| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This node updates the "rotation" attribute on points.
Multiple ways to specify the rotation are supported.
Differential Revision: https://developer.blender.org/D9883
Ref T83668.
|
|
Disclaimer: This workaround avoids crashing with current state of the
code and is only committed as temporary band-aid until we can assess the
full issue and decide if/how it needs to be adressed.
|
|
This fixes the main issue there (essentially a followup to
rB90e12e823ff0: Fix T81854: crash when undoing switch between sculpt and
edit mode).
We basically remove more (hopefully all the remaining!) modifications of
orig mesh from `sculpt_update_object`, as those done here will not be
immediately available in the evaluated data (that specific bug happened
because masking data was added to orig mesh there, but not flushed to
depsgraph evaluated one).
This also goes towards a better separation between handling of evaluated
data and orig one.
Note that modification of orig mesh data can still happen, e.g. values
in some cdlayers, but at least all pointers should now be valid in the
evaluated mesh.
There are still some issues, e.g. we now get an assert/crash in
`multires_reshape_assign_final_coords_from_ccg` when undoing out of the
Sculpt mode, presumably because subdiv_ccg data remains unchanged then
(and hence still has the `has_mask` flag set), while actual mesh data do
not have that cdlayer anymore...
This commit also cleans up/simplifies some code,
`ED_object_sculptmode_enter_ex` was (indirectly) calling
`BKE_sculpt_face_sets_ensure_from_base_mesh_visibility` twice e.g.
|
|
Path resolving can find e.g. a datablock rather than a float or integer,
treat that as a failure to find a valid property.
|
|
Mainly updated the Mantaflow version. It includes the new viscosity solver plugin based on the method from 'Accurate Viscous Free Surfaces for Buckling, Coiling, and Rotating Liquids' (Batty & Bridson).
In the UI, this update adds a new 'Viscosity' section to the fluid modifier UI (liquid domains only). For now, there is a single 'strength' value to control the viscosity of liquids.
|
|
This seems to be a longer standing issue. Steps to reproduce were:
* With factory settings, Ctrl+O then F12
* Close the render window using the window close button
* Close the File Browser window using the window close button
This could be OS specific though, at least on macOS this caused a crash.
|
|
|
|
With the new `ed_util_ops.c` introduced in 2250b5cefee7, existing code can be
cleaned up to use it.
* Move new ID preview operators to `ed_util_ops.c`
* Move ED operator registration to `ed_util_ops.c`
* Use doxygen sections in `ed_util_ops.c`
* Rename ID related ED operators to use `ED_OT_lib_id_` prefix.
* Remove unused `#include`s
|
|
After 1e799dd26ec1, the logic to recognize a temporary File Browser window
didn't work correctly anymore. It would recognize a maximized File Browser
inside a temporary window as a temporary File Browser window, and attempt to
close this (rather than returning to the previous layout).
The logic there was pretty weak, and still is I think. A more stable solution
would need bigger refactoring.
With this, it's also not possible to maximize or fullscreen an area within a
temporary window (Preferences, File Browser, render window) anymore. Think that
won't make a noticable difference, since you couldn't open multiple areas there
anyway, and the area seems to be maximized already.
Cleaned up the code a bit to not become more confusing with the changes.
|
|
variables.
That code looked really like a joke tbh... Random reported memory usage
is not really that important, but the uninitialized items counts was
potentially fairly severe.
|
|
|
|
|
|
Don't add the same stats refresh notifiers multiple times, it can be slow to
search the full list of notifiers for duplicates when there are many.
Fundamentally the time complexity in searching for duplicates is still bad.
Inspired by D9901 from Erik Abrahamsson
|
|
Does not need to be hidden in the menu.
|
|
|
|
Need to pass the appropriate flags as we do for compilation as part of the
CMake build.
|
|
|
|
Sometimes multiple calls to `bpy.data.orphans_purge()` are needed to
delete all orphans, because a call can turn previously-used datablocks
into orphans. Returning the number of deleted datablocks makes it
possible to keep looping until nothing can be deleted any more.
This patch keeps track of deletions in `id_delete()` so that it can be
returned up the call stack.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9918
|
|
Respond to return values of `fscanf()` and `fread()` to detect and
handle I/O errors. Not only is error handling a good idea, this also
prevents warnings from GCC that `fread()` and `fscanf()` return values
are ignored.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9915
|
|
Perform the same filtering as e5528904f12104ee31e7b67b54f2a4b3f14cec1e
introduced for object rotations, for bone rotations.
|
|
`seq_convert_transform_animation()` converted only keyframed value, but
when bezier interpolation is used, posotion of handles was unchanged.
This caused significant difference in animation.
I have checked only linear interpolation when testing versioning originally.
|
|
This adds a popover to the properties editor. Currently the only setting
is for controlling outliner to properties syncing.
Because we cannot define a perfect heuristic to determine when
properties editors should change tabs based on outliner icon selection,
we need an option to enable or disable this behavior per properties
editor.
There are 3 options for controlling the syncing. Auto uses the heuristic
to only allow tab switching when a properties editor and outliner share
a border. On and off enable and disable syncing respectively.
Differential Revision: https://developer.blender.org/D9758
|
|
**Renames parms**:
| **old name** | **new name**
| old_value | lower_value
| target_value | blended_value
| value | strip_value
| inf | influence
**Reason**: {D8296} allows full nla stack evaluation with proper
keyframing support. These names should make it more intuitive how all
the data gets processed and inverted. Note, that I do use the term
"strip_value" instead of something like "fcurve_value" of the tweak
strip. Technically, "strip_value" is closer to what is solved for.
For example, if a noise fmodifier was active for the fcurve, then the
remapping would appear to be wrong. In the future, further solving can
be done afterward, outside of the nla system, to remove the effects of
fmodifiers.
**Renames functions**:
| nla_invert_blend_value | nla_blend_get_inverted_strip_value
| nla_invert_combine_value | nla_combine_get_inverted_strip_value
**Reason**: D8296 adds get_inverted_lower_value() variants,
so "invert" alone is too vague.
**Renames NlaKeyframingContext member**:
| nla_channels | lower_eval_data
**Reason**: D8296 evaluates the upper stack. This name makes it more
obvious what data is stored there.
No functional changes (relative to the dependency below)
Split from {D9247}
Depends on {D9694} since the code was so close to eachother.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D9695
|
|
Always assume geometry nodes produce potentially animated meshes or point
clouds. In general it is hard to check if geometry nodes are animated, and
for modifiers this was already weak.
The better solution will likely involving checking which geometry was
modified by the depsgraph on frame change, to replace the current mechanism
of manually checking for certain types of modifiers and animation.
|
|
Weight Paint Multi-Paint definitely depends on the weight specific
flag, and vertex group locking also involves group name symmetry
via BKE_object_defgroup_mirror_selection. These two are also
features implemented by me so I feel confident.
The rest of object_vgroup.c possibly should be changed too, but
that requires more consideration than these obvious cases.
|
|
|
|
Differential Revision: https://developer.blender.org/D9906
|
|
Use the `ASSET_MANAGER` icon which is more appropriate than the current one
which was just an unused icon that seemed sorta fitting, but was only meant to
be temporary.
The `ASSET_MANAGER` icon is already used for the Asset Browser, so it's being
reused which we normally avoid. So we may still want to create a dedicated one,
maybe a variation of this one.
|
|
Adding 'new' (?) `heading` parameter of some UILayout functions...
|
|
Code was removed in 247b10e6a25b but it was incorrect in first place.
Conversion was done for `offset_x` and `offset_y` channel originally,
but it should be done for `scale_x` and `scale_y`
|
|
Not sure why, but py files from `bl_operators` were never considered for
i18n string extraction... They do define some UI strings though.
|
|
|
|
|
|
OIIO utils are mandatory for a whole set of tests (Cycles, VSE), and
it's a small package, no reason to not install it.
Also re-enabling package handling of OIIO on RPM-based distro, not sure
why it was disabled but this has become a fairly stable and standard
library now, would not expect issues anymore.
|
|
This adds an option (WITH_COMPILER_CCACHE) to build using Ccache if it's
found. Makefiles-based, Ninja-based and Xcode generators are supported.
Pass `-DWITH_COMPILER_CCACHE=ON` to cmake to enable Ccache.
Utility option in GNUmakefile is also added: for e.g.,
`make ninja ccache`.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D9665
|
|
T83989 observes that the Attribute Math node always adds its
operands regardless of its operator setting. This was caused
by an oversight committed in rB23233fcf056e42, which overlooked
adjusting the exec function to use the new storage location.
Differential Revision: https://developer.blender.org/D9909
|
|
|
|
exception when no object in scene
|
|
Normally, pure text buttons have no padding at their edges so they
align with edges of buttons, see D9058. However, in several cases
there are labels aligned to the right side of a list widget row,
so they're missing padding against the right edge.
The fix is to use emboss = 'NONE' for such labels, which changes
the drawing style, adding padding on the right edge. (Normally so
labels aligned with the text from non-embossed buttons). This is
not necessarily intended, but it works properly.
For more information, see the revision.
Differential Revision: https://developer.blender.org/D9874
|
|
Parts of the tool icons for box, circle, lasso, and tweak select that were
meant to be flat or at a 45 degree angle were slightly misaligned, making
the edge look blurry.
|
|
Options added to `sequencer.select_handles()` operator.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D7707
|
|
The convention is to put the label at the bottom of the enum, or in the
spot furthest away from the button. This commit reorders the items in
the "Slot", "Layer", and "Pass" menus to be consistent with this
convention. It also reorders the numbering so that higher numbers are
lower.
The original patch was by Adrian Newton (@TFS), with slight changes
and additions.
Differential Revision: https://developer.blender.org/D7142
|
|
This value was meant to be used for keeping images that are slowest to
render in cache. Method of measurement was flawed, because it doesn't
take UI overhead into consideration.
Cache panel is to be removed because users should not have to tweak
settings like this. It is not useful for development either, therefore
it is removed completely.
|
|
If image is cached twice, it's size has been counted twice as well, but
only image reference count is increased, not memory usage.
Use `MEM_get_memory_in_use()` instead of size own tracking.
|
|
Previously, the Annotation panels were a bit buggy in the movie clip editor.
This commit fixes the issue of the panel in the sidebar would disappear
when selecting "Tracks" if no tracks were added to the clip.
To solve this issue the user if given a label text saying "No annotation source"
This commit also removes some grease pencil operators from the toolbar
that do not work with the new annotation system.
This commit also moves the data source choice from the toolbar to the sidebar.
This is needed to migrate the current toolbar to the new tool system
(see T83612)
Some old invalid code was also removed.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D9729
|
|
This new node increases the radiance of an image by a scalar value.
Previously, the only way to adjust the the exposure of an image was with
math node or using the scene's color management.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D9677
|
|
Previously both `char` and `int` were used to represent this enum.
Differential Revision: https://developer.blender.org/D9903
|
|
|
|
API functions get SEQ_ prefix.
Intern functions get seq_ prefix
Functions also have appropriate category included in name.
|
