diff options
Diffstat (limited to 'source/blender/bmesh/intern/bmesh_opdefines.c')
| -rw-r--r-- | source/blender/bmesh/intern/bmesh_opdefines.c | 185 |
1 files changed, 164 insertions, 21 deletions
diff --git a/source/blender/bmesh/intern/bmesh_opdefines.c b/source/blender/bmesh/intern/bmesh_opdefines.c index ef9c510aea1..c054089480f 100644 --- a/source/blender/bmesh/intern/bmesh_opdefines.c +++ b/source/blender/bmesh/intern/bmesh_opdefines.c @@ -59,6 +59,8 @@ #include "bmesh.h" #include "intern/bmesh_operators_private.h" +#include "DNA_modifier_types.h" + /* The formatting of these bmesh operators is parsed by * 'doc/python_api/rst_from_bmesh_opdefines.py' * for use in python docs, so reStructuredText may be used @@ -95,6 +97,32 @@ * note that '//' comments are ignored. */ +/* enums shared between multiple operators */ + +static BMO_FlagSet bmo_enum_axis_xyz[] = { + {0, "X"}, + {1, "Y"}, + {2, "Z"}, + {0, NULL}, +}; + +static BMO_FlagSet bmo_enum_falloff_type[] = { + {SUBD_FALLOFF_SMOOTH, "SMOOTH"}, + {SUBD_FALLOFF_SPHERE, "SPHERE"}, + {SUBD_FALLOFF_ROOT, "ROOT"}, + {SUBD_FALLOFF_SHARP, "SHARP"}, + {SUBD_FALLOFF_LIN, "LINEAR"}, + {SUBD_FALLOFF_INVSQUARE, "INVERSE_SQUARE"}, + {0, NULL}, +}; + +static BMO_FlagSet bmo_enum_compare_types[] = { + {SIM_CMP_EQ, "EQUAL"}, + {SIM_CMP_GT, "GREATER_THAN"}, + {SIM_CMP_LT, "LESS_THAN"}, + {0, NULL}, +}; + /* * Vertex Smooth. * @@ -290,7 +318,7 @@ static BMOpDefine bmo_mirror_def = { {{"geom", BMO_OP_SLOT_ELEMENT_BUF, {BM_VERT | BM_EDGE | BM_FACE}}, /* input geometry */ {"matrix", BMO_OP_SLOT_MAT}, /* matrix defining the mirror transformation */ {"merge_dist", BMO_OP_SLOT_FLT}, /* maximum distance for merging. does no merging if 0. */ - {"axis", BMO_OP_SLOT_INT}, /* the axis to use, 0, 1, or 2 for x, y, z */ + {"axis", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_axis_xyz}, /* the axis to use. */ {"mirror_u", BMO_OP_SLOT_BOOL}, /* mirror UVs across the u axis */ {"mirror_v", BMO_OP_SLOT_BOOL}, /* mirror UVs across the v axis */ {{'\0'}}, @@ -1110,6 +1138,15 @@ static BMOpDefine bmo_dissolve_faces_def = { BMO_OPTYPE_FLAG_SELECT_VALIDATE), }; +static BMO_FlagSet bmo_enum_dissolve_limit_flags[] = { + {BMO_DELIM_NORMAL, "NORMAL"}, + {BMO_DELIM_MATERIAL, "MATERIAL"}, + {BMO_DELIM_SEAM, "SEAM"}, + {BMO_DELIM_SHARP, "SHARP"}, + {BMO_DELIM_UV, "UV"}, + {0, NULL} +}; + /* * Limited Dissolve. * @@ -1122,7 +1159,7 @@ static BMOpDefine bmo_dissolve_limit_def = { {"use_dissolve_boundaries", BMO_OP_SLOT_BOOL}, {"verts", BMO_OP_SLOT_ELEMENT_BUF, {BM_VERT}}, {"edges", BMO_OP_SLOT_ELEMENT_BUF, {BM_EDGE}}, - {"delimit", BMO_OP_SLOT_INT}, + {"delimit", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_FLAG}, bmo_enum_dissolve_limit_flags}, {{'\0'}}, }, /* slots_out */ @@ -1156,6 +1193,20 @@ static BMOpDefine bmo_dissolve_degenerate_def = { BMO_OPTYPE_FLAG_SELECT_VALIDATE), }; +static BMO_FlagSet bmo_enum_triangulate_quad_method[] = { + {MOD_TRIANGULATE_QUAD_BEAUTY, "BEAUTY"}, + {MOD_TRIANGULATE_QUAD_FIXED, "FIXED"}, + {MOD_TRIANGULATE_QUAD_ALTERNATE, "ALTERNATE"}, + {MOD_TRIANGULATE_QUAD_SHORTEDGE, "SHORT_EDGE"}, + {0, NULL}, +}; + +static BMO_FlagSet bmo_enum_triangulate_ngon_method[] = { + {MOD_TRIANGULATE_NGON_BEAUTY, "BEAUTY"}, + {MOD_TRIANGULATE_NGON_EARCLIP, "EAR_CLIP"}, + {0, NULL}, +}; + /* * Triangulate. */ @@ -1163,8 +1214,8 @@ static BMOpDefine bmo_triangulate_def = { "triangulate", /* slots_in */ {{"faces", BMO_OP_SLOT_ELEMENT_BUF, {BM_FACE}}, - {"quad_method", BMO_OP_SLOT_INT}, - {"ngon_method", BMO_OP_SLOT_INT}, + {"quad_method", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_triangulate_quad_method}, + {"ngon_method", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_triangulate_ngon_method}, {{'\0'}}, }, /* slots_out */ @@ -1200,6 +1251,14 @@ static BMOpDefine bmo_unsubdivide_def = { BMO_OPTYPE_FLAG_SELECT_VALIDATE), }; +static BMO_FlagSet bmo_enum_subdivide_edges_quad_corner_type[] = { + {SUBD_CORNER_STRAIGHT_CUT, "STRAIGHT_CUT"}, + {SUBD_CORNER_INNERVERT, "INNER_VERT"}, + {SUBD_CORNER_PATH, "PATH"}, + {SUBD_CORNER_FAN, "FAN"}, + {0, NULL}, +}; + /* * Subdivide Edges. * @@ -1211,15 +1270,14 @@ static BMOpDefine bmo_subdivide_edges_def = { /* slots_in */ {{"edges", BMO_OP_SLOT_ELEMENT_BUF, {BM_EDGE}}, {"smooth", BMO_OP_SLOT_FLT}, - {"smooth_falloff", BMO_OP_SLOT_INT}, /* SUBD_FALLOFF_ROOT and friends */ + {"smooth_falloff", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_falloff_type}, /* smooth falloff type */ {"fractal", BMO_OP_SLOT_FLT}, {"along_normal", BMO_OP_SLOT_FLT}, {"cuts", BMO_OP_SLOT_INT}, {"seed", BMO_OP_SLOT_INT}, {"custom_patterns", BMO_OP_SLOT_MAPPING, {(int)BMO_OP_SLOT_SUBTYPE_MAP_INTERNAL}}, /* uses custom pointers */ {"edge_percents", BMO_OP_SLOT_MAPPING, {(int)BMO_OP_SLOT_SUBTYPE_MAP_FLT}}, - - {"quad_corner_type", BMO_OP_SLOT_INT}, /* quad corner type, see bmesh_operators.h */ + {"quad_corner_type", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_subdivide_edges_quad_corner_type}, /* quad corner type */ {"use_grid_fill", BMO_OP_SLOT_BOOL}, /* fill in fully-selected faces with a grid */ {"use_single_edge", BMO_OP_SLOT_BOOL}, /* tessellate the case of one edge selected in a quad or triangle */ {"use_only_quads", BMO_OP_SLOT_BOOL}, /* only subdivide quads (for loopcut) */ @@ -1241,6 +1299,13 @@ static BMOpDefine bmo_subdivide_edges_def = { BMO_OPTYPE_FLAG_SELECT_VALIDATE), }; +static BMO_FlagSet bmo_enum_subdivide_edgering_interp_mode[] = { + {SUBD_RING_INTERP_LINEAR, "LINEAR"}, + {SUBD_RING_INTERP_PATH, "PATH"}, + {SUBD_RING_INTERP_SURF, "SURFACE"}, + {0, NULL}, +}; + /* * Subdivide Edge-Ring. * @@ -1250,10 +1315,10 @@ static BMOpDefine bmo_subdivide_edgering_def = { "subdivide_edgering", /* slots_in */ {{"edges", BMO_OP_SLOT_ELEMENT_BUF, {BM_EDGE}}, /* input vertices */ - {"interp_mode", BMO_OP_SLOT_INT}, + {"interp_mode", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_subdivide_edgering_interp_mode}, /* interpolation method */ {"smooth", BMO_OP_SLOT_FLT}, {"cuts", BMO_OP_SLOT_INT}, - {"profile_shape", BMO_OP_SLOT_INT}, + {"profile_shape", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_falloff_type}, /* profile shape type */ {"profile_shape_factor", BMO_OP_SLOT_FLT}, {{'\0'}}, }, @@ -1293,6 +1358,17 @@ static BMOpDefine bmo_bisect_plane_def = { BMO_OPTYPE_FLAG_SELECT_VALIDATE), }; +static BMO_FlagSet bmo_enum_delete_context[] = { + {DEL_VERTS, "VERTS"}, + {DEL_EDGES, "EDGES"}, + {DEL_ONLYFACES, "FACES_ONLY"}, + {DEL_EDGESFACES, "EDGES_FACES"}, + {DEL_FACES, "FACES"}, + {DEL_FACES_KEEP_BOUNDARY, "FACES_KEEP_BOUNDARY"}, + {DEL_ONLYTAGGED, "TAGGED_ONLY"}, + {0, NULL}, +}; + /* * Delete Geometry. * @@ -1302,7 +1378,7 @@ static BMOpDefine bmo_delete_def = { "delete", /* slots_in */ {{"geom", BMO_OP_SLOT_ELEMENT_BUF, {BM_VERT | BM_EDGE | BM_FACE}}, - {"context", BMO_OP_SLOT_INT}, /* enum DEL_VERTS ... */ + {"context", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_delete_context}, /* geometry types to delete */ {{'\0'}}, }, {{{'\0'}}}, /* no output */ @@ -1398,6 +1474,20 @@ static BMOpDefine bmo_spin_def = { BMO_OPTYPE_FLAG_SELECT_FLUSH), }; +static BMO_FlagSet bmo_enum_similar_faces_types[] = { + {SIMFACE_MATERIAL, "MATERIAL"}, + {SIMFACE_AREA, "AREA"}, + {SIMFACE_SIDES, "SIDES"}, + {SIMFACE_PERIMETER, "PERIMETER"}, + {SIMFACE_NORMAL, "NORMAL"}, + {SIMFACE_COPLANAR, "COPLANAR"}, + {SIMFACE_SMOOTH, "SMOOTH"}, + {SIMFACE_FACEMAP, "FACE_MAP"}, +#ifdef WITH_FREESTYLE + {SIMFACE_FREESTYLE, "FREESTYLE"}, +#endif + {0, NULL}, +}; /* * Similar Faces Search. @@ -1408,9 +1498,9 @@ static BMOpDefine bmo_similar_faces_def = { "similar_faces", /* slots_in */ {{"faces", BMO_OP_SLOT_ELEMENT_BUF, {BM_FACE}}, /* input faces */ - {"type", BMO_OP_SLOT_INT}, /* type of selection */ + {"type", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_similar_faces_types}, /* type of selection */ {"thresh", BMO_OP_SLOT_FLT}, /* threshold of selection */ - {"compare", BMO_OP_SLOT_INT}, /* comparison method */ + {"compare", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_compare_types}, /* comparison method */ {{'\0'}}, }, /* slots_out */ @@ -1421,6 +1511,21 @@ static BMOpDefine bmo_similar_faces_def = { (BMO_OPTYPE_FLAG_SELECT_FLUSH), }; +static BMO_FlagSet bmo_enum_similar_edges_types[] = { + {SIMEDGE_LENGTH, "LENGTH"}, + {SIMEDGE_DIR, "DIRECTION"}, + {SIMEDGE_FACE, "FACE"}, + {SIMEDGE_FACE_ANGLE, "FACE_ANGLE"}, + {SIMEDGE_CREASE, "CREASE"}, + {SIMEDGE_BEVEL, "BEVEL"}, + {SIMEDGE_SEAM, "SEAM"}, + {SIMEDGE_SHARP, "SHARP"}, +#ifdef WITH_FREESTYLE + {SIMEDGE_FREESTYLE, "FREESTYLE"}, +#endif + {0, NULL}, +}; + /* * Similar Edges Search. * @@ -1430,9 +1535,9 @@ static BMOpDefine bmo_similar_edges_def = { "similar_edges", /* slots_in */ {{"edges", BMO_OP_SLOT_ELEMENT_BUF, {BM_EDGE}}, /* input edges */ - {"type", BMO_OP_SLOT_INT}, /* type of selection */ + {"type", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_similar_edges_types}, /* type of selection */ {"thresh", BMO_OP_SLOT_FLT}, /* threshold of selection */ - {"compare", BMO_OP_SLOT_INT}, /* comparison method */ + {"compare", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_compare_types}, /* comparison method */ {{'\0'}}, }, /* slots_out */ @@ -1443,6 +1548,14 @@ static BMOpDefine bmo_similar_edges_def = { (BMO_OPTYPE_FLAG_SELECT_FLUSH), }; +static BMO_FlagSet bmo_enum_similar_verts_types[] = { + {SIMVERT_NORMAL, "NORMAL"}, + {SIMVERT_FACE, "FACE"}, + {SIMVERT_VGROUP, "VERTEX_GROUP"}, + {SIMVERT_EDGE, "EDGE"}, + {0, NULL}, +}; + /* * Similar Verts Search. * @@ -1452,9 +1565,9 @@ static BMOpDefine bmo_similar_verts_def = { "similar_verts", /* slots_in */ {{"verts", BMO_OP_SLOT_ELEMENT_BUF, {BM_VERT}}, /* input vertices */ - {"type", BMO_OP_SLOT_INT}, /* type of selection */ + {"type", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_similar_verts_types}, /* type of selection */ {"thresh", BMO_OP_SLOT_FLT}, /* threshold of selection */ - {"compare", BMO_OP_SLOT_INT}, /* comparison method */ + {"compare", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_compare_types}, /* comparison method */ {{'\0'}}, }, /* slots_out */ @@ -1719,6 +1832,22 @@ static BMOpDefine bmo_create_cube_def = { BMO_OPTYPE_FLAG_SELECT_FLUSH), }; +static BMO_FlagSet bmo_enum_bevel_offset_type[] = { + {BEVEL_AMT_OFFSET, "OFFSET"}, + {BEVEL_AMT_WIDTH, "WIDTH"}, + {BEVEL_AMT_DEPTH, "DEPTH"}, + {BEVEL_AMT_PERCENT, "PERCENT"}, + {0, NULL}, +}; + +static BMO_FlagSet bmo_enum_bevel_harden_normal_type[] = { + {BEVEL_HN_NONE, "NONE"}, + {BEVEL_HN_FACE, "FACE"}, + {BEVEL_HN_ADJ, "ADJACENT"}, + {BEVEL_HN_FIX_SHA, "FIXED_NORMAL_SHADING"}, + {0, NULL}, +}; + /* * Bevel. * @@ -1729,7 +1858,7 @@ static BMOpDefine bmo_bevel_def = { /* slots_in */ {{"geom", BMO_OP_SLOT_ELEMENT_BUF, {BM_VERT | BM_EDGE | BM_FACE}}, /* input edges and vertices */ {"offset", BMO_OP_SLOT_FLT}, /* amount to offset beveled edge */ - {"offset_type", BMO_OP_SLOT_INT}, /* how to measure offset (enum) */ + {"offset_type", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_bevel_offset_type}, /* how to measure the offset */ {"segments", BMO_OP_SLOT_INT}, /* number of segments in bevel */ {"profile", BMO_OP_SLOT_FLT}, /* profile shape, 0->1 (.5=>round) */ {"vertex_only", BMO_OP_SLOT_BOOL}, /* only bevel vertices, not edges */ @@ -1739,7 +1868,7 @@ static BMOpDefine bmo_bevel_def = { {"mark_seam", BMO_OP_SLOT_BOOL}, /* extend edge data to allow seams to run across bevels */ {"mark_sharp", BMO_OP_SLOT_BOOL}, /* extend edge data to allow sharp edges to run across bevels */ {"strength", BMO_OP_SLOT_FLT}, /* strength of calculated normal in range (0, 1) for custom clnors */ - {"hnmode", BMO_OP_SLOT_INT}, /* harden normals mode used in bevel if enabled */ + {"hnmode", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_bevel_harden_normal_type}, /* harden normals mode used in bevel, if enabled */ {{'\0'}}, }, /* slots_out */ @@ -1757,6 +1886,13 @@ static BMOpDefine bmo_bevel_def = { BMO_OPTYPE_FLAG_SELECT_VALIDATE), }; +/* no enum is defined for this */ +static BMO_FlagSet bmo_enum_beautify_fill_method[] = { + {0, "AREA"}, + {1, "ANGLE"}, + {0, NULL}, +}; + /* * Beautify Fill. * @@ -1768,7 +1904,7 @@ static BMOpDefine bmo_beautify_fill_def = { {{"faces", BMO_OP_SLOT_ELEMENT_BUF, {BM_FACE}}, /* input faces */ {"edges", BMO_OP_SLOT_ELEMENT_BUF, {BM_EDGE}}, /* edges that can be flipped */ {"use_restrict_tag", BMO_OP_SLOT_BOOL}, /* restrict edge rotation to mixed tagged vertices */ - {"method", BMO_OP_SLOT_INT}, /* method to define what is beautiful */ + {"method", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_beautify_fill_method}, /* method to define what is beautiful */ {{'\0'}}, }, /* slots_out */ @@ -1932,6 +2068,13 @@ static BMOpDefine bmo_wireframe_def = { BMO_OPTYPE_FLAG_SELECT_VALIDATE), }; +static BMO_FlagSet bmo_enum_poke_center_mode[] = { + {BMOP_POKE_MEAN_WEIGHTED, "MEAN_WEIGHTED"}, + {BMOP_POKE_MEAN, "MEAN"}, + {BMOP_POKE_BOUNDS, "BOUNDS"}, + {0, NULL}, +}; + /* * Pokes a face. * @@ -1942,7 +2085,7 @@ static BMOpDefine bmo_poke_def = { /* slots_in */ {{"faces", BMO_OP_SLOT_ELEMENT_BUF, {BM_FACE}}, /* input faces */ {"offset", BMO_OP_SLOT_FLT}, /* center vertex offset along normal */ - {"center_mode", BMO_OP_SLOT_INT}, /* calculation mode for center vertex */ + {"center_mode", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_poke_center_mode}, /* calculation mode for center vertex */ {"use_relative_offset", BMO_OP_SLOT_BOOL}, /* apply offset */ {{'\0'}}, }, @@ -2008,7 +2151,7 @@ static BMOpDefine bmo_symmetrize_def = { "symmetrize", /* slots_in */ {{"input", BMO_OP_SLOT_ELEMENT_BUF, {BM_VERT | BM_EDGE | BM_FACE}}, - {"direction", BMO_OP_SLOT_INT}, + {"direction", BMO_OP_SLOT_INT, {(int)BMO_OP_SLOT_SUBTYPE_INT_ENUM}, bmo_enum_axis_xyz}, /* axis to use */ {"dist", BMO_OP_SLOT_FLT}, /* minimum distance */ {{'\0'}}, }, |