Age | Commit message (Collapse) | Author |
|
This commit adds a new model to the Sky Texture node, which is based on a
method by Nishita et al. and works by basically simulating volumetric
scattering in the atmosphere.
By making some approximations (such as only considering single scattering),
we get a fairly simple and fast simulation code that takes into account
Rayleigh and Mie scattering as well as Ozone absorption.
This code is used to precompute a 512x128 texture which is then looked up
during render time, and is fast enough to allow real-time tweaking in the
viewport.
Due to the nature of the simulation, it exposes several parameters that
allow for lots of flexibility in choosing the look and matching real-world
conditions (such as Air/Dust/Ozone density and altitude).
Additionally, the same volumetric approach can be used to compute absorption
of the direct sunlight, so the model also supports adding direct sunlight.
This makes it significantly easier to set up Sun+Sky illumination where
the direction, intensity and color of the sun actually matches the sky.
In order to support properly sampling the direct sun component, the commit
also adds logic for sampling a specific area to the kernel light sampling
code. This is combined with portal and background map sampling using MIS.
This sampling logic works for the common case of having one Sky texture
going into the Background shader, but if a custom input to the Vector
node is used or if there are multiple Sky textures, it falls back to using
only background map sampling (while automatically setting the resolution to
4096x2048 if auto resolution is used).
More infos and preview can be found here:
https://docs.google.com/document/d/1gQta0ygFWXTrl5Pmvl_nZRgUw0mWg0FJeRuNKS36m08/view
Underlying model, implementation and documentation by Marco (@nacioss).
Improvements, cleanup and sun sampling by @lukasstockner.
Differential Revision: https://developer.blender.org/D7896
|
|
This simplifies compositors setups and will be consistent with Eevee render
passes from D6331. There's a continuum between these passes and it's not clear
there is much advantage to having them available separately.
Differential Revision: https://developer.blender.org/D6848
|
|
With upcoming light group passes, for them to sum up correctly to the combined
pass the clamping must be more fine grained.
This also has the advantage that if one light is particularly noisy, it does
not diminish the contribution from other lights which do not need as much
clamping.
Clamp values on existing scenes will need to be tweaked to get similar results,
there is no automatic conversion possible which would give the same results as
before.
Implemented by Lukas, with tweaks by Brecht.
Part of D4837
|
|
Custom render passes are added in the Shader AOVs panel in the view layer
settings, with a name and data type. In shader nodes, an AOV Output node
is then used to output either a value or color to the pass.
Arbitrary names can be used for these passes, as long as they don't conflict
with built-in passes that are enabled. The AOV Output node can be used in both
material and world shader nodes.
Implemented by Lukas, with tweaks by Brecht.
Differential Revision: https://developer.blender.org/D4837
|
|
Ref D5363
|
|
This will be used by Optix to help the compiler figure out scoping. It is not
used by other devices currently, but worth testing if it helps there too.
Ref D5363
|
|
This makes little difference for CUDA and OpenCL, but will be helpful
for Optix.
|
|
Uninitialized variables are harder to handle for the compiler.
Ref D5363
|
|
Cycles lights now use strength and color properties of the light outside
of the shading nodes, just like Eevee. The shading nodes then act as a
multiplier on this, and become optional unless textures, fallof or other
effects are desired.
Backwards compatibility is not exact, as we can't be sure which renderer
the .blend was designed for or even if it was designed for a single one.
If the render engine in the active scene is set to Cycles, lights are
converted to ensure overall light strength remains the same, and removing
unnecessary shader node setups that only included a single emission node.
If the engine is set to Eevee, we increase strength to remove the automatic
100x multiplier that was there to match Cycles.
Differential Revision: https://developer.blender.org/D4588
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
Skip shader evaluation then, as we already do for lights. Less than
1% faster in my tests, but might as well be consistent for both.
|
|
|
|
sampling map
The automatic mode checks all Enviroment Texture nodes and picks the largest image's resolution.
If there are no Enviroment Textures, it just uses the old default.
Also, the sampling map now isn't limited to square shapes. The automatic detection uses the exact image size,
the manual UI option now halves the value to get the height.
A default aspect ratio of 2:1 makes sense since this is what most HDRIs use.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D3477
|
|
Original patch by Stefan with modifications by Brecht.
|
|
We now continue transparent paths after diffuse/glossy/transmission/volume
bounces are exceeded. This avoids unexpected boundaries in volumes with
transparent boundaries. It is also required for MIS to work correctly with
transparent surfaces, as we also continue through these in shadow rays.
The main visible changes is that volumes will now be lit by the background
even at volume bounces 0, same as surfaces.
Fixes T53914 and T54103.
|
|
With a Titan Xp, reduces path trace local memory from 1092MB to 840MB.
Benchmark performance was within 1% with both RX 480 and Titan Xp.
Original patch was implemented by Sergey.
Differential Revision: https://developer.blender.org/D2249
|
|
Similar to what we did for area lights previously, this should help
preserve stratification when using multiple BSDFs in theory. Improvements
are not easily noticeable in practice though, because the number of BSDFs
is usually low. Still nice to eliminate one sampling dimension.
|
|
Benchmarks peformance on GTX 1080 and RX 480 on Linux is the same for
bmw27, classroom, pabellon, and about 2% faster on fishy_cat and koro.
|
|
This was needed when we accessed OSL closure memory after shader evaluation,
which could get overwritten by another shader evaluation. But all closures
are immediatley converted to ShaderClosure now, so no longer needed.
|
|
Also pass by value and don't write back now that it is just a hash for seeding
and no longer an LCG state. Together this makes CUDA a tiny bit faster in my
tests, but mainly simplifies code.
|
|
This implements Arvo's "Stratified sampling of spherical triangles". Similar to how we sample rectangular area lights, this is sampling triangles over their solid angle. It does significantly improve sampling close to the triangle, but doesn't do much for more distant triangles. So I added a simple heuristic to switch between the two methods. Unfortunately, I expect this to add render time in any case, even when it does not make any difference whatsoever. It'll take some benchmarking with various scenes and hardware to estimate how severe the impact is and if it is worth the change.
Reviewers: #cycles, brecht
Reviewed By: #cycles, brecht
Subscribers: Vega-core, brecht, SteffenD
Tags: #cycles
Differential Revision: https://developer.blender.org/D2730
|
|
It uses an idea of accumulating all possible light reachable across the
light path (without taking shadow blocked into account) and accumulating
total shaded light across the path. Dividing second figure by first one
seems to be giving good estimate of the shadow.
In fact, to my knowledge, it's something really similar to what is
happening in the denoising branch, so we are aligned here which is good.
The workflow is following:
- Create an object which matches real-life object on which shadow is
to be catched.
- Create approximate similar material on that object.
This is needed to make indirect light properly affecting CG objects
in the scene.
- Mark object as Shadow Catcher in the Object properties.
Ideally, after doing that it will be possible to render the image and
simply alpha-over it on top of real footage.
|
|
|
|
|
|
their expected contribution
In scenes with many lights, some of them might have a very small contribution to some pixels, but the shadow rays are traced anyways.
To avoid that, this patch adds probabilistic termination to light samples - if the contribution before checking for shadowing is below a user-defined threshold, the sample will be discarded with probability (1 - (contribution / threshold)) and otherwise kept, but weighted more to remain unbiased.
This is the same approach that's also used in path termination based on length.
Note that the rendering remains unbiased with this option, it just adds a bit of noise - but if the setting is used moderately, the speedup gained easily outweighs the additional noise.
Reviewers: #cycles
Subscribers: sergey, brecht
Differential Revision: https://developer.blender.org/D2217
|
|
When using the Normal output of the Texture Coordinate node on Point and Spot lamps, the coordinates now depend on the rotation of the lamp.
On Area lamps, the Parametric output of the Geometry node now returns UV coordinates on the area lamp.
Credit for the Area lamp part goes to Stefan Werner (from D1995).
|
|
Reviewers: brecht, sergey, dingto, juicyfruit
Differential Revision: https://developer.blender.org/D2220
|
|
Using ones complement for detecting if transform has been applied was confusing
and led to several bugs. With this proper checks are made.
Also added a few transforms where they were missing, mostly affecting baking
and displacement when `P` is used in the shader (previously `P` was in the
wrong space for these shaders)
Also removed `TIME_INVALID` as this may have resulted in incorrect
transforms in some cases.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2192
|
|
Most of the time, Lamps in Cycles are just a constant emission closure, no texturing etc. Therefore, running a full shader evaluation is wasteful.
To avoid that, Cycles now detects these constant emission shaders and stores their value in the lamp data along with a flag in the shader.
Then, at runtime, if this flag is set, the lamp code just uses this value and only runs the full shader evaluation if it is neccessary.
In scenes with a lot of lamps and with "Sample all direct/indirect" enabled, this saves up to 20% of rendering time in my tests.
Reviewers: #cycles
Differential Revision: https://developer.blender.org/D2193
|
|
Glossy, Anisotropic and Glass BSDFs
This commit adds a new distribution to the Glossy, Anisotropic and Glass BSDFs that implements the
multiple-scattering microfacet model described in the paper "Multiple-Scattering Microfacet BSDFs with the Smith Model".
Essentially, the improvement is that unlike classical GGX, which only models single scattering and assumes
the contribution of multiple bounces to be zero, this new model performs a random walk on the microsurface until
the ray leaves it again, which ensures perfect energy conservation.
In practise, this means that the "darkening problem" - GGX materials becoming darker with increasing
roughness - is solved in a physically correct and efficient way.
The downside of this model is that it has no (known) analytic expression for evalation. However, it can be
evaluated stochastically, and although the correct PDF isn't known either, the properties of MIS and the
balance heuristic guarantee an unbiased result at the cost of slightly higher noise.
Reviewers: dingto, #cycles, brecht
Reviewed By: dingto, #cycles, brecht
Subscribers: bliblubli, ace_dragon, gregzaal, brecht, harvester, dingto, marcog, swerner, jtheninja, Blendify, nutel
Differential Revision: https://developer.blender.org/D2002
|
|
undefined type for lamp objects
The problem here was that there are five path types internally (diffuse, glossy, transmission, subsurface and volume scatter), but subsurface isn't exposed to the user.
This caused some weird behaviour - if all four types are disabled on the lamp, Cycles doesn't even try sampling it, but if any type was active, the lamp would illuminate
the cube since none of the options set subsurface to zero.
In the future, it might be reasonable to add subsurface visibility as an option - but for now the weird and inconsistent behaviour can be fixed simply by setting both
diffuse and subsurface to zero if the user disables diffuse visibility.
|
|
57% less for path and 48% less for branched path.
|
|
Quite straightforward, main trick is happening in path_source_replace_includes().
Reviewers: brecht, dingto, lukasstockner97, juicyfruit
Differential Revision: https://developer.blender.org/D1794
|
|
Use KernelGlobals to access all the global arrays for the intermediate
storage instead of passing all this storage things explicitly.
Tested here with Intel OpenCL, NVIDIA GTX580 and AMD Fiji, didn't see
any artifacts, so guess it's all good.
Reviewers: juicyfruit, dingto, lukasstockner97
Differential Revision: https://developer.blender.org/D1736
|
|
This commit changes the way how we pass bounce information to the Light
Path node. Instead of manualy copying the bounces into ShaderData, we now
directly pass PathState. This reduces the arguments that we need to pass
around and also makes it easier to extend the feature.
This commit also exposes the Transmission Bounce Depth to the Light Path
node. It works similar to the Transparent Depth Output: Replace a
Transmission lightpath after X bounces with another shader, e.g a Diffuse
one. This can be used to avoid black surfaces, due to low amount of max
bounces.
Reviewed by Sergey and Brecht, thanks for some hlp with this.
I tested compilation and usage on CPU (SVM and OSL), CUDA, OpenCL Split
and Mega kernel. Hopefully this covers all devices. :)
|
|
Path Tracing
Multiple importance sampling for branched path tracing light samples needs to be
calculated separately per BSDF, not with Veach's one sample model.
|
|
|
|
This commit contains all the work related on the AMD megakernel split work
which was mainly done by Varun Sundar, George Kyriazis and Lenny Wang, plus
some help from Sergey Sharybin, Martijn Berger, Thomas Dinges and likely
someone else which we're forgetting to mention.
Currently only AMD cards are enabled for the new split kernel, but it is
possible to force split opencl kernel to be used by setting the following
environment variable: CYCLES_OPENCL_SPLIT_KERNEL_TEST=1.
Not all the features are supported yet, and that being said no motion blur,
camera blur, SSS and volumetrics for now. Also transparent shadows are
disabled on AMD device because of some compiler bug.
This kernel is also only implements regular path tracing and supporting
branched one will take a bit. Branched path tracing is exposed to the
interface still, which is a bit misleading and will be hidden there soon.
More feature will be enabled once they're ported to the split kernel and
tested.
Neither regular CPU nor CUDA has any difference, they're generating the
same exact code, which means no regressions/improvements there.
Based on the research paper:
https://research.nvidia.com/sites/default/files/publications/laine2013hpg_paper.pdf
Here's the documentation:
https://docs.google.com/document/d/1LuXW-CV-sVJkQaEGZlMJ86jZ8FmoPfecaMdR-oiWbUY/edit
Design discussion of the patch:
https://developer.blender.org/T44197
Differential Revision: https://developer.blender.org/D1200
|
|
This patch adds support for light portals: objects that help sampling the
environment light, therefore improving convergence. Using them tor other
lights in a unidirectional pathtracer is virtually useless.
The sampling is done with the area-preserving code already used for area lamps.
MIS is used both for combination of different portals and for combining portal-
and envmap-sampling.
The direction of portals is considered, they aren't used if the sampling point
is behind them.
Reviewers: sergey, dingto, #cycles
Reviewed By: dingto, #cycles
Subscribers: Lapineige, nutel, jtheninja, dsisco11, januz, vitorbalbio, candreacchio, TARDISMaker, lichtwerk, ace_dragon, marcog, mib2berlin, Tunge, lopataasdf, lordodin, sergey, dingto
Differential Revision: https://developer.blender.org/D1133
|
|
Issue was caused by accident in c8a9a56 which not only disabled glossy
reflection if Glossy visibility is disabled, but also Diffuse reflection.
Quite safe and should go to final release branch.
|
|
There seems to be inconsistency in flags checks in Cycles kernel. In the interface
glossy means "Glossy Reflection" and it is properly taken into account when doing
visibility check in BVH traversal.
The check in indirect background/light emission was treating this flags as "any of
glossy reflection or transmission" which is kind of weird.
Made it so emission code follows ray visibility assumptions in other parts of the
kernel now.
|
|
This was already mixed a bit, but the dot belongs there.
|
|
This adds a new "Volume Scatter" option to the "Ray Visibility" panels and can be used to e.g. exclude lamps from having an influence on the volume. See release logs for an example: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.72/Cycles
Differential revision: https://developer.blender.org/D771
|
|
* Volume multiple importace sampling support to combine equiangular and distance
sampling, for both homogeneous and heterogeneous volumes.
* Branched path "Sample All Direct Lights" and "Sample All Indirect Lights" now
apply to volumes as well as surfaces.
Implementation note:
For simplicity this is all done with decoupled ray marching, the only case we do
not use decoupled is for distance only sampling with one light sample. The
homogeneous case should still compile on the GPU because it only requires fixed
size storage, but the heterogeneous case will be trickier to get working.
|
|
|
|
|
|
Probably will not be noticed in most scenes. This helps reduce noise when you
have multiple lamps with MIS enabled, at the cost of some performance, but from
testing some scenes this seems better.
|
|
Differential Revision: https://developer.blender.org/D477
|
|
This was the original code to get things working on old GPUs, but now it is no
longer in use and various features in fact depend on this to work correctly to
the point that enabling this code is too buggy to be useful.
|