diff options
Diffstat (limited to 'newlib/libc/sys/sysnecv850/configure')
| -rwxr-xr-x | newlib/libc/sys/sysnecv850/configure | 113 |
1 files changed, 65 insertions, 48 deletions
diff --git a/newlib/libc/sys/sysnecv850/configure b/newlib/libc/sys/sysnecv850/configure index 7944b3353..08c340c16 100755 --- a/newlib/libc/sys/sysnecv850/configure +++ b/newlib/libc/sys/sysnecv850/configure @@ -20,6 +20,10 @@ ac_help="$ac_help ac_help="$ac_help --enable-newlib-mb enable multibyte support" ac_help="$ac_help + --enable-newlib-iconv enable iconv library support" +ac_help="$ac_help + --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in" +ac_help="$ac_help --enable-newlib-multithread enable support for multiple threads" ac_help="$ac_help --enable-newlib-elix-level supply desired elix library level (1-4)" @@ -47,7 +51,6 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= -sitefile= srcdir= target=NONE verbose= @@ -162,7 +165,6 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages - --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -333,11 +335,6 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; - -site-file | --site-file | --site-fil | --site-fi | --site-f) - ac_prev=sitefile ;; - -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) - sitefile="$ac_optarg" ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -503,16 +500,12 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$sitefile"; then - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi -else - CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -584,7 +577,7 @@ ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:588: checking for a BSD compatible install" >&5 +echo "configure:581: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -637,7 +630,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:641: checking whether build environment is sane" >&5 +echo "configure:634: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -694,7 +687,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:691: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -727,12 +720,12 @@ else fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:731: checking for Cygwin environment" >&5 +echo "configure:724: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 736 "configure" +#line 729 "configure" #include "confdefs.h" int main() { @@ -743,7 +736,7 @@ int main() { return __CYGWIN__; ; return 0; } EOF -if { (eval echo configure:747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:740: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -760,19 +753,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:764: checking for mingw32 environment" >&5 +echo "configure:757: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 769 "configure" +#line 762 "configure" #include "confdefs.h" int main() { return __MINGW32__; ; return 0; } EOF -if { (eval echo configure:776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:769: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -837,6 +830,30 @@ else newlib_mb= fi +# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. +if test "${enable_newlib_iconv+set}" = set; then + enableval="$enable_newlib_iconv" + case "${enableval}" in + yes) newlib_iconv=yes ;; + no) newlib_iconv=no ;; + *) { echo "configure: error: bad value ${enableval} for newlib-iconv option" 1>&2; exit 1; } ;; + esac +else + newlib_iconv= +fi + +# Check whether --enable-newlib-builtin-converters or --disable-newlib-builtin-converters was given. +if test "${enable_newlib_builtin_converters+set}" = set; then + enableval="$enable_newlib_builtin_converters" + if test x${enableval} = x; then + { echo "configure: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" 1>&2; exit 1; } + fi + builtin_converters=${enableval} + +else + builtin_converters= +fi + # Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. if test "${enable_newlib_multithread+set}" = set; then enableval="$enable_newlib_multithread" @@ -940,7 +957,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:944: checking host system type" >&5 +echo "configure:961: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -961,7 +978,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:965: checking target system type" >&5 +echo "configure:982: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -979,7 +996,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:983: checking build system type" >&5 +echo "configure:1000: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1022,7 +1039,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:1026: checking for working aclocal" >&5 +echo "configure:1043: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1035,7 +1052,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:1039: checking for working autoconf" >&5 +echo "configure:1056: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1048,7 +1065,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:1052: checking for working automake" >&5 +echo "configure:1069: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1061,7 +1078,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:1065: checking for working autoheader" >&5 +echo "configure:1082: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1074,7 +1091,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:1078: checking for working makeinfo" >&5 +echo "configure:1095: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1099,7 +1116,7 @@ fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1103: checking for $ac_word" >&5 +echo "configure:1120: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1129,7 +1146,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1133: checking for $ac_word" >&5 +echo "configure:1150: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1178,7 +1195,7 @@ fi fi echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1182: checking whether we are using GNU C" >&5 +echo "configure:1199: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1187,7 +1204,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1208: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1202,7 +1219,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1223: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1233,7 +1250,7 @@ fi # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1237: checking for $ac_word" >&5 +echo "configure:1254: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1265,7 +1282,7 @@ fi # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1269: checking for $ac_word" >&5 +echo "configure:1286: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1297,7 +1314,7 @@ fi # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1301: checking for $ac_word" >&5 +echo "configure:1318: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1329,7 +1346,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1333: checking for $ac_word" >&5 +echo "configure:1350: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1374,7 +1391,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1378: checking for a BSD compatible install" >&5 +echo "configure:1395: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1428,7 +1445,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:1449: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -1462,7 +1479,7 @@ if false; then echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1466: checking for executable suffix" >&5 +echo "configure:1483: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1472,10 +1489,10 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *.c | *.o | *.obj) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done @@ -1782,7 +1799,7 @@ cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. |