| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Thanks Brecht and Thomas for reviewing ;)
|
|
(No news is good news).
|
|
|
|
- script execution is off by default
- if a blend file attempts to execute a script
this shows a message in the header with the action
that was suppressed (script/driver/game-autostart) and 2 buttons to either reload the file trusted, or to ignore the message.
- the file selector will always default to use the trust setting in the user preferences,
but reloading an open file will keep using the current setting (whatever was set before or set on the command-line).
- added SCons setting WITH_BF_PYTHON_SECURITY, this sets the default state for the user prefereces not to trust blend files on load.
... this option was in CMake before, but always off, now its enabled by default for SCons and CMake, and forced on in CMake for now.
|
|
* Better handling of "multiarch" python stuff (libs also need two different paths).
* Fix Opencollada default paths.
Hopefully this won't break anything...
|
|
|
|
|
|
|
|
Added new build option WITH_JACK_DYNLOAD for CMake and
WITH_BF_JACK_DYNLOAD for SCons, which means there'll be
no build-time linking against libjack and getting symbols
from libjack will happen runtime using dlopen and dlsym
tricks.
Alternative would be to use weak linking, but it'll require
having wrapper for preloading libjack.
This new options are disabled by default and they only
intended to be used on linux. Other platforms shall not
be using this and there shall be no functional changes
on non-linux platforms at all.
|
|
You served well and now desired retirement, but you'll always live in our hearts.
And for sure -- monument!
+-------------------------------------------+
/ ++==+ . .. . ... . .. . /
/ // ++==++ ++ ++ ++==++ ++==++ /
/ // // // //\\//\\ // // // // /
/ ++==+ ++==++ // \\ //==++ ++==++ /
/ . ... .. . // .. ... /
+-------------------------------------------+
Some notes:
- Removed all code which was from inside ifdef WITH_COMPOSITOR_LEGACY
- Removed some functions which were used by old compositor only but
weren't ported to new color management
- Removed WITH_COMPOSITOR_LEGACY from build systems
- node_composite_util.h was in fatc used by compo nodes specification
files, so added it back to cmake.
Could be cleaned up by moving header files to files where they're
actually needed but would consider this is a separate task.
- Should be no functional changes!
|
|
It's intended to perform compilation of CUDA kernels only,
without doing anything with other sources/resources and
main purpose of this target is to be able to compile cuda
kernels in completely different environment than the rest
of blender was compiled.
This is needed for linux build environment, where sm_13
compilation fails dramatically in 32bit chroot but could
be compiled in 64bit environment.
|
|
* Don't put -release- string into the final .exe name.
blender-2.65-release-windows32.exe --> blender-2.65-windows32.exe
|
|
user visible config to make branch merging less of a hassle.
|
|
|
|
Initial support of OSL builds using SCons build system. Only tested on Linux now.
No changes to configuration files themselves -- for now check how it's configured
for linux buildbot (it was already horror to make all this changes and verify them,
changes to linux-config.py could easily be done later).
Currently WITH_BF_STATICOSL and WITH_BF_STATICLLVM are more like rudiments because
linking against oslexec requires special trick with --whole-archive. We woul either
need to find a way dealing with this oslexec less hackish or drop STATICOSL and
STATICLLVM flags. Will keep dropping this flags for until we have "final" build
rules for OSL.
Still can not make 32bit linux rendering with OSL -- blender simply crashes when
starting rendering. So for time being this issues are solving disabled OSL for
32bit build slaves.
|
|
|
|
Proper implementation for only including the boost locale libs when
WITH_BF_INTERNATIONAL is enabled, so that those of us who do not need/want to
bother with translated ui's can compile. The way it was done before was wrong as
1) the value was always set to true earlier in the config scripts, 2) the base
config scripts run before user config overrides are set
|
|
ones, nor to iconv, as it’s still uncleare whether we can get rid of it :/
|
|
|
|
Jack, jpeg, png, openmp, opencollada libraris now could be forced to be static
|
|
remove CTR c++ classes that are no longer used.
|
|
|
|
This commit integrates support of OpenColorIO library into build systems.
It also contains C-API for OpenColorIO library which could be used by Blender.
CMake has got find rules familiar to OpenImageIO's one which makes it easier
for build system to find needed libraries and includes. Scons only could use
explicitly defined paths to libraries and includes.
C-API would be compiled and Blender would be linked against C-API and OpenColorIO
but it wouldn't affect on Blender behavior at all.
OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and
setting WITH_BF_OCIO in Scons.
|
|
* Added WITH_BF_COMPOSITOR_LEGACY, enabled per default.
|
|
|
|
Carve proved it's a way to go, so the time have came to get rid of old
boolean operation module which isn't used anymore.
Still kept BOP interface but move it to BSP module. At some point it
could be cleaned up further (like perhaps removed extra abstraction
level or so) but would be nice to combine such a refactor with making
BSP aware of NGons.
Tested on linux using both cmake and scons, possible regressions on
windows/osx. Would check windoes build just after commit.
|
|
Assumes numpy is installed to the BF_PYTHON/site-packages/numpy directory,
could be tweaked further, but this should be enough to setup release
building environment.
Seems blender can't import numpy, but that doesn't seem to be scons issue,
the same happens here with cmake too. Would ask Campbell to help looking
into this.
|
|
* WITH_BF_COMPOSITOR option, to disable tile compositor compilation.
* Removed unused SCons file.
|
|
compile
|
|
python scons/scons.py BF_CYCLES_CUDA_BINARIES_ARCH=sm_20,sm21
|
|
|
|
|
|
(Dobz) thanks a lot!
|
|
slight modifications.
Thanks!
|
|
* Made Frameserver building optional, added WITH_BF_FRAMESERVER.
* Enabled per default in btools.py
|
|
* Made Smoke building optional, added WITH_BF_SMOKE.
* Enabled per default in btools.py
|
|
* Some code and comment cleanup
* Remove cmake equivalent variable comments
* Remove some non used parameters from config files and btools: WITH_BF_FMOD, BF_VERSION.
* Remove some commented non-used variables
|
|
WITH_GHOST_XDND=False with SCons
Disabled on FreeBSD platforms due to some linking errors.
|
|
|
|
Error was caused by boost library (which doesn't seem to be working with Cycles too
when compiling with mingw). Switched mingw to use TR1 unordered collections. Also,
there was re-declaration of strcasecmp when mingw is used.
Additional changes are related on using own process spawning when BF_TOOLSET is set to
mingw. Seems to be working fine now (i've got too long command line error) and no
warning are supressing now (as it was told in comment for commented own process spawning).
|
|
==================================
Merging Carve library integration project into the trunk.
This commit switches Boolean modifier to another library which handles
mesh boolean operations in much stable and faster way, resolving old
well-known limitations of intern boolop library.
Carve is integrating as alternative interface for boolop library and
which makes it totally transparent for blender sources to switch between
old-fashioned boolop and new Carve backends.
Detailed changes in this commit:
- Integrated needed subset of Carve library sources into extern/
Added script for re-bundling it (currently works only if repo
was cloned by git-svn).
- Added BOP_CarveInterface for boolop library which can be used by
Boolean modifier.
- Carve backend is enabled by default, can be disabled by WITH_BF_CARVE
SCons option and WITH_CARVE CMake option.
- If Boost library is found in build environment it'll be used for
unordered collections. If Boost isn't found, it'll fallback to TR1
implementation for GCC compilers. Boost is obligatory if MSVC is used.
Tested on Linux 64bit and Windows 7 64bit.
NOTE: behavior of flat objects was changed. E.g. Plane-Sphere now gives
plane with circle hole, not plane with semisphere. Don't think
it's really issue because it's not actually defined behavior in
such situations and both of ways might be useful. Since it's
only known "regression" think it's OK to deal with it.
Details are there http://wiki.blender.org/index.php/User:Nazg-gul/CarveBooleans
Special thanks to:
- Ken Hughes: author of original carve integration patch.
- Campbell Barton: help in project development, review tests.
- Tobias Sargeant: author of Carve library, help in resolving some
merge stoppers, bug fixing.
|
|
|
|
|
|
|
|
* Added option "WITH_BF_CYCLES_CUDA_THREADED_COMPILE" for the people who have much RAM (8 or more) and can compile several kernels at the same time. If enabled, it uses the general BF_NUMJOBS flag.
* The option is off per default.
|
|
* Compile all of cycles with -ffast-math again
* Add scons compilation of cuda binaries, tested on mac/linux.
* Add UI option for supported/experimental features, to make it
more clear what is supported, opencl/subdivision is experimental.
* Remove cycles xml exporter, was just for testing.
|
|
* Add dummy WITH_BF_CYCLES_BINARIES to scons, to be able to copy the .cubin kernels from cmake and have it work.
|
|
|
|
by Matt Ebb, Hamed Zaghaghi
This adds a new Modifier "Ocean" to simulate large-scale wave motion.
Details can be found in the wiki documentation [1], the project homepage [2] and the patch tracker [3]
The modifier is disabled by default for now. To enable it, the WITH_OCEANSIM (cmake) / WITH_BF_OCEANSIM (scons) flags have to be set. The code depends on fftw3, so this also has to be enabled.
[1]
http://wiki.blender.org/index.php/Doc:2.6/Manual/Modifiers/Simulation/Ocean
[2]
http://www.savetheoceansim.com
[3]
http://projects.blender.org/tracker/?group_id=9&atid=127&func=detail&aid=28338
|
