| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
This is the first of a sequence of changes to support compiling Cycles kernels as MSL (Metal Shading Language) in preparation for a Metal GPU device implementation.
MSL requires that all pointer types be declared with explicit address space attributes (device, thread, etc...). There is already precedent for this with Cycles' address space macros (ccl_global, ccl_private, etc...), therefore the first step of MSL-enablement is to apply these consistently. Line-for-line this represents the largest change required to enable MSL. Applying this change first will simplify future patches as well as offering the emergent benefit of enhanced descriptiveness.
The vast majority of deltas in this patch fall into one of two cases:
- Ensuring ccl_private is specified for thread-local pointer types
- Ensuring ccl_global is specified for device-wide pointer types
Additionally, the ccl_addr_space qualifier can be removed. Prior to Cycles X, ccl_addr_space was used as a context-dependent address space qualifier, but now it is either redundant (e.g. in struct typedefs), or can be replaced by ccl_global in the case of pointer types. Associated function variants (e.g. lcg_step_float_addrspace) are also redundant.
In cases where address space qualifiers are chained with "const", this patch places the address space qualifier first. The rationale for this is that the choice of address space is likely to have the greater impact on runtime performance and overall architecture.
The final part of this patch is the addition of a metal/compat.h header. This is partially complete and will be extended in future patches, paving the way for the full Metal implementation.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D12864
|
|
|
|
NOTE: this feature is not ready for user testing, and not yet enabled in daily
builds. It is being merged now for easier collaboration on development.
HIP is a heterogenous compute interface allowing C++ code to be executed on
GPUs similar to CUDA. It is intended to bring back AMD GPU rendering support
on Windows and Linux.
https://github.com/ROCm-Developer-Tools/HIP.
As of the time of writing, it should compile and run on Linux with existing
HIP compilers and driver runtimes. Publicly available compilers and drivers
for Windows will come later.
See task T91571 for more details on the current status and work remaining
to be done.
Credits:
Sayak Biswas (AMD)
Arya Rafii (AMD)
Brian Savery (AMD)
Differential Revision: https://developer.blender.org/D12578
|
|
|
|
|
|
|
|
This includes much improved GPU rendering performance, viewport interactivity,
new shadow catcher, revamped sampling settings, subsurface scattering anisotropy,
new GPU volume sampling, improved PMJ sampling pattern, and more.
Some features have also been removed or changed, breaking backwards compatibility.
Including the removal of the OpenCL backend, for which alternatives are under
development.
Release notes and code docs:
https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Cycles
https://wiki.blender.org/wiki/Source/Render/Cycles
Credits:
* Sergey Sharybin
* Brecht Van Lommel
* Patrick Mours (OptiX backend)
* Christophe Hery (subsurface scattering anisotropy)
* William Leeson (PMJ sampling pattern)
* Alaska (various fixes and tweaks)
* Thomas Dinges (various fixes)
For the full commit history, see the cycles-x branch. This squashes together
all the changes since intermediate changes would often fail building or tests.
Ref T87839, T87837, T87836
Fixes T90734, T89353, T80267, T80267, T77185, T69800
|
|
|
|
Ideally can use assert() checks instead of suppressing the check entirely,
but for now just fix compilation error quickly.
|
|
Differential Revision: https://developer.blender.org/D11950
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Differential Revision: https://developer.blender.org/D11061
|
|
|
|
These were leftovers from an earlier way of indexing textures.
|
|
|
|
Differential Revision: https://developer.blender.org/D10958
|
|
|
|
Cycles, Eevee, OSL, Geo, Attribute
Based on outdated refract patch D6619 by @cubic_sloth
`refract` and `faceforward` are standard functions in GLSL, OSL and Godot shader languages.
Adding these functions provides Blender shader artists access to these standard functions.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10622
|
|
Before this change messages of ERROR and above were printed.
This change makes it so LOG(INFO), LOG(WARNING), LOG(ERROR)
and LOG(FATAL) will be printed to the console by default
(without --debug-libmv and --debug-cycles).
On a user level nothing is changed because neither INFO nor
WARNING severity are used in our codebase. For developers this
change allows to use LOG(INFO) to print relevant for debugging
information. Bering able to see WARNING messages is also nice,
since those are not related to debugging, but are about some
detected "bad" state.
After this change the LOG(INFO) is really treated as a printf.
Why not to use printf to begin with? Because it is often more
annoying to print non-scalar types. Why not to use cout? Just
a convenience, so that all type of logging is handled in the
same way. When one is familiar with Glog used in the area, it
is easy to use same utilities during development. Also, it is
easy to change LOG(INFO) to VLOG(2) when development is done
and one wants to keep the log print but make it only appear
when using special verbosity flags.
The initial reason why default severity was set to maximum
possible value is because of misuse of VLOG with verbosity
level 0, which is the same as LOG(INFO). This is also why
back in the days --debug-libmv was introduced.
Now there is some redundancy between --debug-libmv, --debug-cyles
and --verbose, but changes in their meaning will cause user
level side effects.
Differential Revision: https://developer.blender.org/D10513
|
|
|
|
Function __bsf was in util/util_simd.h twice
problem located by @EAW on chat.
|
|
Based on patch contributed by Apple and Stefan Werner.
Ref D8237, T78710
|
|
Ref D8237, T78710
|
|
* Add processor independent fallbacks
* Use uint32_t and uint64_t types
* Remove unused functions
* Better comments and less indentation
Ref D8237, T78710
|
|
|
|
This required using a fork of Embree, newer LLVM version, unreleased ISPC
version and sse2neon directly from Git. Hopefully over time all the required
changes end up in official releases. For now we deviate from other platforms.
Based on contributions by Apple and Stefan Werner.
Ref D9527, D8237, T78710
|
|
Contributed by Apple
Ref D9527, T78710
|
|
* USD and OpenVDB headers use deprecated TBB headers, suppress all deprecation
warnings there since we have no control over them.
* For our own TBB includes, use the individual headers rather than the tbb.h that
includes everything to avoid warnings, rather than suppressing all.
This is in anticipation of the TBB 2020 upgrade in D10359. Ref D10361.
|
|
|
|
|
|
* tbb::blocked_range moved to a different namespace and since the fix is
non-trivial, remove some unused code that used this.
* Task group priorities are no longer supported. It's unclear if they are
useful at all right now and even set correctly, for now all tasks are equal
priority with TBB 2021.
|
|
This optimizes device updates (during user edits or frame changes in
the viewport) by avoiding unnecessary computations. To achieve this,
we use a combination of the sockets' update flags as well as some new
flags passed to the various managers when tagging for an update to tell
exactly what the tagging is for (e.g. shader was modified, object was
removed, etc.).
Besides avoiding recomputations, we also avoid resending to the devices
unmodified data arrays, thus reducing bandwidth usage. For OptiX and
Embree, BVH packing was also multithreaded.
The performance improvements may vary depending on the used device (CPU
or GPU), and the content of the scene. Simple scenes (e.g. with no adaptive
subdivision or volumes) rendered using OptiX will benefit from this work
the most.
On average, for a variety of animated scenes, this gives a 3x speedup.
Reviewed By: #cycles, brecht
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D9555
|
|
task_group::is_canceling() was removed.
|
|
Volumes using tricubic sampling were producing different results with NanoVDB compared
to dense textures. This fixes that by using the same tricubic sampling algorithm in both
cases. It also fixes some remaining offset issues and some minor things that broke OpenCL
kernel compilation on NVIDIA.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9491
|
|
This encapsulates Node socket members behind a set of specific methods;
as such it is no longer possible to directly access Node class members
from exporters and parts of Cycles.
The methods are defined via the NODE_SOCKET_API macros in `graph/
node.h`, and are for getting or setting a specific socket's value, as
well as querying or modifying the state of its update flag.
The setters will check whether the value has changed and tag the socket
as modified appropriately. This will let us know how a Node has changed
and what to update, which is the first concrete step toward a more
granular scene update system.
Since the setters will tag the Node sockets as modified when passed
different data, this patch also removes the various modified methods
on Nodes in favor of Node::is_modified which checks the sockets'
update flags status.
Reviewed By: brecht
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D8544
|
|
This reverts commit 527f8b32b32187f754e5b176db6377736f9cb8ff. It is causing
motion blur test failures and crashes in some renders, reverting until this is
fixed.
|
|
This encapsulates Node socket members behind a set of specific methods;
as such it is no longer possible to directly access Node class members
from exporters and parts of Cycles.
The methods are defined via the NODE_SOCKET_API macros in `graph/
node.h`, and are for getting or setting a specific socket's value, as
well as querying or modifying the state of its update flag.
The setters will check whether the value has changed and tag the socket
as modified appropriately. This will let us know how a Node has changed
and what to update, which is the first concrete step toward a more
granular scene update system.
Since the setters will tag the Node sockets as modified when passed
different data, this patch also removes the various `modified` methods
on Nodes in favor of `Node::is_modified` which checks the sockets'
update flags status.
Reviewed By: brecht
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D8544
|
|
|
