| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Make logic consistent with the render pass creation in Python.
|
|
|
|
By default it will now set the step size to the voxel size for smoke and
volume objects, and 1/10th the bounding box for procedural volume shaders.
New settings are:
* Scene render/preview step rate: to globally adjust detail and performance
* Material step rate: multiplied with auto detected per-object step size
* World step size: distance to steo for world shader
Differential Revision: https://developer.blender.org/D1777
|
|
Voxels are loaded directly from the OpenVDB grid. Rendering still only supports
dense grid, so memory usage is not great for sparse volumes, this is to be
addressed in the future.
Ref T73201
|
|
|
|
This feature takes some inspiration from
"RenderMan: An Advanced Path Tracing Architecture for Movie Rendering" and
"A Hierarchical Automatic Stopping Condition for Monte Carlo Global Illumination"
The basic principle is as follows:
While samples are being added to a pixel, the adaptive sampler writes half
of the samples to a separate buffer. This gives it two separate estimates
of the same pixel, and by comparing their difference it estimates convergence.
Once convergence drops below a given threshold, the pixel is considered done.
When a pixel has not converged yet and needs more samples than the minimum,
its immediate neighbors are also set to take more samples. This is done in order
to more reliably detect sharp features such as caustics. A 3x3 box filter that
is run periodically over the tile buffer is used for that purpose.
After a tile has finished rendering, the values of all passes are scaled as if
they were rendered with the full number of samples. This way, any code operating
on these buffers, for example the denoiser, does not need to be changed for
per-pixel sample counts.
Reviewed By: brecht, #cycles
Differential Revision: https://developer.blender.org/D4686
|
|
This patch adds a new user-configurable option to change at which sample viewport
denoising should kick in. Setting it to zero retains previous behavior (start immediately), while
other values will defer denoising until the particular sample has been reached. Default is now
at one, to avoid the weirdness that is AI denoising at small resolutions.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6906
|
|
This simplifies compositors setups and will be consistent with Eevee render
passes from D6331. There's a continuum between these passes and it's not clear
there is much advantage to having them available separately.
Differential Revision: https://developer.blender.org/D6848
|
|
The OptiX denoiser can be a great help when rendering in the viewport, since it is really fast
and needs few samples to produce convincing results. This patch therefore adds support for
using any Cycles denoiser in the viewport also (but only the OptiX one is selectable because
the NLM one is too slow to be usable currently). It also adds support for denoising on a
different device than rendering (so one can e.g. render with the CPU but denoise with OptiX).
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D6554
|
|
|
|
|
|
This patch adds support for the OptiX denoiser as an alternative to the existing NLM denoiser in Cycles. It's re-using the same denoising architecture based on tiles and therefore implicitly also works with multiple GPUs.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D6395
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
Custom render passes are added in the Shader AOVs panel in the view layer
settings, with a name and data type. In shader nodes, an AOV Output node
is then used to output either a value or color to the pass.
Arbitrary names can be used for these passes, as long as they don't conflict
with built-in passes that are enabled. The AOV Output node can be used in both
material and world shader nodes.
Implemented by Lukas, with tweaks by Brecht.
Differential Revision: https://developer.blender.org/D4837
|
|
Small memory reduction change by only storing the pixels of the combined
pass when it is being shown in the viewport. Previously the combined pass
was always calculated and present in the output buffer. The combined pass
will still be calculated.
It is a limitation in Blender that Cycles always had a combined pass.
This patch will remove the limitation from the code base of Cycles.
Blender still has the limitation, but will always request the combined
renderpass when doing final rendering.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5784
|
|
This uses hardware-accelerated raytracing on NVIDIA RTX graphics cards.
It is still currently experimental. Most features are supported, but a few
are still missing like baking, branched path tracing and using CPU memory.
https://wiki.blender.org/wiki/Reference/Release_Notes/2.81/Cycles#NVIDIA_RTX
For building with Optix support, the Optix SDK must be installed. See here for
build instructions:
https://wiki.blender.org/wiki/Building_Blender/CUDA
Differential Revision: https://developer.blender.org/D5363
|
|
This change allows the user to select a renderpass in the 3d viewport.
Added support for external renderers to extend the `View3DShading` struct.
This way Blender doesn't need to know the features an external render engine wants to support.
Note that the View3DShading is also available in the scene->display.shading; although this is
supported, it does not make sense for render engines to put something here as it is really
scene/workbench related.
Currently cycles assumes that it always needs to calculate the combined pass; it ignores the
`pass_flag` in KernelFilm. We could optimize this but that was not in scope of this change
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5689
|
|
This change implements the basics as described in {T68312} for the
shading modes.
* LookDev shading mode is renamed to Material Preview. It always uses Eevee as renderer, and is intended to provide a fast material preview suitable for texture painting, and texture and material setup.
* Rendered shading gains "Use Scene Lights" and "Use Scene World" options similar to current Material Preview. These will be enabled by default. When Use Scene World is turned off, HDRIs will be used for lighting instead. These options are available for EEVEE and Cycles.
* Renderers will be able to customize the shading settings panel and add additional settings.
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5612
|
|
The White Noise node hashes the input and returns a random number in the
range [0, 1]. The input can be a 1D, 2D, 3D, or a 4D vector.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5550
|
|
It's found in the Sampling > Advanced panel and 0 by default. This helps to
reduce noise in some scenes, while making others slower.
|
|
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
The camera world to raster computation was using wrong values. Also fixes
update when changing subdivision scene settings.
|
|
|
|
|
|
It's effectively always enabled, only not on some unsupported OpenCL devices.
For testing those it's not useful to disable these features. This is replaced
by the more fine grained feature toggles that we have now.
|
|
|
|
Can't use INT_MAX, CMJ runs into precision/overflow issues before that.
|
|
|
|
|
|
|
|
Prefiltering of feature passes will happen during rendering, which can
then be used for denoising immediately or written as a render pass for
later (animation) denoising.
The number of denoising data passes written is reduced because of this,
leaving out the feature variance passes. The passes are now Normal,
Albedo, Depth, Shadowing, Variance and Intensity.
Ref D3889.
|
|
|
|
We've had many reported crashes on Windows where we suspect there is a
corrupted OpenCL driver. The purpose here is to keep Blender generally
usable in such cases.
Now it always shows None / CUDA / OpenCL in the preferences, and only when
selecting one will it reveal if there are any GPUs available. This should
avoid crashes when opening the preferences or on startup.
Differential Revision: https://developer.blender.org/D4265
|
|
Since there will be no view layer overrides in 2.80, this is needed still.
|
|
|
|
Partially reverts 45fdf41be87f & 6d38d824377c,
added comment why term 'updated' is used in this case.
|
|
|
|
|
|
|
|
various parts of the CPU kernel
This commit adds a sample-based profiler that runs during CPU rendering and collects statistics on time spent in different parts of the kernel (ray intersection, shader evaluation etc.) as well as time spent per material and object.
The results are currently not exposed in the user interface or per Python yet, to see the stats on the console pass the "--cycles-print-stats" argument to Cycles (e.g. "./blender -- --cycles-print-stats").
Unfortunately, there is no clear way to extend this functionality to CUDA or OpenCL, so it is CPU-only for now.
Reviewers: brecht, sergey, swerner
Reviewed By: brecht, swerner
Differential Revision: https://developer.blender.org/D3892
|
|
|
|
|
|
Note that this is turned off by default and must be enabled at build time with the CMake WITH_CYCLES_EMBREE flag.
Embree must be built as a static library with ray masking turned on, the `make deps` scripts have been updated accordingly.
There, Embree is off by default too and must be enabled with the WITH_EMBREE flag.
Using Embree allows for much faster rendering of deformation motion blur while reducing the memory footprint.
TODO: GPU implementation, deduplication of data, leveraging more of Embrees features (e.g. tessellation cache).
Differential Revision: https://developer.blender.org/D3682
|
|
|
|
Needed for the animation denoiser since the denoising filter is done separately there.
Reviewers: brecht, sergey
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D3833
|
|
|
|
This allows for extra output passes that encode automatic object and material masks
for the entire scene. It is an implementation of the Cryptomatte standard as
introduced by Psyop. A good future extension would be to add a manifest to the
export and to do plenty of testing to ensure that it is fully compatible with other
renderers and compositing programs that use Cryptomatte.
Internally, it adds the ability for Cycles to have several passes of the same type
that are distinguished by their name.
Differential Revision: https://developer.blender.org/D3538
|
