| Age | Commit message (Collapse) | Author |
|---|
|
|
|
DDS files coming through OIIO needed a similar treatment as TGA in
T99565; just for DDS OIIO just never set the "unassociated alpha"
attribute. Fixes T101850.
Reviewed By: Brecht Van Lommel
Differential Revision: https://developer.blender.org/D16270
|
|
Thanks to Lukas for tracking down the cause in OIIO.
|
|
|
|
This was a floating point precision issue - or, to be more precise,
an issue with how Cycles split floats into the integer and fractional
parts for Perlin noise.
For coordinates below -2^24, the integer could be wrong, leading to
the fractional part being outside of 0-1 range, which breaks all sorts
of other things. 2^24 sounds like a lot, but due to how the detail
octaves work, it's not that hard to reach when combined with a large
scale.
Since this code is originally based on OSL, I checked if they changed
it in the meantime, and sure enough, there's a fix for it:
https://github.com/OpenImageIO/oiio/commit/5c9dc68391e9
So, this basically just ports over that change to Cycles.
The original code mentions being faster, but as pointed out in the
linked commit, the performance impact is actually irrelevant.
I also checked in a simple scene with eight Noise textures at
detail 15 (with >90% of render time being spent on the noise), and
the render time went from 13.06sec to 13.05sec. So, yeah, no issue.
|
|
Missing from recent commit to change the default in a6db2c2.
|
|
Test kernel will now test functionalities related to kernel execution
with USM memory allocations instead of with SYCL buffers and accessors
as these aren't currently used in the backend.
|
|
This change removes CMake code for automatic calculation of the number
of offline device compiler instances, to hand over control to developers
instead as it incurs a rather large memory usage with around 8GB per
instance at peak.
Use SYCL_OFFLINE_COMPILER_PARALLEL_JOBS CMake variable to configure it.
|
|
Some unused parameters were left after changing the oneAPI device code
to be a direclty linked shared library.
|
|
Currently Cycles uses zero as a default radius when no "radius"
attribute exists. This is more confusing than helpful. Instead,
use the same default radius as EEVEE and Workbench.
|
|
This patch enables MNEE on macOS >= 13. There was an inefficiency in the calculation of spill requirements, fixed as of macOS 13. This patch also adds a temporary inlining workaround for a Metal compiler bug which causes `mnee_compute_constraint_derivatives` to behave incorrectly.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16235
|
|
The issue here was that PathTraceWork was set up before checking if
any error occurred, and it didn't account for the dummy device so
it called a non-implemented function.
This fix therefore avoids creating PathTraceWork for dummy devices
and checks for device creation errors earlier in the process.
|
|
JIT compilation of oneAPI kernels now happens during load stage
and proper message gets shown in the GUI during compilation.
Also, this implementation skips kernels that aren't needed for
the used scene, reducing overall (re)compilation time.
|
|
|
|
OSL (like Cycles) has no internal boolean type, instead an integer
input can be flagged to be shown as a boolean in the UI.
Cycles reacts to this by creating a boolean socket on the Blender
side, but as a result incorrectly called the boolean overload of the
set function even though the internal type is an integer.
There's another unrelated crash in the GPU viewport shader code that
appears to apply to every OSL node that outputs a shader, and the file
in T101702 triggers both, so this is only a partial fix for the report.
|
|
The attribute node already allows accessing attributes associated
with objects and meshes, which allows changing the behavior of the
same material between different objects or instances. The same idea
can be extended to an even more global level of layers and scenes.
Currently view layers provide an option to replace all materials
with a different one. However, since the same material will be applied
to all objects in the layer, varying the behavior between layers while
preserving distinct materials requires duplicating objects.
Providing access to properties of layers and scenes via the attribute
node enables making materials with built-in switches or settings that
can be controlled globally at the view layer level. This is probably
most useful for complex NPR shading and compositing. Like with objects,
the node can also access built-in scene properties, like render resolution
or FOV of the active camera. Lookup is also attempted in World, similar
to how the Object mode checks the Mesh datablock.
In Cycles this mode is implemented by replacing the attribute node with
the attribute value during sync, allowing constant folding to take the
values into account. This means however that materials that use this
feature have to be re-synced upon any changes to scene, world or camera.
The Eevee version uses a new uniform buffer containing a sorted array
mapping name hashes to values, with binary search lookup. The array
is limited to 512 entries, which is effectively limitless even
considering it is shared by all materials in the scene; it is also
just 16KB of memory so no point trying to optimize further.
The buffer has to be rebuilt when new attributes are detected in a
material, so the draw engine keeps a table of recently seen attribute
names to minimize the chance of extra rebuilds mid-draw.
Differential Revision: https://developer.blender.org/D15941
|
|
Contributed by Alaska.
Differential Revision: https://developer.blender.org/D16166
|
|
Flags were not properly passed to the
compiler.
|
|
It fixes SYCL runtime issues in Debug builds that were due to mixing
Release and Debug MSVC runtimes.
This commit also removes specific handling of dpcpp compiler executable
to simplify the CMake implementation. Using it like clang++ works and
clang++ executable is also available from Intel oneAPI DPC++ compiler in
case it doesn't.
|
|
This is a minimal set of changes, allowing a lot of cleanup that can
happen afterward as it allows sycl method and objects to be used outside
of kernel.cpp.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D15397
|
|
|
|
Changing volume parameters during rendering could cause a crash
when guiding was enabled. It was due to an unintialized state paramter
at the beginning of the path tracing process.
In addition guiding is disabled when dealing with almost delta volumes
(i.e., g close to 1.0 or -1.0).
|
|
|
|
To avoid issues with install_deps. If we more generally switch to using
CMake configs then perhaps this code can be deduplicated again or at
least simplified.
|
|
New thresholds give a few percent improvement in average.
|
|
This change speeds up the compilation at the cost of higher memory usage.
CMake implementation checks the amount of available memory to spawn a
reasonable number of parallel compiler jobs.
|
|
Previously it would bake viewed from above the surface. The new option can be
useful when the baked result is meant to be viewed from a fixed viewpoint or
with limited camera motion.
Some effort is made to give a continuous reflection on parts of the surface
invisible to the camera, but this is necessarily only a rough approximation.
Differential Revision: https://developer.blender.org/D15921
|
|
We expect this to always happen.
Ref T100891
|
|
Also replace "dm" for evaluated mesh in some comments.
|
|
Currently lookup of Object and Instancer attributes is completely
duplicated between Cycles, Eevee and Eevee Next. This is bad design,
so this patch aims to deduplicate it by introducing a common API
in blenkernel.
In case of Cycles this requires certain hacks, but according to
Brecht it is planned to be rewritten later for more direct access
to internal Blender data anyway.
Differential Revision: https://developer.blender.org/D16117
|
|
|
|
Also add missing task ID.
|
|
|
|
When verbose level 4 is enabled, Blender prints kernel performance
data for Cycles on GPU backends (except Metal that doesn't use
debug_enqueue_* methods) for groups of kernels.
These changes introduce a new CYCLES_DEBUG_PER_KERNEL_PERFORMANCE
environment variable to allow getting timings for each kernels
separately and not grouped with others. This is done by adding
explicit synchronization after each kernel execution.
Differential Revision: https://developer.blender.org/D15971
|
|
|
|
Debug and Release libs are different libs on
Windows and will give linker errors when you
try to mix and match them.
This changes retrieves both libs and fills the
OPENPGL_LIBRARIES variable appropriately resolving
the linker error.
|
|
This patch optimises the Metal inlining policy. It gives a small speedup (2-3% on M1 Max) with no notable compilation slowdown vs what is already in master. Previously noted compilation slowdowns (as reported in T100102) were caused by forcing inlining for `ccl_device`, but we get better rendering perf by relying on compiler heuristics in these cases.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16081
|
|
An bug with binary archives was fixed in macOS 13.0 which stops some spurious kernel recompilations. In older macOS versions, falling back on the system shader cache will prevent recompilations in most instances (this is the same behaviour as in Blender 3.1.x and 3.2.x).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16082
|
|
This adds path guiding features into Cycles by integrating Intel's Open Path
Guiding Library. It can be enabled in the Sampling > Path Guiding panel in the
render properties.
This feature helps reduce noise in scenes where finding a path to light is
difficult for regular path tracing.
The current implementation supports guiding directional sampling decisions on
surfaces, when the material contains a least one diffuse component, and in
volumes with isotropic and anisotropic Henyey-Greenstein phase functions.
On surfaces, the guided sampling decision is proportional to the product of
the incident radiance and the normal-oriented cosine lobe and in volumes it
is proportional to the product of the incident radiance and the phase function.
The incident radiance field of a scene is learned and updated during rendering
after each per-frame rendering iteration/progression.
At the moment, path guiding is only supported by the CPU backend. Support for
GPU backends will be added in future versions of OpenPGL.
Ref T92571
Differential Revision: https://developer.blender.org/D15286
|
|
Simplifies code overall to do it inside the eval function, most of the BSDFs
already compute the dot product.
The refactoring in bsdf_principled_hair_eval() was needed to avoid a HIP
compiler bug. Cause is unclear, just changing the implementation enough
is meant to sidestep it.
Ref T92571, D15286
|
|
* Return roughness and IOR for BSDF sampling
* Add functions to query IOR and label for given BSDF
* Default IOR to 1.0 instead of 0.0 for BSDFs that don't use it
* Ensure pdf >= 0.0 in case of numerical precision issues
Ref T92571, D15286
|
|
|
|
Windows drivers 101.3430 fix an important GUI-related crash and it's
best to prevent users from running into it.
Linux drivers weren't affected but still had relevant gpu binary
compatibility fixes, so it makes sense to keep the min-supported version
aligned across OSes.
|
|
Some changes missed from f68cfd6bb078482c4a779a6e26a56e2734edb5b8.
|
|
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
|
|
This is already the case for most CMake usage.
Although some find modules are an exception to this, as they were
originally maintained externally they use some different conventions.
Also corrected bad indentation in: intern/cycles/CMakeLists.txt
|
|
Now explicitly including math.h first before #defining funcitons.
This avoids undefined behavior and improves compatibility with
different SYCL compilers and backends.
|
|
Differential Revision: https://developer.blender.org/D16027
|
|
This doesn't work with path guiding, and likely other features.
|
|
* Windows build fixes
* Workaround for Hydra + OpenColorIO link issue
* Bump version
|
