| Age | Commit message (Collapse) | Author |
|---|
|
The motivation for this is twofold. It improves performance (5-10% on most
benchmark scenes), and will help to bring back transparency support for the
ambient occlusion pass.
* Duplicate some members from the main path state in the shadow path state.
* Add shadow paths incrementally to the array similar to what we do for
the shadow catchers.
* For the scheduling, allow running shade surface and shade volume kernels
as long as there is enough space in the shadow paths array. If not, execute
shadow kernels until it is empty.
* Add IntegratorShadowState and ConstIntegratorShadowState typedefs that
can be different between CPU and GPU. For GPU both main and shadow paths
juse have an integer for SoA access. Bt with CPU it's a different pointer
type so we get type safety checks in code shared between CPU and GPU.
* For CPU, add a separate IntegratorShadowStateCPU struct embedded in
IntegratorShadowState.
* Update various functions to take the shadow state, and make SVM take either
type of state using templates.
Differential Revision: https://developer.blender.org/D12889
|
|
A Clang-Format configuration to make the closure definition block to
be properly recognized as such.
Also small wrapper macro to avoid comma in the actual definition code
which was causing unwanted indentation of parameters definition.
Requires Clang-Format 7 or newer. The version we ship in the libs is
12, so for recommended development setup it should all be good.
Differential Revision: https://developer.blender.org/D12920
|
|
|
|
* Rename struct KernelGlobals to struct KernelGlobalsCPU
* Add KernelGlobals, IntegratorState and ConstIntegratorState typedefs
that every device can define in its own way.
* Remove INTEGRATOR_STATE_ARGS and INTEGRATOR_STATE_PASS macros and
replace with these new typedefs.
* Add explicit state argument to INTEGRATOR_STATE and similar macros
In preparation for decoupling main and shadow paths.
Differential Revision: https://developer.blender.org/D12888
|
|
There is not enough time before the release to improve Random Walk to handle
all cases this was used for, so restore it for now.
Since there is no more path splitting in cycles-x, this can increase noise in
non-flat areas for the sample number of samples, though fewer rays will be traced
also. This is fundamentally a trade-off we made in the new design and why Random
Walk is a better fit. However the importance resampling we do now does help to
reduce noise.
Differential Revision: https://developer.blender.org/D12800
|
|
|
|
Goal is to add the length attribute to the Hair Info node, for better control over color gradients or similar along the hair.
Reviewed By: #eevee_viewport, brecht
Differential Revision: https://developer.blender.org/D10481
|
|
This includes much improved GPU rendering performance, viewport interactivity,
new shadow catcher, revamped sampling settings, subsurface scattering anisotropy,
new GPU volume sampling, improved PMJ sampling pattern, and more.
Some features have also been removed or changed, breaking backwards compatibility.
Including the removal of the OpenCL backend, for which alternatives are under
development.
Release notes and code docs:
https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Cycles
https://wiki.blender.org/wiki/Source/Render/Cycles
Credits:
* Sergey Sharybin
* Brecht Van Lommel
* Patrick Mours (OptiX backend)
* Christophe Hery (subsurface scattering anisotropy)
* William Leeson (PMJ sampling pattern)
* Alaska (various fixes and tweaks)
* Thomas Dinges (various fixes)
For the full commit history, see the cycles-x branch. This squashes together
all the changes since intermediate changes would often fail building or tests.
Ref T87839, T87837, T87836
Fixes T90734, T89353, T80267, T80267, T77185, T69800
|
|
|
|
|
|
This bumps OSL to 1.11.10.0. OSL Has a new build time
dependency: Clang, and more importantly it expects
clang and llvm to share a library folder, which it
previously for us did not.
This patch changes:
-OSL Update to 1.11.10.0
-refactor the llvm/clang/clang-tools-extra builds into the llvm
build using the llvm-project tarball for building that has all
of the subprojects in it.
-update ispc/openmp builds since clang no longer its own dependency
and they have to depend on the llvm build now.
-Update the windows builder to use the 64 bit host tools since it
ran out of ram linking clang
-Since OSL now needs clang to link successfully a findclang.cmake
has been provided for linux/OSX
Differential Revision: https://developer.blender.org/D10212
Reviewed By: brecht, sebbas, sybren
|
|
|
|
Comment blocks not conforming to convention.
|
|
Differential Revision: https://developer.blender.org/D10118
|
|
This is relatively expensive and as per the OSL spec, this value is not
expected to be meaningful for non-light shaders. This makes viewport updates
a little faster.
As a side effect also fixes T82723, viewport refresh issue with volume density.
|
|
This separates out PugiXML that was previously
bundled by OIIO.
As this linux/mac libs are not available
this commit only contains the builder and windows
changes, and the option to enable pugixml is
guarded by a platform if, this can be removed
once all platforms have committed the svn libs.
For details see D8628
|
|
Replace 'set' with 'string(APPEND/PREPEND ...)'.
This avoids duplicating the variable name.
|
|
Previously only float3 and byte4 was supported.
Ref D2057
|
|
This avoids OpenCL inlining heavy volume interpolation code once for every
data type, which could cause a performance regression when we add a float4
data type in the next commit.
Ref D2057
|
|
* Support precompiled libraries on Linux
* Add license headers
* Refactoring to deduplicate code
Includes work by Ray Molenkamp and Grische for precompiled libraries.
Ref D8769
|
|
The return value of scene_intersect must be checked, the isect struct members
can't be assumed to be initialized if that returns false.
Differential Revision: https://developer.blender.org/D8692
|
|
OSLRenderServices contains a member which is 64 bytes aligned and this
is onlys supported by default allocators in SDK 10.14. Since we take
care of allocation ourselves ignoring the diagnostic is an acceptable
way dealign with it.
|
|
The code to implement the newer closure in terms of the old one got lost in
the removal of our stdosl.h copy. Now implement it as a builtin closure.
|
|
Since the sampling and evaluation functions handle both cases anyways,
there's not really a point for keeping the distinction in the kernel,
so we might as well cut down the number of CLOSURE_BSDF_MICROFACETs a bit.
Differential Revision: https://developer.blender.org/D7736
|
|
|
|
|
|
This is not yet fully supported by automatic volume bounds but works fine in
most cases that will have mostly matching bounds.
Ref T73201
|
|
This is a bit weak since it's not entirely clear where the boundary is, but
tested to build and pass tests on all platforms.
|
|
|
|
|
|
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
|
|
Similar to the Microfacet Closures, the Principled BSDF Sheen closure is
added at a high weight but typically results in fairly low values.
Therefore, the default weight is a bad indicator of importance.
The fix here is the same as it was back then for Microfacets:
Compute an average weight using the normal as the half-vector
and use it to scale down the sample weight and the albedo channel.
In addition to drastically improving denoising of materials with
sheen when using the new Denoising node, this also can reduce noise
on such materials considerably.
|
|
Custom render passes are added in the Shader AOVs panel in the view layer
settings, with a name and data type. In shader nodes, an AOV Output node
is then used to output either a value or color to the pass.
Arbitrary names can be used for these passes, as long as they don't conflict
with built-in passes that are enabled. The AOV Output node can be used in both
material and world shader nodes.
Implemented by Lukas, with tweaks by Brecht.
Differential Revision: https://developer.blender.org/D4837
|
|
|
|
This patch adds a new Vertex Color node. The node also returns the alpha
of the vertex color layer as an output.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5767
|
|
CUDA is working correct without it now, and it's more efficient not to do this.
Ref D5363
|
|
The object color property is added as an additional output in
the Object Info node.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5554
|
|
The White Noise node hashes the input and returns a random number in the
range [0, 1]. The input can be a 1D, 2D, 3D, or a 4D vector.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5550
|
|
The partial disabling was causing issues with Clang and ASAN, and it seems we
don't need to restrict it to the kernel anymore now that we are no longer using
boost directly.
|
|
This is not supported, meshes do not exist in the BVH before displacement.
|
|
|
|
The refactoring of texture handles did not take into account that render
services are shared between multiple render session. Now the texture
to handle map is also shared between render sessions.
|
|
Not really noticeable for users, since the compiled code is the same,
but semantically this is incorrect.
|
|
These are the internal changes to Cycles, for Blender integration there are no
functional changes in this commit.
Images are converted to scene linear color space on file load, and on reading
from the OpenImageIO texture cache. 8-bit images are compressed with the sRGB
transfer function to avoid precision loss while keeping memory usages low. This
also means that for common cases of 8-bit sRGB images no conversion happens at
all on image loading.
Initial patch by Lukas, completed by Brecht.
Differential Revision: https://developer.blender.org/D3491
|
|
This adds our own OSL texture handle, that has info for OIIO textures or our
own custom texture types. A filename to handle hash map is used for lookups.
This is efficient because it happens at OSL compile time, because the optimizer
can figure out constant strings and replace them with texture handles.
|
|
|
|
|
|
This never really worked as it was supposed to. The main goal of this is to
turn noise from sampling tiny hairs into multiple layers of transparency that
do not need to be sampled stochastically. However the implementation of this
worked by randomly discarding hair intersections in BVH traversal, which
defeats the purpose.
If it ever comes back, it's best implemented outside the kernel as a preprocess
that changes hair radius before BVH building. This would also make it work with
Embree, where it's not supported now. But it's not so clear anymore that with
many AA samples and GPU rendering this feature is as helpful as it once was for
CPU raytracers with few AA samples.
The benefit of removing this feature is improved hair ray tracing performance,
tested on NVIDIA Titan Xp:
bmw27: +0.37%
classroom: +0.26%
fishy_cat: -7.36%
koro: -12.98%
pabellon: -0.12%
Differential Revision: https://developer.blender.org/D4532
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
