| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Differential Revision: https://developer.blender.org/D3700
|
|
Maybe it's still early to set the new drawing api for python.
But joining these two modules is an initial step.
```
>>> gpu.
matrix
select
types
```
```
>>> gpu.types.GPU
Batch(
OffScreen(
VertBuf(
VertFormat(
```
The creation of a new offscreen object is now done by the `GPUOffscreen.__new__` method.
Reviewers: campbellbarton, dfelinto
Reviewed By: campbellbarton, dfelinto
Tags: #bf_blender_2.8
Differential Revision: https://developer.blender.org/D3667
|
|
Conflicts:
source/blender/blenkernel/intern/collision.c
|
|
Differential Revision: https://developer.blender.org/D3668
|
|
Brecht authored this commit, but he gave me the honours to actually
do it. Here it goes; Blender Internal. Bye bye, you did great!
* Point density, voxel data, ocean, environment map textures were removed,
as these only worked within BI rendering. Note that the ocean modifier
and the Cycles point density shader node continue to work.
* Dynamic paint using material shading was removed, as this only worked
with BI. If we ever wanted to support this again probably it should go
through the baking API.
* GPU shader export through the Python API was removed. This only worked
for the old BI GLSL shaders, which no longer exists. Doing something
similar for Eevee would be significantly more complicated because it
uses a lot of multiplass rendering and logic outside the shader, it's
probably impractical.
* Collada material import / export code is mostly gone, as it only worked
for BI materials. We need to add Cycles / Eevee material support at some
point.
* The mesh noise operator was removed since it only worked with BI
material texture slots. A displacement modifier can be used instead.
* The delete texture paint slot operator was removed since it only worked
for BI material texture slots. Could be added back with node support.
* Not all legacy viewport features are supported in the new viewport, but
their code was removed. If we need to bring anything back we can look at
older git revisions.
* There is some legacy viewport code that I could not remove yet, and some
that I probably missed.
* Shader node execution code was left mostly intact, even though it is not
used anywhere now. We may eventually use this to replace the texture
nodes with Cycles / Eevee shader nodes.
* The Cycles Bake panel now includes settings for baking multires normal
and displacement maps. The underlying code needs to be merged properly,
and we plan to add back support for multires AO baking and add support
to Cycles baking for features like vertex color, displacement, and other
missing baking features.
* This commit removes DNA and the Python API for BI material, lamp, world
and scene settings. This breaks a lot of addons.
* There is more DNA that can be removed or renamed, where Cycles or Eevee
are reusing some old BI properties but the names are not really correct
anymore.
* Texture slots for materials, lamps and world were removed. They remain
for brushes, particles and freestyle linestyles.
* 'BLENDER_RENDER' remains in the COMPAT_ENGINES of UI panels. Cycles and
other renderers use this to find all panels to show, minus a few panels
that they have their own replacement for.
|
|
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
|
|
|
|
Takes information from the manual and dumps it here.
|
|
https://docs.blender.org/manual/en/dev/game_engine/python_api/videotexture.html
Had a few things that this file did not while this file having things the other did not.
To fix, I merged both documents into the python api.
|
|
This will be used to link to from the manual.
|
|
|
|
|
|
|
|
|
|
This page now lives at https://docs.blender.org/manual/en/dev/advanced/scripting/addon_tutorial.html
|
|
|
|
|
|
|
|
|
|
Reword to clean up some odd grammar (mostly dangling modifiers) and
improve readability.
Differential Revision: https://developer.blender.org/D2699
|
|
|
|
|
|
|
|
Mostly from patch D2256 by Aaron Carlisle (@Blendify), thanks!
|
|
Self-explanatory. to find broken links run `sphinx-build -b linkcheck sphinx-in sphinx-out`
Reviewers: mont29
Tags: #bf_blender, #python, #infrastructure:_websites
Differential Revision: https://developer.blender.org/D2297
|
|
This works by downloading the objects.inv file (https://www.blender.org/manual/objects.inv)
and using it to resolve links with blender-manual: before them.
|
|
Differential Revision: https://developer.blender.org/D2293
|
|
first parameter is mandatory and must be a bool indicating if the image
source should be refreshed after updating the texture.
|
|
This was originally supported, however relative links to examples & templates made it fail.
Now files in the source tree are copied to the build-dir, with ".." replaced with "__"
to avoid having to mirror Blender's source-layout in the Sphinx build-dir.
Also skip uploading the built docs when an SSH user-name isn't passed to sphinx_doc_gen.sh
instead of aborting (so people w/o SSH access to our servers can use the shell-script).
|
|
|
|
You can capture and stream video in the BGE using the DeckLink video
cards from Black Magic Design. You need a card and Desktop Video software
version 10.4 or above to use these features in the BGE.
Many thanks to Nuno Estanquiero who tested the patch extensively
on a variety of Decklink products, it wouldn't have been possible without
his help.
You can find a brief summary of the decklink features here: https://wiki.blender.org/index.php/Dev:Source/GameEngine/Decklink
The full API details and samples are in the Python API documentation.
bge.texture.VideoDeckLink(format, capture=0):
Use this object to capture a video stream. the format argument describes
the video and pixel formats and the capture argument the card number.
This object can be used as a source for bge.texture.Texture so that the frame
is sent to the GPU, or by itself using the new refresh method to get the video
frame in a buffer.
The frames are usually not in RGB but in YUV format (8bit or 10bit); they
require a shader to extract the RGB components in the GPU. Details and sample
shaders in the documentation.
3D video capture is supported: the frames are double height with left and right
eyes in top-bottom order. The 'eye' uniform (see setUniformEyef) can be used to
sample the 3D frame when the BGE is also in stereo mode. This allows to composite
a 3D video stream with a 3D scene and render it in stereo.
In Windows, and if you have a nVidia Quadro GPU, you can benefit of an additional
performance boost by using 'GPUDirect': a method to send a video frame to the GPU
without going through the OGL driver. The 'pinned memory' OGL extension is also
supported (only on high-end AMD GPU) with the same effect.
bge.texture.DeckLink(cardIdx=0, format=""):
Use this object to send video frame to a DeckLink card. Only the immediate mode
is supported, the scheduled mode is not implemented.
This object is similar to bge.texture.Texture: you need to attach a image source
and call refresh() to compute and send the frame to the card.
This object is best suited for video keying: a video stream (not captured) flows
through the card and the frame you send to the card are displayed above it (the
card does the compositing automatically based on the alpha channel).
At the time of this commit, 3D video keying is supported in the BGE but not in the
DeckLink card due to a color space issue.
|
|
defines a uniform that reflects the eye being rendered in stereo mode:
0.0 for the left eye, 0.5 for the right eye.
In non stereo mode, the value of the uniform is fixed to 0.0.
The typical use of this uniform is in stereo mode to sample stereo textures
containing the left and right eye images in a top-bottom order.
python:
shader = obj.meshes[0].materials[mat].getShader()
shader.setUniformEyef("eye")
shader:
uniform float eye;
uniform sampler2D tex;
void main(void)
{
vec4 color;
float ty, tx;
tx = gl_TexCoord[0].x;
ty = eye+gl_TexCoord[0].y*0.5;
// ty will be between 0 and 0.5 for the left eye render
// and 0.5 and 1.0 for the right eye render.
color = texture(tex, vec2(tx, ty));
...
}
|
|
bge.logic.setRender(flag) to enable/disable render.
The render pass is enabled by default but it can be disabled with
bge.logic.setRender(False).
Once disabled, the render pass is skipped and a new logic frame starts
immediately. Note that VSync no longer limits the fps when render is off
but the 'Use Frame Rate' option in the Render Properties still does.
To run as many frames as possible, untick the option
This function is useful when you don't need the default render, e.g.
when doing offscreen render to an alternate device than the monitor.
Note that without VSync, you must limit the frame rate by other means.
fbo = bge.render.offScreenCreate(width,height,[,samples=0][,target=bge.render.RAS_OFS_RENDER_BUFFER])
Use this method to create an offscreen buffer of given size, with given MSAA
samples and targetting either a render buffer (bge.render.RAS_OFS_RENDER_BUFFER)
or a texture (bge.render.RAS_OFS_RENDER_TEXTURE). Use the former if you want to
retrieve the frame buffer on the host and the latter if you want to pass the render
to another context (texture are proper OGL object, render buffers aren't)
The object created by this function can only be used as a parameter of the
bge.texture.ImageRender() constructor to send the the render to the FBO rather
than to the frame buffer. This is best suited when you want to create a render
of specific size, or if you need an image with an alpha channel.
bge.texture.<imagetype>.refresh(buffer=None, format="RGBA", ts=-1.0)
Without arg, the refresh method of the image objects is pretty much a no-op, it
simply invalidates the image so that on next texture refresh, the image will
be recalculated.
It is now possible to pass an optional buffer object to transfer the image (and
recalculate it if it was invalid) to an external object. The object must implement
the 'buffer protocol'. The image will be transfered as "RGBA" or "BGRA" pixels
depending on format argument (only those 2 formats are supported) and ts is an
optional timestamp in the image depends on it (e.g. VideoFFmpeg playing a video file).
With this function you don't need anymore to link the image object to a Texture
object to use: the image object is self-sufficient.
bge.texture.ImageRender(scene, camera, fbo=None)
Render to buffer is possible by passing a FBO object (see offScreenCreate).
bge.texture.ImageRender.render()
Allows asynchronous render: call this method to render the scene but without
extracting the pixels yet. The function returns as soon as the render commands
have been send to the GPU. The render will proceed asynchronously in the GPU
while the host can perform other tasks.
To complete the render, you can either call refresh() directly of refresh the texture
to which this object is the source. Asynchronous render is useful to achieve optimal
performance: call render() on frame N and refresh() on frame N+1 to give as much as
time as possible to the GPU to render the frame while the game engine can perform other tasks.
Support negative scale on camera.
Camera scale was previously ignored in the BGE.
It is now injected in the modelview matrix as a vertical or horizontal flip
of the scene (respectively if scaleY<0 and scaleX<0).
Note that the actual value of the scale is not used, only the sign.
This allows to flip the image produced by ImageRender() without any performance
degradation: the flip is integrated in the render itself.
Optimized image transfer from ImageRender to buffer.
Previously, images that were transferred to the host were always going through
buffers in VideoTexture. It is now possible to transfer ImageRender
images to external buffer without intermediate copy (i.e. directly from OGL to buffer)
if the attributes of the ImageRender objects are set as follow:
flip=False, alpha=True, scale=False, depth=False, zbuff=False.
(if you need to flip the image, use camera negative scale)
|
|
Replace "..attribute::" by ".. attribute::".
|
|
|
|
This patch adds a python method to get openGL bind code of material's texture according to the texture slot.
Example:
import bge
cont = bge.logic.getCurrentController()
own = cont.owner
bindId = own.meshes[0].materials[0].getTextureBindcode(0)
Test file: http://www.pasteall.org/blend/40679
This can be used to play with texture in openGL, for example, remove mipmap on the texture or play with all wrapping or filtering options.
And this can be used to learn openGL with Blender.
Reviewers: TwisterGE, kupoman, moguri, panzergame
Reviewed By: TwisterGE, kupoman, moguri, panzergame
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1804
|
|
|
|
|
|
|
|
|
|
|
|
This patch adds a new API which allow us to access light shadow settings from python. The new API can be used to write custom GLSL materials with shadows.
Reviewers: brecht, kupoman, agoose77, panzergame, campbellbarton, moguri, hg1
Reviewed By: agoose77, panzergame, campbellbarton, moguri, hg1
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1690
|
|
This patch improves clock management in BGE, to be able to accelerate /
slow the time, and also to finely synchronize clock with external
engines. Several new python functions have been added and existence ones
have been improved for that purpose. Now we have:
- getClockTime(): Get the current BGE render time, in seconds. The BGE
render time is the simulation time corresponding to the next scene that
will be rendered.
- getFrameTime(): Get the current BGE frame time, in seconds. The BGE
frame time is the simulation time corresponding to the current call of
the logic system. Generally speaking, it is what the user is interested
in.
- getRealTime(): Get the number of real (system-clock) seconds elapsed
since the beginning of the simulation.
- getTimeScale(): Get the time multiplier between real-time and
simulation time. The default value is 1.0. A value greater than 1.0
means that the simulation is going faster than real-time, a value lower
than 1.0 means that the simulation is going slower than real-time.
- setTimeScale(time_scale): Set the time multiplier between real-time
and simulation time. A value greater than 1.0 means that the simulation
is going faster than real-time, a value lower than 1.0 means that the
simulation is going slower than real-time. Note that a too large value
may lead to some physics instabilities.
- getUseExternalClock(): Get if the BGE use the inner BGE clock, or rely
or on an external clock. The default is to use the inner BGE clock.
- setUseExternalClock(use_external_clock): Set if the BGE use the inner
BGE clock, or rely or on an external clock. If the user selects the use
of an external clock, he should call regularly the setClockTime method.
- setClockTime(new_time): Set the next value of the simulation clock. It
is preferable to use this method from a custom main function in python,
as calling it in the logic block can easily lead to a blocked system (if
the time does not advance enough to run at least the next logic step).
Rationale are described more precisely in the thread
http://lists.blender.org/pipermail/bf-gamedev/2013-November/000165.html.
See also T37640
Reviewers: sybren, panzergame, #game_engine, lordloki, moguri
Reviewed By: sybren, panzergame, #game_engine, lordloki, moguri
Subscribers: moguri, hg1, sybren, panzergame, dfelinto, lordloki
Projects: #game_engine
Maniphest Tasks: T37640
Differential Revision: https://developer.blender.org/D728
|
|
|
|
KX_IPOActuator is not used since 2.4.
This patch removes:
- KX_IPOActuator.h/cpp;
- Python doc;
- Write of IPO actuator in write.c;
- Allocation of IPOactuator in sca.c;
- Conversion in KX_ConvertActuators.cpp;
- Initialization of the python proxy in KX_PythonInitTypes.cpp;
- Other minor remove in logic_windows.c and in KX_PythonInit.cpp.
Reviewers: sybren, campbellbarton
Reviewed By: campbellbarton
Subscribers: moguri
Differential Revision: https://developer.blender.org/D1603
|
|
This patch fixes:
- the call of LibFree on a unfinished loaded library;
- memory leak created on end of game : the async libraries are loaded but not converted, so not freed with the master scene.
Reviewers: campbellbarton, sybren, youle, hg1, moguri, lordloki
Reviewed By: moguri, lordloki
Differential Revision: https://developer.blender.org/D1571
|
|
D1378 by @youle
Non-uniform scaled lamps now cast oval/rectangular shadows, viewport & BGE.
|
|
Change the mathutils callback from vector to color for mistColor, backgroundColor and ambientColor.
Reviewers: lordloki, campbellbarton, panzergame, moguri, sybren
Reviewed By: panzergame, moguri, sybren
Projects: #game_engine, #game_logic
Differential Revision: https://developer.blender.org/D1432
|
|
* Change the character jumping variables and methods from int to char.
* Limit the maxJumps integer value from 0 to 255.
* Allow to set the minimum jump amount to 0.
Reviewers: panzergame, lordloki, moguri
Reviewed By: lordloki, moguri
Subscribers: agoose77
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1305
|
