| Age | Commit message (Collapse) | Author |
|---|
|
The issue was caused bu the optimization in surface attributes for cases when
there's only a volume shader used. Some attributes doesn't make sense in that
case and were skipped from calculation.
However, it is possible that kernel would still try to access them (because of
the shader setup etc). Prevented an infinite loop in the kernel now, which
should not have much affect on regular renders.
|
|
It is possible that ray distance will be zero which would make intersection
refinement return NaN as the refined position which would later lead to all
sort of mathematical issues.
Don't think there are ways to improve intersection accuracy for such rays
so just return original intersection coordinate.
This should fix T43475.
TODO: Need to look into possible issues in Ashikhmin BSDF which might return
zero-length reflected/transmitted ray?
|
|
This way we save 3 bytes per BVH node while building BVH, which overall
gives 100Mb memory save when preparing Frank for render.
It's not really much comparing to overall memory usage (which is 11Gb
during scene preparation here) but still doesn't harm to have solved.
|
|
Precision of the fast functions seems to be enough in there and
since the code was heavily using inverse trigonometric functions
this change gives few percent speedup on Victor's hair.
From the tests files from ctests storage doesn't have any meaningful
difference, hair on Victor is all below 4% absolute error and only
few pixels are exceeding 1% absolute difference.
In any case, let it be as it is currently so it allows us to have
fast math file in sources for it's further evaluation and possible
usage in other areas as well.
|
|
It is based on fmath.h from OIIO and could be used to give some speedup
in areas where absolute accuracy is not so critical.
|
|
BSDF sampler function shouldn't give labels it's not intended to do.
That said reflection shouldn't give transmission ray and transmission
give reflection ray.
Added an assert in the transmission sampling but reflection still
needs some investigation because even after recent fixes the check
for projection onto the reflected ray could give both positive and
negative values.
It shouldn't have any affect on renders just makes internal logic
consistent and unleashes an issue to be investigate further.
|
|
Hair BSDF did not have proper behavior because of non-normalized
tangent direction (which it expected to be normalized).This lead
to wrong labels being returned by the hair BSDF samplers.
|
|
This was intended to be in the original patch of texco copy from object.
|
|
also remove empty class parenthesis
|
|
* create() and destroy() are deprecated since OSL 1.5, use regular constructors / destructors.
|
|
Reported and nailed down by Michale (MeshLogic).
The code that fixes this was commented out, but Brecht gave the go ahead to use it even if it is not the real solution
|
|
The issue was caused by the whole viewplane used for mapping calculation
which would for sure lead to differences between final camera render and
viewport render from the camera view.
This commit makes it so window texture mapping is the same as final render
when viewing from the camera in viewport render.
It's not totally clear what's the right thing to do when viewport is not
in the camera view mode and that part is left unchanged.
|
|
This is the same as blender internal's texture mapping from another object,
so this way it's possible to control texture space of one object by another.
Quite straightforward change apart from the workaround for the stupidness of
the dependency graph. Now shader has flag telling that it depends on object
transform. This is the simplest way to know which shaders needs to be tagged
for update when object changes. This might give some false-positive tags now
but reducing them should not be priority for Cycles and rather be a priority
to bring new dependency graph.
Also GLSL preview does not support using other object for mapping.
This is actually correct for BI shading as well and to be addressed as
a part of general GLSL viewport improvements since it's not really clear
how to support this in GLSL.
Reviewers: brecht, juicyfruit
Subscribers: eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1021
|
|
This commit makes it so blackbody and beckmann lookup tables are stored on CPU
after being generated and then only being copied to the device if needed.
This solves lag of viewport update when tweaking shader tree by using 266KB of
CPU memory.
|
|
Not sure why this was not visible previously, but the change is
logical anyway.
|
|
When doing BVH leaf node split we can't rely on leaf size limit from
BVH parameters in case there's spatial split enabled.
This commit basically reverts previous optimization change here which
used stack-allocated memory and uses heap-allocated vector now.
It's possible to boost this code up again by using own allocator.
|
|
Handy for troubleshooting.
|
|
Root of the issue goes to the fact that since the very beginning Cycles was
using ZYX euler rotation for mapping shader node but blender was always
using XYZ euler rotation.
This commit switches Cycles to use XYZ euler order and adds versioning code
to preserve backward compatibility.
There was no really nice solution here because either we're ending up with
versioning code or we'll need to deal with all sort of exceptions from blender
side in order to support ZYX order for the mapping node. The latest one is
also creepy from the other render engines points of view -- that might break
compatibility with existing bindings or introduce some extra headache for them
in the future.
This could also become a PITA for us with need of supporting all sort of weird
and wonderful exceptions in the refactored viewport project.
NOTE: This commit breaks forward compatibility, meaning opening new files in
older blender might not give proper result if Mapping node was used.
Also, libraries are to be re-saved separately from the scene file, otherwise
versioning code for them wouldn't run if scene file was re-saved with new
version of blender.
Reviewers: brecht, juicyfruit, campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D973
|
|
Differential Revision: https://developer.blender.org/D1018
|
|
This way Cycles finally becomes feature-full on image projections
compared to Blender Internal and Gooseberry Project Team could
finally finish the movie.
|
|
|
|
* If a Background node is set to a black color or zero strength,
it now gets removed from the shader graph.
* In case the graph is empty (no background node), the kernel will skip
evaluating it and save some rendertime. This can help quite a bit in scenes,
where the majority of the image consists of a black background.
Example: http://www.pasteall.org/pic/show.php?id=82650
In this case the render is ~16% faster.
Differential Revision: https://developer.blender.org/D972
|
|
|
|
Issue seems to be caused by not totally proper pdf and eval values for this
closure. Changed it so they reflect to ggx/beckmann reflection with roughness
set to 0, which is effectively the same as the sharp reflection.
|
|
Issue was, when requesting (building) lnors for a mesh that has
autosmooth disabled, one would expect to simply get vnors as lnors.
Until now, it wasn't the case, which was bad e.g. for normal projections
of loops in recent remap code (projecting along split loop normals
when you would expect projection along vertex normals...).
Also, removed the 'angle' parameter from RNA's `mesh.calc_normals_split`.
This should *always* use mesh settings (both autosmooth and smoothresh),
otherwise once again we'd get inconsistencies in some cases.
Will update fbx and obj addons too.
|
|
The check should also become aware of the fact were using clipping plane
instead of clipping sphere now.
|
|
Issue was caused by wrong order of scene device update, which could
lead to missing object flags in shader kernel.
This patch solves a bit more than that making sure objects flags are
always properly updated, so adding/removing volume BSDF will properly
reflect on viewport where camera might become being in volume and so.
|
|
Also add missing render_time initialization in progress.
|
|
Also adds safe-area presets.
D325 by Diego Gangl with own edits.
|
|
They went back from string_view to string for compiler options.
Still having linking errors here, but maybe others will be more lucky to fully
compiler blender with new OSL.
|
|
|
|
|
|
|
|
threads
This commit basically makes it so statistics print from different BVH trees are not
being interleaved with each other. Glog ensures this when debug print is done as a
single put to stream operator.
|
|
|
|
|
|
Since leaf node gets split further into per-primitive type leaves old check
for number of curves became a bit ridiculous -- it might lead to two leaf nodes
each of which would contain only one curve primitive (one motion curve and one
regular curve).
This lead to quite dramatic slowdown for Victor model -- around 40%, which is
totally unacceptable.
This commit is aimed to prevent such situation and from quick render test it
seems victor is now back to normal render time. Further testing is needed tho.
There are also other ideas about splitting the node, will need to look into
them next.
|
|
|
|
Just wrong constant used, names are indeed too close to each other.
|
|
|
|
We use upper case for properties.
|
|
This patch adds the option to set minimum/maximum latitude/longitude values for
the equirectangular panorama camera in Cycles, as discussed in T34400.
The separate functions in kernel_projection.h are needed because the regular
ones are also used as helper functions for environment map sampling.
Reviewers: #cycles, sergey
Reviewed By: #cycles, sergey
Subscribers: dingto, sergey, brecht
Differential Revision: https://developer.blender.org/D960
|
|
This patch makes Cycles ignore the time spent in BVH construction etc. when
estimating the remaining time. Considering that the remaining time is calculated
based on the average time per tile so far, as far as I understand it makes no
sense to include the preprocessing time.
Reviewers: sergey, #cycles
Reviewed By: sergey, #cycles
Subscribers: sergey
Projects: #cycles
Differential Revision: https://developer.blender.org/D895
|
|
There seems to be inconsistency in flags checks in Cycles kernel. In the interface
glossy means "Glossy Reflection" and it is properly taken into account when doing
visibility check in BVH traversal.
The check in indirect background/light emission was treating this flags as "any of
glossy reflection or transmission" which is kind of weird.
Made it so emission code follows ray visibility assumptions in other parts of the
kernel now.
|
|
Basically the title tells it all, now Cycles uses proper clipping plane,
matching other render engines.
|
|
|
|
Really stupid issue caused by typo in bitfield bit lead to bit conflict,
Not sure how it was done, could be some bad merge conflict resolve in the
original commit or just pure man stupidnes.
This is a nice example when having set of small test render scenes hooked
to the ctest would really help.
It's probably not that stopper issue (even tho still quite bad) since it
was made 2 months ago. But if we ever do 'a' this time it's a nice change
to include.
|
|
It's apparently not nice to access 0th element of zero-size vector in C++.
|
|
Overview this in one of the previous BVH commits.
|
|
This way we'll notice that leaf splitting didn't happen correct pretty easily
in debug builds.
There'll be absolutely no impact on release builds.
|
