| Age | Commit message (Collapse) | Author |
|---|
|
Based on patch by Sebastian Parborg.
|
|
Merge Audaspace fixes from upstream.
|
|
Also remove unnecessary uses of `struct` and add const in one place.
|
|
|
|
Remove need for shadow caustic caster geometry to have a UV layout. UVs were
useful to maintain a consistent tangent frame across the surface while
performing the walk. A consistent tangent frame is necessary for rough
surfaces where a normal offset encodes the sampled h, which should point
towards the same direction across the mesh.
In order to get a continuous surface parametrization without UVs, the
technique described in this paper was implemented:
"The Natural-Constraint Representation of the Path Space for Efficient
Light Transport Simulation" (Supplementary Material), SIGGRAPH 2014.
In addition to implementing this feature:
* Shadow caustic casters without smooth normals are now ignored (triggered
some refactoring and cleaning).
* Hit point calculation was refactored using existing utils functions,
simplifying the code.
* The max number of solver iterations was reduced to 32, a solution is
usually found by then.
* Added generalized geometry term clamping (transfer matrix calculation can
sometimes get unstable).
* Add stop condition to Newton solver for more consistent CPU and GPU result.
* Add support for multi scatter GGX refraction.
Fixes T96990, T96991
Ref T94120
Differential Revision: https://developer.blender.org/D14623
|
|
This is fairly tricky to perform, since there is often very limited
contextual information available about the 'active' hierarchy to
override.
This commit is a first step, it is expected to handle decently well
cases like objects and obdata (recreating necessary object and
collection hierarchy, and/or hooking it to a potential existing
hierarchy), at least in most common cases.
Ref: {T95707}.
|
|
|
|
The UV fix just committed had gotten out of sync with some changes
that had been made inside some comments (spelling and folding).
|
|
Extends the changes started in f31c3f8114616bb to completely separate
much of the DRW curves code from the particle hair drawing. In the short
term this increases duplication, but the idea is to simplify development
by making it easier to do larger changes to the new code, and the new
system will replace the particle hair at some point.
After this, only the shaders themselves are shared.
Differential Revision: https://developer.blender.org/D14699
|
|
Add macros to get/set boolean attributes, to set float2/float3
attributes and to get float2/float3 attributes via pointer access.
Needed for D14365 and further generic attribute integration.
Differential Revision: https://developer.blender.org/D14708
|
|
This substantially redoes the logic by which bevel chooses, for
the middle segment when there are an odd number of segments,
which face to interpolate in, and which vertices to snap to which
edges before doing that interpolation. It changes the UV layouts
of a number of the regression tests, for the better.
An example, in the reference bug, is a cube with all seams, unwrapped
and then packed with some margin around them, now looks much
better in UV space when there are an odd number of segments.
|
|
The original mistake I made in b9febb54a492ac6c938 was thinking
that the input curve object data to `BKE_displist_make_curveTypes`
was already copied from the original. I think I misread some of its
`ID` flags. This commit places the result of curves evaluation in a
duplicated curve instead, and copies the edit mode pointers
necessary for drawing overlays. `Curve` needs to know not to
free those pointers.
I still don't have a full understanding of why some of the tactics I've
used work and others don't. I've probably tried around 8 different
solutions at this point, and this is the best I came up with.
The dependency graph seems to have some handling of edit mode
pointers that make the edit mode overlays work if the evaluated
result is only an empty curve created by the evaluated geometry set.
This doesn't work with the current method and I need to set the
edit mode pointers at the end of evaluation explicitly.
We're constrained by the confusing duality of the old curves system
combined with the new design using the evaluated geometry set.
Older areas of Blender expect the evaluated `Curve` to be a copy
of the original, even if it was replaced by some arbitrary evaluated mesh.
Differential Revision: https://developer.blender.org/D14561
|
|
Regression introduced in
{rB721335553ccb5ce4f7a374b958b7d65befa319df}.
`plane_omat` is only computed if `snap_state->draw_plane` is `true`.
|
|
Caused by a typo/mistake in rB6a3c3c77b3ebdbcd4455.
|
|
|
|
Added some regex magic in i18n py module to also extract UI names from
all of our units definitions.
Those enum values are fully dynamically generated, so they cannot be
extracted from RNA introspection.
|
|
Apply standard green tool color to vertex paint tools, to keep icon
color palette more consistent
https://developer.blender.org/D14694
|
|
Caused by {rBcfa53e0fbeed}
Above commit mixed up source and destination meshes causing bad lookups
on calculated normals.
Now make sure we get normals from our destination mesh to project along.
Note this was only reported for Projected Face Interpolated mode, but
same was true for Projected Edge Interpolated mode (though that one is a
bit weird to test since I think there is generally something wrong with
that mode -- with or without rBcfa53e0fbeed).
Fixes T97528
Maniphest Tasks: T97528
Differential Revision: https://developer.blender.org/D14726
|
|
When in mesh editmode, attributes point to bmesh customdata, the
attribute data is empty since custom data is stored per element instead
of a single array there (same es UVs etc.).
Opposed to e.g. UVs, general attributes were not setting their data
length/size to zero in case of editmode though, which could lead to
- crash in Outliner Data Api view [that was reported in T95922]
- RuntimeError such as the following:
```
RuntimeError: bpy_prop_collection[index]: internal error, valid index 0
given in 8 sized collection, but value not found
```
Now check for mesh editmode in `BKE_id_attribute_data_length` (and
return zero in that case).
Alternatively, the check could also be done in
`rna_Attribute_data_length` only (such as UVs do in
`rna_MeshUVLoopLayer_data_length`).
Ref D11998
Fixes T95922
Maniphest Tasks: T95922
Differential Revision: https://developer.blender.org/D14714
|
|
Regression in 4d0f846b936c9101ecb76a6db962aac2d74a460a,
passing selection through to drag relied on tweak events running
even when the press event was handled which is not the case for drag.
|
|
Fix for T84962
Before the patch, edit voxel size always displayed voxel size without units, just as a number in meters.
Now it changes like in the voxel remesh panel and shows correct units
Video:
{F13009428}
In adaptive mode:
{F13009435}
Reviewed By: JulienKaspar
Maniphest Tasks: T84962
Differential Revision: https://developer.blender.org/D14682
|
|
This change from T97104
Reviewed By: JulienKaspar, jbakker
Maniphest Tasks: T97104
Differential Revision: https://developer.blender.org/D14620
|
|
Changed tool order as proposed in [[ https://developer.blender.org/T97206 | T97206 ]]
{F12987559}
Reviewed By: JulienKaspar, jbakker
Maniphest Tasks: T97206
Differential Revision: https://developer.blender.org/D14612
|
|
Hide region for preview and sequencer/preview combined view.
|
|
This adds pyproject.toml, needed to configure defaults for autopep8.
The file is auto-discovered in a similar way to .clang-format, other
tools could be configured here too. For now just configure autopep8 so
this can be enabled in IDE's without causing unexpected edits such as
wrapping lines over 80 columns in width.
Now autopep8 can be used from the root directory by running: autopep8 .
This uses multiple-jobs to run autopep8 over all Python scripts except
paths that are explicitly ignored in exclude defined by pyproject.toml.
Reviewed By: mont29, brecht, sybren
Ref D14686
|
|
|
|
This enables building of HIP binaries for AMD RDNA and RDNA2 GPUs.
This requires the 22.10 / ROCm 5.1 driver.
Ref T91571
Differential Revision: https://developer.blender.org/D14360
|
|
Draw area background even when there is no sequencer data.
|
|
|
|
If the attribute already existed, but had a different domain or data type
than the user tried to write to it with (i.e. writing to `position` with
a float), then the data from field evaluation wasn't freed.
This restructures the geometry nodes modifier attribute writing process
to solve that problem and remove some of the nested if statements
that made the process confusing.
One case that still doesn't work is writing to a builtin attribute from
a different domain. If `OutputAttribute` gets that feature then that
could be supported here too.
Differential Revision: https://developer.blender.org/D14706
|
|
The problem is old.
rB52be06301257 (fixed by rB4b35d6950d4f) just masked it.
`Object->data`, on evaluated objects, is not a safe pointer to get
objects with the same `BMEditData`.
Use `Object->runtime.data_orig` instead.
|
|
|
|
As `GPU_PRIM_LINE_LOOP` is not supported on Vulkan or Metal and
`GPU_PRIM_TRI_FAN` is not supported on Metal, they will be removed in
future releases.
So it is important to inform users that they are obsolete and may not
be supported for a long time.
Release Notes: https://wiki.blender.org/wiki/Reference/Release_Notes/3.2/Python_API
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14679
|
|
These are only needed for the legacy GPU renderer, which we don't use.
|
|
For more easily reading and writing ACEScg EXR files.
|
|
Property collection functions were not really in sync which could result
in crashes in UI_LISTS.
The reason is that attributes of type color defined on domains other than
Points or Corners are still valid, but should really be skipped for the
special "color_attributes".
`rna_AttributeGroup_color_length` itself was fine here, it skips these,
but the iterator (`rna_AttributeGroup_color_iterator_begin` /
`rna_Attributes_noncolor_layer_skip`) wasnt, so when a UI_LIST
filter_items() would iterate the collection it would actually get
results were it shouldnt.
Now check a suiting domain in `rna_Attributes_noncolor_layer_skip` as
well.
Maniphest Tasks: T97502
Differential Revision: https://developer.blender.org/D14717
|
|
Since {rBeae36be372a6b16ee3e76eff0485a47da4f3c230} the distinction
between float and byte colors is more explicit in the ui. So far, geometry
nodes couldn't really deal with byte colors in general. This patch fixes that.
There is still only one color socket, which contains float colors. Conversion
to and from byte colors is done when read from or writing to attributes.
* Support writing to byte color attributes in Store Named Attribute node.
* Support converting to/from byte color in attribute conversion operator.
* Support propagating byte color attributes.
* Add all the implicit conversions from byte colors to the other types.
* Display byte colors as integers in spreadsheet.
Differential Revision: https://developer.blender.org/D14705
|
|
Previously this would silently return `None`.
Now the behavior is similar to when new sockets are added to a node.
|
|
Add back a patch wrongly removed by rBb9c37608a9e9, and add another fix,
for gcc11 build support.
Re {T95206}.
|
|
The issue was that the executor would forget about the caller provided
storage if the variable is destructed.
|
|
This adds a new subpanel to the geometry nodes modifier which is just
used to display information about used attributes.
* A new panel is used because adding this information anywhere else
clutters the ui too much imo.
* The general layout is similar to that in the tooltip. I found it to be more
trouble than it's worth to share this code.
Possible future improvements:
* Don't show the panel if there are no used named attributes.
* Add some heuristics to determine which named attributes the user does
not have to care about because they are only used in the node group
and don't affect anything else.
Differential Revision: https://developer.blender.org/D14701
|
|
Ref T97444.
Differential Revision: https://developer.blender.org/D14700
|
|
Very easy fix, the bug seemed to be a result of a typo on the right-most margin.
Old: {F13013777}
New: {F13013782}
Maniphest Tasks: T97497
Differential Revision: https://developer.blender.org/D14711
|
|
This was projecting the unnormalized z scale axis onto the plane defined
by the view vector. If object scale was very small, this made the empty
still visible at viewing angles far from the object axis.
Now use the normalized z scale axis to make this work the same at all
object scales.
Fixes T97004.
Maniphest Tasks: T97004
Differential Revision: https://developer.blender.org/D14557
|
|
This was possible with the gizmo, but no using the operator (e.g. from
the sidebar).
Now store original offsets and reset to these on calcel (ESC or RMB).
Maniphest Tasks: T97465
Differential Revision: https://developer.blender.org/D14704
|
|
in workbench_engine.c
|
|
Text inserted via TEXT_OT_insert would always have auto-close
logic applies which interfered any insertion of literal strings
containing brackets.
Now auto-closing brackets is restricted to characters read from
events from the operators invoke functions.
|
|
|
|
|
|
few warnings.
|
