diff options
Diffstat (limited to 'source/blender/src/buttons_logic.c')
-rw-r--r-- | source/blender/src/buttons_logic.c | 1066 |
1 files changed, 785 insertions, 281 deletions
diff --git a/source/blender/src/buttons_logic.c b/source/blender/src/buttons_logic.c index 27caedf0cdd..cb09f947f3c 100644 --- a/source/blender/src/buttons_logic.c +++ b/source/blender/src/buttons_logic.c @@ -88,6 +88,7 @@ #include "mydevice.h" #include "nla.h" /* For __NLA : Important, do not remove */ #include "butspace.h" // own module +#include "interface.h" /* internals */ void buttons_enji(uiBlock *, Object *); @@ -228,7 +229,7 @@ static void sca_move_sensor(void *datav, void *data2_unused) bSensor *sens_to_delete= datav; int val; Base *base; - bSensor *sens; + bSensor *sens, *tmp; val= pupmenu("Move up%x1|Move down %x2"); @@ -245,12 +246,24 @@ static void sca_move_sensor(void *datav, void *data2_unused) if(sens) { if( val==1 && sens->prev) { - BLI_remlink(&base->object->sensors, sens); - BLI_insertlinkbefore(&base->object->sensors, sens->prev, sens); + for (tmp=sens->prev; tmp; tmp=tmp->prev) { + if (tmp->flag & SENS_VISIBLE) + break; + } + if (tmp) { + BLI_remlink(&base->object->sensors, sens); + BLI_insertlinkbefore(&base->object->sensors, tmp, sens); + } } else if( val==2 && sens->next) { - BLI_remlink(&base->object->sensors, sens); - BLI_insertlink(&base->object->sensors, sens->next, sens); + for (tmp=sens->next; tmp; tmp=tmp->next) { + if (tmp->flag & SENS_VISIBLE) + break; + } + if (tmp) { + BLI_remlink(&base->object->sensors, sens); + BLI_insertlink(&base->object->sensors, tmp, sens); + } } BIF_undo_push("Move sensor"); allqueue(REDRAWBUTSLOGIC, 0); @@ -267,7 +280,7 @@ static void sca_move_controller(void *datav, void *data2_unused) bController *controller_to_del= datav; int val; Base *base; - bController *cont; + bController *cont, *tmp; val= pupmenu("Move up%x1|Move down %x2"); @@ -284,12 +297,27 @@ static void sca_move_controller(void *datav, void *data2_unused) if(cont) { if( val==1 && cont->prev) { - BLI_remlink(&base->object->controllers, cont); - BLI_insertlinkbefore(&base->object->controllers, cont->prev, cont); + /* locate the controller that has the same state mask but is earlier in the list */ + tmp = cont->prev; + while(tmp) { + if(tmp->state_mask & cont->state_mask) + break; + tmp = tmp->prev; + } + if (tmp) { + BLI_remlink(&base->object->controllers, cont); + BLI_insertlinkbefore(&base->object->controllers, tmp, cont); + } } else if( val==2 && cont->next) { + tmp = cont->next; + while(tmp) { + if(tmp->state_mask & cont->state_mask) + break; + tmp = tmp->next; + } BLI_remlink(&base->object->controllers, cont); - BLI_insertlink(&base->object->controllers, cont->next, cont); + BLI_insertlink(&base->object->controllers, tmp, cont); } BIF_undo_push("Move controller"); allqueue(REDRAWBUTSLOGIC, 0); @@ -306,7 +334,7 @@ static void sca_move_actuator(void *datav, void *data2_unused) bActuator *actuator_to_move= datav; int val; Base *base; - bActuator *act; + bActuator *act, *tmp; val= pupmenu("Move up%x1|Move down %x2"); @@ -323,12 +351,25 @@ static void sca_move_actuator(void *datav, void *data2_unused) if(act) { if( val==1 && act->prev) { - BLI_remlink(&base->object->actuators, act); - BLI_insertlinkbefore(&base->object->actuators, act->prev, act); + /* locate the first visible actuators before this one */ + for (tmp = act->prev; tmp; tmp=tmp->prev) { + if (tmp->flag & ACT_VISIBLE) + break; + } + if (tmp) { + BLI_remlink(&base->object->actuators, act); + BLI_insertlinkbefore(&base->object->actuators, tmp, act); + } } else if( val==2 && act->next) { - BLI_remlink(&base->object->actuators, act); - BLI_insertlink(&base->object->actuators, act->next, act); + for (tmp=act->next; tmp; tmp=tmp->next) { + if (tmp->flag & ACT_VISIBLE) + break; + } + if (tmp) { + BLI_remlink(&base->object->actuators, act); + BLI_insertlink(&base->object->actuators, tmp, act); + } } BIF_undo_push("Move actuator"); allqueue(REDRAWBUTSLOGIC, 0); @@ -346,9 +387,8 @@ void do_logic_buts(unsigned short event) bSensor *sens; bController *cont; bActuator *act; - Base *base; Object *ob; - int didit; + int didit, bit; ob= OBACT; if(ob==0) return; @@ -402,16 +442,14 @@ void do_logic_buts(unsigned short event) break; case B_ADD_SENS: - base= FIRSTBASE; - while(base) { - if(base->object->scaflag & OB_ADDSENS) { - base->object->scaflag &= ~OB_ADDSENS; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + if(ob->scaflag & OB_ADDSENS) { + ob->scaflag &= ~OB_ADDSENS; sens= new_sensor(SENS_ALWAYS); - BLI_addtail(&(base->object->sensors), sens); + BLI_addtail(&(ob->sensors), sens); make_unique_prop_names(sens->name); - base->object->scaflag |= OB_SHOWSENS; + ob->scaflag |= OB_SHOWSENS; } - base= base->next; } BIF_undo_push("Add sensor"); @@ -419,9 +457,8 @@ void do_logic_buts(unsigned short event) break; case B_CHANGE_SENS: - base= FIRSTBASE; - while(base) { - sens= base->object->sensors.first; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + sens= ob->sensors.first; while(sens) { if(sens->type != sens->otype) { init_sensor(sens); @@ -430,49 +467,77 @@ void do_logic_buts(unsigned short event) } sens= sens->next; } - base= base->next; } allqueue(REDRAWBUTSLOGIC, 0); break; case B_DEL_SENS: - base= FIRSTBASE; - while(base) { - sens= base->object->sensors.first; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + sens= ob->sensors.first; while(sens) { if(sens->flag & SENS_DEL) { - BLI_remlink(&(base->object->sensors), sens); + BLI_remlink(&(ob->sensors), sens); free_sensor(sens); break; } sens= sens->next; } - base= base->next; } BIF_undo_push("Delete sensor"); allqueue(REDRAWBUTSLOGIC, 0); break; case B_ADD_CONT: - base= FIRSTBASE; - while(base) { - if(base->object->scaflag & OB_ADDCONT) { - base->object->scaflag &= ~OB_ADDCONT; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + if(ob->scaflag & OB_ADDCONT) { + ob->scaflag &= ~OB_ADDCONT; cont= new_controller(CONT_LOGIC_AND); make_unique_prop_names(cont->name); - base->object->scaflag |= OB_SHOWCONT; - BLI_addtail(&(base->object->controllers), cont); + ob->scaflag |= OB_SHOWCONT; + BLI_addtail(&(ob->controllers), cont); + /* set the controller state mask from the current object state. + A controller is always in a single state, so select the lowest bit set + from the object state */ + for (bit=0; bit<32; bit++) { + if (ob->state & (1<<bit)) + break; + } + cont->state_mask = (1<<bit); + if (cont->state_mask == 0) { + /* shouldn't happen, object state is never 0 */ + cont->state_mask = 1; + } } - base= base->next; } BIF_undo_push("Add controller"); allqueue(REDRAWBUTSLOGIC, 0); break; + case B_SET_STATE_BIT: + for(ob=G.main->object.first; ob; ob=ob->id.next) { + if(ob->scaflag & OB_SETSTBIT) { + ob->scaflag &= ~OB_SETSTBIT; + ob->state = 0x3FFFFFFF; + } + } + allqueue(REDRAWBUTSLOGIC, 0); + break; + + case B_INIT_STATE_BIT: + for(ob=G.main->object.first; ob; ob=ob->id.next) { + if(ob->scaflag & OB_INITSTBIT) { + ob->scaflag &= ~OB_INITSTBIT; + ob->state = ob->init_state; + if (!ob->state) + ob->state = 1; + } + } + allqueue(REDRAWBUTSLOGIC, 0); + break; + case B_CHANGE_CONT: - base= FIRSTBASE; - while(base) { - cont= base->object->controllers.first; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + cont= ob->controllers.first; while(cont) { if(cont->type != cont->otype) { init_controller(cont); @@ -481,51 +546,45 @@ void do_logic_buts(unsigned short event) } cont= cont->next; } - base= base->next; } allqueue(REDRAWBUTSLOGIC, 0); break; case B_DEL_CONT: - base= FIRSTBASE; - while(base) { - cont= base->object->controllers.first; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + cont= ob->controllers.first; while(cont) { if(cont->flag & CONT_DEL) { - BLI_remlink(&(base->object->controllers), cont); + BLI_remlink(&(ob->controllers), cont); unlink_controller(cont); free_controller(cont); break; } cont= cont->next; } - base= base->next; } BIF_undo_push("Delete controller"); allqueue(REDRAWBUTSLOGIC, 0); break; - + case B_ADD_ACT: - base= FIRSTBASE; - while(base) { - if(base->object->scaflag & OB_ADDACT) { - base->object->scaflag &= ~OB_ADDACT; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + if(ob->scaflag & OB_ADDACT) { + ob->scaflag &= ~OB_ADDACT; act= new_actuator(ACT_OBJECT); make_unique_prop_names(act->name); - BLI_addtail(&(base->object->actuators), act); - base->object->scaflag |= OB_SHOWACT; + BLI_addtail(&(ob->actuators), act); + ob->scaflag |= OB_SHOWACT; } - base= base->next; } BIF_undo_push("Add actuator"); allqueue(REDRAWBUTSLOGIC, 0); break; case B_CHANGE_ACT: - base= FIRSTBASE; - while(base) { - act= base->object->actuators.first; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + act= ob->actuators.first; while(act) { if(act->type != act->otype) { init_actuator(act); @@ -534,25 +593,22 @@ void do_logic_buts(unsigned short event) } act= act->next; } - base= base->next; } allqueue(REDRAWBUTSLOGIC, 0); break; case B_DEL_ACT: - base= FIRSTBASE; - while(base) { - act= base->object->actuators.first; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + act= ob->actuators.first; while(act) { if(act->flag & ACT_DEL) { - BLI_remlink(&(base->object->actuators), act); + BLI_remlink(&(ob->actuators), act); unlink_actuator(act); free_actuator(act); break; } act= act->next; } - base= base->next; } BIF_undo_push("Delete actuator"); allqueue(REDRAWBUTSLOGIC, 0); @@ -561,10 +617,8 @@ void do_logic_buts(unsigned short event) case B_SOUNDACT_BROWSE: /* since we don't know which... */ didit= 0; - base= FIRSTBASE; - while(base) - { - act= base->object->actuators.first; + for(ob=G.main->object.first; ob; ob=ob->id.next) { + act= ob->actuators.first; while(act) { if(act->type==ACT_SOUND) @@ -605,7 +659,6 @@ void do_logic_buts(unsigned short event) } if(didit) break; - base= base->next; } allqueue(REDRAWBUTSLOGIC, 0); allqueue(REDRAWSOUND, 0); @@ -628,6 +681,8 @@ static char *sensor_name(int type) return "Keyboard"; case SENS_PROPERTY: return "Property"; + case SENS_ACTUATOR: + return "Actuator"; case SENS_MOUSE: return "Mouse"; case SENS_COLLISION: @@ -651,7 +706,7 @@ static char *sensor_pup(void) /* the number needs to match defines in game.h */ return "Sensors %t|Always %x0|Keyboard %x3|Mouse %x5|" "Touch %x1|Collision %x6|Near %x2|Radar %x7|" - "Property %x4|Random %x8|Ray %x9|Message %x10|Joystick %x11"; + "Property %x4|Random %x8|Ray %x9|Message %x10|Joystick %x11|Actuator %x12"; } static char *controller_name(int type) @@ -661,6 +716,14 @@ static char *controller_name(int type) return "AND"; case CONT_LOGIC_OR: return "OR"; + case CONT_LOGIC_NAND: + return "NAND"; + case CONT_LOGIC_NOR: + return "NOR"; + case CONT_LOGIC_XOR: + return "XOR"; + case CONT_LOGIC_XNOR: + return "XNOR"; case CONT_EXPRESSION: return "Expression"; case CONT_PYTHON: @@ -671,12 +734,14 @@ static char *controller_name(int type) static char *controller_pup(void) { - return "Controllers %t|AND %x0|OR %x1|Expression %x2|Python %x3"; + return "Controllers %t|AND %x0|OR %x1|XOR %x6|NAND %x4|NOR %x5|XNOR %x7|Expression %x2|Python %x3"; } static char *actuator_name(int type) { switch (type) { + case ACT_SHAPEACTION: + return "Shape Action"; case ACT_ACTION: return "Action"; case ACT_OBJECT: @@ -715,6 +780,8 @@ static char *actuator_name(int type) return "2D Filter"; case ACT_PARENT: return "Parent"; + case ACT_STATE: + return "State"; } return "unknown"; } @@ -730,13 +797,21 @@ static char *actuator_pup(Object *owner) return "Actuators %t|Action %x15|Motion %x0|Constraint %x9|Ipo %x1" "|Camera %x3|Sound %x5|Property %x6|Edit Object %x10" "|Scene %x11|Random %x13|Message %x14|CD %x16|Game %x17" - "|Visibility %x18|2D Filter %x19|Parent %x20"; + "|Visibility %x18|2D Filter %x19|Parent %x20|State %x22"; break; + + case OB_MESH: + return "Actuators %t|Shape Action %x21|Motion %x0|Constraint %x9|Ipo %x1" + "|Camera %x3|Sound %x5|Property %x6|Edit Object %x10" + "|Scene %x11|Random %x13|Message %x14|CD %x16|Game %x17" + "|Visibility %x18|2D Filter %x19|Parent %x20|State %x22"; + break; + default: return "Actuators %t|Motion %x0|Constraint %x9|Ipo %x1" "|Camera %x3|Sound %x5|Property %x6|Edit Object %x10" "|Scene %x11|Random %x13|Message %x14|CD %x16|Game %x17" - "|Visibility %x18|2D Filter %x19|Parent %x20"; + "|Visibility %x18|2D Filter %x19|Parent %x20|State %x22"; } } @@ -805,7 +880,8 @@ static ID **get_selected_and_linked_obs(short *count, short scavisflag) if(scavisflag & BUTS_ACT_ACT) OBACT->scavisflag |= OB_VIS_ACT; } - if(scavisflag & (BUTS_SENS_LINK|BUTS_CONT_LINK|BUTS_ACT_LINK)) { + /* BUTS_XXX_STATE are similar to BUTS_XXX_LINK for selecting the object */ + if(scavisflag & (BUTS_SENS_LINK|BUTS_CONT_LINK|BUTS_ACT_LINK|BUTS_SENS_STATE|BUTS_ACT_STATE)) { doit= 1; while(doit) { doit= 0; @@ -814,7 +890,7 @@ static ID **get_selected_and_linked_obs(short *count, short scavisflag) while(ob) { /* 1st case: select sensor when controller selected */ - if((scavisflag & BUTS_SENS_LINK) && (ob->scavisflag & OB_VIS_SENS)==0) { + if((scavisflag & (BUTS_SENS_LINK|BUTS_SENS_STATE)) && (ob->scavisflag & OB_VIS_SENS)==0) { sens= ob->sensors.first; while(sens) { for(a=0; a<sens->totlinks; a++) { @@ -869,7 +945,7 @@ static ID **get_selected_and_linked_obs(short *count, short scavisflag) } /* 4th case: select actuator when controller selected */ - if( (scavisflag & BUTS_ACT_LINK) && (ob->scavisflag & OB_VIS_CONT)) { + if( (scavisflag & (BUTS_ACT_LINK|BUTS_ACT_STATE)) && (ob->scavisflag & OB_VIS_CONT)) { cont= ob->controllers.first; while(cont) { for(a=0; a<cont->totlinks; a++) { @@ -929,6 +1005,7 @@ static int get_col_sensor(int type) case SENS_NEAR: return TH_BUT_SETTING1; case SENS_KEYBOARD: return TH_BUT_SETTING2; case SENS_PROPERTY: return TH_BUT_NUM; + case SENS_ACTUATOR: return TH_BUT_NUM; case SENS_MOUSE: return TH_BUT_TEXTFIELD; case SENS_RADAR: return TH_BUT_POPUP; case SENS_RANDOM: return TH_BUT_NEUTRAL; @@ -974,6 +1051,10 @@ static void draw_default_sensor_header(bSensor *sens, (short)(x + 10 + 0.85 * (w-20)), (short)(y - 19), (short)(0.15 * (w-20)), 19, &sens->invert, 0.0, 0.0, 0, 0, "Invert the level (output) of this sensor"); + uiDefButS(block, TOG, 1, "Lvl", + (short)(x + 10 + 0.70 * (w-20)), (short)(y - 19), (short)(0.15 * (w-20)), 19, + &sens->level, 0.0, 0.0, 0, 0, + "Level detector versus edge detector (only applicable in case of logic state transition)"); } static short draw_sensorbuttons(bSensor *sens, uiBlock *block, short xco, short yco, short width,char* objectname) @@ -989,6 +1070,7 @@ static short draw_sensorbuttons(bSensor *sens, uiBlock *block, short xco, short bRaySensor *raySens = NULL; bMessageSensor *mes = NULL; bJoystickSensor *joy = NULL; + bActuatorSensor *as = NULL; short ysize; char *str; @@ -1199,6 +1281,22 @@ static short draw_sensorbuttons(bSensor *sens, uiBlock *block, short xco, short yco-= ysize; break; } + case SENS_ACTUATOR: + { + ysize= 48; + + glRects(xco, yco-ysize, xco+width, yco); + uiEmboss((float)xco, (float)yco-ysize, + (float)xco+width, (float)yco, 1); + + draw_default_sensor_header(sens, block, xco, yco, width); + as= sens->data; + + uiDefBut(block, TEX, 1, "Act: ", xco+30,yco-44,width-60, 19, + as->name, 0, 31, 0, 0, "Actuator name, actuator active state modifications will be detected"); + yco-= ysize; + break; + } case SENS_MOUSE: { ms= sens->data; @@ -1433,6 +1531,7 @@ static int get_col_actuator(int type) { switch(type) { case ACT_ACTION: return TH_BUT_ACTION; + case ACT_SHAPEACTION: return TH_BUT_ACTION; case ACT_OBJECT: return TH_BUT_NEUTRAL; case ACT_IPO: return TH_BUT_SETTING; case ACT_PROPERTY: return TH_BUT_SETTING1; @@ -1447,6 +1546,7 @@ static int get_col_actuator(int type) case ACT_GAME: return TH_BUT_SETTING2; case ACT_VISIBILITY: return TH_BUT_NUM; case ACT_CONSTRAINT: return TH_BUT_ACTION; + case ACT_STATE: return TH_BUT_SETTING2; default: return TH_BUT_NEUTRAL; } } @@ -1457,7 +1557,54 @@ static void set_col_actuator(int item, int medium) } -static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, short yco, short width) +static void change_object_actuator(void *act, void *arg) +{ + bObjectActuator *oa = act; + int i; + + if (oa->type != oa->otype) { + switch (oa->type) { + case ACT_OBJECT_NORMAL: + memset(oa, 0, sizeof(bObjectActuator)); + oa->flag = ACT_FORCE_LOCAL|ACT_TORQUE_LOCAL|ACT_DLOC_LOCAL|ACT_DROT_LOCAL; + oa->type = ACT_OBJECT_NORMAL; + break; + + case ACT_OBJECT_SERVO: + memset(oa, 0, sizeof(bObjectActuator)); + oa->flag = ACT_LIN_VEL_LOCAL; + oa->type = ACT_OBJECT_SERVO; + oa->forcerot[0] = 30.0f; + oa->forcerot[1] = 0.5f; + oa->forcerot[2] = 0.0f; + break; + } + } +} + +void update_object_actuator_PID(void *act, void *arg) +{ + bObjectActuator *oa = act; + oa->forcerot[0] = 60.0f*oa->forcerot[1]; +} + +char *get_state_name(Object *ob, short bit) +{ + bController *cont; + unsigned int mask; + + mask = (1<<bit); + cont = ob->controllers.first; + while (cont) { + if (cont->state_mask & mask) { + return cont->name; + } + cont = cont->next; + } + return (char*)""; +} + +static short draw_actuatorbuttons(Object *ob, bActuator *act, uiBlock *block, short xco, short yco, short width) { bSoundActuator *sa = NULL; bCDActuator *cda = NULL; @@ -1476,11 +1623,13 @@ static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, sho bVisibilityActuator *visAct = NULL; bTwoDFilterActuator *tdfa = NULL; bParentActuator *parAct = NULL; + bStateActuator *staAct = NULL; float *fp; short ysize = 0, wval; char *str; - int myline; + int myline, stbit; + uiBut *but; /* yco is at the top of the rect, draw downwards */ uiBlockSetEmboss(block, UI_EMBOSSM); @@ -1490,57 +1639,105 @@ static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, sho { case ACT_OBJECT: { - ysize= 129; - - glRects(xco, yco-ysize, xco+width, yco); - uiEmboss((float)xco, (float)yco-ysize, (float)xco+width, (float)yco, 1); - oa = act->data; wval = (width-100)/3; - - uiDefBut(block, LABEL, 0, "Force", xco, yco-22, 55, 19, NULL, 0, 0, 0, 0, "Sets the force"); - uiDefButF(block, NUM, 0, "", xco+45, yco-22, wval, 19, oa->forceloc, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+wval, yco-22, wval, 19, oa->forceloc+1, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-22, wval, 19, oa->forceloc+2, -10000.0, 10000.0, 10, 0, ""); - - uiDefBut(block, LABEL, 0, "Torque", xco, yco-41, 55, 19, NULL, 0, 0, 0, 0, "Sets the torque"); - uiDefButF(block, NUM, 0, "", xco+45, yco-41, wval, 19, oa->forcerot, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+wval, yco-41, wval, 19, oa->forcerot+1, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-41, wval, 19, oa->forcerot+2, -10000.0, 10000.0, 10, 0, ""); - - uiDefBut(block, LABEL, 0, "dLoc", xco, yco-64, 45, 19, NULL, 0, 0, 0, 0, "Sets the dLoc"); - uiDefButF(block, NUM, 0, "", xco+45, yco-64, wval, 19, oa->dloc, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+wval, yco-64, wval, 19, oa->dloc+1, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-64, wval, 19, oa->dloc+2, -10000.0, 10000.0, 10, 0, ""); - - uiDefBut(block, LABEL, 0, "dRot", xco, yco-83, 45, 19, NULL, 0, 0, 0, 0, "Sets the dRot"); - uiDefButF(block, NUM, 0, "", xco+45, yco-83, wval, 19, oa->drot, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+wval, yco-83, wval, 19, oa->drot+1, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-83, wval, 19, oa->drot+2, -10000.0, 10000.0, 10, 0, ""); - - uiDefBut(block, LABEL, 0, "linV", xco, yco-106, 45, 19, NULL, 0, 0, 0, 0, "Sets the linear velocity"); - uiDefButF(block, NUM, 0, "", xco+45, yco-106, wval, 19, oa->linearvelocity, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+wval, yco-106, wval, 19, oa->linearvelocity+1, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-106, wval, 19, oa->linearvelocity+2, -10000.0, 10000.0, 10, 0, ""); - - uiDefBut(block, LABEL, 0, "angV", xco, yco-125, 45, 19, NULL, 0, 0, 0, 0, "Sets the angular velocity"); - uiDefButF(block, NUM, 0, "", xco+45, yco-125, wval, 19, oa->angularvelocity, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+wval, yco-125, wval, 19, oa->angularvelocity+1, -10000.0, 10000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-125, wval, 19, oa->angularvelocity+2, -10000.0, 10000.0, 10, 0, ""); - - uiDefButBitI(block, TOG, ACT_FORCE_LOCAL, 0, "L", xco+45+3*wval, yco-22, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); - uiDefButBitI(block, TOG, ACT_TORQUE_LOCAL, 0, "L", xco+45+3*wval, yco-41, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); - uiDefButBitI(block, TOG, ACT_DLOC_LOCAL, 0, "L", xco+45+3*wval, yco-64, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); - uiDefButBitI(block, TOG, ACT_DROT_LOCAL, 0, "L", xco+45+3*wval, yco-83, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); - uiDefButBitI(block, TOG, ACT_LIN_VEL_LOCAL, 0, "L", xco+45+3*wval, yco-106, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); - uiDefButBitI(block, TOG, ACT_ANG_VEL_LOCAL, 0, "L", xco+45+3*wval, yco-125, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); - - uiDefButBitI(block, TOG, ACT_ADD_LIN_VEL, 0, "add",xco+45+3*wval+15, yco-106, 35, 19, &oa->flag, 0.0, 0.0, 0, 0, "Toggles between ADD and SET linV"); - + if (oa->type == ACT_OBJECT_NORMAL) + { + ysize= 175; + + glRects(xco, yco-ysize, xco+width, yco); + uiEmboss((float)xco, (float)yco-ysize, (float)xco+width, (float)yco, 1); + + uiDefBut(block, LABEL, 0, "Force", xco, yco-45, 55, 19, NULL, 0, 0, 0, 0, "Sets the force"); + uiDefButF(block, NUM, 0, "", xco+45, yco-45, wval, 19, oa->forceloc, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-45, wval, 19, oa->forceloc+1, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-45, wval, 19, oa->forceloc+2, -10000.0, 10000.0, 10, 0, ""); + + uiDefBut(block, LABEL, 0, "Torque", xco, yco-64, 55, 19, NULL, 0, 0, 0, 0, "Sets the torque"); + uiDefButF(block, NUM, 0, "", xco+45, yco-64, wval, 19, oa->forcerot, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-64, wval, 19, oa->forcerot+1, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-64, wval, 19, oa->forcerot+2, -10000.0, 10000.0, 10, 0, ""); + + uiDefBut(block, LABEL, 0, "dLoc", xco, yco-87, 45, 19, NULL, 0, 0, 0, 0, "Sets the dLoc"); + uiDefButF(block, NUM, 0, "", xco+45, yco-87, wval, 19, oa->dloc, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-87, wval, 19, oa->dloc+1, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-87, wval, 19, oa->dloc+2, -10000.0, 10000.0, 10, 0, ""); + + uiDefBut(block, LABEL, 0, "dRot", xco, yco-106, 45, 19, NULL, 0, 0, 0, 0, "Sets the dRot"); + uiDefButF(block, NUM, 0, "", xco+45, yco-106, wval, 19, oa->drot, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-106, wval, 19, oa->drot+1, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-106, wval, 19, oa->drot+2, -10000.0, 10000.0, 10, 0, ""); + + uiDefBut(block, LABEL, 0, "linV", xco, yco-129, 45, 19, NULL, 0, 0, 0, 0, "Sets the linear velocity"); + uiDefButF(block, NUM, 0, "", xco+45, yco-129, wval, 19, oa->linearvelocity, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-129, wval, 19, oa->linearvelocity+1, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-129, wval, 19, oa->linearvelocity+2, -10000.0, 10000.0, 10, 0, ""); + + uiDefBut(block, LABEL, 0, "angV", xco, yco-148, 45, 19, NULL, 0, 0, 0, 0, "Sets the angular velocity"); + uiDefButF(block, NUM, 0, "", xco+45, yco-148, wval, 19, oa->angularvelocity, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-148, wval, 19, oa->angularvelocity+1, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-148, wval, 19, oa->angularvelocity+2, -10000.0, 10000.0, 10, 0, ""); + + uiDefBut(block, LABEL, 0, "damp", xco, yco-171, 45, 19, NULL, 0, 0, 0, 0, "Number of frames to reach the target velocity"); + uiDefButI(block, NUM, 0, "", xco+45, yco-171, wval, 19, &oa->damping, 0.0, 1000.0, 100, 0, ""); + + uiDefButBitS(block, TOG, ACT_FORCE_LOCAL, 0, "L", xco+45+3*wval, yco-45, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); + uiDefButBitS(block, TOG, ACT_TORQUE_LOCAL, 0, "L", xco+45+3*wval, yco-64, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); + uiDefButBitS(block, TOG, ACT_DLOC_LOCAL, 0, "L", xco+45+3*wval, yco-87, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); + uiDefButBitS(block, TOG, ACT_DROT_LOCAL, 0, "L", xco+45+3*wval, yco-106, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); + uiDefButBitS(block, TOG, ACT_LIN_VEL_LOCAL, 0, "L", xco+45+3*wval, yco-129, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); + uiDefButBitS(block, TOG, ACT_ANG_VEL_LOCAL, 0, "L", xco+45+3*wval, yco-148, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Local transformation"); + + uiDefButBitS(block, TOG, ACT_ADD_LIN_VEL, 0, "add",xco+45+3*wval+15, yco-129, 35, 19, &oa->flag, 0.0, 0.0, 0, 0, "Toggles between ADD and SET linV"); + + } else if (oa->type == ACT_OBJECT_SERVO) + { + ysize= 172; + + glRects(xco, yco-ysize, xco+width, yco); + uiEmboss((float)xco, (float)yco-ysize, (float)xco+width, (float)yco, 1); + + uiDefBut(block, LABEL, 0, "linV", xco, yco-45, 45, 19, NULL, 0, 0, 0, 0, "Sets the target linear velocity, it will be achieve by automatic application of force. Null velocity is a valid target"); + uiDefButF(block, NUM, 0, "", xco+45, yco-45, wval, 19, oa->linearvelocity, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-45, wval, 19, oa->linearvelocity+1, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-45, wval, 19, oa->linearvelocity+2, -10000.0, 10000.0, 10, 0, ""); + uiDefButBitS(block, TOG, ACT_LIN_VEL_LOCAL, 0, "L", xco+45+3*wval, yco-45, 15, 19, &oa->flag, 0.0, 0.0, 0, 0, "Velocity is defined in local coordinates"); + + uiDefBut(block, LABEL, 0, "Limit", xco, yco-68, 45, 19, NULL, 0, 0, 0, 0, "Select if the force need to be limited along certain axis (local or global depending on LinV Local flag)"); + uiDefButBitS(block, TOG, ACT_SERVO_LIMIT_X, B_REDR, "X", xco+45, yco-68, wval, 19, &oa->flag, 0.0, 0.0, 0, 0, "Set limit to force along the X axis"); + uiDefButBitS(block, TOG, ACT_SERVO_LIMIT_Y, B_REDR, "Y", xco+45+wval, yco-68, wval, 19, &oa->flag, 0.0, 0.0, 0, 0, "Set limit to force along the Y axis"); + uiDefButBitS(block, TOG, ACT_SERVO_LIMIT_Z, B_REDR, "Z", xco+45+2*wval, yco-68, wval, 19, &oa->flag, 0.0, 0.0, 0, 0, "Set limit to force along the Z axis"); + uiDefBut(block, LABEL, 0, "Max", xco, yco-87, 45, 19, NULL, 0, 0, 0, 0, "Set the upper limit for force"); + uiDefBut(block, LABEL, 0, "Min", xco, yco-106, 45, 19, NULL, 0, 0, 0, 0, "Set the lower limit for force"); + if (oa->flag & ACT_SERVO_LIMIT_X) { + uiDefButF(block, NUM, 0, "", xco+45, yco-87, wval, 19, oa->dloc, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45, yco-106, wval, 19, oa->drot, -10000.0, 10000.0, 10, 0, ""); + } + if (oa->flag & ACT_SERVO_LIMIT_Y) { + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-87, wval, 19, oa->dloc+1, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+wval, yco-106, wval, 19, oa->drot+1, -10000.0, 10000.0, 10, 0, ""); + } + if (oa->flag & ACT_SERVO_LIMIT_Z) { + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-87, wval, 19, oa->dloc+2, -10000.0, 10000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+45+2*wval, yco-106, wval, 19, oa->drot+2, -10000.0, 10000.0, 10, 0, ""); + } + uiDefBut(block, LABEL, 0, "Servo", xco, yco-129, 45, 19, NULL, 0, 0, 0, 0, "Coefficients of the PID servo controller"); + uiDefButF(block, NUMSLI, B_REDR, "P: ", xco+45, yco-129, wval*3, 19, oa->forcerot, 0.00, 200.0, 100, 0, "Proportional coefficient, typical value is 60x Integral coefficient"); + uiDefBut(block, LABEL, 0, "Slow", xco, yco-148, 45, 19, NULL, 0, 0, 0, 0, "Low value of I coefficient correspond to slow response"); + but = uiDefButF(block, NUMSLI, B_REDR, " I : ", xco+45, yco-148, wval*3, 19, oa->forcerot+1, 0.0, 3.0, 1, 0, "Integral coefficient, low value (0.01) for slow response, high value (0.5) for fast response"); + uiButSetFunc(but, update_object_actuator_PID, oa, NULL); + uiDefBut(block, LABEL, 0, "Fast", xco+45+3*wval, yco-148, 45, 19, NULL, 0, 0, 0, 0, "High value of I coefficient correspond to fast response"); + uiDefButF(block, NUMSLI, B_REDR, "D: ", xco+45, yco-167, wval*3, 19, oa->forcerot+2, -100.0, 100.0, 100, 0, "Derivate coefficient, not required, high values can cause instability"); + } + str= "Motion Type %t|Simple motion %x0|Servo Control %x1"; + but = uiDefButS(block, MENU, B_REDR, str, xco+40, yco-23, (width-80), 19, &oa->type, 0.0, 0.0, 0, 0, ""); + oa->otype = oa->type; + uiButSetFunc(but, change_object_actuator, oa, NULL); yco-= ysize; break; } case ACT_ACTION: + case ACT_SHAPEACTION: { /* DrawAct */ #ifdef __NLA_ACTION_BY_MOTION_ACTUATOR @@ -1561,31 +1758,34 @@ static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, sho #else str= "Action types %t|Play %x0|Flipper %x2|Loop Stop %x3|Loop End %x4|Property %x6"; #endif - uiDefButS(block, MENU, B_REDR, str, xco+30, yco-24, width-60, 19, &aa->type, 0.0, 0.0, 0.0, 0.0, "Action playback type"); - uiDefIDPoinBut(block, test_actionpoin_but, ID_AC, 1, "AC: ", xco+30, yco-44, width-60, 19, &aa->act, "Action name"); + uiDefButS(block, MENU, B_REDR, str, xco+30, yco-24, (width-60)/2, 19, &aa->type, 0.0, 0.0, 0.0, 0.0, "Action playback type"); + uiDefIDPoinBut(block, test_actionpoin_but, ID_AC, 1, "AC: ", xco+30 + ((width-60)/2), yco-24, (width-60)/2, 19, &aa->act, "Action name"); if(aa->type == ACT_ACTION_FROM_PROP) { - uiDefBut(block, TEX, 0, "Prop: ",xco+30, yco-64, width-60, 19, aa->name, 0.0, 31.0, 0, 0, "Use this property to define the Action position"); + uiDefBut(block, TEX, 0, "Prop: ",xco+30, yco-44, width-60, 19, aa->name, 0.0, 31.0, 0, 0, "Use this property to define the Action position"); } else { - uiDefButI(block, NUM, 0, "Sta: ",xco+30, yco-64, (width-60)/2, 19, &aa->sta, 0.0, MAXFRAMEF, 0, 0, "Start frame"); - uiDefButI(block, NUM, 0, "End: ",xco+30+(width-60)/2, yco-64, (width-60)/2, 19, &aa->end, 0.0, MAXFRAMEF, 0, 0, "End frame"); + uiDefButI(block, NUM, 0, "Sta: ",xco+30, yco-44, (width-60)/2, 19, &aa->sta, 0.0, MAXFRAMEF, 0, 0, "Start frame"); + uiDefButI(block, NUM, 0, "End: ",xco+30+(width-60)/2, yco-44, (width-60)/2, 19, &aa->end, 0.0, MAXFRAMEF, 0, 0, "End frame"); } + + uiDefButI(block, NUM, 0, "Blendin: ", xco+30, yco-64, (width-60)/2, 19, &aa->blendin, 0.0, MAXFRAMEF, 0.0, 0.0, "Number of frames of motion blending"); + uiDefButS(block, NUM, 0, "Priority: ", xco+30+(width-60)/2, yco-64, (width-60)/2, 19, &aa->priority, 0.0, 100.0, 0.0, 0.0, "Execution priority - lower numbers will override actions with higher numbers, With 2 or more actions at once, the overriding channels must be lower in the stack"); - - - uiDefButI(block, NUM, 0, "Blendin: ", xco+30, yco-84, (width-60)/2, 19, &aa->blendin, 0.0, MAXFRAMEF, 0.0, 0.0, "Number of frames of motion blending"); - uiDefButS(block, NUM, 0, "Priority: ", xco+30+(width-60)/2, yco-84, (width-60)/2, 19, &aa->priority, 0.0, 100.0, 0.0, 0.0, "Execution priority - lower numbers will override actions with higher numbers"); + uiDefBut(block, TEX, 0, "FrameProp: ",xco+30, yco-84, width-60, 19, aa->frameProp, 0.0, 31.0, 0, 0, "Assign this property this actions current frame number"); + #ifdef __NLA_ACTION_BY_MOTION_ACTUATOR if(aa->type == ACT_ACTION_MOTION) { - uiDefButF(block, NUM, 0, "Cycle: ",xco+30, yco-104, (width-60)/2, 19, &aa->stridelength, 0.0, 2500.0, 0, 0, "Distance covered by a single cycle of the action"); + uiDefButF(block, NUM, 0, "Cycle: ",xco+30, yco-84, (width-60)/2, 19, &aa->stridelength, 0.0, 2500.0, 0, 0, "Distance covered by a single cycle of the action"); } #endif + + yco-=ysize; break; } @@ -1809,8 +2009,15 @@ static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, sho uiDefButI(block, NUM, 0, "Time:", xco+10+(width-20)/2, yco-44, (width-20)/2-40, 19, &eoa->time, 0.0, 2000.0, 0, 0, "Duration the tracking takes"); uiDefButS(block, TOG, 0, "3D", xco+width-50, yco-44, 40, 19, &eoa->flag, 0.0, 0.0, 0, 0, "Enable 3D tracking"); } - - str= "Edit Object %t|Add Object %x0|End Object %x1|Replace Mesh %x2|Track to %x3"; + else if(eoa->type==ACT_EDOB_DYNAMICS) { + ysize= 48; + glRects(xco, yco-ysize, xco+width, yco); + uiEmboss((float)xco, (float)yco-ysize, (float)xco+width, (float)yco, 1); + + str= "Dynamic Operation %t|Restore Dynamics %x0|Suspend Dynamics %x1|Enable Rigid Body %x2|Disable Rigid Body %x3"; + uiDefButS(block, MENU, B_REDR, str, xco+40, yco-44, (width-80), 19, &(eoa->dyn_operation), 0.0, 0.0, 0, 0, ""); + } + str= "Edit Object %t|Add Object %x0|End Object %x1|Replace Mesh %x2|Track to %x3|Dynamics %x4"; uiDefButS(block, MENU, B_REDR, str, xco+40, yco-24, (width-80), 19, &eoa->type, 0.0, 0.0, 0, 0, ""); yco-= ysize; @@ -1818,34 +2025,97 @@ static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, sho break; case ACT_CONSTRAINT: + coa= act->data; - ysize= 44; + if (coa->type == ACT_CONST_TYPE_LOC) { + ysize= 69; - glRects(xco, yco-ysize, xco+width, yco); - uiEmboss((float)xco, (float)yco-ysize, (float)xco+width, (float)yco, 1); + glRects(xco, yco-ysize, xco+width, yco); + uiEmboss((float)xco, (float)yco-ysize, (float)xco+width, (float)yco, 1); + + /* str= "Limit %t|None %x0|Loc X %x1|Loc Y %x2|Loc Z %x4|Rot X %x8|Rot Y %x16|Rot Z %x32"; */ + /* coa->flag &= ~(63); */ + str= "Limit %t|None %x0|Loc X %x1|Loc Y %x2|Loc Z %x4"; + coa->flag &= ~(7); + coa->time = 0; + uiDefButS(block, MENU, 1, str, xco+10, yco-65, 70, 19, &coa->flag, 0.0, 0.0, 0, 0, ""); - coa= act->data; + uiDefButS(block, NUM, 0, "Damp:", xco+10, yco-45, 70, 19, &coa->damp, 0.0, 100.0, 0, 0, ""); + uiDefBut(block, LABEL, 0, "Min", xco+80, yco-45, (width-90)/2, 19, NULL, 0.0, 0.0, 0, 0, ""); + uiDefBut(block, LABEL, 0, "Max", xco+80+(width-90)/2, yco-45, (width-90)/2, 19, NULL, 0.0, 0.0, 0, 0, ""); + + if(coa->flag & ACT_CONST_LOCX) fp= coa->minloc; + else if(coa->flag & ACT_CONST_LOCY) fp= coa->minloc+1; + else if(coa->flag & ACT_CONST_LOCZ) fp= coa->minloc+2; + else if(coa->flag & ACT_CONST_ROTX) fp= coa->minrot; + else if(coa->flag & ACT_CONST_ROTY) fp= coa->minrot+1; + else fp= coa->minrot+2; + + uiDefButF(block, NUM, 0, "", xco+80, yco-65, (width-90)/2, 19, fp, -2000.0, 2000.0, 10, 0, ""); + uiDefButF(block, NUM, 0, "", xco+80+(width-90)/2, yco-65, (width-90)/2, 19, fp+3, -2000.0, 2000.0, 10, 0, ""); + } else if (coa->type == ACT_CONST_TYPE_DIST) { + ysize= 106; + + glRects(xco, yco-ysize, xco+width, yco); + uiEmboss((float)xco, (float)yco-ysize, (float)xco+width, (float)yco, 1); + + str= "Direction %t|None %x0|X axis %x1|Y axis %x2|Z axis %x4|-X axis %x8|-Y axis %x16|-Z axis %x32"; + uiDefButS(block, MENU, B_REDR, str, xco+10, yco-65, 70, 19, &coa->mode, 0.0, 0.0, 0, 0, "Set the direction of the ray"); -/* str= "Limit %t|None %x0|Loc X %x1|Loc Y %x2|Loc Z %x4|Rot X %x8|Rot Y %x16|Rot Z %x32"; */ - str= "Limit %t|None %x0|Loc X %x1|Loc Y %x2|Loc Z %x4"; - uiDefButS(block, MENU, 1, str, xco+10, yco-40, 70, 19, &coa->flag, 0.0, 0.0, 0, 0, ""); - - uiDefButS(block, NUM, 0, "Damp:", xco+10, yco-20, 70, 19, &coa->damp, 0.0, 100.0, 0, 0, ""); - uiDefBut(block, LABEL, 0, "Min", xco+80, yco-20, (width-90)/2, 19, NULL, 0.0, 0.0, 0, 0, ""); - uiDefBut(block, LABEL, 0, "Max", xco+80+(width-90)/2, yco-20, (width-90)/2, 19, NULL, 0.0, 0.0, 0, 0, ""); - - if(coa->flag & ACT_CONST_LOCX) fp= coa->minloc; - else if(coa->flag & ACT_CONST_LOCY) fp= coa->minloc+1; - else if(coa->flag & ACT_CONST_LOCZ) fp= coa->minloc+2; - else if(coa->flag & ACT_CONST_ROTX) fp= coa->minrot; - else if(coa->flag & ACT_CONST_ROTY) fp= coa->minrot+1; - else fp= coa->minrot+2; + uiDefButS(block, NUM, 0, "Damp:", xco+10, yco-45, 70, 19, &coa->damp, 0.0, 100.0, 0, 0, ""); + uiDefBut(block, LABEL, 0, "Range", xco+80, yco-45, (width-115)/2, 19, NULL, 0.0, 0.0, 0, 0, "Set the maximum length of ray"); + uiDefButBitS(block, TOG, ACT_CONST_DISTANCE, B_REDR, "Dist", xco+80+(width-115)/2, yco-45, (width-115)/2, 19, &coa->flag, 0.0, 0.0, 0, 0, "Force distance of object to point of impact of ray"); + + if(coa->mode & (ACT_CONST_DIRPX|ACT_CONST_DIRMX)) fp= coa->minloc; + else if(coa->mode & (ACT_CONST_DIRPY|ACT_CONST_DIRMY)) fp= coa->minloc+1; + else fp= coa->minloc+2; + + uiDefButF(block, NUM, 0, "", xco+80, yco-65, (width-115)/2, 19, fp+3, 0.0, 2000.0, 10, 0, "Maximum length of ray"); + if (coa->flag & ACT_CONST_DISTANCE) + uiDefButF(block, NUM, 0, "", xco+80+(width-115)/2, yco-65, (width-115)/2, 19, fp, -2000.0, 2000.0, 10, 0, "Keep this distance to target"); + uiDefButBitS(block, TOG, ACT_CONST_NORMAL, 0, "N", xco+80+(width-115), yco-65, 25, 19, + &coa->flag, 0.0, 0.0, 0, 0, "Set object axis along the normal at hit position"); + uiDefButBitS(block, TOG, ACT_CONST_MATERIAL, B_REDR, "M/P", xco+10, yco-84, 40, 19, + &coa->flag, 0.0, 0.0, 0, 0, "Detect material instead of property"); + if (coa->flag & ACT_CONST_MATERIAL) + { + uiDefBut(block, TEX, 1, "Material:", xco + 50, yco-84, (width-60), 19, + coa->matprop, 0, 31, 0, 0, + "Ray detects only Objects with this material"); + } + else + { + uiDefBut(block, TEX, 1, "Property:", xco + 50, yco-84, (width-60), 19, + coa->matprop, 0, 31, 0, 0, + "Ray detect only Objects with this property"); + } + uiDefButBitS(block, TOG, ACT_CONST_PERMANENT, 0, "PER", xco+10, yco-103, 40, 19, + &coa->flag, 0.0, 0.0, 0, 0, "Persistent actuator: stays active even if ray does not reach target"); + uiDefButS(block, NUM, 0, "time", xco+50, yco-103, (width-60)/2, 19, &(coa->time), 0.0, 1000.0, 0, 0, "Maximum activation time in frame, 0 for unlimited"); + uiDefButS(block, NUM, 0, "rotDamp", xco+50+(width-60)/2, yco-103, (width-60)/2, 19, &(coa->rotdamp), 0.0, 100.0, 0, 0, "Use a different damping for orientation"); + } else if (coa->type == ACT_CONST_TYPE_ORI) { + ysize= 87; + + glRects(xco, yco-ysize, xco+width, yco); + uiEmboss((float)xco, (float)yco-ysize, (float)xco+width, (float)yco, 1); + + str= "Direction %t|None %x0|X axis %x1|Y axis %x2|Z axis %x4"; + uiDefButS(block, MENU, B_REDR, str, xco+10, yco-65, 70, 19, &coa->mode, 0.0, 0.0, 0, 0, "Select the axis to be aligned along the reference direction"); - uiDefButF(block, NUM, 0, "", xco+80, yco-40, (width-90)/2, 19, fp, -2000.0, 2000.0, 10, 0, ""); - uiDefButF(block, NUM, 0, "", xco+80+(width-90)/2, yco-40, (width-90)/2, 19, fp+3, -2000.0, 2000.0, 10, 0, ""); + uiDefButS(block, NUM, 0, "Damp:", xco+10, yco-45, 70, 19, &coa->damp, 0.0, 100.0, 0, 0, ""); + uiDefBut(block, LABEL, 0, "X", xco+80, yco-45, (width-115)/3, 19, NULL, 0.0, 0.0, 0, 0, ""); + uiDefBut(block, LABEL, 0, "Y", xco+80+(width-115)/3, yco-45, (width-115)/3, 19, NULL, 0.0, 0.0, 0, 0, ""); + uiDefBut(block, LABEL, 0, "Z", xco+80+2*(width-115)/3, yco-45, (width-115)/3, 19, NULL, 0.0, 0.0, 0, 0, ""); + uiDefButF(block, NUM, 0, "", xco+80, yco-65, (width-115)/3, 19, &coa->maxrot[0], -2000.0, 2000.0, 10, 0, "X component of reference direction"); + uiDefButF(block, NUM, 0, "", xco+80+(width-115)/3, yco-65, (width-115)/3, 19, &coa->maxrot[1], -2000.0, 2000.0, 10, 0, "Y component of reference direction"); + uiDefButF(block, NUM, 0, "", xco+80+2*(width-115)/3, yco-65, (width-115)/3, 19, &coa->maxrot[2], -2000.0, 2000.0, 10, 0, "Z component of reference direction"); + + uiDefButS(block, NUM, 0, "time", xco+10, yco-84, 70+(width-115)/3, 19, &(coa->time), 0.0, 1000.0, 0, 0, "Maximum activation time in frame, 0 for unlimited"); + } + str= "Constraint Type %t|Location %x0|Distance %x1|Orientation %x2"; + but = uiDefButS(block, MENU, B_REDR, str, xco+40, yco-23, (width-80), 19, &coa->type, 0.0, 0.0, 0, 0, ""); yco-= ysize; - break; case ACT_SCENE: @@ -2010,6 +2280,37 @@ static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, sho break; + case ACT_STATE: + ysize = 34; + + glRects(xco, yco-ysize, xco+width, yco); + uiEmboss((float)xco, + (float)yco-ysize, (float)xco+width, (float)yco, 1); + + staAct = act->data; + + str= "Operation %t|Cpy %x0|Add %x1|Sub %x2|Inv %x3"; + + uiDefButI(block, MENU, B_REDR, str, + xco + 10, yco - 24, 65, 19, &staAct->type, + 0.0, 0.0, 0, 0, + "Select the bit operation on object state mask"); + + for (wval=0; wval<15; wval+=5) { + uiBlockBeginAlign(block); + for (stbit=0; stbit<5; stbit++) { + uiDefButBitI(block, TOG, (1<<(stbit+wval)), 0, "", (short)(xco+85+12*stbit+13*wval), yco-17, 12, 12, (int *)&(staAct->mask), 0, 0, 0, 0, get_state_name(ob, (short)(wval+stbit))); + } + for (stbit=0; stbit<5; stbit++) { + uiDefButBitI(block, TOG, (1<<(stbit+wval+15)), 0, "", (short)(xco+85+12*stbit+13*wval), yco-29, 12, 12, (int *)&(staAct->mask), 0, 0, 0, 0, get_state_name(ob, (short)(wval+stbit+15))); + } + } + uiBlockEndAlign(block); + + yco-= ysize; + + break; + case ACT_RANDOM: ysize = 69; @@ -2137,7 +2438,7 @@ static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, sho uiDefBut(block, TEX, 1, "To: ", (xco+10), (yco-(myline++*24)), (width-20), 19, &ma->toPropName, 0, 31, 0, 0, - "Optional send message to objects with this name only" + "Optional send message to objects with this name only (Prefix name with OB)" ", or empty to broadcast"); #endif @@ -2213,7 +2514,11 @@ static short draw_actuatorbuttons(bActuator *act, uiBlock *block, short xco, sho break; case ACT_2DFILTER_CUSTOMFILTER: uiDefButI(block, NUM, B_REDR, "Pass Number:", xco+30,yco-44,width-60,19,&tdfa->int_arg,0.0,MAX_RENDER_PASS-1,0.0,0.0,"Set motion blur value"); - uiDefIDPoinBut(block, test_scriptpoin_but, ID_SCRIPT, 1, "Script: ", xco+30,yco-64,width-60, 19, &tdfa->text, ""); + uiDefIDPoinBut(block, test_scriptpoin_but, ID_SCRIPT, 1, "Script: ", xco+30,yco-64,width/2-32, 19, &tdfa->text, ""); + uiDefButS(block, TOG|BIT|0, B_REDR, "Depth", xco+width/2+2 , yco - 64, width/4-16 , 19, + &tdfa->texture_flag, 0.0, 0.0, 0, 0, "Includes Depth Texture (bgl_DepthTexture)"); + uiDefButS(block, TOG|BIT|1, B_REDR, "Luminance", xco+3*width/4-14 , yco - 64, width/4-16 , 19, + &tdfa->texture_flag, 0.0, 0.0, 0, 0, "Includes Luminance Texture (bgl_LuminanceTexture)"); break; } @@ -2584,6 +2889,118 @@ void buttons_bullet(uiBlock *block, Object *ob) uiBlockEndAlign(block); } +static void check_object_state(void *arg1_but, void *arg2_mask) +{ + unsigned int *cont_mask = arg2_mask; + uiBut *but = arg1_but; + + if (*cont_mask == 0 || !(G.qual & LR_SHIFTKEY)) + *cont_mask = (1<<but->retval); + but->retval = B_REDR; +} + +static void check_controller_state_mask(void *arg1_but, void *arg2_mask) +{ + unsigned int *cont_mask = arg2_mask; + uiBut *but = arg1_but; + + /* a controller is always in a single state */ + *cont_mask = (1<<but->retval); + but->retval = B_REDR; +} + +static int first_bit(unsigned int mask) +{ + int bit; + + for (bit=0; bit<32; bit++) { + if (mask & (1<<bit)) + return bit; + } + return -1; +} + +static uiBlock *controller_state_mask_menu(void *arg_cont) +{ + uiBlock *block; + uiBut *but; + bController *cont = arg_cont; + + short yco = 12, xco = 0, stbit, offset; + + block= uiNewBlock(&curarea->uiblocks, "Controller state mask", UI_EMBOSS, UI_HELV, curarea->win); + + /* use this for a fake extra empy space around the buttons */ + uiDefBut(block, LABEL, 0, "", -5, -5, 200, 34, NULL, 0, 0, 0, 0, ""); + + for (offset=0; offset<15; offset+=5) { + uiBlockBeginAlign(block); + for (stbit=0; stbit<5; stbit++) { + but = uiDefButBitI(block, TOG, (1<<(stbit+offset)), (stbit+offset), "", (short)(xco+12*stbit+13*offset), yco, 12, 12, (int *)&(cont->state_mask), 0, 0, 0, 0, ""); + uiButSetFunc(but, check_controller_state_mask, but, &(cont->state_mask)); + } + for (stbit=0; stbit<5; stbit++) { + but = uiDefButBitI(block, TOG, (1<<(stbit+offset+15)), (stbit+offset+15), "", (short)(xco+12*stbit+13*offset), yco-12, 12, 12, (int *)&(cont->state_mask), 0, 0, 0, 0, ""); + uiButSetFunc(but, check_controller_state_mask, but, &(cont->state_mask)); + } + } + uiBlockEndAlign(block); + + uiBlockSetDirection(block, UI_TOP); + + return block; +} + +static void do_object_state_menu(void *arg, int event) +{ + Object *ob = arg; + + switch (event) { + case 0: + ob->state = 0x3FFFFFFF; + break; + case 1: + ob->state = ob->init_state; + if (!ob->state) + ob->state = 1; + break; + case 2: + ob->init_state = ob->state; + break; + } + allqueue(REDRAWBUTSLOGIC, 0); +} + +static uiBlock *object_state_mask_menu(void *arg_obj) +{ + uiBlock *block; + short xco = 0; + + block= uiNewBlock(&curarea->uiblocks, "obstatemenu", UI_EMBOSSP, UI_HELV, curarea->win); + uiBlockSetButmFunc(block, do_object_state_menu, arg_obj); + + uiDefBut(block, BUTM, 1, "Set all bits", 0, (short)(xco-=20), 160, 19, NULL, 0.0, 0.0, 1, 0, ""); + uiDefBut(block, BUTM, 1, "Recall init state", 0, (short)(xco-=20), 160, 19, NULL, 0.0, 0.0, 1, 1, ""); + uiDefBut(block, SEPR, 0, "", 0, (short)(xco-=6), 160, 6, NULL, 0.0, 0.0, 0, 0, ""); + uiDefBut(block, BUTM, 1, "Store init state", 0, (short)(xco-=20), 160, 19, NULL, 0.0, 0.0, 1, 2, ""); + + uiBlockSetDirection(block, UI_TOP); + return block; +} + +static int is_sensor_linked(uiBlock *block, bSensor *sens) +{ + bController *cont; + int i, count; + + for (count=0, i=0; i<sens->totlinks; i++) { + cont = sens->links[i]; + if (uiFindInlink(block, cont) != NULL) + return 1; + } + return 0; +} + /* never used, see CVS 1.134 for the code */ /* static FreeCamera *new_freecamera(void) */ @@ -2602,7 +3019,7 @@ void logic_buts(void) uiBlock *block; uiBut *but; World *wrld; - int a; + int a, iact, stbit, offset; short xco, yco, count, width, ycoo; char *pupstr, name[32]; @@ -2674,158 +3091,241 @@ void logic_buts(void) uiClearButLock(); idar= get_selected_and_linked_obs(&count, G.buts->scaflag); - + + /* clean ACT_LINKED and ACT_VISIBLE of all potentially visible actuators so that + we can determine which is actually linked/visible */ + for(a=0; a<count; a++) { + ob= (Object *)idar[a]; + act= ob->actuators.first; + while(act) { + act->flag &= ~(ACT_LINKED|ACT_VISIBLE); + act = act->next; + } + /* same for sensors */ + sens= ob->sensors.first; + while(sens) { + sens->flag &= ~(SENS_VISIBLE); + sens = sens->next; + } + } + + /* start with the controller because we need to know which one is visible */ /* ******************************* */ - xco= 375; yco= 170; width= 230; + xco= 695; yco= 170; width= 275; uiBlockSetEmboss(block, UI_EMBOSSP); - uiDefBlockBut(block, sensor_menu, NULL, "Sensors", xco-10, yco+35, 80, 19, ""); + uiDefBlockBut(block, controller_menu, NULL, "Controllers", xco-10, yco+35, 100, 19, ""); uiBlockSetEmboss(block, UI_EMBOSS); uiBlockBeginAlign(block); - uiDefButBitS(block, TOG, BUTS_SENS_SEL, B_REDR, "Sel", xco+110, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show all selected Objects"); - uiDefButBitS(block, TOG, BUTS_SENS_ACT, B_REDR, "Act", xco+110+(width-100)/3, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show active Object"); - uiDefButBitS(block, TOG, BUTS_SENS_LINK, B_REDR, "Link", xco+110+2*(width-100)/3, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show linked Objects to Controller"); + uiDefButBitS(block, TOG, BUTS_CONT_SEL, B_REDR, "Sel", xco+110, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show all selected Objects"); + uiDefButBitS(block, TOG, BUTS_CONT_ACT, B_REDR, "Act", xco+110+(width-100)/3, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show active Object"); + uiDefButBitS(block, TOG, BUTS_CONT_LINK, B_REDR, "Link", xco+110+2*(width-100)/3, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show linked Objects to Sensor/Actuator"); uiBlockEndAlign(block); + ob= OBACT; + for(a=0; a<count; a++) { ob= (Object *)idar[a]; uiClearButLock(); uiSetButLock(object_is_libdata(ob), ERROR_LIBDATA_MESSAGE); - - if( (ob->scavisflag & OB_VIS_SENS) == 0) continue; - + if( (ob->scavisflag & OB_VIS_CONT) == 0) continue; + /* presume it is only objects for now */ uiBlockSetEmboss(block, UI_EMBOSS); uiBlockBeginAlign(block); - if(ob->sensors.first) uiSetCurFont(block, UI_HELVB); - uiDefButBitS(block, TOG, OB_SHOWSENS, B_REDR, ob->id.name+2,(short)(xco-10), yco, (short)(width-30), 19, &ob->scaflag, 0, 31, 0, 0, "Object name, click to show/hide sensors"); - if(ob->sensors.first) uiSetCurFont(block, UI_HELV); - uiDefButBitS(block, TOG, OB_ADDSENS, B_ADD_SENS, "Add",(short)(xco+width-40), yco, 50, 19, &ob->scaflag, 0, 0, 0, 0, "Add a new Sensor"); + if(ob->controllers.first) uiSetCurFont(block, UI_HELVB); + uiDefButBitS(block, TOG, OB_SHOWCONT, B_REDR, ob->id.name+2,(short)(xco-10), yco, (short)(width-30), 19, &ob->scaflag, 0, 0, 0, 0, "Active Object name"); + if(ob->controllers.first) uiSetCurFont(block, UI_HELV); + uiDefButBitS(block, TOG, OB_ADDCONT, B_ADD_CONT, "Add",(short)(xco+width-40), yco, 50, 19, &ob->scaflag, 0, 0, 0, 0, "Add a new Controller"); uiBlockEndAlign(block); - yco-=20; + yco-=17; - if(ob->scaflag & OB_SHOWSENS) { - - sens= ob->sensors.first; - while(sens) { - uiBlockSetEmboss(block, UI_EMBOSSM); - uiDefIconButBitS(block, TOG, SENS_DEL, B_DEL_SENS, ICON_X, xco, yco, 22, 19, &sens->flag, 0, 0, 0, 0, "Delete Sensor"); - uiDefIconButBitS(block, ICONTOG, SENS_SHOW, B_REDR, ICON_RIGHTARROW, (short)(xco+width-22), yco, 22, 19, &sens->flag, 0, 0, 0, 0, "Sensor settings"); + /* mark all actuators linked to these controllers */ + /* note that some of these actuators could be from objects that are not in the display list. + It's ok because those actuators will not be displayed here */ + cont= ob->controllers.first; + while(cont) { + for (iact=0; iact<cont->totlinks; iact++) { + act = cont->links[iact]; + act->flag |= ACT_LINKED; + } + cont = cont->next; + } - ycoo= yco; - if(sens->flag & SENS_SHOW) - { - uiDefButS(block, MENU, B_CHANGE_SENS, sensor_pup(), (short)(xco+22), yco, 100, 19, &sens->type, 0, 0, 0, 0, "Sensor type"); - but= uiDefBut(block, TEX, 1, "", (short)(xco+122), yco, (short)(width-144), 19, sens->name, 0, 31, 0, 0, "Sensor name"); - uiButSetFunc(but, make_unique_prop_names_cb, sens->name, (void*) 0); + if(ob->scaflag & OB_SHOWCONT) { - sens->otype= sens->type; - yco= draw_sensorbuttons(sens, block, xco, yco, width,ob->id.name); - if(yco-6 < ycoo) ycoo= (yco+ycoo-20)/2; + /* first show the state */ + uiBlockSetEmboss(block, UI_EMBOSSP); + uiDefBlockBut(block, object_state_mask_menu, ob, "State", (short)(xco-10), (short)(yco-10), 40, 19, "Object state menu: store and retrieve initial state"); + uiBlockSetEmboss(block, UI_EMBOSS); + if (!ob->state) + ob->state = 1; + for (offset=0; offset<15; offset+=5) { + uiBlockBeginAlign(block); + for (stbit=0; stbit<5; stbit++) { + but = uiDefButBitI(block, BUT_TOGDUAL, 1<<(stbit+offset), stbit+offset, "", (short)(xco+35+12*stbit+13*offset), yco, 12, 12, (int *)&(ob->state), 0, 0, 0, 0, get_state_name(ob, (short)(stbit+offset))); + uiButSetFunc(but, check_object_state, but, &(ob->state)); } - else { - set_col_sensor(sens->type, 1); - glRecti(xco+22, yco, xco+width-22,yco+19); - but= uiDefBut(block, LABEL, 0, sensor_name(sens->type), (short)(xco+22), yco, 100, 19, sens, 0, 0, 0, 0, ""); - uiButSetFunc(but, sca_move_sensor, sens, NULL); - but= uiDefBut(block, LABEL, 0, sens->name, (short)(xco+122), yco, (short)(width-144), 19, sens, 0, 31, 0, 0, ""); - uiButSetFunc(but, sca_move_sensor, sens, NULL); + for (stbit=0; stbit<5; stbit++) { + but = uiDefButBitI(block, BUT_TOGDUAL, 1<<(stbit+offset+15), stbit+offset+15, "", (short)(xco+35+12*stbit+13*offset), yco-12, 12, 12, (int *)&(ob->state), 0, 0, 0, 0, get_state_name(ob, (short)(stbit+offset+15))); + uiButSetFunc(but, check_object_state, but, &(ob->state)); } + } + uiBlockBeginAlign(block); + uiDefButBitS(block, TOG, OB_SETSTBIT, B_SET_STATE_BIT, "All",(short)(xco+235), yco-10, 25, 19, &ob->scaflag, 0, 0, 0, 0, "Set all state bits"); + uiDefButBitS(block, TOG, OB_INITSTBIT, B_INIT_STATE_BIT, "Ini",(short)(xco+260), yco-10, 25, 19, &ob->scaflag, 0, 0, 0, 0, "Set the initial state"); + uiBlockEndAlign(block); - but= uiDefIconBut(block, LINK, 0, ICON_LINK, (short)(xco+width), ycoo, 19, 19, NULL, 0, 0, 0, 0, ""); - uiSetButLink(but, NULL, (void ***)&(sens->links), &sens->totlinks, LINK_SENSOR, LINK_CONTROLLER); - - yco-=20; + yco-=35; + + /* display only the controllers that match the current state */ + offset = 0; + for (stbit=0; stbit<32; stbit++) { + if (!(ob->state & (1<<stbit))) + continue; + /* add a separation between controllers of different states */ + if (offset) { + offset = 0; + yco -= 6; + } + cont= ob->controllers.first; + while(cont) { + if (cont->state_mask & (1<<stbit)) { + /* this controller is visible, mark all its actuator */ + for (iact=0; iact<cont->totlinks; iact++) { + act = cont->links[iact]; + act->flag |= ACT_VISIBLE; + } + uiBlockSetEmboss(block, UI_EMBOSSM); + uiDefIconButBitS(block, TOG, CONT_DEL, B_DEL_CONT, ICON_X, xco, yco, 22, 19, &cont->flag, 0, 0, 0, 0, "Delete Controller"); + uiDefIconButBitS(block, ICONTOG, CONT_SHOW, B_REDR, ICON_RIGHTARROW, (short)(xco+width-22), yco, 22, 19, &cont->flag, 0, 0, 0, 0, "Controller settings"); + uiBlockSetEmboss(block, UI_EMBOSSP); + sprintf(name, "%d", first_bit(cont->state_mask)+1); + uiDefBlockBut(block, controller_state_mask_menu, cont, name, (short)(xco+width-44), yco, 22, 19, "Set controller state mask"); + uiBlockSetEmboss(block, UI_EMBOSSM); + + if(cont->flag & CONT_SHOW) { + cont->otype= cont->type; + uiDefButS(block, MENU, B_CHANGE_CONT, controller_pup(),(short)(xco+22), yco, 100, 19, &cont->type, 0, 0, 0, 0, "Controller type"); + but= uiDefBut(block, TEX, 1, "", (short)(xco+122), yco, (short)(width-166), 19, cont->name, 0, 31, 0, 0, "Controller name"); + uiButSetFunc(but, make_unique_prop_names_cb, cont->name, (void*) 0); + + ycoo= yco; + yco= draw_controllerbuttons(cont, block, xco, yco, width); + if(yco-6 < ycoo) ycoo= (yco+ycoo-20)/2; + } + else { + cpack(0x999999); + glRecti(xco+22, yco, xco+width-22,yco+19); + but= uiDefBut(block, LABEL, 0, controller_name(cont->type), (short)(xco+22), yco, 100, 19, cont, 0, 0, 0, 0, "Controller type"); + uiButSetFunc(but, sca_move_controller, cont, NULL); + but= uiDefBut(block, LABEL, 0, cont->name,(short)(xco+122), yco,(short)(width-166), 19, cont, 0, 0, 0, 0, "Controller name"); + uiButSetFunc(but, sca_move_controller, cont, NULL); + ycoo= yco; + } + + but= uiDefIconBut(block, LINK, 0, ICON_LINK, (short)(xco+width), ycoo, 19, 19, NULL, 0, 0, 0, 0, ""); + uiSetButLink(but, NULL, (void ***)&(cont->links), &cont->totlinks, LINK_CONTROLLER, LINK_ACTUATOR); + + uiDefIconBut(block, INLINK, 0, ICON_INLINK,(short)(xco-19), ycoo, 19, 19, cont, LINK_CONTROLLER, 0, 0, 0, ""); + /* offset is >0 if at least one controller was displayed */ + offset++; + yco-=20; + } + cont= cont->next; + } - sens= sens->next; } yco-= 6; } } - + /* ******************************* */ - xco= 675; yco= 170; width= 230; + xco= 375; yco= 170; width= 250; uiBlockSetEmboss(block, UI_EMBOSSP); - uiDefBlockBut(block, controller_menu, NULL, "Controllers", xco-10, yco+35, 100, 19, ""); + uiDefBlockBut(block, sensor_menu, NULL, "Sensors", xco-10, yco+35, 70, 19, ""); uiBlockSetEmboss(block, UI_EMBOSS); uiBlockBeginAlign(block); - uiDefButBitS(block, TOG, BUTS_CONT_SEL, B_REDR, "Sel", xco+110, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show all selected Objects"); - uiDefButBitS(block, TOG, BUTS_CONT_ACT, B_REDR, "Act", xco+110+(width-100)/3, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show active Object"); - uiDefButBitS(block, TOG, BUTS_CONT_LINK, B_REDR, "Link", xco+110+2*(width-100)/3, yco+35, (width-100)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show linked Objects to Sensor/Actuator"); + uiDefButBitS(block, TOG, BUTS_SENS_SEL, B_REDR, "Sel", xco+80, yco+35, (width-70)/4, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show all selected Objects"); + uiDefButBitS(block, TOG, BUTS_SENS_ACT, B_REDR, "Act", xco+80+(width-70)/4, yco+35, (width-70)/4, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show active Object"); + uiDefButBitS(block, TOG, BUTS_SENS_LINK, B_REDR, "Link", xco+80+2*(width-70)/4, yco+35, (width-70)/4, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show linked Objects to Controller"); + uiDefButBitS(block, TOG, BUTS_SENS_STATE, B_REDR, "Sta", xco+80+3*(width-70)/4, yco+35, (width-70)/4, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show only sensors connected to active states"); uiBlockEndAlign(block); - ob= OBACT; - for(a=0; a<count; a++) { ob= (Object *)idar[a]; uiClearButLock(); uiSetButLock(object_is_libdata(ob), ERROR_LIBDATA_MESSAGE); - if( (ob->scavisflag & OB_VIS_CONT) == 0) continue; - + + if( (ob->scavisflag & OB_VIS_SENS) == 0) continue; + /* presume it is only objects for now */ uiBlockSetEmboss(block, UI_EMBOSS); uiBlockBeginAlign(block); - if(ob->controllers.first) uiSetCurFont(block, UI_HELVB); - uiDefButBitS(block, TOG, OB_SHOWCONT, B_REDR, ob->id.name+2,(short)(xco-10), yco, (short)(width-30), 19, &ob->scaflag, 0, 0, 0, 0, "Active Object name"); - if(ob->controllers.first) uiSetCurFont(block, UI_HELV); - uiDefButBitS(block, TOG, OB_ADDCONT, B_ADD_CONT, "Add",(short)(xco+width-40), yco, 50, 19, &ob->scaflag, 0, 0, 0, 0, "Add a new Controller"); + if(ob->sensors.first) uiSetCurFont(block, UI_HELVB); + uiDefButBitS(block, TOG, OB_SHOWSENS, B_REDR, ob->id.name+2,(short)(xco-10), yco, (short)(width-30), 19, &ob->scaflag, 0, 31, 0, 0, "Object name, click to show/hide sensors"); + if(ob->sensors.first) uiSetCurFont(block, UI_HELV); + uiDefButBitS(block, TOG, OB_ADDSENS, B_ADD_SENS, "Add",(short)(xco+width-40), yco, 50, 19, &ob->scaflag, 0, 0, 0, 0, "Add a new Sensor"); uiBlockEndAlign(block); yco-=20; - if(ob->scaflag & OB_SHOWCONT) { - - cont= ob->controllers.first; - while(cont) { - uiBlockSetEmboss(block, UI_EMBOSSM); - uiDefIconButBitS(block, TOG, CONT_DEL, B_DEL_CONT, ICON_X, xco, yco, 22, 19, &cont->flag, 0, 0, 0, 0, "Delete Controller"); - uiDefIconButBitS(block, ICONTOG, CONT_SHOW, B_REDR, ICON_RIGHTARROW, (short)(xco+width-22), yco, 22, 19, &cont->flag, 0, 0, 0, 0, "Controller settings"); - - if(cont->flag & CONT_SHOW) { - cont->otype= cont->type; - uiDefButS(block, MENU, B_CHANGE_CONT, controller_pup(),(short)(xco+22), yco, 100, 19, &cont->type, 0, 0, 0, 0, "Controller type"); - but= uiDefBut(block, TEX, 1, "", (short)(xco+122), yco, (short)(width-144), 19, cont->name, 0, 31, 0, 0, "Controller name"); - uiButSetFunc(but, make_unique_prop_names_cb, cont->name, (void*) 0); - - ycoo= yco; - yco= draw_controllerbuttons(cont, block, xco, yco, width); - if(yco-6 < ycoo) ycoo= (yco+ycoo-20)/2; - } - else { - cpack(0x999999); - glRecti(xco+22, yco, xco+width-22,yco+19); - but= uiDefBut(block, LABEL, 0, controller_name(cont->type), (short)(xco+22), yco, 100, 19, cont, 0, 0, 0, 0, "Controller type"); - uiButSetFunc(but, sca_move_controller, cont, NULL); - but= uiDefBut(block, LABEL, 0, cont->name,(short)(xco+122), yco,(short)(width-144), 19, cont, 0, 0, 0, 0, "Controller name"); - uiButSetFunc(but, sca_move_controller, cont, NULL); + if(ob->scaflag & OB_SHOWSENS) { + + sens= ob->sensors.first; + while(sens) { + if (!(G.buts->scaflag & BUTS_SENS_STATE) || + sens->totlinks == 0 || /* always display sensor without links so that is can be edited */ + is_sensor_linked(block, sens)) { + sens->flag |= SENS_VISIBLE; + uiBlockSetEmboss(block, UI_EMBOSSM); + uiDefIconButBitS(block, TOG, SENS_DEL, B_DEL_SENS, ICON_X, xco, yco, 22, 19, &sens->flag, 0, 0, 0, 0, "Delete Sensor"); + uiDefIconButBitS(block, ICONTOG, SENS_SHOW, B_REDR, ICON_RIGHTARROW, (short)(xco+width-22), yco, 22, 19, &sens->flag, 0, 0, 0, 0, "Sensor settings"); + ycoo= yco; + if(sens->flag & SENS_SHOW) + { + uiDefButS(block, MENU, B_CHANGE_SENS, sensor_pup(), (short)(xco+22), yco, 100, 19, &sens->type, 0, 0, 0, 0, "Sensor type"); + but= uiDefBut(block, TEX, 1, "", (short)(xco+122), yco, (short)(width-144), 19, sens->name, 0, 31, 0, 0, "Sensor name"); + uiButSetFunc(but, make_unique_prop_names_cb, sens->name, (void*) 0); + + sens->otype= sens->type; + yco= draw_sensorbuttons(sens, block, xco, yco, width,ob->id.name); + if(yco-6 < ycoo) ycoo= (yco+ycoo-20)/2; + } + else { + set_col_sensor(sens->type, 1); + glRecti(xco+22, yco, xco+width-22,yco+19); + but= uiDefBut(block, LABEL, 0, sensor_name(sens->type), (short)(xco+22), yco, 100, 19, sens, 0, 0, 0, 0, ""); + uiButSetFunc(but, sca_move_sensor, sens, NULL); + but= uiDefBut(block, LABEL, 0, sens->name, (short)(xco+122), yco, (short)(width-144), 19, sens, 0, 31, 0, 0, ""); + uiButSetFunc(but, sca_move_sensor, sens, NULL); + } + + but= uiDefIconBut(block, LINK, 0, ICON_LINK, (short)(xco+width), ycoo, 19, 19, NULL, 0, 0, 0, 0, ""); + uiSetButLink(but, NULL, (void ***)&(sens->links), &sens->totlinks, LINK_SENSOR, LINK_CONTROLLER); + + yco-=20; } - - but= uiDefIconBut(block, LINK, 0, ICON_LINK, (short)(xco+width), ycoo, 19, 19, NULL, 0, 0, 0, 0, ""); - uiSetButLink(but, NULL, (void ***)&(cont->links), &cont->totlinks, LINK_CONTROLLER, LINK_ACTUATOR); - - uiDefIconBut(block, INLINK, 0, ICON_INLINK,(short)(xco-19), ycoo, 19, 19, cont, LINK_CONTROLLER, 0, 0, 0, ""); - - yco-=20; - - cont= cont->next; + sens= sens->next; } yco-= 6; } } - + /* ******************************* */ - xco= 985; yco= 170; width= 280; + xco= 1040; yco= 170; width= 280; uiBlockSetEmboss(block, UI_EMBOSSP); - uiDefBlockBut(block, actuator_menu, NULL, "Actuators", xco-10, yco+35, 100, 19, ""); + uiDefBlockBut(block, actuator_menu, NULL, "Actuators", xco-10, yco+35, 90, 19, ""); uiBlockSetEmboss(block, UI_EMBOSS); uiBlockBeginAlign(block); - uiDefButBitS(block, TOG, BUTS_ACT_SEL, B_REDR, "Sel", xco+110, yco+35, (width-110)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show all selected Objects"); - uiDefButBitS(block, TOG, BUTS_ACT_ACT, B_REDR, "Act", xco+110+(width-110)/3, yco+35, (width-110)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show active Object"); - uiDefButBitS(block, TOG, BUTS_ACT_LINK, B_REDR, "Link", xco+110+2*(width-110)/3, yco+35, (width-110)/3, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show linked Objects to Controller"); + uiDefButBitS(block, TOG, BUTS_ACT_SEL, B_REDR, "Sel", xco+110, yco+35, (width-100)/4, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show all selected Objects"); + uiDefButBitS(block, TOG, BUTS_ACT_ACT, B_REDR, "Act", xco+110+(width-100)/4, yco+35, (width-100)/4, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show active Object"); + uiDefButBitS(block, TOG, BUTS_ACT_LINK, B_REDR, "Link", xco+110+2*(width-100)/4, yco+35, (width-100)/4, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show linked Objects to Controller"); + uiDefButBitS(block, TOG, BUTS_ACT_STATE, B_REDR, "Sta", xco+110+3*(width-100)/4, yco+35, (width-100)/4, 19, &G.buts->scaflag, 0, 0, 0, 0, "Show only actuators connected to active states"); uiBlockEndAlign(block); for(a=0; a<count; a++) { ob= (Object *)idar[a]; @@ -2847,34 +3347,38 @@ void logic_buts(void) act= ob->actuators.first; while(act) { - uiBlockSetEmboss(block, UI_EMBOSSM); - uiDefIconButBitS(block, TOG, ACT_DEL, B_DEL_ACT, ICON_X, xco, yco, 22, 19, &act->flag, 0, 0, 0, 0, "Delete Actuator"); - uiDefIconButBitS(block, ICONTOG, ACT_SHOW, B_REDR, ICON_RIGHTARROW, (short)(xco+width-22), yco, 22, 19, &act->flag, 0, 0, 0, 0, "Actuator settings"); + if (!(G.buts->scaflag & BUTS_ACT_STATE) || + !(act->flag & ACT_LINKED) || /* always display actuators without links so that is can be edited */ + (act->flag & ACT_VISIBLE)) { /* this actuator has visible connection, display it */ + act->flag |= ACT_VISIBLE; /* mark the actuator as visible to help implementing the up/down action */ + uiBlockSetEmboss(block, UI_EMBOSSM); + uiDefIconButBitS(block, TOG, ACT_DEL, B_DEL_ACT, ICON_X, xco, yco, 22, 19, &act->flag, 0, 0, 0, 0, "Delete Actuator"); + uiDefIconButBitS(block, ICONTOG, ACT_SHOW, B_REDR, ICON_RIGHTARROW, (short)(xco+width-22), yco, 22, 19, &act->flag, 0, 0, 0, 0, "Actuator settings"); + + if(act->flag & ACT_SHOW) { + act->otype= act->type; + uiDefButS(block, MENU, B_CHANGE_ACT, actuator_pup(ob), (short)(xco+22), yco, 100, 19, &act->type, 0, 0, 0, 0, "Actuator type"); + but= uiDefBut(block, TEX, 1, "", (short)(xco+122), yco, (short)(width-144), 19, act->name, 0, 31, 0, 0, "Actuator name"); + uiButSetFunc(but, make_unique_prop_names_cb, act->name, (void*) 0); + + ycoo= yco; + yco= draw_actuatorbuttons(ob, act, block, xco, yco, width); + if(yco-6 < ycoo) ycoo= (yco+ycoo-20)/2; + } + else { + set_col_actuator(act->type, 1); + glRecti((short)(xco+22), yco, (short)(xco+width-22),(short)(yco+19)); + but= uiDefBut(block, LABEL, 0, actuator_name(act->type), (short)(xco+22), yco, 100, 19, act, 0, 0, 0, 0, "Actuator type"); + uiButSetFunc(but, sca_move_actuator, act, NULL); + but= uiDefBut(block, LABEL, 0, act->name, (short)(xco+122), yco, (short)(width-144), 19, act, 0, 0, 0, 0, "Actuator name"); + uiButSetFunc(but, sca_move_actuator, act, NULL); + ycoo= yco; + } - if(act->flag & ACT_SHOW) { - act->otype= act->type; - uiDefButS(block, MENU, B_CHANGE_ACT, actuator_pup(ob), (short)(xco+22), yco, 100, 19, &act->type, 0, 0, 0, 0, "Actuator type"); - but= uiDefBut(block, TEX, 1, "", (short)(xco+122), yco, (short)(width-144), 19, act->name, 0, 31, 0, 0, "Actuator name"); - uiButSetFunc(but, make_unique_prop_names_cb, act->name, (void*) 0); + uiDefIconBut(block, INLINK, 0, ICON_INLINK,(short)(xco-19), ycoo, 19, 19, act, LINK_ACTUATOR, 0, 0, 0, ""); - ycoo= yco; - yco= draw_actuatorbuttons(act, block, xco, yco, width); - if(yco-6 < ycoo) ycoo= (yco+ycoo-20)/2; + yco-=20; } - else { - set_col_actuator(act->type, 1); - glRecti((short)(xco+22), yco, (short)(xco+width-22),(short)(yco+19)); - but= uiDefBut(block, LABEL, 0, actuator_name(act->type), (short)(xco+22), yco, 100, 19, act, 0, 0, 0, 0, "Actuator type"); - uiButSetFunc(but, sca_move_actuator, act, NULL); - but= uiDefBut(block, LABEL, 0, act->name, (short)(xco+122), yco, (short)(width-144), 19, act, 0, 0, 0, 0, "Actuator name"); - uiButSetFunc(but, sca_move_actuator, act, NULL); - ycoo= yco; - } - - uiDefIconBut(block, INLINK, 0, ICON_INLINK,(short)(xco-19), ycoo, 19, 19, act, LINK_ACTUATOR, 0, 0, 0, ""); - - yco-=20; - act= act->next; } yco-= 6; |