diff options
Diffstat (limited to 'source')
31 files changed, 107 insertions, 106 deletions
diff --git a/source/blender/blenkernel/BKE_ccg.h b/source/blender/blenkernel/BKE_ccg.h index 597d6498d99..6d39d42bde5 100644 --- a/source/blender/blenkernel/BKE_ccg.h +++ b/source/blender/blenkernel/BKE_ccg.h @@ -38,11 +38,11 @@ struct CCGSubSurf; /* Each CCGElem is CCGSubSurf's representation of a subdivided - vertex. All CCGElems in a particular CCGSubSurf have the same - layout, but the layout can vary from one CCGSubSurf to another. For - this reason, CCGElem is presented as an opaque pointer, and - elements should always be accompanied by a CCGKey, which provides - the necessary offsets to access components of a CCGElem. + * vertex. All CCGElems in a particular CCGSubSurf have the same + * layout, but the layout can vary from one CCGSubSurf to another. For + * this reason, CCGElem is presented as an opaque pointer, and + * elements should always be accompanied by a CCGKey, which provides + * the necessary offsets to access components of a CCGElem. */ typedef struct CCGElem CCGElem; @@ -50,7 +50,7 @@ typedef struct CCGKey { int level; /* number of bytes in each element (one float per layer, plus - three floats for normals if enabled) */ + * three floats for normals if enabled) */ int elem_size; /* number of elements along each side of grid */ @@ -61,11 +61,11 @@ typedef struct CCGKey { int grid_bytes; /* currently always the last three floats, unless normals are - disabled */ + * disabled */ int normal_offset; /* offset in bytes of mask value; only valid if 'has_mask' is - true */ + * true */ int mask_offset; int num_layers; diff --git a/source/blender/blenkernel/BKE_customdata.h b/source/blender/blenkernel/BKE_customdata.h index b39ea7cca02..bbe68db8bfe 100644 --- a/source/blender/blenkernel/BKE_customdata.h +++ b/source/blender/blenkernel/BKE_customdata.h @@ -261,8 +261,8 @@ void CustomData_bmesh_set(const struct CustomData *data, void *block, int type, void CustomData_bmesh_set_n(struct CustomData *data, void *block, int type, int n, void *source); -/*sets the data of the block at physical layer n. no real type checking - *is performed. +/* sets the data of the block at physical layer n. no real type checking + * is performed. */ void CustomData_bmesh_set_layer_n(struct CustomData *data, void *block, int n, void *source); diff --git a/source/blender/blenkernel/intern/CCGSubSurf.c b/source/blender/blenkernel/intern/CCGSubSurf.c index abbd4bf64bc..6f768a147f7 100644 --- a/source/blender/blenkernel/intern/CCGSubSurf.c +++ b/source/blender/blenkernel/intern/CCGSubSurf.c @@ -3127,7 +3127,7 @@ void CCG_key(CCGKey *key, const CCGSubSurf *ss, int level) key->num_layers = ss->meshIFC.numLayers; /* if normals are present, always the last three floats of an - element */ + * element */ if (key->has_normals) key->normal_offset = key->elem_size - sizeof(float) * 3; else diff --git a/source/blender/blenkernel/intern/cloth.c b/source/blender/blenkernel/intern/cloth.c index 0e81b503cbf..b38f0f78cdb 100644 --- a/source/blender/blenkernel/intern/cloth.c +++ b/source/blender/blenkernel/intern/cloth.c @@ -92,7 +92,7 @@ static CM_SOLVER_DEF solvers [] = /* ********** cloth engine ******* */ /* Prototypes for internal functions. -*/ + */ static void cloth_to_object (Object *ob, ClothModifierData *clmd, float (*vertexCos)[3]); static void cloth_from_mesh ( ClothModifierData *clmd, DerivedMesh *dm ); static int cloth_from_object(Object *ob, ClothModifierData *clmd, DerivedMesh *dm, float framenr, int first); @@ -101,10 +101,10 @@ static void cloth_apply_vgroup ( ClothModifierData *clmd, DerivedMesh *dm ); /****************************************************************************** -* -* External interface called by modifier.c clothModifier functions. -* -******************************************************************************/ + * + * External interface called by modifier.c clothModifier functions. + * + ******************************************************************************/ /** * cloth_init - creates a new cloth simulation. * @@ -145,8 +145,8 @@ void cloth_init(ClothModifierData *clmd ) clmd->coll_parms->selfepsilon = 0.75; /* These defaults are copied from softbody.c's - * softbody_calc_forces() function. - */ + * softbody_calc_forces() function. + */ clmd->sim_parms->eff_force_scale = 1000.0; clmd->sim_parms->eff_wind_scale = 250.0; @@ -476,7 +476,7 @@ static DerivedMesh *cloth_to_triangles(DerivedMesh *dm) /************************************************ * clothModifier_do - main simulation function -************************************************/ + ************************************************/ void clothModifier_do(ClothModifierData *clmd, Scene *scene, Object *ob, DerivedMesh *dm, float (*vertexCos)[3]) { PointCache *cache; @@ -729,10 +729,10 @@ void cloth_free_modifier_extern(ClothModifierData *clmd ) } /****************************************************************************** -* -* Internal functions. -* -******************************************************************************/ + * + * Internal functions. + * + ******************************************************************************/ /** * cloth_to_object - copies the deformed vertices to the object. @@ -978,16 +978,16 @@ static void cloth_from_mesh ( ClothModifierData *clmd, DerivedMesh *dm ) memcpy ( &clmd->clothObject->mfaces[i], &mface[i], sizeof ( MFace ) ); /* Free the springs since they can't be correct if the vertices - * changed. - */ + * changed. + */ if ( clmd->clothObject->springs != NULL ) MEM_freeN ( clmd->clothObject->springs ); } /*************************************************************************************** -* SPRING NETWORK BUILDING IMPLEMENTATION BEGIN -***************************************************************************************/ + * SPRING NETWORK BUILDING IMPLEMENTATION BEGIN + ***************************************************************************************/ // be careful: implicit solver has to be resettet when using this one! // --> only for implicit handling of this spring! @@ -1276,6 +1276,6 @@ static int cloth_build_springs ( ClothModifierData *clmd, DerivedMesh *dm ) } /* cloth_build_springs */ /*************************************************************************************** -* SPRING NETWORK BUILDING IMPLEMENTATION END -***************************************************************************************/ + * SPRING NETWORK BUILDING IMPLEMENTATION END + ***************************************************************************************/ diff --git a/source/blender/blenkernel/intern/curve.c b/source/blender/blenkernel/intern/curve.c index 54bc4c742fb..6a0991cf4e5 100644 --- a/source/blender/blenkernel/intern/curve.c +++ b/source/blender/blenkernel/intern/curve.c @@ -2047,7 +2047,7 @@ static void make_bevel_list_3D_minimum_twist(BevList *bl) normalize_v3(vec_2); /* align the vector, can avoid this and it looks 98% OK but - * better to align the angle quat roll's before comparing */ + * better to align the angle quat roll's before comparing */ { cross_v3_v3v3(cross_tmp, bevp_last->dir, bevp_first->dir); angle = angle_normalized_v3v3(bevp_first->dir, bevp_last->dir); diff --git a/source/blender/blenkernel/intern/deform.c b/source/blender/blenkernel/intern/deform.c index 19e7eb9dce1..0396733760f 100644 --- a/source/blender/blenkernel/intern/deform.c +++ b/source/blender/blenkernel/intern/deform.c @@ -275,8 +275,8 @@ void defvert_flip_merged(MDeformVert *dvert, const int *flip_map, const int flip dw = &dvert->dw[i]; /* in case array got realloced */ /* distribute weights: if only one of the vertex groups was - * assigned this will halve the weights, otherwise it gets - * evened out. this keeps it proportional to other groups */ + * assigned this will halve the weights, otherwise it gets + * evened out. this keeps it proportional to other groups */ weight = 0.5f * (dw_cpy->weight + dw->weight); dw_cpy->weight = weight; dw->weight = weight; diff --git a/source/blender/blenkernel/intern/depsgraph.c b/source/blender/blenkernel/intern/depsgraph.c index 31d2ef9175b..edef2b1a662 100644 --- a/source/blender/blenkernel/intern/depsgraph.c +++ b/source/blender/blenkernel/intern/depsgraph.c @@ -1253,7 +1253,7 @@ DagNodeQueue *graph_dfs(void) int maxpos = 0; /* int is_cycle = 0; */ /* UNUSED */ /* - *fprintf(stderr, "starting DFS\n ------------\n"); + *fprintf(stderr, "starting DFS\n ------------\n"); */ nqueue = queue_create(DAGQUEUEALLOC); retqueue = queue_create(MainDag->numNodes); diff --git a/source/blender/blenkernel/intern/dynamicpaint.c b/source/blender/blenkernel/intern/dynamicpaint.c index bbd57a5478b..2a2451c4ac9 100644 --- a/source/blender/blenkernel/intern/dynamicpaint.c +++ b/source/blender/blenkernel/intern/dynamicpaint.c @@ -140,7 +140,7 @@ typedef struct VolumeGrid { int *s_pos; /* (x*y*z) t_index begin id */ int *s_num; /* (x*y*z) number of t_index points */ int *t_index; /* actual surface point index, - access: (s_pos+s_num) */ + * access: (s_pos+s_num) */ } VolumeGrid; typedef struct Vec3f { @@ -192,7 +192,7 @@ typedef struct PaintUVPoint { unsigned int v1, v2, v3; /* vertex indexes */ unsigned int neighbour_pixel; /* If this pixel isn't uv mapped to any face, - but it's neighboring pixel is */ + * but it's neighboring pixel is */ short quad; } PaintUVPoint; @@ -205,9 +205,9 @@ typedef struct ImgSeqFormatData { #define ADJ_ON_MESH_EDGE (1 << 0) typedef struct PaintAdjData { - int *n_target; /* array of neighboring point indexes, - for single sample use (n_index+neigh_num) */ - int *n_index; /* index to start reading n_target for each point */ + int *n_target; /* array of neighboring point indexes, + * for single sample use (n_index + neigh_num) */ + int *n_index; /* index to start reading n_target for each point */ int *n_num; /* num of neighs for each point */ int *flags; /* vertex adjacency flags */ int total_targets; /* size of n_target */ @@ -2540,8 +2540,8 @@ int dynamicPaint_createUVSurface(DynamicPaintSurface *surface) #if 0 /* ----------------------------------------------------------------- - * For debug, output pixel statuses to the color map - * -----------------------------------------------------------------*/ + * For debug, output pixel statuses to the color map + * -----------------------------------------------------------------*/ #pragma omp parallel for schedule(static) for (index = 0; index < sData->total_points; index++) { @@ -3293,7 +3293,7 @@ static int dynamicPaint_paintMesh(DynamicPaintSurface *surface, int f_index = hit.index; /* Also cast a ray in opposite direction to make sure - * point is at least surrounded by two brush faces */ + * point is at least surrounded by two brush faces */ negate_v3(ray_dir); hit.index = -1; hit.dist = 9999; diff --git a/source/blender/blenkernel/intern/multires.c b/source/blender/blenkernel/intern/multires.c index bd9972b62e6..4e8b67bd55b 100644 --- a/source/blender/blenkernel/intern/multires.c +++ b/source/blender/blenkernel/intern/multires.c @@ -600,7 +600,7 @@ static void multires_copy_dm_grid(CCGElem *gridA, CCGElem *gridB, CCGKey *keyA, } /* Reallocate gpm->data at a lower resolution and copy values over - from the original high-resolution data */ + * from the original high-resolution data */ static void multires_grid_paint_mask_downsample(GridPaintMask *gpm, int level) { if (level < gpm->level) { @@ -1092,7 +1092,7 @@ static void multiresModifier_disp_run(DerivedMesh *dm, Mesh *me, DerivedMesh *dm break; case CALC_DISPLACEMENTS: /* Calculate displacement between new and old - * grid points and convert to tangent space */ + * grid points and convert to tangent space */ sub_v3_v3v3(disp, co, sco); invert_m3(mat); mul_v3_m3v3(data, mat, disp); @@ -1481,7 +1481,7 @@ DerivedMesh *multires_make_derived_from_derived(DerivedMesh *dm, } /**** Old Multires code **** -***************************/ + ***************************/ /* Adapted from sculptmode.c */ void old_mdisps_bilinear(float out[3], float (*disps)[3], const int st, float u, float v) diff --git a/source/blender/blenkernel/intern/softbody.c b/source/blender/blenkernel/intern/softbody.c index a66b8a1a373..1041fb12305 100644 --- a/source/blender/blenkernel/intern/softbody.c +++ b/source/blender/blenkernel/intern/softbody.c @@ -3233,9 +3233,9 @@ static void springs_from_mesh(Object *ob) sb= ob->soft; if (me && sb) { /* using bp->origS as a container for spring calcualtions here - ** will be overwritten sbObjectStep() to receive - ** actual modifier stack positions - */ + * will be overwritten sbObjectStep() to receive + * actual modifier stack positions + */ if (me->totvert) { bp= ob->soft->bpoint; for (a=0; a<me->totvert; a++, bp++) { @@ -3283,10 +3283,10 @@ static void mesh_to_softbody(Scene *scene, Object *ob) for (a=0; a<me->totvert; a++, bp++) { /* get scalar values needed *per vertex* from vertex group functions, - so we can *paint* them nicly .. - they are normalized [0.0..1.0] so may be we need amplitude for scale - which can be done by caller but still .. i'd like it to go this way - */ + * so we can *paint* them nicly .. + * they are normalized [0.0..1.0] so may be we need amplitude for scale + * which can be done by caller but still .. i'd like it to go this way + */ if ((ob->softflag & OB_SB_GOAL) && sb->vertgroup) { /* even this is a deprecated evil hack */ /* I'd like to have it .. if (sb->namedVG_Goal[0]) */ @@ -3306,8 +3306,8 @@ static void mesh_to_softbody(Scene *scene, Object *ob) } /* to proove the concept - this enables per vertex *mass painting* - */ + * this enables per vertex *mass painting* + */ if (sb->namedVG_Mass[0]) { int grp= defgroup_name_index (ob, sb->namedVG_Mass); @@ -3411,9 +3411,9 @@ static void reference_to_scratch(Object *ob) } /* -helper function to get proper spring length -when object is rescaled -*/ + * helper function to get proper spring length + * when object is rescaled + */ static float globallen(float *v1, float *v2, Object *ob) { float p1[3], p2[3]; @@ -3793,7 +3793,7 @@ static void softbody_update_positions(Object *ob, SoftBody *sb, float (*vertexCo /* vertexCos came from local world, go global */ mul_m4_v3(ob->obmat, bp->origE); /* just to be save give bp->origT a defined value - will be calulated in interpolate_exciter()*/ + * will be calulated in interpolate_exciter()*/ copy_v3_v3(bp->origT, bp->origE); } } diff --git a/source/blender/blenkernel/intern/subsurf_ccg.c b/source/blender/blenkernel/intern/subsurf_ccg.c index 2a92992cb9f..19edcf6ac64 100644 --- a/source/blender/blenkernel/intern/subsurf_ccg.c +++ b/source/blender/blenkernel/intern/subsurf_ccg.c @@ -1045,7 +1045,7 @@ void subsurf_copy_grid_hidden(DerivedMesh *dm, const MPoly *mpoly, } /* Translate GridPaintMask into vertex paint masks. Assumes vertices - are in the order output by ccgDM_copyFinalVertArray. */ + * are in the order output by ccgDM_copyFinalVertArray. */ void subsurf_copy_grid_paint_mask(DerivedMesh *dm, const MPoly *mpoly, float *paint_mask, const GridPaintMask *grid_paint_mask) diff --git a/source/blender/blenloader/intern/readfile.c b/source/blender/blenloader/intern/readfile.c index c76261418f8..b6e9c701a83 100644 --- a/source/blender/blenloader/intern/readfile.c +++ b/source/blender/blenloader/intern/readfile.c @@ -7425,8 +7425,8 @@ static void do_versions(FileData *fd, Library *lib, Main *main) Brush *brush; /* For weight paint, each brush now gets its own weight; - unified paint settings also have weight. Update unified - paint settings and brushes with a default weight value. */ + * unified paint settings also have weight. Update unified + * paint settings and brushes with a default weight value. */ for (scene = main->scene.first; scene; scene = scene->id.next) { ToolSettings *ts = scene->toolsettings; diff --git a/source/blender/bmesh/intern/bmesh_opdefines.c b/source/blender/bmesh/intern/bmesh_opdefines.c index b5e6d7e1f68..4186f5d47eb 100644 --- a/source/blender/bmesh/intern/bmesh_opdefines.c +++ b/source/blender/bmesh/intern/bmesh_opdefines.c @@ -1159,7 +1159,7 @@ static BMOpDefine bmo_vertex_slide_def = { * 'unused_geom' slot will contain all interior geometry that is * completely unused. Lastly, 'holes_geom' contains edges and faces * that were in the input and are part of the hull. -*/ + */ static BMOpDefine bmo_convex_hull_def = { "convex_hull", {{BMO_OP_SLOT_ELEMENT_BUF, "input"}, diff --git a/source/blender/bmesh/operators/bmo_hull.c b/source/blender/bmesh/operators/bmo_hull.c index 2a48a531566..160db7cba75 100644 --- a/source/blender/bmesh/operators/bmo_hull.c +++ b/source/blender/bmesh/operators/bmo_hull.c @@ -509,7 +509,7 @@ static void hull_remove_overlapping(BMesh *bm, GHash *hull_triangles, BMEdge *e; /* Check that all the face's edges are on the hull, - otherwise can't reuse it */ + * otherwise can't reuse it */ f_on_hull = TRUE; BM_ITER_ELEM (e, &bm_iter2, f, BM_EDGES_OF_FACE) { if (!hull_final_edges_lookup(final_edges, e->v1, e->v2)) { @@ -519,9 +519,10 @@ static void hull_remove_overlapping(BMesh *bm, GHash *hull_triangles, } /* Note: can't change ghash while iterating, so mark - with 'skip' flag rather than deleting triangles */ + * with 'skip' flag rather than deleting triangles */ if (BM_vert_in_face(f, t->v[1]) && - BM_vert_in_face(f, t->v[2]) && f_on_hull) { + BM_vert_in_face(f, t->v[2]) && f_on_hull) + { t->skip = TRUE; BMO_elem_flag_disable(bm, f, HULL_FLAG_INTERIOR_ELE); BMO_elem_flag_enable(bm, f, HULL_FLAG_HOLE); @@ -544,7 +545,7 @@ static void hull_mark_interior_elements(BMesh *bm, BMOperator *op, } /* Mark all input faces as interior, some may be unmarked in - hull_remove_overlapping() */ + * hull_remove_overlapping() */ BMO_ITER (f, &oiter, bm, op, "input", BM_FACE) { BMO_elem_flag_enable(bm, f, HULL_FLAG_INTERIOR_ELE); } @@ -559,9 +560,9 @@ static void hull_tag_unused(BMesh *bm, BMOperator *op) BMFace *f; /* Mark vertices, edges, and faces that are already marked - interior (i.e. were already part of the input, but not part of - the hull), but that aren't also used by elements outside the - input set */ + * interior (i.e. were already part of the input, but not part of + * the hull), but that aren't also used by elements outside the + * input set */ BMO_ITER (v, &oiter, bm, op, "input", BM_VERT) { if (BMO_elem_flag_test(bm, v, HULL_FLAG_INTERIOR_ELE)) { int del = TRUE; diff --git a/source/blender/editors/object/object_select.c b/source/blender/editors/object/object_select.c index 86823be09a4..3a932b58fd9 100644 --- a/source/blender/editors/object/object_select.c +++ b/source/blender/editors/object/object_select.c @@ -79,8 +79,8 @@ /************************ Exported **************************/ /* simple API for object selection, rather than just using the flag -* this takes into account the 'restrict selection in 3d view' flag. -* deselect works always, the restriction just prevents selection */ + * this takes into account the 'restrict selection in 3d view' flag. + * deselect works always, the restriction just prevents selection */ /* Note: send a NC_SCENE|ND_OB_SELECT notifier yourself! (or * or a NC_SCENE|ND_OB_VISIBLE in case of visibility toggling */ diff --git a/source/blender/editors/object/object_transform.c b/source/blender/editors/object/object_transform.c index 16f62f56505..2e21fe9cdfe 100644 --- a/source/blender/editors/object/object_transform.c +++ b/source/blender/editors/object/object_transform.c @@ -361,7 +361,7 @@ void OBJECT_OT_origin_clear(wmOperatorType *ot) /*************************** Apply Transformation ****************************/ /* use this when the loc/size/rot of the parent has changed but the children -* should stay in the same place, e.g. for apply-size-rot or object center */ + * should stay in the same place, e.g. for apply-size-rot or object center */ static void ignore_parent_tx(Main *bmain, Scene *scene, Object *ob) { Object workob; diff --git a/source/blender/editors/screen/screen_ops.c b/source/blender/editors/screen/screen_ops.c index 52e1f90606f..0d5aceb9870 100644 --- a/source/blender/editors/screen/screen_ops.c +++ b/source/blender/editors/screen/screen_ops.c @@ -2301,7 +2301,7 @@ static int area_join_modal(bContext *C, wmOperator *op, wmEvent *event) } else { /* we are back in the area previously selected for keeping - * we swap the areas if possible to allow user to choose */ + * we swap the areas if possible to allow user to choose */ if (jd->sa2 != NULL) { if (jd->sa1) jd->sa1->flag &= ~AREA_FLAG_DRAWJOINFROM; if (jd->sa2) jd->sa2->flag &= ~AREA_FLAG_DRAWJOINTO; diff --git a/source/blender/editors/sculpt_paint/paint_ops.c b/source/blender/editors/sculpt_paint/paint_ops.c index f8ed20430e7..368729723eb 100644 --- a/source/blender/editors/sculpt_paint/paint_ops.c +++ b/source/blender/editors/sculpt_paint/paint_ops.c @@ -238,7 +238,7 @@ static Brush *brush_tool_toggle(Main *bmain, Brush *brush_orig, const int tool, if (!brush_orig || brush_tool(brush_orig, tool_offset) != tool) { Brush *br; /* if the current brush is not using the desired tool, look - for one that is */ + * for one that is */ br = brush_tool_cycle(bmain, brush_orig, tool, tool_offset, ob_mode); /* store the previously-selected brush */ if (br) @@ -250,8 +250,8 @@ static Brush *brush_tool_toggle(Main *bmain, Brush *brush_orig, const int tool, BLI_findindex(bmain->brush.first, brush_orig->toggle_brush) != -1) { /* if current brush is using the desired tool, try to toggle - back to the previously selected brush (if it was set, and - if it still exists) */ + * back to the previously selected brush (if it was set, and + * if it still exists) */ return brush_orig->toggle_brush; } else diff --git a/source/blender/editors/sculpt_paint/sculpt.c b/source/blender/editors/sculpt_paint/sculpt.c index a124afddc8e..7e766ea3388 100644 --- a/source/blender/editors/sculpt_paint/sculpt.c +++ b/source/blender/editors/sculpt_paint/sculpt.c @@ -249,13 +249,13 @@ typedef struct StrokeCache { float view_normal[3]; /* sculpt_normal gets calculated by calc_sculpt_normal(), then the - sculpt_normal_symm gets updated quickly with the usual symmetry - transforms */ + * sculpt_normal_symm gets updated quickly with the usual symmetry + * transforms */ float sculpt_normal[3]; float sculpt_normal_symm[3]; /* Used for wrap texture mode, local_mat gets calculated by - calc_brush_local_mat() and used in tex_strength(). */ + * calc_brush_local_mat() and used in tex_strength(). */ float brush_local_mat[4][4]; float last_center[3]; @@ -792,7 +792,7 @@ static float tex_strength(SculptSession *ss, Brush *br, float point[3], } else if (mtex->brush_map_mode == MTEX_MAP_MODE_AREA) { /* Similar to fixed mode, but projects from brush angle - rather than view direction */ + * rather than view direction */ /* Rotation is handled by the brush_local_mat */ rotation = 0; @@ -916,7 +916,7 @@ static void calc_area_normal(Sculpt *sd, Object *ob, float an[3], PBVHNode **nod int n, original; /* Grab brush requires to test on original data (see r33888 and - bug #25371) */ + * bug #25371) */ original = (paint_brush(&sd->paint)->sculpt_tool == SCULPT_TOOL_GRAB ? TRUE : ss->cache->original); @@ -1095,7 +1095,7 @@ static void calc_brush_local_mat(const Brush *brush, Object *ob, mult_m4_m4m4(tmat, mat, scale); /* Return inverse (for converting from modelspace coords to local - area coords) */ + * area coords) */ invert_m4_m4(local_mat, tmat); } @@ -1112,7 +1112,7 @@ static void update_brush_local_mat(Sculpt *sd, Object *ob) } /* Test whether the StrokeCache.sculpt_normal needs update in - do_brush_action() */ + * do_brush_action() */ static int brush_needs_sculpt_normal(const Brush *brush) { return ((ELEM(brush->sculpt_tool, @@ -1176,8 +1176,8 @@ static void neighbor_average(SculptSession *ss, float avg[3], unsigned vert) } /* Similar to neighbor_average(), but returns an averaged mask value - instead of coordinate. Also does not restrict based on border or - corner vertices. */ + * instead of coordinate. Also does not restrict based on border or + * corner vertices. */ static float neighbor_average_mask(SculptSession *ss, unsigned vert) { const float *vmask = ss->vmask; @@ -4034,7 +4034,7 @@ void ED_sculpt_mask_layers_ensure(Object *ob, MultiresModifierData *mmd) paint_mask = CustomData_get_layer(&me->vdata, CD_PAINT_MASK); /* if multires is active, create a grid paint mask layer if there - isn't one already */ + * isn't one already */ if (mmd && !CustomData_has_layer(&me->ldata, CD_GRID_PAINT_MASK)) { GridPaintMask *gmask; int level = MAX2(1, mmd->sculptlvl); diff --git a/source/blender/gpu/intern/gpu_buffers.c b/source/blender/gpu/intern/gpu_buffers.c index 1e1043f1ee7..833aefc20aa 100644 --- a/source/blender/gpu/intern/gpu_buffers.c +++ b/source/blender/gpu/intern/gpu_buffers.c @@ -1269,8 +1269,8 @@ typedef struct { short no[3]; /* inserting this to align the 'color' field to a four-byte - boundary; drastically increases viewport performance on my - drivers (Gallium/Radeon) --nicholasbishop */ + * boundary; drastically increases viewport performance on my + * drivers (Gallium/Radeon) --nicholasbishop */ char pad[2]; unsigned char color[3]; diff --git a/source/blender/gpu/intern/gpu_extensions.c b/source/blender/gpu/intern/gpu_extensions.c index 32e4ff8d81c..f4d5812ffb7 100644 --- a/source/blender/gpu/intern/gpu_extensions.c +++ b/source/blender/gpu/intern/gpu_extensions.c @@ -894,7 +894,7 @@ void GPU_framebuffer_blur(GPUFrameBuffer *fb, GPUTexture *tex, GPUFrameBuffer *b /* Blurring horizontally */ /* We do the bind ourselves rather than using GPU_framebuffer_texture_bind() to avoid - pushing unnecessary matrices onto the OpenGL stack. */ + * pushing unnecessary matrices onto the OpenGL stack. */ glBindFramebufferEXT(GL_FRAMEBUFFER_EXT, blurfb->object); GPU_shader_bind(blur_shader); diff --git a/source/blender/imbuf/intern/tiff.c b/source/blender/imbuf/intern/tiff.c index a40378498a2..0c6a5b56a3e 100644 --- a/source/blender/imbuf/intern/tiff.c +++ b/source/blender/imbuf/intern/tiff.c @@ -64,8 +64,8 @@ /*********************** -* Local declarations. * -***********************/ + * Local declarations. * + ***********************/ /* Reading and writing of an in-memory TIFF file. */ static tsize_t imb_tiff_ReadProc(thandle_t handle, tdata_t data, tsize_t n); static tsize_t imb_tiff_WriteProc(thandle_t handle, tdata_t data, tsize_t n); @@ -87,8 +87,8 @@ typedef struct ImbTIFFMemFile { /***************************** -* Function implementations. * -*****************************/ + * Function implementations. * + *****************************/ static void imb_tiff_DummyUnmapProc(thandle_t fd, tdata_t base, toff_t size) diff --git a/source/blender/makesdna/DNA_meshdata_types.h b/source/blender/makesdna/DNA_meshdata_types.h index ff23b37ad0c..c3b0bc39388 100644 --- a/source/blender/makesdna/DNA_meshdata_types.h +++ b/source/blender/makesdna/DNA_meshdata_types.h @@ -189,9 +189,9 @@ typedef struct MDisps { float (*disps)[3]; /* Used for hiding parts of a multires mesh. Essentially the multires - equivalent of MVert.flag's ME_HIDE bit. - - This is a bitmap, keep in sync with type used in BLI_bitmap.h */ + * equivalent of MVert.flag's ME_HIDE bit. + * + * This is a bitmap, keep in sync with type used in BLI_bitmap.h */ unsigned int *hidden; } MDisps; diff --git a/source/blender/makesdna/DNA_scene_types.h b/source/blender/makesdna/DNA_scene_types.h index 9ba8fba15fb..83666068812 100644 --- a/source/blender/makesdna/DNA_scene_types.h +++ b/source/blender/makesdna/DNA_scene_types.h @@ -884,7 +884,7 @@ typedef struct ToolSettings { UvSculpt *uvsculpt; /* uv smooth */ /* Vertex group weight - used only for editmode, not weight - paint */ + * paint */ float vgroup_weight; /* Subdivide Settings */ diff --git a/source/blender/makesdna/intern/makesdna.c b/source/blender/makesdna/intern/makesdna.c index ae79e7b39b0..a74632ac2f8 100644 --- a/source/blender/makesdna/intern/makesdna.c +++ b/source/blender/makesdna/intern/makesdna.c @@ -701,7 +701,7 @@ static int arraysize(char *astr, int len) else if (str[a] == ']' && cp) { str[a] = 0; /* if 'cp' is a preprocessor definition, it will evaluate to 0, - * the caller needs to check for this case and throw an error */ + * the caller needs to check for this case and throw an error */ mul *= atoi(cp); } } diff --git a/source/blender/makesrna/intern/rna_armature.c b/source/blender/makesrna/intern/rna_armature.c index 16328c4f864..f3742687fc5 100644 --- a/source/blender/makesrna/intern/rna_armature.c +++ b/source/blender/makesrna/intern/rna_armature.c @@ -130,7 +130,7 @@ static void rna_Armature_update_layers(Main *bmain, Scene *UNUSED(scene), Pointe Object *ob; /* proxy lib exception, store it here so we can restore layers on file - load, since it would otherwise get lost due to being linked data */ + * load, since it would otherwise get lost due to being linked data */ for (ob = bmain->object.first; ob; ob = ob->id.next) if (ob->data == arm && ob->pose) ob->pose->proxy_layer = arm->layer; diff --git a/source/blender/makesrna/intern/rna_userdef.c b/source/blender/makesrna/intern/rna_userdef.c index 637f0bec45b..eaddcc92a92 100644 --- a/source/blender/makesrna/intern/rna_userdef.c +++ b/source/blender/makesrna/intern/rna_userdef.c @@ -376,7 +376,7 @@ static EnumPropertyItem *rna_userdef_compute_device_itemf(bContext *UNUSED(C), P } else { /* get device list from cycles. it would be good to make this generic - once we have more subsystems using opencl, for now this is easiest */ + * once we have more subsystems using opencl, for now this is easiest */ int opencl = (U.compute_device_type == USER_COMPUTE_DEVICE_OPENCL); CCLDeviceInfo *devices = CCL_compute_device_list(opencl); int a; diff --git a/source/blender/nodes/composite/nodes/node_composite_bilateralblur.c b/source/blender/nodes/composite/nodes/node_composite_bilateralblur.c index 5b26927b694..b8aabdae77f 100644 --- a/source/blender/nodes/composite/nodes/node_composite_bilateralblur.c +++ b/source/blender/nodes/composite/nodes/node_composite_bilateralblur.c @@ -92,7 +92,7 @@ static bNodeSocketTemplate cmp_node_bilateralblur_out[]= { /* code of this node was heavily inspired by the smooth function of opencv library. -The main change is an optional image input */ + * The main change is an optional image input */ static void node_composit_exec_bilateralblur(void *UNUSED(data), bNode *node, bNodeStack **in, bNodeStack **out) { NodeBilateralBlurData *nbbd= node->storage; diff --git a/source/blender/nodes/composite/nodes/node_composite_brightness.c b/source/blender/nodes/composite/nodes/node_composite_brightness.c index caae5f313cd..9168a982b5d 100644 --- a/source/blender/nodes/composite/nodes/node_composite_brightness.c +++ b/source/blender/nodes/composite/nodes/node_composite_brightness.c @@ -57,10 +57,10 @@ static void do_brightnesscontrast(bNode *UNUSED(node), float *out, float *in, fl float delta = contrast / 200.0f; a = 1.0f - delta * 2.0f; /* - * The algorithm is by Werner D. Streidt - * (http://visca.com/ffactory/archives/5-99/msg00021.html) - * Extracted of OpenCV demhist.c - */ + * The algorithm is by Werner D. Streidt + * (http://visca.com/ffactory/archives/5-99/msg00021.html) + * Extracted of OpenCV demhist.c + */ if (contrast > 0) { a = 1.0f / a; b = a * (brightness - delta); diff --git a/source/blender/render/intern/raytrace/rayobject_rtbuild.cpp b/source/blender/render/intern/raytrace/rayobject_rtbuild.cpp index 66af64be160..ddc84408e26 100644 --- a/source/blender/render/intern/raytrace/rayobject_rtbuild.cpp +++ b/source/blender/render/intern/raytrace/rayobject_rtbuild.cpp @@ -114,7 +114,7 @@ void rtbuild_add(RTBuilder *b, RayObject *o) if (!finite(bb[3]) || !finite(bb[4]) || !finite(bb[5])) return; /* skip objects with zero bounding box, they are of no use, and - * will give problems in rtbuild_heuristic_object_split later */ + * will give problems in rtbuild_heuristic_object_split later */ if (bb[0] == bb[3] && bb[1] == bb[4] && bb[2] == bb[5]) return; diff --git a/source/gameengine/GameLogic/SCA_PythonController.cpp b/source/gameengine/GameLogic/SCA_PythonController.cpp index 6f1e6e31507..9c8e6fe99b4 100644 --- a/source/gameengine/GameLogic/SCA_PythonController.cpp +++ b/source/gameengine/GameLogic/SCA_PythonController.cpp @@ -507,7 +507,7 @@ int SCA_PythonController::pyattr_set_script(void *self_v, const KX_PYATTRIBUTE_D } /* set scripttext sets m_bModified to true, - so next time the script is needed, a reparse into byte code is done */ + * so next time the script is needed, a reparse into byte code is done */ self->SetScriptText(scriptArg); return PY_SET_ATTR_SUCCESS; |