| Age | Commit message (Collapse) | Author |
|---|
|
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
|
|
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
|
|
GCC seems to detect uninitialized into function calls now, but then isn't
always smart enough to see that it is actually initialized. Disabling this
warning entirely seems a bit too much, so initialize a bit more now.
|
|
|
|
The issue is coming from the fact that float3 is actually 16 bytes aligned
data type and the "padding" was not initialized. This caused memcmp() to
access non-initialized memory.
|
|
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
|
|
New logic of split_faces was leaving mesh in a proper state
from Blender's point of view, but Cycles wanted loop normals
to be "flushed" to vertex normals.
Now we do such a flush from Cycles side again, so we don't
leave bad meshes behind.
Thanks Bastien for assistance here!
|
|
The issue seems to be caused by vertex normal being re-calculated
to something else than loop normal, which also caused wrong loop
normals after re-calculation.
For now issue is solved by preserving CD_NORMAL for loops after
split_faces() is finished, so render engine can access original
proper value.
|
|
This is supposed to be a temporary layer.
If someone needs loop normals after split it should explicitly
ask for that.
|
|
it's better place for such an utility structure. Still not fully ideal tho.
|
|
autosplit
The issue was that we used to compare number of vertices for mesh after the auto
smooth was applied (at the center of the shutter time) with number of vertices
prior to the auto smooth applied. This caused false-positive consideration of a
mesh as changing topology.
Now we do autosplit as early as possible and do it from blender side, so Cycles
does not need to re-implement splitting on it's side.
|
|
This allows us to do some extra logic checks there based on particular
subdivision type.
Additionally avoids implicit cast of enum to bool.
|
|
|
|
When subdivision settings were moved from meshes to objects this was missed,
should work fine now.
|
|
|
|
Subdivision options can now be found in the subsurf modifier. The modifier must
be the last in the stack or the options will be unavailable. Catmull-Clark
subdivision is still unavailable and will fallback to linear subdivision instead
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2109
|
|
This adds support for ngons and attributes on subdivision meshes. Ngons are
needed for proper attribute interpolation as well as correct Catmull-Clark
subdivision. Several changes are made to achieve this:
- new primitive `SubdFace` added to `Mesh`
- 3 more textures are used to store info on patches from subd meshes
- Blender export uses loop interface instead of tessface for subd meshes
- `Attribute` class is updated with a simplified way to pass primitive counts
around and to support ngons.
- extra points for ngons are generated for O(1) attribute interpolation
- curves are temporally disabled on subd meshes to avoid various bugs with
implementation
- old unneeded code is removed from `subd/`
- various fixes and improvements
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2108
|
|
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2063
|
|
Differential Revision: https://developer.blender.org/D2016
|
|
At some point the idea was that we could have an optimization where we could
render multiple render layers without re-exporting the scene, by just updating
the layer bits. We are not doing this now and in practice with the available
render layer control like exclude layers it's not always possible anyway.
This makes it easier to support an arbitrary number of layers in the future
(hopefully this summer), and frees up some useful bits in the kernel.
Reviewed By: sergey, dingto
Differential Revision: https://developer.blender.org/D2020
|
|
|
|
Basically the idea is to make code robust against extending
enum options in the future by falling back to a known safe
default setting when RNA is set to something unknown.
While this approach solves the issues similar to T47377,
but it wouldn't really help when/if any of the RNA values
gets ever deprecated and removed. There'll be no simple
solution to that apart from defining explicit mapping from
RNA value to Cycles one.
Another part which isn't so great actually is that we now
have to have some enum guards and give some explicit values
to the enum items, but we can live with that perhaps.
Reviewers: dingto, juicyfruit, lukasstockner97, brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D1785
|
|
This way we avoid passing structures which could be up to
few hundred bytes by value to the utility functions.
Ideally we'll also have to add `const` qualifier in majority
of the calls, but C++ RNA does not allow us to do that because
it does not know if some function modifies contents or not.
|
|
enums.
|
|
Vector mapping node was doing some weird mapping of both original and mapped
coordinates. Mapping of original coordinates was caused by the clamping nature
of the LUT generated from the node. Mapping of the mapped value again was quite
totally obscure -- one needed to constantly keep in mind that actual value will
be scaled up and moved down.
This commit makes it so values in the vector curve mapping are always absolute.
In fact, it is now behaving quite the same as RGB curve mapping node and the
code could be de-duplicated. Keeping the code duplicated for a bit so it's more
clear what exact parts of the node changed.
Reviewers: brecht
Subscribers: bassamk
Differential Revision: https://developer.blender.org/D1672
|
|
Previously RGB Curves node will clamp input to 0..1 which is rather useless
when one wants to use HDR image textures and do bit of correction on them.
Now kernel code supports extrapolation of baked LUT based on first/last two
table points and performs linear extrapolation.
The only tricky part is to guess the range to bake the LUT for. Currently
it's using simple approach -- minmax of the input curves. While this behaves
ok for the simple cases it's easy to trick the system up causing incorrect
results.
Not sure we can solve those issues in a general case and since the new code
is giving more expected results it's not that bad actually. In the worst
case artist migh always create explicit point to make sure LUT is created
for the needed HDR range.
Reviewers: brecht, juicyfruit
Subscribers: sebastian_k
Differential Revision: https://developer.blender.org/D1658
|
|
Shutter curve now can be controlled using curve mapping widget in the motion
blur panel in Render buttons. Only mapping from 0..1 by x axis are allowed,
Y values will be normalized to fill in 0..1 space as well automatically.
Y values of 0 means fully closed shutter, Y values of 1 means fully opened
shutter.
Default mapping is set to old behavior when shutter opens and closes instantly.
This shutter mapping curve could easily be used by any other render engine by
accessing scene.render.motion_blur_shutter_curve.
Reviewers: #cycles, brecht, juicyfruit, campbellbarton
Differential Revision: https://developer.blender.org/D1585
|
|
Title says it all, based on feedback of artists from gooseberry team.
This mainly affects cases when going to a local view from layers setup
when some lamps were on invisible layers. Those lights are no longer
becoming visible to the object in local view.
Reviewers: brecht, juicyfruit, dingto
Reviewed By: juicyfruit, dingto
Subscribers: maxon, eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1326
|
|
|
|
The idea is to make it possible to control linked duplicated objects motion
blur from the scene file without need to do overrides on the linked object
settings. Currently only supported for dupligroup duplication and all now
if duplicator object has motion blur disabled then it'll be inherited into
all the duplicated objects.
There should be no regressions/changes in look of existing files because
objects do have motion blur enabled by default.
|
|
This inconsistency drove me totally crazy, it's really confusing
when it's inconsistent especially when you work on both Cycles and
Blender sides.
Shouldn;t cause merge PITA, it's whitespace changes only, Git should
be able to merge it nicely.
|
|
The purpose of this change is to add extra possibility to render engines and
export scripts to reduce peak memory footprint during their operation.
This new argument should be used with care since it'll leave mesh in not really
compatible with blender format, but it's ok to be used on temp meshes.
Unfortunately, it's hard to get scene where it'll show huge benefit because
in my tests with cycles peak memory is reached in MEM_printmemlist_stats().
However, in the file with sintel dragon it gives around 1gig of memory benefit
after removing the polys which would allow other heavy to compute stuff such as
hair (or even pointiness calculation) to not be a peak memory usage.
In any case, this change is nice to have IMO, and only means more parts of
scene export code should be optimized memory-wise.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D1125
|
|
Issue was, when requesting (building) lnors for a mesh that has
autosmooth disabled, one would expect to simply get vnors as lnors.
Until now, it wasn't the case, which was bad e.g. for normal projections
of loops in recent remap code (projecting along split loop normals
when you would expect projection along vertex normals...).
Also, removed the 'angle' parameter from RNA's `mesh.calc_normals_split`.
This should *always* use mesh settings (both autosmooth and smoothresh),
otherwise once again we'd get inconsistencies in some cases.
Will update fbx and obj addons too.
|
|
This was already mixed a bit, but the dot belongs there.
|
|
|
|
Converting empty object to mesh can generate a 'Null' BL:Mesh, we have to check against it.
|
|
Idea and code by Brecht, many thanks!
Reviewers: brecht
Reviewed By: brecht
CC: campbellbarton, dingto
Differential Revision: https://developer.blender.org/D369
|
|
These can currently be accessed by adding an Attribute node and specifying one
of those three names. A Smoke/Fire node should be added at some point to make
this more convenient.
These values might change still before the release, in particular for flame the
meaning seems unclear, it's just values in the 0..1 range. This is useful for
color ramps, but it might be good if this was also available as temperature in
kelvin so it can be plugged into the blackbody node. But I couldn't figure out
from the smoke code if or how this corresponds to a physical unit.
Here's a (quite poor) example file for a fire + smoke setup:
http://www.pasteall.org/blend/27990
|
|
motion steps.
Notes:
* The motion steps only affect deformation motion blur.
* The actual number of steps is 2^(steps - 1). This avoids having to sample at
many different times for object with more/fewer steps, now the times overlap.
* Deformation motion blur is enabled by default in existing files that have
motion blur enabled. If the object is not deforming, this will be detected at
export time, so raytracing performance will not be affected.
Part of the code is from the summer of code project by Gavin Howard.
|
|
render).
|
|
It wasn't working together well with the python thread state changes after the
depsgraph multithreading.
|
|
More information in this post:
http://code.blender.org/
Thanks to all contributes for giving their permission!
|
|
* Put render resolution x/y into a function.
|
|
meshes.
|
|
- pass string size to BLI_timestr() to avoid possible buffer overrun.
- quiet warning for mingw.
- include guards for windows utf conversion funcs.
- fix for mistage in edge-angle-selection check.
- some style cleanup.
|
|
PyNodes opens up the node system in Blender to scripters and adds a number of UI-level improvements.
=== Dynamic node type registration ===
Node types can now be added at runtime, using the RNA registration mechanism from python. This enables addons such as render engines to create a complete user interface with nodes.
Examples of how such nodes can be defined can be found in my personal wiki docs atm [1] and as a script template in release/scripts/templates_py/custom_nodes.py [2].
=== Node group improvements ===
Each node editor now has a tree history of edited node groups, which allows opening and editing nested node groups. The node editor also supports pinning now, so that different spaces can be used to edit different node groups simultaneously. For more ramblings and rationale see (really old) blog post on code.blender.org [3].
The interface of node groups has been overhauled. Sockets of a node group are no longer displayed in columns on either side, but instead special input/output nodes are used to mirror group sockets inside a node tree. This solves the problem of long node lines in groups and allows more adaptable node layout. Internal sockets can be exposed from a group by either connecting to the extension sockets in input/output nodes (shown as empty circle) or by adding sockets from the node property bar in the "Interface" panel. Further details such as the socket name can also be changed there.
[1] http://wiki.blender.org/index.php/User:Phonybone/Python_Nodes
[2] http://projects.blender.org/scm/viewvc.php/trunk/blender/release/scripts/templates_py/custom_nodes.py?view=markup&root=bf-blender
[3] http://code.blender.org/index.php/2012/01/improving-node-group-interface-editing/
|
|
a mesh. (OBJ export no longer needs, so save some CPU cycles and skip tessellation)
|
|
Issue was caused by couple of circumstances:
- Normal Map node requires tesselated faces to compute tangent space
- All temporary meshes needed for Cycles export were adding to G.main
- Undo pushes would temporary set meshes tessfaces to NULL
- Moving node will cause undo push and tree re-evaluate fr preview
All this leads to threading conflict between preview render and undo
system.
Solved it in way that all temporary meshes are adding to that exact
Main which was passed to Cycles via BlendData. This required couple
of mechanic changes like adding extra parameter to *_add() functions
and adding some *_ex() functions to make it possible RNA adds objects
to Main passed to new() RNA function.
This was tricky to pass Main to RNA function and IMO that's not so
nice to pass main to function, so ended up with such decision:
- Object.to_mesh() will add temp mesh to G.main
- Added Main.meshes.new_from_object() which does the same as to_mesh,
but adds temporary mesh to specified Main.
So now all temporary meshes needed for preview render would be added
to preview_main which does not conflict with undo pushes.
Viewport render shall not be an issue because object sync happens from
main thread in this case.
It could be some issues with final render, but that's not so much
likely to happen, so shall be fine.
Thanks to Brecht for review!
|
|
This adds support of movie textures for Cycles rendering.
Uses the same builtin images routines as packed/generated images,
but with some extra non-rna hookups from blender_session side.
Basically, it's not so clear how to give access to video frames
via C++ RNA -- it'll require exposing ImBuf to API, doing some
threading locks and so. Ended up adding two more functions which
are actually bad level call, but don't consider it's so much bad
-- we have few bad calls already, which are actually related.
Changed a bit how builtin images names are passing to image
manager. Now it's not just an ID datablock name, but also a frame
number concatenated via '@' character, which makes itpossible to
easily know frame number to be used for movie images, without
adding extra descriptors to image manager.
Decoding of builtin name is a bit slower now, but it should be
still nothing in comparison with rendering complexity.
Also exposed image user's frame_current to python API, which
is needed to get absolute frame number of movie from node's
image user.
P.S. Generated/packed images are also using bad level call but
only does it to make things more clear here. Either all images
are using C++ RNA here or no images does. That's the most clear
for now.
|
|
textures now work without having to add a UV map.
Also made UV and intercept attributes only export when needed by the shader.
|
