diff options
Diffstat (limited to 'source/blender/makesrna/rna_cleanup/rna_booleans.txt')
| -rw-r--r-- | source/blender/makesrna/rna_cleanup/rna_booleans.txt | 1371 |
1 files changed, 1371 insertions, 0 deletions
diff --git a/source/blender/makesrna/rna_cleanup/rna_booleans.txt b/source/blender/makesrna/rna_cleanup/rna_booleans.txt new file mode 100644 index 00000000000..614db736d64 --- /dev/null +++ b/source/blender/makesrna/rna_cleanup/rna_booleans.txt @@ -0,0 +1,1371 @@ +ActionActuator.continue_last_frame -> use_continue_last_frame: boolean Restore last frame when switching on/off, otherwise play from the start each time +ActionGroup.expanded -> show_expanded: boolean Action Group is expanded +ActionGroup.locked -> lock: boolean Action Group is locked +ActionGroup.selected -> select: boolean Action Group is selected +Actuator.expanded -> show_expanded: boolean Set actuator expanded in the user interface +AnimData.nla_enabled -> use_nla: boolean NLA stack is evaluated when evaluating this block +AnimVizMotionPaths.highlight_keyframes -> show_keyframe_highlight: boolean Emphasize position of keyframes on Motion Paths +AnimVizMotionPaths.search_all_action_keyframes -> show_keyframe_action_all: boolean For bone motion paths, search whole Action for keyframes instead of in group with matching name only (is slower) +AnimVizMotionPaths.show_frame_numbers -> show_frame_numbers: boolean Show frame numbers on Motion Paths +AnimVizMotionPaths.show_keyframe_numbers -> show_keyframe_numbers: boolean Show frame numbers of Keyframes on Motion Paths +AnimVizOnionSkinning.only_selected -> show_only_selected: boolean For Pose-Mode drawing, only draw ghosts for selected bones +Area.show_menus -> show_menus: boolean Show menus in the header +AreaLamp.dither -> use_dither: boolean Use 2x2 dithering for sampling (Constant Jittered sampling) +AreaLamp.jitter -> use_jitter: boolean Use noise for sampling (Constant Jittered sampling) +AreaLamp.only_shadow -> use_only_shadow: boolean Causes light to cast shadows only without illuminating objects +AreaLamp.shadow_layer -> use_shadow_layer: boolean Causes only objects on the same layer to cast shadows +AreaLamp.umbra -> use_umbra: boolean Emphasize parts that are fully shadowed (Constant Jittered sampling) +Armature.auto_ik -> use_auto_ik: boolean Add temporaral IK constraints while grabbing bones in Pose Mode +Armature.deform_envelope -> use_deform_envelopes: boolean Enable Bone Envelopes when defining deform +Armature.deform_quaternion -> use_deform_preserve_volume: boolean Deform rotation interpolation with quaternions +Armature.deform_vertexgroups -> use_deform_vertex_groups: boolean Enable Vertex Groups when defining deform +Armature.delay_deform -> use_deform_delay: boolean Don't deform children when manipulating bones in Pose Mode +Armature.draw_axes -> show_axes: boolean Draw bone axes +Armature.draw_custom_bone_shapes -> show_bone_custom_shapes: boolean Draw bones with their custom shapes +Armature.draw_group_colors -> show_group_colors: boolean Draw bone group colors +Armature.draw_names -> show_names: boolean Draw bone names +Armature.show_ghost_only_selected -> show_only_ghost_selected: boolean +Armature.layer -> layer: boolean Armature layer visibility +Armature.layer_protection -> layer_protected: boolean Protected layers in Proxy Instances are restored to Proxy settings on file reload and undo +Armature.x_axis_mirror -> use_mirror_x: boolean Apply changes to matching bone on opposite side of X-Axis +ArmatureModifier.invert -> invert_vertex_group: boolean Invert vertex group influence +ArmatureModifier.multi_modifier -> use_multi_modifier: boolean Use same input as previous modifier, and mix results using overall vgroup +ArmatureModifier.quaternion -> use_deform_preserve_volume: boolean Deform rotation interpolation with quaternions +ArmatureModifier.use_deform_envelopes -> use_deform_envelopes: boolean +ArmatureModifier.use_deform_vertex_groups -> use_deform_vertex_groups: boolean +ArrayModifier.add_offset_object -> use_object_offset: boolean Add another object's transformation to the total offset +ArrayModifier.constant_offset -> use_constant_offset: boolean Add a constant offset +ArrayModifier.merge_adjacent_vertices -> use_merge_adjacent_vertices: boolean Merge vertices in adjacent duplicates +ArrayModifier.merge_end_vertices -> use_merge_end_vertices: boolean Merge vertices in first and last duplicates +ArrayModifier.relative_offset -> use_relative_offset: boolean Add an offset relative to the object's bounding box +BackgroundImage.show_expanded -> show_expanded: boolean Show the expanded in the user interface +BevelModifier.only_vertices -> use_only_vertices: boolean Bevel verts/corners, not edges +BezierSplinePoint.hidden -> hide: boolean Visibility status +BezierSplinePoint.selected_control_point -> select_control_point: boolean Control point selection status +BezierSplinePoint.selected_handle1 -> select_left_handle: boolean Handle 1 selection status +BezierSplinePoint.selected_handle2 -> select_right_handle: boolean Handle 2 selection status +BoidRule.in_air -> use_in_air: boolean Use rule when boid is flying +BoidRule.on_land -> use_on_land: boolean Use rule when boid is on land +BoidRuleAvoid.predict -> use_predict: boolean Predict target movement +BoidRuleAvoidCollision.boids -> use_avoid: boolean Avoid collision with other boids +BoidRuleAvoidCollision.deflectors -> use_avoid_collision: boolean Avoid collision with deflector objects +BoidRuleFollowLeader.line -> use_line: boolean Follow leader in a line +BoidRuleGoal.predict -> use_predict: boolean Predict target movement +BoidSettings.allow_climb -> use_climb: boolean Allow boids to climb goal objects +BoidSettings.allow_flight -> use_flight: boolean Allow boids to move in air +BoidSettings.allow_land -> use_land: boolean Allow boids to move on land +Bone.connected -> use_connect: boolean, (read-only) When bone has a parent, bone's head is struck to the parent's tail +Bone.cyclic_offset -> use_cyclic_offset: boolean When bone doesn't have a parent, it receives cyclic offset effects +Bone.deform -> use_deform: boolean Bone does not deform any geometry +Bone.draw_wire -> show_wire: boolean Bone is always drawn as Wireframe regardless of viewport draw mode. Useful for non-obstructive custom bone shapes +Bone.hidden -> hide: boolean Bone is not visible when it is not in Edit Mode (i.e. in Object or Pose Modes) +Bone.hinge -> use_hinge: boolean Bone inherits rotation or scale from parent bone +Bone.inherit_scale -> use_inherit_scale: boolean Bone inherits scaling from parent bone +Bone.layer -> layer: boolean Layers bone exists in +Bone.local_location -> use_local_location: boolean Bone location is set in local space +Bone.multiply_vertexgroup_with_envelope -> use_envelope_multiply: boolean When deforming bone, multiply effects of Vertex Group weights with Envelope influence +Bone.restrict_select -> restrict_select: boolean Bone is able to be selected +Bone.selected -> select: boolean +BooleanProperty.default -> default: boolean, (read-only) Default value for this number +BooleanProperty.default_array -> default_array: boolean, (read-only) Default value for this array +Brush.use_accumulate -> use_accumulate: boolean Accumulate stroke dabs on top of each other +Brush.use_airbrush -> use_airbrush: boolean Keep applying paint effect while holding mouse (spray) +Brush.use_alpha -> use_alpha: boolean When this is disabled, lock alpha while painting +Brush.use_anchor -> use_anchor: boolean Keep the brush anchored to the initial location +Brush.use_jitter_pressure -> use_pressure_jitter: boolean Enable tablet pressure sensitivity for jitter +Brush.use_persistent -> use_persistent: boolean Sculpts on a persistent layer of the mesh +Brush.use_rake -> use_rake: boolean Rotate the brush texture to match the stroke direction +Brush.use_size_pressure -> use_pressure_size: boolean Enable tablet pressure sensitivity for size +Brush.use_smooth_stroke -> use_smooth_stroke: boolean Brush lags behind mouse and follows a smoother path +Brush.use_space -> use_space: boolean Limit brush application to the distance specified by spacing +Brush.use_spacing_pressure -> use_pressure_spacing: boolean Enable tablet pressure sensitivity for spacing +Brush.use_strength_pressure -> use_pressure_strength: boolean Enable tablet pressure sensitivity for strength +Brush.use_wrap -> use_wrap: boolean Enable torus wrapping while painting +BuildModifier.randomize -> use_random_order: boolean Randomize the faces or edges during build +Camera.panorama -> use_panorama: boolean Render the scene with a cylindrical camera for pseudo-fisheye lens effects +Camera.show_limits -> show_limits: boolean Draw the clipping range and focus point on the camera +Camera.show_mist -> show_mist: boolean Draw a line from the Camera to indicate the mist area +Camera.show_name -> show_name: boolean Show the active Camera's name in Camera view +Camera.show_passepartout -> show_passepartout: boolean Show a darkened overlay outside the image area in Camera view +Camera.show_title_safe -> show_title_safe: boolean Show indicators for the title safe zone in Camera view +CastModifier.from_radius -> use_radius_as_size: boolean Use radius as size of projection shape (0 = auto) +CastModifier.use_transform -> use_transform: boolean Use object transform to control projection shape +CastModifier.x -> use_x: boolean +CastModifier.y -> use_y: boolean +CastModifier.z -> use_z: boolean +ChildOfConstraint.use_location_x -> use_location_x: boolean Use X Location of Parent +ChildOfConstraint.use_location_y -> use_location_y: boolean Use Y Location of Parent +ChildOfConstraint.use_location_z -> use_location_z: boolean Use Z Location of Parent +ChildOfConstraint.use_rotation_x -> use_rotation_x: boolean Use X Rotation of Parent +ChildOfConstraint.use_rotation_y -> use_rotation_y: boolean Use Y Rotation of Parent +ChildOfConstraint.use_rotation_z -> use_rotation_z: boolean Use Z Rotation of Parent +ChildOfConstraint.use_scale_x -> use_scale_x: boolean Use X Scale of Parent +ChildOfConstraint.use_scale_y -> use_scale_y: boolean Use Y Scale of Parent +ChildOfConstraint.use_scale_z -> use_scale_z: boolean Use Z Scale of Parent +ClampToConstraint.cyclic -> use_cyclic: boolean Treat curve as cyclic curve (no clamping to curve bounding box +ClothCollisionSettings.enable_collision -> use_collision: boolean Enable collisions with other objects +ClothCollisionSettings.enable_self_collision -> use_self_collision: boolean Enable self collisions +ClothSettings.pin_cloth -> use_pin_cloth: boolean Enable pinning of cloth vertices to other objects/positions +ClothSettings.stiffness_scaling -> use_stiffness_scale: boolean If enabled, stiffness can be scaled along a weight painted vertex group +CollisionSensor.collision_type -> use_material: boolean Use material instead of property +CollisionSensor.pulse -> use_pulse: boolean Changes to the set of colliding objects generates pulse +CollisionSettings.enabled -> use: boolean Enable this objects as a collider for physics systems +CollisionSettings.kill_particles -> use_particle_kill: boolean Kill colliding particles +CompositorNodeAlphaOver.convert_premul -> use_premultiply: boolean +CompositorNodeBlur.bokeh -> use_bokeh: boolean +CompositorNodeBlur.gamma -> use_gamma_correction: boolean +CompositorNodeBlur.relative -> use_relative: boolean +CompositorNodeColorSpill.unspill -> use_unspill: boolean Compensate all channels (diffenrently) by hand +CompositorNodeCrop.crop_size -> use_crop_size: boolean Whether to crop the size of the input image +CompositorNodeDBlur.wrap -> use_wrap: boolean +CompositorNodeDefocus.gamma_correction -> use_gamma_correction: boolean Enable gamma correction before and after main process +CompositorNodeDefocus.preview -> use_preview: boolean Enable sampling mode, useful for preview when using low samplecounts +CompositorNodeDefocus.use_zbuffer -> use_zbuffer: boolean Disable when using an image as input instead of actual zbuffer (auto enabled if node not image based, eg. time node) +CompositorNodeGlare.rotate_45 -> use_rotate_45: boolean Simple star filter: add 45 degree rotation offset +CompositorNodeImage.auto_refresh -> use_auto_refresh: boolean +CompositorNodeImage.cyclic -> use_cyclic: boolean +CompositorNodeInvert.alpha -> invert_alpha: boolean +CompositorNodeInvert.rgb -> invert_rgb: boolean +CompositorNodeLensdist.fit -> use_fit: boolean For positive distortion factor only: scale image such that black areas are not visible +CompositorNodeLensdist.jitter -> use_jitter: boolean Enable/disable jittering; faster, but also noisier +CompositorNodeLensdist.projector -> use_projector: boolean Enable/disable projector mode. Effect is applied in horizontal direction only +CompositorNodeMapValue.use_max -> use_max: boolean +CompositorNodeMapValue.use_min -> use_min: boolean +CompositorNodeMixRGB.alpha -> use_alpha: boolean Include alpha of second input in this operation +CompositorNodeOutputFile.exr_half -> use_exr_half: boolean +CompositorNodeVecBlur.curved -> use_curved: boolean Interpolate between frames in a bezier curve, rather than linearly +Constraint.active -> active: boolean Constraint is the one being edited +Constraint.disabled -> is_valid: boolean, (read-only) Constraint has invalid settings and will not be evaluated +Constraint.expanded -> show_expanded: boolean Constraint's panel is expanded in UI +Constraint.proxy_local -> is_proxy_local: boolean Constraint was added in this proxy instance (i.e. did not belong to source Armature) +ConstraintActuator.detect_material -> use_material_detect: boolean Detect material instead of property +ConstraintActuator.fh_normal -> use_fh_normal: boolean Add a horizontal spring force on slopes +ConstraintActuator.fh_paralel_axis -> use_fh_paralel_axis: boolean Keep object axis parallel to normal +ConstraintActuator.force_distance -> use_force_distance: boolean Force distance of object to point of impact of ray +ConstraintActuator.local -> use_local: boolean Set ray along object's axis or global axis +ConstraintActuator.normal -> use_normal: boolean Set object axis along (local axis) or parallel (global axis) to the normal at hit position +ConstraintActuator.persistent -> use_persistent: boolean Persistent actuator: stays active even if ray does not reach target +ControlFluidSettings.active -> use: boolean Object contributes to the fluid simulation +ControlFluidSettings.reverse_frames -> use_reverse_frames: boolean Reverse control object movement +Controller.expanded -> show_expanded: boolean Set controller expanded in the user interface +Controller.priority -> use_priority: boolean Mark controller for execution before all non-marked controllers (good for startup scripts) +Controller.state -> state: boolean, (read-only) Set Controller state index (1 to 30) +CopyLocationConstraint.invert_x -> invert_x: boolean Invert the X location +CopyLocationConstraint.invert_y -> invert_y: boolean Invert the Y location +CopyLocationConstraint.invert_z -> invert_z: boolean Invert the Z location +CopyLocationConstraint.use_offset -> use_offset: boolean Add original location into copied location +CopyLocationConstraint.use_x -> use_x: boolean Copy the target's X location +CopyLocationConstraint.use_y -> use_y: boolean Copy the target's Y location +CopyLocationConstraint.use_z -> use_z: boolean Copy the target's Z location +CopyRotationConstraint.invert_x -> invert_x: boolean Invert the X rotation +CopyRotationConstraint.invert_y -> invert_y: boolean Invert the Y rotation +CopyRotationConstraint.invert_z -> invert_z: boolean Invert the Z rotation +CopyRotationConstraint.use_offset -> use_offset: boolean Add original rotation into copied rotation +CopyRotationConstraint.use_x -> use_x: boolean Copy the target's X rotation +CopyRotationConstraint.use_y -> use_y: boolean Copy the target's Y rotation +CopyRotationConstraint.use_z -> use_z: boolean Copy the target's Z rotation +CopyScaleConstraint.use_offset -> use_offset: boolean Add original scale into copied scale +CopyScaleConstraint.use_x -> use_x: boolean Copy the target's X scale +CopyScaleConstraint.use_y -> use_y: boolean Copy the target's Y scale +CopyScaleConstraint.use_z -> use_z: boolean Copy the target's Z scale +Curve.auto_texspace -> use_auto_texspace: boolean Adjusts active object's texture space automatically when transforming object +Curve.back -> use_fill_back: boolean Draw filled back for extruded/beveled curves +Curve.draw_handles -> show_handles: boolean Display bezier handles in editmode +Curve.draw_normals -> show_normals: boolean Display 3D curve normals in editmode +Curve.front -> use_fill_front: boolean Draw filled front for extruded/beveled curves +Curve.map_along_length -> use_map_along_length: boolean Generate texture mapping coordinates following the curve direction, rather than the local bounding box +Curve.use_deform_fill -> use_fill_deform: boolean Fill curve after applying deformation +Curve.use_path -> use_path: boolean Enable the curve to become a translation path +Curve.use_path_follow -> use_path_follow: boolean Make curve path children to rotate along the path +Curve.use_radius -> use_radius: boolean Option for paths: apply the curve radius with path following it and deforming +Curve.use_stretch -> use_stretch: boolean Option for curve-deform: makes deformed child to stretch along entire path +Curve.use_time_offset -> use_time_offset: boolean Children will use Time Offset value as path distance offset +CurveMapPoint.selected -> select: boolean Selection state of the curve point +CurveMapping.clip -> use_clip: boolean Force the curve view to fit a defined boundary +DelaySensor.repeat -> use_repeat: boolean Toggle repeat option. If selected, the sensor restarts after Delay+Dur logic tics +DomainFluidSettings.generate_speed_vectors -> use_speed_vectors: boolean Generate speed vectors for vector blur +DomainFluidSettings.override_time -> use_time_override: boolean Use a custom start and end time (in seconds) instead of the scene's timeline +DomainFluidSettings.reverse_frames -> use_reverse_frames: boolean Reverse fluid frames +NEGATE * DopeSheet.collapse_summary -> show_expanded_summary: boolean Collapse summary when shown, so all other channels get hidden. (DopeSheet Editors Only) +DopeSheet.display_armature -> show_armatures: boolean Include visualization of Armature related Animation data +DopeSheet.display_camera -> show_cameras: boolean Include visualization of Camera related Animation data +DopeSheet.display_curve -> show_curves: boolean Include visualization of Curve related Animation data +DopeSheet.display_lamp -> show_lamps: boolean Include visualization of Lamp related Animation data +DopeSheet.display_material -> show_materials: boolean Include visualization of Material related Animation data +DopeSheet.display_mesh -> show_meshes: boolean Include visualization of Mesh related Animation data +DopeSheet.display_metaball -> show_metaballs: boolean Include visualization of Metaball related Animation data +DopeSheet.display_node -> show_nodes: boolean Include visualization of Node related Animation data +DopeSheet.display_particle -> show_particles: boolean Include visualization of Particle related Animation data +DopeSheet.display_scene -> show_scenes: boolean Include visualization of Scene related Animation data +DopeSheet.display_shapekeys -> show_shapekeys: boolean Include visualization of ShapeKey related Animation data +DopeSheet.display_summary -> show_summary: boolean Display an additional 'summary' line. (DopeSheet Editors only) +DopeSheet.display_texture -> show_textures: boolean Include visualization of Texture related Animation data +DopeSheet.display_transforms -> show_transforms: boolean Include visualization of Object-level Animation data (mostly Transforms) +DopeSheet.display_world -> show_worlds: boolean Include visualization of World related Animation data +DopeSheet.include_missing_nla -> show_missing_nla: boolean Include Animation Data blocks with no NLA data. (NLA Editor only) +DopeSheet.only_group_objects -> show_only_group_objects: boolean Only include channels from Objects in the specified Group +DopeSheet.only_selected -> show_only_selected: boolean Only include channels relating to selected objects and data +Driver.invalid -> is_valid: boolean Driver could not be evaluated in past, so should be skipped +Driver.show_debug_info -> show_debug_info: boolean Show intermediate values for the driver calculations to allow debugging of drivers +DriverTarget.use_local_space_transforms -> use_local_space_transform: boolean Use transforms in Local Space (as opposed to the worldspace default) +EdgeSplitModifier.use_edge_angle -> use_edge_angle: boolean Split edges with high angle between faces +EdgeSplitModifier.use_sharp -> use_edge_sharp: boolean Split edges that are marked as sharp +EditBone.connected -> use_connect: boolean When bone has a parent, bone's head is struck to the parent's tail +EditBone.cyclic_offset -> use_cyclic_offset: boolean When bone doesn't have a parent, it receives cyclic offset effects +EditBone.deform -> use_deform: boolean Bone does not deform any geometry +EditBone.draw_wire -> show_wire: boolean Bone is always drawn as Wireframe regardless of viewport draw mode. Useful for non-obstructive custom bone shapes +EditBone.hidden -> hide: boolean Bone is not visible when in Edit Mode +EditBone.hinge -> use_hinge: boolean Bone inherits rotation or scale from parent bone +EditBone.inherit_scale -> use_inherit_scale: boolean Bone inherits scaling from parent bone +EditBone.layer -> layer: boolean Layers bone exists in +EditBone.local_location -> use_local_location: boolean Bone location is set in local space +EditBone.locked -> lock: boolean Bone is not able to be transformed when in Edit Mode +EditBone.multiply_vertexgroup_with_envelope -> use_envelope_multiply: boolean When deforming bone, multiply effects of Vertex Group weights with Envelope influence +EditBone.restrict_select -> restrict_select: boolean Bone is able to be selected +EditBone.selected -> select: boolean +EditBone.selected_head -> select_head: boolean +EditBone.selected_tail -> select_tail: boolean +EditObjectActuator.enable_3d_tracking -> use_3d_tracking: boolean Enable 3D tracking +EditObjectActuator.local_angular_velocity -> use_local_angular_velocity: boolean Apply the rotation locally +EditObjectActuator.local_linear_velocity -> use_local_linear_velocity: boolean Apply the transformation locally +EditObjectActuator.replace_display_mesh -> use_replace_display_mesh: boolean Replace the display mesh +EditObjectActuator.replace_physics_mesh -> use_replace_physics_mesh: boolean Replace the physics mesh (triangle bounds only - compound shapes not supported) +EffectSequence.convert_float -> use_float: boolean Convert input to float data +EffectSequence.de_interlace -> use_deinterlace: boolean For video movies to remove fields +EffectSequence.flip_x -> use_flip_x: boolean Flip on the X axis +EffectSequence.flip_y -> use_flip_y: boolean Flip on the Y axis +EffectSequence.premultiply -> use_premultiply: boolean Convert RGB from key alpha to premultiplied alpha +EffectSequence.proxy_custom_directory -> use_proxy_custom_directory: boolean Use a custom directory to store data +EffectSequence.proxy_custom_file -> use_proxy_custom_file: boolean Use a custom file to read proxy data from +EffectSequence.reverse_frames -> use_reverse_frames: boolean Reverse frame order +EffectSequence.use_color_balance -> use_color_balance: boolean (3-Way color correction) on input +EffectSequence.use_crop -> use_crop: boolean Crop image before processing +EffectSequence.use_proxy -> use_proxy: boolean Use a preview proxy for this strip +EffectSequence.use_translation -> use_translation: boolean Translate image before processing +EffectorWeights.do_growing_hair -> apply_to_hair_growing: boolean Use force fields when growing hair +EnvironmentMap.ignore_layers -> layer_ignore: boolean Hide objects on these layers when generating the Environment Map +EnvironmentMapTexture.use_filter_size_min -> filter_size_min: boolean Use Filter Size as a minimal filter value in pixels +EnvironmentMapTexture.mipmap -> use_mipmap: boolean Uses auto-generated MIP maps for the image +EnvironmentMapTexture.mipmap_gauss -> use_mipmap_gauss: boolean Uses Gauss filter to sample down MIP maps +Event.alt -> alt: boolean, (read-only) True when the Alt/Option key is held +Event.ctrl -> ctrl: boolean, (read-only) True when the Ctrl key is held +Event.oskey -> oskey: boolean, (read-only) True when the Cmd key is held +Event.shift -> shift: boolean, (read-only) True when the Shift key is held +ExplodeModifier.alive -> show_alive: boolean Show mesh when particles are alive +ExplodeModifier.dead -> show_dead: boolean Show mesh when particles are dead +ExplodeModifier.size -> use_size: boolean Use particle size for the shrapnel +ExplodeModifier.split_edges -> use_edge_split: boolean Split face edges for nicer shrapnel +ExplodeModifier.unborn -> show_unborn: boolean Show mesh when particles are unborn +FCurve.auto_clamped_handles -> use_auto_handle_clamp: boolean All auto-handles for F-Curve are clamped +NEGATE * FCurve.disabled -> enabled: boolean F-Curve could not be evaluated in past, so should be skipped when evaluating +FCurve.locked -> lock: boolean F-Curve's settings cannot be edited +FCurve.muted -> mute: boolean F-Curve is not evaluated +FCurve.selected -> select: boolean F-Curve is selected for editing +NEGATE * FCurve.visible -> hide: boolean F-Curve and its keyframes are shown in the Graph Editor graphs +FCurveSample.selected -> select: boolean Selection status +FModifier.active -> active: boolean F-Curve Modifier is the one being edited +NEGATE * FModifier.disabled -> enabled: boolean, (read-only) F-Curve Modifier has invalid settings and will not be evaluated +FModifier.expanded -> show_expanded: boolean F-Curve Modifier's panel is expanded in UI +FModifier.muted -> mute: boolean F-Curve Modifier will not be evaluated +FModifierFunctionGenerator.additive -> use_additive: boolean Values generated by this modifier are applied on top of the existing values instead of overwriting them +FModifierGenerator.additive -> use_additive: boolean Values generated by this modifier are applied on top of the existing values instead of overwriting them +FModifierLimits.use_maximum_x -> use_max_x: boolean Use the maximum X value +FModifierLimits.use_maximum_y -> use_max_y: boolean Use the maximum Y value +FModifierLimits.use_minimum_x -> use_min_x: boolean Use the minimum X value +FModifierLimits.use_minimum_y -> use_min_y: boolean Use the minimum Y value +FModifierStepped.use_frame_end -> use_frame_end: boolean Restrict modifier to only act before its 'end' frame +FModifierStepped.use_frame_start -> use_frame_start: boolean Restrict modifier to only act after its 'start' frame +FcurveActuator.add -> use_add: boolean F-Curve is added to the current loc/rot/scale in global or local coordinate according to Local flag +FcurveActuator.child -> apply_to_children: boolean Update F-Curve on all children Objects as well +FcurveActuator.force -> use_force: boolean Apply F-Curve as a global or local force depending on the local option (dynamic objects only) +FcurveActuator.local -> use_local: boolean Let the F-Curve act in local coordinates, used in Force and Add mode +FieldSettings.do_absorption -> use_absorption: boolean Force gets absorbed by collision objects +FieldSettings.do_location -> apply_to_location: boolean Effect particles' location +FieldSettings.do_rotation -> apply_to_rotation: boolean Effect particles' dynamic rotation +FieldSettings.force_2d -> use_2d_force: boolean Apply force only in 2d +FieldSettings.global_coordinates -> use_global_coordinates: boolean Use effector/global coordinates for turbulence +FieldSettings.guide_path_add -> use_guide_path_add: boolean Based on distance/falloff it adds a portion of the entire path +FieldSettings.multiple_springs -> use_multiple_springs: boolean Every point is effected by multiple springs +FieldSettings.root_coordinates -> use_root_coordinates: boolean Texture coordinates from root particle locations +FieldSettings.use_coordinates -> use_object_coordinates: boolean Use object/global coordinates for texture +FieldSettings.use_guide_path_weight -> use_guide_path_weight: boolean Use curve weights to influence the particle influence along the curve +FieldSettings.use_max_distance -> use_max_distance: boolean Use a maximum distance for the field to work +FieldSettings.use_min_distance -> use_min_distance: boolean Use a minimum distance for the field's fall-off +FieldSettings.use_radial_max -> use_radial_max: boolean Use a maximum radial distance for the field to work +FieldSettings.use_radial_min -> use_radial_min: boolean Use a minimum radial distance for the field's fall-off +FileSelectParams.do_filter -> use_filter: boolean Enable filtering of files +FileSelectParams.filter_blender -> use_filter_blender: boolean Show .blend files +FileSelectParams.filter_folder -> use_filter_folder: boolean Show folders +FileSelectParams.filter_font -> use_filter_font: boolean Show font files +FileSelectParams.filter_image -> use_filter_image: boolean Show image files +FileSelectParams.filter_movie -> use_filter_movie: boolean Show movie files +FileSelectParams.filter_script -> use_filter_script: boolean Show script files +FileSelectParams.filter_sound -> use_filter_sound: boolean Show sound files +FileSelectParams.filter_text -> use_filter_text: boolean Show text files +NEGATE * FileSelectParams.hide_dot -> show_hidden: boolean Hide hidden dot files +Filter2DActuator.enable_motion_blur -> use_motion_blur: boolean Enable/Disable Motion Blur +FloorConstraint.sticky -> use_sticky: boolean Immobilize object while constrained +FloorConstraint.use_rotation -> use_rotation: boolean Use the target's rotation to determine floor +FluidFluidSettings.active -> use: boolean Object contributes to the fluid simulation +FluidFluidSettings.export_animated_mesh -> use_animated_mesh: boolean Export this mesh as an animated one. Slower, only use if really necessary (e.g. armatures or parented objects), animated pos/rot/scale IPOs do not require it +FollowPathConstraint.use_curve_follow -> use_curve_follow: boolean Object will follow the heading and banking of the curve +FollowPathConstraint.use_curve_radius -> use_curve_radius: boolean Objects scale by the curve radius +FollowPathConstraint.use_fixed_position -> use_fixed_location: boolean Object will stay locked to a single point somewhere along the length of the curve regardless of time +Function.registered -> is_registered: boolean, (read-only) Function is registered as callback as part of type registration +Function.registered_optional -> is_registered_optional: boolean, (read-only) Function is optionally registered as callback part of type registration +GPencilFrame.paint_lock -> is_edited: boolean Frame is being edited (painted on) +GPencilFrame.selected -> select: boolean Frame is selected for editing in the DopeSheet +GPencilLayer.active -> active: boolean Set active layer for editing +GPencilLayer.frame_lock -> lock_frame: boolean Lock current frame displayed by layer +GPencilLayer.hide -> hide: boolean Set layer Visibility +GPencilLayer.locked -> lock: boolean Protect layer from further editing and/or frame changes +GPencilLayer.selected -> select: boolean Layer is selected for editing in the DopeSheet +GPencilLayer.show_points -> show_points: boolean Draw the points which make up the strokes (for debugging purposes) +GPencilLayer.use_onion_skinning -> use_onion_skinning: boolean Ghost frames on either side of frame +GameBooleanProperty.value -> value: boolean Property value +GameObjectSettings.actor -> use_actor: boolean Object is detected by the Near and Radar sensor +GameObjectSettings.all_states -> use_all_states: boolean Set all state bits +GameObjectSettings.anisotropic_friction -> use_anisotropic_friction: boolean Enable anisotropic friction +GameObjectSettings.collision_compound -> use_collision_compound: boolean Add children to form a compound collision object +GameObjectSettings.debug_state -> show_debug_state: boolean Print state debug info in the game engine +GameObjectSettings.ghost -> use_ghost: boolean Object does not restitute collisions, like a ghost +GameObjectSettings.initial_state -> state_initial: boolean Initial state when the game starts +GameObjectSettings.lock_x_axis -> lock_location_x: boolean Disable simulation of linear motion along the X axis +GameObjectSettings.lock_x_rot_axis -> lock_rotation_x: boolean Disable simulation of angular motion along the X axis +GameObjectSettings.lock_y_axis -> lock_location_y: boolean Disable simulation of linear motion along the Y axis +GameObjectSettings.lock_y_rot_axis -> lock_rotation_y: boolean Disable simulation of angular motion along the Y axis +GameObjectSettings.lock_z_axis -> lock_location_z: boolean Disable simulation of linear motion along the Z axis +GameObjectSettings.lock_z_rot_axis -> lock_rotation_z: boolean Disable simulation of angular motion along the Z axis +GameObjectSettings.material_physics -> use_material_physics: boolean Use physics settings in materials +NEGATE * GameObjectSettings.no_sleeping -> use_sleep: boolean Disable auto (de)activation in physics simulation +GameObjectSettings.rotate_from_normal -> use_rotate_from_normal: boolean Use face normal to rotate object, so that it points away from the surface +GameObjectSettings.show_actuators -> show_actuators: boolean Shows actuators for this object in the user interface +GameObjectSettings.show_controllers -> show_controllers: boolean Shows controllers for this object in the user interface +GameObjectSettings.show_sensors -> show_sensors: boolean Shows sensors for this object in the user interface +GameObjectSettings.show_state_panel -> show_state_panel: boolean Show state panel +GameObjectSettings.use_activity_culling -> use_activity_culling: boolean Disable simulation of angular motion along the Z axis +GameObjectSettings.use_collision_bounds -> use_collision_bounds: boolean Specify a collision bounds type other than the default +GameObjectSettings.used_state -> state_used: boolean, (read-only) States which are being used by controllers +GameObjectSettings.visible_state -> state_visible: boolean State determining which controllers are displayed +GameProperty.debug -> show_debug: boolean Print debug information for this property +GameSoftBodySettings.bending_const -> use_bending_constraints: boolean Enable bending constraints +GameSoftBodySettings.cluster_rigid_to_softbody -> use_cluster_rigid_to_softbody: boolean Enable cluster collision between soft and rigid body +GameSoftBodySettings.cluster_soft_to_softbody -> use_cluster_soft_to_softbody: boolean Enable cluster collision between soft and soft body +GameSoftBodySettings.shape_match -> use_shape_match: boolean Enable soft body shape matching goal +GlowSequence.only_boost -> use_only_boost: boolean Show the glow buffer only +GreasePencil.use_stroke_endpoints -> use_stroke_endpoints: boolean Only use the first and last parts of the stroke for snapping +Group.layer -> layer: boolean Layers visible when this groups is instanced as a dupli +ID.fake_user -> use_fake_user: boolean Saves this datablock even if it has no users +ID.tag -> tag: boolean Tools can use this to tag data, (initial state is undefined) +Image.animated -> use_animation: boolean Use as animated texture in the game engine +Image.clamp_x -> use_clamp_x: boolean Disable texture repeating horizontally +Image.clamp_y -> use_clamp_y: boolean Disable texture repeating vertically +Image.dirty -> is_dirty: boolean, (read-only) Image has changed and is not saved +Image.fields -> use_fields: boolean Use fields of the image +Image.has_data -> has_data: boolean, (read-only) True if this image has data +Image.premultiply -> use_premultiply: boolean Convert RGB from key alpha to premultiplied alpha +Image.tiles -> use_tiles: boolean Use of tilemode for faces (default shift-LMB to pick the tile for selected faces) +ImagePaint.invert_stencil -> invert_stencil: boolean Invert the stencil layer +ImagePaint.show_brush -> show_brush: boolean Enables brush shape while not drawing +ImagePaint.show_brush_draw -> show_brush_draw: boolean Enables brush shape while drawing +ImagePaint.use_backface_cull -> use_backface_culling: boolean Ignore faces pointing away from the view (faster) +ImagePaint.use_clone_layer -> use_clone_layer: boolean Use another UV layer as clone source, otherwise use 3D the cursor as the source +ImagePaint.use_normal_falloff -> use_normal_falloff: boolean Paint most on faces pointing towards the view +ImagePaint.use_occlude -> use_occlude: boolean Only paint onto the faces directly under the brush (slower) +ImagePaint.use_projection -> use_projection: boolean Use projection painting for improved consistency in the brush strokes +ImagePaint.use_stencil_layer -> use_stencil_layer: boolean Set the mask layer from the UV layer buttons +ImageSequence.convert_float -> use_float: boolean Convert input to float data +ImageSequence.de_interlace -> use_deinterlace: boolean For video movies to remove fields +ImageSequence.flip_x -> use_flip_x: boolean Flip on the X axis +ImageSequence.flip_y -> use_flip_y: boolean Flip on the Y axis +ImageSequence.premultiply -> use_premultiply: boolean Convert RGB from key alpha to premultiplied alpha +ImageSequence.proxy_custom_directory -> use_proxy_custom_directory: boolean Use a custom directory to store data +ImageSequence.proxy_custom_file -> use_proxy_custom_file: boolean Use a custom file to read proxy data from +ImageSequence.reverse_frames -> use_reverse_frames: boolean Reverse frame order +ImageSequence.use_color_balance -> use_color_balance: boolean (3-Way color correction) on input +ImageSequence.use_crop -> use_crop: boolean Crop image before processing +ImageSequence.use_proxy -> use_proxy: boolean Use a preview proxy for this strip +ImageSequence.use_translation -> use_translation: boolean Translate image before processing +ImageTexture.calculate_alpha -> use_calculate_alpha: boolean Calculates an alpha channel based on RGB values in the image +ImageTexture.checker_even -> use_checker_even: boolean Sets even checker tiles +ImageTexture.checker_odd -> use_checker_odd: boolean Sets odd checker tiles +ImageTexture.filter_size_minimum -> use_minimum_filter_size: boolean Use Filter Size as a minimal filter value in pixels +ImageTexture.flip_axis -> use_flip_axis: boolean Flips the texture's X and Y axis +ImageTexture.interpolation -> use_interpolation: boolean Interpolates pixels using Area filter +ImageTexture.invert_alpha -> invert_alpha: boolean Inverts all the alpha values in the image +ImageTexture.mipmap -> use_mipmap: boolean Uses auto-generated MIP maps for the image +ImageTexture.mipmap_gauss -> use_mipmap_gauss: boolean Uses Gauss filter to sample down MIP maps +ImageTexture.mirror_x -> use_mirror_x: boolean Mirrors the image repetition on the X direction +ImageTexture.mirror_y -> use_mirror_y: boolean Mirrors the image repetition on the Y direction +ImageTexture.normal_map -> use_normal_map: boolean Uses image RGB values for normal mapping +ImageTexture.use_alpha -> use_alpha: boolean Uses the alpha channel information in the image +ImageUser.auto_refresh -> use_auto_refresh: boolean Always refresh image on frame changes +ImageUser.cyclic -> use_cyclic: boolean Cycle the images in the movie +InflowFluidSettings.active -> use: boolean Object contributes to the fluid simulation +InflowFluidSettings.export_animated_mesh -> use_animated_mesh: boolean Export this mesh as an animated one. Slower, only use if really necessary (e.g. armatures or parented objects), animated pos/rot/scale IPOs do not require it +InflowFluidSettings.local_coordinates -> use_local_coordinates: boolean Use local coordinates for inflow. (e.g. for rotating objects) +Itasc.auto_step -> use_auto_step: boolean Automatically determine the optimal number of steps for best performance/accuracy trade off +JoystickSensor.all_events -> use_all_events: boolean Triggered by all events on this joysticks current type (axis/button/hat) +Key.relative -> use_relative: boolean Makes shape keys relative +KeyConfig.user_defined -> is_user_defined: boolean, (read-only) Indicates that a keyconfig was defined by the user +KeyMap.children_expanded -> show_expanded_children: boolean Children expanded in the user interface +KeyMap.items_expanded -> show_expanded_items: boolean Expanded in the user interface +KeyMap.modal -> is_modal: boolean, (read-only) Indicates that a keymap is used for translate modal events for an operator +KeyMap.user_defined -> is_user_defined: boolean Keymap is defined by the user +KeyMapItem.active -> active: boolean Activate or deactivate item +KeyMapItem.alt -> alt: boolean Alt key pressed +KeyMapItem.any -> any: boolean Any modifier keys pressed +KeyMapItem.ctrl -> ctrl: boolean Control key pressed +KeyMapItem.expanded -> show_expanded: boolean Show key map event and property details in the user interface +KeyMapItem.oskey -> oskey: boolean Operating system key pressed +KeyMapItem.shift -> shift: boolean Shift key pressed +KeyboardSensor.all_keys -> use_all_keys: boolean Trigger this sensor on any keystroke +Keyframe.selected -> select: boolean Control point selection status +Keyframe.selected_handle1 -> select_left_handle: boolean Handle 1 selection status +Keyframe.selected_handle2 -> select_right_handle: boolean Handle 2 selection status +KeyingSet.absolute -> use_absolute: boolean Keying Set defines specific paths/settings to be keyframed (i.e. is not reliant on context info) +KeyingSet.insertkey_needed -> use_insertkey_needed: boolean Only insert keyframes where they're needed in the relevant F-Curves +KeyingSet.insertkey_visual -> use_insertkey_visual: boolean Insert keyframes based on 'visual transforms' +KeyingSet.insertkey_xyz_to_rgb -> use_insertkey_xyz_to_rgb: boolean Color for newly added transformation F-Curves (Location, Rotation, Scale) and also Color is based on the transform axis +KeyingSetInfo.insertkey_needed -> use_insertkey_needed: boolean Only insert keyframes where they're needed in the relevant F-Curves +KeyingSetInfo.insertkey_visual -> use_insertkey_visual: boolean Insert keyframes based on 'visual transforms' +KeyingSetInfo.insertkey_xyz_to_rgb -> use_insertkey_xyz_to_rgb: boolean Color for newly added transformation F-Curves (Location, Rotation, Scale) and also Color is based on the transform axis +KeyingSetPath.entire_array -> use_entire_array: boolean When an 'array/vector' type is chosen (Location, Rotation, Color, etc.), entire array is to be used +KeyingSetPath.insertkey_needed -> use_insertkey_needed: boolean Only insert keyframes where they're needed in the relevant F-Curves +KeyingSetPath.insertkey_visual -> use_insertkey_visual: boolean Insert keyframes based on 'visual transforms' +KeyingSetPath.insertkey_xyz_to_rgb -> use_insertkey_xyz_to_rgb: boolean Color for newly added transformation F-Curves (Location, Rotation, Scale) and also Color is based on the transform axis +KinematicConstraint.pos_lock_x -> lock_location_x: boolean Constraint position along X axis +KinematicConstraint.pos_lock_y -> lock_location_y: boolean Constraint position along Y axis +KinematicConstraint.pos_lock_z -> lock_location_z: boolean Constraint position along Z axis +KinematicConstraint.rot_lock_x -> lock_rotation_x: boolean Constraint rotation along X axis +KinematicConstraint.rot_lock_y -> lock_rotation_y: boolean Constraint rotation along Y axis +KinematicConstraint.rot_lock_z -> lock_rotation_z: boolean Constraint rotation along Z axis +KinematicConstraint.use_position -> use_location: boolean Chain follows position of target +KinematicConstraint.use_rotation -> use_rotation: boolean Chain follows rotation of target +KinematicConstraint.use_stretch -> use_stretch: boolean Enable IK Stretching +KinematicConstraint.use_tail -> use_tail: boolean Include bone's tail as last element in chain +KinematicConstraint.use_target -> use_target: boolean Disable for targetless IK +Lamp.diffuse -> use_diffuse: boolean Lamp does diffuse shading +Lamp.layer -> use_own_layer: boolean Illuminates objects only on the same layer the lamp is on +Lamp.negative -> use_negative: boolean Lamp casts negative light +Lamp.specular -> use_specular: boolean Lamp creates specular highlights +LampSkySettings.use_atmosphere -> use_atmosphere: boolean Apply sun effect on atmosphere +LampSkySettings.use_sky -> use_sky: boolean Apply sun effect on sky +LampTextureSlot.map_color -> use_map_color: boolean Lets the texture affect the basic color of the lamp +LampTextureSlot.map_shadow -> use_map_shadow: boolean Lets the texture affect the shadow color of the lamp +Lattice.outside -> use_outside: boolean Only draw, and take into account, the outer vertices +LimitLocationConstraint.limit_transform -> limit_transform: boolean Transforms are affected by this constraint as well +LimitLocationConstraint.use_maximum_x -> use_max_x: boolean Use the maximum X value +LimitLocationConstraint.use_maximum_y -> use_max_y: boolean Use the maximum Y value +LimitLocationConstraint.use_maximum_z -> use_max_z: boolean Use the maximum Z value +LimitLocationConstraint.use_minimum_x -> use_min_x: boolean Use the minimum X value +LimitLocationConstraint.use_minimum_y -> use_min_y: boolean Use the minimum Y value +LimitLocationConstraint.use_minimum_z -> use_min_z: boolean Use the minimum Z value +LimitRotationConstraint.limit_transform -> limit_transform: boolean Transforms are affected by this constraint as well +LimitRotationConstraint.use_limit_x -> use_limit_x: boolean Use the minimum X value +LimitRotationConstraint.use_limit_y -> use_limit_y: boolean Use the minimum Y value +LimitRotationConstraint.use_limit_z -> use_limit_z: boolean Use the minimum Z value +LimitScaleConstraint.limit_transform -> limit_transform: boolean Transforms are affected by this constraint as well +LimitScaleConstraint.use_maximum_x -> use_max_x: boolean Use the maximum X value +LimitScaleConstraint.use_maximum_y -> use_max_y: boolean Use the maximum Y value +LimitScaleConstraint.use_maximum_z -> use_max_z: boolean Use the maximum Z value +LimitScaleConstraint.use_minimum_x -> use_min_x: boolean Use the minimum X value +LimitScaleConstraint.use_minimum_y -> use_min_y: boolean Use the minimum Y value +LimitScaleConstraint.use_minimum_z -> use_min_z: boolean Use the minimum Z value +Main.debug -> show_debug: boolean Print debugging information in console +Main.file_is_saved -> is_saved: boolean, (read-only) Has the current session been saved to disk as a .blend file +MaskModifier.invert -> invert_vertex_group: boolean Use vertices that are not part of region defined +Material.cast_approximate -> use_cast_approximate: boolean Allow this material to cast shadows when using approximate ambient occlusion. +Material.cast_buffer_shadows -> use_cast_buffer_shadows: boolean Allow this material to cast shadows from shadow buffer lamps +Material.cast_shadows_only -> use_cast_shadows_only: boolean Makes objects with this material appear invisible, only casting shadows (not rendered) +Material.cubic -> use_cubic: boolean Use cubic interpolation for diffuse values, for smoother transitions +NEGATE * Material.exclude_mist -> use_mist: boolean Excludes this material from mist effects (in world settings) +Material.face_texture -> use_face_texture: boolean Replaces the object's base color with color from face assigned image textures +Material.face_texture_alpha -> use_face_texture_alpha: boolean Replaces the object's base alpha value with alpha from face assigned image textures +Material.full_oversampling -> use_full_oversampling: boolean Force this material to render full shading/textures for all anti-aliasing samples +Material.invert_z -> invert_z: boolean Renders material's faces with an inverted Z buffer (scanline only) +Material.light_group_exclusive -> use_light_group_exclusive: boolean Material uses the light group exclusively - these lamps are excluded from other scene lighting +Material.object_color -> use_object_color: boolean Modulate the result with a per-object color +Material.only_shadow -> use_only_shadow: boolean Renders shadows as the material's alpha value, making materials transparent except for shadowed areas +Material.ray_shadow_bias -> use_ray_shadow_bias: boolean Prevents raytraced shadow errors on surfaces with smooth shaded normals (terminator problem) +Material.receive_transparent_shadows -> use_transparent_shadows: boolean Allow this object to receive transparent shadows casted through other objects +Material.shadeless -> use_shadeless: boolean Makes this material insensitive to light or shadow +Material.shadows -> use_shadows: boolean Allows this material to receive shadows +Material.tangent_shading -> use_tangent_shading: boolean Use the material's tangent vector instead of the normal for shading - for anisotropic shading effects +Material.traceable -> use_traceable: boolean Include this material and geometry that uses it in ray tracing calculations +Material.transparency -> use_transparency: boolean Render material as transparent +Material.use_diffuse_ramp -> use_diffuse_ramp: boolean Toggle diffuse ramp operations +Material.use_nodes -> use_nodes: boolean Use shader nodes to render the material +Material.use_sky -> use_sky: boolean Renders this material with zero alpha, with sky background in place (scanline only) +Material.use_specular_ramp -> use_specular_ramp: boolean Toggle specular ramp operations +Material.use_textures -> use_textures: boolean Enable/Disable each texture +Material.vertex_color_light -> use_vertex_color_light: boolean Add vertex colors as additional lighting +Material.vertex_color_paint -> use_vertex_color_paint: boolean Replaces object base color with vertex colors (multiplies with 'texture face' face assigned textures) +MaterialHalo.flare_mode -> use_flare_mode: boolean Renders halo as a lensflare +MaterialHalo.lines -> use_lines: boolean Renders star shaped lines over halo +MaterialHalo.ring -> use_ring: boolean Renders rings over halo +MaterialHalo.shaded -> use_shading: boolean Lets halo receive light and shadows from external objects +MaterialHalo.soft -> use_soft: boolean Softens the edges of halos at intersections with other geometry +MaterialHalo.star -> use_star: boolean Renders halo as a star +MaterialHalo.texture -> use_texture: boolean Gives halo a texture +MaterialHalo.vertex_normal -> use_vertex_normal: boolean Uses the vertex normal to specify the dimension of the halo +MaterialHalo.xalpha -> use_extreme_alpha: boolean Uses extreme alpha +MaterialPhysics.align_to_normal -> use_align_to_normal: boolean Align dynamic game objects along the surface normal, when inside the physics distance area +MaterialRaytraceMirror.enabled -> use: boolean Enable raytraced reflections +MaterialStrand.blender_units -> use_blender_units: boolean Use Blender units for widths instead of pixels +MaterialStrand.surface_diffuse -> use_surface_diffuse: boolean Make diffuse shading more similar to shading the surface +MaterialStrand.tangent_shading -> use_tangent_shading: boolean Uses direction of strands as normal for tangent-shading +MaterialSubsurfaceScattering.enabled -> use: boolean Enable diffuse subsurface scatting effects in a material +MaterialTextureSlot.enabled -> use: boolean Enable this material texture slot +MaterialTextureSlot.from_dupli -> use_from_dupli: boolean Dupli's instanced from verts, faces or particles, inherit texture coordinate from their parent +MaterialTextureSlot.from_original -> use_from_original: boolean Dupli's derive their object coordinates from the original objects transformation +MaterialTextureSlot.map_alpha -> use_map_alpha: boolean Causes the texture to affect the alpha value +MaterialTextureSlot.map_ambient -> use_map_ambient: boolean Causes the texture to affect the value of ambient +MaterialTextureSlot.map_colordiff -> use_map_colordiff: boolean Causes the texture to affect basic color of the material +MaterialTextureSlot.map_coloremission -> use_map_coloremission: boolean Causes the texture to affect the color of emission +MaterialTextureSlot.map_colorreflection -> use_map_colorreflection: boolean Causes the texture to affect the color of scattered light +MaterialTextureSlot.map_colorspec -> use_map_colorspec: boolean Causes the texture to affect the specularity color +MaterialTextureSlot.map_colortransmission -> use_map_colortransmission: boolean Causes the texture to affect the result color after other light has been scattered/absorbed +MaterialTextureSlot.map_density -> use_map_density: boolean Causes the texture to affect the volume's density +MaterialTextureSlot.map_diffuse -> use_map_diffuse: boolean Causes the texture to affect the value of the materials diffuse reflectivity +MaterialTextureSlot.map_displacement -> use_map_displacement: boolean Let the texture displace the surface +MaterialTextureSlot.map_emission -> use_map_emission: boolean Causes the texture to affect the volume's emission +MaterialTextureSlot.map_emit -> use_map_emit: boolean Causes the texture to affect the emit value +MaterialTextureSlot.map_hardness -> use_map_hardness: boolean Causes the texture to affect the hardness value +MaterialTextureSlot.map_mirror -> use_map_mirror: boolean Causes the texture to affect the mirror color +MaterialTextureSlot.map_normal -> use_map_normal: boolean Causes the texture to affect the rendered normal +MaterialTextureSlot.map_raymir -> use_map_raymir: boolean Causes the texture to affect the ray-mirror value +MaterialTextureSlot.map_reflection -> use_map_reflect: boolean Causes the texture to affect the reflected light's brightness +MaterialTextureSlot.map_scattering -> use_map_scatter: boolean Causes the texture to affect the volume's scattering +MaterialTextureSlot.map_specular -> use_map_specular: boolean Causes the texture to affect the value of specular reflectivity +MaterialTextureSlot.map_translucency -> use_map_translucency: boolean Causes the texture to affect the translucency value +MaterialTextureSlot.map_warp -> use_map_warp: boolean Let the texture warp texture coordinates of next channels +MaterialTextureSlot.new_bump -> use_new_bump: boolean Use new, corrected bump mapping code (backwards compatibility option) +MaterialVolume.external_shadows -> use_external_shadows: boolean Receive shadows from sources outside the volume (temporary) +MaterialVolume.light_cache -> use_light_cache: boolean Pre-calculate the shading information into a voxel grid, speeds up shading at slightly less accuracy +Mesh.all_edges -> show_all_edges: boolean Displays all edges for wireframe in all view modes in the 3D view +Mesh.auto_texspace -> use_auto_texspace: boolean Adjusts active object's texture space automatically when transforming object +Mesh.autosmooth -> use_autosmooth: boolean Treats all set-smoothed faces with angles less than the specified angle as 'smooth' during render +Mesh.double_sided -> show_double_sided: boolean Render/display the mesh with double or single sided lighting +Mesh.draw_bevel_weights -> show_bevel_weights: boolean Displays weights created for the Bevel modifier +Mesh.draw_creases -> show_creases: boolean Displays creases created for subsurf weighting +Mesh.draw_edge_angle -> show_edge_angle: boolean Displays the angles in the selected edges in degrees +Mesh.draw_edge_lenght -> show_edge_lenght: boolean Displays selected edge lengths +Mesh.draw_edges -> show_edges: boolean Displays selected edges using highlights in the 3D view and UV editor +Mesh.draw_face_area -> show_face_area: boolean Displays the area of selected faces +Mesh.draw_faces -> show_faces: boolean Displays all faces as shades in the 3D view and UV editor +Mesh.draw_normals -> show_normals: boolean Displays face normals as lines +Mesh.draw_seams -> show_seams: boolean Displays UV unwrapping seams +Mesh.draw_sharp -> show_sharp: boolean Displays sharp edges, used with the EdgeSplit modifier +Mesh.draw_vertex_normals -> show_vertex_normals: boolean Displays vertex normals as lines +Mesh.use_mirror_topology -> use_mirror_topology: boolean Use topology based mirroring +Mesh.use_mirror_x -> use_mirror_x: boolean X Axis mirror editing +Mesh.use_paint_mask -> use_paint_mask: boolean Face selection masking for painting +Mesh.vertex_normal_flip -> use_vertex_normal_flip: boolean Flip vertex normals towards the camera during render +MeshColorLayer.active -> active: boolean Sets the layer as active for display and editing +MeshColorLayer.active_render -> active_render: boolean Sets the layer as active for rendering +MeshDeformModifier.dynamic -> dynamic: boolean Recompute binding dynamically on top of other deformers (slower and more memory consuming.) +MeshDeformModifier.invert -> invert_vertex_group: boolean Invert vertex group influence +MeshDeformModifier.is_bound -> is_bound: boolean, (read-only) Whether geometry has been bound to control cage +MeshEdge.fgon -> is_fgon: boolean, (read-only) Fgon edge +MeshEdge.hidden -> hide: boolean +MeshEdge.loose -> is_loose: boolean, (read-only) Loose edge +MeshEdge.seam -> use_seam: boolean Seam edge for UV unwrapping +MeshEdge.selected -> select: boolean +MeshEdge.sharp -> use_sharp: boolean Sharp edge for the EdgeSplit modifier +MeshFace.hidden -> hide: boolean +MeshFace.selected -> select: boolean +MeshFace.smooth -> use_smooth: boolean +MeshTextureFace.alpha_sort -> use_alpha_sort: boolean Enable sorting of faces for correct alpha drawing (slow, use Clip Alpha instead when possible) +MeshTextureFace.billboard -> use_billboard: boolean Billboard with Z-axis constraint +MeshTextureFace.collision -> use_collision: boolean Use face for collision and ray-sensor detection +MeshTextureFace.halo -> use_halo: boolean Screen aligned billboard +MeshTextureFace.invisible -> hide: boolean Make face invisible +MeshTextureFace.light -> use_light: boolean Use light for face +MeshTextureFace.object_color -> use_object_color: boolean Use ObColor instead of vertex colors +MeshTextureFace.shadow -> use_shadow_face: boolean Face is used for shadow +MeshTextureFace.shared -> use_blend_shared: boolean Blend vertex colors across face when vertices are shared +MeshTextureFace.tex -> use_texture: boolean Render face with texture +MeshTextureFace.text -> use_bitmap_text: boolean Enable bitmap text on face +MeshTextureFace.twoside -> use_twoside: boolean Render face two-sided +MeshTextureFace.uv_pinned -> uv_pin: boolean +MeshTextureFace.uv_selected -> uv_select: boolean +MeshTextureFaceLayer.active -> active: boolean Sets the layer as active for display and editing +MeshTextureFaceLayer.active_clone -> active_clone: boolean Sets the layer as active for cloning +MeshTextureFaceLayer.active_render -> active_render: boolean Sets the layer as active for rendering +MeshVertex.hidden -> hide: boolean +MeshVertex.selected -> select: boolean +MetaBall.auto_texspace -> use_auto_texspace: boolean Adjusts active object's texture space automatically when transforming object +MetaElement.hide -> hide: boolean Hide element +MetaElement.negative -> use_negative: boolean Set metaball as negative one +MetaSequence.convert_float -> use_float: boolean Convert input to float data +MetaSequence.de_interlace -> use_deinterlace: boolean For video movies to remove fields +MetaSequence.flip_x -> use_flip_x: boolean Flip on the X axis +MetaSequence.flip_y -> use_flip_y: boolean Flip on the Y axis +MetaSequence.premultiply -> use_premultiply: boolean Convert RGB from key alpha to premultiplied alpha +MetaSequence.proxy_custom_directory -> use_proxy_custom_directory: boolean Use a custom directory to store data +MetaSequence.proxy_custom_file -> use_proxy_custom_file: boolean Use a custom file to read proxy data from +MetaSequence.reverse_frames -> use_reverse_frames: boolean Reverse frame order +MetaSequence.use_color_balance -> use_color_balance: boolean (3-Way color correction) on input +MetaSequence.use_crop -> use_crop: boolean Crop image before processing +MetaSequence.use_proxy -> use_proxy: boolean Use a preview proxy for this strip +MetaSequence.use_translation -> use_translation: boolean Translate image before processing +MirrorModifier.clip -> use_clip: boolean Prevents vertices from going through the mirror during transform +MirrorModifier.mirror_u -> use_mirror_u: boolean Mirror the U texture coordinate around the 0.5 point +MirrorModifier.mirror_v -> use_mirror_v: boolean Mirror the V texture coordinate around the 0.5 point +MirrorModifier.mirror_vertex_groups -> use_mirror_vertex_groups: boolean Mirror vertex groups (e.g. .R->.L) +MirrorModifier.x -> use_x: boolean Enable X axis mirror +MirrorModifier.y -> use_y: boolean Enable Y axis mirror +MirrorModifier.z -> use_z: boolean Enable Z axis mirror +Modifier.editmode -> show_in_editmode: boolean Use modifier while in the edit mode +Modifier.expanded -> show_expanded: boolean Set modifier expanded in the user interface +Modifier.on_cage -> show_on_cage: boolean Enable direct editing of modifier control cage +Modifier.realtime -> show_realtime: boolean Realtime display of a modifier +Modifier.render -> use_render: boolean Use modifier during rendering +MotionPath.editing -> is_edited: boolean Path is being edited +MotionPath.use_bone_head -> use_bone_head: boolean, (read-only) For PoseBone paths, use the bone head location when calculating this path +MotionPathVert.selected -> select: boolean Path point is selected for editing +MovieSequence.convert_float -> use_float: boolean Convert input to float data +MovieSequence.de_interlace -> use_deinterlace: boolean For video movies to remove fields +MovieSequence.flip_x -> use_flip_x: boolean Flip on the X axis +MovieSequence.flip_y -> use_flip_y: boolean Flip on the Y axis +MovieSequence.premultiply -> use_premultiply: boolean Convert RGB from key alpha to premultiplied alpha +MovieSequence.proxy_custom_directory -> use_proxy_custom_directory: boolean Use a custom directory to store data +MovieSequence.proxy_custom_file -> use_proxy_custom_file: boolean Use a custom file to read proxy data from +MovieSequence.reverse_frames -> use_reverse_frames: boolean Reverse frame order +MovieSequence.use_color_balance -> use_color_balance: boolean (3-Way color correction) on input +MovieSequence.use_crop -> use_crop: boolean Crop image before processing +MovieSequence.use_proxy -> use_proxy: boolean Use a preview proxy for this strip +MovieSequence.use_translation -> use_translation: boolean Translate image before processing +MulticamSequence.convert_float -> use_float: boolean Convert input to float data +MulticamSequence.de_interlace -> use_deinterlace: boolean For video movies to remove fields +MulticamSequence.flip_x -> use_flip_x: boolean Flip on the X axis +MulticamSequence.flip_y -> use_flip_y: boolean Flip on the Y axis +MulticamSequence.premultiply -> use_premultiply: boolean Convert RGB from key alpha to premultiplied alpha +MulticamSequence.proxy_custom_directory -> use_proxy_custom_directory: boolean Use a custom directory to store data +MulticamSequence.proxy_custom_file -> use_proxy_custom_file: boolean Use a custom file to read proxy data from +MulticamSequence.reverse_frames -> use_reverse_frames: boolean Reverse frame order +MulticamSequence.use_color_balance -> use_color_balance: boolean (3-Way color correction) on input +MulticamSequence.use_crop -> use_crop: boolean Crop image before processing +MulticamSequence.use_proxy -> use_proxy: boolean Use a preview proxy for this strip +MulticamSequence.use_translation -> use_translation: boolean Translate image before processing +MultiresModifier.external -> is_external: boolean, (read-only) Store multires displacements outside the .blend file, to save memory +MultiresModifier.optimal_display -> show_only_control_edges: boolean Skip drawing/rendering of interior subdivided edges +NetRenderSettings.master_broadcast -> use_master_broadcast: boolean broadcast master server address on local network +NetRenderSettings.master_clear -> use_master_clear: boolean delete saved files on exit +NetRenderSettings.slave_clear -> use_slave_clear: boolean delete downloaded files on exit +NetRenderSettings.slave_outputlog -> use_slave_output_log: boolean Output render text log to console as well as sending it to the master +NetRenderSettings.slave_thumb -> use_slave_thumb: boolean Generate thumbnails on slaves instead of master +NlaStrip.active -> active: boolean, (read-only) NLA Strip is active +NlaStrip.animated_influence -> use_animated_influence: boolean Influence setting is controlled by an F-Curve rather than automatically determined +NlaStrip.animated_time -> use_animated_time: boolean Strip time is controlled by an F-Curve rather than automatically determined +NlaStrip.animated_time_cyclic -> use_animated_time_cyclic: boolean Cycle the animated time within the action start & end +NlaStrip.auto_blending -> use_auto_blend: boolean Number of frames for Blending In/Out is automatically determined from overlapping strips +NlaStrip.muted -> mute: boolean NLA Strip is not evaluated +NlaStrip.reversed -> use_reverse: boolean NLA Strip is played back in reverse order (only when timing is automatically determined) +NlaStrip.selected -> select: boolean NLA Strip is selected +NlaTrack.active -> active: boolean, (read-only) NLA Track is active +NlaTrack.locked -> lock: boolean NLA Track is locked +NlaTrack.muted -> mute: boolean NLA Track is not evaluated +NlaTrack.selected -> select: boolean NLA Track is selected +NlaTrack.solo -> is_solo: boolean, (read-only) NLA Track is evaluated itself (i.e. active Action and all other NLA Tracks in the same AnimData block are disabled) +Object.draw_axis -> show_axis: boolean Displays the object's origin and axis +Object.draw_bounds -> show_bounds: boolean Displays the object's bounds +Object.draw_name -> show_name: boolean Displays the object's name +Object.draw_texture_space -> show_texture_space: boolean Displays the object's texture space +Object.draw_transparent -> show_transparent: boolean Enables transparent materials for the object (Mesh only) +Object.draw_wire -> show_wire: boolean Adds the object's wireframe over solid drawing +Object.duplis_used -> is_duplicator: boolean, (read-only) +Object.layers -> layer: boolean Layers the object is on +Object.lock_location -> lock_location: boolean Lock editing of location in the interface +Object.lock_rotation -> lock_rotation: boolean Lock editing of rotation in the interface +Object.lock_rotation_w -> lock_rotation_w: boolean Lock editing of 'angle' component of four-component rotations in the interface +Object.lock_rotations_4d -> lock_rotations_4d: boolean Lock editing of four component rotations by components (instead of as Eulers) +Object.lock_scale -> lock_scale: boolean Lock editing of scale in the interface +Object.restrict_render -> restrict_render: boolean Restrict renderability +Object.restrict_select -> restrict_select: boolean Restrict selection in the viewport +Object.restrict_view -> restrict_view: boolean Restrict visibility in the viewport +Object.selected -> select: boolean Object selection state +Object.shape_key_edit_mode -> use_shape_key_edit_mode: boolean Apply shape keys in edit mode (for Meshes only) +Object.shape_key_lock -> show_shape_key: boolean Always show the current Shape for this Object +Object.slow_parent -> use_slow_parent: boolean Create a delay in the parent relationship +Object.time_offset_add_parent -> use_time_offset_add_parent: boolean Add the parents time offset value +Object.time_offset_edit -> use_time_offset_edit: boolean Use time offset when inserting keys and display time offset for F-Curve and action views +Object.time_offset_parent -> use_time_offset_parent: boolean Apply the time offset to this objects parent relationship +Object.time_offset_particle -> use_time_offset_particle: boolean Let the time offset work on the particle effect +Object.use_dupli_faces_scale -> use_dupli_faces_scale: boolean Scale dupli based on face size +Object.use_dupli_frames_speed -> use_dupli_frames_speed: boolean Set dupliframes to use the frame +Object.use_dupli_verts_rotation -> use_dupli_verts_rotation: boolean Rotate dupli according to vertex normal +Object.x_ray -> show_x_ray: boolean Makes the object draw in front of others +ObjectActuator.add_linear_velocity -> use_add_linear_velocity: boolean Toggles between ADD and SET linV +ObjectActuator.local_angular_velocity -> use_local_angular_velocity: boolean Angular velocity is defined in local coordinates +ObjectActuator.local_force -> use_local_force: boolean Force is defined in local coordinates +ObjectActuator.local_linear_velocity -> use_local_linear_velocity: boolean Velocity is defined in local coordinates +ObjectActuator.local_location -> use_local_location: boolean Location is defined in local coordinates +ObjectActuator.local_rotation -> use_local_rotation: boolean Rotation is defined in local coordinates +ObjectActuator.local_torque -> use_local_torque: boolean Torque is defined in local coordinates +ObjectActuator.servo_limit_x -> use_servo_limit_x: boolean Set limit to force along the X axis +ObjectActuator.servo_limit_y -> use_servo_limit_y: boolean Set limit to force along the Y axis +ObjectActuator.servo_limit_z -> use_servo_limit_z: boolean Set limit to force along the Z axis +ObjectBase.layers -> layer: boolean Layers the object base is on +ObjectBase.selected -> select: boolean Object base selection state +ObstacleFluidSettings.active -> use: boolean Object contributes to the fluid simulation +ObstacleFluidSettings.export_animated_mesh -> use_animated_mesh: boolean Export this mesh as an animated one. Slower, only use if really necessary (e.g. armatures or parented objects), animated pos/rot/scale IPOs do not require it +Operator.has_reports -> has_reports: boolean, (read-only) Operator has a set of reports (warnings and errors) from last execution +OperatorStrokeElement.flip -> use_flip: boolean +OutflowFluidSettings.active -> use: boolean Object contributes to the fluid simulation +OutflowFluidSettings.export_animated_mesh -> use_animated_mesh: boolean Export this mesh as an animated one. Slower, only use if really necessary (e.g. armatures or parented objects), animated pos/rot/scale IPOs do not require it +Paint.fast_navigate -> show_low_resolution: boolean For multires, show low resolution while navigating the view +Paint.show_brush -> show_brush: boolean +Panel.bl_default_closed -> bl_use_closed: boolean +Panel.bl_show_header -> bl_show_header: boolean +ParentActuator.compound -> use_compound: boolean Add this object shape to the parent shape (only if the parent shape is already compound) +ParentActuator.ghost -> use_ghost: boolean Make this object ghost while parented (only if not compound) +ParticleBrush.use_puff_volume -> use_puff_volume: boolean Apply puff to unselected end-points, (helps maintain hair volume when puffing root) +ParticleEdit.add_interpolate -> use_add_interpolate: boolean Interpolate new particles from the existing ones +ParticleEdit.auto_velocity -> use_auto_velocity: boolean Calculate point velocities automatically +ParticleEdit.draw_particles -> show_particles: boolean Draw actual particles +ParticleEdit.editable -> is_editable: boolean, (read-only) A valid edit mode exists +ParticleEdit.emitter_deflect -> use_emitter_deflect: boolean Keep paths from intersecting the emitter +ParticleEdit.fade_time -> use_fade_time: boolean Fade paths and keys further away from current frame +ParticleEdit.hair -> is_hair: boolean, (read-only) Editing hair +ParticleEdit.keep_lengths -> use_preserve_lengths: boolean Keep path lengths constant +ParticleEdit.keep_root -> use_preserve_root: boolean Keep root keys unmodified +ParticleFluidSettings.drops -> use_drops: boolean Show drop particles +ParticleFluidSettings.floats -> use_floats: boolean Show floating foam particles +ParticleFluidSettings.tracer -> use_tracer: boolean Show tracer particles +ParticleInstanceModifier.alive -> use_alive: boolean Show instances when particles are alive +ParticleInstanceModifier.children -> use_children: boolean Create instances from child particles +ParticleInstanceModifier.dead -> use_dead: boolean Show instances when particles are dead +ParticleInstanceModifier.keep_shape -> use_preserve_shape: boolean Don't stretch the object +ParticleInstanceModifier.normal -> use_normal: boolean Create instances from normal particles +ParticleInstanceModifier.size -> use_size: boolean Use particle size to scale the instances +ParticleInstanceModifier.unborn -> use_unborn: boolean Show instances when particles are unborn +ParticleInstanceModifier.use_path -> use_path: boolean Create instances along particle paths +ParticleSettings.abs_path_time -> use_absolute_path_time: boolean Path timing is in absolute frames +ParticleSettings.animate_branching -> use_animate_branching: boolean Animate branching +ParticleSettings.billboard_lock -> lock_billboard: boolean Lock the billboards align axis +ParticleSettings.boids_2d -> lock_boids_to_surface: boolean Constrain boids to a surface +ParticleSettings.branching -> use_branching: boolean Branch child paths from each other +ParticleSettings.child_effector -> apply_effector_to_children: boolean Apply effectors to children +ParticleSettings.child_guide -> apply_guide_to_children: boolean +ParticleSettings.die_on_collision -> use_die_on_collision: boolean Particles die when they collide with a deflector object +ParticleSettings.died -> use_died: boolean Show particles after they have died +ParticleSettings.draw_health -> show_health: boolean Draw boid health +ParticleSettings.emitter -> use_render_emitter: boolean Render emitter Object also +ParticleSettings.enable_simplify -> use_simplify: boolean Remove child strands as the object becomes smaller on the screen +ParticleSettings.even_distribution -> use_even_distribution: boolean Use even distribution from faces based on face areas or edge lengths +ParticleSettings.grid_invert -> invert_grid: boolean Invert what is considered object and what is not +ParticleSettings.hair_bspline -> use_hair_bspline: boolean Interpolate hair using B-Splines +ParticleSettings.material_color -> show_material_color: boolean Draw particles using material's diffuse color +ParticleSettings.num -> show_number: boolean Show particle number +ParticleSettings.parent -> use_parents: boolean Render parent particles +ParticleSettings.rand_group -> use_group_pick_random: boolean Pick objects from group randomly +ParticleSettings.react_multiple -> use_react_multiple: boolean React multiple times +ParticleSettings.react_start_end -> use_react_start_end: boolean Give birth to unreacted particles eventually +ParticleSettings.render_adaptive -> use_render_adaptive: boolean Use adapative rendering for paths +ParticleSettings.render_strand -> use_strand_primitive: boolean Use the strand primitive for rendering +ParticleSettings.rotation_dynamic -> use_dynamic_rotation: boolean Sets rotation to dynamic/constant +ParticleSettings.self_effect -> use_self_effect: boolean Particle effectors effect themselves +ParticleSettings.show_size -> show_size: boolean Show particle size +ParticleSettings.size_deflect -> use_size_deflect: boolean Use particle's size in deflection +ParticleSettings.sizemass -> use_multiply_size_mass: boolean Multiply mass by particle size +ParticleSettings.symmetric_branching -> use_symmetric_branching: boolean Start and end points are the same +ParticleSettings.trand -> use_emit_random: boolean Emit in random order of elements +ParticleSettings.unborn -> use_unborn: boolean Show particles before they are emitted +ParticleSettings.use_global_dupli -> use_global_dupli: boolean Use object's global coordinates for duplication +ParticleSettings.use_group_count -> use_group_count: boolean Use object multiple times in the same group +ParticleSettings.velocity -> show_velocity: boolean Show particle velocity +ParticleSettings.velocity_length -> use_velocity_length: boolean Multiply line length by particle speed +ParticleSettings.viewport -> use_simplify_viewport: boolean +ParticleSettings.whole_group -> use_whole_group: boolean Use whole group at once +ParticleSystem.editable -> is_editable: boolean, (read-only) Particle system can be edited in particle mode +ParticleSystem.edited -> is_edited: boolean, (read-only) Particle system has been edited in particle mode +ParticleSystem.global_hair -> is_global_hair: boolean, (read-only) Hair keys are in global coordinate space +ParticleSystem.hair_dynamics -> use_hair_dynamics: boolean Enable hair dynamics using cloth simulation +ParticleSystem.keyed_timing -> use_keyed_timing: boolean Use key times +ParticleSystem.multiple_caches -> has_multiple_caches: boolean, (read-only) Particle system has multiple point caches +ParticleSystem.vertex_group_clump_negate -> invert_vertex_group_clump: boolean Negate the effect of the clump vertex group +ParticleSystem.vertex_group_density_negate -> invert_vertex_group_density: boolean Negate the effect of the density vertex group +ParticleSystem.vertex_group_field_negate -> invert_vertex_group_field: boolean Negate the effect of the field vertex group +ParticleSystem.vertex_group_kink_negate -> invert_vertex_group_kink: boolean Negate the effect of the kink vertex group +ParticleSystem.vertex_group_length_negate -> invert_vertex_group_length: boolean Negate the effect of the length vertex group +ParticleSystem.vertex_group_rotation_negate -> invert_vertex_group_rotation: boolean Negate the effect of the rotation vertex group +ParticleSystem.vertex_group_roughness1_negate -> invert_vertex_group_roughness1: boolean Negate the effect of the roughness 1 vertex group +ParticleSystem.vertex_group_roughness2_negate -> invert_vertex_group_roughness2: boolean Negate the effect of the roughness 2 vertex group +ParticleSystem.vertex_group_roughness_end_negate -> invert_vertex_group_roughness_end: boolean Negate the effect of the roughness end vertex group +ParticleSystem.vertex_group_size_negate -> invert_vertex_group_size: boolean Negate the effect of the size vertex group +ParticleSystem.vertex_group_tangent_negate -> invert_vertex_group_tangent: boolean Negate the effect of the tangent vertex group +ParticleSystem.vertex_group_velocity_negate -> invert_vertex_group_velocity: boolean Negate the effect of the velocity vertex group +ParticleTarget.valid -> is_valid: boolean Keyed particles target is valid +PivotConstraint.use_relative_position -> use_relative_location: boolean Offset will be an absolute point in space instead of relative to the target +PointCache.baked -> is_baked: boolean, (read-only) +PointCache.baking -> is_baking: boolean, (read-only) +PointCache.disk_cache -> use_disk_cache: boolean Save cache files to disk (.blend file must be saved first) +PointCache.external -> use_external: boolean Read cache from an external location +PointCache.has_skipped_frames-> frames_skipped: boolean, (read-only) +PointCache.outdated -> is_outdated: boolean, (read-only) +PointCache.quick_cache -> use_quick_cache: boolean Update simulation with cache steps +PointCache.use_library_path -> use_library_path: boolean Use this files path when library linked into another file. +PointDensity.turbulence -> use_turbulence: boolean Add directed noise to the density at render-time +PointLamp.only_shadow -> use_only_shadow: boolean Causes light to cast shadows only without illuminating objects +PointLamp.shadow_layer -> use_shadow_layer: boolean Causes only objects on the same layer to cast shadows +PointLamp.sphere -> use_sphere: boolean Sets light intensity to zero beyond lamp distance +PoseBone.has_ik -> is_in_ik_chain: boolean, (read-only) Is part of an IK chain +NEGATE * PoseBone.ik_dof_x -> lock_ik_x: boolean Allow movement around the X axis +NEGATE * PoseBone.ik_dof_y -> lock_ik_y: boolean Allow movement around the Y axis +NEGATE * PoseBone.ik_dof_z -> lock_ik_z: boolean Allow movement around the Z axis +PoseBone.ik_limit_x -> lock_ik_x: boolean Limit movement around the X axis +PoseBone.ik_limit_y -> lock_ik_y: boolean Limit movement around the Y axis +PoseBone.ik_limit_z -> lock_ik_z: boolean Limit movement around the Z axis +PoseBone.ik_lin_control -> use_ik_lin_control: boolean Apply channel size as IK constraint if stretching is enabled +PoseBone.ik_rot_control -> use_ik_rot_control: boolean Apply channel rotation as IK constraint +PoseBone.lock_location -> lock_location: boolean Lock editing of location in the interface +PoseBone.lock_rotation -> lock_rotation: boolean Lock editing of rotation in the interface +PoseBone.lock_rotation_w -> lock_rotation_w: boolean Lock editing of 'angle' component of four-component rotations in the interface +PoseBone.lock_rotations_4d -> lock_rotations_4d: boolean Lock editing of four component rotations by components (instead of as Eulers) +PoseBone.lock_scale -> lock_scale: boolean Lock editing of scale in the interface +PoseBone.selected -> select: boolean +PoseTemplateSettings.generate_def_rig -> use_generate_deform_rig: boolean Create a copy of the metarig, constrainted by the generated rig +Property.is_never_none -> is_never_none: boolean, (read-only) True when this value can't be set to None +Property.is_readonly -> is_readonly: boolean, (read-only) Property is editable through RNA +Property.is_required -> is_required: boolean, (read-only) False when this property is an optional argument in an RNA function +Property.registered -> is_registered: boolean, (read-only) Property is registered as part of type registration +Property.registered_optional -> is_registered_optional: boolean, (read-only) Property is optionally registered as part of type registration +Property.use_output -> is_output: boolean, (read-only) True when this property is an output value from an RNA function +PythonConstraint.script_error -> has_script_error: boolean, (read-only) The linked Python script has thrown an error +PythonConstraint.use_targets -> use_targets: boolean Use the targets indicated in the constraint panel +PythonController.debug -> use_debug: boolean Continuously reload the module from disk for editing external modules without restarting +RandomActuator.always_true -> use_always_true: boolean Always false or always true +RaySensor.x_ray_mode -> use_x_ray: boolean See through objects that don't have the property +RegionView3D.box_clip -> use_box_clip: boolean Clip objects based on what's visible in other side views +RegionView3D.box_preview -> show_synced_view: boolean Sync view position between side views +RegionView3D.lock_rotation -> lock_rotation: boolean Lock view rotation in side views +RenderEngine.bl_postprocess -> bl_use_postprocess: boolean +RenderEngine.bl_preview -> bl_use_preview: boolean +RenderLayer.all_z -> use_all_z: boolean, (read-only) Fill in Z values for solid faces in invisible layers, for masking +RenderLayer.edge -> use_edge_enhance: boolean, (read-only) Render Edge-enhance in this Layer (only works for Solid faces) +RenderLayer.enabled -> use: boolean, (read-only) Disable or enable the render layer +RenderLayer.halo -> use_halo: boolean, (read-only) Render Halos in this Layer (on top of Solid) +RenderLayer.pass_ao -> use_pass_ambient_occlusion: boolean, (read-only) Deliver AO pass +RenderLayer.pass_ao_exclude -> exclude_ambient_occlusion: boolean, (read-only) Exclude AO pass from combined +RenderLayer.pass_color -> use_pass_color: boolean, (read-only) Deliver shade-less color pass +RenderLayer.pass_combined -> use_pass_combined: boolean, (read-only) Deliver full combined RGBA buffer +RenderLayer.pass_diffuse -> use_pass_diffuse: boolean, (read-only) Deliver diffuse pass +RenderLayer.pass_emit -> use_pass_emit: boolean, (read-only) Deliver emission pass +RenderLayer.pass_emit_exclude -> exclude_emit: boolean, (read-only) Exclude emission pass from combined +RenderLayer.pass_environment -> use_pass_environment: boolean, (read-only) Deliver environment lighting pass +RenderLayer.pass_environment_exclude -> exclude_environment: boolean, (read-only) Exclude environment pass from combined +RenderLayer.pass_indirect -> use_pass_indirect: boolean, (read-only) Deliver indirect lighting pass +RenderLayer.pass_indirect_exclude -> exclude_indirect: boolean, (read-only) Exclude indirect pass from combined +RenderLayer.pass_mist -> use_pass_mist: boolean, (read-only) Deliver mist factor pass (0.0-1.0) +RenderLayer.pass_normal -> use_pass_normal: boolean, (read-only) Deliver normal pass +RenderLayer.pass_object_index -> use_pass_object_index: boolean, (read-only) Deliver object index pass +RenderLayer.pass_reflection -> use_pass_reflection: boolean, (read-only) Deliver raytraced reflection pass +RenderLayer.pass_reflection_exclude -> exclude_reflection: boolean, (read-only) Exclude raytraced reflection pass from combined +RenderLayer.pass_refraction -> use_pass_refraction: boolean, (read-only) Deliver raytraced refraction pass +RenderLayer.pass_refraction_exclude -> exclude_refraction: boolean, (read-only) Exclude raytraced refraction pass from combined +RenderLayer.pass_shadow -> use_pass_shadow: boolean, (read-only) Deliver shadow pass +RenderLayer.pass_shadow_exclude -> exclude_shadow: boolean, (read-only) Exclude shadow pass from combined +RenderLayer.pass_specular -> use_pass_specular: boolean, (read-only) Deliver specular pass +RenderLayer.pass_specular_exclude -> exclude_specular: boolean, (read-only) Exclude specular pass from combined +RenderLayer.pass_uv -> use_pass_uv: boolean, (read-only) Deliver texture UV pass +RenderLayer.pass_vector -> use_pass_vector: boolean, (read-only) Deliver speed vector pass +RenderLayer.pass_z -> use_pass_z: boolean, (read-only) Deliver Z values pass +RenderLayer.sky -> use_sky: boolean, (read-only) Render Sky in this Layer +RenderLayer.solid -> use_solid: boolean, (read-only) Render Solid faces in this Layer +RenderLayer.strand -> use_strand: boolean, (read-only) Render Strands in this Layer +RenderLayer.visible_layers -> layer: boolean, (read-only) Scene layers included in this render layer +RenderLayer.zmask -> use_zmask: boolean, (read-only) Only render what's in front of the solid z values +RenderLayer.zmask_layers -> layer_zmask: boolean, (read-only) Zmask scene layers +RenderLayer.zmask_negate -> invert_zmask: boolean, (read-only) For Zmask, only render what is behind solid z values instead of in front +RenderLayer.ztransp -> use_ztransp: boolean, (read-only) Render Z-Transparent faces in this Layer (On top of Solid and Halos) +RenderSettings.backbuf -> use_backbuf: boolean Render backbuffer image +RenderSettings.bake_active -> use_bake_active_to_selected: boolean Bake shading on the surface of selected objects to the active object +RenderSettings.bake_clear -> use_bake_clear: boolean Clear Images before baking +RenderSettings.bake_enable_aa -> use_bake_antialiasing: boolean Enables Anti-aliasing +RenderSettings.bake_normalized -> use_bake_normalized: boolean With displacement normalize to the distance, with ambient occlusion normalize without using material settings +RenderSettings.cineon_log -> use_cineon_log: boolean Convert to logarithmic color space +RenderSettings.color_management -> use_color_management: boolean Use color profiles and gamma corrected imaging pipeline +RenderSettings.crop_to_border -> use_crop_to_border: boolean Crop the rendered frame to the defined border size +RenderSettings.edge -> use_edge_enhance: boolean use_Create a toon outline around the edges of geometry +RenderSettings.exr_half -> use_exr_half: boolean Use 16 bit floats instead of 32 bit floats per channel +RenderSettings.exr_preview -> use_exr_preview: boolean When rendering animations, save JPG preview images in same directory +RenderSettings.exr_zbuf -> use_exr_zbuf: boolean Save the z-depth per pixel (32 bit unsigned int zbuffer) +RenderSettings.ffmpeg_autosplit -> use_ffmpeg_autosplit: boolean Autosplit output at 2GB boundary +RenderSettings.fields -> use_fields: boolean Render image to two fields per frame, for interlaced TV output +RenderSettings.fields_still -> use_fields_still: boolean Disable the time difference between fields +RenderSettings.free_image_textures -> use_free_image_textures: boolean Free all image texture from memory after render, to save memory before compositing +RenderSettings.free_unused_nodes -> use_free_unused_nodes: boolean Free Nodes that are not used while compositing, to save memory +RenderSettings.full_sample -> use_full_sample: boolean Save for every anti-aliasing sample the entire RenderLayer results. This solves anti-aliasing issues with compositing +RenderSettings.is_movie_format -> is_movie_format: boolean, (read-only) When true the format is a movie +RenderSettings.jpeg2k_ycc -> use_jpeg2k_ycc: boolean Save luminance-chrominance-chrominance channels instead of RGB colors +RenderSettings.motion_blur -> use_motion_blur: boolean Use multi-sampled 3D scene motion blur +RenderSettings.multiple_engines -> has_multiple_engines: boolean, (read-only) More than one rendering engine is available +RenderSettings.render_antialiasing -> use_antialiasing: boolean Render and combine multiple samples per pixel to prevent jagged edges +RenderSettings.render_stamp -> use_stamp: boolean Render the stamp info text in the rendered image +RenderSettings.save_buffers -> use_save_buffers: boolean Save tiles for all RenderLayers and SceneNodes to files in the temp directory (saves memory, required for Full Sample) +RenderSettings.simplify_triangulate -> use_simplify_triangulate: boolean Disables non-planer quads being triangulated +RenderSettings.single_layer -> use_single_layer: boolean Only render the active layer +RenderSettings.stamp_camera -> use_stamp_camera: boolean Include the name of the active camera in image metadata +RenderSettings.stamp_date -> use_stamp_date: boolean Include the current date in image metadata +RenderSettings.stamp_filename -> use_stamp_filename: boolean Include the filename of the .blend file in image metadata +RenderSettings.stamp_frame -> use_stamp_frame: boolean Include the frame number in image metadata +RenderSettings.stamp_marker -> use_stamp_marker: boolean Include the name of the last marker in image metadata +RenderSettings.stamp_note -> use_stamp_note: boolean Include a custom note in image metadata +RenderSettings.stamp_render_time -> use_stamp_render_time: boolean Include the render time in the stamp image +RenderSettings.stamp_scene -> use_stamp_scene: boolean Include the name of the active scene in image metadata +RenderSettings.stamp_sequencer_strip -> use_stamp_sequencer_strip: boolean Include the name of the foreground sequence strip in image metadata +RenderSettings.stamp_time -> use_stamp_time: boolean Include the render frame as HH:MM:SS.FF in image metadata +RenderSettings.tiff_bit -> use_tiff_16bit: boolean Save TIFF with 16 bits per channel +RenderSettings.use_border -> use_border: boolean Render a user-defined border region, within the frame size. Note, this disables save_buffers and full_sample +RenderSettings.use_compositing -> use_compositing: boolean Process the render result through the compositing pipeline, if compositing nodes are enabled +RenderSettings.use_envmaps -> use_envmaps: boolean Calculate environment maps while rendering +RenderSettings.use_file_extension -> use_file_extension: boolean Add the file format extensions to the rendered file name (eg: filename + .jpg) +RenderSettings.use_game_engine -> use_game_engine: boolean, (read-only) Current rendering engine is a game engine +RenderSettings.use_instances -> use_instances: boolean Instance support leads to effective memory reduction when using duplicates +RenderSettings.use_local_coords -> use_local_coords: boolean Vertex coordinates are stored localy on each primitive. Increases memory usage, but may have impact on speed +RenderSettings.use_overwrite -> use_overwrite: boolean Overwrite existing files while rendering +RenderSettings.use_placeholder -> use_placeholder: boolean Create empty placeholder files while rendering frames (similar to Unix 'touch') +RenderSettings.use_radiosity -> use_radiosity: boolean Calculate radiosity in a pre-process before rendering +RenderSettings.use_raytracing -> use_raytrace: boolean Pre-calculate the raytrace accelerator and render raytracing effects +RenderSettings.use_sequencer -> use_sequencer: boolean Process the render (and composited) result through the video sequence editor pipeline, if sequencer strips exist +RenderSettings.use_sequencer_gl_preview -> use_sequencer_gl_preview: boolean +RenderSettings.use_sequencer_gl_render -> use_sequencer_gl_render: boolean +RenderSettings.use_shadows -> use_shadows: boolean Calculate shadows while rendering +RenderSettings.use_simplify -> use_simplify: boolean Enable simplification of scene for quicker preview renders +RenderSettings.use_sss -> use_sss: boolean Calculate sub-surface scattering in materials rendering +RenderSettings.use_textures -> use_textures: boolean Use textures to affect material properties +NEGATE * RigidBodyJointConstraint.disable_linked_collision -> use_linked_collision: boolean Disable collision between linked bodies +RigidBodyJointConstraint.draw_pivot -> show_pivot: boolean Display the pivot point and rotation in 3D view +Scene.frame_drop -> use_frame_drop: boolean Play back dropping frames if frame display is too slow +Scene.layers -> layer: boolean Layers visible when rendering the scene +Scene.mute_audio -> mute_audio: boolean Play back of audio from Sequence Editor will be muted +Scene.nla_tweakmode_on -> use_nla_tweakmode: boolean, (read-only) Indicates whether there is any action referenced by NLA being edited. Strictly read-only +Scene.pov_radio_always_sample -> use_pov_radio_always_sample: boolean Only use the data from the pretrace step and not gather any new samples during the final radiosity pass +Scene.pov_radio_display_advanced -> show_pov_radio_advanced: boolean Show advanced options +Scene.pov_radio_enable -> use_pov_radio: boolean Enable povrays radiosity calculation +Scene.pov_radio_media -> use_pov_radio_media: boolean Radiosity estimation can be affected by media +Scene.pov_radio_normal -> use_pov_radio_normal: boolean Radiosity estimation can be affected by normals +Scene.scrub_audio -> use_audio_scrub: boolean Play audio from Sequence Editor while scrubbing +Scene.sync_audio -> use_audio_sync: boolean Play back and sync with audio clock, dropping frames if frame display is too slow +Scene.use_gravity -> use_gravity: boolean Use global gravity for all dynamics +Scene.use_nodes -> use_nodes: boolean Enable the compositing node tree +Scene.use_preview_range -> use_preview_range: boolean Use an alternative start/end frame for UI playback, rather than the scene start/end frame +SceneGameData.activity_culling -> use_activity_culling: boolean Activity culling is enabled +SceneGameData.auto_start -> use_auto_start: boolean Automatically start game at load time +SceneGameData.fullscreen -> show_fullscreen: boolean Starts player in a new fullscreen display +SceneGameData.glsl_extra_textures -> use_glsl_extra_textures: boolean Use extra textures like normal or specular maps for GLSL rendering +SceneGameData.glsl_lights -> use_glsl_lights: boolean Use lights for GLSL rendering +SceneGameData.glsl_nodes -> use_glsl_nodes: boolean Use nodes for GLSL rendering +SceneGameData.glsl_ramps -> use_glsl_ramps: boolean Use ramps for GLSL rendering +SceneGameData.glsl_shaders -> use_glsl_shaders: boolean Use shaders for GLSL rendering +SceneGameData.glsl_shadows -> use_glsl_shadows: boolean Use shadows for GLSL rendering +SceneGameData.show_debug_properties -> show_debug_properties: boolean Show properties marked for debugging while the game runs +SceneGameData.show_framerate_profile -> show_framerate_profile: boolean Show framerate and profiling information while the game runs +SceneGameData.show_physics_visualization -> show_physics_visualization: boolean Show a visualization of physics bounds and interactions +SceneGameData.use_animation_record -> use_animation_record: boolean Record animation to fcurves +SceneGameData.use_deprecation_warnings -> use_deprecation_warnings: boolean Print warnings when using deprecated features in the python API +SceneGameData.use_display_lists -> use_display_lists: boolean Use display lists to speed up rendering by keeping geometry on the GPU +SceneGameData.use_frame_rate -> use_frame_rate: boolean Respect the frame rate rather than rendering as many frames as possible +SceneGameData.use_occlusion_culling -> use_occlusion_culling: boolean Use optimized Bullet DBVT tree for view frustum and occlusion culling +SceneRenderLayer.all_z -> use_all_z: boolean Fill in Z values for solid faces in invisible layers, for masking +SceneRenderLayer.edge -> use_edge_enhance: boolean Render Edge-enhance in this Layer (only works for Solid faces) +SceneRenderLayer.enabled -> use: boolean Disable or enable the render layer +SceneRenderLayer.halo -> use_halo: boolean Render Halos in this Layer (on top of Solid) +SceneRenderLayer.pass_ao -> use_pass_ambient_occlusion: boolean Deliver AO pass +SceneRenderLayer.pass_ao_exclude -> exclude_ambient_occlusion: boolean Exclude AO pass from combined +SceneRenderLayer.pass_color -> use_pass_color: boolean Deliver shade-less color pass +SceneRenderLayer.pass_combined -> use_pass_combined: boolean Deliver full combined RGBA buffer +SceneRenderLayer.pass_diffuse -> use_pass_diffuse: boolean Deliver diffuse pass +SceneRenderLayer.pass_emit -> use_pass_emit: boolean Deliver emission pass +SceneRenderLayer.pass_emit_exclude -> exclude_emit: boolean Exclude emission pass from combined +SceneRenderLayer.pass_environment -> use_pass_environment: boolean Deliver environment lighting pass +SceneRenderLayer.pass_environment_exclude -> exclude_environment: boolean Exclude environment pass from combined +SceneRenderLayer.pass_indirect -> use_pass_indirect: boolean Deliver indirect lighting pass +SceneRenderLayer.pass_indirect_exclude -> exclude_indirect: boolean Exclude indirect pass from combined +SceneRenderLayer.pass_mist -> use_pass_mist: boolean Deliver mist factor pass (0.0-1.0) +SceneRenderLayer.pass_normal -> use_pass_normal: boolean Deliver normal pass +SceneRenderLayer.pass_object_index -> use_pass_object_index: boolean Deliver object index pass +SceneRenderLayer.pass_reflection -> use_pass_reflection: boolean Deliver raytraced reflection pass +SceneRenderLayer.pass_reflection_exclude -> exclude_reflection: boolean Exclude raytraced reflection pass from combined +SceneRenderLayer.pass_refraction -> use_pass_refraction: boolean Deliver raytraced refraction pass +SceneRenderLayer.pass_refraction_exclude -> exclude_refraction: boolean Exclude raytraced refraction pass from combined +SceneRenderLayer.pass_shadow -> use_pass_shadow: boolean Deliver shadow pass +SceneRenderLayer.pass_shadow_exclude -> exclude_shadow: boolean Exclude shadow pass from combined +SceneRenderLayer.pass_specular -> use_pass_specular: boolean Deliver specular pass +SceneRenderLayer.pass_specular_exclude -> exclude_specular: boolean Exclude specular pass from combined +SceneRenderLayer.pass_uv -> use_pass_uv: boolean Deliver texture UV pass +SceneRenderLayer.pass_vector -> use_pass_vector: boolean Deliver speed vector pass +SceneRenderLayer.pass_z -> use_pass_z: boolean Deliver Z values pass +SceneRenderLayer.sky -> use_sky: boolean Render Sky in this Layer +SceneRenderLayer.solid -> use_solid: boolean Render Solid faces in this Layer +SceneRenderLayer.strand -> use_strand: boolean Render Strands in this Layer +SceneRenderLayer.visible_layers -> layer: boolean Scene layers included in this render layer +SceneRenderLayer.zmask -> use_zmask: boolean Only render what's in front of the solid z values +SceneRenderLayer.zmask_layers -> layer_zmask: boolean Zmask scene layers +SceneRenderLayer.zmask_negate -> invert_zmask: boolean For Zmask, only render what is behind solid z values instead of in front +SceneRenderLayer.ztransp -> use_ztransp: boolean Render Z-Transparent faces in this Layer (On top of Solid and Halos) +SceneSequence.convert_float -> use_float: boolean Convert input to float data +SceneSequence.de_interlace -> use_deinterlace: boolean For video movies to remove fields +SceneSequence.flip_x -> use_flip_x: boolean Flip on the X axis +SceneSequence.flip_y -> use_flip_y: boolean Flip on the Y axis +SceneSequence.premultiply -> use_premultiply: boolean Convert RGB from key alpha to premultiplied alpha +SceneSequence.proxy_custom_directory -> use_proxy_custom_directory: boolean Use a custom directory to store data +SceneSequence.proxy_custom_file -> use_proxy_custom_file: boolean Use a custom file to read proxy data from +SceneSequence.reverse_frames -> use_reverse_frames: boolean Reverse frame order +SceneSequence.use_color_balance -> use_color_balance: boolean (3-Way color correction) on input +SceneSequence.use_crop -> use_crop: boolean Crop image before processing +SceneSequence.use_proxy -> use_proxy: boolean Use a preview proxy for this strip +SceneSequence.use_translation -> use_translation: boolean Translate image before processing +Scopes.use_full_resolution -> use_full_resolution: boolean Sample every pixel of the image +Screen.animation_playing -> is_animation_playing: boolean, (read-only) Animation playback is active +Screen.fullscreen -> is_fullscreen: boolean, (read-only) An area is maximised, filling this screen +ScrewModifier.use_normal_calculate -> use_normal_calculate: boolean Calculate the order of edges (needed for meshes, but not curves) +ScrewModifier.use_normal_flip -> use_normal_flip: boolean Flip normals of lathed faces +ScrewModifier.use_object_screw_offset -> use_object_screw_offset: boolean Use the distance between the objects to make a screw +Sculpt.lock_x -> lock_x: boolean Disallow changes to the X axis of vertices +Sculpt.lock_y -> lock_y: boolean Disallow changes to the Y axis of vertices +Sculpt.lock_z -> lock_z: boolean Disallow changes to the Z axis of vertices +Sculpt.symmetry_x -> use_symmetry_x: boolean Mirror brush across the X axis +Sculpt.symmetry_y -> use_symmetry_y: boolean Mirror brush across the Y axis +Sculpt.symmetry_z -> use_symmetry_z: boolean Mirror brush across the Z axis +Sensor.expanded -> show_expanded: boolean Set sensor expanded in the user interface +Sensor.invert -> invert: boolean Invert the level(output) of this sensor +Sensor.level -> use_level: boolean Level detector, trigger controllers of new states (only applicable upon logic state transition) +Sensor.pulse_false_level -> use_pulse_false_level: boolean Activate FALSE level triggering (pulse mode) +Sensor.pulse_true_level -> use_pulse_true_level: boolean Activate TRUE level triggering (pulse mode) +Sensor.tap -> use_tap: boolean Trigger controllers only for an instant, even while the sensor remains true +Sequence.frame_locked -> use_frame_lock: boolean Lock the animation curve to the global frame counter +Sequence.left_handle_selected -> select_left_handle: boolean +Sequence.lock -> lock: boolean Lock strip so that it can't be transformed +Sequence.mute -> mute: boolean +Sequence.right_handle_selected -> select_right_handle: boolean +Sequence.selected -> select: boolean +Sequence.use_effect_default_fade -> use_default_fade: boolean Fade effect using the built-in default (usually make transition as long as effect strip) +SequenceColorBalance.inverse_gain -> invert_gain: boolean +SequenceColorBalance.inverse_gamma -> invert_gamma: boolean +SequenceColorBalance.inverse_lift -> invert_lift: boolean +ShaderNodeExtendedMaterial.diffuse -> use_diffuse: boolean Material Node outputs Diffuse +ShaderNodeExtendedMaterial.invert_normal -> invert_normal: boolean Material Node uses inverted normal +ShaderNodeExtendedMaterial.specular -> use_specular: boolean Material Node outputs Specular +ShaderNodeMapping.clamp_maximum -> use_max: boolean Clamp the output coordinate to a maximum value +ShaderNodeMapping.clamp_minimum -> use_min: boolean Clamp the output coordinate to a minimum value +ShaderNodeMaterial.diffuse -> use_diffuse: boolean Material Node outputs Diffuse +ShaderNodeMaterial.invert_normal -> invert_normal: boolean Material Node uses inverted normal +ShaderNodeMaterial.specular -> use_specular: boolean Material Node outputs Specular +ShaderNodeMixRGB.alpha -> use_alpha: boolean Include alpha of second input in this operation +ShapeActionActuator.continue_last_frame -> use_continue_last_frame: boolean Restore last frame when switching on/off, otherwise play from the start each time +ShapeKey.mute -> mute: boolean Mute this shape key +ShrinkwrapModifier.cull_back_faces -> use_cull_back_faces: boolean Stop vertices from projecting to a back face on the target +ShrinkwrapModifier.cull_front_faces -> use_cull_front_faces: boolean Stop vertices from projecting to a front face on the target +ShrinkwrapModifier.keep_above_surface -> use_keep_above_surface: boolean +ShrinkwrapModifier.negative -> use_negative_direction: boolean Allow vertices to move in the negative direction of axis +ShrinkwrapModifier.positive -> use_positive_direction: boolean Allow vertices to move in the positive direction of axis +ShrinkwrapModifier.x -> use_project_x: boolean +ShrinkwrapModifier.y -> use_project_y: boolean +ShrinkwrapModifier.z -> use_project_z: boolean +SimpleDeformModifier.lock_x_axis -> lock_x: boolean +SimpleDeformModifier.lock_y_axis -> lock_y: boolean +SimpleDeformModifier.relative -> use_relative: boolean Sets the origin of deform space to be relative to the object +SmokeDomainSettings.dissolve_smoke -> use_dissolve_smoke: boolean Enable smoke to disappear over time +SmokeDomainSettings.dissolve_smoke_log -> use_dissolve_smoke_log: boolean Using 1/x +SmokeDomainSettings.highres -> use_high_resolution: boolean Enable high resolution (using amplification) +SmokeDomainSettings.initial_velocity -> use_initial_velocity: boolean Smoke inherits it's velocity from the emitter particle +SmokeDomainSettings.viewhighres -> show_high_resolution: boolean Show high resolution (using amplification) +NEGATE * SmokeFlowSettings.outflow -> use_outflow: boolean Deletes smoke from simulation +SmoothModifier.x -> use_x: boolean +SmoothModifier.y -> use_y: boolean +SmoothModifier.z -> use_z: boolean +SoftBodySettings.auto_step -> use_auto_step: boolean Use velocities for automagic step sizes +SoftBodySettings.diagnose -> use_diagnose: boolean Turn on SB diagnose console prints +SoftBodySettings.edge_collision -> use_edge_collision: boolean Edges collide too +SoftBodySettings.estimate_matrix -> use_estimate_matrix: boolean estimate matrix .. split to COM , ROT ,SCALE +SoftBodySettings.face_collision -> use_face_collision: boolean Faces collide too, SLOOOOOW warning +SoftBodySettings.new_aero -> use_new_aero: boolean New aero(uses angle and length) +SoftBodySettings.self_collision -> use_self_collision: boolean Enable naive vertex ball self collision +SoftBodySettings.stiff_quads -> use_stiff_quads: boolean Adds diagonal springs on 4-gons +SoftBodySettings.use_edges -> use_edges: boolean Use Edges as springs +SoftBodySettings.use_goal -> use_goal: boolean Define forces for vertices to stick to animated position +SolidifyModifier.invert -> invert_vertex_group: boolean Invert the vertex group influence +SolidifyModifier.use_even_offset -> use_even_offset: boolean Maintain thickness by adjusting for sharp corners (slow, disable when not needed) +SolidifyModifier.use_quality_normals -> use_quality_normals: boolean Calculate normals which result in more even thickness (slow, disable when not needed) +SolidifyModifier.use_rim -> use_rim: boolean Create edge loops between the inner and outer surfaces on face edges (slow, disable when not needed) +SolidifyModifier.use_rim_material -> use_rim_material: boolean Use in the next material for rim faces +Sound.caching -> use_ram_cache: boolean The sound file is decoded and loaded into RAM +SoundActuator.enable_sound_3d -> use_3d_sound: boolean Enable/Disable 3D Sound +SpaceConsole.show_report_debug -> show_report_debug: boolean Display debug reporting info +SpaceConsole.show_report_error -> show_report_error: boolean Display error text +SpaceConsole.show_report_info -> show_report_info: boolean Display general information +SpaceConsole.show_report_operator -> show_report_operator: boolean Display the operator log +SpaceConsole.show_report_warn -> show_report_warning: boolean Display warnings +SpaceDopeSheetEditor.automerge_keyframes -> use_automerge_keyframes: boolean Automatically merge nearby keyframes +SpaceDopeSheetEditor.realtime_updates -> use_realtime_updates: boolean When transforming keyframes, changes to the animation data are flushed to other views +SpaceDopeSheetEditor.show_cframe_indicator -> show_frame_indicator: boolean Show frame number beside the current frame indicator line +SpaceDopeSheetEditor.show_seconds -> show_seconds: boolean, (read-only) Show timing in seconds not frames +SpaceDopeSheetEditor.show_sliders -> show_sliders: boolean Show sliders beside F-Curve channels +SpaceDopeSheetEditor.use_marker_sync -> use_marker_sync: boolean Sync Markers with keyframe edits +SpaceGraphEditor.automerge_keyframes -> use_automerge_keyframes: boolean Automatically merge nearby keyframes +SpaceGraphEditor.has_ghost_curves -> has_ghost_curves: boolean Graph Editor instance has some ghost curves stored +SpaceGraphEditor.only_selected_curves_handles -> use_only_selected_curves_handles: boolean Only keyframes of selected F-Curves are visible and editable +SpaceGraphEditor.only_selected_keyframe_handles -> use_only_selected_keyframe_handles: boolean Only show and edit handles of selected keyframes +SpaceGraphEditor.realtime_updates -> use_realtime_updates: boolean When transforming keyframes, changes to the animation data are flushed to other views +SpaceGraphEditor.show_cframe_indicator -> show_frame_indicator: boolean Show frame number beside the current frame indicator line +SpaceGraphEditor.show_cursor -> show_cursor: boolean Show 2D cursor +SpaceGraphEditor.show_handles -> show_handles: boolean Show handles of Bezier control points +SpaceGraphEditor.show_seconds -> show_seconds: boolean, (read-only) Show timing in seconds not frames +SpaceGraphEditor.show_sliders -> show_sliders: boolean Show sliders beside F-Curve channels +SpaceImageEditor.draw_repeated -> show_repeated: boolean Draw the image repeated outside of the main view +SpaceImageEditor.image_painting -> use_image_paint: boolean Enable image painting mode +SpaceImageEditor.image_pin -> use_image_pin: boolean Display current image regardless of object selection +SpaceImageEditor.show_paint -> show_paint: boolean, (read-only) Show paint related properties +SpaceImageEditor.show_render -> show_render: boolean, (read-only) Show render related properties +SpaceImageEditor.show_uvedit -> show_uvedit: boolean, (read-only) Show UV editing related properties +SpaceImageEditor.update_automatically -> use_realtime_updates: boolean Update other affected window spaces automatically to reflect changes during interactive operations such as transform +SpaceImageEditor.use_grease_pencil -> use_grease_pencil: boolean Display and edit the grease pencil freehand annotations overlay +SpaceLogicEditor.actuators_show_active_objects -> show_actuators_active_objects: boolean Show actuators of active object +SpaceLogicEditor.actuators_show_active_states -> show_actuators_active_states: boolean Show only actuators connected to active states +SpaceLogicEditor.actuators_show_linked_controller -> show_actuators_linked_controller: boolean Show linked objects to the actuator +SpaceLogicEditor.actuators_show_selected_objects -> show_actuators_selected_objects: boolean Show actuators of all selected objects +SpaceLogicEditor.controllers_show_active_objects -> show_controllers_active_objects: boolean Show controllers of active object +SpaceLogicEditor.controllers_show_linked_controller -> show_controllers_linked_controller: boolean Show linked objects to sensor/actuator +SpaceLogicEditor.controllers_show_selected_objects -> show_controllers_selected_objects: boolean Show controllers of all selected objects +SpaceLogicEditor.sensors_show_active_objects -> show_sensors_active_objects: boolean Show sensors of active object +SpaceLogicEditor.sensors_show_active_states -> show_sensors_active_states: boolean Show only sensors connected to active states +SpaceLogicEditor.sensors_show_linked_controller -> show_sensors_linked_controller: boolean Show linked objects to the controller +SpaceLogicEditor.sensors_show_selected_objects -> show_sensors_selected_objects: boolean Show sensors of all selected objects +SpaceNLA.realtime_updates -> use_realtime_updates: boolean When transforming strips, changes to the animation data are flushed to other views +SpaceNLA.show_cframe_indicator -> show_frame_indicator: boolean Show frame number beside the current frame indicator line +SpaceNLA.show_seconds -> show_seconds: boolean, (read-only) Show timing in seconds not frames +SpaceNLA.show_strip_curves -> show_strip_curves: boolean Show influence curves on strips +SpaceNodeEditor.backdrop -> show_backdrop: boolean Use active Viewer Node output as backdrop for compositing nodes +SpaceOutliner.match_case_sensitive -> use_match_case_sensitive: boolean Only use case sensitive matches of search string +SpaceOutliner.match_complete -> use_match_complete: boolean Only use complete matches of search string +SpaceOutliner.show_restriction_columns -> show_restriction_columns: boolean Show column +SpaceProperties.brush_texture -> show_brush_texture: boolean Show brush textures +SpaceProperties.use_pin_id -> use_pin_id: boolean Use the pinned context +SpaceSequenceEditor.draw_frames -> show_frames: boolean Draw frames rather than seconds +SpaceSequenceEditor.draw_safe_margin -> show_safe_margin: boolean Draw title safe margins in preview +SpaceSequenceEditor.separate_color_preview -> show_separate_color: boolean Separate color channels in preview +SpaceSequenceEditor.show_cframe_indicator -> show_frame_indicator: boolean Show frame number beside the current frame indicator line +SpaceSequenceEditor.use_grease_pencil -> use_grease_pencil: boolean Display and edit the grease pencil freehand annotations overlay +SpaceSequenceEditor.use_marker_sync -> use_marker_sync: boolean Transform markers as well as strips +SpaceTextEditor.find_all -> use_find_all: boolean Search in all text datablocks, instead of only the active one +SpaceTextEditor.find_wrap -> use_find_wrap: boolean Search again from the start of the file when reaching the end +SpaceTextEditor.line_numbers -> show_line_numbers: boolean Show line numbers next to the text +SpaceTextEditor.live_edit -> use_live_edit: boolean Run python while editing +SpaceTextEditor.overwrite -> use_overwrite: boolean Overwrite characters when typing rather than inserting them +SpaceTextEditor.syntax_highlight -> show_syntax_highlight: boolean Syntax highlight for scripting +SpaceTextEditor.word_wrap -> use_word_wrap: boolean Wrap words if there is not enough horizontal space +SpaceTimeline.only_selected -> show_only_selected: boolean Show keyframes for active Object and/or its selected channels only +SpaceTimeline.play_all_3d -> use_play_3d_editors: boolean +SpaceTimeline.play_anim -> use_play_animation_editors: boolean +SpaceTimeline.play_buttons -> use_play_properties_editors: boolean +SpaceTimeline.play_image -> use_play_image_editors: boolean +SpaceTimeline.play_nodes -> use_play_node_editors: boolean +SpaceTimeline.play_sequencer -> use_play_sequence_editors: boolean +SpaceTimeline.play_top_left -> use_play_top_left_3d_editor: boolean +SpaceTimeline.show_cframe_indicator -> show_frame_indicator: boolean Show frame number beside the current frame indicator line +SpaceUVEditor.constrain_to_image_bounds -> use_constrain_to_image_bounds: boolean Constraint to stay within the image bounds while editing +SpaceUVEditor.draw_modified_edges -> show_modified_edges: boolean Draw edges after modifiers are applied +SpaceUVEditor.draw_other_objects -> show_other_objects: boolean Draw other selected objects that share the same image +SpaceUVEditor.draw_smooth_edges -> show_smooth_edges: boolean Draw UV edges anti-aliased +SpaceUVEditor.draw_stretch -> show_stretch: boolean Draw faces colored according to the difference in shape between UVs and their 3D coordinates (blue for low distortion, red for high distortion) +SpaceUVEditor.live_unwrap -> use_live_unwrap: boolean Continuously unwrap the selected UV island while transforming pinned vertices +SpaceUVEditor.normalized_coordinates -> show_normalized_coordinates: boolean Display UV coordinates from 0.0 to 1.0 rather than in pixels +SpaceUVEditor.snap_to_pixels -> use_snap_to_pixels: boolean Snap UVs to pixel locations while editing +SpaceView3D.all_object_origins -> show_all_objects_origin: boolean Show the object origin center dot for all (selected and unselected) objects +SpaceView3D.display_background_images -> show_background_images: boolean Display reference images behind objects in the 3D View +SpaceView3D.display_floor -> show_floor: boolean Show the ground plane grid in perspective view +SpaceView3D.display_render_override -> show_only_render: boolean Display only objects which will be rendered +SpaceView3D.display_x_axis -> show_axis_x: boolean Show the X axis line in perspective view +SpaceView3D.display_y_axis -> show_axis_y: boolean Show the Y axis line in perspective view +SpaceView3D.display_z_axis -> show_axis_z: boolean Show the Z axis line in perspective view +SpaceView3D.layers -> layer: boolean Layers visible in this 3D View +SpaceView3D.lock_camera_and_layers -> lock_camera_and_layers: boolean Use the scene's active camera and layers in this view, rather than local layers +SpaceView3D.manipulator -> use_manipulator: boolean Use a 3D manipulator widget for controlling transforms +SpaceView3D.manipulator_rotate -> use_manipulator_rotate: boolean Use the manipulator for rotation transformations +SpaceView3D.manipulator_scale -> use_manipulator_scale: boolean Use the manipulator for scale transformations +SpaceView3D.manipulator_translate -> use_manipulator_translate: boolean Use the manipulator for movement transformations +SpaceView3D.occlude_geometry -> use_occlude_geometry: boolean Limit selection to visible (clipped with depth buffer) +SpaceView3D.outline_selected -> show_outline_selected: boolean Show an outline highlight around selected objects in non-wireframe views +SpaceView3D.pivot_point_align -> use_pivot_point_align: boolean Manipulate object centers only +SpaceView3D.relationship_lines -> show_relationship_lines: boolean Show dashed lines indicating parent or constraint relationships +SpaceView3D.textured_solid -> show_textured_solid: boolean Display face-assigned textures in solid view +SpaceView3D.used_layers -> layer_used: boolean, (read-only) Layers that contain something +SpeedControlSequence.curve_compress_y -> use_curve_compress_y: boolean Scale F-Curve value to get the target frame number, F-Curve value runs from 0.0 to 1.0 +SpeedControlSequence.curve_velocity -> use_curve_velocity: boolean Interpret the F-Curve value as a velocity instead of a frame number +SpeedControlSequence.frame_blending -> use_frame_blend: boolean Blend two frames into the target for a smoother result +Spline.bezier_u -> use_bezier_u: boolean Make this nurbs curve or surface act like a bezier spline in the U direction (Order U must be 3 or 4, Cyclic U must be disabled) +Spline.bezier_v -> use_bezier_v: boolean Make this nurbs surface act like a bezier spline in the V direction (Order V must be 3 or 4, Cyclic V must be disabled) +Spline.cyclic_u -> use_cyclic_u: boolean Make this curve or surface a closed loop in the U direction +Spline.cyclic_v -> use_cyclic_v: boolean Make this surface a closed loop in the V direction +Spline.endpoint_u -> use_endpoint_u: boolean Make this nurbs curve or surface meet the endpoints in the U direction (Cyclic U must be disabled) +Spline.endpoint_v -> use_endpoint_v: boolean Make this nurbs surface meet the endpoints in the V direction (Cyclic V must be disabled) +Spline.hide -> hide: boolean Hide this curve in editmode +Spline.smooth -> use_smooth: boolean Smooth the normals of the surface or beveled curve +SplineIKConstraint.chain_offset -> use_chain_offset: boolean Offset the entire chain relative to the root joint +SplineIKConstraint.even_divisions -> use_even_divisions: boolean Ignore the relative lengths of the bones when fitting to the curve +SplineIKConstraint.use_curve_radius -> use_curve_radius: boolean Average radius of the endpoints is used to tweak the X and Z Scaling of the bones, on top of XZ Scale mode +SplineIKConstraint.y_stretch -> use_y_stretch: boolean Stretch the Y axis of the bones to fit the curve +SplinePoint.hidden -> hide: boolean Visibility status +SplinePoint.selected -> select_control_point: boolean Selection status +SpotLamp.auto_clip_end -> use_auto_clip_end: boolean Automatic calculation of clipping-end, based on visible vertices +SpotLamp.auto_clip_start -> use_auto_clip_start: boolean Automatic calculation of clipping-start, based on visible vertices +SpotLamp.halo -> use_halo: boolean Renders spotlight with a volumetric halo (Buffer Shadows) +SpotLamp.only_shadow -> use_only_shadow: boolean Causes light to cast shadows only without illuminating objects +SpotLamp.shadow_layer -> use_shadow_layer: boolean Causes only objects on the same layer to cast shadows +SpotLamp.show_cone -> show_cone: boolean Draw transparent cone in 3D view to visualize which objects are contained in it +SpotLamp.sphere -> use_sphere: boolean Sets light intensity to zero beyond lamp distance +SpotLamp.square -> use_square: boolean Casts a square spot light shape +StateActuator.state -> state: boolean +SubsurfModifier.optimal_display -> show_only_control_edges: boolean Skip drawing/rendering of interior subdivided edges +SubsurfModifier.subsurf_uv -> use_subsurf_uv: boolean Use subsurf to subdivide UVs +SunLamp.only_shadow -> use_only_shadow: boolean Causes light to cast shadows only without illuminating objects +SunLamp.shadow_layer -> use_shadow_layer: boolean Causes only objects on the same layer to cast shadows +SurfaceCurve.map_along_length -> use_map_along_length: boolean Generate texture mapping coordinates following the curve direction, rather than the local bounding box +SurfaceCurve.vertex_normal_flip -> use_vertex_normal_flip: boolean Flip vertex normals towards the camera during render +TexMapping.has_maximum -> use_max: boolean Whether to use maximum clipping value +TexMapping.has_minimum -> use_min: boolean Whether to use minimum clipping value +Text.dirty -> is_dirty: boolean, (read-only) Text file has been edited since last save +Text.memory -> is_in_memory: boolean, (read-only) Text file is in memory, without a corresponding file on disk +Text.modified -> is_modified: boolean, (read-only) Text file on disk is different than the one in memory +Text.tabs_as_spaces -> use_tabs_as_spaces: boolean Automatically converts all new tabs into spaces +Text.use_module -> use_module: boolean Register this text as a module on loading, Text name must end with '.py' +TextCharacterFormat.bold -> use_bold: boolean +TextCharacterFormat.italic -> use_italic: boolean +TextCharacterFormat.style -> use_style: boolean +TextCharacterFormat.underline -> use_underline: boolean +TextCharacterFormat.wrap -> use_wrap: boolean +TextCurve.fast -> use_fast_editing: boolean Don't fill polygons while editing +TextCurve.map_along_length -> use_map_along_length: boolean Generate texture mapping coordinates following the curve direction, rather than the local bounding box +TextCurve.vertex_normal_flip -> use_vertex_normal_flip: boolean Flip vertex normals towards the camera during render +TextMarker.edit_all -> use_edit_all: boolean, (read-only) Edit all markers of the same group as one +TextMarker.temporary -> is_temporary: boolean, (read-only) Marker is temporary +Texture.use_color_ramp -> use_color_ramp: boolean Toggle color ramp operations +Texture.use_nodes -> use_nodes: boolean Make this a node-based texture +Texture.use_preview_alpha -> use_preview_alpha: boolean Show Alpha in Preview Render +TextureNodeMixRGB.alpha -> use_alpha: boolean Include alpha of second input in this operation +TextureSlot.negate -> invert: boolean Inverts the values of the texture to reverse its effect +TextureSlot.rgb_to_intensity -> use_rgb_to_intensity: boolean Converts texture RGB values to intensity (gray) values +TextureSlot.stencil -> use_stencil: boolean Use this texture as a blending value on the next texture +ThemeBoneColorSet.colored_constraints -> show_colored_constraints: boolean Allow the use of colors indicating constraints/keyed status +ThemeWidgetColors.shaded -> show_shaded: boolean +TimelineMarker.selected -> select: boolean Marker selection state +ToolSettings.auto_normalize -> use_auto_normalize: boolean Ensure all bone-deforming vertex groups add up to 1.0 while weight painting +ToolSettings.automerge_editing -> use_automerge_editing: boolean Automatically merge vertices moved to the same location +ToolSettings.bone_sketching -> use_bone_sketching: boolean DOC BROKEN +ToolSettings.etch_autoname -> use_etch_autoname: boolean DOC BROKEN +ToolSettings.etch_overdraw -> use_etch_overdraw: boolean DOC BROKEN +ToolSettings.etch_quick -> use_etch_quick: boolean DOC BROKEN +ToolSettings.mesh_selection_mode -> mesh_selection_mode: boolean Which mesh elements selection works on +ToolSettings.record_with_nla -> use_record_with_nla: boolean Add a new NLA Track + Strip for every loop/pass made over the animation to allow non-destructive tweaking +ToolSettings.snap -> use_snap: boolean Snap during transform +ToolSettings.snap_align_rotation -> use_snap_align_rotation: boolean Align rotation with the snapping target +ToolSettings.snap_peel_object -> use_snap_peel_object: boolean Consider objects as whole when finding volume center +ToolSettings.snap_project -> use_snap_project: boolean Project vertices on the surface of other objects +ToolSettings.use_auto_keying -> use_keyframe_insert_auto: boolean Automatic keyframe insertion for Objects and Bones +ToolSettings.uv_local_view -> show_local_view: boolean Draw only faces with the currently displayed image assigned +ToolSettings.uv_sync_selection -> use_uv_sync_selection: boolean Keep UV and edit mode mesh selection in sync +TrackToConstraint.target_z -> use_target_z: boolean Target's Z axis, not World Z axis, will constraint the Up direction +TransformConstraint.extrapolate_motion -> use_motion_extrapolate: boolean Extrapolate ranges +TransformSequence.uniform_scale -> use_uniform_scale: boolean Scale uniformly, preserving aspect ratio +UILayout.active -> show_active: boolean +UILayout.enabled -> show_enabled: boolean +UVProjectModifier.override_image -> use_image_override: boolean Override faces' current images with the given image +UnitSettings.use_separate -> use_separate: boolean Display units in pairs +UserPreferencesEdit.auto_keyframe_insert_available -> use_keyframe_insert_available: boolean Automatic keyframe insertion in available curves +UserPreferencesEdit.auto_keyframe_insert_keyingset -> use_keyframe_insert_keyingset: boolean Automatic keyframe insertion using active Keying Set +UserPreferencesEdit.drag_immediately -> use_drag_immediately: boolean Moving things with a mouse drag confirms when releasing the button +UserPreferencesEdit.duplicate_action -> use_duplicate_action: boolean Causes actions to be duplicated with the object +UserPreferencesEdit.duplicate_armature -> use_duplicate_armature: boolean Causes armature data to be duplicated with the object +UserPreferencesEdit.duplicate_curve -> use_duplicate_curve: boolean Causes curve data to be duplicated with the object +UserPreferencesEdit.duplicate_fcurve -> use_duplicate_fcurve: boolean Causes F-curve data to be duplicated with the object +UserPreferencesEdit.duplicate_lamp -> use_duplicate_lamp: boolean Causes lamp data to be duplicated with the object +UserPreferencesEdit.duplicate_material -> use_duplicate_material: boolean Causes material data to be duplicated with the object +UserPreferencesEdit.duplicate_mesh -> use_duplicate_mesh: boolean Causes mesh data to be duplicated with the object +UserPreferencesEdit.duplicate_metaball -> use_duplicate_metaball: boolean Causes metaball data to be duplicated with the object +UserPreferencesEdit.duplicate_particle -> use_duplicate_particle: boolean Causes particle systems to be duplicated with the object +UserPreferencesEdit.duplicate_surface -> use_duplicate_surface: boolean Causes surface data to be duplicated with the object +UserPreferencesEdit.duplicate_text -> use_duplicate_text: boolean Causes text data to be duplicated with the object +UserPreferencesEdit.duplicate_texture -> use_duplicate_texture: boolean Causes texture data to be duplicated with the object +UserPreferencesEdit.enter_edit_mode -> use_enter_edit_mode: boolean Enter Edit Mode automatically after adding a new object +UserPreferencesEdit.global_undo -> use_global_undo: boolean Global undo works by keeping a full copy of the file itself in memory, so takes extra memory +UserPreferencesEdit.grease_pencil_simplify_stroke -> use_grease_pencil_simplify_stroke: boolean Simplify the final stroke +UserPreferencesEdit.grease_pencil_smooth_stroke -> use_grease_pencil_smooth_stroke: boolean Smooth the final stroke +UserPreferencesEdit.insertkey_xyz_to_rgb -> use_insertkey_xyz_to_rgb: boolean Color for newly added transformation F-Curves (Location, Rotation, Scale) and also Color is based on the transform axis +UserPreferencesEdit.keyframe_insert_needed -> use_keyframe_insert_needed: boolean Keyframe insertion only when keyframe needed +UserPreferencesEdit.use_auto_keying -> use_auto_keying: boolean Automatic keyframe insertion for Objects and Bones +UserPreferencesEdit.use_negative_frames -> use_negative_frames: boolean Current frame number can be manually set to a negative value +UserPreferencesEdit.use_visual_keying -> use_visual_keying: boolean Use Visual keying automatically for constrained objects +UserPreferencesFilePaths.auto_save_temporary_files -> use_auto_save_temporary_files: boolean Automatic saving of temporary files +UserPreferencesFilePaths.compress_file -> use_file_compression: boolean Enable file compression when saving .blend files +UserPreferencesFilePaths.filter_file_extensions -> use_filter_files: boolean Display only files with extensions in the image select window +UserPreferencesFilePaths.hide_dot_files_datablocks -> show_hidden_files_datablocks: boolean Hide files/datablocks that start with a dot(.*) +UserPreferencesFilePaths.load_ui -> use_load_ui: boolean Load user interface setup when loading .blend files +UserPreferencesFilePaths.save_preview_images -> use_save_preview_images: boolean Enables automatic saving of preview images in the .blend file +UserPreferencesFilePaths.use_relative_paths -> use_relative_paths: boolean Default relative path option for the file selector +UserPreferencesInput.continuous_mouse -> use_continuous_mouse: boolean Allow moving the mouse outside the view on some manipulations (transform, ui control drag) +UserPreferencesInput.emulate_3_button_mouse -> use_emulate_3_button_mouse: boolean Emulates Middle Mouse with Alt+LeftMouse (doesn't work with Left Mouse Select option) +UserPreferencesInput.emulate_numpad -> use_emulate_numpad: boolean Causes the 1 to 0 keys to act as the numpad (useful for laptops) +UserPreferencesInput.invert_zoom_direction -> invert_zoom_direction: boolean Invert the axis of mouse movement for zooming +UserPreferencesSystem.auto_execute_scripts -> use_scripts_auto_execute: boolean Allow any .blend file to run scripts automatically (unsafe with blend files from an untrusted source) +UserPreferencesSystem.enable_all_codecs -> use_preview_images: boolean Enables automatic saving of preview images in the .blend file (Windows only) +UserPreferencesSystem.international_fonts -> use_international_fonts: boolean Use international fonts +UserPreferencesSystem.tabs_as_spaces -> use_tabs_as_spaces: boolean Automatically converts all new tabs into spaces for new and loaded text files +UserPreferencesSystem.translate_buttons -> use_translate_buttons: boolean Translate button labels +UserPreferencesSystem.translate_toolbox -> use_translate_toolbox: boolean Translate toolbox menu +UserPreferencesSystem.translate_tooltips -> use_translate_tooltips: boolean Translate Tooltips +UserPreferencesSystem.use_antialiasing -> use_antialiasing: boolean Use anti-aliasing for the 3D view (may impact redraw performance) +UserPreferencesSystem.use_mipmaps -> use_mipmaps: boolean Scale textures for the 3D View (looks nicer but uses more memory and slows image reloading) +UserPreferencesSystem.use_textured_fonts -> use_textured_fonts: boolean Use textures for drawing international fonts +UserPreferencesSystem.use_vbos -> use_vertex_buffer_objects: boolean Use Vertex Buffer Objects (or Vertex Arrays, if unsupported) for viewport rendering +UserPreferencesSystem.use_weight_color_range -> use_weight_color_range: boolean Enable color range used for weight visualization in weight painting mode +UserPreferencesView.auto_depth -> use_mouse_auto_depth: boolean Use the depth under the mouse to improve view pan/rotate/zoom functionality +UserPreferencesView.auto_perspective -> use_auto_perspective: boolean Automatically switch between orthographic and perspective when changing from top/front/side views +UserPreferencesView.directional_menus -> use_directional_menus: boolean Otherwise menus, etc will always be top to bottom, left to right, no matter opening direction +UserPreferencesView.display_object_info -> show_object_info: boolean Display objects name and frame number in 3D view +UserPreferencesView.global_pivot -> use_global_pivot: boolean Lock the same rotation/scaling pivot in all 3D Views +UserPreferencesView.global_scene -> use_global_scene: boolean Forces the current Scene to be displayed in all Screens +UserPreferencesView.open_mouse_over -> use_mouse_over_open: boolean Open menu buttons and pulldowns automatically when the mouse is hovering +UserPreferencesView.rotate_around_selection -> use_rotate_around_selection: boolean Use selection as the pivot point +UserPreferencesView.show_mini_axis -> show_mini_axis: boolean Show a small rotating 3D axis in the bottom left corner of the 3D View +UserPreferencesView.show_playback_fps -> show_playback_fps: boolean Show the frames per second screen refresh rate, while animation is played back +UserPreferencesView.show_splash -> show_splash: boolean Display splash screen on startup +UserPreferencesView.show_view_name -> show_view_name: boolean Show the name of the view's direction in each 3D View +UserPreferencesView.tooltips -> show_tooltips: boolean Display tooltips +UserPreferencesView.use_column_layout -> show_column_layout: boolean Use a column layout for toolbox +UserPreferencesView.use_large_cursors -> show_large_cursors: boolean Use large mouse cursors when available +UserPreferencesView.use_manipulator -> show_manipulator: boolean Use 3D transform manipulator +UserPreferencesView.use_middle_mouse_paste -> use_mouse_mmb_paste: boolean In text window, paste with middle mouse button instead of panning +UserPreferencesView.wheel_invert_zoom -> invert_mouse_wheel_zoom: boolean Swap the Mouse Wheel zoom direction +UserPreferencesView.zoom_to_mouse -> use_zoom_to_mouse: boolean Zoom in towards the mouse pointer's position in the 3D view, rather than the 2D window center +UserSolidLight.enabled -> use: boolean Enable this OpenGL light in solid draw mode +VertexPaint.all_faces -> use_all_faces: boolean Paint on all faces inside brush +VertexPaint.normals -> use_normal: boolean Applies the vertex normal before painting +VertexPaint.spray -> use_spray: boolean Keep applying paint effect while holding mouse +VisibilityActuator.children -> apply_to_children: boolean Set all the children of this object to the same visibility/occlusion recursively +VisibilityActuator.occlusion -> use_occlusion: boolean Set the object to occlude objects behind it. Initialized from the object type in physics button +VisibilityActuator.visible -> use_visible: boolean Set the objects visible. Initialized from the objects render restriction toggle (access in the outliner) +VoxelData.still -> use_still_frame: boolean Always render a still frame from the voxel data sequence +WaveModifier.cyclic -> use_cyclic: boolean Cyclic wave effect +WaveModifier.normals -> use_normal: boolean Displace along normal +WaveModifier.x -> use_x: boolean X axis motion +WaveModifier.x_normal -> use_normal_x: boolean Enable displacement along the X normal +WaveModifier.y -> use_y: boolean Y axis motion +WaveModifier.y_normal -> use_normal_y: boolean Enable displacement along the Y normal +WaveModifier.z_normal -> use_normal_z: boolean Enable displacement along the Z normal +World.blend_sky -> use_sky_blend: boolean Render background with natural progression from horizon to zenith +World.paper_sky -> use_sky_paper: boolean Flatten blend or texture coordinates +World.real_sky -> use_sky_real: boolean Render background with a real horizon, relative to the camera angle +WorldLighting.falloff -> use_falloff: boolean +WorldLighting.pixel_cache -> use_cache: boolean Cache AO results in pixels and interpolate over neighbouring pixels for speedup (for Approximate) +WorldLighting.use_ambient_occlusion -> use_ambient_occlusian: boolean Use Ambient Occlusion to add shadowing based on distance between objects +WorldLighting.use_environment_lighting -> use_environment_lighting: boolean Add light coming from the environment +WorldLighting.use_indirect_lighting -> use_indirect_lighting: boolean Add indirect light bouncing of surrounding objects +WorldMistSettings.use_mist -> use_mist: boolean Occlude objects with the environment color as they are further away +WorldStarsSettings.use_stars -> use_stars: boolean Enable starfield generation +WorldTextureSlot.map_blend -> use_map_blend: boolean Affect the color progression of the background +WorldTextureSlot.map_horizon -> use_map_horizon: boolean Affect the color of the horizon +WorldTextureSlot.map_zenith_down -> use_map_zenith_down: boolean Affect the color of the zenith below +WorldTextureSlot.map_zenith_up -> use_map_zenith_up: boolean Affect the color of the zenith above |