| Age | Commit message (Collapse) | Author |
|---|
|
Particle copying code was already properly sharing pointcache between
orig data and its copy only when `LIB_ID_COPY_SET_COPIED_ON_WRITE` is
set, do the same for the other point cache users.
Using `LIB_ID_CREATE_NO_MAIN` here is waaaaaaay to much wide scope for
such a dangerous/advanced behavior, that kind of things has to be
strictly restricted in scope.
|
|
Remove `AssetCatalogService::write_to_disk()` function. It has been
superseded by `write_to_disk_on_blendfile_save()`; the handful of test
functions that called the old function have been adjusted to use the
new one.
No functional changes to Blender itself.
|
|
This change fixes an issue when scene has a shadow catcher and film is
configured to be transparent. Starting viewport render and making the
background non-transparent will cause bad memory access (wrong render
and possibly crash).
Film passes depends on transparency of background, so check for this.
Demo file: F10650585
Differential Revision: https://developer.blender.org/D12666
|
|
Only do denoising on the full-frame result. Saves render time.
Can re-consider in the future when/if we'll want to support
denoising during rendering (similar to viewport) to allow artists
to stop rendering when they see image to be good enough. Until
there is a design for that workflow stick to a more time efficient
rendering.
Differential Revision: https://developer.blender.org/D12662
|
|
Use dashes to represent the function flow (while keeping continuous
lines for the data-flow).
It is important to tell both flows apart (the data and the function
flow). The sockets help with that, the noodles help this further.
The "data flow" is evaluated at every single node. A user can inspect
the output sockets of those nodes and have a glimpse at their values.
The "function flow" (nodes) however is only evaluated in the geometry
nodes. The noodles are not transporting data in the same sense of the
"data flow". All that can be inspected are the attributes the functions
depend on.
Having this clearly communicated should help users to inspect the
nodetrees, read and understand the different flows in the same tree.
---
Known limitations:
At the moment the dash lines are not equidistant:
* It would be nice to get the "uv.x" to be resampled for the bezier curve
so the dashes are equally distributed in the curve.
* Using distance between the P3 and P0 instead of the real bezier curve
length seems to be fine.
---
Full disclaimer:
Changes with that much of a visual impact tend to be controversial. So
far the main feedback is that dashed lines can be associated to broken
link, and that there are better ways to represent the flows (or
different information that should be visually represented).
I'm fully aware of that. However dashed lines are already used in the
viewport and outliner to indicate (hierarchical) relation. Besides,
other approaches (double-lines, having the data flow to be more
distinct, ...) didn't pan out in the end (or didn't look as good as
this).
---
Impact in other editors:
The compositor uses mostly a "data flow" nodetree, so no change is
expected there.
The shader nodetree is one that could but doesn't have to change its
visual language.
The shader nodetree uses mostly "function flow" with some "data flow" nodes.
One can argue that it should be adapted to follow the
same pattern as geometry nodes (with the new noodles and the diamond
sockets). Oh the other hand, a shader nodetree has a single context.
When a node depends on the "UV", there is only one UV at a time for the
entire nodetree. So it can also be treated as a psedo "data flow"
nodetree if we want to avoid too many changes in other parts of Blender.
Differential Revision: https://developer.blender.org/D12602
|
|
Expose them to the interface, and stop rendering as soon as possible.
Differential Revision: https://developer.blender.org/D12617
|
|
Add `AssetCatalogService::update_catalog_path()` to change the catalog
path of the given catalog, and also change the path of all the catalogs
contained within the given catalog.
Rebuilds the tree structure for the UI, but does not save the new catalog
definitions to disk.
No user-facing changes, just backend preparation for UI work.
|
|
|
|
NLA and Dope Sheet use a specific transform operation to scale.
Unlike the conventional resize operation, `TIME_SCALE` operates on `td->val`.
This is a bit outside the convention of transform operators.
The expected thing in this case would be to work in `td->loc` and use the conventional resize operator.
But for now, to fix the problem, use `td->loc` in the `TIME_SCALE` operation.
This commit also brings a cleanup in the style of some comments and removing unnecessary `memset`.
|
|
The Clear Asset operator (`ASSET_OT_clear`) now clears the Fake User.
This makes it symmetrical with the Mark Asset (`ASSET_OT_mark`)
operator, which sets Fake User to ensure assets are always saved to
disk.
Clear Asset now also has a `set_fake_user` boolean option, which allows
users to Clear Asset and set Fake User in one go.
The asset browser now shows these options in the context menu:
- Clear Asset: also clears Fake User. This makes it possible to actually
remove assets from the blend file without leaving the Asset Browser.
- Clear Asset (Set Fake User): keeps the Fake User bit set. This makes
it possible to "hide" the asset from the asset browser, without
loosing the actual data.
Internally, the `ED_asset_clear_id(id)` function now always clears the
Fake User bit. If it was intended that this bit was kept set, it's up to
the caller to explicitly call `id_fake_user_set(id)` afterwards.
Manifest Task: T90844
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12663
|
|
Noticed by @david_black in D12392, thx!
|
|
As the title says
Reviewed By: lichtwerk, campbellbarton
Differential Revision: https://developer.blender.org/D12665
|
|
The method works perfectly fine when `resource` is empty.
|
|
Previously, we were moving them one by one. It's a lot easier
to just move all files at the same time.
|
|
Currently the Drivers Editor shows this (the blue thing can be dragged
to change frame):
{F10647661}
But the Drivers Editors X axis is the output of the driver [which can be
further tweaked by the curve] not time(frame).
So it seems better to not mix them here, it is just confusing to have
two different units on one axis.
Especially since what we really want to look at in X (the drivers output
value) can be in a totally unrelated range compared to frames, so e.g.
we might be interested in a drivers range from 0.0 to 1.0 and a
framerange of 100 to 200, so putting this on one axis just does not make
sense. Better to use a separate timeline for this.
Note 2.79 also did not do this.
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12392
|
|
When "Show Cursor" is unchecked, the Drivers Editor would still display
the vertical line representing the cursor x.
Probably overseen in {rB65072499c65a} (historically the vertical line
could represent either the current frame of the cursor X in drawing, but
this is now much more separate).
There is no point in seeing part of the cursor in the Drivers Editor if
this is disabled.
Also correct outdated comments.
ref. T91157
Maniphest Tasks: T91157
Differential Revision: https://developer.blender.org/D12391
|
|
Make `BLI_path_contains()` case-insensitive on Windows. This behaviour
is dependent on the platform Blender is running on, like the rest of
BLI_path, and not on the style of paths (Windows-style paths will be
treated case-sensitively when Blender is running on Linux/macOS).
|
|
The related issue which is fixed by this change is the missing noisy
image pass when denoising and border render is used,
Need to allocate passes after the passes has been copied from the
original render result.
|
|
Differential Revision: https://developer.blender.org/D12661
|
|
This is a follow up to 8fecc2a8525467ee2fbbaae16ddbbc10b3050d46.
This makes sure future .blend files that have more channels than the
limit won't break Blender.
It can be backported to LTS.
This is part of https://developer.blender.org/D12645
Differential Revision: https://developer.blender.org/D12648
|
|
|
|
|
|
Differential Revision: https://developer.blender.org/D12652
|
|
Labels in headers reserved space for an icon even when no icon was used.
This is caused by the shared function ui_text_icon_width adding 1.5x
a buttons X-units width the the width of the string.
Menu buttons detected this and subtracted the extra padding.
Instead of adding the same workaround for labels,
add ui_text_icon_width_ex that takes a padding argument.
Add presets for 'default', 'compact' and 'none' to avoid duplicating
padding values.
This allows removal of hard-coded label scaling for the add-object tool.
|
|
While World data has always been able to be marked as an asset, there
was no way to actually use them from the asset browser. This change
allows users to drag-drop world assets onto the Viewport and have them
appended/linked to their scene.
Differential Revision: https://developer.blender.org/D12566
|
|
|
|
Only run the node once for every unique geometry set in the input's
instance heirarchy. This can massively improve performance when
there are many instances, but it will mean that the result is the same
for every instance. For the previous behavior, a "Realize Instances"
node can be used before this one.
This node can be changed without versioning since the old material
assign node was already deprecated and replaced.
|
|
In a sub-panel it will be clearer that they are outputs, since they
just look like more inputs now. Unfortunately it is not possible to
make sub-panels display conditionally currently, so the output
sub-panel will always be visible whether or not it is empty.
Differential Revision: https://developer.blender.org/D12653
|
|
Part of the fix is by Jacques. This fixes the most obvious case, but it's
still not clear how to deal with non-mesh geometry instances or how to handle
motion blur for such instances.
|
|
|
|
As also explained in D6134, in most case of Stretch To usage in
rigs, it is desirable to use swing rotation, either via the old
method of pairing the constraint with Damped Track, or via the
Swing rotation type introduced in 2.82. This is for instance true
for all usages of the constraint in Rigify.
The reason can be understood by realizing that unlike order-
dependent euler rotations, swing is not biased to an axis, and
isn't affected by gimbal lock effects at merely 90 degrees
of rotation (it has only one singularity at 180 degrees).
Thus it makes sense to change the default for newly created
constraints to the Swing mode. This has no backward compatibility
concerns except for old tutorials and rig generation scripts.
Differential Revision: https://developer.blender.org/D12643
|
|
|
|
Basically this enables the select-tweaking behavior as per the
guidelines:
https://wiki.blender.org/wiki/Human_Interface_Guidelines/Selection#Select-tweaking.
We use this in most other other editors that allow selecting and
dragging multiple items. But besides the consistency improvement, this
is important if we want to support dragging multiple assets (or files)
in future. We want to support this at least for dragging multiple assets
into an asset catalog for the upcoming asset catalog UI.
|
|
Found by clang tidy (P2439).
|
|
Caused by rBc99cb814520480379
|
|
With this commit, the distribute points on faces node runs only
once for every unique mesh in its input. That means if there are
100 instances of the same mesh, it will only run once.
This basically reverts rB84a4f2ae68d408301. The optimization there
didn't end up being worth it in the end, since it complicates code
quite a lot. It's also incompatible with this method of dealing with
instances, and it breaks field evaluation for instances, where we would
have to make sure to handle each instance transform properly otherwise,
evaluating the field separately for every instance.
Differential Revision: https://developer.blender.org/D12630
|
|
Change `auto &catalog` to `const auto &catalog`.
No functional changes.
|
|
The Asset Catalog Definition File is now saved whenever the blend file
is saved. The location of the CDF depends on where the blend file is
saved, and whether previously a CDF was already loaded, according to the
following rules. The first matching rule wins:
1. Already loaded a CDF from disk? -> Always write to that file.
2. The directory containing the blend file has a
`blender_assets.cats.txt` file? -> Merge with & write to that file.
3. The directory containing the blend file is part of an asset library,
as per the user's preferences? -> Merge with & write to
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`
4. Create a new file `blender_assets.cats.txt` next to the blend file.
|
|
Add `BKE_preferences_asset_library_containing_path(&U, some_path)` that
finds the asset library that contains the given path.
This is a simple linear search, returning the first asset library that
matches. There is no smartness when it comes to nested asset libraries
(like returning the library with the best-matching path), although this
could be a useful feature to add later.
|
|
Add function `BLI_path_contains(container, containee)` that returns true
if and only `container` contains `containee`.
Paths are normalised and converted to native path separators before
comparing. Relative paths are *not* made absolute, to simplify the
function call; if this is necessary the caller has to do this conversion
first.
|
|
that are assigned to particle systems/hair.
`BKE_object_material_slot_used` would only check obdata usages, but
particle settings can also (weirdly enough) use objects' material slots.
So now, as its name suggests, `BKE_object_material_slot_used` does take
an object as parameter, and also checks for potential slot usage from
psys in the object.
|
|
* Fixes missing update of the catalog tree when adding catalogs.
* Adds iterators for the catalogs, needed for UI code.
* Store catalog ID in the catalog tree items, needed for UI code.
* Other smaller API additions for the UI.
* Improve comments and smaller cleanups.
New functions are covered with unit tests.
Differential Revision: https://developer.blender.org/D12618
Reviewed by: Sybren Stüvel
|
|
|
|
This adds a new `GeometrySet::modify_geometry_sets` method that can be
used to update each sub-geometry-set separately without making any
instances real.
Differential Revision: https://developer.blender.org/D12650
|
|
Before the visibility test against the visibility flags was performed in an any-hit program in OptiX
(called `__anyhit__kernel_optix_visibility_test`), which was using the `__prim_visibility` array.
This is not entirely correct however, since `__prim_visibility` is filled with the merged visibility
flags of all objects that reference that primitive, so if one object uses different visibility flags
than another object, but they both are instances of the same geometry, they would appear the same
way. The reason that the any-hit program was used rather than the OptiX instance visibility mask is
that the latter is currently limited to 8 bits only, which is not sufficient to contain all Cycles
visibility flags (12 bits).
To mostly fix the problem with multiple instances and different visibility flags, I changed things to
use the OptiX instance visibility mask for a subset of the Cycles visibility flags (`PATH_RAY_CAMERA`
to `PATH_RAY_VOLUME_SCATTER`, which fit into 8 bits) and only fall back to the visibility test any-hit
program if that isn't enough (e.g. the ray visibility mask exceeds 8 bits or when using the built-in
curves from OptiX, since the any-hit program is then also used to skip the curve endcaps).
This may also improve performance in some cases, since by default OptiX can now perform the normal
scene intersection trace calls entirely on RT cores without having to jump back to the SM on every
hit to execute the any-hit program.
Fixes T89801
Differential Revision: https://developer.blender.org/D12604
|
|
* ID pointer returned by `wm_file_link_append_datablock_ex` was
improperly extracted from `WMLinkAppendDataItem` before append step.
* Code deleting linked IDs when their local matching version was re-used
did not properly clear `LIB_TAG_DOIT` beforehand.
|
|
If the theme used by the user did not touch the wire or the wire outline
colors this will update them as well.
This was supposed to be a part of a bigger UI theme change for 3.0. But
it was expedited because of the recent change in line thickness for the
noodles (2bd02052157).
Theme change by Pablo Vazquez.
Differential Revision: https://developer.blender.org/D12649
|
|
This patch allows passing a field to the modifier as output. In the
modifier, the user can choose an attribute name. The attribute
will be filled with values computed by the field. This only works
for realized mesh/curve/point data. As mentioned in T91376, the
output domain is selected in the node group itself. We might want
to add this functionality to the modifier later as well, but not now.
Differential Revision: https://developer.blender.org/D12644
|
|
For some reason was assuming setting a property in RNA would call its
update callback if any, but this actually needs to be done separately.
So add this call to `rna_property_override_operation_apply`.
|
|
There are cases where there is no way to ensure we do have/know about an
active scene. Further more, this should not be required to perform
'real' updates on data, only to perform additional special handling in
current scene (mostly related to editing tools, UI, etc.).
This pointer is actually almost never used in practice, and half of its current
usages are fairly close to abuse of the system (like calls to
`ED_gpencil_tag_scene_gpencil` or `BKE_rigidbody_cache_reset`).
This commit ensures that the few places using this 'active scene' pointer are
safely handling the `NULL` case, and clearly document the fact that a
NULL scene pointer is valid.
|
