| Age | Commit message (Collapse) | Author |
|---|
|
Before one could only create a new group input using the link drag search.
With this patch it becomes possible to create a Group Input node for an
existing input.
Differential Revision: https://developer.blender.org/D13674
|
|
This adds `blender::is_same_any_v` which is the almost the same as
`std::is_same_v`. The difference is that it allows for checking multiple
types at the same time.
Differential Revision: https://developer.blender.org/D13673
|
|
The placement-new operator requires `#include <new>`.
It is used in `MEM_new`.
|
|
In case they overflowed the bounding area maximum link count,
Protect the link array so it doesn't crash.
|
|
The edge is linked twice from differen calls during line art calculation
Probably caused by a merge and both calls stayed for some reason.
This would lead to edge link overflowing its limit of 2^16 items.
|
|
Missed this function in rB67525b88d2e
|
|
Own mistake in rB67525b88d2e
|
|
The crash happens when opening a panel (added in rB43f5e761a66e87fed664a199cda867639f8daf3e)
when no CacheFile is set in the modifier.
To fix this, check that the CacheFile pointer is not null before attempting to draw anything.
|
|
Most of the comment block is similar to the text in the source
code documentation wiki. It's helpful to have some text in
a header file too, so it's closer for programmers already looking
at the code.
This also uses more consistent syntax and wording in the comments
about the attribute API in `GeometryComponent`.
Ref T93753
Differential Revision: https://developer.blender.org/D13661
|
|
It's preferred to use `area` as a name for `ScrArea` variables.
|
|
Differential Revision: https://developer.blender.org/D13666
|
|
This patch adds the breakdown (or tween) functionality to the graph editor.
The factor defines the linear interpolation from left key to right key.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9375
Ref: D9375
|
|
This node is a bit special in that it uses two internal sockets
for a hack for Eevee; see rBffd5e1e6acd296a187e7af016f9d7f8a9f209f87
As a result, the `SOCK_UNAVAIL` flag is exposed to socket builder API.
Reviewed By: JacquesLucke, fclem
Differential Revision: https://developer.blender.org/D13496
|
|
Also simplify the allocation name to `__func__`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13665
|
|
This patch adds the blend to neighbor operator to the Graph editor.
The operator acts like the blend to neighbor operator for a pose context, just working on keyframes.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9374
Ref: D9374
|
|
The prop name was wrong.
|
|
The issue was caused by rB7e712b2d6a0d257d272ed35622b41d06274af8df
and the fact that `GPUMaterialTexture` contains an `ImageUser *` which
references the `ImageUser` on e.g. `NodeTexImage`.
Since the node tree update refactor, it is possible that the node tree changes
without changing the actual material. Therefore, either the renderer should
check if the node tree has changed or it should not store pointers to data in
node storage. The latter approach is implemented in this patch.
Differential Revision: https://developer.blender.org/D13663
|
|
|
|
Differential Revision: https://developer.blender.org/D12962
|
|
|
|
I suppose this was done to reduce then dependencies.
However, most nodes already depend on UI code so this isnt too useful.
|
|
API added in rBa3ad5abf2fe85d623f9e78fefc34e27bdc14632e
|
|
Loops come last in the struct's definition, use the same order when
initializing the common masks in customdata.c (they were switched
with the poly masks).
|
|
Needed for D13496
|
|
Most of these custom data layers weren't BMesh only, and the
one that actually looks to be BMesh only has `BM` in its name.
|
|
|
|
This was a regression in rB7e712b2d6a0d257d272ed35622b41d06274af8df.
|
|
Typically a node group should only have a single Group Output node.
However, currently Blender already supports having multiple group outputs,
one of which is active. This wasn't handled correctly by geometry nodes.
Differential Revision: https://developer.blender.org/D13611
|
|
rB05f900e3466b45a19e13bea6dd641e4f7b8b46e9 removed unused button functions,
but since that commit the `uiDefIconTextButBit()` static function sits
unused as well. It's now been removed.
|
|
This was a mistake in rBfdc4a1a590d8befb1ff which copied the parent
node tree into itself rather than accessing the node group's nodes.
|
|
This looks like a copy and paste error from the original commit.
The virtual array output used the number of mesh polygons instead
of the number of edges.
|
|
After rB01df48a983944ab3f8a, this comment no longer applies.
|
|
Differential Revision: https://developer.blender.org/D13657
|
|
These were part of the older buttons API that shouldn't be used in
more places at this point. Most layouts should be built with the regular
layout system API and RNA properties. This sort of button can still be
created though, since these were just shortcuts anyway.
|
|
This adds interface panels to organize the Cache File UI parameters for
modifiers and constraints into related components: velocity, time, and
render procedural.
Properties relating to the three aforementioned components are separated
from `uiTemplateCacheFile` into their own functions (e.g.
`uiTemplateCacheFileVelocity` for the velocity one), which are in turn
called from the specific panel creation routines of the modifiers and
constraints (for constraints, the functions are exposed to the RNA).
`uiTemplateCacheFile` now only shows the properties for the file path,
and in the case of constraints, the scale property.
The properties that are only defined per modifier (like the velocity
scale), are shown in the proper modifier layout panel if applicable.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13652
|
|
When using graph slider operators like D9374
it showed a warning when no keys were selected.
However since that stops the modal operation it should be an Error.
Also the message was misleading
since it could error for different reasons than stated.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13655
Ref: D13655
|
|
Just an extra check for `None` before accessing its properties.
|
|
The `BKE_animdata_driver_path_hack()` function has had almost no effect
since rB51b796ff1528, and basically boils down to:
```
return base_path ? base_path : RNA_path_from_ID_to_property(ptr, prop);
```
Since `base_path` was `NULL` in the majority of cases, it's just been
replaced by a direct call to `RNA_path_from_ID_to_property()`. The
conditional now just appears in one remaining case.
This relates to T91387.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D13646
|
|
Do not allow 3DView operator to run on the liboverride of an
instantiating Empty object. And tweak behavior in the Outliner
operations too.
Related to T94226.
Note that this remains fairly exotic, bad idea not recommended cases,
such complex inter-dependencies between different libraries inside a
same liboverride hierarchy is just not possible to handle properly.
|
|
rBbd3bd776c893 broke compilation here due to missing type declaration
for basic types as the source file is not including this header. In any
case, it is the responsibility of header files to include headers for
types used by value in function parameters or struct definitions.
|
|
|
|
Caused by 60c59d7d611dfd726. The position wasn't copied into the correct
place on each spline. Somehow I didn't catch that in the tests I ran.
|
|
If the input mesh had no materials already, the new material would
become the only material on the mesh, meaning the material was
added to all of the faces, instead of just the selected faces.
The mesh primitive nodes in geometry nodes already add an empty
slot by default, so this only affects outside geometry.
The fix is just adding an empty slot before the new slot, so the
non-selected material indices can still point to an empty slot.
Differential Revision: https://developer.blender.org/D13654
|
|
It's better to calculate the size of a spline before creating it, and this
should simplify refactoring to a data structure that stores all point
attribute contiguously (see T94193). The mesh to curve conversion is
simplified slightly now, it creates the curve output after gathering all
of the result vertex indices. This should be more efficient too, since
it only grows an index vector for each spline, not a whole spline.
|
|
Previously only the float version of the node was connected to.
This adds connection operations for vector sockets, and exposes
the "Steps" socket properly when it's selected.
|
|
|
|
|
|
Caused by capturing local variables by reference in a function that
outlives the scope it was created in. Also use a more generic function
for the first two inputs.
|
|
I don't think this has been visible, since I only ran into it after
changing other code that affected this. However, some attributes
can keep a reference to the source component to use when tagging
caches dirty (like the position attribute tagging the normals dirty).
Here, the component was created inside a function, then the attributes
were used afterwards.
Also add some comments warning about this in the header file.
|
|
When COM_EXPORT_GRAPHVIZ is enabled, DebugInfo::graphviz
uses a char[1000000] as local variable. When this function
is called this is allocated on the stack, which has a size
of just 1MB on mac and may cause a stack overflow.
This patch allocates the memory on the heap and frees
the memory at the end of the function.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D13628
|
