diff options
Diffstat (limited to 'source')
-rw-r--r-- | source/blender/bmesh/tools/bmesh_bevel.c | 144 |
1 files changed, 112 insertions, 32 deletions
diff --git a/source/blender/bmesh/tools/bmesh_bevel.c b/source/blender/bmesh/tools/bmesh_bevel.c index 2f471bf0b81..55c63a13efb 100644 --- a/source/blender/bmesh/tools/bmesh_bevel.c +++ b/source/blender/bmesh/tools/bmesh_bevel.c @@ -451,6 +451,16 @@ static bool nearly_parallel_normalized(const float d1[3], const float d2[3]) return compare_ff(fabsf(direction_dot), 1.0f, BEVEL_EPSILON_ANG_DOT); } +/** + * calculate the determinant of a matrix formed by three vectors + * \return dot(a, cross(b, c)) = determinant(a, b, c) + */ +static float determinant_v3v3v3(const float a[3], const float b[3], const float c[3]) +{ + return a[0] * b[1] * c[2] + a[1] * b[2] * c[0] + a[2] * b[0] * c[1] - a[0] * b[2] * c[1] - + a[1] * b[0] * c[2] - a[2] * b[1] * c[0]; +} + /* Make a new BoundVert of the given kind, inserting it at the end of the circular linked * list with entry point bv->boundstart, and return it. */ static BoundVert *add_new_bound_vert(MemArena *mem_arena, VMesh *vm, const float co[3]) @@ -4118,44 +4128,114 @@ static VMesh *cubic_subdiv(BevelParams *bp, VMesh *vm_in) VMesh *vm_out = new_adj_vmesh(bp->mem_arena, n_boundary, ns_out, vm_in->boundstart); /* First we adjust the boundary vertices of the input mesh, storing in output mesh. */ + BoundVert *bndv = vm_in->boundstart; for (int i = 0; i < n_boundary; i++) { + float co1[3], co2[3], acc[3]; + EdgeHalf *e = bndv->elast; + /* Generate tangents. This is hacked together and would ideally be done elsewere and then only + * used here. */ + float tangent[3], tangent2[3], normal[3]; + bool convex = true; + bool orthogonal = false; + float stretch = 0.0f; + if (e) { + /* Projection direction is direction of the edge. */ + sub_v3_v3v3(tangent, e->e->v1->co, e->e->v2->co); + if (e->is_rev) { + negate_v3(tangent); + } + normalize_v3(tangent); + if (bndv->is_arc_start || bndv->is_patch_start) { + BMFace *face = e->fnext; + if (face) { + copy_v3_v3(normal, face->no); + } + else { + zero_v3(normal); + } + madd_v3_v3v3fl(co2, bndv->profile.middle, normal, 0.1f); + } + if (bndv->is_arc_start || bp->affect_type == BEVEL_AFFECT_VERTICES) { + EdgeHalf *e1 = bndv->next->elast; + BLI_assert(e1); + sub_v3_v3v3(tangent2, e1->e->v1->co, e1->e->v2->co); + if (e1->is_rev) { + negate_v3(tangent2); + } + normalize_v3(tangent2); + + convex = determinant_v3v3v3(tangent2, tangent, normal) < 0; + + add_v3_v3(tangent2, tangent); + normalize_v3(tangent2); + copy_v3_v3(tangent, tangent2); + } + /* Calculate a factor which determines how much the interpolated mesh is + * going to be stretched out into the direction of the tangent. + * It is currently using the difference along the tangent of the + * central point on the profile and the current center vertex position. */ + get_profile_point(bp, &bndv->profile, ns_in2, ns_in, co); + stretch = dot_v3v3(tangent, mesh_vert(vm_in, i, ns_in2, ns_in2)->co) - dot_v3v3(tangent, co); + stretch = fabsf(stretch); + /* Scale the tangent by stretch. The divide by ns_in2 comes from the Levin Paper. */ + mul_v3_fl(tangent, stretch / ns_in2); + orthogonal = bndv->is_patch_start; + } + else if (bndv->prev->is_patch_start) { + /* If this is the second edge of a patch and therefore #e is NULL, + * then e->fprev has to be used/not NULL. */ + BLI_assert(bndv->prev->elast); + BMFace *face = bndv->prev->elast->fnext; + if (face) { + copy_v3_v3(normal, face->no); + } + else { + zero_v3(normal); + } + orthogonal = true; + } + else { + /** Should only come here from make_cube_corner_adj_vmesh. */ + sub_v3_v3v3(co1, mesh_vert(vm_in, i, 0, 0)->co, mesh_vert(vm_in, i, 0, 1)->co); + sub_v3_v3v3(co2, mesh_vert(vm_in, i, 0, 1)->co, mesh_vert(vm_in, i, 0, 2)->co); + cross_v3_v3v3(tangent, co1, co2); + /** The following constant is choosen to best match the old results. */ + normalize_v3_length(tangent, 1.5f / ns_out); + } + /** Copy corner vertex. */ copy_v3_v3(mesh_vert(vm_out, i, 0, 0)->co, mesh_vert(vm_in, i, 0, 0)->co); + /** Copy the rest of the boundary vertices. */ for (int k = 1; k < ns_in; k++) { copy_v3_v3(co, mesh_vert(vm_in, i, 0, k)->co); - /* Smooth boundary rule. Custom profiles shouldn't be smoothed. */ - if (bp->profile_type != BEVEL_PROFILE_CUSTOM) { - float co1[3], co2[3], acc[3]; - copy_v3_v3(co1, mesh_vert(vm_in, i, 0, k - 1)->co); - copy_v3_v3(co2, mesh_vert(vm_in, i, 0, k + 1)->co); - - add_v3_v3v3(acc, co1, co2); - madd_v3_v3fl(acc, co, -2.0f); - madd_v3_v3fl(co, acc, -1.0f / 6.0f); - } + copy_v3_v3(co1, mesh_vert(vm_in, i, 0, k - 1)->co); + copy_v3_v3(co2, mesh_vert(vm_in, i, 0, k + 1)->co); + + add_v3_v3v3(acc, co1, co2); + if (bndv->is_arc_start) { + sub_v3_v3(co1, co); + sub_v3_v3(co2, co); + normalize_v3(co1); + normalize_v3(co2); + add_v3_v3v3(tangent, co1, co2); + /* This is an empirical formula to make the result look good. */ + normalize_v3(tangent); + float dot = convex ? fminf(0, dot_v3v3(tangent2, tangent)) : 1.0f; + mul_v3_fl(tangent, stretch / ns_in * dot); + } + else if (orthogonal) { + sub_v3_v3(co1, co); + cross_v3_v3v3(tangent, normal, co1); + /* This is an empirical formula to make the result look good. */ + normalize_v3_length(tangent, -bp->offset * 0.7071f / ns_in); + } + mul_v3_fl(co, 2.0f); + madd_v3_v3fl(co, acc, -0.25f); + madd_v3_v3fl(co, mesh_vert(vm_in, i, 1, k)->co, -0.5f); + add_v3_v3(co, tangent); copy_v3_v3(mesh_vert_canon(vm_out, i, 0, 2 * k)->co, co); } - } - /* Now adjust odd boundary vertices in output mesh, based on even ones. */ - BoundVert *bndv = vm_out->boundstart; - for (int i = 0; i < n_boundary; i++) { - for (int k = 1; k < ns_out; k += 2) { - get_profile_point(bp, &bndv->profile, k, ns_out, co); - - /* Smooth if using a non-custom profile. */ - if (bp->profile_type != BEVEL_PROFILE_CUSTOM) { - float co1[3], co2[3], acc[3]; - copy_v3_v3(co1, mesh_vert_canon(vm_out, i, 0, k - 1)->co); - copy_v3_v3(co2, mesh_vert_canon(vm_out, i, 0, k + 1)->co); - - add_v3_v3v3(acc, co1, co2); - madd_v3_v3fl(acc, co, -2.0f); - madd_v3_v3fl(co, acc, -1.0f / 6.0f); - } - - copy_v3_v3(mesh_vert_canon(vm_out, i, 0, k)->co, co); - } bndv = bndv->next; } vmesh_copy_equiv_verts(vm_out); @@ -4163,7 +4243,7 @@ static VMesh *cubic_subdiv(BevelParams *bp, VMesh *vm_in) /* Copy adjusted verts back into vm_in. */ for (int i = 0; i < n_boundary; i++) { for (int k = 0; k < ns_in; k++) { - copy_v3_v3(mesh_vert(vm_in, i, 0, k)->co, mesh_vert(vm_out, i, 0, 2 * k)->co); + copy_v3_v3(mesh_vert_canon(vm_in, i, 0, k)->co, mesh_vert_canon(vm_out, i, 0, 2 * k)->co); } } @@ -4248,7 +4328,7 @@ static VMesh *cubic_subdiv(BevelParams *bp, VMesh *vm_in) vmesh_copy_equiv_verts(vm_out); /* The center vertex is special. */ - gamma = sabin_gamma(n_boundary); + gamma = sabin_gamma(n_boundary) * 0.5f; beta = -gamma; /* Accumulate edge verts in co1, face verts in co2. */ float co1[3], co2[3]; |