| Age | Commit message (Collapse) | Author |
|---|
|
´´´
error C4133: 'function': incompatible types - from 'float [2]' to 'int *'
error C4133: 'function': incompatible types - from 'const int [2]' to 'const float *'
´´´
|
|
|
|
Both material and world assets should be ready to use as non-experimental
feature. They were not enabled by default yet because the work from the
previous commit was needed first.
Objects should follow soon.
Maniphest Task: https://developer.blender.org/T91752
|
|
Updates UI code so that we can enable the asset UI for specific data-block
types by default, i.e. irrespective of the "Extended Asset Browser"
experimental feature.
"Mark as Asset" and "Clear Asset" are always visible in the Outliner context
menu now, but are grayed out if not applicable and show a disabled hint in the
tooltip.
A known side-effect of this: The "Mark as Asset" and "Clear Asset" operators
are enabled for action data-blocks now, even though only pose actions created
through the Pose Libraries add-on are supported. If this is something worth
addressing is being discussed still.
Differential Revision: https://developer.blender.org/D12955
Reviewed by: Sybren Stüvel
|
|
Also fixes incompatible types.
|
|
The viewport was being changed, so it needs to be reset.
|
|
|
|
This triggered a compiler bug where it does not handle the sub.s16 PTX
instruction. Instead refactor the code so we don't need to do uint16_t
subtraction at all.
Also update OptiX device to remove the AO pass direct callable.
Thanks Patrick Mours for figuring this out.
|
|
Add the new zstandard module, as well as previously missing ones.
Ref D12777, T88438
|
|
|
|
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
|
|
This adds attribute search to the geometry nodes modifier
for the input and output attributes. The "New" search item
is only shown for the output attributes.
Some of the attribute search code is extracted to a new file
in the interface code, to avoid some code duplication.
The UI code required two fixes so that the search would work
for dynamic length strings (IDProperties do not have a fixed size).
Since this does changes to the UI layout of the modifier, I also
addressed T91485 here.
Differential Revisiion: https://developer.blender.org/D12788
|
|
Overlapped regions have transparent backgrounds, so when placing
AZONE_REGION we need to move them in to the content edge.
See D12956 for details and examples.
Differential Revision: https://developer.blender.org/D12956
Reviewed by Hans Goudey
|
|
|
|
This commit makes the bounding box node work on each unique geometry
(including instances) individually instead of making one large bounding
box for everything. This makes the node much faster, and is often the
desired result anyway. For the old behavior, a realize instances node
can be used in front of this node (versioning adds it automatically).
The min and max outputs now only output the values from the realized
geometry.
Differential Revision: https://developer.blender.org/D12951
|
|
The parameter is only used in an assert.
|
|
To display the "disabled hint" (text explaining why a button is disabled) in a
tooltip, it would run the operator poll callback, which could then set a poll
message. But the context for the poll check wasn't the one from the button, so
the poll may give a different result (and disabled hint) than the check of the
button itself did.
Make sure it uses the exact context from the button.
|
|
No functional changes necessary, test already succeeds.
|
|
|
|
When renaming an asset catalog, also update its simple name.
Catalogs will most likely be created from within Blender, so via the
catalog tree in the asset browser. Here catalogs are always named
"Catalog" until the user renames them, which was reflected in all simple
names being "Catalog".
|
|
When there are multiple catalogs with the same path (so different UUIDs
all mapped to the same catalog path), treat the first-loaded one as the
main catalog for that path, and the rest as aliases.
This ensures that the UUID of a catalog (as chosen in the tree UI and thus
interacted with by users) is stable, regardless of whether by some coincidence
later another catalog with the same UUID is created.
|
|
Rename `AssetCatalogPathCmp` to `AssetCatalogLessThan`:
- it compares more than paths (so no more `Path` in the name), and
- performs a less-than operation (so no more `Cmp` in the name).
Also restructure its code to make an extra upcoming comparison easier to
add.
No functional changes.
|
|
There were some issues when multiple inputs of the same node
were forced to be computed (e.g. for the spreadsheet), but none
of the node outputs (if existant) were used. Essentially the node
was marked as "finished" too early in this case.
This fix is necessary for the improved viewer node (T92167).
|
|
In the future `NodeTreeRef` could have a lazy initialized map,
but for now this is good enough.
|
|
Similar to main path compaction that happens before adding work tiles, this
compacts shadow paths before launching kernels that may add shadow paths.
Only do it when more than 50% of space is wasted.
It's not a clear win in all scenes, some are up to 1.5% slower. Likely caused
by different order of scheduling kernels having an unpredictable performance
impact. Still feels like compaction is just the right thing to avoid cases
where a few shadow paths can hold up a lot of main paths.
Differential Revision: https://developer.blender.org/D12944
|
|
It was still looking for the 3.7 folder
rather than 3.9
|
|
This is mainly for doversion code, when it needs to create new IDs those
should be considered as part of the same library as the current Main's
one.
No practical changes are expected here, this is more of a general
consistency fix, and a pre-requisite for {T92333}.
|
|
Add a check for zero length edges to the manifold check as quadriflow
doesn't handle meshes with these.
|
|
Caused by {rB43167a2c251b}
Code from above commit called RNA updates with a NULL scene.
This was already commented (and mostly handled) in rB5949d598bc33, but
the reported case was missing in that commit.
This fixes the crash in a similar manner as rB5949d598bc33.
Maniphest Tasks: T92272
Differential Revision: https://developer.blender.org/D12953
|
|
Since the introduction in rBfc5bf09fd88c, `BKE_pose_minmax` was not
taking these custom transforms into account (making "View Selected"
ignoring these as well and focusing on the bone instead).
Now consider these transforms in `BKE_pose_minmax`.
Maniphest Tasks: T92169
Differential Revision: https://developer.blender.org/D12942
|
|
This package allows Python scripts to handle compressed blend files (see
rB2ea66af742bc). This is for example needed by Blender Asset Tracer to
send files to a Flamenco render farm.
This change includes a new `WITH_PYTHON_INSTALL_ZSTANDARD` build-time
option, to control whether to actually install the package. For this the
already-existing approach for Requests was copied.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
|
|
certifi : 2020.12.5 → 2021.10.8
chardet : 4.0.0 → charset-normalizer 2.0.6
cython : 0.29.21 → 0.29.24
idna : 2.10 → 3.2
numpy : 1.19.5 → 1.21.2 (which makes it possible to remove our patch)
requests: 2.25.1 → 2.26.0
urllib3 : 1.26.3 → 1.26.7
Nowadays `requests` no longer depends on `chardet` but on
`charset-normalizer`. That project describes itself as:
> A library that helps you read text from an unknown charset encoding.
> Motivated by chardet, I'm trying to resolve the issue by taking a new
> approach. All IANA character set names for which the Python core library
> provides codecs are supported.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
|
|
Bump Python from 3.9.2 to 3.9.7, which is the latest 3.9 release at this
moment.
Updates to bundled Python packages will follow in a separate commit.
Reviewed By: LazyDodo, mont29, brecht
Differential Revision: https://developer.blender.org/D12777
|
|
Ref D12834
|
|
Apple's international keyboards have an additional `kVK_ISO_Section`
key. With some (Italian, Spanish) keyboard layouts, this is `\`, `[` keys
which Blender keymap can use.
Right now this key is explicitly set as `Unknown`.
Note that `kVK_ANSI_Grave` is located in a different location.
Differential Revision: https://developer.blender.org/D12905
|
|
No need to report this, it just adds noise to the cmake config. The messages
that we need to keep are the ones about disabling tests when the test file or
idiff are missing.
|
|
When appending an asset from the asset browser, its asset data needs to
be cleared.
However, linking an asset (or regular append from the file browser)
should not clear such data. In linking case, it would be there again
after a blend file reload anyway.
So this commit introduces a new `BLO_LIBLINK_APPEND_ASSET_DATA_CLEAR`
option.
NOTE: in case the appended ID needs to be copied from its linked data
(instead of making the later directly local), asset data is lost anyway
since it is never copied with the ID currently.
Ref. {T91749} and D11768.
|
|
|
|
Show the scaled down tool icon when the tool region is collapsed. Show a
blank space when the tool region is visible.
* Minimize the UI flickering when changing the active tool.
* Show the active tool when the tool region is collapsed.
* Smaler header footprint (the tool name is not visible).
This is a follow up for T91536.
Differential Revision: https://developer.blender.org/D12939
|
|
This was caused by rB40c3b8836b7a36303ea9c78b0932758cbf277f93.
The same fix exists in the Distribute Points on Faces node.
|
|
We define the minimum exclusive number for our supported dependencies
versions, and not the maximum inclusive number.
Thanks to @sybren for raising this point and finding the 'mex' math
term.
|
|
|
|
|
|
|
|
|
|
|
|
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Missed in rB69102786047dccdcbaee0df6307a8c3364d28fe0.
|
|
Appended objects could be hidden, making any further operations
potentially skip the newly added objects.
Now FILE_AUTOSELECT asserts when newly added options aren't selectable.
|
|
De-duplicates wm_append_loose_data_instantiate_object_base_instance_init
and object_base_instance_init.
Add BLO_object_instantiate_object_base_instance_init which also adds to
a collection since all callers did this.
|
|
|
