path: root/libgloss/bfin/include/defBF50x_base.h

/*
 * The authors hereby grant permission to use, copy, modify, distribute,
 * and license this software and its documentation for any purpose, provided
 * that existing copyright notices are retained in all copies and that this
 * notice is included verbatim in any distributions. No written agreement,
 * license, or royalty fee is required for any of the authorized uses.
 * Modifications to this software may be copyrighted by their authors
 * and need not follow the licensing terms described here, provided that
 * the new terms are clearly indicated on the first page of each file where
 * they apply.
 */

/*
** defBF50x_base.h
**
** This include file contains a list of macro "defines" to enable the programmer
** to use symbolic names for the system MMRs common to the ADSP-BF50x parts
** peripherals.
**
** Copyright (C) 2009 Analog Devices Inc., All Rights Reserved.
*/

#ifndef _DEF_BF50X_H
#define _DEF_BF50X_H

#ifdef _MISRA_RULES
#pragma diag(push)
#pragma diag(suppress:misra_rule_19_7:"ADI header allows function macros.")
#endif /* _MISRA_RULES */


/* ************************************************************************************************************** */
/*                           SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF50x                            */
/* ************************************************************************************************************** */

/* Clock and System Control     (0xFFC00000 - 0xFFC000FF)                                   */
#define PLL_CTL                 0xFFC00000  /* PLL Control Register                         */
#define PLL_DIV                 0xFFC00004  /* PLL Divide Register                          */
#define VR_CTL                  0xFFC00008  /* Voltage Regulator Control Register           */
#define PLL_STAT                0xFFC0000C  /* PLL Status Register                          */
#define PLL_LOCKCNT             0xFFC00010  /* PLL Lock Count Register                      */
#define CHIPID                  0xFFC00014  /* Device ID Register */


/* System Interrupt Controller  (0xFFC00100 - 0xFFC001FF)                                   */
#define SWRST                   0xFFC00100  /* Software Reset Register                      */
#define SYSCR                   0xFFC00104  /* System Configuration Register                */

#define SIC_IMASK0              0xFFC0010C  /* Interrupt Mask Register                      */
/* legacy register name (below) provided for backwards code compatibility */
#define SIC_IMASK               (SIC_IMASK0)
#define SIC_IAR0                0xFFC00110  /* Interrupt Assignment Register 0              */
#define SIC_IAR1                0xFFC00114  /* Interrupt Assignment Register 1              */
#define SIC_IAR2                0xFFC00118  /* Interrupt Assignment Register 2              */
#define SIC_IAR3                0xFFC0011C  /* Interrupt Assignment Register 3              */
#define SIC_ISR0                0xFFC00120  /* Interrupt Status Register                    */
/* legacy register name (below) provided for backwards code compatibility */
#define SIC_ISR                 (SIC_ISR0)
#define SIC_IWR0                0xFFC00124  /* Interrupt Wakeup Register                    */
/* legacy register name (below) provided for backwards code compatibility */
#define SIC_IWR                 (SIC_IWR0)

/* SIC Additions to ADSP-BF50x  (0xFFC0014C - 0xFFC00162)                                   */
#define SIC_IMASK1              0xFFC0014C  /* Interrupt Mask register of SIC2              */
#define SIC_IAR4                0xFFC00150  /* Interrupt Assignment register4               */
#define SIC_IAR5                0xFFC00154  /* Interrupt Assignment register5               */
#define SIC_IAR6                0xFFC00158  /* Interrupt Assignment register6               */
#define SIC_ISR1                0xFFC00160  /* Interrupt Statur register                    */
#define SIC_IWR1                0xFFC00164  /* Interrupt Wakeup register                    */


/* Watchdog Timer               (0xFFC00200 - 0xFFC002FF)                                   */
#define WDOG_CTL                0xFFC00200  /* Watchdog Control Register                    */
#define WDOG_CNT                0xFFC00204  /* Watchdog Count Register                      */
#define WDOG_STAT               0xFFC00208  /* Watchdog Status Register                     */


/* UART0 Controller             (0xFFC00400 - 0xFFC004FF)                                   */
#define UART0_DLL               0xffc00400   /* Divisor Latch Low Byte                      */
#define UART0_DLH               0xffc00404   /* Divisor Latch High Byte                     */
#define UART0_GCTL              0xffc00408   /* Global Control Register                     */
#define UART0_LCR               0xffc0040c   /* Line Control Register                       */
#define UART0_MCR               0xffc00410   /* Modem Control Register                      */
#define UART0_LSR               0xffc00414   /* Line Status Register                        */
#define UART0_MSR               0xffc00418   /* Modem Status Register                       */
#define UART0_SCR               0xffc0041c   /* Scratch Register                            */
#define UART0_IER_SET           0xffc00420   /* Interrupt Enable Register Set               */
#define UART0_IER_CLEAR         0xffc00424   /* Interrupt Enable Register Clear             */
#define UART0_THR               0xffc00428   /* Transmit Hold Register                      */
#define UART0_RBR               0xffc0042c   /* Receive Buffer Register                     */

/* SPI0 Controller              (0xFFC00500 - 0xFFC005FF)                                   */
#define SPI0_CTL                0xFFC00500  /* SPI Control Register                         */
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_CTL                 (SPI0_CTL)
#define SPI0_FLG                0xFFC00504  /* SPI Flag register                            */
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_FLG                 (SPI0_FLG)
#define SPI0_STAT               0xFFC00508  /* SPI Status register                          */
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_STAT                (SPI0_STAT)
#define SPI0_TDBR               0xFFC0050C  /* SPI Transmit Data Buffer Register            */
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_TDBR                (SPI0_TDBR)
#define SPI0_RDBR               0xFFC00510  /* SPI Receive Data Buffer Register             */
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_RDBR                (SPI0_RDBR)
#define SPI0_BAUD               0xFFC00514  /* SPI Baud rate Register                       */
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_BAUD                (SPI0_BAUD)
#define SPI0_SHADOW             0xFFC00518  /* SPI_RDBR Shadow Register                     */
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_SHADOW              (SPI0_SHADOW)


/* TIMER0-7 Registers           (0xFFC00600 - 0xFFC006FF)                                   */
#define TIMER0_CONFIG           0xFFC00600  /* Timer 0 Configuration Register               */
#define TIMER0_COUNTER          0xFFC00604  /* Timer 0 Counter Register                     */
#define TIMER0_PERIOD           0xFFC00608  /* Timer 0 Period Register                      */
#define TIMER0_WIDTH            0xFFC0060C  /* Timer 0 Width Register                       */

#define TIMER1_CONFIG           0xFFC00610  /* Timer 1 Configuration Register               */
#define TIMER1_COUNTER          0xFFC00614  /* Timer 1 Counter Register                     */
#define TIMER1_PERIOD           0xFFC00618  /* Timer 1 Period Register                      */
#define TIMER1_WIDTH            0xFFC0061C  /* Timer 1 Width Register                       */

#define TIMER2_CONFIG           0xFFC00620  /* Timer 2 Configuration Register               */
#define TIMER2_COUNTER          0xFFC00624  /* Timer 2 Counter Register                     */
#define TIMER2_PERIOD           0xFFC00628  /* Timer 2 Period Register                      */
#define TIMER2_WIDTH            0xFFC0062C  /* Timer 2 Width Register                       */

#define TIMER3_CONFIG           0xFFC00630  /* Timer 3 Configuration Register               */
#define TIMER3_COUNTER          0xFFC00634  /* Timer 3 Counter Register                     */
#define TIMER3_PERIOD           0xFFC00638  /* Timer 3 Period Register                      */
#define TIMER3_WIDTH            0xFFC0063C  /* Timer 3 Width Register                       */

#define TIMER4_CONFIG           0xFFC00640  /* Timer 4 Configuration Register               */
#define TIMER4_COUNTER          0xFFC00644  /* Timer 4 Counter Register                     */
#define TIMER4_PERIOD           0xFFC00648  /* Timer 4 Period Register                      */
#define TIMER4_WIDTH            0xFFC0064C  /* Timer 4 Width Register                       */

#define TIMER5_CONFIG           0xFFC00650  /* Timer 5 Configuration Register               */
#define TIMER5_COUNTER          0xFFC00654  /* Timer 5 Counter Register                     */
#define TIMER5_PERIOD           0xFFC00658  /* Timer 5 Period Register                      */
#define TIMER5_WIDTH            0xFFC0065C  /* Timer 5 Width Register                       */

#define TIMER6_CONFIG           0xFFC00660  /* Timer 6 Configuration Register               */
#define TIMER6_COUNTER          0xFFC00664  /* Timer 6 Counter Register                     */
#define TIMER6_PERIOD           0xFFC00668  /* Timer 6 Period Register                      */
#define TIMER6_WIDTH            0xFFC0066C  /* Timer 6 Width Register                       */

#define TIMER7_CONFIG           0xFFC00670  /* Timer 7 Configuration Register               */
#define TIMER7_COUNTER          0xFFC00674  /* Timer 7 Counter Register                     */
#define TIMER7_PERIOD           0xFFC00678  /* Timer 7 Period Register                      */
#define TIMER7_WIDTH            0xFFC0067C  /* Timer 7 Width Register                       */

#define TIMER_ENABLE            0xFFC00680  /* Timer Enable Register                        */
#define TIMER_DISABLE           0xFFC00684  /* Timer Disable Register                       */
#define TIMER_STATUS            0xFFC00688  /* Timer Status Register                        */


/* General Purpose I/O Port F   (0xFFC00700 - 0xFFC007FF)                                   */
#define PORTFIO                 0xFFC00700  /* Port F I/O Pin State Specify Register        */
#define PORTFIO_CLEAR           0xFFC00704  /* Port F I/O Peripheral Interrupt Clear Register   */
#define PORTFIO_SET             0xFFC00708  /* Port F I/O Peripheral Interrupt Set Register */
#define PORTFIO_TOGGLE          0xFFC0070C  /* Port F I/O Pin State Toggle Register         */
#define PORTFIO_MASKA           0xFFC00710  /* Port F I/O Mask State Specify Interrupt A Register   */
#define PORTFIO_MASKA_CLEAR     0xFFC00714  /* Port F I/O Mask Disable Interrupt A Register */
#define PORTFIO_MASKA_SET       0xFFC00718  /* Port F I/O Mask Enable Interrupt A Register  */
#define PORTFIO_MASKA_TOGGLE    0xFFC0071C  /* Port F I/O Mask Toggle Enable Interrupt A Register   */
#define PORTFIO_MASKB           0xFFC00720  /* Port F I/O Mask State Specify Interrupt B Register   */
#define PORTFIO_MASKB_CLEAR     0xFFC00724  /* Port F I/O Mask Disable Interrupt B Register */
#define PORTFIO_MASKB_SET       0xFFC00728  /* Port F I/O Mask Enable Interrupt B Register  */
#define PORTFIO_MASKB_TOGGLE    0xFFC0072C  /* Port F I/O Mask Toggle Enable Interrupt B Register   */
#define PORTFIO_DIR             0xFFC00730  /* Port F I/O Direction Register                */
#define PORTFIO_POLAR           0xFFC00734  /* Port F I/O Source Polarity Register          */
#define PORTFIO_EDGE            0xFFC00738  /* Port F I/O Source Sensitivity Register       */
#define PORTFIO_BOTH            0xFFC0073C  /* Port F I/O Set on BOTH Edges Register        */
#define PORTFIO_INEN            0xFFC00740  /* Port F I/O Input Enable Register             */


/* SPORT0 Controller            (0xFFC00800 - 0xFFC008FF)                                   */
#define SPORT0_TCR1             0xFFC00800  /* SPORT0 Transmit Configuration 1 Register     */
#define SPORT0_TCR2             0xFFC00804  /* SPORT0 Transmit Configuration 2 Register     */
#define SPORT0_TCLKDIV          0xFFC00808  /* SPORT0 Transmit Clock Divider                */
#define SPORT0_TFSDIV           0xFFC0080C  /* SPORT0 Transmit Frame Sync Divider           */
#define SPORT0_TX               0xFFC00810  /* SPORT0 TX Data Register                      */
#define SPORT0_RX               0xFFC00818  /* SPORT0 RX Data Register                      */
#define SPORT0_RCR1             0xFFC00820  /* SPORT0 Transmit Configuration 1 Register     */
#define SPORT0_RCR2             0xFFC00824  /* SPORT0 Transmit Configuration 2 Register     */
#define SPORT0_RCLKDIV          0xFFC00828  /* SPORT0 Receive Clock Divider                 */
#define SPORT0_RFSDIV           0xFFC0082C  /* SPORT0 Receive Frame Sync Divider            */
#define SPORT0_STAT             0xFFC00830  /* SPORT0 Status Register                       */
#define SPORT0_CHNL             0xFFC00834  /* SPORT0 Current Channel Register              */
#define SPORT0_MCMC1            0xFFC00838  /* SPORT0 Multi-Channel Configuration Register 1    */
#define SPORT0_MCMC2            0xFFC0083C  /* SPORT0 Multi-Channel Configuration Register 2    */
#define SPORT0_MTCS0            0xFFC00840  /* SPORT0 Multi-Channel Transmit Select Register 0  */
#define SPORT0_MTCS1            0xFFC00844  /* SPORT0 Multi-Channel Transmit Select Register 1  */
#define SPORT0_MTCS2            0xFFC00848  /* SPORT0 Multi-Channel Transmit Select Register 2  */
#define SPORT0_MTCS3            0xFFC0084C  /* SPORT0 Multi-Channel Transmit Select Register 3  */
#define SPORT0_MRCS0            0xFFC00850  /* SPORT0 Multi-Channel Receive Select Register 0   */
#define SPORT0_MRCS1            0xFFC00854  /* SPORT0 Multi-Channel Receive Select Register 1   */
#define SPORT0_MRCS2            0xFFC00858  /* SPORT0 Multi-Channel Receive Select Register 2   */
#define SPORT0_MRCS3            0xFFC0085C  /* SPORT0 Multi-Channel Receive Select Register 3   */


/* SPORT1 Controller            (0xFFC00900 - 0xFFC009FF)                                   */
#define SPORT1_TCR1             0xFFC00900  /* SPORT1 Transmit Configuration 1 Register     */
#define SPORT1_TCR2             0xFFC00904  /* SPORT1 Transmit Configuration 2 Register     */
#define SPORT1_TCLKDIV          0xFFC00908  /* SPORT1 Transmit Clock Divider                */
#define SPORT1_TFSDIV           0xFFC0090C  /* SPORT1 Transmit Frame Sync Divider           */
#define SPORT1_TX               0xFFC00910  /* SPORT1 TX Data Register                      */
#define SPORT1_RX               0xFFC00918  /* SPORT1 RX Data Register                      */
#define SPORT1_RCR1             0xFFC00920  /* SPORT1 Transmit Configuration 1 Register     */
#define SPORT1_RCR2             0xFFC00924  /* SPORT1 Transmit Configuration 2 Register     */
#define SPORT1_RCLKDIV          0xFFC00928  /* SPORT1 Receive Clock Divider                 */
#define SPORT1_RFSDIV           0xFFC0092C  /* SPORT1 Receive Frame Sync Divider            */
#define SPORT1_STAT             0xFFC00930  /* SPORT1 Status Register                       */
#define SPORT1_CHNL             0xFFC00934  /* SPORT1 Current Channel Register              */
#define SPORT1_MCMC1            0xFFC00938  /* SPORT1 Multi-Channel Configuration Register 1    */
#define SPORT1_MCMC2            0xFFC0093C  /* SPORT1 Multi-Channel Configuration Register 2    */
#define SPORT1_MTCS0            0xFFC00940  /* SPORT1 Multi-Channel Transmit Select Register 0  */
#define SPORT1_MTCS1            0xFFC00944  /* SPORT1 Multi-Channel Transmit Select Register 1  */
#define SPORT1_MTCS2            0xFFC00948  /* SPORT1 Multi-Channel Transmit Select Register 2  */
#define SPORT1_MTCS3            0xFFC0094C  /* SPORT1 Multi-Channel Transmit Select Register 3  */
#define SPORT1_MRCS0            0xFFC00950  /* SPORT1 Multi-Channel Receive Select Register 0   */
#define SPORT1_MRCS1            0xFFC00954  /* SPORT1 Multi-Channel Receive Select Register 1   */
#define SPORT1_MRCS2            0xFFC00958  /* SPORT1 Multi-Channel Receive Select Register 2   */
#define SPORT1_MRCS3            0xFFC0095C  /* SPORT1 Multi-Channel Receive Select Register 3   */


/* External Bus Interface Unit  (0xFFC00A00 - 0xFFC00AFF)                                   */
#define EBIU_AMGCTL             0xFFC00A00  /* Asynchronous Memory Global Control Register  */
#define EBIU_AMBCTL             0xFFC00A04  /* Asynchronous Memory Bank Control Register    */
#define EBIU_MODE               0xFFC00A20  /* Asynchronous Memory Mode Control Register    */
#define EBIU_FCTL               0xFFC00A24  /* Asynchronous Memory Parameter Control Register */

#define EBIU_AMBCTL0            (EBIU_AMBCTL)/* Asynchronous Memory Bank Control Register    */

/* DMA Traffic Control Registers    (0xFFC00B00 - 0xFFC00BFF)                               */
#define DMA_TC_PER              0xFFC00B0C  /* Traffic Control Periods Register             */
#define DMA_TC_CNT              0xFFC00B10  /* Traffic Control Current Counts Register      */

/* Alternate deprecated register names (below) provided for backwards code compatibility    */
#define DMA_TCPER               0xFFC00B0C  /* Traffic Control Periods Register             */
#define DMA_TCCNT               0xFFC00B10  /* Traffic Control Current Counts Register      */

/* DMA Controller               (0xFFC00C00 - 0xFFC00FFF)                                   */
#define DMA0_NEXT_DESC_PTR      0xFFC00C00  /* DMA Channel 0 Next Descriptor Pointer Register   */
#define DMA0_START_ADDR         0xFFC00C04  /* DMA Channel 0 Start Address Register         */
#define DMA0_CONFIG             0xFFC00C08  /* DMA Channel 0 Configuration Register         */
#define DMA0_X_COUNT            0xFFC00C10  /* DMA Channel 0 X Count Register               */
#define DMA0_X_MODIFY           0xFFC00C14  /* DMA Channel 0 X Modify Register              */
#define DMA0_Y_COUNT            0xFFC00C18  /* DMA Channel 0 Y Count Register               */
#define DMA0_Y_MODIFY           0xFFC00C1C  /* DMA Channel 0 Y Modify Register              */
#define DMA0_CURR_DESC_PTR      0xFFC00C20  /* DMA Channel 0 Current Descriptor Pointer Register    */
#define DMA0_CURR_ADDR          0xFFC00C24  /* DMA Channel 0 Current Address Register       */
#define DMA0_IRQ_STATUS         0xFFC00C28  /* DMA Channel 0 Interrupt/Status Register      */
#define DMA0_PERIPHERAL_MAP     0xFFC00C2C  /* DMA Channel 0 Peripheral Map Register        */
#define DMA0_CURR_X_COUNT       0xFFC00C30  /* DMA Channel 0 Current X Count Register       */
#define DMA0_CURR_Y_COUNT       0xFFC00C38  /* DMA Channel 0 Current Y Count Register       */

#define DMA1_NEXT_DESC_PTR      0xFFC00C40  /* DMA Channel 1 Next Descriptor Pointer Register   */
#define DMA1_START_ADDR         0xFFC00C44  /* DMA Channel 1 Start Address Register         */
#define DMA1_CONFIG             0xFFC00C48  /* DMA Channel 1 Configuration Register         */
#define DMA1_X_COUNT            0xFFC00C50  /* DMA Channel 1 X Count Register               */
#define DMA1_X_MODIFY           0xFFC00C54  /* DMA Channel 1 X Modify Register              */
#define DMA1_Y_COUNT            0xFFC00C58  /* DMA Channel 1 Y Count Register               */
#define DMA1_Y_MODIFY           0xFFC00C5C  /* DMA Channel 1 Y Modify Register              */
#define DMA1_CURR_DESC_PTR      0xFFC00C60  /* DMA Channel 1 Current Descriptor Pointer Register    */
#define DMA1_CURR_ADDR          0xFFC00C64  /* DMA Channel 1 Current Address Register       */
#define DMA1_IRQ_STATUS         0xFFC00C68  /* DMA Channel 1 Interrupt/Status Register      */
#define DMA1_PERIPHERAL_MAP     0xFFC00C6C  /* DMA Channel 1 Peripheral Map Register        */
#define DMA1_CURR_X_COUNT       0xFFC00C70  /* DMA Channel 1 Current X Count Register       */
#define DMA1_CURR_Y_COUNT       0xFFC00C78  /* DMA Channel 1 Current Y Count Register       */

#define DMA2_NEXT_DESC_PTR      0xFFC00C80  /* DMA Channel 2 Next Descriptor Pointer Register   */
#define DMA2_START_ADDR         0xFFC00C84  /* DMA Channel 2 Start Address Register         */
#define DMA2_CONFIG             0xFFC00C88  /* DMA Channel 2 Configuration Register         */
#define DMA2_X_COUNT            0xFFC00C90  /* DMA Channel 2 X Count Register               */
#define DMA2_X_MODIFY           0xFFC00C94  /* DMA Channel 2 X Modify Register              */
#define DMA2_Y_COUNT            0xFFC00C98  /* DMA Channel 2 Y Count Register               */
#define DMA2_Y_MODIFY           0xFFC00C9C  /* DMA Channel 2 Y Modify Register              */
#define DMA2_CURR_DESC_PTR      0xFFC00CA0  /* DMA Channel 2 Current Descriptor Pointer Register    */
#define DMA2_CURR_ADDR          0xFFC00CA4  /* DMA Channel 2 Current Address Register       */
#define DMA2_IRQ_STATUS         0xFFC00CA8  /* DMA Channel 2 Interrupt/Status Register      */
#define DMA2_PERIPHERAL_MAP     0xFFC00CAC  /* DMA Channel 2 Peripheral Map Register        */
#define DMA2_CURR_X_COUNT       0xFFC00CB0  /* DMA Channel 2 Current X Count Register       */
#define DMA2_CURR_Y_COUNT       0xFFC00CB8  /* DMA Channel 2 Current Y Count Register       */

#define DMA3_NEXT_DESC_PTR      0xFFC00CC0  /* DMA Channel 3 Next Descriptor Pointer Register   */
#define DMA3_START_ADDR         0xFFC00CC4  /* DMA Channel 3 Start Address Register         */
#define DMA3_CONFIG             0xFFC00CC8  /* DMA Channel 3 Configuration Register         */
#define DMA3_X_COUNT            0xFFC00CD0  /* DMA Channel 3 X Count Register               */
#define DMA3_X_MODIFY           0xFFC00CD4  /* DMA Channel 3 X Modify Register              */
#define DMA3_Y_COUNT            0xFFC00CD8  /* DMA Channel 3 Y Count Register               */
#define DMA3_Y_MODIFY           0xFFC00CDC  /* DMA Channel 3 Y Modify Register              */
#define DMA3_CURR_DESC_PTR      0xFFC00CE0  /* DMA Channel 3 Current Descriptor Pointer Register            */
#define DMA3_CURR_ADDR          0xFFC00CE4  /* DMA Channel 3 Current Address Register       */
#define DMA3_IRQ_STATUS         0xFFC00CE8  /* DMA Channel 3 Interrupt/Status Register      */
#define DMA3_PERIPHERAL_MAP     0xFFC00CEC  /* DMA Channel 3 Peripheral Map Register        */
#define DMA3_CURR_X_COUNT       0xFFC00CF0  /* DMA Channel 3 Current X Count Register       */
#define DMA3_CURR_Y_COUNT       0xFFC00CF8  /* DMA Channel 3 Current Y Count Register       */

#define DMA4_NEXT_DESC_PTR      0xFFC00D00  /* DMA Channel 4 Next Descriptor Pointer Register   */
#define DMA4_START_ADDR         0xFFC00D04  /* DMA Channel 4 Start Address Register         */
#define DMA4_CONFIG             0xFFC00D08  /* DMA Channel 4 Configuration Register         */
#define DMA4_X_COUNT            0xFFC00D10  /* DMA Channel 4 X Count Register               */
#define DMA4_X_MODIFY           0xFFC00D14  /* DMA Channel 4 X Modify Register              */
#define DMA4_Y_COUNT            0xFFC00D18  /* DMA Channel 4 Y Count Register               */
#define DMA4_Y_MODIFY           0xFFC00D1C  /* DMA Channel 4 Y Modify Register              */
#define DMA4_CURR_DESC_PTR      0xFFC00D20  /* DMA Channel 4 Current Descriptor Pointer Register    */
#define DMA4_CURR_ADDR          0xFFC00D24  /* DMA Channel 4 Current Address Register       */
#define DMA4_IRQ_STATUS         0xFFC00D28  /* DMA Channel 4 Interrupt/Status Register      */
#define DMA4_PERIPHERAL_MAP     0xFFC00D2C  /* DMA Channel 4 Peripheral Map Register        */
#define DMA4_CURR_X_COUNT       0xFFC00D30  /* DMA Channel 4 Current X Count Register       */
#define DMA4_CURR_Y_COUNT       0xFFC00D38  /* DMA Channel 4 Current Y Count Register       */

#define DMA5_NEXT_DESC_PTR      0xFFC00D40  /* DMA Channel 5 Next Descriptor Pointer Register   */
#define DMA5_START_ADDR         0xFFC00D44  /* DMA Channel 5 Start Address Register         */
#define DMA5_CONFIG             0xFFC00D48  /* DMA Channel 5 Configuration Register         */
#define DMA5_X_COUNT            0xFFC00D50  /* DMA Channel 5 X Count Register               */
#define DMA5_X_MODIFY           0xFFC00D54  /* DMA Channel 5 X Modify Register              */
#define DMA5_Y_COUNT            0xFFC00D58  /* DMA Channel 5 Y Count Register               */
#define DMA5_Y_MODIFY           0xFFC00D5C  /* DMA Channel 5 Y Modify Register              */
#define DMA5_CURR_DESC_PTR      0xFFC00D60  /* DMA Channel 5 Current Descriptor Pointer Register    */
#define DMA5_CURR_ADDR          0xFFC00D64  /* DMA Channel 5 Current Address Register       */
#define DMA5_IRQ_STATUS         0xFFC00D68  /* DMA Channel 5 Interrupt/Status Register      */
#define DMA5_PERIPHERAL_MAP     0xFFC00D6C  /* DMA Channel 5 Peripheral Map Register        */
#define DMA5_CURR_X_COUNT       0xFFC00D70  /* DMA Channel 5 Current X Count Register       */
#define DMA5_CURR_Y_COUNT       0xFFC00D78  /* DMA Channel 5 Current Y Count Register       */

#define DMA6_NEXT_DESC_PTR      0xFFC00D80  /* DMA Channel 6 Next Descriptor Pointer Register   */
#define DMA6_START_ADDR         0xFFC00D84  /* DMA Channel 6 Start Address Register         */
#define DMA6_CONFIG             0xFFC00D88  /* DMA Channel 6 Configuration Register         */
#define DMA6_X_COUNT            0xFFC00D90  /* DMA Channel 6 X Count Register               */
#define DMA6_X_MODIFY           0xFFC00D94  /* DMA Channel 6 X Modify Register              */
#define DMA6_Y_COUNT            0xFFC00D98  /* DMA Channel 6 Y Count Register               */
#define DMA6_Y_MODIFY           0xFFC00D9C  /* DMA Channel 6 Y Modify Register              */
#define DMA6_CURR_DESC_PTR      0xFFC00DA0  /* DMA Channel 6 Current Descriptor Pointer Register    */
#define DMA6_CURR_ADDR          0xFFC00DA4  /* DMA Channel 6 Current Address Register       */
#define DMA6_IRQ_STATUS         0xFFC00DA8  /* DMA Channel 6 Interrupt/Status Register      */
#define DMA6_PERIPHERAL_MAP     0xFFC00DAC  /* DMA Channel 6 Peripheral Map Register        */
#define DMA6_CURR_X_COUNT       0xFFC00DB0  /* DMA Channel 6 Current X Count Register       */
#define DMA6_CURR_Y_COUNT       0xFFC00DB8  /* DMA Channel 6 Current Y Count Register       */

#define DMA7_NEXT_DESC_PTR      0xFFC00DC0  /* DMA Channel 7 Next Descriptor Pointer Register   */
#define DMA7_START_ADDR         0xFFC00DC4  /* DMA Channel 7 Start Address Register         */
#define DMA7_CONFIG             0xFFC00DC8  /* DMA Channel 7 Configuration Register         */
#define DMA7_X_COUNT            0xFFC00DD0  /* DMA Channel 7 X Count Register               */
#define DMA7_X_MODIFY           0xFFC00DD4  /* DMA Channel 7 X Modify Register              */
#define DMA7_Y_COUNT            0xFFC00DD8  /* DMA Channel 7 Y Count Register               */
#define DMA7_Y_MODIFY           0xFFC00DDC  /* DMA Channel 7 Y Modify Register              */
#define DMA7_CURR_DESC_PTR      0xFFC00DE0  /* DMA Channel 7 Current Descriptor Pointer Register    */
#define DMA7_CURR_ADDR          0xFFC00DE4  /* DMA Channel 7 Current Address Register       */
#define DMA7_IRQ_STATUS         0xFFC00DE8  /* DMA Channel 7 Interrupt/Status Register      */
#define DMA7_PERIPHERAL_MAP     0xFFC00DEC  /* DMA Channel 7 Peripheral Map Register        */
#define DMA7_CURR_X_COUNT       0xFFC00DF0  /* DMA Channel 7 Current X Count Register       */
#define DMA7_CURR_Y_COUNT       0xFFC00DF8  /* DMA Channel 7 Current Y Count Register       */

#define DMA8_NEXT_DESC_PTR      0xFFC00E00  /* DMA Channel 8 Next Descriptor Pointer Register   */
#define DMA8_START_ADDR         0xFFC00E04  /* DMA Channel 8 Start Address Register         */
#define DMA8_CONFIG             0xFFC00E08  /* DMA Channel 8 Configuration Register         */
#define DMA8_X_COUNT            0xFFC00E10  /* DMA Channel 8 X Count Register               */
#define DMA8_X_MODIFY           0xFFC00E14  /* DMA Channel 8 X Modify Register              */
#define DMA8_Y_COUNT            0xFFC00E18  /* DMA Channel 8 Y Count Register               */
#define DMA8_Y_MODIFY           0xFFC00E1C  /* DMA Channel 8 Y Modify Register              */
#define DMA8_CURR_DESC_PTR      0xFFC00E20  /* DMA Channel 8 Current Descriptor Pointer Register    */
#define DMA8_CURR_ADDR          0xFFC00E24  /* DMA Channel 8 Current Address Register       */
#define DMA8_IRQ_STATUS         0xFFC00E28  /* DMA Channel 8 Interrupt/Status Register      */
#define DMA8_PERIPHERAL_MAP     0xFFC00E2C  /* DMA Channel 8 Peripheral Map Register        */
#define DMA8_CURR_X_COUNT       0xFFC00E30  /* DMA Channel 8 Current X Count Register       */
#define DMA8_CURR_Y_COUNT       0xFFC00E38  /* DMA Channel 8 Current Y Count Register       */

#define DMA9_NEXT_DESC_PTR      0xFFC00E40  /* DMA Channel 9 Next Descriptor Pointer Register   */
#define DMA9_START_ADDR         0xFFC00E44  /* DMA Channel 9 Start Address Register         */
#define DMA9_CONFIG             0xFFC00E48  /* DMA Channel 9 Configuration Register         */
#define DMA9_X_COUNT            0xFFC00E50  /* DMA Channel 9 X Count Register               */
#define DMA9_X_MODIFY           0xFFC00E54  /* DMA Channel 9 X Modify Register              */
#define DMA9_Y_COUNT            0xFFC00E58  /* DMA Channel 9 Y Count Register               */
#define DMA9_Y_MODIFY           0xFFC00E5C  /* DMA Channel 9 Y Modify Register              */
#define DMA9_CURR_DESC_PTR      0xFFC00E60  /* DMA Channel 9 Current Descriptor Pointer Register    */
#define DMA9_CURR_ADDR          0xFFC00E64  /* DMA Channel 9 Current Address Register       */
#define DMA9_IRQ_STATUS         0xFFC00E68  /* DMA Channel 9 Interrupt/Status Register      */
#define DMA9_PERIPHERAL_MAP     0xFFC00E6C  /* DMA Channel 9 Peripheral Map Register        */
#define DMA9_CURR_X_COUNT       0xFFC00E70  /* DMA Channel 9 Current X Count Register       */
#define DMA9_CURR_Y_COUNT       0xFFC00E78  /* DMA Channel 9 Current Y Count Register       */

#define DMA10_NEXT_DESC_PTR     0xFFC00E80  /* DMA Channel 10 Next Descriptor Pointer Register  */
#define DMA10_START_ADDR        0xFFC00E84  /* DMA Channel 10 Start Address Register        */
#define DMA10_CONFIG            0xFFC00E88  /* DMA Channel 10 Configuration Register        */
#define DMA10_X_COUNT           0xFFC00E90  /* DMA Channel 10 X Count Register              */
#define DMA10_X_MODIFY          0xFFC00E94  /* DMA Channel 10 X Modify Register             */
#define DMA10_Y_COUNT           0xFFC00E98  /* DMA Channel 10 Y Count Register              */
#define DMA10_Y_MODIFY          0xFFC00E9C  /* DMA Channel 10 Y Modify Register             */
#define DMA10_CURR_DESC_PTR     0xFFC00EA0  /* DMA Channel 10 Current Descriptor Pointer Register   */
#define DMA10_CURR_ADDR         0xFFC00EA4  /* DMA Channel 10 Current Address Register      */
#define DMA10_IRQ_STATUS        0xFFC00EA8  /* DMA Channel 10 Interrupt/Status Register     */
#define DMA10_PERIPHERAL_MAP    0xFFC00EAC  /* DMA Channel 10 Peripheral Map Register       */
#define DMA10_CURR_X_COUNT      0xFFC00EB0  /* DMA Channel 10 Current X Count Register      */
#define DMA10_CURR_Y_COUNT      0xFFC00EB8  /* DMA Channel 10 Current Y Count Register      */

#define DMA11_NEXT_DESC_PTR     0xFFC00EC0  /* DMA Channel 11 Next Descriptor Pointer Register  */
#define DMA11_START_ADDR        0xFFC00EC4  /* DMA Channel 11 Start Address Register        */
#define DMA11_CONFIG            0xFFC00EC8  /* DMA Channel 11 Configuration Register        */
#define DMA11_X_COUNT           0xFFC00ED0  /* DMA Channel 11 X Count Register              */
#define DMA11_X_MODIFY          0xFFC00ED4  /* DMA Channel 11 X Modify Register             */
#define DMA11_Y_COUNT           0xFFC00ED8  /* DMA Channel 11 Y Count Register              */
#define DMA11_Y_MODIFY          0xFFC00EDC  /* DMA Channel 11 Y Modify Register             */
#define DMA11_CURR_DESC_PTR     0xFFC00EE0  /* DMA Channel 11 Current Descriptor Pointer Register   */
#define DMA11_CURR_ADDR         0xFFC00EE4  /* DMA Channel 11 Current Address Register      */
#define DMA11_IRQ_STATUS        0xFFC00EE8  /* DMA Channel 11 Interrupt/Status Register     */
#define DMA11_PERIPHERAL_MAP    0xFFC00EEC  /* DMA Channel 11 Peripheral Map Register       */
#define DMA11_CURR_X_COUNT      0xFFC00EF0  /* DMA Channel 11 Current X Count Register      */
#define DMA11_CURR_Y_COUNT      0xFFC00EF8  /* DMA Channel 11 Current Y Count Register      */

#define MDMA_D0_NEXT_DESC_PTR   0xFFC00F00  /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
#define MDMA_D0_START_ADDR      0xFFC00F04  /* MemDMA Stream 0 Destination Start Address Register       */
#define MDMA_D0_CONFIG          0xFFC00F08  /* MemDMA Stream 0 Destination Configuration Register       */
#define MDMA_D0_X_COUNT         0xFFC00F10  /* MemDMA Stream 0 Destination X Count Register             */
#define MDMA_D0_X_MODIFY        0xFFC00F14  /* MemDMA Stream 0 Destination X Modify Register            */
#define MDMA_D0_Y_COUNT         0xFFC00F18  /* MemDMA Stream 0 Destination Y Count Register             */
#define MDMA_D0_Y_MODIFY        0xFFC00F1C  /* MemDMA Stream 0 Destination Y Modify Register            */
#define MDMA_D0_CURR_DESC_PTR   0xFFC00F20  /* MemDMA Stream 0 Destination Current Descriptor Pointer Register  */
#define MDMA_D0_CURR_ADDR       0xFFC00F24  /* MemDMA Stream 0 Destination Current Address Register     */
#define MDMA_D0_IRQ_STATUS      0xFFC00F28  /* MemDMA Stream 0 Destination Interrupt/Status Register    */
#define MDMA_D0_PERIPHERAL_MAP  0xFFC00F2C  /* MemDMA Stream 0 Destination Peripheral Map Register      */
#define MDMA_D0_CURR_X_COUNT    0xFFC00F30  /* MemDMA Stream 0 Destination Current X Count Register     */
#define MDMA_D0_CURR_Y_COUNT    0xFFC00F38  /* MemDMA Stream 0 Destination Current Y Count Register     */

#define MDMA_S0_NEXT_DESC_PTR   0xFFC00F40  /* MemDMA Stream 0 Source Next Descriptor Pointer Register  */
#define MDMA_S0_START_ADDR      0xFFC00F44  /* MemDMA Stream 0 Source Start Address Register            */
#define MDMA_S0_CONFIG          0xFFC00F48  /* MemDMA Stream 0 Source Configuration Register            */
#define MDMA_S0_X_COUNT         0xFFC00F50  /* MemDMA Stream 0 Source X Count Register                  */
#define MDMA_S0_X_MODIFY        0xFFC00F54  /* MemDMA Stream 0 Source X Modify Register                 */
#define MDMA_S0_Y_COUNT         0xFFC00F58  /* MemDMA Stream 0 Source Y Count Register                  */
#define MDMA_S0_Y_MODIFY        0xFFC00F5C  /* MemDMA Stream 0 Source Y Modify Register                 */
#define MDMA_S0_CURR_DESC_PTR   0xFFC00F60  /* MemDMA Stream 0 Source Current Descriptor Pointer Register   */
#define MDMA_S0_CURR_ADDR       0xFFC00F64  /* MemDMA Stream 0 Source Current Address Register          */
#define MDMA_S0_IRQ_STATUS      0xFFC00F68  /* MemDMA Stream 0 Source Interrupt/Status Register         */
#define MDMA_S0_PERIPHERAL_MAP  0xFFC00F6C  /* MemDMA Stream 0 Source Peripheral Map Register           */
#define MDMA_S0_CURR_X_COUNT    0xFFC00F70  /* MemDMA Stream 0 Source Current X Count Register          */
#define MDMA_S0_CURR_Y_COUNT    0xFFC00F78  /* MemDMA Stream 0 Source Current Y Count Register          */

#define MDMA_D1_NEXT_DESC_PTR   0xFFC00F80  /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
#define MDMA_D1_START_ADDR      0xFFC00F84  /* MemDMA Stream 1 Destination Start Address Register       */
#define MDMA_D1_CONFIG          0xFFC00F88  /* MemDMA Stream 1 Destination Configuration Register       */
#define MDMA_D1_X_COUNT         0xFFC00F90  /* MemDMA Stream 1 Destination X Count Register             */
#define MDMA_D1_X_MODIFY        0xFFC00F94  /* MemDMA Stream 1 Destination X Modify Register            */
#define MDMA_D1_Y_COUNT         0xFFC00F98  /* MemDMA Stream 1 Destination Y Count Register             */
#define MDMA_D1_Y_MODIFY        0xFFC00F9C  /* MemDMA Stream 1 Destination Y Modify Register            */
#define MDMA_D1_CURR_DESC_PTR   0xFFC00FA0  /* MemDMA Stream 1 Destination Current Descriptor Pointer Register  */
#define MDMA_D1_CURR_ADDR       0xFFC00FA4  /* MemDMA Stream 1 Destination Current Address Register     */
#define MDMA_D1_IRQ_STATUS      0xFFC00FA8  /* MemDMA Stream 1 Destination Interrupt/Status Register    */
#define MDMA_D1_PERIPHERAL_MAP  0xFFC00FAC  /* MemDMA Stream 1 Destination Peripheral Map Register      */
#define MDMA_D1_CURR_X_COUNT    0xFFC00FB0  /* MemDMA Stream 1 Destination Current X Count Register     */
#define MDMA_D1_CURR_Y_COUNT    0xFFC00FB8  /* MemDMA Stream 1 Destination Current Y Count Register     */

#define MDMA_S1_NEXT_DESC_PTR   0xFFC00FC0  /* MemDMA Stream 1 Source Next Descriptor Pointer Register  */
#define MDMA_S1_START_ADDR      0xFFC00FC4  /* MemDMA Stream 1 Source Start Address Register            */
#define MDMA_S1_CONFIG          0xFFC00FC8  /* MemDMA Stream 1 Source Configuration Register            */
#define MDMA_S1_X_COUNT         0xFFC00FD0  /* MemDMA Stream 1 Source X Count Register                  */
#define MDMA_S1_X_MODIFY        0xFFC00FD4  /* MemDMA Stream 1 Source X Modify Register                 */
#define MDMA_S1_Y_COUNT         0xFFC00FD8  /* MemDMA Stream 1 Source Y Count Register                  */
#define MDMA_S1_Y_MODIFY        0xFFC00FDC  /* MemDMA Stream 1 Source Y Modify Register                 */
#define MDMA_S1_CURR_DESC_PTR   0xFFC00FE0  /* MemDMA Stream 1 Source Current Descriptor Pointer Register   */
#define MDMA_S1_CURR_ADDR       0xFFC00FE4  /* MemDMA Stream 1 Source Current Address Register          */
#define MDMA_S1_IRQ_STATUS      0xFFC00FE8  /* MemDMA Stream 1 Source Interrupt/Status Register         */
#define MDMA_S1_PERIPHERAL_MAP  0xFFC00FEC  /* MemDMA Stream 1 Source Peripheral Map Register           */
#define MDMA_S1_CURR_X_COUNT    0xFFC00FF0  /* MemDMA Stream 1 Source Current X Count Register          */
#define MDMA_S1_CURR_Y_COUNT    0xFFC00FF8  /* MemDMA Stream 1 Source Current Y Count Register          */


/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)                                  */
#define PPI_CONTROL             0xFFC01000  /* PPI Control Register                         */
#define PPI_STATUS              0xFFC01004  /* PPI Status Register                          */
#define PPI_COUNT               0xFFC01008  /* PPI Transfer Count Register                  */
#define PPI_DELAY               0xFFC0100C  /* PPI Delay Count Register                     */
#define PPI_FRAME               0xFFC01010  /* PPI Frame Length Register                    */


/* Two-Wire Interface           (0xFFC01400 - 0xFFC014FF)                                   */
#define TWI_CLKDIV              0xFFC01400  /* Serial Clock Divider Register                */
#define TWI_CONTROL             0xFFC01404  /* TWI Control Register                         */
#define TWI_SLAVE_CTL           0xFFC01408  /* Slave Mode Control Register                  */
#define TWI_SLAVE_STAT          0xFFC0140C  /* Slave Mode Status Register                   */
#define TWI_SLAVE_ADDR          0xFFC01410  /* Slave Mode Address Register                  */
#define TWI_MASTER_CTL          0xFFC01414  /* Master Mode Control Register                 */
#define TWI_MASTER_STAT         0xFFC01418  /* Master Mode Status Register                  */
#define TWI_MASTER_ADDR         0xFFC0141C  /* Master Mode Address Register                 */
#define TWI_INT_STAT            0xFFC01420  /* TWI Interrupt Status Register                */
#define TWI_INT_MASK            0xFFC01424  /* TWI Master Interrupt Mask Register           */
#define TWI_FIFO_CTL            0xFFC01428  /* FIFO Control Register                        */
#define TWI_FIFO_STAT           0xFFC0142C  /* FIFO Status Register                         */
#define TWI_XMT_DATA8           0xFFC01480  /* FIFO Transmit Data Single Byte Register      */
#define TWI_XMT_DATA16          0xFFC01484  /* FIFO Transmit Data Double Byte Register      */
#define TWI_RCV_DATA8           0xFFC01488  /* FIFO Receive Data Single Byte Register       */
#define TWI_RCV_DATA16          0xFFC0148C  /* FIFO Receive Data Double Byte Register       */


/* General Purpose I/O Port G   (0xFFC01500 - 0xFFC015FF)                                   */
#define PORTGIO                 0xFFC01500  /* Port G I/O Pin State Specify Register        */
#define PORTGIO_CLEAR           0xFFC01504  /* Port G I/O Peripheral Interrupt Clear Register   */
#define PORTGIO_SET             0xFFC01508  /* Port G I/O Peripheral Interrupt Set Register */
#define PORTGIO_TOGGLE          0xFFC0150C  /* Port G I/O Pin State Toggle Register         */
#define PORTGIO_MASKA           0xFFC01510  /* Port G I/O Mask State Specify Interrupt A Register   */
#define PORTGIO_MASKA_CLEAR     0xFFC01514  /* Port G I/O Mask Disable Interrupt A Register */
#define PORTGIO_MASKA_SET       0xFFC01518  /* Port G I/O Mask Enable Interrupt A Register  */
#define PORTGIO_MASKA_TOGGLE    0xFFC0151C  /* Port G I/O Mask Toggle Enable Interrupt A Register   */
#define PORTGIO_MASKB           0xFFC01520  /* Port G I/O Mask State Specify Interrupt B Register   */
#define PORTGIO_MASKB_CLEAR     0xFFC01524  /* Port G I/O Mask Disable Interrupt B Register */
#define PORTGIO_MASKB_SET       0xFFC01528  /* Port G I/O Mask Enable Interrupt B Register  */
#define PORTGIO_MASKB_TOGGLE    0xFFC0152C  /* Port G I/O Mask Toggle Enable Interrupt B Register   */
#define PORTGIO_DIR             0xFFC01530  /* Port G I/O Direction Register                */
#define PORTGIO_POLAR           0xFFC01534  /* Port G I/O Source Polarity Register          */
#define PORTGIO_EDGE            0xFFC01538  /* Port G I/O Source Sensitivity Register       */
#define PORTGIO_BOTH            0xFFC0153C  /* Port G I/O Set on BOTH Edges Register        */
#define PORTGIO_INEN            0xFFC01540  /* Port G I/O Input Enable Register             */


/* General Purpose I/O Port H   (0xFFC01700 - 0xFFC017FF)                                   */
#define PORTHIO                 0xFFC01700  /* Port H I/O Pin State Specify Register        */
#define PORTHIO_CLEAR           0xFFC01704  /* Port H I/O Peripheral Interrupt Clear Register   */
#define PORTHIO_SET             0xFFC01708  /* Port H I/O Peripheral Interrupt Set Register */
#define PORTHIO_TOGGLE          0xFFC0170C  /* Port H I/O Pin State Toggle Register         */
#define PORTHIO_MASKA           0xFFC01710  /* Port H I/O Mask State Specify Interrupt A Register   */
#define PORTHIO_MASKA_CLEAR     0xFFC01714  /* Port H I/O Mask Disable Interrupt A Register */
#define PORTHIO_MASKA_SET       0xFFC01718  /* Port H I/O Mask Enable Interrupt A Register  */
#define PORTHIO_MASKA_TOGGLE    0xFFC0171C  /* Port H I/O Mask Toggle Enable Interrupt A Register   */
#define PORTHIO_MASKB           0xFFC01720  /* Port H I/O Mask State Specify Interrupt B Register   */
#define PORTHIO_MASKB_CLEAR     0xFFC01724  /* Port H I/O Mask Disable Interrupt B Register */
#define PORTHIO_MASKB_SET       0xFFC01728  /* Port H I/O Mask Enable Interrupt B Register  */
#define PORTHIO_MASKB_TOGGLE    0xFFC0172C  /* Port H I/O Mask Toggle Enable Interrupt B Register   */
#define PORTHIO_DIR             0xFFC01730  /* Port H I/O Direction Register                */
#define PORTHIO_POLAR           0xFFC01734  /* Port H I/O Source Polarity Register          */
#define PORTHIO_EDGE            0xFFC01738  /* Port H I/O Source Sensitivity Register       */
#define PORTHIO_BOTH            0xFFC0173C  /* Port H I/O Set on BOTH Edges Register        */
#define PORTHIO_INEN            0xFFC01740  /* Port H I/O Input Enable Register             */


/* UART1 Controller             (0xFFC02000 - 0xFFC020FF)                                   */
#define UART1_DLL               0xffc02000   /* Divisor Latch Low Byte                      */
#define UART1_DLH               0xffc02004   /* Divisor Latch High Byte                     */
#define UART1_GCTL              0xffc02008   /* Global Control Register                     */
#define UART1_LCR               0xffc0200c   /* Line Control Register                       */
#define UART1_MCR               0xffc02010   /* Modem Control Register                      */
#define UART1_LSR               0xffc02014   /* Line Status Register                        */
#define UART1_MSR               0xffc02018   /* Modem Status Register                       */
#define UART1_SCR               0xffc0201c   /* Scratch Register                            */
#define UART1_IER_SET           0xffc02020   /* Interrupt Enable Register Set               */
#define UART1_IER_CLEAR         0xffc02024   /* Interrupt Enable Register Clear             */
#define UART1_THR               0xffc02028   /* Transmit Hold Register                      */
#define UART1_RBR               0xffc0202c   /* Receive Buffer Register                     */


/* CAN Controller       (0xFFC02A00 - 0xFFC02FFF)                                           */
/* For Mailboxes 0-15                                                                       */
#define CAN_MC1             0xFFC02A00  /* Mailbox config reg 1                             */
#define CAN_MD1             0xFFC02A04  /* Mailbox direction reg 1                          */
#define CAN_TRS1            0xFFC02A08  /* Transmit Request Set reg 1                       */
#define CAN_TRR1            0xFFC02A0C  /* Transmit Request Reset reg 1                     */
#define CAN_TA1             0xFFC02A10  /* Transmit Acknowledge reg 1                       */
#define CAN_AA1             0xFFC02A14  /* Transmit Abort Acknowledge reg 1                 */
#define CAN_RMP1            0xFFC02A18  /* Receive Message Pending reg 1                    */
#define CAN_RML1            0xFFC02A1C  /* Receive Message Lost reg 1                       */
#define CAN_MBTIF1          0xFFC02A20  /* Mailbox Transmit Interrupt Flag reg 1            */
#define CAN_MBRIF1          0xFFC02A24  /* Mailbox Receive  Interrupt Flag reg 1            */
#define CAN_MBIM1           0xFFC02A28  /* Mailbox Interrupt Mask reg 1                     */
#define CAN_RFH1            0xFFC02A2C  /* Remote Frame Handling reg 1                      */
#define CAN_OPSS1           0xFFC02A30  /* Overwrite Protection Single Shot Xmission reg 1  */

/* For Mailboxes 16-31                                                                      */
#define CAN_MC2             0xFFC02A40  /* Mailbox config reg 2                             */
#define CAN_MD2             0xFFC02A44  /* Mailbox direction reg 2                          */
#define CAN_TRS2            0xFFC02A48  /* Transmit Request Set reg 2                       */
#define CAN_TRR2            0xFFC02A4C  /* Transmit Request Reset reg 2                     */
#define CAN_TA2             0xFFC02A50  /* Transmit Acknowledge reg 2                       */
#define CAN_AA2             0xFFC02A54  /* Transmit Abort Acknowledge reg 2                 */
#define CAN_RMP2            0xFFC02A58  /* Receive Message Pending reg 2                    */
#define CAN_RML2            0xFFC02A5C  /* Receive Message Lost reg 2                       */
#define CAN_MBTIF2          0xFFC02A60  /* Mailbox Transmit Interrupt Flag reg 2            */
#define CAN_MBRIF2          0xFFC02A64  /* Mailbox Receive  Interrupt Flag reg 2            */
#define CAN_MBIM2           0xFFC02A68  /* Mailbox Interrupt Mask reg 2                     */
#define CAN_RFH2            0xFFC02A6C  /* Remote Frame Handling reg 2                      */
#define CAN_OPSS2           0xFFC02A70  /* Overwrite Protection Single Shot Xmission reg 2  */

#define CAN_CLOCK           0xFFC02A80  /* Bit Timing Configuration register 0              */
#define CAN_TIMING          0xFFC02A84  /* Bit Timing Configuration register 1              */

#define CAN_DEBUG           0xFFC02A88  /* Debug Register                                   */
/* the following is for backwards compatibility */
#define CAN_CNF             (CAN_DEBUG )

#define CAN_STATUS          0xFFC02A8C  /* Global Status Register                           */
#define CAN_CEC             0xFFC02A90  /* Error Counter Register                           */
#define CAN_GIS             0xFFC02A94  /* Global Interrupt Status Register                 */
#define CAN_GIM             0xFFC02A98  /* Global Interrupt Mask Register                   */
#define CAN_GIF             0xFFC02A9C  /* Global Interrupt Flag Register                   */
#define CAN_CONTROL         0xFFC02AA0  /* Master Control Register                          */
#define CAN_INTR            0xFFC02AA4  /* Interrupt Pending Register                       */
#define CAN_MBTD            0xFFC02AAC  /* Mailbox Temporary Disable Feature                */
#define CAN_EWR             0xFFC02AB0  /* Programmable Warning Level                       */
#define CAN_ESR             0xFFC02AB4  /* Error Status Register                            */
#define CAN_UCCNT           0xFFC02AC4  /* Universal Counter                                */
#define CAN_UCRC            0xFFC02AC8  /* Universal Counter Reload/Capture Register    */
#define CAN_UCCNF           0xFFC02ACC  /* Universal Counter Configuration Register         */

/* Mailbox Acceptance Masks                                                 */
#define CAN_AM00L           0xFFC02B00  /* Mailbox 0 Low Acceptance Mask    */
#define CAN_AM00H           0xFFC02B04  /* Mailbox 0 High Acceptance Mask   */
#define CAN_AM01L           0xFFC02B08  /* Mailbox 1 Low Acceptance Mask    */
#define CAN_AM01H           0xFFC02B0C  /* Mailbox 1 High Acceptance Mask   */
#define CAN_AM02L           0xFFC02B10  /* Mailbox 2 Low Acceptance Mask    */
#define CAN_AM02H           0xFFC02B14  /* Mailbox 2 High Acceptance Mask   */
#define CAN_AM03L           0xFFC02B18  /* Mailbox 3 Low Acceptance Mask    */
#define CAN_AM03H           0xFFC02B1C  /* Mailbox 3 High Acceptance Mask   */
#define CAN_AM04L           0xFFC02B20  /* Mailbox 4 Low Acceptance Mask    */
#define CAN_AM04H           0xFFC02B24  /* Mailbox 4 High Acceptance Mask   */
#define CAN_AM05L           0xFFC02B28  /* Mailbox 5 Low Acceptance Mask    */
#define CAN_AM05H           0xFFC02B2C  /* Mailbox 5 High Acceptance Mask   */
#define CAN_AM06L           0xFFC02B30  /* Mailbox 6 Low Acceptance Mask    */
#define CAN_AM06H           0xFFC02B34  /* Mailbox 6 High Acceptance Mask   */
#define CAN_AM07L           0xFFC02B38  /* Mailbox 7 Low Acceptance Mask    */
#define CAN_AM07H           0xFFC02B3C  /* Mailbox 7 High Acceptance Mask   */
#define CAN_AM08L           0xFFC02B40  /* Mailbox 8 Low Acceptance Mask    */
#define CAN_AM08H           0xFFC02B44  /* Mailbox 8 High Acceptance Mask   */
#define CAN_AM09L           0xFFC02B48  /* Mailbox 9 Low Acceptance Mask    */
#define CAN_AM09H           0xFFC02B4C  /* Mailbox 9 High Acceptance Mask   */
#define CAN_AM10L           0xFFC02B50  /* Mailbox 10 Low Acceptance Mask   */
#define CAN_AM10H           0xFFC02B54  /* Mailbox 10 High Acceptance Mask  */
#define CAN_AM11L           0xFFC02B58  /* Mailbox 11 Low Acceptance Mask   */
#define CAN_AM11H           0xFFC02B5C  /* Mailbox 11 High Acceptance Mask  */
#define CAN_AM12L           0xFFC02B60  /* Mailbox 12 Low Acceptance Mask   */
#define CAN_AM12H           0xFFC02B64  /* Mailbox 12 High Acceptance Mask  */
#define CAN_AM13L           0xFFC02B68  /* Mailbox 13 Low Acceptance Mask   */
#define CAN_AM13H           0xFFC02B6C  /* Mailbox 13 High Acceptance Mask  */
#define CAN_AM14L           0xFFC02B70  /* Mailbox 14 Low Acceptance Mask   */
#define CAN_AM14H           0xFFC02B74  /* Mailbox 14 High Acceptance Mask  */
#define CAN_AM15L           0xFFC02B78  /* Mailbox 15 Low Acceptance Mask   */
#define CAN_AM15H           0xFFC02B7C  /* Mailbox 15 High Acceptance Mask  */

#define CAN_AM16L           0xFFC02B80  /* Mailbox 16 Low Acceptance Mask   */
#define CAN_AM16H           0xFFC02B84  /* Mailbox 16 High Acceptance Mask  */
#define CAN_AM17L           0xFFC02B88  /* Mailbox 17 Low Acceptance Mask   */
#define CAN_AM17H           0xFFC02B8C  /* Mailbox 17 High Acceptance Mask  */
#define CAN_AM18L           0xFFC02B90  /* Mailbox 18 Low Acceptance Mask   */
#define CAN_AM18H           0xFFC02B94  /* Mailbox 18 High Acceptance Mask  */
#define CAN_AM19L           0xFFC02B98  /* Mailbox 19 Low Acceptance Mask   */
#define CAN_AM19H           0xFFC02B9C  /* Mailbox 19 High Acceptance Mask  */
#define CAN_AM20L           0xFFC02BA0  /* Mailbox 20 Low Acceptance Mask   */
#define CAN_AM20H           0xFFC02BA4  /* Mailbox 20 High Acceptance Mask  */
#define CAN_AM21L           0xFFC02BA8  /* Mailbox 21 Low Acceptance Mask   */
#define CAN_AM21H           0xFFC02BAC  /* Mailbox 21 High Acceptance Mask  */
#define CAN_AM22L           0xFFC02BB0  /* Mailbox 22 Low Acceptance Mask   */
#define CAN_AM22H           0xFFC02BB4  /* Mailbox 22 High Acceptance Mask  */
#define CAN_AM23L           0xFFC02BB8  /* Mailbox 23 Low Acceptance Mask   */
#define CAN_AM23H           0xFFC02BBC  /* Mailbox 23 High Acceptance Mask  */
#define CAN_AM24L           0xFFC02BC0  /* Mailbox 24 Low Acceptance Mask   */
#define CAN_AM24H           0xFFC02BC4  /* Mailbox 24 High Acceptance Mask  */
#define CAN_AM25L           0xFFC02BC8  /* Mailbox 25 Low Acceptance Mask   */
#define CAN_AM25H           0xFFC02BCC  /* Mailbox 25 High Acceptance Mask  */
#define CAN_AM26L           0xFFC02BD0  /* Mailbox 26 Low Acceptance Mask   */
#define CAN_AM26H           0xFFC02BD4  /* Mailbox 26 High Acceptance Mask  */
#define CAN_AM27L           0xFFC02BD8  /* Mailbox 27 Low Acceptance Mask   */
#define CAN_AM27H           0xFFC02BDC  /* Mailbox 27 High Acceptance Mask  */
#define CAN_AM28L           0xFFC02BE0  /* Mailbox 28 Low Acceptance Mask   */
#define CAN_AM28H           0xFFC02BE4  /* Mailbox 28 High Acceptance Mask  */
#define CAN_AM29L           0xFFC02BE8  /* Mailbox 29 Low Acceptance Mask   */
#define CAN_AM29H           0xFFC02BEC  /* Mailbox 29 High Acceptance Mask  */
#define CAN_AM30L           0xFFC02BF0  /* Mailbox 30 Low Acceptance Mask   */
#define CAN_AM30H           0xFFC02BF4  /* Mailbox 30 High Acceptance Mask  */
#define CAN_AM31L           0xFFC02BF8  /* Mailbox 31 Low Acceptance Mask   */
#define CAN_AM31H           0xFFC02BFC  /* Mailbox 31 High Acceptance Mask  */

/* CAN Acceptance Mask Macros               */
#define CAN_AM_L(x)         (CAN_AM00L+((x)*0x8))
#define CAN_AM_H(x)         (CAN_AM00H+((x)*0x8))

/* Mailbox Registers                                                                */
#define CAN_MB00_DATA0      0xFFC02C00  /* Mailbox 0 Data Word 0 [15:0] Register    */
#define CAN_MB00_DATA1      0xFFC02C04  /* Mailbox 0 Data Word 1 [31:16] Register   */
#define CAN_MB00_DATA2      0xFFC02C08  /* Mailbox 0 Data Word 2 [47:32] Register   */
#define CAN_MB00_DATA3      0xFFC02C0C  /* Mailbox 0 Data Word 3 [63:48] Register   */
#define CAN_MB00_LENGTH     0xFFC02C10  /* Mailbox 0 Data Length Code Register      */
#define CAN_MB00_TIMESTAMP  0xFFC02C14  /* Mailbox 0 Time Stamp Value Register      */
#define CAN_MB00_ID0        0xFFC02C18  /* Mailbox 0 Identifier Low Register        */
#define CAN_MB00_ID1        0xFFC02C1C  /* Mailbox 0 Identifier High Register       */

#define CAN_MB01_DATA0      0xFFC02C20  /* Mailbox 1 Data Word 0 [15:0] Register    */
#define CAN_MB01_DATA1      0xFFC02C24  /* Mailbox 1 Data Word 1 [31:16] Register   */
#define CAN_MB01_DATA2      0xFFC02C28  /* Mailbox 1 Data Word 2 [47:32] Register   */
#define CAN_MB01_DATA3      0xFFC02C2C  /* Mailbox 1 Data Word 3 [63:48] Register   */
#define CAN_MB01_LENGTH     0xFFC02C30  /* Mailbox 1 Data Length Code Register      */
#define CAN_MB01_TIMESTAMP  0xFFC02C34  /* Mailbox 1 Time Stamp Value Register      */
#define CAN_MB01_ID0        0xFFC02C38  /* Mailbox 1 Identifier Low Register        */
#define CAN_MB01_ID1        0xFFC02C3C  /* Mailbox 1 Identifier High Register       */

#define CAN_MB02_DATA0      0xFFC02C40  /* Mailbox 2 Data Word 0 [15:0] Register    */
#define CAN_MB02_DATA1      0xFFC02C44  /* Mailbox 2 Data Word 1 [31:16] Register   */
#define CAN_MB02_DATA2      0xFFC02C48  /* Mailbox 2 Data Word 2 [47:32] Register   */
#define CAN_MB02_DATA3      0xFFC02C4C  /* Mailbox 2 Data Word 3 [63:48] Register   */
#define CAN_MB02_LENGTH     0xFFC02C50  /* Mailbox 2 Data Length Code Register      */
#define CAN_MB02_TIMESTAMP  0xFFC02C54  /* Mailbox 2 Time Stamp Value Register      */
#define CAN_MB02_ID0        0xFFC02C58  /* Mailbox 2 Identifier Low Register        */
#define CAN_MB02_ID1        0xFFC02C5C  /* Mailbox 2 Identifier High Register       */

#define CAN_MB03_DATA0      0xFFC02C60  /* Mailbox 3 Data Word 0 [15:0] Register    */
#define CAN_MB03_DATA1      0xFFC02C64  /* Mailbox 3 Data Word 1 [31:16] Register   */
#define CAN_MB03_DATA2      0xFFC02C68  /* Mailbox 3 Data Word 2 [47:32] Register   */
#define CAN_MB03_DATA3      0xFFC02C6C  /* Mailbox 3 Data Word 3 [63:48] Register   */
#define CAN_MB03_LENGTH     0xFFC02C70  /* Mailbox 3 Data Length Code Register      */
#define CAN_MB03_TIMESTAMP  0xFFC02C74  /* Mailbox 3 Time Stamp Value Register      */
#define CAN_MB03_ID0        0xFFC02C78  /* Mailbox 3 Identifier Low Register        */
#define CAN_MB03_ID1        0xFFC02C7C  /* Mailbox 3 Identifier High Register       */

#define CAN_MB04_DATA0      0xFFC02C80  /* Mailbox 4 Data Word 0 [15:0] Register    */
#define CAN_MB04_DATA1      0xFFC02C84  /* Mailbox 4 Data Word 1 [31:16] Register   */
#define CAN_MB04_DATA2      0xFFC02C88  /* Mailbox 4 Data Word 2 [47:32] Register   */
#define CAN_MB04_DATA3      0xFFC02C8C  /* Mailbox 4 Data Word 3 [63:48] Register   */
#define CAN_MB04_LENGTH     0xFFC02C90  /* Mailbox 4 Data Length Code Register      */
#define CAN_MB04_TIMESTAMP  0xFFC02C94  /* Mailbox 4 Time Stamp Value Register      */
#define CAN_MB04_ID0        0xFFC02C98  /* Mailbox 4 Identifier Low Register        */
#define CAN_MB04_ID1        0xFFC02C9C  /* Mailbox 4 Identifier High Register       */

#define CAN_MB05_DATA0      0xFFC02CA0  /* Mailbox 5 Data Word 0 [15:0] Register    */
#define CAN_MB05_DATA1      0xFFC02CA4  /* Mailbox 5 Data Word 1 [31:16] Register   */
#define CAN_MB05_DATA2      0xFFC02CA8  /* Mailbox 5 Data Word 2 [47:32] Register   */
#define CAN_MB05_DATA3      0xFFC02CAC  /* Mailbox 5 Data Word 3 [63:48] Register   */
#define CAN_MB05_LENGTH     0xFFC02CB0  /* Mailbox 5 Data Length Code Register      */
#define CAN_MB05_TIMESTAMP  0xFFC02CB4  /* Mailbox 5 Time Stamp Value Register      */
#define CAN_MB05_ID0        0xFFC02CB8  /* Mailbox 5 Identifier Low Register        */
#define CAN_MB05_ID1        0xFFC02CBC  /* Mailbox 5 Identifier High Register       */

#define CAN_MB06_DATA0      0xFFC02CC0  /* Mailbox 6 Data Word 0 [15:0] Register    */
#define CAN_MB06_DATA1      0xFFC02CC4  /* Mailbox 6 Data Word 1 [31:16] Register   */
#define CAN_MB06_DATA2      0xFFC02CC8  /* Mailbox 6 Data Word 2 [47:32] Register   */
#define CAN_MB06_DATA3      0xFFC02CCC  /* Mailbox 6 Data Word 3 [63:48] Register   */
#define CAN_MB06_LENGTH     0xFFC02CD0  /* Mailbox 6 Data Length Code Register      */
#define CAN_MB06_TIMESTAMP  0xFFC02CD4  /* Mailbox 6 Time Stamp Value Register      */
#define CAN_MB06_ID0        0xFFC02CD8  /* Mailbox 6 Identifier Low Register        */
#define CAN_MB06_ID1        0xFFC02CDC  /* Mailbox 6 Identifier High Register       */

#define CAN_MB07_DATA0      0xFFC02CE0  /* Mailbox 7 Data Word 0 [15:0] Register    */
#define CAN_MB07_DATA1      0xFFC02CE4  /* Mailbox 7 Data Word 1 [31:16] Register   */
#define CAN_MB07_DATA2      0xFFC02CE8  /* Mailbox 7 Data Word 2 [47:32] Register   */
#define CAN_MB07_DATA3      0xFFC02CEC  /* Mailbox 7 Data Word 3 [63:48] Register   */
#define CAN_MB07_LENGTH     0xFFC02CF0  /* Mailbox 7 Data Length Code Register      */
#define CAN_MB07_TIMESTAMP  0xFFC02CF4  /* Mailbox 7 Time Stamp Value Register      */
#define CAN_MB07_ID0        0xFFC02CF8  /* Mailbox 7 Identifier Low Register        */
#define CAN_MB07_ID1        0xFFC02CFC  /* Mailbox 7 Identifier High Register       */

#define CAN_MB08_DATA0      0xFFC02D00  /* Mailbox 8 Data Word 0 [15:0] Register    */
#define CAN_MB08_DATA1      0xFFC02D04  /* Mailbox 8 Data Word 1 [31:16] Register   */
#define CAN_MB08_DATA2      0xFFC02D08  /* Mailbox 8 Data Word 2 [47:32] Register   */
#define CAN_MB08_DATA3      0xFFC02D0C  /* Mailbox 8 Data Word 3 [63:48] Register   */
#define CAN_MB08_LENGTH     0xFFC02D10  /* Mailbox 8 Data Length Code Register      */
#define CAN_MB08_TIMESTAMP  0xFFC02D14  /* Mailbox 8 Time Stamp Value Register      */
#define CAN_MB08_ID0        0xFFC02D18  /* Mailbox 8 Identifier Low Register        */
#define CAN_MB08_ID1        0xFFC02D1C  /* Mailbox 8 Identifier High Register       */

#define CAN_MB09_DATA0      0xFFC02D20  /* Mailbox 9 Data Word 0 [15:0] Register    */
#define CAN_MB09_DATA1      0xFFC02D24  /* Mailbox 9 Data Word 1 [31:16] Register   */
#define CAN_MB09_DATA2      0xFFC02D28  /* Mailbox 9 Data Word 2 [47:32] Register   */
#define CAN_MB09_DATA3      0xFFC02D2C  /* Mailbox 9 Data Word 3 [63:48] Register   */
#define CAN_MB09_LENGTH     0xFFC02D30  /* Mailbox 9 Data Length Code Register      */
#define CAN_MB09_TIMESTAMP  0xFFC02D34  /* Mailbox 9 Time Stamp Value Register      */
#define CAN_MB09_ID0        0xFFC02D38  /* Mailbox 9 Identifier Low Register        */
#define CAN_MB09_ID1        0xFFC02D3C  /* Mailbox 9 Identifier High Register       */

#define CAN_MB10_DATA0      0xFFC02D40  /* Mailbox 10 Data Word 0 [15:0] Register   */
#define CAN_MB10_DATA1      0xFFC02D44  /* Mailbox 10 Data Word 1 [31:16] Register  */
#define CAN_MB10_DATA2      0xFFC02D48  /* Mailbox 10 Data Word 2 [47:32] Register  */
#define CAN_MB10_DATA3      0xFFC02D4C  /* Mailbox 10 Data Word 3 [63:48] Register  */
#define CAN_MB10_LENGTH     0xFFC02D50  /* Mailbox 10 Data Length Code Register     */
#define CAN_MB10_TIMESTAMP  0xFFC02D54  /* Mailbox 10 Time Stamp Value Register     */
#define CAN_MB10_ID0        0xFFC02D58  /* Mailbox 10 Identifier Low Register       */
#define CAN_MB10_ID1        0xFFC02D5C  /* Mailbox 10 Identifier High Register      */

#define CAN_MB11_DATA0      0xFFC02D60  /* Mailbox 11 Data Word 0 [15:0] Register   */
#define CAN_MB11_DATA1      0xFFC02D64  /* Mailbox 11 Data Word 1 [31:16] Register  */
#define CAN_MB11_DATA2      0xFFC02D68  /* Mailbox 11 Data Word 2 [47:32] Register  */
#define CAN_MB11_DATA3      0xFFC02D6C  /* Mailbox 11 Data Word 3 [63:48] Register  */
#define CAN_MB11_LENGTH     0xFFC02D70  /* Mailbox 11 Data Length Code Register     */
#define CAN_MB11_TIMESTAMP  0xFFC02D74  /* Mailbox 11 Time Stamp Value Register     */
#define CAN_MB11_ID0        0xFFC02D78  /* Mailbox 11 Identifier Low Register       */
#define CAN_MB11_ID1        0xFFC02D7C  /* Mailbox 11 Identifier High Register      */

#define CAN_MB12_DATA0      0xFFC02D80  /* Mailbox 12 Data Word 0 [15:0] Register   */
#define CAN_MB12_DATA1      0xFFC02D84  /* Mailbox 12 Data Word 1 [31:16] Register  */
#define CAN_MB12_DATA2      0xFFC02D88  /* Mailbox 12 Data Word 2 [47:32] Register  */
#define CAN_MB12_DATA3      0xFFC02D8C  /* Mailbox 12 Data Word 3 [63:48] Register  */
#define CAN_MB12_LENGTH     0xFFC02D90  /* Mailbox 12 Data Length Code Register     */
#define CAN_MB12_TIMESTAMP  0xFFC02D94  /* Mailbox 12 Time Stamp Value Register     */
#define CAN_MB12_ID0        0xFFC02D98  /* Mailbox 12 Identifier Low Register       */
#define CAN_MB12_ID1        0xFFC02D9C  /* Mailbox 12 Identifier High Register      */

#define CAN_MB13_DATA0      0xFFC02DA0  /* Mailbox 13 Data Word 0 [15:0] Register   */
#define CAN_MB13_DATA1      0xFFC02DA4  /* Mailbox 13 Data Word 1 [31:16] Register  */
#define CAN_MB13_DATA2      0xFFC02DA8  /* Mailbox 13 Data Word 2 [47:32] Register  */
#define CAN_MB13_DATA3      0xFFC02DAC  /* Mailbox 13 Data Word 3 [63:48] Register  */
#define CAN_MB13_LENGTH     0xFFC02DB0  /* Mailbox 13 Data Length Code Register     */
#define CAN_MB13_TIMESTAMP  0xFFC02DB4  /* Mailbox 13 Time Stamp Value Register     */
#define CAN_MB13_ID0        0xFFC02DB8  /* Mailbox 13 Identifier Low Register       */
#define CAN_MB13_ID1        0xFFC02DBC  /* Mailbox 13 Identifier High Register      */

#define CAN_MB14_DATA0      0xFFC02DC0  /* Mailbox 14 Data Word 0 [15:0] Register   */
#define CAN_MB14_DATA1      0xFFC02DC4  /* Mailbox 14 Data Word 1 [31:16] Register  */
#define CAN_MB14_DATA2      0xFFC02DC8  /* Mailbox 14 Data Word 2 [47:32] Register  */
#define CAN_MB14_DATA3      0xFFC02DCC  /* Mailbox 14 Data Word 3 [63:48] Register  */
#define CAN_MB14_LENGTH     0xFFC02DD0  /* Mailbox 14 Data Length Code Register     */
#define CAN_MB14_TIMESTAMP  0xFFC02DD4  /* Mailbox 14 Time Stamp Value Register     */
#define CAN_MB14_ID0        0xFFC02DD8  /* Mailbox 14 Identifier Low Register       */
#define CAN_MB14_ID1        0xFFC02DDC  /* Mailbox 14 Identifier High Register      */

#define CAN_MB15_DATA0      0xFFC02DE0  /* Mailbox 15 Data Word 0 [15:0] Register   */
#define CAN_MB15_DATA1      0xFFC02DE4  /* Mailbox 15 Data Word 1 [31:16] Register  */
#define CAN_MB15_DATA2      0xFFC02DE8  /* Mailbox 15 Data Word 2 [47:32] Register  */
#define CAN_MB15_DATA3      0xFFC02DEC  /* Mailbox 15 Data Word 3 [63:48] Register  */
#define CAN_MB15_LENGTH     0xFFC02DF0  /* Mailbox 15 Data Length Code Register     */
#define CAN_MB15_TIMESTAMP  0xFFC02DF4  /* Mailbox 15 Time Stamp Value Register     */
#define CAN_MB15_ID0        0xFFC02DF8  /* Mailbox 15 Identifier Low Register       */
#define CAN_MB15_ID1        0xFFC02DFC  /* Mailbox 15 Identifier High Register      */

#define CAN_MB16_DATA0      0xFFC02E00  /* Mailbox 16 Data Word 0 [15:0] Register   */
#define CAN_MB16_DATA1      0xFFC02E04  /* Mailbox 16 Data Word 1 [31:16] Register  */
#define CAN_MB16_DATA2      0xFFC02E08  /* Mailbox 16 Data Word 2 [47:32] Register  */
#define CAN_MB16_DATA3      0xFFC02E0C  /* Mailbox 16 Data Word 3 [63:48] Register  */
#define CAN_MB16_LENGTH     0xFFC02E10  /* Mailbox 16 Data Length Code Register     */
#define CAN_MB16_TIMESTAMP  0xFFC02E14  /* Mailbox 16 Time Stamp Value Register     */
#define CAN_MB16_ID0        0xFFC02E18  /* Mailbox 16 Identifier Low Register       */
#define CAN_MB16_ID1        0xFFC02E1C  /* Mailbox 16 Identifier High Register      */

#define CAN_MB17_DATA0      0xFFC02E20  /* Mailbox 17 Data Word 0 [15:0] Register   */
#define CAN_MB17_DATA1      0xFFC02E24  /* Mailbox 17 Data Word 1 [31:16] Register  */
#define CAN_MB17_DATA2      0xFFC02E28  /* Mailbox 17 Data Word 2 [47:32] Register  */
#define CAN_MB17_DATA3      0xFFC02E2C  /* Mailbox 17 Data Word 3 [63:48] Register  */
#define CAN_MB17_LENGTH     0xFFC02E30  /* Mailbox 17 Data Length Code Register     */
#define CAN_MB17_TIMESTAMP  0xFFC02E34  /* Mailbox 17 Time Stamp Value Register     */
#define CAN_MB17_ID0        0xFFC02E38  /* Mailbox 17 Identifier Low Register       */
#define CAN_MB17_ID1        0xFFC02E3C  /* Mailbox 17 Identifier High Register      */

#define CAN_MB18_DATA0      0xFFC02E40  /* Mailbox 18 Data Word 0 [15:0] Register   */
#define CAN_MB18_DATA1      0xFFC02E44  /* Mailbox 18 Data Word 1 [31:16] Register  */
#define CAN_MB18_DATA2      0xFFC02E48  /* Mailbox 18 Data Word 2 [47:32] Register  */
#define CAN_MB18_DATA3      0xFFC02E4C  /* Mailbox 18 Data Word 3 [63:48] Register  */
#define CAN_MB18_LENGTH     0xFFC02E50  /* Mailbox 18 Data Length Code Register     */
#define CAN_MB18_TIMESTAMP  0xFFC02E54  /* Mailbox 18 Time Stamp Value Register     */
#define CAN_MB18_ID0        0xFFC02E58  /* Mailbox 18 Identifier Low Register       */
#define CAN_MB18_ID1        0xFFC02E5C  /* Mailbox 18 Identifier High Register      */

#define CAN_MB19_DATA0      0xFFC02E60  /* Mailbox 19 Data Word 0 [15:0] Register   */
#define CAN_MB19_DATA1      0xFFC02E64  /* Mailbox 19 Data Word 1 [31:16] Register  */
#define CAN_MB19_DATA2      0xFFC02E68  /* Mailbox 19 Data Word 2 [47:32] Register  */
#define CAN_MB19_DATA3      0xFFC02E6C  /* Mailbox 19 Data Word 3 [63:48] Register  */
#define CAN_MB19_LENGTH     0xFFC02E70  /* Mailbox 19 Data Length Code Register     */
#define CAN_MB19_TIMESTAMP  0xFFC02E74  /* Mailbox 19 Time Stamp Value Register     */
#define CAN_MB19_ID0        0xFFC02E78  /* Mailbox 19 Identifier Low Register       */
#define CAN_MB19_ID1        0xFFC02E7C  /* Mailbox 19 Identifier High Register      */

#define CAN_MB20_DATA0      0xFFC02E80  /* Mailbox 20 Data Word 0 [15:0] Register   */
#define CAN_MB20_DATA1      0xFFC02E84  /* Mailbox 20 Data Word 1 [31:16] Register  */
#define CAN_MB20_DATA2      0xFFC02E88  /* Mailbox 20 Data Word 2 [47:32] Register  */
#define CAN_MB20_DATA3      0xFFC02E8C  /* Mailbox 20 Data Word 3 [63:48] Register  */
#define CAN_MB20_LENGTH     0xFFC02E90  /* Mailbox 20 Data Length Code Register     */
#define CAN_MB20_TIMESTAMP  0xFFC02E94  /* Mailbox 20 Time Stamp Value Register     */
#define CAN_MB20_ID0        0xFFC02E98  /* Mailbox 20 Identifier Low Register       */
#define CAN_MB20_ID1        0xFFC02E9C  /* Mailbox 20 Identifier High Register      */

#define CAN_MB21_DATA0      0xFFC02EA0  /* Mailbox 21 Data Word 0 [15:0] Register   */
#define CAN_MB21_DATA1      0xFFC02EA4  /* Mailbox 21 Data Word 1 [31:16] Register  */
#define CAN_MB21_DATA2      0xFFC02EA8  /* Mailbox 21 Data Word 2 [47:32] Register  */
#define CAN_MB21_DATA3      0xFFC02EAC  /* Mailbox 21 Data Word 3 [63:48] Register  */
#define CAN_MB21_LENGTH     0xFFC02EB0  /* Mailbox 21 Data Length Code Register     */
#define CAN_MB21_TIMESTAMP  0xFFC02EB4  /* Mailbox 21 Time Stamp Value Register     */
#define CAN_MB21_ID0        0xFFC02EB8  /* Mailbox 21 Identifier Low Register       */
#define CAN_MB21_ID1        0xFFC02EBC  /* Mailbox 21 Identifier High Register      */

#define CAN_MB22_DATA0      0xFFC02EC0  /* Mailbox 22 Data Word 0 [15:0] Register   */
#define CAN_MB22_DATA1      0xFFC02EC4  /* Mailbox 22 Data Word 1 [31:16] Register  */
#define CAN_MB22_DATA2      0xFFC02EC8  /* Mailbox 22 Data Word 2 [47:32] Register  */
#define CAN_MB22_DATA3      0xFFC02ECC  /* Mailbox 22 Data Word 3 [63:48] Register  */
#define CAN_MB22_LENGTH     0xFFC02ED0  /* Mailbox 22 Data Length Code Register     */
#define CAN_MB22_TIMESTAMP  0xFFC02ED4  /* Mailbox 22 Time Stamp Value Register     */
#define CAN_MB22_ID0        0xFFC02ED8  /* Mailbox 22 Identifier Low Register       */
#define CAN_MB22_ID1        0xFFC02EDC  /* Mailbox 22 Identifier High Register      */

#define CAN_MB23_DATA0      0xFFC02EE0  /* Mailbox 23 Data Word 0 [15:0] Register   */
#define CAN_MB23_DATA1      0xFFC02EE4  /* Mailbox 23 Data Word 1 [31:16] Register  */
#define CAN_MB23_DATA2      0xFFC02EE8  /* Mailbox 23 Data Word 2 [47:32] Register  */
#define CAN_MB23_DATA3      0xFFC02EEC  /* Mailbox 23 Data Word 3 [63:48] Register  */
#define CAN_MB23_LENGTH     0xFFC02EF0  /* Mailbox 23 Data Length Code Register     */
#define CAN_MB23_TIMESTAMP  0xFFC02EF4  /* Mailbox 23 Time Stamp Value Register     */
#define CAN_MB23_ID0        0xFFC02EF8  /* Mailbox 23 Identifier Low Register       */
#define CAN_MB23_ID1        0xFFC02EFC  /* Mailbox 23 Identifier High Register      */

#define CAN_MB24_DATA0      0xFFC02F00  /* Mailbox 24 Data Word 0 [15:0] Register   */
#define CAN_MB24_DATA1      0xFFC02F04  /* Mailbox 24 Data Word 1 [31:16] Register  */
#define CAN_MB24_DATA2      0xFFC02F08  /* Mailbox 24 Data Word 2 [47:32] Register  */
#define CAN_MB24_DATA3      0xFFC02F0C  /* Mailbox 24 Data Word 3 [63:48] Register  */
#define CAN_MB24_LENGTH     0xFFC02F10  /* Mailbox 24 Data Length Code Register     */
#define CAN_MB24_TIMESTAMP  0xFFC02F14  /* Mailbox 24 Time Stamp Value Register     */
#define CAN_MB24_ID0        0xFFC02F18  /* Mailbox 24 Identifier Low Register       */
#define CAN_MB24_ID1        0xFFC02F1C  /* Mailbox 24 Identifier High Register      */

#define CAN_MB25_DATA0      0xFFC02F20  /* Mailbox 25 Data Word 0 [15:0] Register   */
#define CAN_MB25_DATA1      0xFFC02F24  /* Mailbox 25 Data Word 1 [31:16] Register  */
#define CAN_MB25_DATA2      0xFFC02F28  /* Mailbox 25 Data Word 2 [47:32] Register  */
#define CAN_MB25_DATA3      0xFFC02F2C  /* Mailbox 25 Data Word 3 [63:48] Register  */
#define CAN_MB25_LENGTH     0xFFC02F30  /* Mailbox 25 Data Length Code Register     */
#define CAN_MB25_TIMESTAMP  0xFFC02F34  /* Mailbox 25 Time Stamp Value Register     */
#define CAN_MB25_ID0        0xFFC02F38  /* Mailbox 25 Identifier Low Register       */
#define CAN_MB25_ID1        0xFFC02F3C  /* Mailbox 25 Identifier High Register      */

#define CAN_MB26_DATA0      0xFFC02F40  /* Mailbox 26 Data Word 0 [15:0] Register   */
#define CAN_MB26_DATA1      0xFFC02F44  /* Mailbox 26 Data Word 1 [31:16] Register  */
#define CAN_MB26_DATA2      0xFFC02F48  /* Mailbox 26 Data Word 2 [47:32] Register  */
#define CAN_MB26_DATA3      0xFFC02F4C  /* Mailbox 26 Data Word 3 [63:48] Register  */
#define CAN_MB26_LENGTH     0xFFC02F50  /* Mailbox 26 Data Length Code Register     */
#define CAN_MB26_TIMESTAMP  0xFFC02F54  /* Mailbox 26 Time Stamp Value Register     */
#define CAN_MB26_ID0        0xFFC02F58  /* Mailbox 26 Identifier Low Register       */
#define CAN_MB26_ID1        0xFFC02F5C  /* Mailbox 26 Identifier High Register      */

#define CAN_MB27_DATA0      0xFFC02F60  /* Mailbox 27 Data Word 0 [15:0] Register   */
#define CAN_MB27_DATA1      0xFFC02F64  /* Mailbox 27 Data Word 1 [31:16] Register  */
#define CAN_MB27_DATA2      0xFFC02F68  /* Mailbox 27 Data Word 2 [47:32] Register  */
#define CAN_MB27_DATA3      0xFFC02F6C  /* Mailbox 27 Data Word 3 [63:48] Register  */
#define CAN_MB27_LENGTH     0xFFC02F70  /* Mailbox 27 Data Length Code Register     */
#define CAN_MB27_TIMESTAMP  0xFFC02F74  /* Mailbox 27 Time Stamp Value Register     */
#define CAN_MB27_ID0        0xFFC02F78  /* Mailbox 27 Identifier Low Register       */
#define CAN_MB27_ID1        0xFFC02F7C  /* Mailbox 27 Identifier High Register      */

#define CAN_MB28_DATA0      0xFFC02F80  /* Mailbox 28 Data Word 0 [15:0] Register   */
#define CAN_MB28_DATA1      0xFFC02F84  /* Mailbox 28 Data Word 1 [31:16] Register  */
#define CAN_MB28_DATA2      0xFFC02F88  /* Mailbox 28 Data Word 2 [47:32] Register  */
#define CAN_MB28_DATA3      0xFFC02F8C  /* Mailbox 28 Data Word 3 [63:48] Register  */
#define CAN_MB28_LENGTH     0xFFC02F90  /* Mailbox 28 Data Length Code Register     */
#define CAN_MB28_TIMESTAMP  0xFFC02F94  /* Mailbox 28 Time Stamp Value Register     */
#define CAN_MB28_ID0        0xFFC02F98  /* Mailbox 28 Identifier Low Register       */
#define CAN_MB28_ID1        0xFFC02F9C  /* Mailbox 28 Identifier High Register      */

#define CAN_MB29_DATA0      0xFFC02FA0  /* Mailbox 29 Data Word 0 [15:0] Register   */
#define CAN_MB29_DATA1      0xFFC02FA4  /* Mailbox 29 Data Word 1 [31:16] Register  */
#define CAN_MB29_DATA2      0xFFC02FA8  /* Mailbox 29 Data Word 2 [47:32] Register  */
#define CAN_MB29_DATA3      0xFFC02FAC  /* Mailbox 29 Data Word 3 [63:48] Register  */
#define CAN_MB29_LENGTH     0xFFC02FB0  /* Mailbox 29 Data Length Code Register     */
#define CAN_MB29_TIMESTAMP  0xFFC02FB4  /* Mailbox 29 Time Stamp Value Register     */
#define CAN_MB29_ID0        0xFFC02FB8  /* Mailbox 29 Identifier Low Register       */
#define CAN_MB29_ID1        0xFFC02FBC  /* Mailbox 29 Identifier High Register      */

#define CAN_MB30_DATA0      0xFFC02FC0  /* Mailbox 30 Data Word 0 [15:0] Register   */
#define CAN_MB30_DATA1      0xFFC02FC4  /* Mailbox 30 Data Word 1 [31:16] Register  */
#define CAN_MB30_DATA2      0xFFC02FC8  /* Mailbox 30 Data Word 2 [47:32] Register  */
#define CAN_MB30_DATA3      0xFFC02FCC  /* Mailbox 30 Data Word 3 [63:48] Register  */
#define CAN_MB30_LENGTH     0xFFC02FD0  /* Mailbox 30 Data Length Code Register     */
#define CAN_MB30_TIMESTAMP  0xFFC02FD4  /* Mailbox 30 Time Stamp Value Register     */
#define CAN_MB30_ID0        0xFFC02FD8  /* Mailbox 30 Identifier Low Register       */
#define CAN_MB30_ID1        0xFFC02FDC  /* Mailbox 30 Identifier High Register      */

#define CAN_MB31_DATA0      0xFFC02FE0  /* Mailbox 31 Data Word 0 [15:0] Register   */
#define CAN_MB31_DATA1      0xFFC02FE4  /* Mailbox 31 Data Word 1 [31:16] Register  */
#define CAN_MB31_DATA2      0xFFC02FE8  /* Mailbox 31 Data Word 2 [47:32] Register  */
#define CAN_MB31_DATA3      0xFFC02FEC  /* Mailbox 31 Data Word 3 [63:48] Register  */
#define CAN_MB31_LENGTH     0xFFC02FF0  /* Mailbox 31 Data Length Code Register     */
#define CAN_MB31_TIMESTAMP  0xFFC02FF4  /* Mailbox 31 Time Stamp Value Register     */
#define CAN_MB31_ID0        0xFFC02FF8  /* Mailbox 31 Identifier Low Register       */
#define CAN_MB31_ID1        0xFFC02FFC  /* Mailbox 31 Identifier High Register      */

/* CAN Mailbox Area Macros              */
#define CAN_MB_ID1(x)       (CAN_MB00_ID1+((x)*0x20))
#define CAN_MB_ID0(x)       (CAN_MB00_ID0+((x)*0x20))
#define CAN_MB_TIMESTAMP(x) (CAN_MB00_TIMESTAMP+((x)*0x20))
#define CAN_MB_LENGTH(x)    (CAN_MB00_LENGTH+((x)*0x20))
#define CAN_MB_DATA3(x)     (CAN_MB00_DATA3+((x)*0x20))
#define CAN_MB_DATA2(x)     (CAN_MB00_DATA2+((x)*0x20))
#define CAN_MB_DATA1(x)     (CAN_MB00_DATA1+((x)*0x20))
#define CAN_MB_DATA0(x)     (CAN_MB00_DATA0+((x)*0x20))



/* Motor Control PWM1 Registers (0xFFC03000 - 0xFFC030FF)                                   */
#define PWM1_CTRL               0xFFC03000  /* PWM1 Control Register                        */
#define PWM1_STAT               0xFFC03004  /* PWM1 Status Register                         */
#define PWM1_TM                 0xFFC03008  /* PWM1 Period Register                         */
#define PWM1_DT                 0xFFC0300C  /* PWM1 Dead Time Register                      */
#define PWM1_GATE               0xFFC03010  /* PWM1 Chopping Control                        */
#define PWM1_CHA                0xFFC03014  /* PWM1 Channel A Duty Control                  */
#define PWM1_CHB                0xFFC03018  /* PWM1 Channel B Duty Control                  */
#define PWM1_CHC                0xFFC0301C  /* PWM1 Channel C Duty Control                  */
#define PWM1_SEG                0xFFC03020  /* PWM1 Crossover and Output Enable             */
#define PWM1_SYNCWT             0xFFC03024  /* PWM1 Sync pulse width control                */
#define PWM1_CHAL               0xFFC03028  /* PWM1 Channel AL Duty Control (SR mode only)  */
#define PWM1_CHBL               0xFFC0302C  /* PWM1 Channel BL Duty Control (SR mode only)  */
#define PWM1_CHCL               0xFFC03030  /* PWM1 Channel CL Duty Control (SR mode only)  */
#define PWM1_LSI                0xFFC03034  /* Low Side Invert (SR mode only)               */
#define PWM1_STAT2              0xFFC03038  /* PWM1 Status Register                         */


/* ADC Controller Module Registers (0xFFC03100 - 0xFFC031FF) */
#define ACM_CTL        0xFFC03100  /* ACM Control Register                  */
#define ACM_TC0        0xFFC03104  /* ACM Timing Configuration 0 Register   */
#define ACM_TC1        0xFFC03108  /* ACM Timing Configuration 1 Register   */
#define ACM_STAT       0xFFC0310C  /* ACM Status Register                   */
#define ACM_ES         0xFFC03110  /* ACM Event Status Register             */
#define ACM_IMSK       0xFFC03114  /* ACM Interrupt Mask Register           */
#define ACM_MS         0xFFC03118  /* ACM Missed Event Status Register      */
#define ACM_EMSK       0xFFC0311C  /* ACM Missed Event Interrupt Mask Register */

#define ACM_ER0        0xFFC03120  /* ACM Event 0 Control Register          */
#define ACM_ER1        0xFFC03124  /* ACM Event 1 Control Register          */
#define ACM_ER2        0xFFC03128  /* ACM Event 2 Control Register          */
#define ACM_ER3        0xFFC0312C  /* ACM Event 3 Control Register          */
#define ACM_ER4        0xFFC03130  /* ACM Event 4 Control Register          */
#define ACM_ER5        0xFFC03134  /* ACM Event 5 Control Register          */
#define ACM_ER6        0xFFC03138  /* ACM Event 6 Control Register          */
#define ACM_ER7        0xFFC0313C  /* ACM Event 7 Control Register          */
#define ACM_ER8        0xFFC03140  /* ACM Event 8 Control Register          */
#define ACM_ER9        0xFFC03144  /* ACM Event 9 Control Register          */
#define ACM_ER10       0xFFC03148  /* ACM Event 10 Control Register         */
#define ACM_ER11       0xFFC0314C  /* ACM Event 11 Control Register         */
#define ACM_ER12       0xFFC03150  /* ACM Event 12 Control Register         */
#define ACM_ER13       0xFFC03154  /* ACM Event 13 Control Register         */
#define ACM_ER14       0xFFC03158  /* ACM Event 14 Control Register         */
#define ACM_ER15       0xFFC0315C  /* ACM Event 15 Control Register         */

#define ACM_ET0        0xFFC03180  /* ACM Event 0 Time Register             */
#define ACM_ET1        0xFFC03184  /* ACM Event 1 Time Register             */
#define ACM_ET2        0xFFC03188  /* ACM Event 2 Time Register             */
#define ACM_ET3        0xFFC0318C  /* ACM Event 3 Time Register             */
#define ACM_ET4        0xFFC03190  /* ACM Event 4 Time Register             */
#define ACM_ET5        0xFFC03194  /* ACM Event 5 Time Register             */
#define ACM_ET6        0xFFC03198  /* ACM Event 6 Time Register             */
#define ACM_ET7        0xFFC0319C  /* ACM Event 7 Time Register             */
#define ACM_ET8        0xFFC031A0  /* ACM Event 8 Time Register             */
#define ACM_ET9        0xFFC031A4  /* ACM Event 9 Time Register             */
#define ACM_ET10       0xFFC031A8  /* ACM Event 10 Time Register            */
#define ACM_ET11       0xFFC031AC  /* ACM Event 11 Time Register            */
#define ACM_ET12       0xFFC031B0  /* ACM Event 12 Time Register            */
#define ACM_ET13       0xFFC031B4  /* ACM Event 13 Time Register            */
#define ACM_ET14       0xFFC031B8  /* ACM Event 14 Time Register            */
#define ACM_ET15       0xFFC031BC  /* ACM Event 15 Time Register            */

#define ACM_TMR0       0xFFC031C0  /* ACM Timer 0 Registers                 */
#define ACM_TMR1       0xFFC031C4  /* ACM Timer 1 Registers                 */


/* Pin Control Registers        (0xFFC03200 - 0xFFC032FF)                                   */
#define PORTF_FER               0xFFC03200  /* Port F Function Enable Register (Alternate/Flag*) */
#define PORTG_FER               0xFFC03204  /* Port G Function Enable Register (Alternate/Flag*) */
#define PORTH_FER               0xFFC03208  /* Port H Function Enable Register (Alternate/Flag*) */


/* GPIO PIN mux                 (0xFFC03210 - OxFFC03288)                                   */
#define PORTF_MUX               0xFFC03210  /* Port F mux control                           */
#define PORTG_MUX               0xFFC03214  /* Port G mux control                           */
#define PORTH_MUX               0xFFC03218  /* Port H mux control                           */
#define PORTF_HYSTERESIS        0xFFC03240  /* Port F Schmitt trigger control               */
#define PORTG_HYSTERESIS        0xFFC03244  /* Port G Schmitt trigger control               */
#define PORTH_HYSTERESIS        0xFFC03248  /* Port H Schmitt trigger control               */

#define NONGPIO_DRIVE           0xFFC03280  /* Misc Port drive strength control             */
#define NONGPIO_HYSTERESIS      0xFFC03288  /* Misc Port Schmitt Trigger control            */

#define FLASH_CONTROL           0xFFC0328C  /* Stacked flash control register               */
#define FLASH_CONTROL_SET       0xFFC03290  /* Stacked flash control set register           */
#define FLASH_CONTROL_CLEAR     0xFFC03294  /* Stacked flash control clear register         */


/* Counter 1 Registers          (0xFFC03300 - 0xFFC033FF)                                   */
#define CNT1_CONFIG             0xFFC03300  /* Counter 1 Configuration Register             */
#define CNT1_IMASK              0xFFC03304  /* Counter 1 Interrupt Mask Register            */
#define CNT1_STATUS             0xFFC03308  /* Counter 1 Status Register                    */
#define CNT1_COMMAND            0xFFC0330C  /* Counter 1 Command Register                   */
#define CNT1_DEBOUNCE           0xFFC03310  /* Counter 1 Debounce Register                  */
#define CNT1_COUNTER            0xFFC03314  /* Counter 1 Counter Register                   */
#define CNT1_MAX                0xFFC03318  /* Counter 1 Boundry Value Register - max count */
#define CNT1_MIN                0xFFC0331C  /* Counter 1 Boundry Value Register - min count */


/* SPI1 Controller              (0xFFC03400 - 0xFFC034FF)                                   */
#define SPI1_CTL                0xFFC03400  /* SPI1 Control Register                        */
#define SPI1_FLG                0xFFC03404  /* SPI1 Flag register                           */
#define SPI1_STAT               0xFFC03408  /* SPI1 Status register                         */
#define SPI1_TDBR               0xFFC0340C  /* SPI1 Transmit Data Buffer Register           */
#define SPI1_RDBR               0xFFC03410  /* SPI1 Receive Data Buffer Register            */
#define SPI1_BAUD               0xFFC03414  /* SPI1 Baud rate Register                      */
#define SPI1_SHADOW             0xFFC03418  /* SPI1_RDBR Shadow Register                    */


/* Counter 0 Registers          (0xFFC03500 - 0xFFC035FF)                                   */
#define CNT0_CONFIG             0xFFC03500  /* Counter 0 Configuration Register             */
#define CNT0_IMASK              0xFFC03504  /* Counter 0 Interrupt Mask Register            */
#define CNT0_STATUS             0xFFC03508  /* Counter 0 Status Register                    */
#define CNT0_COMMAND            0xFFC0350C  /* Counter 0 Command Register                   */
#define CNT0_DEBOUNCE           0xFFC03510  /* Counter 0 Debounce Register                  */
#define CNT0_COUNTER            0xFFC03514  /* Counter 0 Counter Register                   */
#define CNT0_MAX                0xFFC03518  /* Counter 0 Boundry Value Register - max count */
#define CNT0_MIN                0xFFC0351C  /* Counter 0 Boundry Value Register - min count */


/* Motor Control PWM0 Registers (0xFFC03700 - 0xFFC037FF)                                   */
#define PWM0_CTRL               0xFFC03700  /* PWM0 Control Register                        */
#define PWM0_STAT               0xFFC03704  /* PWM0 Status Register                         */
#define PWM0_TM                 0xFFC03708  /* PWM0 Period Register                         */
#define PWM0_DT                 0xFFC0370C  /* PWM0 Dead Time Register                      */
#define PWM0_GATE               0xFFC03710  /* PWM0 Chopping Control                        */
#define PWM0_CHA                0xFFC03714  /* PWM0 Channel A Duty Control                  */
#define PWM0_CHB                0xFFC03718  /* PWM0 Channel B Duty Control                  */
#define PWM0_CHC                0xFFC0371C  /* PWM0 Channel C Duty Control                  */
#define PWM0_SEG                0xFFC03720  /* PWM0 Crossover and Output Enable             */
#define PWM0_SYNCWT             0xFFC03724  /* PWM0 Sync pulse width control                */
#define PWM0_CHAL               0xFFC03728  /* PWM0 Channel AL Duty Control (SR mode only)  */
#define PWM0_CHBL               0xFFC0372C  /* PWM0 Channel BL Duty Control (SR mode only)  */
#define PWM0_CHCL               0xFFC03730  /* PWM0 Channel CL Duty Control (SR mode only)  */
#define PWM0_LSI                0xFFC03734  /* Low Side Invert (SR mode only)               */
#define PWM0_STAT2              0xFFC03738  /* PWM0 Status Register                         */


/* RSI Registers                (0xFFC03800 - 0xFFC03CFF)                                   */
#define RSI_PWR_CONTROL         0xFFC03800      /* RSI Power Control Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PWR_CTL             (RSI_PWR_CONTROL)/* SDH Power Control */
#define RSI_CLK_CONTROL         0xFFC03804      /* RSI Clock Control Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_CLK_CTL             (RSI_CLK_CONTROL)/* SDH Clock Control */
#define RSI_ARGUMENT            0xFFC03808      /* RSI Argument Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_ARGUMENT            (RSI_ARGUMENT)  /* SDH Argument */
#define RSI_COMMAND             0xFFC0380C      /* RSI Command Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_COMMAND             (RSI_COMMAND)       /* SDH Command */
#define RSI_RESP_CMD            0xFFC03810      /* RSI Response Command Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESP_CMD            (RSI_RESP_CMD)      /* SDH Response Command */
#define RSI_RESPONSE0           0xFFC03814      /* RSI Response Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESPONSE0           (RSI_RESPONSE0)     /* SDH Response0 */
#define RSI_RESPONSE1           0xFFC03818      /* RSI Response Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESPONSE1           (RSI_RESPONSE1)     /* SDH Response1 */
#define RSI_RESPONSE2           0xFFC0381C  /* RSI Response Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESPONSE2           (RSI_RESPONSE2)     /* SDH Response2 */
#define RSI_RESPONSE3           0xFFC03820      /* RSI Response Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RESPONSE3           (RSI_RESPONSE3)     /* SDH Response3 */
#define RSI_DATA_TIMER          0xFFC03824      /* RSI Data Timer Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_DATA_TIMER          (RSI_DATA_TIMER)    /* SDH Data Timer */
#define RSI_DATA_LGTH           0xFFC03828      /* RSI Data Length Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_DATA_LGTH           (RSI_DATA_LGTH)     /* SDH Data Length */
#define RSI_DATA_CONTROL        0xFFC0382C      /* RSI Data Control Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_DATA_CTL            (RSI_DATA_CONTROL)  /* SDH Data Control */
#define RSI_DATA_CNT            0xFFC03830      /* RSI Data Counter Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_DATA_CNT            (RSI_DATA_CNT)      /* SDH Data Counter */
#define RSI_STATUS              0xFFC03834      /* RSI Status Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_STATUS              (RSI_STATUS)        /* SDH Status */
#define RSI_STATUSCL            0xFFC03838      /* RSI Status Clear Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_STATUS_CLR          (RSI_STATUSCL)      /* SDH Status Clear */
#define RSI_MASK0               0xFFC0383C      /* RSI Interrupt 0 Mask Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_MASK0               (RSI_MASK0)         /* SDH Interrupt0 Mask */
#define RSI_MASK1               0xFFC03840      /* RSI Interrupt 1 Mask Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_MASK1               (RSI_MASK1)         /* SDH Interrupt1 Mask */
#define RSI_FIFO_CNT            0xFFC03848      /* RSI FIFO Counter Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_FIFO_CNT            (RSI_FIFO_CNT)      /* SDH FIFO Counter */
#define RSI_CEATA_CONTROL       0xFFC0384C      /* RSI CEATA Register */
#define RSI_FIFO                0xFFC03880      /* RSI Data FIFO Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_FIFO                (RSI_FIFO)          /* SDH Data FIFO */
#define RSI_ESTAT               0xFFC038C0      /* RSI Exception Status Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_E_STATUS            (RSI_ESTAT)         /* SDH Exception Status */
#define RSI_EMASK               0xFFC038C4      /* RSI Exception Mask Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_E_MASK              (RSI_EMASK)         /* SDH Exception Mask */
#define RSI_CONFIG              0xFFC038C8      /* RSI Configuration Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_CFG                 (RSI_CONFIG)        /* SDH Configuration */
#define RSI_RD_WAIT_EN          0xFFC038CC      /* RSI Read Wait Enable Register */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_RD_WAIT_EN          (RSI_RD_WAIT_EN)    /* SDH Read Wait Enable */
#define RSI_PID0                0xFFC038D0      /* RSI Peripheral ID Register 0 */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PID0                (RSI_PID0)          /* SDH Peripheral Identification0 */
#define RSI_PID1                0xFFC038D4      /* RSI Peripheral ID Register 1 */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PID1                (RSI_PID1)          /* SDH Peripheral Identification1 */
#define RSI_PID2                0xFFC038D8      /* RSI Peripheral ID Register 2 */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PID2                (RSI_PID2)          /* SDH Peripheral Identification2 */
#define RSI_PID3                0xFFC038DC      /* RSI Peripheral ID Register 3 */
/* legacy register name (below) provided for backwards code compatibility */
#define SDH_PID3                (RSI_PID3)          /* SDH Peripheral Identification3 */


/******************************************************************************************************************
** System MMR Register Bits And Macros
**
** Disclaimer:  All macros are intended to make C and Assembly code more readable.
**          Use these macros carefully, as any that do left shifts for field
**          depositing will result in the lower order bits being destroyed.  Any
**          macro that shifts left to properly position the bit-field should be
**          used as part of an OR to initialize a register and NOT as a dynamic
**          modifier UNLESS the lower order bits are saved and ORed back in when
**          the macro is used.
*******************************************************************************************************************/

/************************************** PLL AND RESET MASKS *******************************************************/

/* PLL_CTL Masks */
#define DF                  0x0001  /* 0: PLL = CLKIN, 1: PLL = CLKIN/2                     */
#define PLL_OFF             0x0002  /* PLL Not Powered                              */
#define STOPCK              0x0008  /* Core Clock Off                                   */
#define PDWN                0x0020  /* Enter Deep Sleep Mode                            */
#define IN_DELAY                0x0040  /* Add 200ps Delay To EBIU Input Latches                    */
#define OUT_DELAY               0x0080  /* Add 200ps Delay To EBIU Output Signals                   */
#define BYPASS              0x0100  /* Bypass the PLL                                   */
#define MSEL                0x7E00  /* Multiplier Select For CCLK/VCO Factors                   */

/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
#ifdef _MISRA_RULES
#define SET_MSEL(x) (((x)&0x3Fu) << 0x9)    /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL                 */
#else
#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL                 */
#endif /* _MISRA_RULES */

/* PLL_DIV Masks */
#define SSEL                0x000F  /* System Select                                    */
#define CSEL                0x0030  /* Core Select                                  */
#define CSEL_DIV1               0x0000  /* CCLK = VCO / 1                                   */
#define CSEL_DIV2               0x0010  /* CCLK = VCO / 2                                   */
#define CSEL_DIV4               0x0020  /* CCLK = VCO / 4                                   */
#define CSEL_DIV8               0x0030  /* CCLK = VCO / 8                                   */

/* PLL_DIV Macros   */
#ifdef _MISRA_RULES
#define SET_SSEL(x)         ((x)&0xFu)  /* Set SSEL = 0-15 --> SCLK = VCO/SSEL                  */
#else
#define SET_SSEL(x)         ((x)&0xF)   /* Set SSEL = 0-15 --> SCLK = VCO/SSEL                  */
#endif /* _MISRA_RULES */

/* VR_CTL Masks */
#define WAKE_POLARITY           0x8000  /* GPIO wakeup active level                         */
#define EXTCLK_OE               0x4000  /* Enable/disable EXTCLK                            */
#define EXTCLK_SEL              0x2000  /* EXTCLK Select                                    */
#define HIBERNATEB              0x1000  /* Bit mask for HIBERNATEB                          */
#define HIBERNATE               0x0000  /* Enter Hibernate - this bit is active LOW         */
#define WAKE_EN0				0x0100	/* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN0 signal	*/
#define WAKE_EN1				0x0200	/* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN1 signal	*/
#define CANWE                   0x0400  /* CAN Rx Wakeup Enable                             */
#define WAKE_EN2				0x0800	/* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN3 signal	*/

/* PLL_STAT Masks   */
#define ACTIVE_PLLENABLED       0x0001  /* Processor In Active Mode With PLL Enabled                */
#define FULL_ON             0x0002  /* Processor In Full On Mode                            */
#define ACTIVE_PLLDISABLED      0x0004  /* Processor In Active Mode With PLL Disabled               */
#define PLL_LOCKED          0x0020  /* PLL_LOCKCNT Has Been Reached                     */

/* SWRST Masks */
#define SYSTEM_RESET            0x0007  /* Initiates A System Software Reset                    */
#define DOUBLE_FAULT            0x0008  /* Core Double Fault Causes Reset                       */
#define RESET_DOUBLE            0x2000  /* SW Reset Generated By Core Double-Fault              */
#define RESET_WDOG          0x4000  /* SW Reset Generated By Watchdog Timer                 */
#define RESET_SOFTWARE          0x8000  /* SW Reset Occurred Since Last Read Of SWRST               */

/* SYSCR Masks */
#define BMODE_BYPASS            0x0000  /* Bypass boot ROM, execute from 16-bit external memory  */
#define BMODE_FLASH_ASYNC       0x0001  /* Boot from stacked parallel flash in asynchornous mode */
#define BMODE_FLASH_SYNC        0x0002  /* Boot from stacked parallel flash in synchornous mode  */
#define BMODE_SPIMEM            0x0003  /* Boot from serial SPI memory (master mode)             */
#define BMODE_SPIHOST           0x0004  /* Boot from SPI0 host (slave mode)                      */
#define BMODE_PPIHOST           0x0005  /* Boot from PPI host                                    */
#define BMODE_UART0HOST         0x0007  /* Boot from UART0 host                                  */

#define BMODE                   0x000F  /* Boot Mode. Mirror of BMODE Mode Pins                  */

#define BCODE                   0x00F0
#define BCODE_NORMAL            0x0000  /* normal boot, update PLL/VR, quickboot as by WURESET   */
#define BCODE_NOBOOT            0x0010  /* bypass boot, don't update PLL/VR                      */
#define BCODE_QUICKBOOT         0x0020  /* quick boot, overrule WURESET, don't update PLL/VR     */
#define BCODE_ALLBOOT           0x0040  /* no quick boot, overrule WURESET, don't update PLL/VR  */
#define BCODE_FULLBOOT          0x0060  /* no quick boot, overrule WURESET, update PLL/VR        */

#define WURESET                 0x1000  /* wakeup event since last hardware reset                */
#define DFRESET                 0x2000  /* recent reset was due to a double fault event          */
#define WDRESET                 0x4000  /* recent reset was due to a watchdog event              */
#define SWRESET                 0x8000  /* recent reset was issued by software                   */

/*********************************  SYSTEM INTERRUPT CONTROLLER MASKS *********************************************/

/* Peripheral Masks For SIC_ISR0, SIC_IWR0, SIC_IMASK0 */
#define IRQ_PLL_WAKEUP          0x00000001  /* PLL Wakeup Interrupt                                     */
#define IRQ_DMA_ERR0            0x00000002  /* Error Interrupt (DMA error interrupt (generic))          */
#define IRQ_PPI_ERR             0x00000004  /* Error Interrupt (PPI error interrupt)                    */
#define IRQ_SPORT0_ERR          0x00000008  /* Error Interrupt (SPORT0 status interrupt)                */
#define IRQ_SPORT1_ERR          0x00000010  /* Error Interrupt (SPORT1 status interrupt)                */
#define IRQ_UART0_ERR           0x00000020  /* Error Interrupt (UART0 status interrupt)                 */
#define IRQ_UART1_ERR           0x00000040  /* Error Interrupt (UART1 status interrupt)                 */
#define IRQ_SPI0_ERR            0x00000080  /* Error Interrupt (SPI0 status interrupt)                  */
#define IRQ_SPI1_ERR            0x00000100  /* Error Interrupt (SPI1 status interrupt)                  */
#define IRQ_CAN_ERR             0x00000200  /* Error Interrupt (CAN status interrupt)                   */
#define IRQ_RSI_INT0            0x00000400  /* RSI Mask 0 Interrupt                                     */
                                            /* Bit 11 is reserved                                       */
#define IRQ_CNT0                0x00001000  /* GP Counter 0 Interrupt                                   */
#define IRQ_CNT1                0x00002000  /* GP Counter 1 Interrupt                                   */
#define IRQ_DMA0                0x00004000  /* DMA Channel 0 (PPI Rx/Tx) Interrupt                      */
#define IRQ_DMA1                0x00008000  /* DMA Channel 1 (RSI Rx/Tx) Interrupt                      */
#define IRQ_DMA2                0x00010000  /* DMA Channel 2 (SPORT0 Rx) Interrupt                      */
#define IRQ_DMA3                0x00020000  /* DMA Channel 3 (SPORT0 Tx) Interrupt                      */
#define IRQ_DMA4                0x00040000  /* DMA Channel 4 (SPORT1 Rx) Interrupt                      */
#define IRQ_DMA5                0x00080000  /* DMA Channel 5 (SPORT1 Tx) Interrupt                      */
#define IRQ_DMA6                0x00100000  /* DMA Channel 6 (SPI0 Rx/Tx) Interrupt                     */
#define IRQ_DMA7                0x00200000  /* DMA Channel 7 (SPI1 Rx/Tx) Interrupt                     */
#define IRQ_DMA8                0x00400000  /* DMA Channel 8 (UART0 Rx) Interrupt                       */
#define IRQ_DMA9                0x00800000  /* DMA Channel 9 (UART0 Tx) Interrupt                       */
#define IRQ_DMA10               0x01000000  /* DMA Channel 10 (UART1 Rx) Interrupt                      */
#define IRQ_DMA11               0x02000000  /* DMA Channel 11 (UART1 Tx) Interrupt                      */
#define IRQ_CAN_RX              0x04000000  /* CAN Rx Interrupt                                         */
#define IRQ_CAN_TX              0x08000000  /* CAN Tx Interrupt                                         */
#define IRQ_TWI                 0x10000000  /* TWI Interrupt                                            */
#define IRQ_PFA_PORTF           0x20000000  /* PF Port F Interrupt A                                    */
#define IRQ_PFB_PORTF           0x40000000  /* PF Port F Interrupt B                                    */
                                            /* Bit 31 is reserved                                       */


/* Peripheral Masks For SIC_ISR1, SIC_IWR1, SIC_IMASK1 */
#define IRQ_TIMER0              0x00000001  /* Timer 0 Interrupt                                        */
#define IRQ_TIMER1              0x00000002  /* Timer 1 Interrupt                                        */
#define IRQ_TIMER2              0x00000004  /* Timer 2 Interrupt                                        */
#define IRQ_TIMER3              0x00000008  /* Timer 3 Interrupt                                        */
#define IRQ_TIMER4              0x00000010  /* Timer 4 Interrupt                                        */
#define IRQ_TIMER5              0x00000020  /* Timer 5 Interrupt                                        */
#define IRQ_TIMER6              0x00000040  /* Timer 6 Interrupt                                        */
#define IRQ_TIMER7              0x00000080  /* Timer 7 Interrupt                                        */
#define IRQ_PFA_PORTG           0x00000100  /* PF Port G Interrupt A                                    */
#define IRQ_PFB_PORTG           0x00000200  /* PF Port G Interrupt B                                    */
#define IRQ_DMA12               0x00000400  /* DMA Channel 12 (MDMA0 Destination) Rx Interrupt          */
#define IRQ_DMA13               0x00000400  /* DMA Channel 13 (MDMA0 Source) Tx Interrupt               */
#define IRQ_DMA14               0x00000800  /* DMA Channels 14 (MDMA1 Destination) Rx Interrupt         */
#define IRQ_DMA15               0x00000800  /* DMA Channels 15 (MDMA1 Source) Tx Interrupt              */
#define IRQ_WDOG                0x00001000  /* Software Watchdog Timer Interrupt                        */
#define IRQ_PFA_PORTH           0x00002000  /* PF Port H Interrupt A                                    */
#define IRQ_PFB_PORTH           0x00004000  /* PF Port H Interrupt B                                    */
#define IRQ_ACM_ERR             0x00008000  /* Error Interrupt (ACM status interrupt)                   */
#define IRQ_ACM                 0x00010000  /* ACM (ADC Controller Module) Interrupt                    */
                                            /* Bit 49 is reserved                                       */
                                            /* Bit 50 is reserved                                       */
#define IRQ_PWM0_TRIPINT        0x00080000  /* PWM 0 Trip Interrupt                                     */
#define IRQ_PWM0_SYNCINT        0x00100000  /* PWM 0 Sync Interrupt                                     */
#define IRQ_PWM1_TRIPINT        0x00200000  /* PWM 1 Trip Interrupt                                     */
#define IRQ_PWM1_SYNCINT        0x00400000  /* PWM 1 Sync Interrupt                                     */
#define IRQ_RSI_INT1            0x00800000  /* RSI Mask 1 interrupt                                     */
                                            /* Bits 63:56 are reserved                                  */


/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
#define IWR_DISABLE_ALL         0x00000000  /* Wakeup Disable all peripherals                       */
#define IWR_ENABLE_ALL              0xFFFFFFFF  /* Wakeup Enable all peripherals                        */
/* x = pos 0 to 31, for 32-63 use value-32 */
#define IWR_ENABLE(x)               (1 << (x))  /* Wakeup Enable Peripheral #x                      */
#define IWR_DISABLE(x)   (0xFFFFFFFF^(1<<(x)))  /* Wakeup Disable Peripheral #x                         */

#ifdef _MISRA_RULES
#define _MF15   0xFu
#define _MF7    7u
#else
#define _MF15   0xF
#define _MF7    7
#endif /* _MISRA_RULES */


/* SIC_IAR0 Macros*/
#define P0_IVG(x)       (((x)&_MF15)-_MF7)           /* Peripheral #0 assigned IVG #x    */
#define P1_IVG(x)       ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #1 assigned IVG #x    */
#define P2_IVG(x)       ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #2 assigned IVG #x    */
#define P3_IVG(x)       ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #3 assigned IVG #x    */
#define P4_IVG(x)       ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #4 assigned IVG #x    */
#define P5_IVG(x)       ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #5 assigned IVG #x    */
#define P6_IVG(x)       ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #6 assigned IVG #x    */
#define P7_IVG(x)       ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #7 assigned IVG #x    */

/* SIC_IAR1 Macros*/
#define P8_IVG(x)       (((x)&_MF15)-_MF7)           /* Peripheral #8 assigned IVG #x    */
#define P9_IVG(x)       ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #9 assigned IVG #x    */
#define P10_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #10 assigned IVG #x   */
#define P11_IVG(x)                                   /* Reserved                         */
#define P12_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #12 assigned IVG #x   */
#define P13_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #13 assigned IVG #x   */
#define P14_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #14 assigned IVG #x   */
#define P15_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #15 assigned IVG #x   */

/* SIC_IAR2 Macros*/
#define P16_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #16 assigned IVG #x   */
#define P17_IVG(x)      ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #17 assigned IVG #x   */
#define P18_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #18 assigned IVG #x   */
#define P19_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #19 assigned IVG #x   */
#define P20_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #20 assigned IVG #x   */
#define P21_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #21 assigned IVG #x   */
#define P22_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #22 assigned IVG #x   */
#define P23_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #23 assigned IVG #x   */


/* SIC_IAR3 Macros*/
#define P24_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #24 assigned IVG #x   */
#define P25_IVG(x)      ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #25 assigned IVG #x   */
#define P26_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #26 assigned IVG #x   */
#define P27_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #27 assigned IVG #x   */
#define P28_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #28 assigned IVG #x   */
#define P29_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #29 assigned IVG #x   */
#define P30_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #30 assigned IVG #x   */
#define P31_IVG(x)                                   /* Reserved                         */

/* SIC_IAR4 Macros*/
#define P32_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #32 assigned IVG #x   */
#define P33_IVG(x)      ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #33 assigned IVG #x   */
#define P34_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #34 assigned IVG #x   */
#define P35_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #35 assigned IVG #x   */
#define P36_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #36 assigned IVG #x   */
#define P37_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #37 assigned IVG #x   */
#define P38_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #38 assigned IVG #x   */
#define P39_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #39 assigned IVG #x   */

/* SIC_IAR5 Macros*/
#define P40_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #40 assigned IVG #x   */
#define P41_IVG(x)      ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #41 assigned IVG #x   */
#define P42_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #42 assigned IVG #x   */
#define P43_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #43 assigned IVG #x   */
#define P44_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #44 assigned IVG #x   */
#define P45_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #45 assigned IVG #x   */
#define P46_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #46 assigned IVG #x   */
#define P47_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #47 assigned IVG #x   */

/* SIC_IAR6 Macros*/
#define P48_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #48 assigned IVG #x   */
#define P49_IVG(x)                                   /* Reserved                         */
#define P50_IVG(x)                                   /* Reserved                         */
#define P51_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #51 assigned IVG #x   */
#define P52_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #52 assigned IVG #x   */
#define P53_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #53 assigned IVG #x   */
#define P54_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #54 assigned IVG #x   */
#define P55_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #55 assigned IVG #x   */


/* SIC_IMASK0 Masks*/
#define SIC_UNMASK0_ALL 0x00000000              /* Unmask all peripheral interrupts */
#define SIC_MASK0_ALL   0xEFFFF7FF              /* Mask all peripheral interrupts   */

#if 0 /* scheduled for removal */
#ifdef _MISRA_RULES
#define SIC_MASK0(x)    (1 << ((x)&0x1Fu))      /* Mask Peripheral #x interrupt */
#define SIC_UNMASK0(x)  (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu)))/*Unmask Peripheral #x interrupt*/
#else
#define SIC_MASK0(x)    (1 << ((x)&0x1F))           /* Mask Peripheral #x interrupt */
#define SIC_UNMASK0(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))/* Unmask Peripheral #x interrupt   */
#endif /* _MISRA_RULES */
#endif

/* SIC_IMASK1 Masks*/
#define SIC_UNMASK1_ALL 0x00000000              /* Unmask all peripheral interrupts */
#define SIC_MASK1_ALL   0x00F9FFFF              /* Mask all peripheral interrupts   */

#if 0 /* scheduled for removal */
#ifdef _MISRA_RULES
#define SIC_MASK1(x)    (1 << ((x)&0x1Fu))      /* Mask Peripheral #x interrupt */
#define SIC_UNMASK1(x)  (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu)))/*Unmask Peripheral #x interrupt*/
#else
#define SIC_MASK1(x)    (1 << ((x)&0x1F))           /* Mask Peripheral #x interrupt */
#define SIC_UNMASK1(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))/* Unmask Peripheral #x interrupt   */
#endif /* _MISRA_RULES */
#endif


/* SIC_IWR0 Masks*/
#define IWR0_DISABLE_ALL 0x00000000             /* Wakeup Disable all peripherals   */
#define IWR0_ENABLE_ALL  0xEFFFF7FF             /* Wakeup Enable all peripherals    */

#if 0 /* scheduled for removal */
#ifdef _MISRA_RULES
#define IWR0_ENABLE(x)   (1 << ((x)&0x1Fu))     /* Wakeup Enable Peripheral #x  */
#define IWR0_DISABLE(x)  (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu)))/*Wakeup Disable Peripheral #x   */
#else
#define IWR0_ENABLE(x)   (1 << ((x)&0x1F))      /* Wakeup Enable Peripheral #x  */
#define IWR0_DISABLE(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))/* Wakeup Disable Peripheral #x    */
#endif /* _MISRA_RULES */
#endif

/* SIC_IWR1 Masks*/
#define IWR1_DISABLE_ALL 0x00000000             /* Wakeup Disable all peripherals   */
#define IWR1_ENABLE_ALL  0x00F9FFFF             /* Wakeup Enable all peripherals    */

#if 0 /* scheduled for removal */
#ifdef _MISRA_RULES
#define IWR1_ENABLE(x)   (1 << ((x)&0x1Fu))     /* Wakeup Enable Peripheral #x  */
#define IWR1_DISABLE(x)  (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu)))/* Wakeup Disable Peripheral #x*/
#else
#define IWR1_ENABLE(x)   (1 << ((x)&0x1F))      /* Wakeup Enable Peripheral #x  */
#define IWR1_DISABLE(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))/* Wakeup Disable Peripheral #x    */
#endif /* _MISRA_RULES */
#endif


/* ************************************** WATCHDOG TIMER MASKS ****************************************************/

/* Watchdog Timer WDOG_CTL Register Masks */
#ifdef _MISRA_RULES
#define WDEV(x)      (((x)<<1) & 0x0006u)   /* event generated on roll over                         */
#else
#define WDEV(x)         (((x)<<1) & 0x0006) /* event generated on roll over                         */
#endif /* _MISRA_RULES */

#define WDEV_RESET          0x0000  /* generate reset event on roll over                    */
#define WDEV_NMI                0x0002  /* generate NMI event on roll over                      */
#define WDEV_GPI                0x0004  /* generate GP IRQ on roll over                         */
#define WDEV_NONE           0x0006  /* no event on roll over                            */
#define WDEN                0x0FF0  /* enable watchdog                              */
#define WDDIS               0x0AD0  /* disable watchdog                                 */
#define WDRO                0x8000  /* watchdog rolled over latch                       */

/* depreciated WDOG_CTL Register Masks for legacy code */
#define ICTL                (WDEV)
#define ENABLE_RESET            (WDEV_RESET)
#define WDOG_RESET          (WDEV_RESET)
#define ENABLE_NMI          (WDEV_NMI)
#define WDOG_NMI                (WDEV_NMI)
#define ENABLE_GPI          (WDEV_GPI)
#define WDOG_GPI                (WDEV_GPI)
#define DISABLE_EVT             (WDEV_NONE)
#define WDOG_NONE           (WDEV_NONE)

#define TMR_EN              (WDEN)
#define TMR_DIS                 (WDDIS)
#define TRO                 (WDRO)
#define ICTL_P0                 (0x01)
#define ICTL_P1                 (0x02)
#define TRO_P               (0x0F)


/* ************************************ UART CONTROLLER MASKS *****************************************************/

/* Bit masks for UARTx_LCR */

#if 0
/* conflicts with legacy one in last section */
#define                       WLS  0x3        /* Word Length Select */
#endif
#define                       STB  0x4        /* Stop Bits */
#define                      nSTB  0x0
#define                       PEN  0x8        /* Parity Enable */
#define                      nPEN  0x0
#define                       EPS  0x10       /* Even Parity Select */
#define                      nEPS  0x0
#define                       STP  0x20       /* Sticky Parity */
#define                      nSTP  0x0
#define                        SB  0x40       /* Set Break */
#define                       nSB  0x0

/* for legacy compatibility */

#ifdef _MISRA_RULES
#define WLS(x)  (((x)-5u) & 0x03u) /* Word Length Select */
#else
#define WLS(x)  (((x)-5) & 0x03) /* Word Length Select */
#endif /* _MISRA_RULES */

/* Bit masks for UARTx_MCR */

#define                      XOFF  0x1        /* Transmitter Off */
#define                     nXOFF  0x0
#define                      MRTS  0x2        /* Manual Request To Send */
#define                     nMRTS  0x0
#define                      RFIT  0x4        /* Receive FIFO IRQ Threshold */
#define                     nRFIT  0x0
#define                      RFRT  0x8        /* Receive FIFO RTS Threshold */
#define                     nRFRT  0x0
#define                  LOOP_ENA  0x10       /* Loopback Mode Enable */
#define                 nLOOP_ENA  0x0
#define                     FCPOL  0x20       /* Flow Control Pin Polarity */
#define                    nFCPOL  0x0
#define                      ARTS  0x40       /* Automatic Request To Send */
#define                     nARTS  0x0
#define                      ACTS  0x80       /* Automatic Clear To Send */
#define                     nACTS  0x0

/* Bit masks for UARTx_LSR */

#define                        DR  0x1        /* Data Ready */
#define                       nDR  0x0
#define                        OE  0x2        /* Overrun Error */
#define                       nOE  0x0
#define                        PE  0x4        /* Parity Error */
#define                       nPE  0x0
#define                        FE  0x8        /* Framing Error */
#define                       nFE  0x0
#define                        BI  0x10       /* Break Interrupt */
#define                       nBI  0x0
#define                      THRE  0x20       /* THR Empty */
#define                     nTHRE  0x0
#define                      TEMT  0x40       /* Transmitter Empty */
#define                     nTEMT  0x0
#define                       TFI  0x80       /* Transmission Finished Indicator */
#define                      nTFI  0x0

/* Bit masks for UARTx_MSR */

#define                      SCTS  0x1        /* Sticky CTS */
#define                     nSCTS  0x0
#define                       CTS  0x10       /* Clear To Send */
#define                      nCTS  0x0
#define                      RFCS  0x20       /* Receive FIFO Count Status */
#define                     nRFCS  0x0

/* Bit masks for UARTx_IER_SET and UARTx_IER_CLEAR */

#define                     ERBFI  0x1        /* Enable Receive Buffer Full Interrupt */
#define                    nERBFI  0x0
#define                     ETBEI  0x2        /* Enable Transmit Buffer Empty Interrupt */
#define                    nETBEI  0x0
#define                      ELSI  0x4        /* Enable Receive Status Interrupt */
#define                     nELSI  0x0
#define                     EDSSI  0x8        /* Enable Modem Status Interrupt */
#define                    nEDSSI  0x0

#define                      ETFI  0x20       /* Enable Transmission Finished Interrupt */
#define                     nETFI  0x0

#define                     ERFCI  0x40       /* Enable Receive FIFO Count Interrupt */
#define                    nERFCI  0x0


/* Bit masks for UARTx_GCTL */

#define                      UCEN  0x1        /* UART Enable */
#define                     nUCEN  0x0
#define                      IREN  0x2        /* IrDA Mode Enable */
#define                     nIREN  0x0
#define                     TPOLC  0x4        /* IrDA TX Polarity Change */
#define                    nTPOLC  0x0
#define                     RPOLC  0x8        /* IrDA RX Polarity Change */
#define                    nRPOLC  0x0
#define                       FPE  0x10       /* Force Parity Error */
#define                      nFPE  0x0
#define                       FFE  0x20       /* Force Framing Error */
#define                      nFFE  0x0
#define                      EDBO  0x40       /* Enable Divide-by-One */
#define                     nEDBO  0x0
#define                     EGLSI  0x80       /* Enable Global LS Interrupt */
#define                    nEGLSI  0x0

/* UARTx_LCR bit field options */

#define WLS_5   0x0000    /* 5 data bits */
#define WLS_6   0x0001    /* 6 data bits */
#define WLS_7   0x0002    /* 7 data bits */
#define WLS_8   0x0003    /* 8 data bits */


/********************************  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  ***************************************/

/* SPI_CTL Masks*/
#define TIMOD               0x0003  /* Transfer Initiate Mode                           */
#define RDBR_CORE               0x0000  /* RDBR Read Initiates, IRQ When RDBR Full              */
#define TDBR_CORE               0x0001  /* TDBR Write Initiates, IRQ When TDBR Empty                */
#define RDBR_DMA                0x0002  /* DMA Read, DMA Until FIFO Empty                       */
#define TDBR_DMA                0x0003  /* DMA Write, DMA Until FIFO Full                       */
#define SZ                  0x0004  /* Send Zero (When TDBR Empty, Send Zero/Last*)             */
#define GM                  0x0008  /* Get More (When RDBR Full, Overwrite/Discard*)            */
#define PSSE                0x0010  /* Slave-Select Input Enable                            */
#define EMISO               0x0020  /* Enable MISO As Output                            */
#define SIZE                0x0100  /* Size of Words (16/8* Bits)                           */
#define LSBF                0x0200  /* LSB First                                    */
#define CPHA                0x0400  /* Clock Phase                                  */
#define CPOL                0x0800  /* Clock Polarity                                   */
#define MSTR                0x1000  /* Master/Slave*                                    */
#define WOM                 0x2000  /* Write Open Drain Master                          */
#define SPE                 0x4000  /* SPI Enable                                   */

/* SPI_FLG Masks*/
#define FLS1                0x0002  /* Enables SPI_FLOUT1 as SPI Slave-Select Output            */
#define FLS2                0x0004  /* Enables SPI_FLOUT2 as SPI Slave-Select Output            */
#define FLS3                0x0008  /* Enables SPI_FLOUT3 as SPI Slave-Select Output            */
#define FLS4                0x0010  /* Enables SPI_FLOUT4 as SPI Slave-Select Output            */
#define FLS5                0x0020  /* Enables SPI_FLOUT5 as SPI Slave-Select Output            */
#define FLS6                0x0040  /* Enables SPI_FLOUT6 as SPI Slave-Select Output            */
#define FLS7                0x0080  /* Enables SPI_FLOUT7 as SPI Slave-Select Output            */
#define FLG1                0xFDFF  /* Activates SPI_FLOUT1                             */
#define FLG2                0xFBFF  /* Activates SPI_FLOUT2                             */
#define FLG3                0xF7FF  /* Activates SPI_FLOUT3                             */
#define FLG4                0xEFFF  /* Activates SPI_FLOUT4                             */
#define FLG5                0xDFFF  /* Activates SPI_FLOUT5                             */
#define FLG6                0xBFFF  /* Activates SPI_FLOUT6                             */
#define FLG7                0x7FFF  /* Activates SPI_FLOUT7                             */

/* SPI_STAT Masks*/
#define SPIF                0x0001  /* SPI Finished (Single-Word Transfer Complete)             */
#define MODF                0x0002  /* Mode Fault Error (Another Device Tried To Become Master)     */
#define TXE                 0x0004  /* Transmission Error (Data Sent With No New Data In TDBR)      */
#define TXS                 0x0008  /* SPI_TDBR Data Buffer Status (Full/Empty*)                */
#define RBSY                0x0010  /* Receive Error (Data Received With RDBR Full)             */
#define RXS                 0x0020  /* SPI_RDBR Data Buffer Status (Full/Empty*)                */
#define TXCOL               0x0040  /* Transmit Collision Error (Corrupt Data May Have Been Sent)   */


/***********************************  GENERAL PURPOSE TIMER MASKS  ************************************************/
/* TIMER_ENABLE Masks*/
#define TIMEN0              0x0001  /* Enable Timer 0                                   */
#define TIMEN1              0x0002  /* Enable Timer 1                                   */
#define TIMEN2              0x0004  /* Enable Timer 2                                   */
#define TIMEN3              0x0008  /* Enable Timer 3                                   */
#define TIMEN4              0x0010  /* Enable Timer 4                                   */
#define TIMEN5              0x0020  /* Enable Timer 5                                   */
#define TIMEN6              0x0040  /* Enable Timer 6                                   */
#define TIMEN7              0x0080  /* Enable Timer 7                                   */

/* TIMER_DISABLE Masks*/
#define TIMDIS0             (TIMEN0)  /* Disable Timer 0                              */
#define TIMDIS1             (TIMEN1)  /* Disable Timer 1                              */
#define TIMDIS2             (TIMEN2)  /* Disable Timer 2                              */
#define TIMDIS3             (TIMEN3)  /* Disable Timer 3                              */
#define TIMDIS4             (TIMEN4)  /* Disable Timer 4                              */
#define TIMDIS5             (TIMEN5)  /* Disable Timer 5                              */
#define TIMDIS6             (TIMEN6)  /* Disable Timer 6                              */
#define TIMDIS7             (TIMEN7)  /* Disable Timer 7                              */

/* TIMER_STATUS Masks*/
#define TIMIL0              0x00000001  /* Timer 0 Interrupt                                */
#define TIMIL1              0x00000002  /* Timer 1 Interrupt                                */
#define TIMIL2              0x00000004  /* Timer 2 Interrupt                                */
#define TIMIL3              0x00000008  /* Timer 3 Interrupt                                */
#define TOVF_ERR0               0x00000010  /* Timer 0 Counter Overflow                         */
#define TOVF_ERR1               0x00000020  /* Timer 1 Counter Overflow                         */
#define TOVF_ERR2               0x00000040  /* Timer 2 Counter Overflow                         */
#define TOVF_ERR3               0x00000080  /* Timer 3 Counter Overflow                         */
#define TRUN0               0x00001000  /* Timer 0 Slave Enable Status                      */
#define TRUN1               0x00002000  /* Timer 1 Slave Enable Status                      */
#define TRUN2               0x00004000  /* Timer 2 Slave Enable Status                      */
#define TRUN3               0x00008000  /* Timer 3 Slave Enable Status                      */
#define TIMIL4              0x00010000  /* Timer 4 Interrupt                                */
#define TIMIL5              0x00020000  /* Timer 5 Interrupt                                */
#define TIMIL6              0x00040000  /* Timer 6 Interrupt                                */
#define TIMIL7              0x00080000  /* Timer 7 Interrupt                                */
#define TOVF_ERR4               0x00100000  /* Timer 4 Counter Overflow                         */
#define TOVF_ERR5               0x00200000  /* Timer 5 Counter Overflow                         */
#define TOVF_ERR6               0x00400000  /* Timer 6 Counter Overflow                         */
#define TOVF_ERR7               0x00800000  /* Timer 7 Counter Overflow                         */
#define TRUN4               0x10000000  /* Timer 4 Slave Enable Status                      */
#define TRUN5               0x20000000  /* Timer 5 Slave Enable Status                      */
#define TRUN6               0x40000000  /* Timer 6 Slave Enable Status                      */
#define TRUN7               0x80000000  /* Timer 7 Slave Enable Status                      */

/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
#define TOVL_ERR0           (TOVF_ERR0)
#define TOVL_ERR1               (TOVF_ERR1)
#define TOVL_ERR2           (TOVF_ERR2)
#define TOVL_ERR3           (TOVF_ERR3)
#define TOVL_ERR4           (TOVF_ERR4)
#define TOVL_ERR5           (TOVF_ERR5)
#define TOVL_ERR6           (TOVF_ERR6)
#define TOVL_ERR7           (TOVF_ERR7)

/* TIMERx_CONFIG Masks */
#define PWM_OUT             0x0001  /* Pulse-Width Modulation Output Mode                   */
#define WDTH_CAP                0x0002  /* Width Capture Input Mode                         */
#define EXT_CLK             0x0003  /* External Clock Mode                              */
#define PULSE_HI                0x0004  /* Action Pulse (Positive/Negative*)                    */
#define PERIOD_CNT          0x0008  /* Period Count                                 */
#define IRQ_ENA             0x0010  /* Interrupt Request Enable                         */
#define TIN_SEL             0x0020  /* Timer Input Select                               */
#define OUT_DIS             0x0040  /* Output Pad Disable                               */
#define CLK_SEL             0x0080  /* Timer Clock Select                               */
#define TOGGLE_HI               0x0100  /* PWM_OUT PULSE_HI Toggle Mode                     */
#define EMU_RUN             0x0200  /* Emulation Behavior Select                            */
#define ERR_TYP             0xC000  /* Error Type                                   */


/* *************************************   GPIO PORTS F, G, H MASKS  **********************************************/

/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
/* Port F Masks */
#define PF0                 0x0001
#define PF1                 0x0002
#define PF2                 0x0004
#define PF3                 0x0008
#define PF4                 0x0010
#define PF5                 0x0020
#define PF6                 0x0040
#define PF7                 0x0080
#define PF8                 0x0100
#define PF9                 0x0200
#define PF10                0x0400
#define PF11                0x0800
#define PF12                0x1000
#define PF13                0x2000
#define PF14                0x4000
#define PF15                0x8000

/* Port G Masks */
#define PG0                 0x0001
#define PG1                 0x0002
#define PG2                 0x0004
#define PG3                 0x0008
#define PG4                 0x0010
#define PG5                 0x0020
#define PG6                 0x0040
#define PG7                 0x0080
#define PG8                 0x0100
#define PG9                 0x0200
#define PG10                0x0400
#define PG11                0x0800
#define PG12                0x1000
#define PG13                0x2000
#define PG14                0x4000
#define PG15                0x8000

/* Port H Masks */
#define PH0                 0x0001
#define PH1                 0x0002
#define PH2                 0x0004


/* **************************************  SERIAL PORT MASKS  *****************************************************/
/* SPORTx_TCR1 Masks */
#define TSPEN               0x0001  /* Transmit Enable                              */
#define ITCLK               0x0002  /* Internal Transmit Clock Select                       */
#define DTYPE_NORM          0x0004  /* Data Format Normal                               */
#define DTYPE_ULAW          0x0008  /* Compand Using u-Law                              */
#define DTYPE_ALAW          0x000C  /* Compand Using A-Law                              */
#define TLSBIT              0x0010  /* Transmit Bit Order                               */
#define ITFS                0x0200  /* Internal Transmit Frame Sync Select                  */
#define TFSR                0x0400  /* Transmit Frame Sync Required Select                  */
#define DITFS               0x0800  /* Data-Independent Transmit Frame Sync Select              */
#define LTFS                0x1000  /* Low Transmit Frame Sync Select                       */
#define LATFS               0x2000  /* Late Transmit Frame Sync Select                      */
#define TCKFE               0x4000  /* Clock Falling Edge Select                            */

/* SPORTx_TCR2 Masks and Macro */
#ifdef _MISRA_RULES
#define SLEN(x)             ((x)&0x1Fu) /* SPORT TX Word Length (2 - 31)                        */
#else
#define SLEN(x)             ((x)&0x1F)  /* SPORT TX Word Length (2 - 31)                        */
#endif /* _MISRA_RULES */

#define TXSE                0x0100  /* TX Secondary Enable                              */
#define TSFSE               0x0200  /* Transmit Stereo Frame Sync Enable                    */
#define TRFST               0x0400  /* Left/Right Order (1 = Right Channel 1st)             */

/* SPORTx_RCR1 Masks */
#define RSPEN               0x0001  /* Receive Enable                               */
#define IRCLK               0x0002  /* Internal Receive Clock Select                        */
#define DTYPE_NORM          0x0004  /* Data Format Normal                               */
#define DTYPE_ULAW          0x0008  /* Compand Using u-Law                              */
#define DTYPE_ALAW          0x000C  /* Compand Using A-Law                              */
#define RLSBIT              0x0010  /* Receive Bit Order                                */
#define IRFS                0x0200  /* Internal Receive Frame Sync Select                   */
#define RFSR                0x0400  /* Receive Frame Sync Required Select                   */
#define LRFS                0x1000  /* Low Receive Frame Sync Select                        */
#define LARFS               0x2000  /* Late Receive Frame Sync Select                       */
#define RCKFE               0x4000  /* Clock Falling Edge Select                            */

/* SPORTx_RCR2 Masks */
#ifdef _MISRA_RULES
#define SLEN(x)             ((x)&0x1Fu) /* SPORT RX Word Length (2 - 31)                        */
#else
#define SLEN(x)             ((x)&0x1F)  /* SPORT RX Word Length (2 - 31)                        */
#endif /* _MISRA_RULES */

#define RXSE                0x0100  /* RX Secondary Enable                              */
#define RSFSE               0x0200  /* RX Stereo Frame Sync Enable                      */
#define RRFST               0x0400  /* Right-First Data Order                           */

/* SPORTx_STAT Masks */
#define RXNE                0x0001  /* Receive FIFO Not Empty Status                        */
#define RUVF                0x0002  /* Sticky Receive Underflow Status                      */
#define ROVF                0x0004  /* Sticky Receive Overflow Status                       */
#define TXF                 0x0008  /* Transmit FIFO Full Status                            */
#define TUVF                0x0010  /* Sticky Transmit Underflow Status                     */
#define TOVF                0x0020  /* Sticky Transmit Overflow Status                      */
#define TXHRE               0x0040  /* Transmit Hold Register Empty                     */

/* SPORTx_MCMC1 Macros */
#ifdef _MISRA_RULES
#define WOFF(x)     ((x) & 0x3FFu)      /* Multichannel Window Offset Field                     */
/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits*/
#define WSIZE(x)        (((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1               */
#else
#define WOFF(x)     ((x) & 0x3FF)       /* Multichannel Window Offset Field                     */
/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits                                */
#define WSIZE(x)    (((((x)>>0x3)-1)&0xF) << 0xC)   /* Multichannel Window Size = (x/8)-1                   */
#endif /* _MISRA_RULES */

/* SPORTx_MCMC2 Masks */
#define REC_BYPASS          0x0000  /* Bypass Mode (No Clock Recovery)                      */
#define REC_2FROM4          0x0002  /* Recover 2 MHz Clock from 4 MHz Clock                 */
#define REC_8FROM16         0x0003  /* Recover 8 MHz Clock from 16 MHz Clock                    */
#define MCDTXPE             0x0004  /* Multichannel DMA Transmit Packing                    */
#define MCDRXPE             0x0008  /* Multichannel DMA Receive Packing                     */
#define MCMEN               0x0010  /* Multichannel Frame Mode Enable                       */
#define FSDR                0x0080  /* Multichannel Frame Sync to Data Relationship             */
#define MFD_0               0x0000  /* Multichannel Frame Delay = 0                     */
#define MFD_1               0x1000  /* Multichannel Frame Delay = 1                     */
#define MFD_2               0x2000  /* Multichannel Frame Delay = 2                     */
#define MFD_3               0x3000  /* Multichannel Frame Delay = 3                     */
#define MFD_4               0x4000  /* Multichannel Frame Delay = 4                     */
#define MFD_5               0x5000  /* Multichannel Frame Delay = 5                     */
#define MFD_6               0x6000  /* Multichannel Frame Delay = 6                     */
#define MFD_7               0x7000  /* Multichannel Frame Delay = 7                     */
#define MFD_8               0x8000  /* Multichannel Frame Delay = 8                     */
#define MFD_9               0x9000  /* Multichannel Frame Delay = 9                     */
#define MFD_10              0xA000  /* Multichannel Frame Delay = 10                        */
#define MFD_11              0xB000  /* Multichannel Frame Delay = 11                        */
#define MFD_12              0xC000  /* Multichannel Frame Delay = 12                        */
#define MFD_13              0xD000  /* Multichannel Frame Delay = 13                        */
#define MFD_14              0xE000  /* Multichannel Frame Delay = 14                        */
#define MFD_15              0xF000  /* Multichannel Frame Delay = 15                        */


/***********************************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ***************************************/

/* EBIU_AMGCTL Masks */
#define AMCKEN                  0x0001  /* Enable CLKOUT                                         */
#define AMBEN                   0x0002  /* Enable Asynchronous memory bank                       */
#define AMBEN_NONE              0x0000  /* All Banks Disabled                                    */

#define AMBEN_B0        (AMBEN) /* Enable Async Memory Bank 0 only          */

#define AMBEN_ALL               0x0002  /* Enable Asynchronous memory bank                       */
#define CDPRIO                  0x0100  /* DMA has priority over core for for external accesses  */

/* EBIU_AMBCTL Masks */
#define RDYEN               0x00000001  /* ARDY Enable                                           */
#define RDYPOL              0x00000002  /* RDY Active High                                       */
#define TT_1                0x00000004  /* Transition Time (Read to Write) = 1 cycle             */
#define TT_2                0x00000008  /* Transition Time (Read to Write) = 2 cycles            */
#define TT_3                0x0000000C  /* Transition Time (Read to Write) = 3 cycles            */
#define TT_4                0x00000000  /* Transition Time (Read to Write) = 4 cycles            */
#define ST_1                0x00000010  /* Setup Time (AOE to Read/Write) = 1 cycle              */
#define ST_2                0x00000020  /* Setup Time (AOE to Read/Write) = 2 cycles             */
#define ST_3                0x00000030  /* Setup Time (AOE to Read/Write) = 3 cycles             */
#define ST_4                0x00000000  /* Setup Time (AOE to Read/Write) = 4 cycles             */
#define HT_1                0x00000040  /* Hold Time (~Read/Write to ~AOE) = 1 cycle             */
#define HT_2                0x00000080  /* Hold Time (~Read/Write to ~AOE) = 2 cycles            */
#define HT_3                0x000000C0  /* Hold Time (~Read/Write to ~AOE) = 3 cycles            */
#define HT_0                0x00000000  /* Hold Time (~Read/Write to ~AOE) = 0 cycles            */
#define RAT_1               0x00000100  /* Read Access Time = 1 cycle                            */
#define RAT_2               0x00000200  /* Read Access Time = 2 cycles                           */
#define RAT_3               0x00000300  /* Read Access Time = 3 cycles                           */
#define RAT_4               0x00000400  /* Read Access Time = 4 cycles                           */
#define RAT_5               0x00000500  /* Read Access Time = 5 cycles                           */
#define RAT_6               0x00000600  /* Read Access Time = 6 cycles                           */
#define RAT_7               0x00000700  /* Read Access Time = 7 cycles                           */
#define RAT_8               0x00000800  /* Read Access Time = 8 cycles                           */
#define RAT_9               0x00000900  /* Read Access Time = 9 cycles                           */
#define RAT_10              0x00000A00  /* Read Access Time = 10 cycles                          */
#define RAT_11              0x00000B00  /* Read Access Time = 11 cycles                          */
#define RAT_12              0x00000C00  /* Read Access Time = 12 cycles                          */
#define RAT_13              0x00000D00  /* Read Access Time = 13 cycles                          */
#define RAT_14              0x00000E00  /* Read Access Time = 14 cycles                          */
#define RAT_15              0x00000F00  /* Read Access Time = 15 cycles                          */
#define WAT_1               0x00001000  /* Write Access Time = 1 cycle                           */
#define WAT_2               0x00002000  /* Write Access Time = 2 cycles                          */
#define WAT_3               0x00003000  /* Write Access Time = 3 cycles                          */
#define WAT_4               0x00004000  /* Write Access Time = 4 cycles                          */
#define WAT_5               0x00005000  /* Write Access Time = 5 cycles                          */
#define WAT_6               0x00006000  /* Write Access Time = 6 cycles                          */
#define WAT_7               0x00007000  /* Write Access Time = 7 cycles                          */
#define WAT_8               0x00008000  /* Write Access Time = 8 cycles                          */
#define WAT_9               0x00009000  /* Write Access Time = 9 cycles                          */
#define WAT_10              0x0000A000  /* Write Access Time = 10 cycles                         */
#define WAT_11              0x0000B000  /* Write Access Time = 11 cycles                         */
#define WAT_12              0x0000C000  /* Write Access Time = 12 cycles                         */
#define WAT_13              0x0000D000  /* Write Access Time = 13 cycles                         */
#define WAT_14              0x0000E000  /* Write Access Time = 14 cycles                         */
#define WAT_15              0x0000F000  /* Write Access Time = 15 cycles                         */

/* EBIU_AMBCTL0 Masks */
#define B0RDYEN             (RDYEN)     /* Bank 0 (B0) RDY Enable                                */
#define B0RDYPOL            (RDYPOL)    /* B0 RDY Active High                                    */
#define B0TT_1              (TT_1)      /* B0 Transition Time (Read to Write) = 1 cycle          */
#define B0TT_2              (TT_2)      /* B0 Transition Time (Read to Write) = 2 cycles         */
#define B0TT_3              (TT_3)      /* B0 Transition Time (Read to Write) = 3 cycles         */
#define B0TT_4              (TT_4)      /* B0 Transition Time (Read to Write) = 4 cycles         */
#define B0ST_1              (ST_1)      /* B0 Setup Time (AOE to Read/Write) = 1 cycle           */
#define B0ST_2              (ST_2)      /* B0 Setup Time (AOE to Read/Write) = 2 cycles          */
#define B0ST_3              (ST_3)      /* B0 Setup Time (AOE to Read/Write) = 3 cycles          */
#define B0ST_4              (ST_4)      /* B0 Setup Time (AOE to Read/Write) = 4 cycles          */
#define B0HT_1              (HT_1)      /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle          */
#define B0HT_2              (HT_2)      /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles         */
#define B0HT_3              (HT_3)      /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles         */
#define B0HT_0              (HT_0)      /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles         */
#define B0RAT_1             (RAT_1)     /* B0 Read Access Time = 1 cycle                         */
#define B0RAT_2             (RAT_2)     /* B0 Read Access Time = 2 cycles                        */
#define B0RAT_3             (RAT_3)     /* B0 Read Access Time = 3 cycles                        */
#define B0RAT_4             (RAT_4)     /* B0 Read Access Time = 4 cycles                        */
#define B0RAT_5             (RAT_5)     /* B0 Read Access Time = 5 cycles                        */
#define B0RAT_6             (RAT_6)     /* B0 Read Access Time = 6 cycles                        */
#define B0RAT_7             (RAT_7)     /* B0 Read Access Time = 7 cycles                        */
#define B0RAT_8             (RAT_8)     /* B0 Read Access Time = 8 cycles                        */
#define B0RAT_9             (RAT_9)     /* B0 Read Access Time = 9 cycles                        */
#define B0RAT_10            (RAT_10)    /* B0 Read Access Time = 10 cycles                       */
#define B0RAT_11            (RAT_11)    /* B0 Read Access Time = 11 cycles                       */
#define B0RAT_12            (RAT_12)    /* B0 Read Access Time = 12 cycles                       */
#define B0RAT_13            (RAT_13)    /* B0 Read Access Time = 13 cycles                       */
#define B0RAT_14            (RAT_14)    /* B0 Read Access Time = 14 cycles                       */
#define B0RAT_15            (RAT_15)    /* B0 Read Access Time = 15 cycles                       */
#define B0WAT_1             (WAT_1)     /* B0 Write Access Time = 1 cycle                        */
#define B0WAT_2             (WAT_2)     /* B0 Write Access Time = 2 cycles                       */
#define B0WAT_3             (WAT_3)     /* B0 Write Access Time = 3 cycles                       */
#define B0WAT_4             (WAT_4)     /* B0 Write Access Time = 4 cycles                       */
#define B0WAT_5             (WAT_5)     /* B0 Write Access Time = 5 cycles                       */
#define B0WAT_6             (WAT_6)     /* B0 Write Access Time = 6 cycles                       */
#define B0WAT_7             (WAT_7)     /* B0 Write Access Time = 7 cycles                       */
#define B0WAT_8             (WAT_8)     /* B0 Write Access Time = 8 cycles                       */
#define B0WAT_9             (WAT_9)     /* B0 Write Access Time = 9 cycles                       */
#define B0WAT_10            (WAT_10)    /* B0 Write Access Time = 10 cycles                      */
#define B0WAT_11            (WAT_11)    /* B0 Write Access Time = 11 cycles                      */
#define B0WAT_12            (WAT_12)    /* B0 Write Access Time = 12 cycles                      */
#define B0WAT_13            (WAT_13)    /* B0 Write Access Time = 13 cycles                      */
#define B0WAT_14            (WAT_14)    /* B0 Write Access Time = 14 cycles                      */
#define B0WAT_15            (WAT_15)    /* B0 Write Access Time = 15 cycles                      */


/* Bit masks for EBIU_MODE */

#define B0MODE              0x3         /* Async Memory Bank Access Mode                         */

/* Bit masks for EBIU_MODE */
#define MODE_ASYNC          0x00000000  /* Access Mode - 00 - Asynchronous Mode                  */
#define MODE_FLASH          0x00000001  /* Access Mode - 01 - Asynchronous Flash Mode            */
#define MODE_BURST          0x00000003  /* Access Mode - 11 - Synchronous (Burst) Mode           */

/* legacy bit fields (below) provided for backwards code compatibility */
#define B0MODE_ASYNC          (MODE_ASYNC)
#define B0MODE_FLASH          (MODE_FLASH)
#define B0MODE_BURST          (MODE_BURST)

/* Bit masks for EBIU_FCTL (BCLK) */
#define BCLK2               0x00000002  /* Burst clock frequency: 01 - SCLK/2                    */
#define BCLK3               0x00000004  /* Burst clock frequency: 10 - SCLK/3                    */
#define BCLK4               0x00000006  /* Burst clock frequency: 11 - SCLK/4                    */


/****************************************  DMA CONTROLLER MASKS  **************************************************/

/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
#define DMAEN               0x0001  /* DMA Channel Enable                               */
#define WNR                 0x0002  /* Channel Direction (W/R*)                         */
#define WDSIZE_8                0x0000  /* Transfer Word Size = 8                           */
#define WDSIZE_16               0x0004  /* Transfer Word Size = 16                          */
#define WDSIZE_32               0x0008  /* Transfer Word Size = 32                          */
#define DMA2D               0x0010  /* DMA Mode (2D/1D*)                                */
#define SYNC                0x0020  /* DMA Buffer Clear                             */
#define DI_SEL              0x0040  /* Data Interrupt Timing Select                     */
#define DI_EN               0x0080  /* Data Interrupt Enable                            */
#define NDSIZE_0                0x0000  /* Next Descriptor Size = 0 (Stop/Autobuffer)               */
#define NDSIZE_1                0x0100  /* Next Descriptor Size = 1                         */
#define NDSIZE_2                0x0200  /* Next Descriptor Size = 2                         */
#define NDSIZE_3                0x0300  /* Next Descriptor Size = 3                         */
#define NDSIZE_4                0x0400  /* Next Descriptor Size = 4                         */
#define NDSIZE_5                0x0500  /* Next Descriptor Size = 5                         */
#define NDSIZE_6                0x0600  /* Next Descriptor Size = 6                         */
#define NDSIZE_7                0x0700  /* Next Descriptor Size = 7                         */
#define NDSIZE_8                0x0800  /* Next Descriptor Size = 8                         */
#define NDSIZE_9                0x0900  /* Next Descriptor Size = 9                         */
#define FLOW_STOP               0x0000  /* Stop Mode                                    */
#define FLOW_AUTO               0x1000  /* Autobuffer Mode                              */
#define FLOW_ARRAY          0x4000  /* Descriptor Array Mode                            */
#define FLOW_SMALL          0x6000  /* Small Model Descriptor List Mode                     */
#define FLOW_LARGE          0x7000  /* Large Model Descriptor List Mode                     */

/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE                   0x0040  /* DMA Channel Type Indicator (Memory/Peripheral)        */
#define PMAP                    0xF000  /* Peripheral Mapped To This Channel                     */
#define PMAP_PPI                0x0000  /* PPI Port DMA                                          */
#define PMAP_RSI                0x1000  /* RSI DMA                                               */
#define PMAP_SPORT0RX           0x2000  /* SPORT0 Receive DMA                                    */
#define PMAP_SPORT0TX           0x3000  /* SPORT0 Transmit DMA                                   */
#define PMAP_SPORT1RX           0x4000  /* SPORT1 Receive DMA                                    */
#define PMAP_SPORT1TX           0x5000  /* SPORT1 Transmit DMA                                   */
#define PMAP_SPI0               0x6000  /* SPI0 Transmit/Receive DMA                             */
#define PMAP_SPI1               0x7000  /* SPI1 Transmit/Receive DMA                             */
#define PMAP_UART0RX            0x8000  /* UART0 Port Receive DMA                                */
#define PMAP_UART0TX            0x9000  /* UART0 Port Transmit DMA                               */
#define PMAP_UART1RX            0xA000  /* UART1 Port Receive DMA                                */
#define PMAP_UART1TX            0xB000  /* UART1 Port Transmit DMA                               */

/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
#define DMA_DONE                0x0001  /* DMA Completion Interrupt Status                      */
#define DMA_ERR             0x0002  /* DMA Error Interrupt Status                           */
#define DFETCH              0x0004  /* DMA Descriptor Fetch Indicator                       */
#define DMA_RUN             0x0008  /* DMA Channel Running Indicator                        */


/*********************************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************************************/

/*  PPI_CONTROL Masks */
#define PORT_EN             0x0001  /* PPI Port Enable                              */
#define PORT_DIR                0x0002  /* PPI Port Direction                               */
#define XFR_TYPE                0x000C  /* PPI Transfer Type                                */
#define PORT_CFG                0x0030  /* PPI Port Configuration                           */
#define FLD_SEL             0x0040  /* PPI Active Field Select                          */
#define PACK_EN             0x0080  /* PPI Packing Mode                             */ /* previous versions of defBF532.h erroneously included DMA32 (PPI 32-bit DMA Enable) */
#define SKIP_EN             0x0200  /* PPI Skip Element Enable                          */
#define SKIP_EO             0x0400  /* PPI Skip Even/Odd Elements                           */
#define DLEN_8              0x0000  /* Data Length = 8 Bits                             */
#define DLEN_10             0x0800  /* Data Length = 10 Bits                            */
#define DLEN_11             0x1000  /* Data Length = 11 Bits                            */
#define DLEN_12             0x1800  /* Data Length = 12 Bits                            */
#define DLEN_13             0x2000  /* Data Length = 13 Bits                            */
#define DLEN_14             0x2800  /* Data Length = 14 Bits                            */
#define DLEN_15             0x3000  /* Data Length = 15 Bits                            */
#define DLEN_16             0x3800  /* Data Length = 16 Bits                            */
#define POLC                0x4000  /* PPI Clock Polarity                               */
#define POLS                0x8000  /* PPI Frame Sync Polarity                          */

/* PPI_STATUS Masks */
#define LT_ERR_OVR          0x0100  /* Line Track Overflow Error                            */
#define LT_ERR_UNDR         0x0200  /* Line Track Underflow Error                           */
#define FLD                 0x0400  /* Field Indicator                              */
#define FT_ERR              0x0800  /* Frame Track Error                                */
#define OVR                 0x1000  /* FIFO Overflow Error                              */
#define UNDR                0x2000  /* FIFO Underrun Error                              */
#define ERR_DET             0x4000  /* Error Detected Indicator                         */
#define ERR_NCOR                0x8000  /* Error Not Corrected Indicator                        */


/***************************************  TWO-WIRE INTERFACE (TWI) MASKS  *****************************************/

/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  ) */
#ifdef _MISRA_RULES
#define CLKLOW(x)               ((x) & 0xFFu)/* Periods Clock Is Held Low                           */
#define CLKHI(y)                (((y)&0xFFu)<<0x8)/* Periods Before New Clock Low                   */
#else
#define CLKLOW(x)               ((x) & 0xFF)/* Periods Clock Is Held Low                            */
#define CLKHI(y)                (((y)&0xFF)<<0x8)   /* Periods Before New Clock Low                 */
#endif /* _MISRA_RULES */

/* TWI_PRESCALE Masks */
#define PRESCALE                0x007F  /* SCLKs Per Internal Time Reference (10MHz)                */
#define TWI_ENA             0x0080  /* TWI Enable                                   */
#define SCCB                0x0200  /* SCCB Compatibility Enable                            */

/* TWI_SLAVE_CTRL Masks */
#define SEN                 0x0001  /* Slave Enable                                 */
#define SADD_LEN                0x0002  /* Slave Address Length                             */
#define STDVAL              0x0004  /* Slave Transmit Data Valid                            */
#define NAK                 0x0008  /* NAK/ACK* Generated At Conclusion Of Transfer             */
#define GEN                 0x0010  /* General Call Adrress Matching Enabled                    */

/* TWI_SLAVE_STAT Masks */
#define SDIR                0x0001  /* Slave Transfer Direction (Transmit/Receive*)             */
#define GCALL               0x0002  /* General Call Indicator                           */

/* TWI_MASTER_CTRL Masks */
#define MEN                 0x0001  /* Master Mode Enable                               */
#define MADD_LEN                0x0002  /* Master Address Length                            */
#define MDIR                0x0004  /* Master Transmit Direction (RX/TX*)                   */
#define FAST                0x0008  /* Use Fast Mode Timing Specs                           */
#define STOP                0x0010  /* Issue Stop Condition                             */
#define RSTART              0x0020  /* Repeat Start or Stop* At End Of Transfer             */
#define DCNT                0x3FC0  /* Data Bytes To Transfer                           */
#define SDAOVR              0x4000  /* Serial Data Override                             */
#define SCLOVR              0x8000  /* Serial Clock Override                            */

/* TWI_MASTER_STAT Masks */
#define MPROG               0x0001  /* Master Transfer In Progress                      */
#define LOSTARB             0x0002  /* Lost Arbitration Indicator (Xfer Aborted)                */
#define ANAK                0x0004  /* Address Not Acknowledged                         */
#define DNAK                0x0008  /* Data Not Acknowledged                            */
#define BUFRDERR                0x0010  /* Buffer Read Error                                */
#define BUFWRERR                0x0020  /* Buffer Write Error                               */
#define SDASEN              0x0040  /* Serial Data Sense                                */
#define SCLSEN              0x0080  /* Serial Clock Sense                               */
#define BUSBUSY             0x0100  /* Bus Busy Indicator                               */

/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
#define SINIT               0x0001  /* Slave Transfer Initiated                         */
#define SCOMP               0x0002  /* Slave Transfer Complete                          */
#define SERR                0x0004  /* Slave Transfer Error                             */
#define SOVF                0x0008  /* Slave Overflow                                   */
#define MCOMP               0x0010  /* Master Transfer Complete                         */
#define MERR                0x0020  /* Master Transfer Error                            */
#define XMTSERV             0x0040  /* Transmit FIFO Service                            */
#define RCVSERV             0x0080  /* Receive FIFO Service                             */

/* TWI_FIFO_CTRL Masks */
#define XMTFLUSH                0x0001  /* Transmit Buffer Flush                            */
#define RCVFLUSH                0x0002  /* Receive Buffer Flush                             */
#define XMTINTLEN               0x0004  /* Transmit Buffer Interrupt Length                     */
#define RCVINTLEN               0x0008  /* Receive Buffer Interrupt Length                      */

/* TWI_FIFO_STAT Masks */
#define XMTSTAT             0x0003  /* Transmit FIFO Status                             */
#define XMT_EMPTY               0x0000  /* Transmit FIFO Empty                              */
#define XMT_HALF                0x0001  /* Transmit FIFO Has 1 Byte To Write                    */
#define XMT_FULL                0x0003  /* Transmit FIFO Full (2 Bytes To Write)                    */

#define RCVSTAT             0x000C  /* Receive FIFO Status                              */
#define RCV_EMPTY               0x0000  /* Receive FIFO Empty                               */
#define RCV_HALF                0x0004  /* Receive FIFO Has 1 Byte To Read                      */
#define RCV_FULL                0x000C  /* Receive FIFO Full (2 Bytes To Read)                  */


/*************************************  STACKED FLASH REGISTER MASKS AND DEFINITIONS ******************************/

#define FLASH_ENABLE            0x0001  /* Enable stacked flash for reads/writes or reset flash  */
#define FLASH_UNPROTECT         0x0100  /* Protect/unprotect stacked flash from programming/erase */
#define FLASH_UNLOCK            0x8000  /* Enable/disable the setting of the upper byte of FLASH_CONTROL */

#define FLASH_BASE_ADDRESS 0x20000000



/****************************************   COUNTER MASKS    ******************************************************/

/* Bit masks for CNT_CONFIG */
#define CNTE                0x1        /* Counter Enable                                    */
#define nCNTE               0x0
#define DEBE                0x2        /* Debounce Enable                               */
#define nDEBE               0x0
#define CDGINV                  0x10       /* CDG Pin Polarity Invert                           */
#define nCDGINV                 0x0
#define CUDINV                  0x20       /* CUD Pin Polarity Invert                           */
#define nCUDINV                 0x0
#define CZMINV                  0x40       /* CZM Pin Polarity Invert                           */
#define nCZMINV                 0x0
#define CNTMODE                 0x700      /* Counter Operating Mode                            */
#define ZMZC                0x800      /* CZM Zeroes Counter Enable                             */
#define nZMZC               0x0
#define BNDMODE                 0x3000     /* Boundary register Mode                            */
#define INPDIS                  0x8000     /* CUG and CDG Input Disable                             */
#define nINPDIS                 0x0

/* Bit masks for CNT_IMASK */
#define ICIE                0x1        /* Illegal Gray/Binary Code Interrupt Enable                 */
#define nICIE               0x0
#define UCIE                0x2        /* Up count Interrupt Enable                             */
#define nUCIE               0x0
#define DCIE                0x4        /* Down count Interrupt Enable                       */
#define nDCIE               0x0
#define MINCIE                  0x8        /* Min Count Interrupt Enable                            */
#define nMINCIE                 0x0
#define MAXCIE                  0x10       /* Max Count Interrupt Enable                            */
#define nMAXCIE                 0x0
#define COV31IE                 0x20       /* Bit 31 Overflow Interrupt Enable                      */
#define nCOV31IE            0x0
#define COV15IE                 0x40       /* Bit 15 Overflow Interrupt Enable                      */
#define nCOV15IE            0x0
#define CZEROIE                 0x80       /* Count to Zero Interrupt Enable                        */
#define nCZEROIE            0x0
#define CZMIE               0x100      /* CZM Pin Interrupt Enable                          */
#define nCZMIE              0x0
#define CZMEIE                  0x200      /* CZM Error Interrupt Enable                            */
#define nCZMEIE                 0x0
#define CZMZIE                  0x400      /* CZM Zeroes Counter Interrupt Enable                   */
#define nCZMZIE                 0x0

/* Bit masks for CNT_STATUS */
#define ICII                0x1        /* Illegal Gray/Binary Code Interrupt Identifier             */
#define nICII               0x0
#define UCII                0x2        /* Up count Interrupt Identifier                         */
#define nUCII               0x0
#define DCII                0x4        /* Down count Interrupt Identifier                       */
#define nDCII               0x0
#define MINCII                  0x8        /* Min Count Interrupt Identifier                        */
#define nMINCII                 0x0
#define MAXCII                  0x10       /* Max Count Interrupt Identifier                        */
#define nMAXCII                 0x0
#define COV31II                 0x20       /* Bit 31 Overflow Interrupt Identifier                  */
#define nCOV31II            0x0
#define COV15II                 0x40       /* Bit 15 Overflow Interrupt Identifier                  */
#define nCOV15II            0x0
#define CZEROII                 0x80       /* Count to Zero Interrupt Identifier                    */
#define nCZEROII            0x0
#define CZMII               0x100      /* CZM Pin Interrupt Identifier                      */
#define nCZMII                  0x0
#define CZMEII                  0x200      /* CZM Error Interrupt Identifier                        */
#define nCZMEII                 0x0
#define CZMZII                  0x400      /* CZM Zeroes Counter Interrupt Identifier               */
#define nCZMZII                 0x0

/* Bit masks for CNT_COMMAND */
#define W1LCNT                  0xf        /* Load Counter Register                             */
#define W1LMIN                  0xf0       /* Load Min Register                                 */
#define W1LMAX                  0xf00      /* Load Max Register                                 */
#define W1ZMONCE            0x1000     /* Enable CZM Clear Counter Once                         */
#define nW1ZMONCE           0x0

/* Bit masks for CNT_DEBOUNCE */
#define DPRESCALE               0xf        /* Load Counter Register                             */


/**********************************************  PWM Masks  *******************************************************/

/* Bit masks for PWM_CTRL */
#define PWM_EN              0x1     /* PWM Enable                                   */
#define PWM_SYNC_EN             0X2     /* Enable Sync Enable                               */
#define PWM_DBL                 0x4     /* Double Update Mode                               */
#define PWM_EXTSYNC         0x8     /* External Sync                                    */
#define PWM_SYNCSEL             0x10        /* External Sync Select                             */
#define PWM_POLARITY            0x20        /* PWM Output Polarity                              */
#define PWM_SRMODE          0x40        /* PWM SR MODE                                  */
#define PWMTRIPINT_EN           0x80        /* Trip Interrupt Enable                            */
#define PWMSYNCINT_EN           0x100       /* Sync Interrupt Enable                            */
#define PWMTRIP_DSBL            0x200           /* Trip Input Disable                               */

/* Bit masks for PWM_STAT */
#define PWM_PHASE               0x1     /* PWM phase                                    */
#define PWM_POL                 0x2     /* PWM polarity                                     */
#define PWM_SR              0x4     /* PWM SR mode                                  */
#define PWM_TRIP                0x8     /* PWM Trip mode                                    */
#define PWM_TRIPINT         0x100       /* PWM Trip Interrupt                               */
#define PWM_SYNCINT         0x200       /* PWM Sync Interrupt                               */

/* Bit masks for PWMGATE Register */

#define CHOPHI              0x100       /* Gate Chopping Enable High Side                       */
#define CHOPLO              0x200       /* Gate Chopping Enable Low Side                        */

/* Bit masks for PWMSEG Register */

#define CH_EN               0x1     /* CH output Enable                                 */
#define CL_EN               0x2     /* CL output Enable                                 */
#define BH_EN               0x4     /* BH output Enable                                 */
#define BL_EN               0x8     /* BL output Enable                             */
#define AH_EN               0x10        /* AH output Enable                                 */
#define AL_EN               0x20        /* AL output Enable                                 */
#define CHCL_XOVR           0x40        /* Channel C output Crossover                       */
#define BHBL_XOVR           0x80        /* Channel B output Crossover                       */
#define AHAL_XOVR           0x100       /* Channel A output Crossover                       */

/* Bit masks for PWMLSI Register */
#define PWM_SR_LSI_A            0x1     /* PWM SR Low Side Invert Channel A                     */
#define PWM_SR_LSI_B            0x2     /* PWM SR Low Side Invert Channel A                     */
#define PWM_SR_LSI_C            0x4     /* PWM SR Low Side Invert Channel A                     */

/* Bit masks for PWM_STAT2 Register */
#define PWM_AL              0x1     /* pwm_al output signal for S/W observation                 */
#define PWM_AH              0x2     /* pwm_ah output signal for S/W observation                 */
#define PWM_BL              0x4     /* pwm_bl output signal for S/W observation                 */
#define PWM_BH              0x8     /* pwm_bh output signal for S/W observation                 */
#define PWM_CL              0x10        /* pwm_cl output signal for S/W observation                 */
#define PWM_CH              0x20        /* pwm_ch output signal for S/W observation                 */


/***********************************  RSI MASKS  ************************************/

/* Bit masks for RSI_PWR_CONTROL */
#define                    PWR_ON  0x3              /* Power On */
#define                RSI_CMD_OD  0x40             /* Open Drain Output */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 SD_CMD_OD  (RSI_CMD_OD)     /* Open Drain Output */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                nSD_CMD_OD  0x0
/* legacy bit mask (below) provided for backwards code compatibility */
#if 0
#define                       TBD  0x3c             /* TBD */
#endif
/* legacy bit mask (below) provided for backwards code compatibility */
#define                   ROD_CTL  0x80
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  nROD_CTL  0x80


/* Bit masks for RSI_CLK_CONTROL */
#define                    CLKDIV  0xff             /* MC_CLK Divisor */
#define                    CLK_EN  0x100            /* MC_CLK Bus Clock Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                     CLK_E  (CLK_EN)         /* MC_CLK Bus Clock Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                    nCLK_E  0x0
#define                 PWR_SV_EN  0x200            /* Power Save Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  PWR_SV_E  (PWR_SV_EN)      /* Power Save Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 nPWR_SV_E  0x0
#define             CLKDIV_BYPASS  0x400            /* Bypass Divisor */
/* legacy bit mask (below) provided for backwards code compatibility */
#define            nCLKDIV_BYPASS  0x0
#define                  BUS_MODE  0x1800           /* Bus width selection */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  WIDE_BUS  0x0800       /* Wide Bus Mode Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 nWIDE_BUS  0x0


/* Bit masks for RSI_COMMAND */
#define                   CMD_IDX  0x3f             /* Command Index */
#define                CMD_RSP_EN  0x40             /* Response */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                   CMD_RSP  (CMD_RSP_EN)     /* Response */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  nCMD_RSP  0x0
#define               CMD_LRSP_EN  0x80             /* Long Response */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 CMD_L_RSP  (CMD_LRSP_EN)    /* Long Response */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                nCMD_L_RSP  0x0
#define                CMD_INT_EN  0x100            /* Command Interrupt */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 CMD_INT_E  (CMD_INT_EN)     /* Command Interrupt */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                nCMD_INT_E  0x0
#define               CMD_PEND_EN  0x200            /* Command Pending */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                CMD_PEND_E  (CMD_PEND_EN)    /* Command Pending */
/* legacy bit mask (below) provided for backwards code compatibility */
#define               nCMD_PEND_E  0x0
#define                    CMD_EN  0x400            /* Command Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                     CMD_E  (CMD_EN)         /* Command Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                    nCMD_E  0x0


/* Bit masks for RSI_RESP_CMD */
#define                  RESP_CMD  0x3f             /* Response Command */

/* Bit masks for RSI_DATA_LGTH */
#define               DATA_LENGTH  0xffff           /* Data Length */


/* Bit masks for RSI_DATA_CONTROL */
#define                   DATA_EN  0x1              /* Data Transfer Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                     DTX_E  (DATA_EN)        /* Data Transfer Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                    nDTX_E  0x0
#define                  DATA_DIR  0x2              /* Data Transfer Direction */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                   DTX_DIR  (DATA_DIR)       /* Data Transfer Direction */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  nDTX_DIR  0x0
#define                 DATA_MODE  0x4              /* Data Transfer Mode */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  DTX_MODE  (DATA_MODE)      /* Data Transfer Mode */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 nDTX_MODE  0x0
#define               DATA_DMA_EN  0x8              /* Data Transfer DMA Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 DTX_DMA_E  0x8              /* Data Transfer DMA Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                nDTX_DMA_E  0x0
#define             DATA_BLK_LGTH  0xf0             /* Data Transfer Block Length */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              DTX_BLK_LGTH  0xf0             /* Data Transfer Block Length */
#define                      CEATA_EN  0x100          /* CE-ATA operation mode enable */
#define                  CEATA_CCS_EN  0x200          /* CE-ATA CCS mode enable */

/* Bit masks for RSI_DATA_CNT */
#define               DATA_COUNT  0xffff            /* Data Count */

/* Bit masks for RSI_STATUS */
#define              CMD_CRC_FAIL  0x1              /* CMD CRC Fail */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nCMD_CRC_FAIL  0x0
#define              DAT_CRC_FAIL  0x2              /* Data CRC Fail */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nDAT_CRC_FAIL  0x0
#define               CMD_TIMEOUT  0x4              /* CMD Time Out */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nCMD_TIMEOUT  0x0
#define               DAT_TIMEOUT  0x8              /* Data Time Out */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nDAT_TIMEOUT  0x0
#define               TX_UNDERRUN  0x10             /* Transmit Underrun */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nTX_UNDERRUN  0x0
#define                RX_OVERRUN  0x20             /* Receive Overrun */
/* legacy bit mask (below) provided for backwards code compatibility */
#define               nRX_OVERRUN  0x0
#define              CMD_RESP_END  0x40             /* CMD Response End */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nCMD_RESP_END  0x0
#define                  CMD_SENT  0x80             /* CMD Sent */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 nCMD_SENT  0x0
#define                   DAT_END  0x100            /* Data End */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  nDAT_END  0x0
#define             START_BIT_ERR  0x200            /* Start Bit Error */
/* legacy bit mask (below) provided for backwards code compatibility */
#define            nSTART_BIT_ERR  0x0
#define               DAT_BLK_END  0x400            /* Data Block End */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nDAT_BLK_END  0x0
#define                   CMD_ACT  0x800            /* CMD Active */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  nCMD_ACT  0x0
#define                    TX_ACT  0x1000           /* Transmit Active */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                   nTX_ACT  0x0
#define                    RX_ACT  0x2000           /* Receive Active */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                   nRX_ACT  0x0
#define              TX_FIFO_STAT  0x4000           /* Transmit FIFO Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nTX_FIFO_STAT  0x0
#define              RX_FIFO_STAT  0x8000           /* Receive FIFO Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nRX_FIFO_STAT  0x0
#define              TX_FIFO_FULL  0x10000          /* Transmit FIFO Full */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nTX_FIFO_FULL  0x0
#define              RX_FIFO_FULL  0x20000          /* Receive FIFO Full */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nRX_FIFO_FULL  0x0
#define              TX_FIFO_ZERO  0x40000          /* Transmit FIFO Empty */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nTX_FIFO_ZERO  0x0
#define               RX_DAT_ZERO  0x80000          /* Receive FIFO Empty */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nRX_DAT_ZERO  0x0
#define                TX_DAT_RDY  0x100000         /* Transmit Data Available */
/* legacy bit mask (below) provided for backwards code compatibility */
#define               nTX_DAT_RDY  0x0
#define               RX_FIFO_RDY  0x200000         /* Receive Data Available */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nRX_FIFO_RDY  0x0

/* Bit masks for RSI_STATCL */

#define         CMD_CRC_FAIL_STAT  0x1              /* CMD CRC Fail Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nCMD_CRC_FAIL_STAT  0x0
#define         DAT_CRC_FAIL_STAT  0x2              /* Data CRC Fail Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nDAT_CRC_FAIL_STAT  0x0
#define          CMD_TIMEOUT_STAT  0x4              /* CMD Time Out Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nCMD_TIMEOUT_STAT  0x0
#define          DAT_TIMEOUT_STAT  0x8              /* Data Time Out status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nDAT_TIMEOUT_STAT  0x0
#define          TX_UNDERRUN_STAT  0x10             /* Transmit Underrun Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nTX_UNDERRUN_STAT  0x0
#define           RX_OVERRUN_STAT  0x20             /* Receive Overrun Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define          nRX_OVERRUN_STAT  0x0
#define         CMD_RESP_END_STAT  0x40             /* CMD Response End Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nCMD_RESP_END_STAT  0x0
#define             CMD_SENT_STAT  0x80             /* CMD Sent Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define            nCMD_SENT_STAT  0x0
#define              DAT_END_STAT  0x100            /* Data End Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nDAT_END_STAT  0x0
#define        START_BIT_ERR_STAT  0x200            /* Start Bit Error Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define       nSTART_BIT_ERR_STAT  0x0
#define          DAT_BLK_END_STAT  0x400            /* Data Block End Status */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nDAT_BLK_END_STAT  0x0

/* Bit masks for RSI_MASKx */

#define         CMD_CRC_FAIL_MASK  0x1              /* CMD CRC Fail Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nCMD_CRC_FAIL_MASK  0x0
#define         DAT_CRC_FAIL_MASK  0x2              /* Data CRC Fail Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nDAT_CRC_FAIL_MASK  0x0
#define          CMD_TIMEOUT_MASK  0x4              /* CMD Time Out Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nCMD_TIMEOUT_MASK  0x0
#define          DAT_TIMEOUT_MASK  0x8              /* Data Time Out Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nDAT_TIMEOUT_MASK  0x0
#define          TX_UNDERRUN_MASK  0x10             /* Transmit Underrun Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nTX_UNDERRUN_MASK  0x0
#define           RX_OVERRUN_MASK  0x20             /* Receive Overrun Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define          nRX_OVERRUN_MASK  0x0
#define         CMD_RESP_END_MASK  0x40             /* CMD Response End Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nCMD_RESP_END_MASK  0x0
#define             CMD_SENT_MASK  0x80             /* CMD Sent Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define            nCMD_SENT_MASK  0x0
#define              DAT_END_MASK  0x100            /* Data End Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nDAT_END_MASK  0x0
#define        START_BIT_ERR_MASK  0x200            /* Start Bit Error Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define       nSTART_BIT_ERR_MASK  0x0
#define          DAT_BLK_END_MASK  0x400            /* Data Block End Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nDAT_BLK_END_MASK  0x0
#define              CMD_ACT_MASK  0x800            /* CMD Active Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nCMD_ACT_MASK  0x0
#define               TX_ACT_MASK  0x1000           /* Transmit Active Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nTX_ACT_MASK  0x0
#define               RX_ACT_MASK  0x2000           /* Receive Active Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nRX_ACT_MASK  0x0
#define         TX_FIFO_STAT_MASK  0x4000           /* Transmit FIFO Status Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nTX_FIFO_STAT_MASK  0x0
#define         RX_FIFO_STAT_MASK  0x8000           /* Receive FIFO Status Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nRX_FIFO_STAT_MASK  0x0
#define         TX_FIFO_FULL_MASK  0x10000          /* Transmit FIFO Full Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nTX_FIFO_FULL_MASK  0x0
#define         RX_FIFO_FULL_MASK  0x20000          /* Receive FIFO Full Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nRX_FIFO_FULL_MASK  0x0
#define         TX_FIFO_ZERO_MASK  0x40000          /* Transmit FIFO Empty Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define        nTX_FIFO_ZERO_MASK  0x0
#define          RX_DAT_ZERO_MASK  0x80000          /* Receive FIFO Empty Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nRX_DAT_ZERO_MASK  0x0
#define           TX_DAT_RDY_MASK  0x100000         /* Transmit Data Available Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define          nTX_DAT_RDY_MASK  0x0
#define          RX_FIFO_RDY_MASK  0x200000         /* Receive Data Available Mask */
/* legacy bit mask (below) provided for backwards code compatibility */
#define         nRX_FIFO_RDY_MASK  0x0

/* Bit masks for RSI_FIFO_CNT */
#define                FIFO_COUNT  0x7fff           /* FIFO Count */

/* Bit masks for RSI_CEATA_CONTROL */
#define       CEATA_TX_CCSD  0x1                /* Send CE-ATA CCSD sequence */

/* Bit masks for RSI_ESTAT */
#define              SDIO_INT_DET  0x2              /* SDIO Int Detected */
/* legacy bit mask (below) provided for backwards code compatibility */
#define             nSDIO_INT_DET  0x0
#define               SD_CARD_DET  0x10             /* SD Card Detect */
/* legacy bit mask (below) provided for backwards code compatibility */
#define              nSD_CARD_DET  0x0
#define             CEATA_INT_DET  0x20

/* Bit masks for RSI_EMASK */
#define         SDIO_INT_DET_MASK  0x2                /* Mask SDIO Int Detected */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  SDIO_MSK  (SDIO_INT_DET_MASK)/* Mask SDIO Int Detected */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 nSDIO_MSK  0x0
#define          SD_CARD_DET_MASK  0x10               /* Mask Card Detect */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  SCD_MASK  (SD_CARD_DET_MASK) /* Mask Card Detect */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  nSCD_MSK  0x0
#define        CEATA_INT_DET_MASK  0x20


/* Bit masks for SDH_CFG */

/* Left in for backwards compatibility */
#define                RSI_CLK_EN  0x1
/* legacy bit mask (below) provided for backwards code compatibility */
#define                   CLKS_EN  (RSI_CLK_EN)         /* Clocks Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                  nCLKS_EN  0x0
#define                  SDIO4_EN  0x4              /* SDIO 4-Bit Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                      SD4E  (SDIO4_EN)       /* SDIO 4-Bit Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                     nSD4E  0x0
#define                     MW_EN  0x8              /* Moving Window Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                       MWE  (MW_EN)          /* Moving Window Enable */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                      nMWE  0x0
#define                   RSI_RST  0x10             /* SDMMC Reset */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                    SD_RST  (RSI_RST)        /* SDMMC Reset */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                   nSD_RST  0x0
#define                    PU_DAT  0x20             /* Pull-up SD_DAT */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 PUP_SDDAT  (PU_DAT)         /* Pull-up SD_DAT */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                nPUP_SDDAT  0x0
#define                   PU_DAT3  0x40             /* Pull-up SD_DAT3 */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                PUP_SDDAT3  (PU_DAT3)        /* Pull-up SD_DAT3 */
/* legacy bit mask (below) provided for backwards code compatibility */
#define               nPUP_SDDAT3  0x0
#define                   PD_DAT3  0x80             /* Pull-down SD_DAT3 */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                 PD_SDDAT3  (PD_DAT3)        /* Pull-down SD_DAT3 */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                nPD_SDDAT3  0x0


/* Bit masks for RSI_RD_WAIT_EN */
#define          SDIO_RWR  0x1              /* Read Wait Request */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                       RWR  (SDIO_RWR)       /* Read Wait Request */
/* legacy bit mask (below) provided for backwards code compatibility */
#define                      nRWR  0x0

/* Bit masks for RSI_PIDx */
#define                   RSI_PID  0xff         /* RSI Peripheral ID */


/* ************  CONTROLLER AREA NETWORK (CAN) MASKS  ***************/

/* CAN_CONTROL Masks                                                */
#define SRS         0x0001  /* Software Reset                       */
#define DNM         0x0002  /* Device Net Mode                      */
#define ABO         0x0004  /* Auto-Bus On Enable                   */
#define WBA         0x0010  /* Wake-Up On CAN Bus Activity Enable   */
#define SMR         0x0020  /* Sleep Mode Request                   */
#define CSR         0x0040  /* CAN Suspend Mode Request             */
#define CCR         0x0080  /* CAN Configuration Mode Request       */

/* CAN_STATUS Masks                                             */
#define WT          0x0001  /* TX Warning Flag                  */
#define WR          0x0002  /* RX Warning Flag                  */
#define EP          0x0004  /* Error Passive Mode               */
#define EBO         0x0008  /* Error Bus Off Mode               */
#define CSA         0x0040  /* Suspend Mode Acknowledge         */
#define CCA         0x0080  /* Configuration Mode Acknowledge   */
#define MBPTR       0x1F00  /* Mailbox Pointer                  */
#define TRM         0x4000  /* Transmit Mode                    */
#define REC         0x8000  /* Receive Mode                     */

/* CAN_CLOCK Masks                                  */
#define BRP         0x03FF  /* Bit-Rate Pre-Scaler  */

/* CAN_TIMING Masks                                         */
#define TSEG1       0x000F  /* Time Segment 1               */
#define TSEG2       0x0070  /* Time Segment 2               */
#define SAM         0x0080  /* Sampling                     */
#define SJW         0x0300  /* Synchronization Jump Width   */

/* CAN_DEBUG Masks                                          */
#define DEC         0x0001  /* Disable CAN Error Counters   */
#define DRI         0x0002  /* Disable CAN RX Input         */
#define DTO         0x0004  /* Disable CAN TX Output        */
#define DIL         0x0008  /* Disable CAN Internal Loop    */
#define MAA         0x0010  /* Mode Auto-Acknowledge Enable */
#define MRB         0x0020  /* Mode Read Back Enable        */
#define CDE         0x8000  /* CAN Debug Enable             */

/* CAN_CEC Masks                                        */
#define RXECNT      0x00FF  /* Receive Error Counter    */
#define TXECNT      0xFF00  /* Transmit Error Counter   */

/* CAN_INTR Masks                                           */
#define MBRIRQ  0x0001  /* Mailbox Receive Interrupt    */
#define MBRIF       (MBRIRQ) /* legacy */
#define MBTIRQ  0x0002  /* Mailbox Transmit Interrupt   */
#define MBTIF       (MBTIRQ) /* legacy */
#define GIRQ        0x0004  /* Global Interrupt             */
#define SMACK       0x0008  /* Sleep Mode Acknowledge       */
#define CANTX       0x0040  /* CAN TX Bus Value             */
#define CANRX       0x0080  /* CAN RX Bus Value             */

/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks                                      */
#define DFC         0xFFFF  /* Data Filtering Code (If Enabled) (ID0)       */
#define EXTID_LO    0xFFFF  /* Lower 16 Bits of Extended Identifier (ID0)   */
#define EXTID_HI    0x0003  /* Upper 2 Bits of Extended Identifier (ID1)    */
#define BASEID      0x1FFC  /* Base Identifier                              */
#define IDE         0x2000  /* Identifier Extension                         */
#define RTR         0x4000  /* Remote Frame Transmission Request            */
#define AME         0x8000  /* Acceptance Mask Enable                       */

/* CAN_MBxx_TIMESTAMP Masks                 */
#define TSV         0xFFFF  /* Timestamp    */

/* CAN_MBxx_LENGTH Masks                        */
#define DLC         0x000F  /* Data Length Code */

/* CAN_AMxxH and CAN_AMxxL Masks                                                */
#define DFM         0xFFFF  /* Data Field Mask (If Enabled) (CAN_AMxxL)         */
#define EXTID_LO    0xFFFF  /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
#define EXTID_HI    0x0003  /* Upper 2 Bits of Extended Identifier (CAN_AMxxH)  */
#define BASEID      0x1FFC  /* Base Identifier                                  */
#define AMIDE       0x2000  /* Acceptance Mask ID Extension Enable              */
#define FMD         0x4000  /* Full Mask Data Field Enable                      */
#define FDF         0x8000  /* Filter On Data Field Enable                      */

/* CAN_MC1 Masks                                    */
#define MC0         0x0001  /* Enable Mailbox 0     */
#define MC1         0x0002  /* Enable Mailbox 1     */
#define MC2         0x0004  /* Enable Mailbox 2     */
#define MC3         0x0008  /* Enable Mailbox 3     */
#define MC4         0x0010  /* Enable Mailbox 4     */
#define MC5         0x0020  /* Enable Mailbox 5     */
#define MC6         0x0040  /* Enable Mailbox 6     */
#define MC7         0x0080  /* Enable Mailbox 7     */
#define MC8         0x0100  /* Enable Mailbox 8     */
#define MC9         0x0200  /* Enable Mailbox 9     */
#define MC10        0x0400  /* Enable Mailbox 10    */
#define MC11        0x0800  /* Enable Mailbox 11    */
#define MC12        0x1000  /* Enable Mailbox 12    */
#define MC13        0x2000  /* Enable Mailbox 13    */
#define MC14        0x4000  /* Enable Mailbox 14    */
#define MC15        0x8000  /* Enable Mailbox 15    */

/* CAN_MC2 Masks                                    */
#define MC16        0x0001  /* Enable Mailbox 16    */
#define MC17        0x0002  /* Enable Mailbox 17    */
#define MC18        0x0004  /* Enable Mailbox 18    */
#define MC19        0x0008  /* Enable Mailbox 19    */
#define MC20        0x0010  /* Enable Mailbox 20    */
#define MC21        0x0020  /* Enable Mailbox 21    */
#define MC22        0x0040  /* Enable Mailbox 22    */
#define MC23        0x0080  /* Enable Mailbox 23    */
#define MC24        0x0100  /* Enable Mailbox 24    */
#define MC25        0x0200  /* Enable Mailbox 25    */
#define MC26        0x0400  /* Enable Mailbox 26    */
#define MC27        0x0800  /* Enable Mailbox 27    */
#define MC28        0x1000  /* Enable Mailbox 28    */
#define MC29        0x2000  /* Enable Mailbox 29    */
#define MC30        0x4000  /* Enable Mailbox 30    */
#define MC31        0x8000  /* Enable Mailbox 31    */

/* CAN_MD1 Masks                                                */
#define MD0         0x0001  /* Enable Mailbox 0 For Receive     */
#define MD1         0x0002  /* Enable Mailbox 1 For Receive     */
#define MD2         0x0004  /* Enable Mailbox 2 For Receive     */
#define MD3         0x0008  /* Enable Mailbox 3 For Receive     */
#define MD4         0x0010  /* Enable Mailbox 4 For Receive     */
#define MD5         0x0020  /* Enable Mailbox 5 For Receive     */
#define MD6         0x0040  /* Enable Mailbox 6 For Receive     */
#define MD7         0x0080  /* Enable Mailbox 7 For Receive     */
#define MD8         0x0100  /* Enable Mailbox 8 For Receive     */
#define MD9         0x0200  /* Enable Mailbox 9 For Receive     */
#define MD10        0x0400  /* Enable Mailbox 10 For Receive    */
#define MD11        0x0800  /* Enable Mailbox 11 For Receive    */
#define MD12        0x1000  /* Enable Mailbox 12 For Receive    */
#define MD13        0x2000  /* Enable Mailbox 13 For Receive    */
#define MD14        0x4000  /* Enable Mailbox 14 For Receive    */
#define MD15        0x8000  /* Enable Mailbox 15 For Receive    */

/* CAN_MD2 Masks                                                */
#define MD16        0x0001  /* Enable Mailbox 16 For Receive    */
#define MD17        0x0002  /* Enable Mailbox 17 For Receive    */
#define MD18        0x0004  /* Enable Mailbox 18 For Receive    */
#define MD19        0x0008  /* Enable Mailbox 19 For Receive    */
#define MD20        0x0010  /* Enable Mailbox 20 For Receive    */
#define MD21        0x0020  /* Enable Mailbox 21 For Receive    */
#define MD22        0x0040  /* Enable Mailbox 22 For Receive    */
#define MD23        0x0080  /* Enable Mailbox 23 For Receive    */
#define MD24        0x0100  /* Enable Mailbox 24 For Receive    */
#define MD25        0x0200  /* Enable Mailbox 25 For Receive    */
#define MD26        0x0400  /* Enable Mailbox 26 For Receive    */
#define MD27        0x0800  /* Enable Mailbox 27 For Receive    */
#define MD28        0x1000  /* Enable Mailbox 28 For Receive    */
#define MD29        0x2000  /* Enable Mailbox 29 For Receive    */
#define MD30        0x4000  /* Enable Mailbox 30 For Receive    */
#define MD31        0x8000  /* Enable Mailbox 31 For Receive    */

/* CAN_RMP1 Masks                                               */
#define RMP0        0x0001  /* RX Message Pending In Mailbox 0  */
#define RMP1        0x0002  /* RX Message Pending In Mailbox 1  */
#define RMP2        0x0004  /* RX Message Pending In Mailbox 2  */
#define RMP3        0x0008  /* RX Message Pending In Mailbox 3  */
#define RMP4        0x0010  /* RX Message Pending In Mailbox 4  */
#define RMP5        0x0020  /* RX Message Pending In Mailbox 5  */
#define RMP6        0x0040  /* RX Message Pending In Mailbox 6  */
#define RMP7        0x0080  /* RX Message Pending In Mailbox 7  */
#define RMP8        0x0100  /* RX Message Pending In Mailbox 8  */
#define RMP9        0x0200  /* RX Message Pending In Mailbox 9  */
#define RMP10       0x0400  /* RX Message Pending In Mailbox 10 */
#define RMP11       0x0800  /* RX Message Pending In Mailbox 11 */
#define RMP12       0x1000  /* RX Message Pending In Mailbox 12 */
#define RMP13       0x2000  /* RX Message Pending In Mailbox 13 */
#define RMP14       0x4000  /* RX Message Pending In Mailbox 14 */
#define RMP15       0x8000  /* RX Message Pending In Mailbox 15 */

/* CAN_RMP2 Masks                                               */
#define RMP16       0x0001  /* RX Message Pending In Mailbox 16 */
#define RMP17       0x0002  /* RX Message Pending In Mailbox 17 */
#define RMP18       0x0004  /* RX Message Pending In Mailbox 18 */
#define RMP19       0x0008  /* RX Message Pending In Mailbox 19 */
#define RMP20       0x0010  /* RX Message Pending In Mailbox 20 */
#define RMP21       0x0020  /* RX Message Pending In Mailbox 21 */
#define RMP22       0x0040  /* RX Message Pending In Mailbox 22 */
#define RMP23       0x0080  /* RX Message Pending In Mailbox 23 */
#define RMP24       0x0100  /* RX Message Pending In Mailbox 24 */
#define RMP25       0x0200  /* RX Message Pending In Mailbox 25 */
#define RMP26       0x0400  /* RX Message Pending In Mailbox 26 */
#define RMP27       0x0800  /* RX Message Pending In Mailbox 27 */
#define RMP28       0x1000  /* RX Message Pending In Mailbox 28 */
#define RMP29       0x2000  /* RX Message Pending In Mailbox 29 */
#define RMP30       0x4000  /* RX Message Pending In Mailbox 30 */
#define RMP31       0x8000  /* RX Message Pending In Mailbox 31 */

/* CAN_RML1 Masks                                               */
#define RML0        0x0001  /* RX Message Lost In Mailbox 0     */
#define RML1        0x0002  /* RX Message Lost In Mailbox 1     */
#define RML2        0x0004  /* RX Message Lost In Mailbox 2     */
#define RML3        0x0008  /* RX Message Lost In Mailbox 3     */
#define RML4        0x0010  /* RX Message Lost In Mailbox 4     */
#define RML5        0x0020  /* RX Message Lost In Mailbox 5     */
#define RML6        0x0040  /* RX Message Lost In Mailbox 6     */
#define RML7        0x0080  /* RX Message Lost In Mailbox 7     */
#define RML8        0x0100  /* RX Message Lost In Mailbox 8     */
#define RML9        0x0200  /* RX Message Lost In Mailbox 9     */
#define RML10       0x0400  /* RX Message Lost In Mailbox 10    */
#define RML11       0x0800  /* RX Message Lost In Mailbox 11    */
#define RML12       0x1000  /* RX Message Lost In Mailbox 12    */
#define RML13       0x2000  /* RX Message Lost In Mailbox 13    */
#define RML14       0x4000  /* RX Message Lost In Mailbox 14    */
#define RML15       0x8000  /* RX Message Lost In Mailbox 15    */

/* CAN_RML2 Masks                                               */
#define RML16       0x0001  /* RX Message Lost In Mailbox 16    */
#define RML17       0x0002  /* RX Message Lost In Mailbox 17    */
#define RML18       0x0004  /* RX Message Lost In Mailbox 18    */
#define RML19       0x0008  /* RX Message Lost In Mailbox 19    */
#define RML20       0x0010  /* RX Message Lost In Mailbox 20    */
#define RML21       0x0020  /* RX Message Lost In Mailbox 21    */
#define RML22       0x0040  /* RX Message Lost In Mailbox 22    */
#define RML23       0x0080  /* RX Message Lost In Mailbox 23    */
#define RML24       0x0100  /* RX Message Lost In Mailbox 24    */
#define RML25       0x0200  /* RX Message Lost In Mailbox 25    */
#define RML26       0x0400  /* RX Message Lost In Mailbox 26    */
#define RML27       0x0800  /* RX Message Lost In Mailbox 27    */
#define RML28       0x1000  /* RX Message Lost In Mailbox 28    */
#define RML29       0x2000  /* RX Message Lost In Mailbox 29    */
#define RML30       0x4000  /* RX Message Lost In Mailbox 30    */
#define RML31       0x8000  /* RX Message Lost In Mailbox 31    */

/* CAN_OPSS1 Masks                                                                              */
#define OPSS0       0x0001  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0   */
#define OPSS1       0x0002  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1   */
#define OPSS2       0x0004  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2   */
#define OPSS3       0x0008  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3   */
#define OPSS4       0x0010  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4   */
#define OPSS5       0x0020  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5   */
#define OPSS6       0x0040  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6   */
#define OPSS7       0x0080  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7   */
#define OPSS8       0x0100  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8   */
#define OPSS9       0x0200  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9   */
#define OPSS10      0x0400  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10  */
#define OPSS11      0x0800  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11  */
#define OPSS12      0x1000  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12  */
#define OPSS13      0x2000  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13  */
#define OPSS14      0x4000  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14  */
#define OPSS15      0x8000  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15  */

/* CAN_OPSS2 Masks                                                                              */
#define OPSS16      0x0001  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16  */
#define OPSS17      0x0002  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17  */
#define OPSS18      0x0004  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18  */
#define OPSS19      0x0008  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19  */
#define OPSS20      0x0010  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20  */
#define OPSS21      0x0020  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21  */
#define OPSS22      0x0040  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22  */
#define OPSS23      0x0080  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23  */
#define OPSS24      0x0100  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24  */
#define OPSS25      0x0200  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25  */
#define OPSS26      0x0400  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26  */
#define OPSS27      0x0800  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27  */
#define OPSS28      0x1000  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28  */
#define OPSS29      0x2000  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29  */
#define OPSS30      0x4000  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30  */
#define OPSS31      0x8000  /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31  */

/* CAN_TRR1 Masks                                                       */
#define TRR0        0x0001  /* Deny But Don't Lock Access To Mailbox 0  */
#define TRR1        0x0002  /* Deny But Don't Lock Access To Mailbox 1  */
#define TRR2        0x0004  /* Deny But Don't Lock Access To Mailbox 2  */
#define TRR3        0x0008  /* Deny But Don't Lock Access To Mailbox 3  */
#define TRR4        0x0010  /* Deny But Don't Lock Access To Mailbox 4  */
#define TRR5        0x0020  /* Deny But Don't Lock Access To Mailbox 5  */
#define TRR6        0x0040  /* Deny But Don't Lock Access To Mailbox 6  */
#define TRR7        0x0080  /* Deny But Don't Lock Access To Mailbox 7  */
#define TRR8        0x0100  /* Deny But Don't Lock Access To Mailbox 8  */
#define TRR9        0x0200  /* Deny But Don't Lock Access To Mailbox 9  */
#define TRR10       0x0400  /* Deny But Don't Lock Access To Mailbox 10 */
#define TRR11       0x0800  /* Deny But Don't Lock Access To Mailbox 11 */
#define TRR12       0x1000  /* Deny But Don't Lock Access To Mailbox 12 */
#define TRR13       0x2000  /* Deny But Don't Lock Access To Mailbox 13 */
#define TRR14       0x4000  /* Deny But Don't Lock Access To Mailbox 14 */
#define TRR15       0x8000  /* Deny But Don't Lock Access To Mailbox 15 */

/* CAN_TRR2 Masks                                                       */
#define TRR16       0x0001  /* Deny But Don't Lock Access To Mailbox 16 */
#define TRR17       0x0002  /* Deny But Don't Lock Access To Mailbox 17 */
#define TRR18       0x0004  /* Deny But Don't Lock Access To Mailbox 18 */
#define TRR19       0x0008  /* Deny But Don't Lock Access To Mailbox 19 */
#define TRR20       0x0010  /* Deny But Don't Lock Access To Mailbox 20 */
#define TRR21       0x0020  /* Deny But Don't Lock Access To Mailbox 21 */
#define TRR22       0x0040  /* Deny But Don't Lock Access To Mailbox 22 */
#define TRR23       0x0080  /* Deny But Don't Lock Access To Mailbox 23 */
#define TRR24       0x0100  /* Deny But Don't Lock Access To Mailbox 24 */
#define TRR25       0x0200  /* Deny But Don't Lock Access To Mailbox 25 */
#define TRR26       0x0400  /* Deny But Don't Lock Access To Mailbox 26 */
#define TRR27       0x0800  /* Deny But Don't Lock Access To Mailbox 27 */
#define TRR28       0x1000  /* Deny But Don't Lock Access To Mailbox 28 */
#define TRR29       0x2000  /* Deny But Don't Lock Access To Mailbox 29 */
#define TRR30       0x4000  /* Deny But Don't Lock Access To Mailbox 30 */
#define TRR31       0x8000  /* Deny But Don't Lock Access To Mailbox 31 */

/* CAN_TRS1 Masks                                                   */
#define TRS0        0x0001  /* Remote Frame Request For Mailbox 0   */
#define TRS1        0x0002  /* Remote Frame Request For Mailbox 1   */
#define TRS2        0x0004  /* Remote Frame Request For Mailbox 2   */
#define TRS3        0x0008  /* Remote Frame Request For Mailbox 3   */
#define TRS4        0x0010  /* Remote Frame Request For Mailbox 4   */
#define TRS5        0x0020  /* Remote Frame Request For Mailbox 5   */
#define TRS6        0x0040  /* Remote Frame Request For Mailbox 6   */
#define TRS7        0x0080  /* Remote Frame Request For Mailbox 7   */
#define TRS8        0x0100  /* Remote Frame Request For Mailbox 8   */
#define TRS9        0x0200  /* Remote Frame Request For Mailbox 9   */
#define TRS10       0x0400  /* Remote Frame Request For Mailbox 10  */
#define TRS11       0x0800  /* Remote Frame Request For Mailbox 11  */
#define TRS12       0x1000  /* Remote Frame Request For Mailbox 12  */
#define TRS13       0x2000  /* Remote Frame Request For Mailbox 13  */
#define TRS14       0x4000  /* Remote Frame Request For Mailbox 14  */
#define TRS15       0x8000  /* Remote Frame Request For Mailbox 15  */

/* CAN_TRS2 Masks                                                   */
#define TRS16       0x0001  /* Remote Frame Request For Mailbox 16  */
#define TRS17       0x0002  /* Remote Frame Request For Mailbox 17  */
#define TRS18       0x0004  /* Remote Frame Request For Mailbox 18  */
#define TRS19       0x0008  /* Remote Frame Request For Mailbox 19  */
#define TRS20       0x0010  /* Remote Frame Request For Mailbox 20  */
#define TRS21       0x0020  /* Remote Frame Request For Mailbox 21  */
#define TRS22       0x0040  /* Remote Frame Request For Mailbox 22  */
#define TRS23       0x0080  /* Remote Frame Request For Mailbox 23  */
#define TRS24       0x0100  /* Remote Frame Request For Mailbox 24  */
#define TRS25       0x0200  /* Remote Frame Request For Mailbox 25  */
#define TRS26       0x0400  /* Remote Frame Request For Mailbox 26  */
#define TRS27       0x0800  /* Remote Frame Request For Mailbox 27  */
#define TRS28       0x1000  /* Remote Frame Request For Mailbox 28  */
#define TRS29       0x2000  /* Remote Frame Request For Mailbox 29  */
#define TRS30       0x4000  /* Remote Frame Request For Mailbox 30  */
#define TRS31       0x8000  /* Remote Frame Request For Mailbox 31  */

/* CAN_AA1 Masks                                                */
#define AA0         0x0001  /* Aborted Message In Mailbox 0     */
#define AA1         0x0002  /* Aborted Message In Mailbox 1     */
#define AA2         0x0004  /* Aborted Message In Mailbox 2     */
#define AA3         0x0008  /* Aborted Message In Mailbox 3     */
#define AA4         0x0010  /* Aborted Message In Mailbox 4     */
#define AA5         0x0020  /* Aborted Message In Mailbox 5     */
#define AA6         0x0040  /* Aborted Message In Mailbox 6     */
#define AA7         0x0080  /* Aborted Message In Mailbox 7     */
#define AA8         0x0100  /* Aborted Message In Mailbox 8     */
#define AA9         0x0200  /* Aborted Message In Mailbox 9     */
#define AA10        0x0400  /* Aborted Message In Mailbox 10    */
#define AA11        0x0800  /* Aborted Message In Mailbox 11    */
#define AA12        0x1000  /* Aborted Message In Mailbox 12    */
#define AA13        0x2000  /* Aborted Message In Mailbox 13    */
#define AA14        0x4000  /* Aborted Message In Mailbox 14    */
#define AA15        0x8000  /* Aborted Message In Mailbox 15    */

/* CAN_AA2 Masks                                                */
#define AA16        0x0001  /* Aborted Message In Mailbox 16    */
#define AA17        0x0002  /* Aborted Message In Mailbox 17    */
#define AA18        0x0004  /* Aborted Message In Mailbox 18    */
#define AA19        0x0008  /* Aborted Message In Mailbox 19    */
#define AA20        0x0010  /* Aborted Message In Mailbox 20    */
#define AA21        0x0020  /* Aborted Message In Mailbox 21    */
#define AA22        0x0040  /* Aborted Message In Mailbox 22    */
#define AA23        0x0080  /* Aborted Message In Mailbox 23    */
#define AA24        0x0100  /* Aborted Message In Mailbox 24    */
#define AA25        0x0200  /* Aborted Message In Mailbox 25    */
#define AA26        0x0400  /* Aborted Message In Mailbox 26    */
#define AA27        0x0800  /* Aborted Message In Mailbox 27    */
#define AA28        0x1000  /* Aborted Message In Mailbox 28    */
#define AA29        0x2000  /* Aborted Message In Mailbox 29    */
#define AA30        0x4000  /* Aborted Message In Mailbox 30    */
#define AA31        0x8000  /* Aborted Message In Mailbox 31    */

/* CAN_TA1 Masks                                                    */
#define TA0         0x0001  /* Transmit Successful From Mailbox 0   */
#define TA1         0x0002  /* Transmit Successful From Mailbox 1   */
#define TA2         0x0004  /* Transmit Successful From Mailbox 2   */
#define TA3         0x0008  /* Transmit Successful From Mailbox 3   */
#define TA4         0x0010  /* Transmit Successful From Mailbox 4   */
#define TA5         0x0020  /* Transmit Successful From Mailbox 5   */
#define TA6         0x0040  /* Transmit Successful From Mailbox 6   */
#define TA7         0x0080  /* Transmit Successful From Mailbox 7   */
#define TA8         0x0100  /* Transmit Successful From Mailbox 8   */
#define TA9         0x0200  /* Transmit Successful From Mailbox 9   */
#define TA10        0x0400  /* Transmit Successful From Mailbox 10  */
#define TA11        0x0800  /* Transmit Successful From Mailbox 11  */
#define TA12        0x1000  /* Transmit Successful From Mailbox 12  */
#define TA13        0x2000  /* Transmit Successful From Mailbox 13  */
#define TA14        0x4000  /* Transmit Successful From Mailbox 14  */
#define TA15        0x8000  /* Transmit Successful From Mailbox 15  */

/* CAN_TA2 Masks                                                    */
#define TA16        0x0001  /* Transmit Successful From Mailbox 16  */
#define TA17        0x0002  /* Transmit Successful From Mailbox 17  */
#define TA18        0x0004  /* Transmit Successful From Mailbox 18  */
#define TA19        0x0008  /* Transmit Successful From Mailbox 19  */
#define TA20        0x0010  /* Transmit Successful From Mailbox 20  */
#define TA21        0x0020  /* Transmit Successful From Mailbox 21  */
#define TA22        0x0040  /* Transmit Successful From Mailbox 22  */
#define TA23        0x0080  /* Transmit Successful From Mailbox 23  */
#define TA24        0x0100  /* Transmit Successful From Mailbox 24  */
#define TA25        0x0200  /* Transmit Successful From Mailbox 25  */
#define TA26        0x0400  /* Transmit Successful From Mailbox 26  */
#define TA27        0x0800  /* Transmit Successful From Mailbox 27  */
#define TA28        0x1000  /* Transmit Successful From Mailbox 28  */
#define TA29        0x2000  /* Transmit Successful From Mailbox 29  */
#define TA30        0x4000  /* Transmit Successful From Mailbox 30  */
#define TA31        0x8000  /* Transmit Successful From Mailbox 31  */

/* CAN_MBTD Masks                                               */
#define TDPTR       0x001F  /* Mailbox To Temporarily Disable   */
#define TDA         0x0040  /* Temporary Disable Acknowledge    */
#define TDR         0x0080  /* Temporary Disable Request        */

/* CAN_RFH1 Masks                                                                       */
#define RFH0        0x0001  /* Enable Automatic Remote Frame Handling For Mailbox 0     */
#define RFH1        0x0002  /* Enable Automatic Remote Frame Handling For Mailbox 1     */
#define RFH2        0x0004  /* Enable Automatic Remote Frame Handling For Mailbox 2     */
#define RFH3        0x0008  /* Enable Automatic Remote Frame Handling For Mailbox 3     */
#define RFH4        0x0010  /* Enable Automatic Remote Frame Handling For Mailbox 4     */
#define RFH5        0x0020  /* Enable Automatic Remote Frame Handling For Mailbox 5     */
#define RFH6        0x0040  /* Enable Automatic Remote Frame Handling For Mailbox 6     */
#define RFH7        0x0080  /* Enable Automatic Remote Frame Handling For Mailbox 7     */
#define RFH8        0x0100  /* Enable Automatic Remote Frame Handling For Mailbox 8     */
#define RFH9        0x0200  /* Enable Automatic Remote Frame Handling For Mailbox 9     */
#define RFH10       0x0400  /* Enable Automatic Remote Frame Handling For Mailbox 10    */
#define RFH11       0x0800  /* Enable Automatic Remote Frame Handling For Mailbox 11    */
#define RFH12       0x1000  /* Enable Automatic Remote Frame Handling For Mailbox 12    */
#define RFH13       0x2000  /* Enable Automatic Remote Frame Handling For Mailbox 13    */
#define RFH14       0x4000  /* Enable Automatic Remote Frame Handling For Mailbox 14    */
#define RFH15       0x8000  /* Enable Automatic Remote Frame Handling For Mailbox 15    */

/* CAN_RFH2 Masks                                                                       */
#define RFH16       0x0001  /* Enable Automatic Remote Frame Handling For Mailbox 16    */
#define RFH17       0x0002  /* Enable Automatic Remote Frame Handling For Mailbox 17    */
#define RFH18       0x0004  /* Enable Automatic Remote Frame Handling For Mailbox 18    */
#define RFH19       0x0008  /* Enable Automatic Remote Frame Handling For Mailbox 19    */
#define RFH20       0x0010  /* Enable Automatic Remote Frame Handling For Mailbox 20    */
#define RFH21       0x0020  /* Enable Automatic Remote Frame Handling For Mailbox 21    */
#define RFH22       0x0040  /* Enable Automatic Remote Frame Handling For Mailbox 22    */
#define RFH23       0x0080  /* Enable Automatic Remote Frame Handling For Mailbox 23    */
#define RFH24       0x0100  /* Enable Automatic Remote Frame Handling For Mailbox 24    */
#define RFH25       0x0200  /* Enable Automatic Remote Frame Handling For Mailbox 25    */
#define RFH26       0x0400  /* Enable Automatic Remote Frame Handling For Mailbox 26    */
#define RFH27       0x0800  /* Enable Automatic Remote Frame Handling For Mailbox 27    */
#define RFH28       0x1000  /* Enable Automatic Remote Frame Handling For Mailbox 28    */
#define RFH29       0x2000  /* Enable Automatic Remote Frame Handling For Mailbox 29    */
#define RFH30       0x4000  /* Enable Automatic Remote Frame Handling For Mailbox 30    */
#define RFH31       0x8000  /* Enable Automatic Remote Frame Handling For Mailbox 31    */

/* CAN_MBTIF1 Masks                                                 */
#define MBTIF0      0x0001  /* TX Interrupt Active In Mailbox 0     */
#define MBTIF1      0x0002  /* TX Interrupt Active In Mailbox 1     */
#define MBTIF2      0x0004  /* TX Interrupt Active In Mailbox 2     */
#define MBTIF3      0x0008  /* TX Interrupt Active In Mailbox 3     */
#define MBTIF4      0x0010  /* TX Interrupt Active In Mailbox 4     */
#define MBTIF5      0x0020  /* TX Interrupt Active In Mailbox 5     */
#define MBTIF6      0x0040  /* TX Interrupt Active In Mailbox 6     */
#define MBTIF7      0x0080  /* TX Interrupt Active In Mailbox 7     */
#define MBTIF8      0x0100  /* TX Interrupt Active In Mailbox 8     */
#define MBTIF9      0x0200  /* TX Interrupt Active In Mailbox 9     */
#define MBTIF10     0x0400  /* TX Interrupt Active In Mailbox 10    */
#define MBTIF11     0x0800  /* TX Interrupt Active In Mailbox 11    */
#define MBTIF12     0x1000  /* TX Interrupt Active In Mailbox 12    */
#define MBTIF13     0x2000  /* TX Interrupt Active In Mailbox 13    */
#define MBTIF14     0x4000  /* TX Interrupt Active In Mailbox 14    */
#define MBTIF15     0x8000  /* TX Interrupt Active In Mailbox 15    */

/* CAN_MBTIF2 Masks                                                 */
#define MBTIF16     0x0001  /* TX Interrupt Active In Mailbox 16    */
#define MBTIF17     0x0002  /* TX Interrupt Active In Mailbox 17    */
#define MBTIF18     0x0004  /* TX Interrupt Active In Mailbox 18    */
#define MBTIF19     0x0008  /* TX Interrupt Active In Mailbox 19    */
#define MBTIF20     0x0010  /* TX Interrupt Active In Mailbox 20    */
#define MBTIF21     0x0020  /* TX Interrupt Active In Mailbox 21    */
#define MBTIF22     0x0040  /* TX Interrupt Active In Mailbox 22    */
#define MBTIF23     0x0080  /* TX Interrupt Active In Mailbox 23    */
#define MBTIF24     0x0100  /* TX Interrupt Active In Mailbox 24    */
#define MBTIF25     0x0200  /* TX Interrupt Active In Mailbox 25    */
#define MBTIF26     0x0400  /* TX Interrupt Active In Mailbox 26    */
#define MBTIF27     0x0800  /* TX Interrupt Active In Mailbox 27    */
#define MBTIF28     0x1000  /* TX Interrupt Active In Mailbox 28    */
#define MBTIF29     0x2000  /* TX Interrupt Active In Mailbox 29    */
#define MBTIF30     0x4000  /* TX Interrupt Active In Mailbox 30    */
#define MBTIF31     0x8000  /* TX Interrupt Active In Mailbox 31    */

/* CAN_MBRIF1 Masks                                                 */
#define MBRIF0      0x0001  /* RX Interrupt Active In Mailbox 0     */
#define MBRIF1      0x0002  /* RX Interrupt Active In Mailbox 1     */
#define MBRIF2      0x0004  /* RX Interrupt Active In Mailbox 2     */
#define MBRIF3      0x0008  /* RX Interrupt Active In Mailbox 3     */
#define MBRIF4      0x0010  /* RX Interrupt Active In Mailbox 4     */
#define MBRIF5      0x0020  /* RX Interrupt Active In Mailbox 5     */
#define MBRIF6      0x0040  /* RX Interrupt Active In Mailbox 6     */
#define MBRIF7      0x0080  /* RX Interrupt Active In Mailbox 7     */
#define MBRIF8      0x0100  /* RX Interrupt Active In Mailbox 8     */
#define MBRIF9      0x0200  /* RX Interrupt Active In Mailbox 9     */
#define MBRIF10     0x0400  /* RX Interrupt Active In Mailbox 10    */
#define MBRIF11     0x0800  /* RX Interrupt Active In Mailbox 11    */
#define MBRIF12     0x1000  /* RX Interrupt Active In Mailbox 12    */
#define MBRIF13     0x2000  /* RX Interrupt Active In Mailbox 13    */
#define MBRIF14     0x4000  /* RX Interrupt Active In Mailbox 14    */
#define MBRIF15     0x8000  /* RX Interrupt Active In Mailbox 15    */

/* CAN_MBRIF2 Masks                                                 */
#define MBRIF16     0x0001  /* RX Interrupt Active In Mailbox 16    */
#define MBRIF17     0x0002  /* RX Interrupt Active In Mailbox 17    */
#define MBRIF18     0x0004  /* RX Interrupt Active In Mailbox 18    */
#define MBRIF19     0x0008  /* RX Interrupt Active In Mailbox 19    */
#define MBRIF20     0x0010  /* RX Interrupt Active In Mailbox 20    */
#define MBRIF21     0x0020  /* RX Interrupt Active In Mailbox 21    */
#define MBRIF22     0x0040  /* RX Interrupt Active In Mailbox 22    */
#define MBRIF23     0x0080  /* RX Interrupt Active In Mailbox 23    */
#define MBRIF24     0x0100  /* RX Interrupt Active In Mailbox 24    */
#define MBRIF25     0x0200  /* RX Interrupt Active In Mailbox 25    */
#define MBRIF26     0x0400  /* RX Interrupt Active In Mailbox 26    */
#define MBRIF27     0x0800  /* RX Interrupt Active In Mailbox 27    */
#define MBRIF28     0x1000  /* RX Interrupt Active In Mailbox 28    */
#define MBRIF29     0x2000  /* RX Interrupt Active In Mailbox 29    */
#define MBRIF30     0x4000  /* RX Interrupt Active In Mailbox 30    */
#define MBRIF31     0x8000  /* RX Interrupt Active In Mailbox 31    */

/* CAN_MBIM1 Masks                                              */
#define MBIM0       0x0001  /* Enable Interrupt For Mailbox 0   */
#define MBIM1       0x0002  /* Enable Interrupt For Mailbox 1   */
#define MBIM2       0x0004  /* Enable Interrupt For Mailbox 2   */
#define MBIM3       0x0008  /* Enable Interrupt For Mailbox 3   */
#define MBIM4       0x0010  /* Enable Interrupt For Mailbox 4   */
#define MBIM5       0x0020  /* Enable Interrupt For Mailbox 5   */
#define MBIM6       0x0040  /* Enable Interrupt For Mailbox 6   */
#define MBIM7       0x0080  /* Enable Interrupt For Mailbox 7   */
#define MBIM8       0x0100  /* Enable Interrupt For Mailbox 8   */
#define MBIM9       0x0200  /* Enable Interrupt For Mailbox 9   */
#define MBIM10      0x0400  /* Enable Interrupt For Mailbox 10  */
#define MBIM11      0x0800  /* Enable Interrupt For Mailbox 11  */
#define MBIM12      0x1000  /* Enable Interrupt For Mailbox 12  */
#define MBIM13      0x2000  /* Enable Interrupt For Mailbox 13  */
#define MBIM14      0x4000  /* Enable Interrupt For Mailbox 14  */
#define MBIM15      0x8000  /* Enable Interrupt For Mailbox 15  */

/* CAN_MBIM2 Masks                                              */
#define MBIM16      0x0001  /* Enable Interrupt For Mailbox 16  */
#define MBIM17      0x0002  /* Enable Interrupt For Mailbox 17  */
#define MBIM18      0x0004  /* Enable Interrupt For Mailbox 18  */
#define MBIM19      0x0008  /* Enable Interrupt For Mailbox 19  */
#define MBIM20      0x0010  /* Enable Interrupt For Mailbox 20  */
#define MBIM21      0x0020  /* Enable Interrupt For Mailbox 21  */
#define MBIM22      0x0040  /* Enable Interrupt For Mailbox 22  */
#define MBIM23      0x0080  /* Enable Interrupt For Mailbox 23  */
#define MBIM24      0x0100  /* Enable Interrupt For Mailbox 24  */
#define MBIM25      0x0200  /* Enable Interrupt For Mailbox 25  */
#define MBIM26      0x0400  /* Enable Interrupt For Mailbox 26  */
#define MBIM27      0x0800  /* Enable Interrupt For Mailbox 27  */
#define MBIM28      0x1000  /* Enable Interrupt For Mailbox 28  */
#define MBIM29      0x2000  /* Enable Interrupt For Mailbox 29  */
#define MBIM30      0x4000  /* Enable Interrupt For Mailbox 30  */
#define MBIM31      0x8000  /* Enable Interrupt For Mailbox 31  */

/* CAN_GIM Masks                                                                */
#define EWTIM       0x0001  /* Enable TX Error Count Interrupt                  */
#define EWRIM       0x0002  /* Enable RX Error Count Interrupt                  */
#define EPIM        0x0004  /* Enable Error-Passive Mode Interrupt              */
#define BOIM        0x0008  /* Enable Bus Off Interrupt                         */
#define WUIM        0x0010  /* Enable Wake-Up Interrupt                         */
#define UIAIM       0x0020  /* Enable Access To Unimplemented Address Interrupt */
#define AAIM        0x0040  /* Enable Abort Acknowledge Interrupt               */
#define RMLIM       0x0080  /* Enable RX Message Lost Interrupt                 */
#define UCEIM       0x0100  /* Enable Universal Counter Overflow Interrupt      */
#define EXTIM       0x0200  /* Enable External Trigger Output Interrupt         */
#define ADIM        0x0400  /* Enable Access Denied Interrupt                   */

/* CAN_GIS Masks                                                            */
#define EWTIS       0x0001  /* TX Error Count IRQ Status                    */
#define EWRIS       0x0002  /* RX Error Count IRQ Status                    */
#define EPIS        0x0004  /* Error-Passive Mode IRQ Status                */
#define BOIS        0x0008  /* Bus Off IRQ Status                           */
#define WUIS        0x0010  /* Wake-Up IRQ Status                           */
#define UIAIS       0x0020  /* Access To Unimplemented Address IRQ Status   */
#define AAIS        0x0040  /* Abort Acknowledge IRQ Status                 */
#define RMLIS       0x0080  /* RX Message Lost IRQ Status                   */
#define UCEIS       0x0100  /* Universal Counter Overflow IRQ Status        */
#define EXTIS       0x0200  /* External Trigger Output IRQ Status           */
#define ADIS        0x0400  /* Access Denied IRQ Status                     */

/* CAN_GIF Masks                                                            */
#define EWTIF       0x0001  /* TX Error Count IRQ Flag                      */
#define EWRIF       0x0002  /* RX Error Count IRQ Flag                      */
#define EPIF        0x0004  /* Error-Passive Mode IRQ Flag                  */
#define BOIF        0x0008  /* Bus Off IRQ Flag                             */
#define WUIF        0x0010  /* Wake-Up IRQ Flag                             */
#define UIAIF       0x0020  /* Access To Unimplemented Address IRQ Flag     */
#define AAIF        0x0040  /* Abort Acknowledge IRQ Flag                   */
#define RMLIF       0x0080  /* RX Message Lost IRQ Flag                     */
#define UCEIF       0x0100  /* Universal Counter Overflow IRQ Flag          */
#define EXTIF       0x0200  /* External Trigger Output IRQ Flag             */
#define ADIF        0x0400  /* Access Denied IRQ Flag                       */

/* CAN_UCCNF Masks                                                          */
#define UCCNF       0x000F  /* Universal Counter Mode                       */
#define UC_STAMP    0x0001  /*      Timestamp Mode                          */
#define UC_WDOG     0x0002  /*      Watchdog Mode                           */
#define UC_AUTOTX   0x0003  /*      Auto-Transmit Mode                      */
#define UC_ERROR    0x0006  /*      CAN Error Frame Count                   */
#define UC_OVER     0x0007  /*      CAN Overload Frame Count                */
#define UC_LOST     0x0008  /*      Arbitration Lost During TX Count        */
#define UC_AA       0x0009  /*      TX Abort Count                          */
#define UC_TA       0x000A  /*      TX Successful Count                     */
#define UC_REJECT   0x000B  /*      RX Message Rejected Count               */
#define UC_RML      0x000C  /*      RX Message Lost Count                   */
#define UC_RX       0x000D  /*      Total Successful RX Messages Count      */
#define UC_RMP      0x000E  /*      Successful RX W/Matching ID Count       */
#define UC_ALL      0x000F  /*      Correct Message On CAN Bus Line Count   */
#define UCRC        0x0020  /* Universal Counter Reload/Clear               */
#define UCCT        0x0040  /* Universal Counter CAN Trigger                */
#define UCE         0x0080  /* Universal Counter Enable                     */

/* CAN_ESR Masks                                        */
#define ACKE        0x0004  /* Acknowledge Error        */
#define SER         0x0008  /* Stuff Error              */
#define CRCE        0x0010  /* CRC Error                */
#define SA0         0x0020  /* Stuck At Dominant Error  */
#define BEF         0x0040  /* Bit Error Flag           */
#define FER         0x0080  /* Form Error Flag          */

/* CAN_EWR Masks                                                */
#define EWLREC      0x00FF  /* RX Error Count Limit (For EWRIS) */
#define EWLTEC      0xFF00  /* TX Error Count Limit (For EWTIS) */


/* ************  ADC Controller Module (ACM) MASKS  ***************/

/* Bit masks for ACM_CTL */
#define ACM_EN              0x0001
#define ACM_TMR0_EN         0x0002
#define ACM_TMR1_EN         0x0004
#define ACM_TRG_SEL0        0x0018
#define ACM_TRG_SEL1        0x0060
#define ACM_TRG_POL0        0x0080
#define ACM_TRG_POL1        0x0100
#define ACM_CS_POL          0x0200
#define ACM_CLK_POL         0x0400
#define ACM_EPS             0xC000

/* Bit masks for ACM_STAT */
#define ACM_BSY             0x0001
#define ACM_EMISS           0x0002
#define ACM_ECOM            0x0004
#define ACM_CEVNT           0x0078

/* Bit masks for ACM_ES */
#define ACM_ES0             0x0001
#define ACM_ES1             0x0002
#define ACM_ES2             0x0004
#define ACM_ES3             0x0008
#define ACM_ES4             0x0010
#define ACM_ES5             0x0020
#define ACM_ES6             0x0040
#define ACM_ES7             0x0080
#define ACM_ES8             0x0100
#define ACM_ES9             0x0200
#define ACM_ES10            0x0400
#define ACM_ES11            0x0800
#define ACM_ES12            0x1000
#define ACM_ES13            0x2000
#define ACM_ES14            0x4000
#define ACM_ES15            0x8000

/* Bit masks for ACM_IMSK */
#define ACM_IE0             0x0001
#define ACM_IE1             0x0002
#define ACM_IE2             0x0004
#define ACM_IE3             0x0008
#define ACM_IE4             0x0010
#define ACM_IE5             0x0020
#define ACM_IE6             0x0040
#define ACM_IE7             0x0080
#define ACM_IE8             0x0100
#define ACM_IE9             0x0200
#define ACM_IE10            0x0400
#define ACM_IE11            0x0800
#define ACM_IE12            0x1000
#define ACM_IE13            0x2000
#define ACM_IE14            0x4000
#define ACM_IE15            0x8000

/* Bit masks for ACM_MS */
#define ACM_EM0             0x0001
#define ACM_EM1             0x0002
#define ACM_EM2             0x0004
#define ACM_EM3             0x0008
#define ACM_EM4             0x0010
#define ACM_EM5             0x0020
#define ACM_EM6             0x0040
#define ACM_EM7             0x0080
#define ACM_EM8             0x0100
#define ACM_EM9             0x0200
#define ACM_EM10            0x0400
#define ACM_EM11            0x0800
#define ACM_EM12            0x1000
#define ACM_EM13            0x2000
#define ACM_EM14            0x4000
#define ACM_EM15            0x8000

/* Bit masks for ACM_EMSK */
#define ACM_MIE0             0x0001
#define ACM_MIE1             0x0002
#define ACM_MIE2             0x0004
#define ACM_MIE3             0x0008
#define ACM_MIE4             0x0010
#define ACM_MIE5             0x0020
#define ACM_MIE6             0x0040
#define ACM_MIE7             0x0080
#define ACM_MIE8             0x0100
#define ACM_MIE9             0x0200
#define ACM_MIE10            0x0400
#define ACM_MIE11            0x0800
#define ACM_MIE12            0x1000
#define ACM_MIE13            0x2000
#define ACM_MIE14            0x4000
#define ACM_MIE15            0x8000

/* Bit masks for ACM_ER0 & ACM_ER1 */
#define ACM_EVNT_EN          0x0001
#define ACM_EVNT_PF          0x003E

/* Bit masks for ACM_ET0 & ACM_ET1 */
#define ACM_EVNT_TIME        0xFFFFFFFF

/* Bit masks for ACM_TC0 */
#define ACM_CLK_DIV          0x00FF
#define ACM_SC               0xFF00

/* Bit masks for ACM_TC1 */
#define ACM_CSW              0x00FF
#define ACM_HC               0x0F00
#define ACM_ZC               0xF000

#ifdef _MISRA_RULES
#pragma diag(pop)
#endif /* _MISRA_RULES */

#endif /* _DEF_BF50x_H */