Age | Commit message (Collapse) | Author |
|
|
|
|
|
Ref T68981
|
|
|
|
This feature takes some inspiration from
"RenderMan: An Advanced Path Tracing Architecture for Movie Rendering" and
"A Hierarchical Automatic Stopping Condition for Monte Carlo Global Illumination"
The basic principle is as follows:
While samples are being added to a pixel, the adaptive sampler writes half
of the samples to a separate buffer. This gives it two separate estimates
of the same pixel, and by comparing their difference it estimates convergence.
Once convergence drops below a given threshold, the pixel is considered done.
When a pixel has not converged yet and needs more samples than the minimum,
its immediate neighbors are also set to take more samples. This is done in order
to more reliably detect sharp features such as caustics. A 3x3 box filter that
is run periodically over the tile buffer is used for that purpose.
After a tile has finished rendering, the values of all passes are scaled as if
they were rendered with the full number of samples. This way, any code operating
on these buffers, for example the denoiser, does not need to be changed for
per-pixel sample counts.
Reviewed By: brecht, #cycles
Differential Revision: https://developer.blender.org/D4686
|
|
|
|
The OptiX denoiser can be a great help when rendering in the viewport, since it is really fast
and needs few samples to produce convincing results. This patch therefore adds support for
using any Cycles denoiser in the viewport also (but only the OptiX one is selectable because
the NLM one is too slow to be usable currently). It also adds support for denoising on a
different device than rendering (so one can e.g. render with the CPU but denoise with OptiX).
Reviewed By: #cycles, brecht
Differential Revision: https://developer.blender.org/D6554
|
|
|
|
|
|
|
|
This change allows the user to select a renderpass in the 3d viewport.
Added support for external renderers to extend the `View3DShading` struct.
This way Blender doesn't need to know the features an external render engine wants to support.
Note that the View3DShading is also available in the scene->display.shading; although this is
supported, it does not make sense for render engines to put something here as it is really
scene/workbench related.
Currently cycles assumes that it always needs to calculate the combined pass; it ignores the
`pass_flag` in KernelFilm. We could optimize this but that was not in scope of this change
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5689
|
|
This change implements the basics as described in {T68312} for the
shading modes.
* LookDev shading mode is renamed to Material Preview. It always uses Eevee as renderer, and is intended to provide a fast material preview suitable for texture painting, and texture and material setup.
* Rendered shading gains "Use Scene Lights" and "Use Scene World" options similar to current Material Preview. These will be enabled by default. When Use Scene World is turned off, HDRIs will be used for lighting instead. These options are available for EEVEE and Cycles.
* Renderers will be able to customize the shading settings panel and add additional settings.
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5612
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
Since there will be no view layer overrides in 2.80, this is needed still.
|
|
Object visibility is now handled by the depsgraph iterator, but this API
was incomplete as it made no distinction for visibility of the object itself,
particles and generated instances.
The depsgraph iterator API now includes information about which part of the
object is visible, and this is used by Cycles to replace the old custom logic.
Cycles and EEVEE visibility should now be consistent, which unfortunately does
means some subtle compatibility breakage for both.
Fixes T58956, T58202, T59284.
Differential Revision: https://developer.blender.org/D4109
|
|
|
|
|
|
It is supposed to be two spaces before comment stating which if
else/endif statements corresponds to. Was mainly violated in the
header guards.
|
|
|
|
This allows for extra output passes that encode automatic object and material masks
for the entire scene. It is an implementation of the Cryptomatte standard as
introduced by Psyop. A good future extension would be to add a manifest to the
export and to do plenty of testing to ensure that it is fully compatible with other
renderers and compositing programs that use Cryptomatte.
Internally, it adds the ability for Cycles to have several passes of the same type
that are distinguished by their name.
Differential Revision: https://developer.blender.org/D3538
|
|
In the outliner, right click > view layer > set holdout. This is
temporary until we have more general dynamic overrides, but helps
Spring production for now.
|
|
|
|
Was only visible when doing command line, since it was happening due to
cache-free policy which was aimed to bring memory usage down.
The issue is that if object with particle system is used as a nested
duplicator multiple times, it will only generate children first time,
and after that its caches are freed. After that duplication system
can not generate any instances, since the path cache is lost.
Now we delay caches free to after all objects are synchronized, which
ensures all instances are generated.
This will increase a memory peak a bit during object synchronization
time, but overall it shouldn't be that bad, since memory footprint
after synchronization will stay the same as before this change.
The ultimate thing to do here would be to drop the whole dependency
graph away, but this will require:
- API on engine side, to inform it to drop the dependency graph.
- Changes in Cycles report system to NOT use evaluated scene to get
scene name (evaluated scene will be gone with dependency graph).
|
|
Internally it's still mostly named lamps, though some modules like Cycles
were already calling them lights.
|
|
|
|
|
|
* depsgraph.ids: all evaluated datablocks in the depsgraph
* depsgraph.objects: all evaluated objects in the depsgraph
* depsgraph.object_instances: all object instances to display or render
* depsgraph.updates: list of updates to datablocks
|
|
This introduces a new depsgraph API for getting updated datablocks,
rather than getting it from bpy.data.
* depsgraph.ids_updated gives a list of all datablocks in the depsgraph
which have been updated.
* depsgraph.id_type_updated('TYPE') is true if any datablock of the given
type has been added, removed or modified.
More API updates are coming to properly handle multiple depsgraphs and
finer update granularity, but this should make Cycles work again.
|
|
For correct results these must have been set already when the depsgraph was
created and evaluated, so all dependencies have appropriate resolutions too.
For particle we no longer backup and restore the viewport particles to avoid
overwriting them during render, as copy-on-write solves this for us. Even
without COW particles seem to work ok.
This also removes the particle simplification options based on camera. This
was never used much and only available in Blender Internal.
Differential Revision: https://developer.blender.org/D3148
|
|
|
|
|
|
|
|
This still does not make point density to work in Cycles, but at least it pass
the depsgraph down the line.
Note this was working fine before the depsgraph/render refactor to pass
evaluated depsgraph to the engines.
|
|
Point density texture and motion blur are still broken, and many more changes
are needed in general to used evaluated datablocks.
|
|
User notes
----------
Compositing, rendering of multi-layers in Eevee should be fully working now.
Development notes
-----------------
Up until now we were still using the same depsgraph for rendering and viewport
evaluation. And we had to go out of our ways to be sure the depsgraphs were
updated.
Now we iterate over the (to be rendered) view layers and create a depsgraph to
each one, fully evaluated and call the render engines (Cycles, Eevee, ...) with
this viewlayer/depsgraph/evaluation context.
At this time we are not handling data persistency, Depsgraph is created from
scratch prior to rendering each frame. So I got rid of most of the partial
update calls we had during the render pipeline.
Cycles: Brecht Van Lommel did a patch to tackle some of the required Cycles
changes but this commit mark these changes as TODOs. Basically Cycles needs to
render one layer at a time.
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3073
|
|
|
|
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
|
|
This patch moves all the functionality previously in SceneRenderLayer to SceneLayer.
If we want to rename some of these structs now would be a good time to do it, before they are in SceneLayer.
Everything should be working, though I will test things further tomorrow. Once this is committed depsgraph can get
rid of the workaround added in rna_Main_meshes_new_from_object and finish whatever this patch was preventing from being finished.
This patch also adds a few placeholders for the overrides (samples, ...). These are obviously not working, so some unittests that rely on 'lay', and 'zmask' will fail.
This patch does not addressed the change of moving samples to ViewRender (I have this as a separate patch and needs some separate discussion).
Following next is the individual note of the individual parts that were committed.
Note 1: It is up to Cycles to still get rid of exclude_layer internally.
Note 2: Cycles still need to handle its own doversion for the use_layer_samples cases and
(1) Remove the override as it is
(2) Add a new override (scene.cycles.samples) if scene.cycles.use_layer_samples != IGNORE
Respecting the expected behaviour when scene.cycles.use_layer_samples == BOUNDED.
Note 3: Cycles still need to implement the per-object holdout
(similar to how we do shadow catcher).
Note 4: There are parts of the old (Blender Internal) rendering pipeline that is still
using lay, e.g., in shi->lay.
Honestly it will be easier to purge the entire Blender Internal code away instead of taking things from it bit by bit.
Reviewers: sergey, campbellbarton, brecht
Differential Revision: https://developer.blender.org/D2919
|
|
There are parts of the old (Blender Internal) rendering pipeline that is still
using lay, e.g., in shi->lay.
Honestly it will be easier to purge the entire Blender Internal code away instead
of taking things from it bit by bit.
|
|
Note: Cycles still need to implement the per-object holdout
(similar to how we do shadow catcher).
|
|
Note: Cycles still need to handle its own doversion for theses cases and
(1) Remove the override as it is
(2) Add a new override (scene.cycles.samples) if scene.cycles.use_layer_samples != IGNORE
Respecting the expected behaviour when scene.cycles.use_layer_samples == BOUNDED.
|
|
|
|
Note: It is up to Cycles to still get rid of exclude_layer internally:
RenderLayerInfo.exclude_layer
|
|
Considerable non-trivial merge conflict fixes.
|
|
|
|
|
|
|
|
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
|
|
|