| Age | Commit message (Collapse) | Author |
|---|
|
Spotted by Ha Hyung-jin, thanks!
|
|
|
|
|
|
With a Titan Xp, reduces path trace local memory from 1092MB to 840MB.
Benchmark performance was within 1% with both RX 480 and Titan Xp.
Original patch was implemented by Sergey.
Differential Revision: https://developer.blender.org/D2249
|
|
|
|
|
|
|
|
|
|
|
|
It is more readable to explicitly compare to NULL anyway.
|
|
For the first bounce we now give each BSDF or BSSRDF a minimum sample weight,
which helps reduce noise for a typical case where you have a glossy BSDF with
a small weight due to Fresnel, but not necessarily small contribution relative
to a diffuse or transmission BSDF below.
We can probably find a better heuristic that also enables this on further
bounces, for example when looking through a perfect mirror, but I wasn't able
to find a robust one so far.
|
|
Similar to what we did for area lights previously, this should help
preserve stratification when using multiple BSDFs in theory. Improvements
are not easily noticeable in practice though, because the number of BSDFs
is usually low. Still nice to eliminate one sampling dimension.
|
|
|
|
Benchmarks peformance on GTX 1080 and RX 480 on Linux is the same for
bmw27, classroom, pabellon, and about 2% faster on fishy_cat and koro.
|
|
This was needed when we accessed OSL closure memory after shader evaluation,
which could get overwritten by another shader evaluation. But all closures
are immediatley converted to ShaderClosure now, so no longer needed.
|
|
|
|
|
|
Also pass by value and don't write back now that it is just a hash for seeding
and no longer an LCG state. Together this makes CUDA a tiny bit faster in my
tests, but mainly simplifies code.
|
|
Added some extra tirckery to avoid background being tinted dark with transparent
surface. Maybe a bit hacky, but seems to work fine.
|
|
Those are nothing to do with BVH, and can be used separately.
|
|
This commit contains the first part of the new Cycles denoising option,
which filters the resulting image using information gathered during rendering
to get rid of noise while preserving visual features as well as possible.
To use the option, enable it in the render layer options. The default settings
fit a wide range of scenes, but the user can tweak individual settings to
control the tradeoff between a noise-free image, image details, and calculation
time.
Note that the denoiser may still change in the future and that some features
are not implemented yet. The most important missing feature is animation
denoising, which uses information from multiple frames at once to produce a
flicker-free and smoother result. These features will be added in the future.
Finally, thanks to all the people who supported this project:
- Google (through the GSoC) and Theory Studios for sponsoring the development
- The authors of the papers I used for implementing the denoiser (more details
on them will be included in the technical docs)
- The other Cycles devs for feedback on the code, especially Sergey for
mentoring the GSoC project and Brecht for the code review!
- And of course the users who helped with testing, reported bugs and things
that could and/or should work better!
|
|
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
|
|
Simplifies code quite a bit, making it shorter and easier to extend.
Currently no functional changes for users, but is required for the
upcoming work of shadow catcher support with OpenCL.
|
|
It uses an idea of accumulating all possible light reachable across the
light path (without taking shadow blocked into account) and accumulating
total shaded light across the path. Dividing second figure by first one
seems to be giving good estimate of the shadow.
In fact, to my knowledge, it's something really similar to what is
happening in the denoising branch, so we are aligned here which is good.
The workflow is following:
- Create an object which matches real-life object on which shadow is
to be catched.
- Create approximate similar material on that object.
This is needed to make indirect light properly affecting CG objects
in the scene.
- Mark object as Shadow Catcher in the Object properties.
Ideally, after doing that it will be possible to render the image and
simply alpha-over it on top of real footage.
|
|
Decoupled ray marching is not supported yet.
Transparent shadows are always enabled for volume rendering.
Changes in kernel/bvh and kernel/geom are from Sergey.
This simiplifies code significantly, and prepares it for
record-all transparent shadow function in split kernel.
|
|
|
|
|
|
We started to run out of bits there, so now we separate flags
which came from __object_flags and which are either runtime or
coming from __shader_flags.
Rule now is: SD_OBJECT_* flags are to be tested against new
object_flags field of ShaderData, all the rest flags are to
be tested against flags field of ShaderData.
There should be no user-visible changes, and time difference
should be minimal. In fact, from tests here can only see hardly
measurable difference and sometimes the new code is somewhat
faster (all within a noise floor, so hard to tell for sure).
Reviewers: brecht, dingto, juicyfruit, lukasstockner97, maiself
Differential Revision: https://developer.blender.org/D2428
|
|
|
|
commit
Basically, the problem here was that the transform that's used to bring texture coordinates
to world space is either fetched while setting up the shader (with Object Motion is enabled) or
fetched when needed (otherwise). That helps to save ShaderData memory on OpenCL when Object Motion isn't needed.
Now, if OM is enabled, the Lamp transform can just be stored inside the ShaderData as well. The original commit just assumed it is.
However, when it's not (on OpenCL by default, for example), there is no easy way to fetch it when needed, since the ShaderData doesn't
store the Lamp index.
So, for now the lamps just don't support local texture coordinates anymore when Object Motion is disabled.
To fix and support this properly, one of the following could be done:
- Just always pre-fetch the transform. Downside: Memory Usage increases when not using OM on OpenCL
- Add a variable to ShaderData that stores the Lamp ID to allow fetching it when needed
- Store the Lamp ID inside prim or object. Problem: Cycles currently checks these for whether an object was hit - these checks would need to be changed.
- Enable OM whenever a Texture Coordinate's Normal output is used. Downside: Might not actually be needed.
|
|
their expected contribution
In scenes with many lights, some of them might have a very small contribution to some pixels, but the shadow rays are traced anyways.
To avoid that, this patch adds probabilistic termination to light samples - if the contribution before checking for shadowing is below a user-defined threshold, the sample will be discarded with probability (1 - (contribution / threshold)) and otherwise kept, but weighted more to remain unbiased.
This is the same approach that's also used in path termination based on length.
Note that the rendering remains unbiased with this option, it just adds a bit of noise - but if the setting is used moderately, the speedup gained easily outweighs the additional noise.
Reviewers: #cycles
Subscribers: sergey, brecht
Differential Revision: https://developer.blender.org/D2217
|
|
|
|
When using the Normal output of the Texture Coordinate node on Point and Spot lamps, the coordinates now depend on the rotation of the lamp.
On Area lamps, the Parametric output of the Geometry node now returns UV coordinates on the area lamp.
Credit for the Area lamp part goes to Stefan Werner (from D1995).
|
|
|
|
Reviewers: brecht, sergey, dingto, juicyfruit
Differential Revision: https://developer.blender.org/D2220
|
|
Using ones complement for detecting if transform has been applied was confusing
and led to several bugs. With this proper checks are made.
Also added a few transforms where they were missing, mostly affecting baking
and displacement when `P` is used in the shader (previously `P` was in the
wrong space for these shaders)
Also removed `TIME_INVALID` as this may have resulted in incorrect
transforms in some cases.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2192
|
|
Spotted by Mai Lavelle, thanks!
|
|
Makes it so toolkit does exactly the same decision about what to inline,
but unfortunately it has really barely visible difference on GTX-980.
|
|
All the changes are mainly giving explicit tips on inlining functions,
so they match how inlining worked with previous toolkit.
This make kernel compiled by CUDA 8 render in average with same speed
as previous kernels. Some scenes are somewhat faster, some of them are
somewhat slower. But slowdown is within 1% so far.
On a positive side it allows us to enable newer generation cards on
buildbots (so GTX 10x0 will be officially supported soon).
|
|
Reviewed By: dingto, sergey
Differential Revision: https://developer.blender.org/D2127
|
|
Make sure we don't perform any implicit address space conversion.
A bit annoying, but less intrusive approaches (like using temp private
variable in .cl kernel) do not work correct here.
Using generic address space will help from code side here, but will
be somewhat slower due to extra things happening as far as i know.
|
|
Glossy, Anisotropic and Glass BSDFs
This commit adds a new distribution to the Glossy, Anisotropic and Glass BSDFs that implements the
multiple-scattering microfacet model described in the paper "Multiple-Scattering Microfacet BSDFs with the Smith Model".
Essentially, the improvement is that unlike classical GGX, which only models single scattering and assumes
the contribution of multiple bounces to be zero, this new model performs a random walk on the microsurface until
the ray leaves it again, which ensures perfect energy conservation.
In practise, this means that the "darkening problem" - GGX materials becoming darker with increasing
roughness - is solved in a physically correct and efficient way.
The downside of this model is that it has no (known) analytic expression for evalation. However, it can be
evaluated stochastically, and although the correct PDF isn't known either, the properties of MIS and the
balance heuristic guarantee an unbiased result at the cost of slightly higher noise.
Reviewers: dingto, #cycles, brecht
Reviewed By: dingto, #cycles, brecht
Subscribers: bliblubli, ace_dragon, gregzaal, brecht, harvester, dingto, marcog, swerner, jtheninja, Blendify, nutel
Differential Revision: https://developer.blender.org/D2002
|
|
Quite straightforward, main trick is happening in path_source_replace_includes().
Reviewers: brecht, dingto, lukasstockner97, juicyfruit
Differential Revision: https://developer.blender.org/D1794
|
|
|
|
The goal is to make Experimental kernel closer in performance to the
official kernel, avoiding spills and such.
There should not be big impact on official kernel, own tests showed
few percent performance drop on laptop's GPU. CPU was always the
same speed on AVX, AVX2 and SSE4.1 CPUs i've been testing here.
This seems to be the last essential step before we can get rid of
Experimental kernel and enable SSS officially on GPU without causing
some major performance issues.
Surely some more tweaks are possibly required, but that we can do
for until cows go home anyway.
|
|
This commit changes the way how we pass bounce information to the Light
Path node. Instead of manualy copying the bounces into ShaderData, we now
directly pass PathState. This reduces the arguments that we need to pass
around and also makes it easier to extend the feature.
This commit also exposes the Transmission Bounce Depth to the Light Path
node. It works similar to the Transparent Depth Output: Replace a
Transmission lightpath after X bounces with another shader, e.g a Diffuse
one. This can be used to avoid black surfaces, due to low amount of max
bounces.
Reviewed by Sergey and Brecht, thanks for some hlp with this.
I tested compilation and usage on CPU (SVM and OSL), CUDA, OpenCL Split
and Mega kernel. Hopefully this covers all devices. :)
|
|
Path Tracing
Multiple importance sampling for branched path tracing light samples needs to be
calculated separately per BSDF, not with Veach's one sample model.
|
|
* Did not check data2, this partially fixes T45583.
* Initialize data2 in some closures to avoid potential problems.
Differential Revision: https://developer.blender.org/D1436
|
|
|
|
|
