| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Cycles needed this to build properly after switching to the newly built
libraries.
|
|
Building against the existing 3.1 libraries should continue to work, until
the precompiled libraries are committed for all platforms.
* Enable WebP by default.
* Update Windows for new library file names.
* Automatically clear outdated CMake cache variables when upgrading to new
libraries.
* Fix static library linking order issues on Linux for OpenEXR and OpenVDB.
Implemented by Ray Molenkamp, Sybren Stüvel and Brecht Van Lommel.
Ref T95206
|
|
Replace multiple hashes with over-lines for make_source_archive.py.
|
|
In preparation of upcoming SDL upgrade, which uses these.
|
|
Adds support for linking with some of the dependencies of a USD
build instead of the precompiled libraries from Blender, specifically
OpenSubdiv, OpenVDB and TBB. Other dependencies keep using the
precompiled libraries from Blender, since they are linked statically
anyway so it does't matter as much. Plus they have interdependencies
that are difficult to resolve when only using selected libraries from
the USD build and can't simply assume that USD was built with all
of them.
This patch also makes building the Hydra render delegate via the
standalone repository work and fixes various small issues I ran into
in general on Windows (e.g. the use of both fixed paths and
`find_package` did not seem to work correctly). Building both the
standalone Cycles application and the Hydra render delegate at the
same time is supported now as well (the paths in the USD plugin JSON
file are updated accordingly).
All that needs to be done now to build is to specify a `PXR_ROOT`
or `USD_ROOT` CMake variable pointing to the USD installation,
everything else is taken care of automatically (CMake targets are
loaded from the `pxrTargets.cmake` of USD and linked into the
render delegate and OpenSubdiv, OpenVDB and TBB are replaced
with those from USD when they exist).
Differential Revision: https://developer.blender.org/D14523
|
|
the shortcut placed on the desktop and in the start
menu on windows were labelled `blender` rather than `Blender`
spotted by @Severin
|
|
The webp variables should only be set if
the libs actually exist in the lib folder
|
|
|
|
Currently only supports single image frames (no animation possible).
If quality slider is set to 100 then lossless compression will be used,
otherwise lossy compression is used.
Gives about 35% reduction of filesize save when re-saving splash screens with lossless
compression.
Also saves much faster, up to 15x faster than PNG with a better compression ratio as a plus.
Note, this is currently left disabled until we have WebP libs (see T95206)
For testing precompiled libs can be downloaded from Google:
https://storage.googleapis.com/downloads.webmproject.org/releases/webp/index.html
Differential Revision: https://developer.blender.org/D1598
|
|
rBc1909770e7f192574ea62449dd14b4254637e604 introduced "PXR_LIB_PREFIX" for building the
dependencies, so only makes sense to use the same name in the Hydra render delegate CMake too
|
|
This patch adds a Hydra render delegate to Cycles, allowing Cycles to be used for rendering
in applications that provide a Hydra viewport. The implementation was written from scratch
against Cycles X, for integration into the Blender repository to make it possible to continue
developing it in step with the rest of Cycles. For this purpose it follows the style of the rest of
the Cycles code and can be built with a CMake option
(`WITH_CYCLES_HYDRA_RENDER_DELEGATE=1`) similar to the existing standalone version
of Cycles.
Since Hydra render delegates need to be built against the exact USD version and other
dependencies as the target application is using, this is intended to be built separate from
Blender (`WITH_BLENDER=0` CMake option) and with support for library versions different
from what Blender is using. As such the CMake build scripts for Windows had to be modified
slightly, so that the Cycles Hydra render delegate can e.g. be built with MSVC 2017 again
even though Blender requires MSVC 2019 now, and it's possible to specify custom paths to
the USD SDK etc. The codebase supports building against the latest USD release 22.03 and all
the way back to USD 20.08 (with some limitations).
Reviewed By: brecht, LazyDodo
Differential Revision: https://developer.blender.org/D14398
|
|
Since USD 21.11 the libraries are prefixed with "usd_", i.e.
"libusd_m.a" became "libusd_usd_m.a". This commit adjusts our
`usd.cmake` (for building USD) and `FindUSD.cmake` (for finding the USD
libraries) so that they work with and without this `usd_` prefix.
See for more info:
https://github.com/PixarAnimationStudios/USD/blob/release/CHANGELOG.md#2111---2021-11-01
Reviewed By: LazyDodo, brecht, mont29
Differential Revision: https://developer.blender.org/D14334
|
|
Contributed by luzpaz.
Differential Revision: https://developer.blender.org/D14203
|
|
This isn't needed for building Blender so move this along side
other source checking scripts.
|
|
|
|
Atomic operations performed by the C++ standard library might require
libatomic on platforms which do not have hardware support for those
operations.
This change makes it that such configurations are automatically detected
and -latomic is added when needed.
Differential Revision: https://developer.blender.org/D14106
|
|
|
|
I noticed that there were a few variables that should not be visible per default.
It seems to me to simply be an oversight, so I went ahead and cleaned them up.
Reviewed By: Sybren, Ray molenkamp
Differential Revision: http://developer.blender.org/D14132
|
|
|
|
FindOpenImageIO was updated to link to separate OpenImageIO_Util for new
versions, where it is required. For older versions, we can not link to it
because there will be duplicated symbols.
Ref D14128
|
|
FindOpenEXR was updated to find new lib names and separate Imath. It's all
added to the list of OpenEXR include dirs and libs.
This keeps it compatible with both version 2 and 3 for now, and doesn't
require changes outside the find module.
Ref D14128
|
|
|
|
|
|
|
|
|
|
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
This doesn't bump the minimum version, see D13943.
|
|
Also minor white-space & case changes.
|
|
Also minor wording improvements.
|
|
|
|
|
|
The lower bar for building blender
is now MSVC 2019 16.9.16.
|
|
This reverts commit 086f1911698154edd4cc19dc966e966bb0060917.
There was apparently a problem using APPEND which wasn't referenced
in the commit log.
Added comment noting the reason for the discrepancy.
|
|
|
|
This was already done for APPLE & WIN32, which would
reference these libraries twice.
Now append BROTLI_LIBRARIES to FREETYPE_LIBRARIES when they're
required for linking.
No functional changes as all references to FREETYPE_LIBRARIES also
used BROTLI_LIBRARIES.
|
|
|
|
When LIBDIR existed, searching for system libraries would always
first search 'LIBDIR'.
This meant "WITH_SYSTEM_*" would still prefer LIBDIR versions of
libraries if they exist.
The presence of LIBDIR also ignored the setting for WITH_STATIC_LIBS
which is now restored to the cached value once pre-compiled libraries
have been handled.
|
|
The Brotli library only needs to be explicitly linked when using the
statically linked libraries. When using system libs they're shared, and
the .so loading mechanism takes care of dependencies.
|
|
Brotli seems to add a custom postfix to its static libraries by default,
but in Debian at least libraries are just named the same for both shared
and static versions, as usual.
So add standard name after static-specific ones.
Follow-up to rB4c617c06e9cb and rBa000de7c2a4d.
|
|
Use a `FindBrotli.cmake` module instead of manually appending library
paths.
This is just for Linux; Windows and macOS will be reviewed separately.
|
|
Add `libbrotlidec-static.a` and `libbrotlicommon-static.a` to the CMake
`$FREETYPE_LIBRARIES` variable; they'll be required when the Linux libs
for the FreeType upgrade lands (D13448).
The order of libraries is different compared to the similar lines in the
Windows and Apple CMake files, to prevent linker errors on Linux.
|
|
Ref D13448, T93161
|
|
freetype now depends on brotli
|
|
The UI team requested adding woff2 support to freetype.
this required a new dependency brotli.
This changes adds brotili to the builder and bumps
freetype to version 2.11.0
As freetype now depends on other libraries, for consistency
all use of ${FREETYPE_LIBRARY} in cmake has been updated to
use ${FREETYPE_LIBRARIES} adjustments have been made in the
windows platform file, all other platforms use cmake's
FindFreeType.cmake which already sets this variable.
reviewed by: brecht
Differential Revision: https://developer.blender.org/D13448
|
|
The default installation path uses `libexec`, missed this as the
package for Arch replaces this with `lib`,
now both are checked.
|
|
|
|
Since the option to enable linkers are booleans,
it's possible to enable them all at once.
Now only the first enabled + available linker is used
(with priority given to link is with better performance).
|
