Cleanup: convert gforge task ID's to phabricator format

Cleanup old tracker task format to the new. e.g: [#34039] to T34039

Ref D8718

9 files changed, 18 insertions, 19 deletions

diff --git a/source/blender/editors/transform/transform.c b/source/blender/editors/transform/transform.c
index 7ed276e45de..a0374d733ea 100644
--- a/source/blender/editors/transform/transform.c
+++ b/source/blender/editors/transform/transform.c
@@ -349,7 +349,7 @@ void projectFloatViewEx(TransInfo *t, const float vec[3], float adr[2], const eV
         adr[1] = vec[1];
       }
       else if (t->region->regiontype == RGN_TYPE_WINDOW) {
-        /* allow points behind the view [#33643] */
+        /* allow points behind the view T33643. */
         if (ED_view3d_project_float_global(t->region, vec, adr, flag) != V3D_PROJ_RET_OK) {
           /* XXX, 2.64 and prior did this, weak! */
           adr[0] = t->region->winx / 2.0f;
@@ -1233,7 +1233,7 @@ int transformEvent(TransInfo *t, const wmEvent *event)
 
   /* Per transform event, if present */
   if (t->handleEvent && (!handled ||
-                         /* Needed for vertex slide, see [#38756] */
+                         /* Needed for vertex slide, see T38756. */
                          (event->type == MOUSEMOVE))) {
     t->redraw |= t->handleEvent(t, event);
   }
@@ -1794,7 +1794,7 @@ bool initTransform(bContext *C, TransInfo *t, wmOperator *op, const wmEvent *eve
      *
      * Do this only for translation/rotation/resize because only these
      * modes are available from gizmo and doing such check could
-     * lead to keymap conflicts for other modes (see #31584)
+     * lead to keymap conflicts for other modes (see T31584)
      */
     if (ELEM(mode, TFM_TRANSLATION, TFM_ROTATION, TFM_RESIZE)) {
       wmKeyMapItem *kmi;
diff --git a/source/blender/editors/transform/transform_convert.c b/source/blender/editors/transform/transform_convert.c
index 1785d3eb5fe..c23ee5b771c 100644
--- a/source/blender/editors/transform/transform_convert.c
+++ b/source/blender/editors/transform/transform_convert.c
@@ -831,8 +831,7 @@ bool constraints_list_needinv(TransInfo *t, ListBase *list)
         }
         else if (con->type == CONSTRAINT_TYPE_TRANSFORM) {
           /* Transform constraint needs it for rotation at least (r.57309),
-           * but doing so when translating may also mess things up [#36203]
-           */
+           * but doing so when translating may also mess things up, see: T36203. */
           bTransformConstraint *data = (bTransformConstraint *)con->data;
 
           if (data->to == TRANS_ROTATION) {
@@ -1102,8 +1101,8 @@ void createTransData(bContext *C, TransInfo *t)
     convert_type = TC_POSE;
   }
   else if (ob && (ob->mode & OB_MODE_ALL_WEIGHT_PAINT) && !(t->options & CTX_PAINT_CURVE)) {
-    /* important that ob_armature can be set even when its not selected [#23412]
-     * lines below just check is also visible */
+    /* Important that ob_armature can be set even when its not selected T23412.
+     * Lines below just check is also visible. */
     Object *ob_armature = BKE_modifiers_is_deformed_by_armature(ob);
     if (ob_armature && ob_armature->mode & OB_MODE_POSE) {
       Base *base_arm = BKE_view_layer_base_find(t->view_layer, ob_armature);
@@ -1161,7 +1160,7 @@ void createTransData(bContext *C, TransInfo *t)
       break;
     case TC_POSE:
       createTransPose(t);
-      /* Disable PET, its not usable in pose mode yet [#32444] */
+      /* Disable PET, its not usable in pose mode yet T32444. */
       init_prop_edit = false;
       break;
     case TC_ARMATURE_VERTS:
diff --git a/source/blender/editors/transform/transform_convert_armature.c b/source/blender/editors/transform/transform_convert_armature.c
index 5cc6a62894d..dd35ed3cbf5 100644
--- a/source/blender/editors/transform/transform_convert_armature.c
+++ b/source/blender/editors/transform/transform_convert_armature.c
@@ -1264,7 +1264,7 @@ void recalcData_edit_armature(TransInfo *t)
             rotation_between_vecs_to_quat(qrot, td->axismtx[1], vec);
             mul_qt_v3(qrot, up_axis);
 
-            /* roll has a tendency to flip in certain orientations - [#34283], [#33974] */
+            /* roll has a tendency to flip in certain orientations - T34283, T33974. */
             roll = ED_armature_ebone_roll_to_vector(ebo, up_axis, false);
             ebo->roll = angle_compat_rad(roll, td->ival);
           }
@@ -1643,7 +1643,7 @@ static short apply_targetless_ik(Object *ob)
           normalize_m3(rmat3);
 
           /* rotation */
-          /* [#22409] is partially caused by this, as slight numeric error introduced during
+          /* T22409 is partially caused by this, as slight numeric error introduced during
            * the solving process leads to locked-axis values changing. However, we cannot modify
            * the values here, or else there are huge discrepancies between IK-solver (interactive)
            * and applied poses. */
@@ -1743,7 +1743,7 @@ void special_aftertrans_update__pose(bContext *C, TransInfo *t)
       if ((t->flag & T_AUTOIK) && (t->options & CTX_AUTOCONFIRM)) {
         /* when running transform non-interactively (operator exec),
          * we need to update the pose otherwise no updates get called during
-         * transform and the auto-ik is not applied. see [#26164] */
+         * transform and the auto-ik is not applied. see T26164. */
         struct Object *pose_ob = tc->poseobj;
         BKE_pose_where_is(t->depsgraph, t->scene, pose_ob);
       }
diff --git a/source/blender/editors/transform/transform_convert_mesh.c b/source/blender/editors/transform/transform_convert_mesh.c
index e7a4966bd6f..835781d458f 100644
--- a/source/blender/editors/transform/transform_convert_mesh.c
+++ b/source/blender/editors/transform/transform_convert_mesh.c
@@ -1568,7 +1568,7 @@ void recalcData_mesh(TransInfo *t)
   bool is_canceling = t->state == TRANS_CANCEL;
   /* mirror modifier clipping? */
   if (!is_canceling) {
-    /* apply clipping after so we never project past the clip plane [#25423] */
+    /* apply clipping after so we never project past the clip plane T25423. */
     applyProject(t);
     clipMirrorModifier(t);
 
diff --git a/source/blender/editors/transform/transform_convert_nla.c b/source/blender/editors/transform/transform_convert_nla.c
index 241e65f3251..afebf1c46a4 100644
--- a/source/blender/editors/transform/transform_convert_nla.c
+++ b/source/blender/editors/transform/transform_convert_nla.c
@@ -445,7 +445,7 @@ void recalcData_nla(TransInfo *t)
      * (e.g. for transition strips, the values are taken from the neighbors)
      *
      * NOTE: we write these twice to avoid truncation errors which can arise when
-     * moving the strips a large distance using numeric input [#33852]
+     * moving the strips a large distance using numeric input T33852.
      */
     RNA_pointer_create(NULL, &RNA_NlaStrip, strip, &strip_ptr);
 
diff --git a/source/blender/editors/transform/transform_convert_sequencer.c b/source/blender/editors/transform/transform_convert_sequencer.c
index e298061cb6b..80ce4770984 100644
--- a/source/blender/editors/transform/transform_convert_sequencer.c
+++ b/source/blender/editors/transform/transform_convert_sequencer.c
@@ -629,7 +629,7 @@ void createTransSeqData(TransInfo *t)
  * \{ */
 
 /* commented _only_ because the meta may have animation data which
- * needs moving too [#28158] */
+ * needs moving too T28158. */
 
 #define SEQ_TX_NESTED_METAS
 
@@ -739,7 +739,7 @@ static void flushTransSeq(TransInfo *t)
   if (ELEM(t->mode, TFM_SEQ_SLIDE, TFM_TIME_TRANSLATE)) {
     /* Special annoying case here, need to calc metas with TFM_TIME_EXTEND only */
 
-    /* calc all meta's then effects [#27953] */
+    /* calc all meta's then effects T27953. */
     for (seq = seqbasep->first; seq; seq = seq->next) {
       if (seq->type == SEQ_TYPE_META && seq->flag & SELECT) {
         BKE_sequence_calc(t->scene, seq);
diff --git a/source/blender/editors/transform/transform_input.c b/source/blender/editors/transform/transform_input.c
index ce35a9f55ef..7e921d4fc3d 100644
--- a/source/blender/editors/transform/transform_input.c
+++ b/source/blender/editors/transform/transform_input.c
@@ -67,7 +67,7 @@ static void InputSpringFlip(TransInfo *t, MouseInput *mi, const double mval[2],
   InputSpring(t, mi, mval, output);
 
   /* flip scale */
-  /* values can become really big when zoomed in so use longs [#26598] */
+  /* values can become really big when zoomed in so use longs T26598. */
   if (((int64_t)((int)mi->center[0] - mval[0]) * (int64_t)((int)mi->center[0] - mi->imval[0]) +
        (int64_t)((int)mi->center[1] - mval[1]) * (int64_t)((int)mi->center[1] - mi->imval[1])) <
       0) {
diff --git a/source/blender/editors/transform/transform_mode_edge_slide.c b/source/blender/editors/transform/transform_mode_edge_slide.c
index 7d0e555e362..0c38ba588c1 100644
--- a/source/blender/editors/transform/transform_mode_edge_slide.c
+++ b/source/blender/editors/transform/transform_mode_edge_slide.c
@@ -389,7 +389,7 @@ static void calcEdgeSlide_mval_range(TransInfo *t,
         continue;
       }
 
-      /* This test is only relevant if object is not wire-drawn! See [#32068]. */
+      /* This test is only relevant if object is not wire-drawn! See T32068. */
       bool is_visible = !use_occlude_geometry ||
                         BMBVH_EdgeVisible(bmbvh, e, t->depsgraph, region, v3d, tc->obedit);
 
@@ -720,7 +720,7 @@ static EdgeSlideData *createEdgeSlideVerts_double_side(TransInfo *t, TransDataCo
       BMVert *v_prev;
       BMEdge *e_prev;
 
-      /* XXX, 'sv' will initialize multiple times, this is suspicious. see [#34024] */
+      /* XXX, 'sv' will initialize multiple times, this is suspicious. see T34024. */
       BLI_assert(v != NULL);
       BLI_assert(sv_table[BM_elem_index_get(v)] != INDEX_INVALID);
       sv = SV_FROM_VERT(v);
diff --git a/source/blender/editors/transform/transform_orientations.c b/source/blender/editors/transform/transform_orientations.c
index dc693bd6b15..b97c8093230 100644
--- a/source/blender/editors/transform/transform_orientations.c
+++ b/source/blender/editors/transform/transform_orientations.c
@@ -485,7 +485,7 @@ short ED_transform_calc_orientation_from_type_ex(const bContext *C,
       if (ob) {
         if (ob->mode & OB_MODE_POSE) {
           /* each bone moves on its own local axis, but  to avoid confusion,
-           * use the active pones axis for display [#33575], this works as expected on a single
+           * use the active pones axis for display T33575, this works as expected on a single
            * bone and users who select many bones will understand what's going on and what local
            * means when they start transforming */
           ED_getTransformOrientationMatrix(C, ob, obedit, pivot_point, r_mat);