Age | Commit message (Collapse) | Author |
|
|
|
This should be the last Fermi removal commit, unless I missed something.
It's been a pleasure Fermi!
|
|
* Use common TextureInfo struct for all devices, except CUDA fermi.
* Move image sampling code to kernels/*/kernel_*_image.h files.
* Use arrays for data textures on Fermi too, so device_vector<Struct> works.
|
|
|
|
Image textures were being packed into a single buffer for OpenCL, which
limited the amount of memory available for images to the size of one
buffer (usually 4gb on AMD hardware). By packing textures into multiple
buffers that limit is removed, while simultaneously reducing the number
of buffers that need to be passed to each kernel.
Benchmarks were within 2%.
Fixes T51554.
Differential Revision: https://developer.blender.org/D2745
|
|
|
|
GPUs together
This commit unifies the flattened texture slot names for bindless and regular CUDA textures. Texture indices are now identical across all CUDA architectures, where before Fermi used different indices, which lead to problems when rendering on multi-GPU setups mixing Fermi with newer hardware.
|
|
The issue here was mainly coming from minimal pixel width feature
which is quite commonly enabled in production shots.
This feature will use some probabilistic heuristic in the curve
intersection function to check whether we need to return intersection
or not. This probability is calculated for every intersection check.
Now, when we use multiple BVH nodes for curve primitives we increase
probability of that primitive to be considered a good intersection
for us. This is similar to increasing minimal width of curve.
What is worst here is that change in the intersection probability
fully depends on exact layout of BVH, meaning probability might
change differently depending on a view angle, the way how builder
binned the primitives and such. This makes it impossible to do
simple check like dividing probability by number of BVH steps.
Other solution might have been to split BVH into fully independent
trees, but that will increase memory usage of all the static
objects in the scenes, which is also not something desirable.
For now used most simple but robust approach: store BVH primitives
time and test it in curve intersection functions. This solves the
regression, but has two downsides:
- Uses more memory.
which isn't surprising, and ANY solution to this problem will
use more memory.
What we still have to do is to avoid this memory increase for
cases when we don't use BVH motion steps.
- Reduces number of maximum available textures on pre-kepler cards.
There is not much we can do here, hardware gets old but we need
to move forward on more modern hardware..
|
|
kernel_textures.h is included in device_opencl.cpp, so we can't check
__KERNEL_OPENCL__ there.
|
|
|
|
This way OpenCL devices can also benefit from a smaller memory footprint, when using e.g. bumpmaps (greyscale, 1 channel).
Additional target for my GSoC 2016.
|
|
This adds support for ngons and attributes on subdivision meshes. Ngons are
needed for proper attribute interpolation as well as correct Catmull-Clark
subdivision. Several changes are made to achieve this:
- new primitive `SubdFace` added to `Mesh`
- 3 more textures are used to store info on patches from subd meshes
- Blender export uses loop interface instead of tessface for subd meshes
- `Attribute` class is updated with a simplified way to pass primitive counts
around and to support ngons.
- extra points for ngons are generated for O(1) attribute interpolation
- curves are temporally disabled on subd meshes to avoid various bugs with
implementation
- old unneeded code is removed from `subd/`
- various fixes and improvements
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2108
|
|
There are several internal changes for this:
First idea is to make __tri_verts to behave similar to __tri_storage,
meaning, __tri_verts array now contains all vertices of all triangles
instead of just mesh vertices. This saves some lookup when reading
triangle coordinates in functions like triangle_normal().
In order to make it efficient needed to store global triangle offset
somewhere. So no __tri_vindex.w contains a global triangle index which
can be used to read triangle vertices.
Additionally, the order of vertices in that array is aligned with
primitives from BVH. This is needed to keep cache as much coherent as
possible for BVH traversal. This causes some extra tricks needed to
fill the array in and deal with True Displacement but those trickery
is fully required to prevent noticeable slowdown.
Next idea was to use this __tri_verts instead of __tri_storage in
intersection code. Unfortunately, this is quite tricky to do without
noticeable speed loss. Mainly this loss is caused by extra lookup
happening to access vertex coordinate.
Fortunately, tricks here and there (i,e, some types changes to avoid
casts which are not really coming for free) reduces those losses to
an acceptable level. So now they are within couple of percent only,
On a positive site we've achieved:
- Few percent of memory save with triangle-only scenes. Actual save
in this case is close to size of all vertices.
On a more fine-subdivided scenes this benefit might become more
obvious.
- Huge memory save of hairy scenes. For example, on koro.blend
there is about 20% memory save. Similar figure for bunny.blend.
This memory save was the main goal of this commit to move forward
with Hair BVH which required more memory per BVH node. So while
this sounds exciting, this memory optimization will become invisible
by upcoming Hair BVH work.
But again on a positive side, we can add an option to NOT use Hair
BVH and then we'll have same-ish render times as we've got currently
but will have this 20% memory benefit on hairy scenes.
|
|
This adds support for CUDA Texture objects (also known as Bindless textures) for Kepler GPUs (Geforce 6xx and above).
This is used for all 2D/3D textures, data still uses arrays as before.
User benefits:
* No more limits of image textures on Kepler.
We had 5 float4 and 145 byte4 slots there before, now we have 1024 float4 and 1024 byte4.
This can be extended further if we need to (just change the define).
* Single channel textures slots (byte and float) are now supported on Kepler as well (1024 slots for each type).
ToDo / Issues:
* 3D textures don't work yet, at least don't show up during render. I have no idea whats wrong yet.
* Dynamically allocate bindless_mapping array?
I hope Fermi still works fine, but that should be tested on a Fermi card before pushing to master.
Part of my GSoC 2016.
Reviewers: sergey, #cycles, brecht
Subscribers: swerner, jtheninja, brecht, sergey
Differential Revision: https://developer.blender.org/D1999
|
|
Title says it all, this adds OpenCL float4 texture support.
There is a bug in the code still, I get a "Out of ressources error" on nvidia hardware here, not sure whats wrong yet.
Will investigate further, but maybe someone else has an idea. :)
Reviewers: #cycles, brecht
Subscribers: brecht, candreacchio
Differential Revision: https://developer.blender.org/D1983
|
|
|
|
float (single channel) and half_float slots.
Should be no functional changes, tested CPU and CUDA.
|
|
It's no longer a pre-computed data and just a storage of triangle
coordinates which are faster to access to.
|
|
Quite straightforward, main trick is happening in path_source_replace_includes().
Reviewers: brecht, dingto, lukasstockner97, juicyfruit
Differential Revision: https://developer.blender.org/D1794
|
|
Supports both smoke/fire and point density textures now.
Reduces number of textures available for sm_20 and sm_21, but you have
to compromise somewhere on such a limited hardware.
Currently limited to linear interpolation only, and decoupled ray
marching is not supported yet. Think those could be considered just a
further improvement.
Some quick example:
https://developer.blender.org/F282934
Code is minimal and we can fully consider it a fix for missing
support of 3D textures with CUDA.
Reviewers: lukasstockner97, brecht, juicyfruit, dingto
Reviewed By: brecht, juicyfruit, dingto
Subscribers: mib2berlin
Differential Revision: https://developer.blender.org/D1806
|
|
This way we can get rid of inefficient memory usage caused by BVH boundbox
part being unused by leaf nodes but still being allocated for them. Doing
such split allows to save 6 of float4 values for QBVH per leaf node and 3
of float4 values for regular BVH per leaf node.
This translates into following memory save using 01.01.01.G rendered
without hair:
Device memory size Device memory peak Global memory peak
Before the patch: 4957 5051 7668
With the patch: 4467 4562 7332
The measurements are done against current master. Still need to run speed tests
and it's hard to predict if it's faster or not: on the one hand leaf nodes are
now much more coherent in cache, on the other hand they're not so much coherent
with regular nodes anymore.
Reviewers: brecht, juicyfruit
Subscribers: venomgfx, eyecandy
Differential Revision: https://developer.blender.org/D1236
|
|
This was already mixed a bit, but the dot belongs there.
|
|
tri_shader does no longer need to a float.
Reviewers: dingto, sergey
Reviewed By: dingto, sergey
Subscribers: dingto
Projects: #cycles
Differential Revision: https://developer.blender.org/D789
|
|
|
|
* Added support for uchar4 attributes to Cycles' attribute system.
* This is used for Vertex Colors now, which saves some memory (4 unsigned characters, instead of 4 floats).
* GPU Texture Limit on sm_20 and sm_21 decreased from 95 to 94, because we need a new texture for the uchar4 attributes. This is no problem for sm_30 or newer.
Part of my GSoC 2014.
|
|
Instead of pre-calculation and storage, we now calculate the face normal during render.
This gives a small slowdown (~1%) but decreases memory usage, which is especially important for GPUs,
where you have limited VRAM.
Part of my GSoC 2014.
|
|
|
|
Instead of 95, we can use 145 images now. This only affects Kepler and above (sm30, sm_35 and sm_50).
This can be increased further if needed, but let's first test if this does not come with a performance impact.
Originally developed during my GSoC 2013.
|
|
|
|
More information in this post:
http://code.blender.org/
Thanks to all contributes for giving their permission!
|
|
|
|
number of keys in the curve, rather than curve segments with the indices of two
keys. ShaderData.segment now stores the segment number in the curve.
|
|
should be no functional changes yet. UV, tangent and intercept are now stored
as attributes, with the intention to add more like multiple uv's, vertex
colors, generated coordinates and motion vectors later.
Things got a bit messy due to having both triangle and curve data in the same
mesh data structure, which also gives us two sets of attributes. This will get
cleaned up when we split the mesh class.
|
|
Patch [#33445] - Experimental Cycles Hair Rendering (CPU only)
This patch allows hair data to be exported to cycles and introduces a new line segment primitive to render with.
The UI appears under the particle tab and there is a new hair info node available.
It is only available under the experimental feature set and for cpu rendering.
|
|
motion vector pass is not enabled.
|
|
Regular rendering now works tiled, and supports save buffers to save memory
during render and cache render results.
Brick texture node by Thomas.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Brick_Texture
Image texture Blended Box Mapping.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Image_Texture
http://mango.blender.org/production/blended_box/
Various bug fixes by Sergey and Campbell.
* Fix for reading freed memory in some node setups.
* Fix incorrect memory read when synchronizing mesh motion.
* Fix crash appearing when direct light usage is different on different layers.
* Fix for vector pass gives wrong result in some circumstances.
* Fix for wrong resolution used for rendering Render Layer node.
* Option to cancel rendering when doing initial synchronization.
* No more texture limit when using CPU render.
* Many fixes for new tiled rendering.
|
|
information in material shaders for dupli objects. For now only the particle Age and individual Lifetime (in frames) are supported, more attributes can be added when needed.
The particle data is stored in a separate texture if any of the dupli objects uses particle info nodes in shaders. To map dupli objects onto particles the store an additional particle_index value, which is different from the simple dupli object index (only visible particles, also works for particle dupli groups mode).
Some simple use cases on the code.blender.org blog:
http://code.blender.org/index.php/2012/05/particle-info-node/
|
|
* Added missing GPL licence block to kernel_textures.h
|
|
feature enabling #defines a bit.
|
|
Fix: texture coordinate normal output was not correct, still changed under
object transform.
|
|
and 5 float image textures. For CPU render this limit will be lifted later
on with image cache support. Patch by Mike Farnsworth.
Also changed color space option in image/environment texture node, to show
options Color and Non-Color Data, instead of sRGB and Linear, this is more
descriptive, and it was not really correct to equate Non-Color Data with
Linear.
|
|
By default lighting from the world is computed solely with indirect light
sampling. However for more complex environment maps this can be too noisy, as
sampling the BSDF may not easily find the highlights in the environment map
image. By enabling this option, the world background will be sampled as a lamp,
with lighter parts automatically given more samples.
Map Resolution specifies the size of the importance map (res x res). Before
rendering starts, an importance map is generated by "baking" a grayscale image
from the world shader. This will then be used to determine which parts of the
background are light and so should receive more samples than darker parts.
Higher resolutions will result in more accurate sampling but take more setup
time and memory.
Patch by Mike Farnsworth, thanks!
|
|
shader flags for various purposes, and some code for light types other than
points.
|
|
* Add max diffuse/glossy/transmission bounces
* Add separate min/max for transparent depth
* Updated/added some presets that use these options
* Add ray visibility options for objects, to hide them from
camera/diffuse/glossy/transmission/shadow rays
* Is singular ray output for light path node
Details here:
http://wiki.blender.org/index.php/Dev:2.5/Source/Render/Cycles/LightPaths
|
|
* Add alpha pass output, to use set Transparent option in Film panel.
* Add Holdout closure (OSL terminology), this is like the Sky option in the
internal renderer, objects with this closure show the background / zero
alpha.
* Add option to use Gaussian instead of Box pixel filter in the UI.
* Remove camera response curves for now, they don't really belong here in
the pipeline, should be moved to compositor.
* Output full float values for rendering now, previously was only byte precision.
* Add a patch from Thomas to get a preview passes option, but still disabled
because it isn't quite working right yet.
* CUDA: don't compile shader graph evaluation inline.
* Convert tabs to spaces in python files.
|
|
|