| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
This is not yet fully supported by automatic volume bounds but works fine in
most cases that will have mostly matching bounds.
Ref T73201
|
|
There was too much image texture specific stuff in device_memory, and too
much code duplication between devices.
|
|
|
|
Rather than passing around void pointers, various Blender image sources now
subclass this. OIIO is also just another type of image loader.
Also fixes T67718: Cycles viewport render crash editing point density settings
|
|
|
|
This is legacy code from when we had a fixed number of textures.
|
|
|
|
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
|
|
|
|
This also replaces the Use Alpha setting. We now have these alpha modes:
* Straight: store RGB and alpha channels separately with alpha acting as a
mask, also known as unassociated alpha.
* Premultiplied: transparent RGB pixels are multiplied by the alpha channel.
The natural format for renders.
* Channel Packed: different images are packed in the RGB and alpha channels,
and they should not influence each other. Channel packing is commonly used
by game engines to save memory.
* None: ignore alpha channel from the file and make image fully opaque.
Cycles OSL does not correctly support Channel Packed and None yet, we are
missing fine control over the OpenImageIO texture cache to do that.
Fixes T53672
|
|
A better solution would be to not use the callback mechanism anymore for
cases like this where the dependency graph will free volume data, but
that would be a bigger refactor.
|
|
Not really noticeable for users, since the compiled code is the same,
but semantically this is incorrect.
|
|
It was crashing due to array out of bounds access. This is not a great fix,
but brings back behavior the same as before now. Perhaps images that failed
to load should be stored separately somewhere.
|
|
These are the internal changes to Cycles, for Blender integration there are no
functional changes in this commit.
Images are converted to scene linear color space on file load, and on reading
from the OpenImageIO texture cache. 8-bit images are compressed with the sRGB
transfer function to avoid precision loss while keeping memory usages low. This
also means that for common cases of 8-bit sRGB images no conversion happens at
all on image loading.
Initial patch by Lukas, completed by Brecht.
Differential Revision: https://developer.blender.org/D3491
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
3D image dimensions should be updated on the Cycles side before loading
the smoke data.
|
|
|
|
There are some changes in API of OpenImageIO, but those are quite
simple to keep working with older and newer library versions.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4064
|
|
|
|
It is supposed to be two spaces before comment stating which if
else/endif statements corresponds to. Was mainly violated in the
header guards.
|
|
|
|
Gathers information about object geometry and textures. Very basic at
this moment, but need to start somewhere.
Things which needs to be included still:
- "Runtime" information, like BVH. While it is not directly controllable
by artists, it's still important to know.
- Device array sizes. Again, not under artists control, but is added to
the overall size.
- Memory peak at different synchronization stages.
At this point it simply prints info to the stdout after F12 is done,
need better control over that too.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3566
|
|
|
|
There is no reason or justification to have helper functions as
class methods: they do not depend on anything in the class itself.
There are probably more cases like that.
|
|
|
|
Allows to catch enumerator values which are missing from being handled.
Also use `const char*`, no need to construct string just to throw it away.
|
|
|
|
|
|
|
|
sampling map
The automatic mode checks all Enviroment Texture nodes and picks the largest image's resolution.
If there are no Enviroment Textures, it just uses the old default.
Also, the sampling map now isn't limited to square shapes. The automatic detection uses the exact image size,
the manual UI option now halves the value to get the height.
A default aspect ratio of 2:1 makes sense since this is what most HDRIs use.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D3477
|
|
With copy-on-write we can no longer assumes the point density data is
available after Cycles synchronization with Blender data is done. So
force it to be loaded earlier, even if it's not great for interactivity.
|
|
around the volume.
We generate a tight mesh around the active voxels of the volume in order
to effectively skip empty space, and start volume ray marching as close
to interesting volume data as possible. See code comments for details on
how the mesh generation algorithm works.
This gives up to 2x speedups in some scenes.
Reviewed by: brecht, dingto
Reviewers: #cycles
Subscribers: lvxejay, jtheninja, brecht
Differential Revision: https://developer.blender.org/D3038
|
|
|
|
This should be the last Fermi removal commit, unless I missed something.
It's been a pleasure Fermi!
|
|
Fixes a few corner cases found while stress testing host mapped memory.
|
|
|
|
This reverts commit f2809ae0a671057caa1005e2b9cc91648c33dd1f.
|
|
Steps to reproduce:
- Create shader Image texture -> Diffuse BSDF -> Output. Do NOT select image yet!
- Start viewport render.
- Select image from the ID browser of Image Texture node.
Thing is: with the memory manager we always need to inform device that memory
was freed.
|
|
Image textures were being packed into a single buffer for OpenCL, which
limited the amount of memory available for images to the size of one
buffer (usually 4gb on AMD hardware). By packing textures into multiple
buffers that limit is removed, while simultaneously reducing the number
of buffers that need to be passed to each kernel.
Benchmarks were within 2%.
Fixes T51554.
Differential Revision: https://developer.blender.org/D2745
|
|
render.
|
|
The issue was caused by unlimited textures commit, root of the issue is that
displacement code updates some of the image slots directly, so it needs to
ensure device vectors are all proper size.
|
|
|
|
|
|
This patch allows for an unlimited number of textures in Cycles where the hardware allows. It replaces a number static arrays with dynamic arrays and changes the way the flat_slot indices are calculated. Eventually, I'd like to get to a point where there are only flat slots left and textures off all kinds are stored in a single array.
Note that the arrays in DeviceScene are changed from containing device_vector<T> objects to device_vector<T>* pointers. Ideally, I'd like to store objects, but dynamic resizing of a std:vector in pre-C++11 calls the copy constructor, which for a good reason is not implemented for device_vector. Once we require C++11 for Cycles builds, we can implement a move constructor for device_vector and store objects again.
The limits for CUDA Fermi hardware still apply.
Reviewers: tod_baudais, InsigMathK, dingto, #cycles
Reviewed By: dingto, #cycles
Subscribers: dingto, smellslikedonkey
Differential Revision: https://developer.blender.org/D2650
|
|
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
|
|
|
|
This is a way to avoid possible memory corruption when render threads works
in parallel with UI thread.
Not guarantees complete safe, but makes things easier to check anyway.
|
