| Age | Commit message (Collapse) | Author |
|---|
|
Voxels are loaded directly from the OpenVDB grid. Rendering still only supports
dense grid, so memory usage is not great for sparse volumes, this is to be
addressed in the future.
Ref T73201
|
|
Rather than passing around void pointers, various Blender image sources now
subclass this. OIIO is also just another type of image loader.
Also fixes T67718: Cycles viewport render crash editing point density settings
|
|
This is a bit weak since it's not entirely clear where the boundary is, but
tested to build and pass tests on all platforms.
|
|
This sampling pattern is particularly suited to adaptive sampling, and will
be used for that upcoming feature.
Based on "Progressive Multi-Jittered Sample Sequences" by Per Christensen,
Andrew Kensler and Charlie Kilpatrick.
Ref D4686
|
|
|
|
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
|
|
The partial disabling was causing issues with Clang and ASAN, and it seems we
don't need to restrict it to the kernel anymore now that we are no longer using
boost directly.
|
|
This is the groundwork for supporting loading image textures with arbitrary
color spaces through OpenColorIO.
Initial patch by Lukas, completed by Brecht.
Differential Revision: https://developer.blender.org/D3491
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
Tested to work on Linux and macOS.
This will be enabled once all platforms are verified.
See D4684
|
|
|
|
This is only available through the API, mainly intended for render farms to
combine rendered multilayer EXR Files with different samples. The images are
currently expected to have the exact same render layers and passes, just with
different samples.
Variance passes are still simply a weighted average, ideally these should be
merged more intelligently.
Differential Revision: https://developer.blender.org/D4554
|
|
This adds a cycles.denoise_animation operator, which denoises an animation
sequence or individual file. Renders must be saved as multilayer EXR files
with denoising data passes.
By default file path and frame range come from the current scene, and EXR
files are denoised in-place. Alternatively, a different input and/or output
file path can be provided.
Denoising settings come from the current view layer. Renders can be denoised
again with different settings, as the original noisy image is preserved along
with other passes and metadata.
There is no user interface yet for this feature, that comes later.
Code by Lukas with modifications by Brecht. This feature was originally
developed for Tangent Animation, thanks for the support!
Differential Revision: https://developer.blender.org/D3889
|
|
This allows for extra output passes that encode automatic object and material masks
for the entire scene. It is an implementation of the Cryptomatte standard as
introduced by Psyop. A good future extension would be to add a manifest to the
export and to do plenty of testing to ensure that it is fully compatible with other
renderers and compositing programs that use Cryptomatte.
Internally, it adds the ability for Cycles to have several passes of the same type
that are distinguished by their name.
Differential Revision: https://developer.blender.org/D3538
|
|
Gathers information about object geometry and textures. Very basic at
this moment, but need to start somewhere.
Things which needs to be included still:
- "Runtime" information, like BVH. While it is not directly controllable
by artists, it's still important to know.
- Device array sizes. Again, not under artists control, but is added to
the overall size.
- Memory peak at different synchronization stages.
At this point it simply prints info to the stdout after F12 is done,
need better control over that too.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3566
|
|
around the volume.
We generate a tight mesh around the active voxels of the volume in order
to effectively skip empty space, and start volume ray marching as close
to interesting volume data as possible. See code comments for details on
how the mesh generation algorithm works.
This gives up to 2x speedups in some scenes.
Reviewed by: brecht, dingto
Reviewers: #cycles
Subscribers: lvxejay, jtheninja, brecht
Differential Revision: https://developer.blender.org/D3038
|
|
This patch changes the huge list of projects in visual studio into a nice tree matching the source folder structure. see D2823 for details.
Differential Revision: http://developer.blender.org/D2823
|
|
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
|
|
This adds support for ngons and attributes on subdivision meshes. Ngons are
needed for proper attribute interpolation as well as correct Catmull-Clark
subdivision. Several changes are made to achieve this:
- new primitive `SubdFace` added to `Mesh`
- 3 more textures are used to store info on patches from subd meshes
- Blender export uses loop interface instead of tessface for subd meshes
- `Attribute` class is updated with a simplified way to pass primitive counts
around and to support ngons.
- extra points for ngons are generated for O(1) attribute interpolation
- curves are temporally disabled on subd meshes to avoid various bugs with
implementation
- old unneeded code is removed from `subd/`
- various fixes and improvements
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2108
|
|
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D2089
|
|
Differential Revision: https://developer.blender.org/D2016
|
|
SubdMesh to Mesh
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D1915
|
|
|
|
Now we calculate color in range 800..12000 using an approximation a/x+bx+c for R and G and ((at + b)t + c)t + d) for B.
Max absolute error for RGB for non-lut function is less than 0.0001, which is enough to get the same 8 bit/channel color as for OSL with a noticeable performance difference.
However there is a slight visible difference between previous non-OSL implementation because of lookup table interpolation and offset-by-one mistake.
The previous implementation gave black color outside of soft range (t > 12000), now it gives the same color as for 12000.
Also blackbody node without input connected is being converted to value input at shader compile time.
Reviewers: dingto, sergey
Reviewed By: dingto
Subscribers: nutel, brecht, juicyfruit
Differential Revision: https://developer.blender.org/D1280
|
|
This changes were done in original commit of the standalone Cycles repository
and needed here for easier patch synchronization.
|
|
https://developer.blender.org/D643
Separates graphics context creation from window code in Ghost so that they can vary separately.
|
|
Expand Cycles to use the new baking API in Blender.
It works on the selected object, and the panel can be accessed in the Render panel (similar to where it is for the Blender Internal).
It bakes for the active texture of each material of the object. The active texture is currently defined as the active Image Texture node present in the material nodetree. If you don't want the baking to override an existent material, make sure the active Image Texture node is not connected to the nodetree. The active texture is also the texture shown in the viewport in the rendered mode.
Remember to save your images after the baking is complete.
Note: Bake currently only works in the CPU
Note: This is not supported by Cycles standalone because a lot of the work is done in Blender as part of the operator only, not the engine (Cycles).
Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Bake
Supported Passes:
-----------------
Data Passes
* Normal
* UV
* Diffuse/Glossy/Transmission/Subsurface/Emit Color
Light Passes
* AO
* Combined
* Shadow
* Diffuse/Glossy/Transmission/Subsurface/Emit Direct/Indirect
* Environment
Review: D421
Reviewed by: Campbell Barton, Brecht van Lommel, Sergey Sharybin, Thomas Dinge
Original design by Brecht van Lommel.
The entire commit history can be found on the branch: bake-cycles
|
|
|
|
* Replaced the Preetham model with the newer Hosek / Wilkie model:
"An Analytic Model for Full Spectral Sky-Dome Radiance" http://cgg.mff.cuni.cz/projects/SkylightModelling/
* We use the sample code data, which comes with the paper, but removed some unnecessary parts, we only need the xyz version.
* New "Albedo" UI paraemeter, to control the ground albedo (between 0 and 1).
* Works with SVM only atm (CPU and CUDA).
Example render:
http://www.pasteall.org/pic/show.php?id=57635
ToDo / Open Questions:
* OSL still uses the old model, will be done later. In the meantime it's useful to compare the two models this way.
* The new model needs a much weaker Strength value (0.01), otherwise it's white. Can this be fixed?
* Code cleanup.
|
|
* Replaced the Brute Force version with a nice lookup table, this speeds it up a lot.
Patch by Philipp Oeser (lichtwerk) with some cleanup and changes by myself. Thanks!
ToDo:
* Temperature values between 800 and 804 Kelvin are wrong in SVM, check on this.
|
|
* Remove unused film_response table code.
|
|
well as I would like, but it works, just add a subsurface scattering node and
you can use it like any other BSDF.
It is using fully raytraced sampling compatible with progressive rendering
and other more advanced rendering algorithms we might used in the future, and
it uses no extra memory so it's suitable for complex scenes.
Disadvantage is that it can be quite noisy and slow. Two limitations that will
be solved are that it does not work with bump mapping yet, and that the falloff
function used is a simple cubic function, it's not using the real BSSRDF
falloff function yet.
The node has a color input, along with a scattering radius for each RGB color
channel along with an overall scale factor for the radii.
There is also no GPU support yet, will test if I can get that working later.
Node Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Shaders#BSSRDF
Implementation notes:
http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles/Subsurface_Scattering
|
|
|
|
Patch [#33445] - Experimental Cycles Hair Rendering (CPU only)
This patch allows hair data to be exported to cycles and introduces a new line segment primitive to render with.
The UI appears under the particle tab and there is a new hair info node available.
It is only available under the experimental feature set and for cpu rendering.
|
|
- move object_iterators.c --> view3d_iterators. (ED_object.h had to include ED_view3d.h which isn't so nice)
- move projection functions from view3d_view.c --> view3d_project.c (view3d_view was becoming a mishmash of utility functions and operators).
- some some cmake includes as system-includes.
|
|
|
|
dont get warnings from system headers.
|
|
The particle data used by the Particle Info node was stored in cycles as a list in each object. This is a problem when the particle emitter mesh is hidden: Objects in cycles are only intended as instances of renderable meshes, so when hiding the emitter mesh the particle data doesn't get stored either. Also the particle data can potentially be copied to multiple instances of the same object, which is a waste of texture space.
The solution in this patch is to make a completely separate list of particle systems in the Cycles scene data. This way the particle data can be generated even when the emitter object itself is not visible.
|
|
Most of the changes are related to adding support for motion data throughout
the code. There's some code for actual camera/object motion blur raytracing
but it's unfinished (it badly slows down the raytracing kernel even when the
option is turned off), so that code it disabled still.
Motion vector export from Blender tries to avoid computing derived meshes
when the mesh does not have a deforming modifier, and it also won't store
motion vectors for every vertex if only the object or camera is moving.
|
|
|
|
seems they should be added but evidently work fine without.
|
|
|
|
* Add alpha pass output, to use set Transparent option in Film panel.
* Add Holdout closure (OSL terminology), this is like the Sky option in the
internal renderer, objects with this closure show the background / zero
alpha.
* Add option to use Gaussian instead of Box pixel filter in the UI.
* Remove camera response curves for now, they don't really belong here in
the pipeline, should be moved to compositor.
* Output full float values for rendering now, previously was only byte precision.
* Add a patch from Thomas to get a preview passes option, but still disabled
because it isn't quite working right yet.
* CUDA: don't compile shader graph evaluation inline.
* Convert tabs to spaces in python files.
|
|
* add some (disabled) test code for using OpenImageIO in imbuf
* link cycles, openimageio and boost into blender instead of a shared library
* some cmakefile changes to simplify the code and follow conventions better
* this may solve running cycles problems on windows XP, or give a different
and hopefully more useful error message
|
|
|
|
New build instructions for Ubuntu Linux in the wiki:
http://wiki.blender.org/index.php/Dev:2.5/Source/Cycles
|
|
modifications and build instructions will follow later.
Cycles uses code from some great open source projects, many thanks them:
* BVH building and traversal code from NVidia's "Understanding the Efficiency of Ray Traversal on GPUs":
http://code.google.com/p/understanding-the-efficiency-of-ray-traversal-on-gpus/
* Open Shading Language for a large part of the shading system:
http://code.google.com/p/openshadinglanguage/
* Blender for procedural textures and a few other nodes.
* Approximate Catmull Clark subdivision from NVidia Mesh tools:
http://code.google.com/p/nvidia-mesh-tools/
* Sobol direction vectors from:
http://web.maths.unsw.edu.au/~fkuo/sobol/
* Film response functions from:
http://www.cs.columbia.edu/CAVE/software/softlib/dorf.php
|
