diff options
Diffstat (limited to 'source/blender/blenkernel/intern/mesh.c')
-rw-r--r-- | source/blender/blenkernel/intern/mesh.c | 186 |
1 files changed, 64 insertions, 122 deletions
diff --git a/source/blender/blenkernel/intern/mesh.c b/source/blender/blenkernel/intern/mesh.c index b89541173e1..2e725cbfbfd 100644 --- a/source/blender/blenkernel/intern/mesh.c +++ b/source/blender/blenkernel/intern/mesh.c @@ -2059,6 +2059,12 @@ void BKE_mesh_mselect_active_set(Mesh *me, int index, int type) (me->mselect[me->totselect - 1].type == type)); } +/** + * Compute 'split' (aka loop, or per face corner's) normals. + * + * \param r_lnors_spacearr Allows to get computed loop normal space array. That data, among other things, + * contains 'smooth fan' info, useful e.g. to split geometry along sharp edges... + */ void BKE_mesh_calc_normals_split_ex(Mesh *mesh, MLoopNorSpaceArray *r_lnors_spacearr) { float (*r_loopnors)[3]; @@ -2094,7 +2100,10 @@ void BKE_mesh_calc_normals_split_ex(Mesh *mesh, MLoopNorSpaceArray *r_lnors_spac BKE_mesh_normals_loop_split( mesh->mvert, mesh->totvert, mesh->medge, mesh->totedge, mesh->mloop, r_loopnors, mesh->totloop, mesh->mpoly, (const float (*)[3])polynors, mesh->totpoly, - (mesh->flag & ME_AUTOSMOOTH) != 0, mesh->smoothresh, r_lnors_spacearr, clnors, NULL); + /* Note that we enforce computing clnors when the clnor space array is requested by caller here. + * However, we obviously only use the autosmooth angle threshold only in case autosmooth is enabled. */ + r_lnors_spacearr != NULL, (mesh->flag & ME_AUTOSMOOTH) != 0 ? mesh->smoothresh : (float)M_PI, + r_lnors_spacearr, clnors, NULL); if (free_polynors) { MEM_freeN(polynors); @@ -2126,118 +2135,70 @@ typedef struct SplitFaceNewEdge { /* Detect needed new vertices, and update accordingly loops' vertex indices. * WARNING! Leaves mesh in invalid state. */ static int split_faces_prepare_new_verts( - const Mesh *mesh, MLoopNorSpaceArray *lnors_spacearr, SplitFaceNewVert **new_verts, MemArena *memarena, - bool *r_need_vnors_recalc) + const Mesh *mesh, MLoopNorSpaceArray *lnors_spacearr, SplitFaceNewVert **new_verts, MemArena *memarena) { - /* Note: if lnors_spacearr is NULL, ther is no autosmooth handling, and we only split out flat polys. */ + /* This is now mandatory, trying to do the job in simple way without that data is doomed to fail, even when only + * dealing with smooth/flat faces one can find cases that no simple algorithm can handle properly. */ + BLI_assert(lnors_spacearr != NULL); + const int num_loops = mesh->totloop; int num_verts = mesh->totvert; MVert *mvert = mesh->mvert; MLoop *mloop = mesh->mloop; BLI_bitmap *verts_used = BLI_BITMAP_NEW(num_verts, __func__); + BLI_bitmap *done_loops = BLI_BITMAP_NEW(num_loops, __func__); - if (lnors_spacearr) { - BLI_bitmap *done_loops = BLI_BITMAP_NEW(num_loops, __func__); - - MLoop *ml = mloop; - MLoopNorSpace **lnor_space = lnors_spacearr->lspacearr; - for (int loop_idx = 0; loop_idx < num_loops; loop_idx++, ml++, lnor_space++) { - if (!BLI_BITMAP_TEST(done_loops, loop_idx)) { - const int vert_idx = ml->v; - const bool vert_used = BLI_BITMAP_TEST_BOOL(verts_used, vert_idx); - /* If vert is already used by another smooth fan, we need a new vert for this one. */ - const int new_vert_idx = vert_used ? num_verts++ : vert_idx; - - BLI_assert(*lnor_space); - - if ((*lnor_space)->loops) { - for (LinkNode *lnode = (*lnor_space)->loops; lnode; lnode = lnode->next) { - const int ml_fan_idx = GET_INT_FROM_POINTER(lnode->link); - BLI_BITMAP_ENABLE(done_loops, ml_fan_idx); - if (vert_used) { - mloop[ml_fan_idx].v = new_vert_idx; - } - } - } - else { - /* Single loop in this fan... */ - BLI_BITMAP_ENABLE(done_loops, loop_idx); + MLoop *ml = mloop; + MLoopNorSpace **lnor_space = lnors_spacearr->lspacearr; + + for (int loop_idx = 0; loop_idx < num_loops; loop_idx++, ml++, lnor_space++) { + if (!BLI_BITMAP_TEST(done_loops, loop_idx)) { + const int vert_idx = ml->v; + const bool vert_used = BLI_BITMAP_TEST_BOOL(verts_used, vert_idx); + /* If vert is already used by another smooth fan, we need a new vert for this one. */ + const int new_vert_idx = vert_used ? num_verts++ : vert_idx; + + BLI_assert(*lnor_space); + + if ((*lnor_space)->loops) { + for (LinkNode *lnode = (*lnor_space)->loops; lnode; lnode = lnode->next) { + const int ml_fan_idx = GET_INT_FROM_POINTER(lnode->link); + BLI_BITMAP_ENABLE(done_loops, ml_fan_idx); if (vert_used) { - ml->v = new_vert_idx; + mloop[ml_fan_idx].v = new_vert_idx; } } - - if (!vert_used) { - BLI_BITMAP_ENABLE(verts_used, vert_idx); - /* We need to update that vertex's normal here, we won't go over it again. */ - /* This is important! *DO NOT* set vnor to final computed lnor, vnor should always be defined to - * 'automatic normal' value computed from its polys, not some custom normal. - * Fortunately, that's the loop normal space's 'lnor' reference vector. ;) */ - normal_float_to_short_v3(mvert[vert_idx].no, (*lnor_space)->vec_lnor); - } - else { - /* Add new vert to list. */ - SplitFaceNewVert *new_vert = BLI_memarena_alloc(memarena, sizeof(*new_vert)); - new_vert->orig_index = vert_idx; - new_vert->new_index = new_vert_idx; - new_vert->vnor = (*lnor_space)->vec_lnor; /* See note above. */ - new_vert->next = *new_verts; - *new_verts = new_vert; - } } - } - - MEM_freeN(done_loops); - } - else { - /* No loop normal spaces available, we only split out flat polys. */ - const int num_polys = mesh->totpoly; - const MPoly *mpoly = mesh->mpoly; - - /* We do that in two loops, to keep original edges/verts to smooth polys preferencially. */ - const MPoly *mp = mpoly; - for (int i = 0; i < num_polys; i++, mp++) { - if (mp->flag & ME_SMOOTH) { - const MLoop *ml = &mloop[mp->loopstart]; - for (int j = 0; j < mp->totloop; j++, ml++) { - /* Just mark the vertex as used/reserved, that way neighbor flat polys, if any, - * will have to create their own. */ - BLI_BITMAP_ENABLE(verts_used, ml->v); + else { + /* Single loop in this fan... */ + BLI_BITMAP_ENABLE(done_loops, loop_idx); + if (vert_used) { + ml->v = new_vert_idx; } } - } - mp = mpoly; - for (int i = 0; i < num_polys; i++, mp++) { - if (!(mp->flag & ME_SMOOTH)) { - MLoop *ml = &mloop[mp->loopstart]; - for (int j = 0; j < mp->totloop; j++, ml++) { - const int vert_idx = ml->v; - - if (BLI_BITMAP_TEST(verts_used, vert_idx)) { - /* Add new vert to list. */ - const int new_vert_idx = num_verts++; - ml->v = new_vert_idx; - - SplitFaceNewVert *new_vert = BLI_memarena_alloc(memarena, sizeof(*new_vert)); - new_vert->orig_index = vert_idx; - new_vert->new_index = new_vert_idx; - new_vert->vnor = NULL; /* See note below about normals. */ - new_vert->next = *new_verts; - *new_verts = new_vert; - } - else { - BLI_BITMAP_ENABLE(verts_used, vert_idx); - } - } - /* Note: there is no way to get new normals for smooth vertices here (and we don't have direct access - * to poly normals either for flat ones), so we'll have to recompute all vnors at the end... */ - *r_need_vnors_recalc = true; + if (!vert_used) { + BLI_BITMAP_ENABLE(verts_used, vert_idx); + /* We need to update that vertex's normal here, we won't go over it again. */ + /* This is important! *DO NOT* set vnor to final computed lnor, vnor should always be defined to + * 'automatic normal' value computed from its polys, not some custom normal. + * Fortunately, that's the loop normal space's 'lnor' reference vector. ;) */ + normal_float_to_short_v3(mvert[vert_idx].no, (*lnor_space)->vec_lnor); + } + else { + /* Add new vert to list. */ + SplitFaceNewVert *new_vert = BLI_memarena_alloc(memarena, sizeof(*new_vert)); + new_vert->orig_index = vert_idx; + new_vert->new_index = new_vert_idx; + new_vert->vnor = (*lnor_space)->vec_lnor; /* See note above. */ + new_vert->next = *new_verts; + *new_verts = new_vert; } } } + MEM_freeN(done_loops); MEM_freeN(verts_used); return num_verts - mesh->totvert; @@ -2356,27 +2317,17 @@ void BKE_mesh_split_faces(Mesh *mesh, bool free_loop_normals) } BKE_mesh_tessface_clear(mesh); - MLoopNorSpaceArray *lnors_spacearr = NULL; - MemArena *memarena; - bool need_vnors_recalc = false; - - if (mesh->flag & ME_AUTOSMOOTH) { - lnors_spacearr = MEM_callocN(sizeof(*lnors_spacearr), __func__); - /* Compute loop normals and loop normal spaces (a.k.a. smooth fans of faces around vertices). */ - BKE_mesh_calc_normals_split_ex(mesh, lnors_spacearr); - /* Stealing memarena from loop normals space array. */ - memarena = lnors_spacearr->mem; - } - else { - /* We still have to split out flat faces... */ - memarena = BLI_memarena_new(BLI_MEMARENA_STD_BUFSIZE, __func__); - } + MLoopNorSpaceArray lnors_spacearr = {NULL}; + /* Compute loop normals and loop normal spaces (a.k.a. smooth fans of faces around vertices). */ + BKE_mesh_calc_normals_split_ex(mesh, &lnors_spacearr); + /* Stealing memarena from loop normals space array. */ + MemArena *memarena = lnors_spacearr.mem; SplitFaceNewVert *new_verts = NULL; SplitFaceNewEdge *new_edges = NULL; /* Detect loop normal spaces (a.k.a. smooth fans) that will need a new vert. */ - const int num_new_verts = split_faces_prepare_new_verts(mesh, lnors_spacearr, &new_verts, memarena, &need_vnors_recalc); + const int num_new_verts = split_faces_prepare_new_verts(mesh, &lnors_spacearr, &new_verts, memarena); if (num_new_verts > 0) { /* Reminder: beyond this point, there is no way out, mesh is in invalid state (due to early-reassignment of @@ -2388,9 +2339,9 @@ void BKE_mesh_split_faces(Mesh *mesh, bool free_loop_normals) /* Reallocate all vert and edge related data. */ mesh->totvert += num_new_verts; - mesh->totedge += num_new_edges; CustomData_realloc(&mesh->vdata, mesh->totvert); if (do_edges) { + mesh->totedge += num_new_edges; CustomData_realloc(&mesh->edata, mesh->totedge); } /* Update pointers to a newly allocated memory. */ @@ -2410,18 +2361,9 @@ void BKE_mesh_split_faces(Mesh *mesh, bool free_loop_normals) CustomData_free_layers(&mesh->ldata, CD_NORMAL, mesh->totloop); } - if (lnors_spacearr) { - /* Also frees new_verts/edges temp data, since we used its memarena to allocate them. */ - BKE_lnor_spacearr_free(lnors_spacearr); - MEM_freeN(lnors_spacearr); - } - else { - BLI_memarena_free(memarena); - } + /* Also frees new_verts/edges temp data, since we used its memarena to allocate them. */ + BKE_lnor_spacearr_free(&lnors_spacearr); - if (need_vnors_recalc) { - BKE_mesh_calc_normals(mesh); - } #ifdef VALIDATE_MESH BKE_mesh_validate(mesh, true, true); #endif |