sysalloc - .equ EPI_free, HIF_sysfree - .equ EPI_getpagesize, HIF_getpsize - .equ EPI_getargs, HIF_getargs - - .equ EPI_clock, HIF_clock - .equ EPI_cycles, HIF_cycles - - .equ EPI_setvec, HIF_setvec - - .equ V_SYSCALL, 69 - -; System call macros -/* Now that source files have been sed'd to avoid these macros, they - are just commented out. -- gnu@cygnus.com Oct 90 - - .ifdef _BSD_OS - .equ V_SYSCALL, 66 - .else - .equ V_SYSCALL, 69 - .endif - - .macro syscall, name - .ifdef _BSD_OS - const tav, SYS_@name - .else - const tav, HIF_@name - .endif - asneq V_SYSCALL, gr1, gr1 - .endm - -; error return -; set errno to the error value in tav. -; return -1 -; - .macro returnerr -;; .extern _errno ; rather have undef'd sym than multiple def's - const tpc, _errno - consth tpc, _errno - store 0, 0, tav, tpc - jmpi lr0 - constn v0, -1 - .endm - -; package the most common case in one macro -; - .macro system, name - syscall name - jmpti tav, lr0 - returnerr - .endm - */ diff --git a/newlib/libc/sys/a29khif/systime.s b/newlib/libc/sys/a29khif/systime.s deleted file mode 100644 index 95b193360..000000000 --- a/newlib/libc/sys/a29khif/systime.s +++ /dev/null @@ -1,44 +0,0 @@ -; @(#)systime.s 1.2 90/10/14 21:57:59, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; _time.s -; time_t secs = time( time_t *secs ); -; -; NOTE - Will not work on BSD (no time sys call) -; - .file "systime.s" - .include "sys/sysmac.h" - .text - .word 0x00030000 ; Debugger tag word - .global _time -_time: - const tav,HIF_time @ asneq V_SYSCALL,gr1,gr1 - cpeq gr97, lr2, 0 - jmpti gr97, lr0 - nop - jmpi lr0 - store 0, 0, gr96, lr2 - .end diff --git a/newlib/libc/sys/a29khif/vec.s b/newlib/libc/sys/a29khif/vec.s deleted file mode 100644 index 5a7083a3c..000000000 --- a/newlib/libc/sys/a29khif/vec.s +++ /dev/null @@ -1,35 +0,0 @@ -; @(#)vec.s 1.2 90/10/14 21:58:01, AMD -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Copyright 1990 Advanced Micro Devices, Inc. -; -; This software is the property of Advanced Micro Devices, Inc (AMD) which -; specifically grants the user the right to modify, use and distribute this -; software provided this notice is not removed or altered. All other rights -; are reserved by AMD. -; -; AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS -; SOFTWARE. IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL -; DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR -; USE OF THIS SOFTWARE. -; -; So that all may benefit from your experience, please report any problems -; or suggestions about this software to the 29K Technical Support Center at -; 800-29-29-AMD (800-292-9263) in the USA, or 0800-89-1131 in the UK, or -; 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. -; -; Advanced Micro Devices, Inc. -; 29K Support Products -; Mail Stop 573 -; 5900 E. Ben White Blvd. -; Austin, TX 78741 -; 800-292-9263 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - .global V_SPILL, V_FILL - .global V_EPI_OS, V_BSD_OS - - .equ V_SPILL, 64 - .equ V_FILL, 65 - - .equ V_BSD_OS, 66 - .equ V_EPI_OS, 69 - .end |