diff options
Diffstat (limited to 'source/blender/blenlib/intern/freetypefont.c')
-rw-r--r-- | source/blender/blenlib/intern/freetypefont.c | 259 |
1 files changed, 128 insertions, 131 deletions
diff --git a/source/blender/blenlib/intern/freetypefont.c b/source/blender/blenlib/intern/freetypefont.c index 340c68366e1..4acc6234500 100644 --- a/source/blender/blenlib/intern/freetypefont.c +++ b/source/blender/blenlib/intern/freetypefont.c @@ -23,10 +23,14 @@ * The Original Code is written by Rob Haarsma (phase) * All rights reserved. * - * * Contributor(s): none yet. * * ***** END GPL/BL DUAL LICENSE BLOCK ***** + * + * This code parses the Freetype font outline data to chains of Blender's beziertriples. + * Additional information can be found at the bottom of this file. + * + * Code that uses exotic character maps is present but commented out. */ #ifdef WITH_FREETYPE2 @@ -48,126 +52,18 @@ #include "BIF_toolbox.h" +#include "BKE_utildefines.h" + #include "DNA_packedFile_types.h" #include "DNA_curve_types.h" -// increased max to 255, including extended charset (ton) #define myMIN_ASCII 32 #define myMAX_ASCII 255 -// should come from arithb.c -#define MIN2(x,y) ( (x)<(y) ? (x) : (y) ) -#define MAX2(x,y) ( (x)>(y) ? (x) : (y) ) - /* local variables */ static FT_Library library; static FT_Error err; -#if 0 -// Freetype2 Outline struct - -typedef struct FT_Outline_ - { - short n_contours; /* number of contours in glyph */ - short n_points; /* number of points in the glyph */ - - FT_Vector* points; /* the outline's points */ - char* tags; /* the points flags */ - short* contours; /* the contour end points */ - - int flags; /* outline masks */ - - } FT_Outline; -#endif - -/***//* -from: http://www.freetype.org/freetype2/docs/glyphs/glyphs-6.html#section-1 - -Vectorial representation of Freetype glyphs - -The source format of outlines is a collection of closed paths called "contours". Each contour is -made of a series of line segments and bezier arcs. Depending on the file format, these can be -second-order or third-order polynomials. The former are also called quadratic or conic arcs, and -they come from the TrueType format. The latter are called cubic arcs and mostly come from the -Type1 format. - -Each arc is described through a series of start, end and control points. Each point of the outline -has a specific tag which indicates wether it is used to describe a line segment or an arc. - - -The following rules are applied to decompose the contour's points into segments and arcs : - -# two successive "on" points indicate a line segment joining them. - -# one conic "off" point amidst two "on" points indicates a conic bezier arc, the "off" point being - the control point, and the "on" ones the start and end points. - -# Two successive cubic "off" points amidst two "on" points indicate a cubic bezier arc. There must - be exactly two cubic control points and two on points for each cubic arc (using a single cubic - "off" point between two "on" points is forbidden, for example). - -# finally, two successive conic "off" points forces the rasterizer to create (during the scan-line - conversion process exclusively) a virtual "on" point amidst them, at their exact middle. This - greatly facilitates the definition of successive conic bezier arcs. Moreover, it's the way - outlines are described in the TrueType specification. - -Note that it is possible to mix conic and cubic arcs in a single contour, even though no current -font driver produces such outlines. - - * # on - * off - __---__ - #-__ _-- -_ - --__ _- - - --__ # \ - --__ # - -# - Two "on" points - Two "on" points and one "conic" point - between them - - - - * - # __ Two "on" points with two "conic" - \ - - points between them. The point - \ / \ marked '0' is the middle of the - - 0 \ "off" points, and is a 'virtual' - -_ _- # "on" point where the curve passes. - -- It does not appear in the point - list. - * - - - - - * # on - * * off - __---__ - _-- -_ - _- - - # \ - # - - Two "on" points - and two "cubic" point - between them - - -Each glyph's original outline points are located on a grid of indivisible units. The points are stored -in the font file as 16-bit integer grid coordinates, with the grid origin's being at (0,0); they thus -range from -16384 to 16383. - - -Convert conic to bezier arcs: -Conic P0 P1 P2 -Bezier B0 B1 B2 B3 -B0=P0 -B1=(P0+2*P1)/3 -B2=(P2+2*P1)/3 -B3=P2 - -*//****/ static VFontData *objfnt_to_ftvfontdata(PackedFile * pf) { @@ -188,16 +84,12 @@ static VFontData *objfnt_to_ftvfontdata(PackedFile * pf) FT_UShort my_encoding_id = TT_MS_ID_UNICODE_CS; int n; */ - - float scale= 1. / 1024.; //needs text_height from metrics to make a standard linedist + //scale needs text_height from freetype metrics to make a standard linedist, + //is currently set to generic value + float scale= 1. / 1024.; float dx, dy; - int i, j, k, l, m; /* uhoh, kiddie C loops */ - /* i = characters, j = curves/contours, k = points, l = curvepoint, m = first point on curve */ - - // test is used for BIF_printf - char test[2]; + int i, j, k, l, m; - // load the freetype font err = FT_New_Memory_Face( library, pf->data, @@ -227,22 +119,20 @@ static VFontData *objfnt_to_ftvfontdata(PackedFile * pf) // allocate blender font vfd= MEM_callocN(sizeof(*vfd), "FTVFontData"); + strcpy(vfd->name, FT_Get_Postscript_Name(face)); - // extract generic ascii character range (needs international support, dynamic loading of chars, etcetc) + // extract generic ascii character range for(i = myMIN_ASCII; i <= myMAX_ASCII; i++) { + int *npoints; //total points of each contour int *onpoints; //num points on curve - test[0] = i; - test[1] = '\0'; //to print character - glyph_index = FT_Get_Char_Index( face, i ); err = FT_Load_Glyph(face, glyph_index, FT_LOAD_NO_SCALE | FT_LOAD_NO_BITMAP); glyph = face->glyph; ftoutline = glyph->outline; vfd->width[i] = glyph->advance.x* scale; -// BIF_printf("sx %d sy %d", glyph->advance.x, face->glyph->metrics->text_height); npoints = (int *)MEM_callocN((ftoutline.n_contours)* sizeof(int),"endpoints") ; onpoints = (int *)MEM_callocN((ftoutline.n_contours)* sizeof(int),"onpoints") ; @@ -261,8 +151,6 @@ static VFontData *objfnt_to_ftvfontdata(PackedFile * pf) for(k = 0; k < npoints[j]; k++) { if(j > 0) l = k + ftoutline.contours[j - 1] + 1; else l = k; -// if(i == 67) BIF_printf("%d->%s : |k %2d|l %2d|t %2d|", i, test, k, l, ftoutline.n_points); - if(ftoutline.tags[l] == FT_Curve_Tag_On) onpoints[j]++; @@ -273,12 +161,13 @@ static VFontData *objfnt_to_ftvfontdata(PackedFile * pf) } } - //final contour loop, bezier & conic styles merged + //contour loop, bezier & conic styles merged for(j = 0; j < ftoutline.n_contours; j++) { // add new curve nu = (Nurb*)MEM_callocN(sizeof(struct Nurb),"objfnt_nurb"); bezt = (BezTriple*)MEM_callocN((onpoints[j])* sizeof(BezTriple),"objfnt_bezt") ; BLI_addtail(&vfd->nurbsbase[i], nu); + nu->type= CU_BEZIER+CU_2D; nu->pntsu = onpoints[j]; nu->resolu= 8; @@ -301,8 +190,8 @@ static VFontData *objfnt_to_ftvfontdata(PackedFile * pf) bezt->vec[0][1] = (dy + (2 * ftoutline.points[l].y)* scale) / 3.0; //midpoint (virtual on-curve point) - bezt->vec[1][0] = (ftoutline.points[l].x + ftoutline.points[l+1].x)* scale / 2.0; - bezt->vec[1][1] = (ftoutline.points[l].y + ftoutline.points[l+1].y)* scale / 2.0; + bezt->vec[1][0] = dx; + bezt->vec[1][1] = dy; //right handle bezt->vec[2][0] = (dx + (2 * ftoutline.points[l+1].x)* scale) / 3.0; @@ -366,7 +255,6 @@ static VFontData *objfnt_to_ftvfontdata(PackedFile * pf) } } else { //last point on curve if(ftoutline.tags[m] == FT_Curve_Tag_Cubic) { -// okee("hhuh"); bezt->vec[2][0] = ftoutline.points[m].x* scale; bezt->vec[2][1] = ftoutline.points[m].y* scale; bezt->h2= HD_FREE; @@ -475,7 +363,7 @@ VFontData *BLI_vfontdata_from_freetypefont(PackedFile *pf) //init Freetype err = FT_Init_FreeType( &library); if(err) { - error("Failed loading Freetype font library"); + error("Failed to load the Freetype font library"); return 0; } @@ -492,3 +380,112 @@ VFontData *BLI_vfontdata_from_freetypefont(PackedFile *pf) } #endif // WITH_FREETYPE2 + + + +#if 0 + +// Freetype2 Outline struct + +typedef struct FT_Outline_ + { + short n_contours; /* number of contours in glyph */ + short n_points; /* number of points in the glyph */ + + FT_Vector* points; /* the outline's points */ + char* tags; /* the points flags */ + short* contours; /* the contour end points */ + + int flags; /* outline masks */ + + } FT_Outline; + +#endif + +/***//* +from: http://www.freetype.org/freetype2/docs/glyphs/glyphs-6.html#section-1 + +Vectorial representation of Freetype glyphs + +The source format of outlines is a collection of closed paths called "contours". Each contour is +made of a series of line segments and bezier arcs. Depending on the file format, these can be +second-order or third-order polynomials. The former are also called quadratic or conic arcs, and +they come from the TrueType format. The latter are called cubic arcs and mostly come from the +Type1 format. + +Each arc is described through a series of start, end and control points. Each point of the outline +has a specific tag which indicates wether it is used to describe a line segment or an arc. + + +The following rules are applied to decompose the contour's points into segments and arcs : + +# two successive "on" points indicate a line segment joining them. + +# one conic "off" point amidst two "on" points indicates a conic bezier arc, the "off" point being + the control point, and the "on" ones the start and end points. + +# Two successive cubic "off" points amidst two "on" points indicate a cubic bezier arc. There must + be exactly two cubic control points and two on points for each cubic arc (using a single cubic + "off" point between two "on" points is forbidden, for example). + +# finally, two successive conic "off" points forces the rasterizer to create (during the scan-line + conversion process exclusively) a virtual "on" point amidst them, at their exact middle. This + greatly facilitates the definition of successive conic bezier arcs. Moreover, it's the way + outlines are described in the TrueType specification. + +Note that it is possible to mix conic and cubic arcs in a single contour, even though no current +font driver produces such outlines. + + * # on + * off + __---__ + #-__ _-- -_ + --__ _- - + --__ # \ + --__ # + -# + Two "on" points + Two "on" points and one "conic" point + between them + + + + * + # __ Two "on" points with two "conic" + \ - - points between them. The point + \ / \ marked '0' is the middle of the + - 0 \ "off" points, and is a 'virtual' + -_ _- # "on" point where the curve passes. + -- It does not appear in the point + list. + * + + + + + * # on + * * off + __---__ + _-- -_ + _- - + # \ + # + + Two "on" points + and two "cubic" point + between them + + +Each glyph's original outline points are located on a grid of indivisible units. The points are stored +in the font file as 16-bit integer grid coordinates, with the grid origin's being at (0,0); they thus +range from -16384 to 16383. + +Convert conic to bezier arcs: +Conic P0 P1 P2 +Bezier B0 B1 B2 B3 +B0=P0 +B1=(P0+2*P1)/3 +B2=(P2+2*P1)/3 +B3=P2 + +*//****/ |