Age | Commit message (Collapse) | Author |
|
This is for design task T67744, Boolean Redesign.
It adds a choice of solver to the Boolean modifier and the
Intersect (Boolean) and Intersect (Knife) tools.
The 'Fast' choice is the current Bmesh boolean.
The new 'Exact' choice is a more advanced algorithm that supports
overlapping geometry and uses more robust calculations, but is
slower than the Fast choice.
The default with this commit is set to 'Exact'. We can decide before
the 2.91 release whether or not this is the right choice, but this
choice now will get us more testing and feedback on the new code.
|
|
Add `-Wno-maybe-uninitialized` option to `CMAKE_CXX_FLAGS_RELEASE` and
`CMAKE_CXX_FLAGS_RELWITHDEBINFO` variables on GCC/Linux.
In Release builds GCC's `-Wmaybe-uninitialized` warning is unreliable,
and thus causes noise that can drown out other warnings. These warnings
are now silenced in release mode builds.a
Debug builds seem fine, so flags for debug builds are not touched by
this commit.
No functional changes.
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D8615
|
|
Fix package name missmatch in a few module files. IE "ALEMBIC" was
defined in the file but the find_package commands used "Alembic"
Some modules state that they set and use the _LIBRARY variable but the
do in fact not do this. Removed these comments from those files.
|
|
Required for the new boolean code, disabled by default
until all platforms have landed the libs and the boolean
code actually lands in master.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8384
|
|
In the situation where the precompiled libraries are used on Linux +
GCC, a version of GCC older than 9.3 is guaranteed to cause problems.
This just implents a fatal error message when we know it doesn't make
sense to continue. We could do more checks and add some warnings, but
it's very likely that these will be ignored amongst the other noise.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8396
|
|
This is a follup to 0c384362272.
No functional changes to Blender, just the build scripts.
|
|
|
|
|
|
Matches WITH_GHOST_{SDL|WAYLAND}
|
|
Usable with the CMake option 'WITH_GHOST_WAYLAND'
The following functionality is working:
- Building with X11 and Wayland at the same time,
wayland is used when available.
- Keyboard, pointer handling.
- Cursor handling.
- Dedicated off-screen windows.
- Drag & drop.
- Copy & paste.
- Pointer grabbing.
See D6567 for further details.
|
|
Can give considerably faster linking, especially for debug builds.
This may be enabled by default but needs to be more thoroughly tested.
|
|
Otherwise file browsers do not recognize the Blender executable. This is
already done for official releases.
We leave it off for non-portable builds, since that's how Linux distribution
packages will typically build Blender and we can continue to follow the OS
default there. Using a file browser to launch executables from e.g. /usr/bin
would be rare as wel.
Differential Revision: https://developer.blender.org/D7363
|
|
Following up to b555b8d.
Building Blender with hidden symbols but using libraries with visible symbols
was giving linker warnings, specifically for USD. So revert that for now, as
it was not needed for the bugfix.
Hide USD symbols (some of which are not in the USD namespace) to avoid potential
conflicts. May potentially help with AMD OpenCL issues in T74262.
|
|
|
|
On macOS this is part of the collada folder, but for Linux xml2 is in its own
folder for precompiled libraries.
|
|
Differential Revision: https://developer.blender.org/D7309
|
|
This means symbols from Blender itself and most external libraries. We can't
just hide all because that breaks some libraries. The better solution would
be to rebuild all library dependencies with hidden visibility.
Fixes T75223: Luxrender add-on failing to load on macOS
|
|
The OpenXR-SDK contains utilities for using the OpenXR standard
(https://www.khronos.org/openxr/). Namely C-headers and a so called
"loader" to manage runtime linking to OpenXR platforms ("runtimes")
installed on the user's system.
The WITH_XR_OPENXR build option is disabled by default for now, as there
is no code using it yet. On macOS it will remain disabled for now, it's
untested and there's no OpenXR runtime in sight for it.
Some points on the OpenXR-SDK dependency:
* The repository is located at
https://github.com/KhronosGroup/OpenXR-SDK (Apache 2).
* Notes on updating the dependency:
https://wiki.blender.org/wiki/Source/OpenXR_SDK_Dependency
* It contains a bunch of generated files, for which the sources are in a
separate repository
(https://github.com/KhronosGroup/OpenXR-SDK-Source).
* We could use that other repo by default, but I'd rather go with the
simpler solution and allow people to opt in if they want advanced dev
features.
* We currently use the OpenXR loader lib from it and the headers.
* To use the injected OpenXR API-layers from the SDK (e.g. API
validation layers), the SDK needs to be compiled from this other
repository.
The extra "XR_" prefix in the build option is to avoid mix-ups of OpenXR
with OpenEXR.
Most of this comes from the 2019 GSoC project, "Core Support of Virtual
Reality Headsets through OpenXR"
(https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Differential Revision: https://developer.blender.org/D6188
Reviewed by: Campbell Barton, Sergey Sharybin, Bastien Montagne, Ray
Molenkamp
|
|
Based on work by Nathan Craddock, with further changes to apply it to all
precompiled libraries.
Differential Revision: https://developer.blender.org/D6929
|
|
Bringing Embree's motion blur closer to Cycles' native blur.
This requries Embree 3.8.0 or newer.
Differential Revision: https://developer.blender.org/D6575
|
|
Adding USD to a lite build fails to build due to boost errors, when you turn
boost on and rebuild still boost errors, boost was silently turned off since
it was not deemed needed. Once boost was forced on, it still fails due to TBB
being off.
This patch fixes:
- The Silent disabling of boost
- Add a check that USD is is not on before doing that
- move the TBB checks to a central location rather than the individual platform files
- Add USD to the TBB checks.
Differential Revision: https://developer.blender.org/D6479
Reviewers: brecht, sybren
|
|
|
|
Finding X11 before platform libs caused freetype not to use
pre-compiled libraries.
|
|
When building with precompiled libraries on Linux, CMake used boost libs
from the system outside the lib dir. This restricts CMake to use only the
libraries from the precompiled libraries.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6659
|
|
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
|
|
This commit introduces the first version of an exporter to Pixar's
Universal Scene Description (USD) format.
Reviewed By: sergey, LazyDodo
Differential Revision: https://developer.blender.org/D6287
- The USD libraries are built by `make deps`, but not yet built by
install_deps.sh.
- Only experimental support for instancing; by default all duplicated
objects are made real in the USD file. This is fine for exporting a
linked-in posed character, not so much for thousands of pebbles etc.
- The way materials and UV coordinates and Normals are exported is going
to change soon.
- This patch contains LazyDodo's fixes for building on Windows in D5359.
== Meshes ==
USD seems to support neither per-material nor per-face-group
double-sidedness, so we just use the flag from the first non-empty
material slot. If there is no material we default to double-sidedness.
Each UV map is stored on the mesh in a separate primvar. Materials can
refer to these UV maps, but this is not yet exported by Blender. The
primvar name is the same as the UV Map name. This is to allow the
standard name "st" for texture coordinates by naming the UV Map as such,
without having to guess which UV Map is the "standard" one.
Face-varying mesh normals are written to USD. When the mesh has custom
loop normals those are written. Otherwise the poly flag `ME_SMOOTH` is
inspected to determine the normals.
The UV maps and mesh normals take up a significant amount of space, so
exporting them is optional. They're still enabled by default, though.
For comparison: a shot of Spring (03_035_A) is 1.2 GiB when exported
with UVs and normals, and 262 MiB without. We probably have room for
optimisation of written UVs and normals.
The mesh subdivision scheme isn't using the default value 'Catmull
Clark', but uses 'None', indicating we're exporting a polygonal mesh.
This is necessary for USD to understand our normals; otherwise the mesh
is always rendered smooth. In the future we may want to expose this
choice of subdivision scheme to the user, or auto-detect it when we
actually support exporting pre-subdivision meshes.
A possible optimisation could be to inspect whether all polygons are
smooth or flat, and mark the USD mesh as such. This can be added when
needed.
== Animation ==
Mesh and transform animation are now written when passing
`animation=True` to the export operator. There is no inspection of
whether an object is actually animated or not; USD can handle
deduplication of static values for us.
The administration of which timecode to use for the export is left to
the file-format-specific concrete subclasses of
`AbstractHierarchyIterator`; the abstract iterator itself doesn't know
anything about the passage of time. This will allow subclasses for the
frame-based USD format and time-based Alembic format.
== Support for simple preview materials ==
Very simple versions of the materials are now exported, using only the
viewport diffuse RGB, metallic, and roughness.
When there are multiple materials, the mesh faces are stored as geometry
subset and each material is assigned to the appropriate subset. If there
is only one material this is skipped.
The first material if any) is always applied to the mesh itself
(regardless of the existence of geometry subsets), because the Hydra
viewport doesn't support materials on subsets. See
https://github.com/PixarAnimationStudios/USD/issues/542 for more info.
Note that the geometry subsets are not yet time-sampled, so it may break
when an animated mesh changes topology.
Materials are exported as a flat list under a top-level '/_materials'
namespace. This inhibits instancing of the objects using those
materials, so this is subject to change.
== Hair ==
Only the parent strands are exported, and only with a constant colour.
No UV coordinates, no information about the normals.
== Camera ==
Only perspective cameras are supported for now.
== Particles ==
Particles are only written when they are alive, which means that they
are always visible (there is currently no code that deals with marking
them as invisible outside their lifespan).
Particle-system-instanced objects are exported by suffixing the object
name with the particle's persistent ID, giving each particle XForm a
unique name.
== Instancing/referencing ==
This exporter has experimental support for instancing/referencing.
Dupli-object meshes are now written to USD as references to the original
mesh. This is still very limited in correctness, as there are issues
referencing to materials from a referenced mesh.
I am still committing this, as it gives us a place to start when
continuing the quest for proper instancing in USD.
== Lights ==
USD does not directly support spot lights, so those aren't exported yet.
It's possible to add this in the future via the UsdLuxShapingAPI. The
units used for the light intensity are also still a bit of a mystery.
== Fluid vertex velocities ==
Currently only fluid simulations (not meshes in general) have explicit
vertex velocities. This is the most important case for exporting
velocities, though, as the baked mesh changes topology all the time, and
thus computing the velocities at import time in a post-processing step
is hard.
== The Building Process ==
- USD is built as monolithic library, instead of 25 smaller libraries.
We were linking all of them as 'whole archive' anyway, so this doesn't
affect the final file size. It does, however, make life easier with
respect to linking order, and handling upstream changes.
- The JSON files required by USD are installed into datafiles/usd; they
are required on every platform. Set the `PXR_PATH_DEBUG` to any value
to have the USD library print the paths it uses to find those files.
- USD is patched so that it finds the aforementioned JSON files in a path
that we pass to it from Blender.
- USD is patched to have a `PXR_BUILD_USD_TOOLS` CMake option to disable
building the tools in its `bin` directory. This is sent as a pull
request at https://github.com/PixarAnimationStudios/USD/pull/1048
|
|
It should no longer be tied to OpenVDB and OpenImageDenoise then.
Differential Revision: https://developer.blender.org/D6029
|
|
The goal is to make it able to use pre-compiled CentOS libraries on a
more modern system. Main issue was that it's possible that the compiler
on a newer version is defaulting to different C++11 ABI.
This change makes it so that if there is NO native libraries in the
lib folder and there IS pre-compiled CentOS folder, it will be used and
compiler will be forced to old ABI.
Differential Revision: https://developer.blender.org/D6031
|
|
This node is built on Intel's OpenImageDenoise library.
Other denoisers could be integrated, for example Lukas' Cycles denoiser.
Compositor: Made OpenImageDenoise optional, added CMake and build_env files to find OIDN
Compositor: Fixed some warnings in the denoising operator
build_environment: Updated OpenImageDenoise to 0.8.1
build_environment: Updated OpenImageDenoise in `make deps` for macOS
Reviewers: sergey, jbakker, brecht
Reviewed By: brecht
Subscribers: YAFU, LazyDodo, Zen_YS, slumber, samgreen, tjvoll, yeus, ponomarovmax, getrad, coder.kalyan, vitos1k, Yegor, DeepBlender, kumaran7, Darkfie9825, aliasguru, aafra, ace_dragon, juang3d, pandrodor, cdog, lordodin, jtheninja, mavek, marcog, 5k1n2, Atair, rawalanche, 0o00o0oo, filibis, poor, lukasstockner97
Tags: #compositing
Differential Revision: https://developer.blender.org/D4304
|
|
D5296 by @frispete
|
|
|
|
This enables static linking of libstdc++ by default when building using
`WITH_STATIC_LIBS`. This makes builds more portable for anyone making
static builds (in particular for older systems).
Reviewed By: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4393
|
|
Following removal from C source code.
See: 8c68ed6df16d8893
|
|
|
|
|
|
Just use one flag which enables OpenSubdiv globally for all the
areas of Blender.
|
|
|
|
Note that this is turned off by default and must be enabled at build time with the CMake WITH_CYCLES_EMBREE flag.
Embree must be built as a static library with ray masking turned on, the `make deps` scripts have been updated accordingly.
There, Embree is off by default too and must be enabled with the WITH_EMBREE flag.
Using Embree allows for much faster rendering of deformation motion blur while reducing the memory footprint.
TODO: GPU implementation, deduplication of data, leveraging more of Embrees features (e.g. tessellation cache).
Differential Revision: https://developer.blender.org/D3682
|
|
|
|
Differential Revision: https://developer.blender.org/D3700
|
|
|
|
Works similar to how maxOS deals with this.
|
|
|
|
Without this find_package(ZLIB) will find ZLib from OpenCollada folder,
which has older ABI and is not what was used to link PNG against.
|
|
|
|
|
|
|
|
disable WITH_OPENVDB_BLOSC if Blosc libraries cannot be found.
|
|
|
|
Use the libraries if they exist in ../lib/linux_x86_64 or similar, so
that you can run "make deps && make full" to get a full static build.
Note that install_deps.sh is still the only officially supported way to
build Blender dependencies on Linux, but this may be useful to some.
Differential Revision: https://developer.blender.org/D2980
|