diff options
Diffstat (limited to 'source/blender/modifiers/intern/MOD_screw.c')
-rw-r--r-- | source/blender/modifiers/intern/MOD_screw.c | 880 |
1 files changed, 880 insertions, 0 deletions
diff --git a/source/blender/modifiers/intern/MOD_screw.c b/source/blender/modifiers/intern/MOD_screw.c new file mode 100644 index 00000000000..16990c2522b --- /dev/null +++ b/source/blender/modifiers/intern/MOD_screw.c @@ -0,0 +1,880 @@ +/* +* $Id$ +* +* ***** BEGIN GPL LICENSE BLOCK ***** +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software Foundation, +* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +* +* The Original Code is Copyright (C) 2005 by the Blender Foundation. +* All rights reserved. +* +* Contributor(s): Daniel Dunbar +* Ton Roosendaal, +* Ben Batt, +* Brecht Van Lommel, +* Campbell Barton +* +* ***** END GPL LICENSE BLOCK ***** +* +*/ + +/* Screw modifier: revolves the edges about an axis */ + +#include "DNA_meshdata_types.h" + +#include "BLI_math.h" + +#include "BKE_cdderivedmesh.h" + +#include "depsgraph_private.h" +#include "MOD_modifiertypes.h" +#include "MEM_guardedalloc.h" + +/* used for gathering edge connectivity */ +typedef struct ScrewVertConnect { + float dist; /* distance from the center axis */ + float co[3]; /* loaction relative to the transformed axis */ + float no[3]; /* calc normal of the vertex */ + int v[2]; /* 2 verts on either side of this one */ + MEdge *e[2]; /* edges on either side, a bit of a waste since each edge ref's 2 edges */ + char flag; +} ScrewVertConnect; + +typedef struct ScrewVertIter { + ScrewVertConnect * v_array; + ScrewVertConnect * v_poin; + int v; + int v_other; + MEdge *e; +} ScrewVertIter; + +#define ScrewVertIter_INIT(iter, array, v_init, dir)\ + iter.v_array = array;\ + iter.v = v_init;\ + if (v_init>=0) {\ + iter.v_poin = &array[v_init];\ + iter.v_other = iter.v_poin->v[dir];\ + if (dir)\ + iter.e = iter.v_poin->e[0];\ + else\ + iter.e = iter.v_poin->e[1];\ + } else {\ + iter.v_poin= NULL;\ + iter.e= NULL;\ + } + + +#define ScrewVertIter_NEXT(iter)\ + if (iter.v_poin->v[0] == iter.v_other) {\ + iter.v_other= iter.v;\ + iter.v= iter.v_poin->v[1];\ + } else if (iter.v_poin->v[1] == iter.v_other) {\ + iter.v_other= iter.v;\ + iter.v= iter.v_poin->v[0];\ + }\ + if (iter.v >=0) {\ + iter.v_poin= &iter.v_array[iter.v];\ + if ( iter.v_poin->e[0] != iter.e ) iter.e= iter.v_poin->e[0];\ + else iter.e= iter.v_poin->e[1];\ + } else {\ + iter.e= NULL;\ + iter.v_poin= NULL;\ + } + +static void initData(ModifierData *md) +{ + ScrewModifierData *ltmd= (ScrewModifierData*) md; + ltmd->ob_axis= NULL; + ltmd->angle= M_PI * 2.0; + ltmd->axis= 2; + ltmd->flag= 0; + ltmd->steps= 16; + ltmd->render_steps= 16; + ltmd->iter= 1; +} + +static void copyData(ModifierData *md, ModifierData *target) +{ + ScrewModifierData *sltmd= (ScrewModifierData*) md; + ScrewModifierData *tltmd= (ScrewModifierData*) target; + + tltmd->ob_axis= sltmd->ob_axis; + tltmd->angle= sltmd->angle; + tltmd->axis= sltmd->axis; + tltmd->flag= sltmd->flag; + tltmd->steps= sltmd->steps; + tltmd->render_steps= sltmd->render_steps; + tltmd->screw_ofs= sltmd->screw_ofs; + tltmd->iter= sltmd->iter; +} + +static DerivedMesh *applyModifier(ModifierData *md, Object *ob, + DerivedMesh *derivedData, + int useRenderParams, int isFinalCalc) +{ + DerivedMesh *dm= derivedData; + DerivedMesh *result; + ScrewModifierData *ltmd= (ScrewModifierData*) md; + + int *origindex; + int mface_index=0; + int i, j; + int i1,i2; + int steps= ltmd->steps; + int maxVerts=0, maxEdges=0, maxFaces=0; + int totvert= dm->getNumVerts(dm); + int totedge= dm->getNumEdges(dm); + + char axis_char= 'X', close; + float angle= ltmd->angle; + float screw_ofs= ltmd->screw_ofs; + float axis_vec[3]= {0.0f, 0.0f, 0.0f}; + float tmp_vec1[3], tmp_vec2[3]; + float mat3[3][3]; + float mtx_tx[4][4]; /* transform the coords by an object relative to this objects transformation */ + float mtx_tx_inv[4][4]; /* inverted */ + float mtx_tmp_a[4][4]; + + int vc_tot_linked= 0; + short other_axis_1, other_axis_2; + float *tmpf1, *tmpf2; + + MFace *mface_new, *mf_new; + MEdge *medge_orig, *med_orig, *med_new, *med_new_firstloop, *medge_new; + MVert *mvert_new, *mvert_orig, *mv_orig, *mv_new, *mv_new_base; + + ScrewVertConnect *vc, *vc_tmp, *vert_connect= NULL; + + float mat[4][4] = {{0.0f, 0.0f, 0.0f, 0.0f}, + {0.0f, 0.0f, 0.0f, 0.0f}, + {0.0f, 0.0f, 0.0f, 0.0f}, + {0.0f, 0.0f, 0.0f, 1.0f}}; + + /* dont do anything? */ + if (!totvert) + return CDDM_from_template(dm, 0, 0, 0, 0, 0); + + steps= useRenderParams ? ltmd->render_steps : ltmd->steps; + + switch(ltmd->axis) { + case 0: + other_axis_1=1; + other_axis_2=2; + break; + case 1: + other_axis_1=0; + other_axis_2=2; + break; + default: /* 2, use default to quiet warnings */ + other_axis_1=0; + other_axis_2=1; + break; + } + + axis_vec[ltmd->axis]= 1.0f; + + if (ltmd->ob_axis) { + float mtx3_tx[3][3]; + /* calc the matrix relative to the axis object */ + invert_m4_m4(mtx_tmp_a, ob->obmat); + copy_m4_m4(mtx_tx_inv, ltmd->ob_axis->obmat); + mul_m4_m4m4(mtx_tx, mtx_tx_inv, mtx_tmp_a); + + copy_m3_m4(mtx3_tx, mtx_tx); + + /* calc the axis vec */ + mul_m3_v3(mtx3_tx, axis_vec); + normalize_v3(axis_vec); + + /* screw */ + if(ltmd->flag & MOD_SCREW_OBJECT_OFFSET) { + /* find the offset along this axis relative to this objects matrix */ + float totlen = len_v3(mtx_tx[3]); + + if(totlen != 0.0f) { + float zero[3]={0.0f, 0.0f, 0.0f}; + float cp[3]; + screw_ofs= closest_to_line_v3(cp, mtx_tx[3], zero, axis_vec); + } + else { + screw_ofs= 0.0f; + } + } + + /* angle */ + +#if 0 // cant incluide this, not pradictable enough, though quite fun,. + if(ltmd->flag & MOD_SCREW_OBJECT_ANGLE) { + + + float vec[3] = {0,1,0}; + float cross1[3]; + float cross2[3]; + cross_v3_v3v3(cross1, vec, axis_vec); + + mul_v3_m3v3(cross2, mtx3_tx, cross1); + { + float c1[3]; + float c2[3]; + float axis_tmp[3]; + + cross_v3_v3v3(c1, cross2, axis_vec); + cross_v3_v3v3(c2, axis_vec, c1); + + + angle= angle_v3v3(cross1, c2); + + cross_v3_v3v3(axis_tmp, cross1, c2); + normalize_v3(axis_tmp); + + if(len_v3v3(axis_tmp, axis_vec) > 1.0f) + angle= -angle; + + } + } +#endif + } + else { + /* exis char is used by i_rotate*/ + axis_char += ltmd->axis; /* 'X' + axis */ + + /* useful to be able to use the axis vec in some cases still */ + zero_v3(axis_vec); + axis_vec[ltmd->axis]= 1.0f; + } + + /* apply the multiplier */ + angle *= ltmd->iter; + screw_ofs *= ltmd->iter; + + /* multiplying the steps is a bit tricky, this works best */ + steps = ((steps + 1) * ltmd->iter) - (ltmd->iter - 1); + + /* will the screw be closed? + * Note! smaller then FLT_EPSILON*100 gives problems with float precission so its never closed. */ + if (fabs(screw_ofs) <= (FLT_EPSILON*100) && fabs(fabs(angle) - (M_PI * 2)) <= (FLT_EPSILON*100)) { + close= 1; + steps--; + if(steps < 2) steps= 2; + + maxVerts = totvert * steps; /* -1 because we're joining back up */ + maxEdges = (totvert * steps) + /* these are the edges between new verts */ + (totedge * steps); /* -1 because vert edges join */ + maxFaces = totedge * steps; + + screw_ofs= 0.0f; + } + else { + close= 0; + if(steps < 2) steps= 2; + + maxVerts = totvert * steps; /* -1 because we're joining back up */ + maxEdges = (totvert * (steps-1)) + /* these are the edges between new verts */ + (totedge * steps); /* -1 because vert edges join */ + maxFaces = totedge * (steps-1); + } + + result= CDDM_from_template(dm, maxVerts, maxEdges, maxFaces, 0, 0); + + /* copy verts from mesh */ + mvert_orig = dm->getVertArray(dm); + medge_orig = dm->getEdgeArray(dm); + + mvert_new = result->getVertArray(result); + mface_new = result->getTessFaceArray(result); + medge_new = result->getEdgeArray(result); + + origindex= result->getTessFaceDataArray(result, CD_ORIGINDEX); + + /* Set the locations of the first set of verts */ + + mv_new= mvert_new; + mv_orig= mvert_orig; + + /* Copy the first set of edges */ + med_orig= medge_orig; + med_new= medge_new; + for (i=0; i < totedge; i++, med_orig++, med_new++) { + med_new->v1= med_orig->v1; + med_new->v2= med_orig->v2; + med_new->crease= med_orig->crease; + med_new->flag= med_orig->flag & ~ME_LOOSEEDGE; + } + + if(ltmd->flag & MOD_SCREW_NORMAL_CALC) { + /* + * Normal Calculation (for face flipping) + * Sort edge verts for correct face flipping + * NOT REALLY NEEDED but face flipping is nice. + * + * */ + + + /* Notice! + * + * Since we are only ordering the edges here it can avoid mallocing the + * extra space by abusing the vert array berfore its filled with new verts. + * The new array for vert_connect must be at least sizeof(ScrewVertConnect) * totvert + * and the size of our resulting meshes array is sizeof(MVert) * totvert * 3 + * so its safe to use the second 2 thrids of MVert the array for vert_connect, + * just make sure ScrewVertConnect struct is no more then twice as big as MVert, + * at the moment there is no chance of that being a problem, + * unless MVert becomes half its current size. + * + * once the edges are ordered, vert_connect is not needed and it can be used for verts + * + * This makes the modifier faster with one less alloc. + */ + + vert_connect= MEM_mallocN(sizeof(ScrewVertConnect) * totvert, "ScrewVertConnect"); + //vert_connect= (ScrewVertConnect *) &medge_new[totvert]; /* skip the first slice of verts */ + vc= vert_connect; + + /* Copy Vert Locations */ + /* - We can do this in a later loop - only do here if no normal calc */ + if (!totedge) { + for (i=0; i < totvert; i++, mv_orig++, mv_new++) { + copy_v3_v3(mv_new->co, mv_orig->co); + normalize_v3_v3(vc->no, mv_new->co); /* no edges- this is realy a dummy normal */ + } + } + else { + /*printf("\n\n\n\n\nStarting Modifier\n");*/ + /* set edge users */ + med_new= medge_new; + mv_new= mvert_new; + + if (ltmd->ob_axis) { + /*mtx_tx is initialized early on */ + for (i=0; i < totvert; i++, mv_new++, mv_orig++, vc++) { + vc->co[0]= mv_new->co[0]= mv_orig->co[0]; + vc->co[1]= mv_new->co[1]= mv_orig->co[1]; + vc->co[2]= mv_new->co[2]= mv_orig->co[2]; + + vc->flag= 0; + vc->e[0]= vc->e[1]= NULL; + vc->v[0]= vc->v[1]= -1; + + mul_m4_v3(mtx_tx, vc->co); + /* length in 2d, dont sqrt because this is only for comparison */ + vc->dist = vc->co[other_axis_1]*vc->co[other_axis_1] + + vc->co[other_axis_2]*vc->co[other_axis_2]; + + /* printf("location %f %f %f -- %f\n", vc->co[0], vc->co[1], vc->co[2], vc->dist);*/ + } + } + else { + for (i=0; i < totvert; i++, mv_new++, mv_orig++, vc++) { + vc->co[0]= mv_new->co[0]= mv_orig->co[0]; + vc->co[1]= mv_new->co[1]= mv_orig->co[1]; + vc->co[2]= mv_new->co[2]= mv_orig->co[2]; + + vc->flag= 0; + vc->e[0]= vc->e[1]= NULL; + vc->v[0]= vc->v[1]= -1; + + /* length in 2d, dont sqrt because this is only for comparison */ + vc->dist = vc->co[other_axis_1]*vc->co[other_axis_1] + + vc->co[other_axis_2]*vc->co[other_axis_2]; + + /* printf("location %f %f %f -- %f\n", vc->co[0], vc->co[1], vc->co[2], vc->dist);*/ + } + } + + /* this loop builds connectivity info for verts */ + for (i=0; i<totedge; i++, med_new++) { + vc= &vert_connect[med_new->v1]; + + if (vc->v[0]==-1) { /* unused */ + vc->v[0]= med_new->v2; + vc->e[0]= med_new; + } + else if (vc->v[1]==-1) { + vc->v[1]= med_new->v2; + vc->e[1]= med_new; + } + else { + vc->v[0]= vc->v[1]= -2; /* erro value - dont use, 3 edges on vert */ + } + + vc= &vert_connect[med_new->v2]; + + /* same as above but swap v1/2 */ + if (vc->v[0]==-1) { /* unused */ + vc->v[0]= med_new->v1; + vc->e[0]= med_new; + } + else if (vc->v[1]==-1) { + vc->v[1]= med_new->v1; + vc->e[1]= med_new; + } + else { + vc->v[0]= vc->v[1]= -2; /* erro value - dont use, 3 edges on vert */ + } + } + + /* find the first vert */ + vc= vert_connect; + for (i=0; i < totvert; i++, vc++) { + int VBEST=-1, ed_loop_closed=0; /* vert and vert new */ + int ed_loop_flip; + float fl= -1.0f; + ScrewVertIter lt_iter; + + /* Now do search for connected verts, order all edges and flip them + * so resulting faces are flipped the right way */ + vc_tot_linked= 0; /* count the number of linked verts for this loop */ + if (vc->flag==0) { + /*printf("Loop on connected vert: %i\n", i);*/ + + for(j=0; j<2; j++) { + /*printf("\tSide: %i\n", j);*/ + ScrewVertIter_INIT(lt_iter, vert_connect, i, j); + if (j==1) { + ScrewVertIter_NEXT(lt_iter); + } + while (lt_iter.v_poin) { + /*printf("\t\tVERT: %i\n", lt_iter.v);*/ + if (lt_iter.v_poin->flag) { + /*printf("\t\t\tBreaking Found end\n");*/ + //endpoints[0]= endpoints[1]= -1; + ed_loop_closed= 1; /* circle */ + break; + } + lt_iter.v_poin->flag= 1; + vc_tot_linked++; + /*printf("Testing 2 floats %f : %f\n", fl, lt_iter.v_poin->dist);*/ + if (fl <= lt_iter.v_poin->dist) { + fl= lt_iter.v_poin->dist; + VBEST= lt_iter.v; + /*printf("\t\t\tVERT BEST: %i\n", VBEST);*/ + } + ScrewVertIter_NEXT(lt_iter); + if (!lt_iter.v_poin) { + /*printf("\t\t\tFound End Also Num %i\n", j);*/ + /*endpoints[j]= lt_iter.v_other;*/ /* other is still valid */ + break; + } + } + } + + /* now we have a collection of used edges. flip their edges the right way*/ + /*if (VBEST !=-1) - */ + + /*printf("Done Looking - vc_tot_linked: %i\n", vc_tot_linked);*/ + + if (vc_tot_linked>1) { + float vf_1, vf_2, vf_best; + + vc_tmp= &vert_connect[VBEST]; + + tmpf1= vert_connect[vc_tmp->v[0]].co; + tmpf2= vert_connect[vc_tmp->v[1]].co; + + + /* edge connects on each side! */ + if ((vc_tmp->v[0] > -1) && (vc_tmp->v[1] > -1)) { + /*printf("Verts on each side (%i %i)\n", vc_tmp->v[0], vc_tmp->v[1]);*/ + /* find out which is higher */ + + vf_1= tmpf1[ltmd->axis]; + vf_2= tmpf2[ltmd->axis]; + vf_best= vc_tmp->co[ltmd->axis]; + + if (vf_1 < vf_best && vf_best < vf_2) { + ed_loop_flip= 0; + } + else if (vf_1 > vf_best && vf_best > vf_2) { + ed_loop_flip= 1; + } + else { + /* not so simple to work out which edge is higher */ + sub_v3_v3v3(tmp_vec1, tmpf1, vc_tmp->co); + sub_v3_v3v3(tmp_vec1, tmpf2, vc_tmp->co); + normalize_v3(tmp_vec1); + normalize_v3(tmp_vec2); + + if (tmp_vec1[ltmd->axis] < tmp_vec2[ltmd->axis]) { + ed_loop_flip= 1; + } + else { + ed_loop_flip= 0; + } + } + } + else if (vc_tmp->v[0] >= 0) { /*vertex only connected on 1 side */ + /*printf("Verts on ONE side (%i %i)\n", vc_tmp->v[0], vc_tmp->v[1]);*/ + if (tmpf1[ltmd->axis] < vc_tmp->co[ltmd->axis]) { /* best is above */ + ed_loop_flip= 1; + } + else { /* best is below or even... in even case we cant know whet to do. */ + ed_loop_flip= 0; + } + + }/* else { + printf("No Connected ___\n"); + }*/ + + /*printf("flip direction %i\n", ed_loop_flip);*/ + + + /* switch the flip option if set */ + if (ltmd->flag & MOD_SCREW_NORMAL_FLIP) + ed_loop_flip= !ed_loop_flip; + + if (angle < 0.0f) + ed_loop_flip= !ed_loop_flip; + + /* if its closed, we only need 1 loop */ + for(j=ed_loop_closed; j<2; j++) { + /*printf("Ordering Side J %i\n", j);*/ + + ScrewVertIter_INIT(lt_iter, vert_connect, VBEST, j); + /*printf("\n\nStarting - Loop\n");*/ + lt_iter.v_poin->flag= 1; /* so a non loop will traverse the other side */ + + + /* If this is the vert off the best vert and + * the best vert has 2 edges connected too it + * then swap the flip direction */ + if (j==1 && (vc_tmp->v[0] > -1) && (vc_tmp->v[1] > -1)) + ed_loop_flip= !ed_loop_flip; + + while (lt_iter.v_poin && lt_iter.v_poin->flag != 2) { + /*printf("\tOrdering Vert V %i\n", lt_iter.v);*/ + + lt_iter.v_poin->flag= 2; + if (lt_iter.e) { + if (lt_iter.v == lt_iter.e->v1) { + if (ed_loop_flip==0) { + /*printf("\t\t\tFlipping 0\n");*/ + SWAP(int, lt_iter.e->v1, lt_iter.e->v2); + }/* else { + printf("\t\t\tFlipping Not 0\n"); + }*/ + } + else if (lt_iter.v == lt_iter.e->v2) { + if (ed_loop_flip==1) { + /*printf("\t\t\tFlipping 1\n");*/ + SWAP(int, lt_iter.e->v1, lt_iter.e->v2); + }/* else { + printf("\t\t\tFlipping Not 1\n"); + }*/ + }/* else { + printf("\t\tIncorrect edge topology"); + }*/ + }/* else { + printf("\t\tNo Edge at this point\n"); + }*/ + ScrewVertIter_NEXT(lt_iter); + } + } + } + } + + /* *VERTEX NORMALS* + * we know the surrounding edges are ordered correctly now + * so its safe to create vertex normals. + * + * calculate vertex normals that can be propodated on lathing + * use edge connectivity work this out */ + if (vc->v[0]>=0) { + if (vc->v[1]>=0) { + /* 2 edges connedted */ + /* make 2 connecting vert locations relative to the middle vert */ + sub_v3_v3v3(tmp_vec1, mvert_new[vc->v[0]].co, mvert_new[i].co); + sub_v3_v3v3(tmp_vec2, mvert_new[vc->v[1]].co, mvert_new[i].co); + /* normalize so both edges have the same influence, no matter their length */ + normalize_v3(tmp_vec1); + normalize_v3(tmp_vec2); + + /* vc_no_tmp1 - this line is the average direction of both connecting edges + * + * Use the edge order to make the subtraction, flip the normal the right way + * edge should be there but check just in case... */ + if (vc->e && vc->e[0]->v1 == i) { + sub_v3_v3(tmp_vec1, tmp_vec2); + } + else { + sub_v3_v3v3(tmp_vec1, tmp_vec2, tmp_vec1); + } + } + else { + /* only 1 edge connected - same as above except + * dont need to average edge direction */ + if (vc->e && vc->e[0]->v2 == i) { + sub_v3_v3v3(tmp_vec1, mvert_new[i].co, mvert_new[vc->v[0]].co); + } + else { + sub_v3_v3v3(tmp_vec1, mvert_new[vc->v[0]].co, mvert_new[i].co); + } + } + + /* vc_no_tmp2 - is a line 90d from the pivot to the vec + * This is used so the resulting normal points directly away from the middle */ + cross_v3_v3v3(tmp_vec2, axis_vec, vc->co); + + /* edge average vector and right angle to the pivot make the normal */ + cross_v3_v3v3(vc->no, tmp_vec1, tmp_vec2); + + } + else { + copy_v3_v3(vc->no, vc->co); + } + + /* we wont be looping on this data again so copy normals here */ + if (angle < 0.0f) + negate_v3(vc->no); + + normalize_v3(vc->no); + normal_float_to_short_v3(mvert_new[i].no, vc->no); + + /* Done with normals */ + } + } + } + else { + + if (ltmd->flag & MOD_SCREW_NORMAL_FLIP) { + mv_orig= mvert_orig; + mv_new= mvert_new + (totvert-1); + + for (i=0; i < totvert; i++, mv_new--, mv_orig++) { + copy_v3_v3(mv_new->co, mv_orig->co); + } + } + else { + mv_orig= mvert_orig; + mv_new= mvert_new; + + for (i=0; i < totvert; i++, mv_new++, mv_orig++) { + copy_v3_v3(mv_new->co, mv_orig->co); + } + } + } + /* done with edge connectivity based normal flipping */ + + + /* Add Faces */ + for (i=1; i < steps; i++) { + float step_angle; + float no_tx[3]; + /* Rotation Matrix */ + if (close) step_angle= (angle / steps) * i; + else step_angle= (angle / (steps-1)) * i; + + if (ltmd->ob_axis) { + axis_angle_to_mat3(mat3, axis_vec, step_angle); + copy_m4_m3(mat, mat3); + } + else { + unit_m4(mat); + rotate_m4(mat, axis_char, step_angle); + copy_m3_m4(mat3, mat); + } + + if(screw_ofs) + madd_v3_v3fl(mat[3], axis_vec, screw_ofs * ((float)i / (float)(steps-1))); + + mv_new_base= mvert_new; + mv_new= &mvert_new[totvert*i]; /* advance to the next slice */ + + for (j=0; j<totvert; j++, mv_new_base++, mv_new++) { + /* set normal */ + if(vert_connect) { + mul_v3_m3v3(no_tx, mat3, vert_connect[j].no); + + /* set the normal now its transformed */ + normal_float_to_short_v3(mv_new->no, no_tx); + } + + /* set location */ + copy_v3_v3(mv_new->co, mv_new_base->co); + + /* only need to set these if using non cleared memory */ + /*mv_new->mat_nr= mv_new->flag= 0;*/ + + if (ltmd->ob_axis) { + sub_v3_v3(mv_new->co, mtx_tx[3]); + + mul_m4_v3(mat, mv_new->co); + + add_v3_v3(mv_new->co, mtx_tx[3]); + } + else { + mul_m4_v3(mat, mv_new->co); + } + + /* add the new edge */ + med_new->v1= j+(i*totvert); + med_new->v2= med_new->v1 - totvert; + med_new->flag= ME_EDGEDRAW|ME_EDGERENDER; + med_new++; + } + } + + /* we can avoid if using vert alloc trick */ + if(vert_connect) { + MEM_freeN(vert_connect); + vert_connect= NULL; + } + + if (close) { + /* last loop of edges, previous loop dosnt account for the last set of edges */ + for (i=0; i<totvert; i++) { + med_new->v1= i; + med_new->v2= i+((steps-1)*totvert); + med_new->flag= ME_EDGEDRAW|ME_EDGERENDER; + med_new++; + } + } + + mf_new= mface_new; + med_new_firstloop= medge_new; + + for (i=0; i < totedge; i++, med_new_firstloop++) { + /* for each edge, make a cylinder of quads */ + i1= med_new_firstloop->v1; + i2= med_new_firstloop->v2; + + for (j=0; j < steps-1; j++) { + + /* new face */ + mf_new->v1= i1; + mf_new->v2= i2; + mf_new->v3= i2 + totvert; + mf_new->v4= i1 + totvert; + + if( !mf_new->v3 || !mf_new->v4 ) { + SWAP(int, mf_new->v1, mf_new->v3); + SWAP(int, mf_new->v2, mf_new->v4); + } + mf_new->flag= ME_SMOOTH; + origindex[mface_index]= ORIGINDEX_NONE; + mf_new++; + mface_index++; + + /* new vertical edge */ + if (j) { /* The first set is alredy dome */ + med_new->v1= i1; + med_new->v2= i2; + med_new->flag= med_new_firstloop->flag; + med_new->crease= med_new_firstloop->crease; + med_new++; + } + i1 += totvert; + i2 += totvert; + } + + /* close the loop*/ + if (close) { + mf_new->v1= i1; + mf_new->v2= i2; + mf_new->v3= med_new_firstloop->v2; + mf_new->v4= med_new_firstloop->v1; + + if( !mf_new->v3 || !mf_new->v4 ) { + SWAP(int, mf_new->v1, mf_new->v3); + SWAP(int, mf_new->v2, mf_new->v4); + } + mf_new->flag= ME_SMOOTH; + origindex[mface_index]= ORIGINDEX_NONE; + mf_new++; + mface_index++; + } + + /* new vertical edge */ + med_new->v1= i1; + med_new->v2= i2; + med_new->flag= med_new_firstloop->flag & ~ME_LOOSEEDGE; + med_new->crease= med_new_firstloop->crease; + med_new++; + } + + if((ltmd->flag & MOD_SCREW_NORMAL_CALC)==0) { + CDDM_calc_normals(result); + } + + dm = CDDM_copy(result, 1); /*builds ngon faces from tess (mface) faces*/ + result->needsFree = 1; + result->release(result); +} + + +static void updateDepgraph( + ModifierData *md, DagForest *forest, + struct Scene *scene, Object *ob, DagNode *obNode) +{ + ScrewModifierData *ltmd= (ScrewModifierData*) md; + + if(ltmd->ob_axis) { + DagNode *curNode= dag_get_node(forest, ltmd->ob_axis); + + dag_add_relation(forest, curNode, obNode, + DAG_RL_DATA_DATA | DAG_RL_OB_DATA, + "Screw Modifier"); + } +} + +static void foreachObjectLink( + ModifierData *md, Object *ob, + void (*walk)(void *userData, Object *ob, Object **obpoin), + void *userData) +{ + ScrewModifierData *ltmd= (ScrewModifierData*) md; + + walk(userData, ob, <md->ob_axis); +} + +/* This dosnt work with material*/ +static DerivedMesh *applyModifierEM( + ModifierData *md, Object *ob, struct EditMesh *editData, + DerivedMesh *derivedData) +{ + return applyModifier(md, ob, derivedData, 0, 1); +} + +static int dependsOnTime(ModifierData *md) +{ + return 0; +} + + +ModifierTypeInfo modifierType_Screw = { + /* name */ "Screw", + /* structName */ "ScrewModifierData", + /* structSize */ sizeof(ScrewModifierData), + /* type */ eModifierTypeType_Constructive, + + /* flags */ eModifierTypeFlag_AcceptsMesh + | eModifierTypeFlag_AcceptsCVs + | eModifierTypeFlag_SupportsEditmode + | eModifierTypeFlag_EnableInEditmode, + + /* copyData */ copyData, + /* deformVerts */ 0, + /* deformVertsEM */ 0, + /* deformMatricesEM */ 0, + /* applyModifier */ applyModifier, + /* applyModifierEM */ applyModifierEM, + /* initData */ initData, + /* requiredDataMask */ 0, + /* freeData */ 0, + /* isDisabled */ 0, + /* updateDepgraph */ updateDepgraph, + /* dependsOnTime */ dependsOnTime, + /* foreachObjectLink */ foreachObjectLink, + /* foreachIDLink */ 0, +}; |