Age | Commit message (Collapse) | Author |
|
|
|
Replace 5 arguments with a single struct as the same arguments
are used in many places.
This didn't read well and was confusing with both arguments named
`val` & `value` in the case of WM_modalkeymap_add_item.
|
|
Add blank lines after file references to avoid them being interpreted as
doc-strings the following declarations.
|
|
Remove the extended version of ED_curve_editnurb_select_pick,
pass the size threshold directly to this function but as the distance in
pixels instead of a multiplier for ED_view3d_select_dist_px.
Using a multiplier is a less direct way to reference the threshold.
|
|
Other newly created points were already active, just not for newly
created curves.
|
|
|
|
|
|
|
|
Add ccl_gpu_kernel_postfix as a statement macro to prevent the following
declarations from being indented.
|
|
|
|
This has been broken for two years, since rB29f3af952725,
which retrieved the bounding box from an object and immediately
overwrote it with -1, 1. That commit had another problem though--
the modifier stack shouldn't use object level data, it should use
data from the previous modifier.
Differential Revision: https://developer.blender.org/D14524
|
|
Add support for the Curves object to the "Set Origin" and "Apply Object
Tansform" operators. Also change the automatic handle calculation to
avoid adding Bezier attributes if they don't need to be added.
Differential Revision: https://developer.blender.org/D14526
|
|
These functions are very simple, but some of them were showing up in
in profiles for curves sculpt mode and various curve nodes. Making sure
they are inlined will allow avoiding the compiler to optimize this logic
much better.
Differential Revision: https://developer.blender.org/D14529
|
|
This tool can be used to rapidly edit curves. The current set of
functionalities for Bezier splines are as follows:
The functionalities are divided into three versions of the operator:
* Left-Click
* Ctrl + Left-Click
* Double Click
All current functionalities and their defaults are as follows:
* Extrude Point: Add a point connected to an existing point.
Enabled for Left-Click.
* Extrude Handle Type: Type of the handles of the extruded points.
Can be either Vector or Auto. Defaults to Vector.
* Delete Point: Delete existing point.
Enabled for Ctrl + Left-Click.
* Insert Point: Insert a point into a curve segment.
Enabled for Ctrl + Left-Click.
* Move Segment: Move curve segment.
Enabled for Left-Click.
* Select Point: Select a single point or handle at a time.
Enabled for Left-Click.
* Move point: Move existing points or handles.
Enabled for Left-Click.
* Close Spline: Close spline by clicking the endpoints consecutively.
Defaults to True.
* Close Spline Method: The condition for Close Spline to activate.
Can be one of None, On Press or On Click.
Defaults to On Click for Left-Click and None for the others.
* None: Functionality is turned off.
* On Press: Activate on mouse down.
This makes it possible to move the handles by dragging immediately
after closing the spline.
* On Click: Activate on mouse release.
This makes it possible to avoid triggering the Close Spline
functionality by dragging afterward.
* Toggle Vector: Toggle handle between Vector and Auto handle types.
Enabled for Double Click on a handle.
* Cycle Handle Type: Cycle between all four handle types.
Enabled for Double Click on the middle point of a Bezier point.
The keybindings for the following functionalities can be adjusted from
the modal keymap
* Free-Align Toggle: Toggle between Free and Align handle types.
Defaults to Left Shift. Activated on hold.
* Move Adjacent Handle: Move the closer handle of the adjacent vertex.
Defaults to Left Ctrl. Activated on hold.
* Move Entire: Move the entire point by moving by grabbing on the handle
Defaults to Spacebar. Activated on hold.
* Link Handles: Mirror the movement of one handle onto the other.
Defaults to Right Ctrl. Activated on press.
* Lock Handle Angle: Move the handle along its current angle.
Defaults to Left Alt. Activated on hold.
All the above functionalities, except for Move Segment and
those that work with handles, work similarly in the case of Poly
and NURBS splines.
Reviewed By: HooglyBoogly, weasel, campbellbarton
Differential Revision: http://developer.blender.org/D12155
|
|
This was essentially double free due to a dangling pointer,
because `op->customdata` was not properly set to null after
the paint stroke was freed.
|
|
Similar to 4537eb0c3b1678a6235
|
|
The initial commit only wrote direct and indirect lighting into the lightgroup passes,
but not rays that directly hit the light source itself.
|
|
Moves all `interface_region*` files to C++ except for the tooptip region
which is slightly more complicated. Also move a few other files as well.
This helps to simplify and speed up code, especially through the use
of better C++ data structures. This change builds on all platforms on
the buildbot.
|
|
This patch re-adds the shading menu to lights to allow people to use lights in light groups.
This patch also hides all settings in the shading menu that are not useful for the light object.
Reviewed By: lukasstockner97
Maniphest Tasks: T96973
Differential Revision: https://developer.blender.org/D14527
|
|
Array has bounds checking that a raw pointer didn't have before.
|
|
Light groups are a type of pass that only contains lighting from a subset of light sources.
They are created in the View layer, and light sources (lamps, objects with emissive materials
and/or the environment) can be assigned to a group.
Currently, each light group ends up generating its own version of the Combined pass.
In the future, additional types of passes (e.g. shadowcatcher) might be getting their own
per-lightgroup versions.
The lightgroup creation and assignment is not Cycles-specific, so Eevee or external render
engines could make use of it in the future.
Note that Lightgroups are identified by their name - therefore, the name of the Lightgroup
in the View Layer and the name that's set in an object's settings must match for it to be
included.
Currently, changing a Lightgroup's name does not update objects - this is planned for the
future, along with other features such as denoising for light groups and viewing them in
preview renders.
Original patch by Alex Fuller (@mistaed), with some polishing by Lukas Stockner (@lukasstockner97).
Differential Revision: https://developer.blender.org/D12871
|
|
Also solves two warnings from the previous similar commit,
f688e3cc3130e70e77f0bb0. The change to the grease pencil
modifier is quite suspicious, but doesn't change the behavior,
which was already broken.
|
|
This abstraction doesn't serve any purpose after 11c6d4e88eb919.
The flag on bounding boxes isn't used, except for the dirty tag.
|
|
This can help make some refactoring to bounding boxes slightly easier.
|
|
This flag hasn't been used for around four years. The convention in this
header seems to be commenting out the flag and adding "UNUSED" after it.
|
|
|
|
|
|
Currently there are no functional changes.
Preparing for an upcoming oneAPI integration where such separation
in types is needed.
|
|
Increases flexibility of code-generation for kernel entry points.
Currently no functional changes, preparing for integration with oneAPI.
|
|
Should be no functional changes.
|
|
Reduce register pressure.
Helps with kernel compile time and render time.
Should be no functional changes.
|
|
Re {T95206}.
|
|
This adds support for selective rendering of caustics in shadows of refractive
objects. Example uses are rendering of underwater caustics and eye caustics.
This is based on "Manifold Next Event Estimation", a method developed for
production rendering. The idea is to selectively enable shadow caustics on a
few objects in the scene where they have a big visual impact, without impacting
render performance for the rest of the scene.
The Shadow Caustic option must be manually enabled on light, caustic receiver
and caster objects. For such light paths, the Filter Glossy option will be
ignored and replaced by sharp caustics.
Currently this method has a various limitations:
* Only caustics in shadows of refractive objects work, which means no caustics
from reflection or caustics that outside shadows. Only up to 4 refractive
caustic bounces are supported.
* Caustic caster objects should have smooth normals.
* Not currently support for Metal GPU rendering.
In the future this method may be extended for more general caustics.
TECHNICAL DETAILS
This code adds manifold next event estimation through refractive surface(s) as a
new sampling technique for direct lighting, i.e. finding the point on the
refractive surface(s) along the path to a light sample, which satisfies Fermat's
principle for a given microfacet normal and the path's end points. This
technique involves walking on the "specular manifold" using a pseudo newton
solver. Such a manifold is defined by the specular constraint matrix from the
manifold exploration framework [2]. For each refractive interface, this
constraint is defined by enforcing that the generalized half-vector projection
onto the interface local tangent plane is null. The newton solver guides the
walk by linearizing the manifold locally before reprojecting the linear solution
onto the refractive surface. See paper [1] for more details about the technique
itself and [3] for the half-vector light transport formulation, from which it is
derived.
[1] Manifold Next Event Estimation
Johannes Hanika, Marc Droske, and Luca Fascione. 2015.
Comput. Graph. Forum 34, 4 (July 2015), 87–97.
https://jo.dreggn.org/home/2015_mnee.pdf
[2] Manifold exploration: a Markov Chain Monte Carlo technique for rendering
scenes with difficult specular transport Wenzel Jakob and Steve Marschner.
2012. ACM Trans. Graph. 31, 4, Article 58 (July 2012), 13 pages.
https://www.cs.cornell.edu/projects/manifolds-sg12/
[3] The Natural-Constraint Representation of the Path Space for Efficient
Light Transport Simulation. Anton S. Kaplanyan, Johannes Hanika, and Carsten
Dachsbacher. 2014. ACM Trans. Graph. 33, 4, Article 102 (July 2014), 13 pages.
https://cg.ivd.kit.edu/english/HSLT.php
The code for this samping technique was inserted at the light sampling stage
(direct lighting). If the walk is successful, it turns off path regularization
using a specialized flag in the path state (PATH_MNEE_SUCCESS). This flag tells
the integrator not to blur the brdf roughness further down the path (in a child
ray created from BSDF sampling). In addition, using a cascading mechanism of
flag values, we cull connections to caustic lights for this and children rays,
which should be resolved through MNEE.
This mechanism also cancels the MIS bsdf counter part at the casutic receiver
depth, in essence leaving MNEE as the only sampling technique from receivers
through refractive casters to caustic lights. This choice might not be optimal
when the light gets large wrt to the receiver, though this is usually not when
you want to use MNEE.
This connection culling strategy removes a fair amount of fireflies, at the cost
of introducing a slight bias. Because of the selective nature of the culling
mechanism, reflective caustics still benefit from the native path
regularization, which further removes fireflies on other surfaces (bouncing
light off casters).
Differential Revision: https://developer.blender.org/D13533
|
|
With automatic collection previews (810e225c260d) and a toggle for
collection instancing (previous commit) supported, there are no known
blocking issues for collection assets. There are still further
improvements to come as part of regular developemt (e.g. bounding box
based snapping).
|
|
Makes it possible to toggle instancing via the "Adjust Last Operation"
panel after dropping a collection asset into the viewport.
A design task that puts this into more context is pending still, but
this is a useful option to have either way.
Differential Revision: https://developer.blender.org/D14507
Reviewed by: Bastien Montagne
|
|
Re {T95206}.
|
|
The Alembic procedural was only enabled during viewport renders
originally because it did not have any caching strategy. Now that
is does, we can allow its usage in final renders.
This also removes the `dag_eval_mode` argument passing to
`ModifierTypeInfo.dependsOnTime` which was originally added to detect if
we are doing a viewport render for enabling the procedural.
Differential Revision: https://developer.blender.org/D14520
|
|
This commit moves declarations that depend on `FN_field.hh` out of
`BKE_geometry_set.hh` into `BKE_geometry_fields.hh`. This helps to
reduce the number of areas that need to depend on the functions module,
which recently came in in review of D11591.
In the future we may have a library of standard field inputs in order to
make composing algorithms easier, so it makes sense to have a header
that could contain them and some basic related utilities relating the
concepts of geometry and fields.
Reducing use of unnecessary headers may also reduce compilation time.
Differential Revision: https://developer.blender.org/D14517
|
|
This commit adds attribute search the the attribute input field node.
Because it's a field node, finding which attribute to display without
increasing the complexity a lot isn't obvious. In this commit, all
attributes used by nodes in the current group are included.
When an attribute is chosen from the list, the node's data type is
updated, and links connected to the output socket are reconnected.
Ref T96271
Differential Revision: https://developer.blender.org/D14516
|
|
This commit ports the "Set Handle Positions" and "Set Hanle Type"
nodes to use the new curves data-block. The nodes become simpler
and likely much faster too, though they're usually not the bottleneck
anyway.
Most of the code is ported from `BezierSpline` directly. The majority
of the complexity comes from the interaction between different
automatically calculated handle types. In comparison `BezierSpline`,
the calculation of auto handles is done eagerly-- mostly because it's
simpler. Eventually lazy calculation might be good to add.
Differential Revision: https://developer.blender.org/D14464
|
|
|
|
Original report (T96763) only reported the issue of double-space before the texture path, but while adding test coverage I found some other issues that I fixed while at it:
- Incorrectly emits two spaces between `map_Xx` keyword and the texture path, leading to some 3rd party software not finding the textures,
- Emissive texture map (`map_Ke`) was not exported,
- When Mapping node is used on the texture UVs, the "Location" and "Scale" values were mixed up (location written as "scale", scale written as "location).
Added gtest coverage.
Reviewed By: Howard Trickey
Differential Revision: https://developer.blender.org/D14519
|
|
have been linked and library override enabled.
PointCache handing is just horrible from RNA, makes dealing with
overrides a nightmare...
Ended up having to add a specific 'apply' callback for the `use_disk_cache`
property, that would explicitely NOT call the the `update` callback of
this property, to avoid having the whole disk cache nuked away...
But the whole thing remains fairly britle, to say the least.
|
|
not on overridden properties.
While this is the desired behavior in almost cases, there are a few
hairy nightmares that may require not to do so.
NOTE: this change should should not modify any current behavior at all.
|
|
Not really clear why that would only show with multiple caches... But
point cache system is beyond brittle anyway.
This fix solves the issue at two different levels:
* General safety check in `rna_Cache_info_length` that we do get a valid
`pid`.
* Forbid usage of this `PointCache.info` RNA property in any
diffing/LibOverride processing (since it's by definition runtime, volatile
data).
|
|
The variable `ofs` in `widget_numslider` was referring to the radius.
`rad` is more clear and consistent with the other widget functions.
|
|
Keep the value slider from clipping through rounded corners for
low values by ensuring the width of the slider rectangle is at least
twice the corner radius.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D11474
|
|
This was introduced by rBeccb0b222e3465baa71430223c5ee2f0206a7b02.
|
|
Re {T95206}.
|
|
Re {T95206}.
|