| Age | Commit message (Collapse) | Author |
|---|
|
For Windows 8.1 and X11 (Linux, BSD) now use the DPI specified by the operating
system, which previously only worked on macOS. For Windows this is handled per
monitor, for X11 this is based on Xft.dpi or xrandr --dpi. This should result
in appropriate font and button sizes by default in most cases.
The UI has been simplified to a single UI Scale factor relative to the automatic
DPI, instead of two DPI and Virtual Pixel Size settings. There is forward and
backwards compatibility for existing user preferences.
Reviewed By: brecht, LazyDodo
Differential Revision: https://developer.blender.org/D2539
|
|
When WITH_INPUT_NDOF is disabled, 3D mouse handling code is removed
from:
- GHOST (was mostly done, finished the job)
- window manager
- various editors
- RNA
- keymaps
The input tab of user prefs does not show 3D mouse settings. Key map
editor does not show NDOF mappings.
DNA does not change.
On my Mac the compiled binary is 42KB smaller after this change. It
runs fine WITH_INPUT_NDOF on or off.
|
|
This patch addresses the following issues in bf_intern_ghost
```
Warning C4312 'type cast': conversion from 'GHOST_TEmbedderWindowID' to 'HWND' of greater size bf_intern_ghost K:\BlenderGit\blender\intern\ghost\intern\GHOST_WindowWin32.cpp 179
Warning C4312 'type cast': conversion from 'GHOST_TEmbedderWindowID' to 'HWND' of greater size bf_intern_ghost K:\BlenderGit\blender\intern\ghost\intern\GHOST_WindowWin32.cpp 198
```
GHOST_TEmbedderWindowID is defined as long, handles are however of pointer size,
so this should have been an issue when we moved to 64 bits, guess we got lucky.
fixed by turning GHOST_TEmbedderWindowID from long into void*
```
Warning C4302 'reinterpret_cast': truncation from 'HKL' to 'LANGID' bf_intern_ghost K:\BlenderGit\blender\intern\ghost\intern\GHOST_ImeWin32.cpp 67
```
reinterpret_cast emits warnings on truncation, LOWORD does the job just
as well with no warnings.
```
Warning C4838 conversion from 'int' to 'DWORD' requires a narrowing conversion bf_intern_ghost K:\BlenderGit\blender\intern\ghost\intern\GHOST_ContextWGL.cpp 734
Warning C4838 conversion from 'int' to 'BYTE' requires a narrowing conversion bf_intern_ghost K:\BlenderGit\blender\intern\ghost\intern\GHOST_ContextWGL.cpp 734
```
Weird warning, it does a really bad job at telling you what parameter is
causing the warning , tuns out there's a bunch of parameters that cause it
but it still only yields a single warning, the problem is that every
(somevar ? a : b) construct results in an integer type. which needs to be
properly cast to get rid of the warning.
```
Warning C4996 'GetVersionExA': was declared deprecated bf_intern_ghost K:\BlenderGit\blender\intern\ghost\intern\GHOST_WindowWin32.cpp 105
Warning C4996 'GetVersionExA': was declared deprecated bf_intern_ghost K:\BlenderGit\blender\intern\ghost\intern\GHOST_WindowWin32.cpp 107
```
The warning was clear, the code not as much. The version check in place
here is quite convoluted and could be replaced by including VersionHelpers.h
and calling IsWindows7OrGreater, However, CreateInstance will just return NULL
in m_Bar if the interface is not supported, so the whole check is useless.
This however did require that the CreateInstance call actually asked for
ITaskbarList3 and not ITaskBarlist . (You're not really allowed to assign
different interface types to each-other, a roundtrip through QueryInterface
is required there, we were violating spec here by asking for ITaskBarlist and
storing it in ITaskbarList3* )
Reviewers: sergey
Reviewed By: sergey
Subscribers: sergey
Differential Revision: https://developer.blender.org/D2094
|
|
A new option '-a' can be passed to the blenderplayer. It forces the
framebuffer to have an alpha channel.
This can be used in VideoTexture to return a image with alpha channel
with ImageViewport (provided alpha is set to True on the ImageViewport
object and that the background color alpha channel is 0, which is the
default).
Without the -a option, the frame buffer has no alpha channel and
ImageViewport always returns an opaque image, no matter what.
In Linux, the player window will be rendered transparently over
the desktop.
In Windows, the player window is still rendered opaque because
transparency of the window is only possible using the 'compositing'
functions of Windows. The code is there but not enabled (look for
WIN32_COMPOSITING) because 1) it doesn't work so well 2) it requires
a DLL that is only available on Vista and up.
give precedence to AA over Swap copy:
Certain GPU (intel) will not allow MSAA together with swap copy.
Previously, swap copy had priority over MSAA: fewer AA samples would be
chosen if it was the condition to get swap copy. This patch reverse the
logic: swap copy will be abandonned if another swap method (undefined or
exchange) will provide the number of AA samples requested. If no AA
samples is requested, swap copy still has the priority of course.
|
|
Many keyboard layouts (italian, spanish, german...) have direct access to '+' key on main
keyboard area (not the numpad one), ans x11 has own define for this key, so use it instead
of generating an unkown key event.
Note that we most likely have much more missing 'specific' keycodes for non-US keyboard layout,
but think since we already had a 'minus' keyevent, supporting 'plus' one is totally consistent.
And we had a spare space in our defined values just for it even!
This keyevent is only supported/generated by x11 and cocoa Ghost backends for now,
neither SDL nor win32 seem to have matching key events...
|
|
messagebox.
|
|
option.
This makes sense, since contexts get created at runtime, there is little
reason to require recompilation for this.
Only works on linux currently, will be doing more OSs later
|
|
|
|
|
|
OpenGL is detected:
Hoping to decrease the frequency of by far one of the most frequent bug
reports by windows users.
There is some reorganization of the GHOST API to allow easy addition of
further OpenGL options in the future. The change is not propagated too
deep to keep the size of the patch managable. We might reorganize things
here later.
For OpenGL we do two checks here:
One is a combination of GDI generic renderer or vendor microsoft
corporation and OpenGL version 1.1. This means the system does not
use GPU acceleration at all. We warn user to install a graphics
driver and of cases where this might happen (remote connection, using
blender through virtual machine)
The other one just checks if OpenGL version is less than 1.4 (we can
easily change that in the future of course) and warns that it is
deprecated.
Both cases will still let blender startup correctly but users should now
have a clear idea of the system being unsupported.
A user preference flag is provided to turn the warning off.
Now stop posting those bug reports without installing a driver first -
please?
|
|
Original patch by @random (D765) with some minor work done by @campbell
and me.
At this place, I'd like call out a number of people who were involved and
deserve a big "Thank you!":
* At the first place @randon who developed and submitted the patch
* The Blendercn community which helped a lot with testing - espacially
* @yuzukyo, @leon_cheung and @kjym3
* @campbellbarton, @mont29 and @sergey for their help and advises during
* review
* @ton who realized the importance of this early on and asked me for
* reviewing
We are still not finished, as this is only the first part of the
implementaion, but there's more to come!
|
|
Patch by Marcus von Appen
Note: this patch makes ISMOUSE accept INBETWEEN_MOUSEMOVE as a mouse
event where before it didnt.
|
|
OK - so you have this nice crisp screen, and still you want to add extra
monitors to the laptop! That means Blender should switch back and forth to HiDPI
modes, when you move a window to another monitor.
This code makes the pixelsize scale factor a window property, and handles
an event when a window moves to another monitor. It then changes the
native pixelsize nicely and refreshes entire UI.
You can also have one Blender window on high, and other on low resolution.
Stretching a Blender window from 1 monitor to the other works too, but that
is Apple magic handling it.
|
|
|
|
|
|
|
|
allocated and never freed.
|
|
|
|
|
|
without the underscores these clogged up the namespace for autocompleation which was annoying.
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
between CFLAGS/CPPFLAGS/CCFLAGS/CXXFLAGS, devs would set multiple to be on the safe side.
- defines go in CPPFLAGS
- C & C++ flags go in CCFLAGS
- CFLAGS / CXXFLAGS are C OR C++ only.
also commented intended ghost unicode/ascii usage.
|
|
- currently X11 only, depends on Xinput (but should not break other os's).
- ghost stores utf8 buffer, copies to wmEvent's
- UI text input is currently the only area that uses this - not console or text editor.
- no rna access yet.
|
|
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender .
|
|
|
|
static function.
|
|
|
|
|
|
|
|
|
|
available on many keyboards these days, so that they can be used for
animation playback (giving more options over alt-a and alt-a ad-
infinitum).
Currently, this is Windows only as I don't have a Linux/Mac system to
test on (it should compile with both mingw and msvc, at least using
scons). Maintainers for those systems can probably easily add this in
once they find out the relevant mappings for those systems.
|
|
Thanks Damien Plisson for contributing the Carbon and Cocoa implementation
|
|
|
|
- fixed bug in paste material, exposed by stricter warnings.
- removed/renamed various shadowed vars.
- removed BGE lamp.colour, only allow lamp.color attribute.
|
|
internally it was mixed.
|
|
Reported by Andy Braham.
Handle VK_LWIN and VK_RWIN (The infamous Windows keys). Note, these are not separate, so handled as one command key.
|
|
events (incomplete! Mac-only for now). Grease pencil works better with pen.
|
|
|
|
|
|
|
|
When the user double-clicks on a document file in the Finder, OSX doesn't simply give the filename as a command-line argument when calling Blender, as it is done in other OSes.
Instead, it launches the app if needed, and then sends an "openFile" event.
The user can also open a document file by dropping its icon on the app dock icon. But as this is not real Drag'n'drop, I've renamed the Ghost event to a less confusing "GHOST_kEventOpenMainFile" name.
DND Ghost wiki page updated : http://wiki.blender.org/index.php/BlenderDev/Blender2.5/DragnDrop
|
|
Blender too now! :)
** Drag works as follows:
- drag-able items are defined by the standard interface ui toolkit
- each button can get this feature, via uiButSetDragXXX(but, ...).
There are calls to define drag-able images, ID blocks, RNA paths,
file paths, and so on. By default you drag an icon, exceptionally
an ImBuf
- Drag items are registered centrally in the WM, it allows more drag
items simultaneous too, but not implemented
** Drop works as follows:
- On mouse release, and if drag items exist in the WM, it converts
the mouse event to an EVT_DROP type. This event then gets the full
drag info as customdata
- drop regions are defined with WM_dropbox_add(), similar to keymaps
you can make a "drop map" this way, which become 'drop map handlers'
in the queues.
- next to that the UI kit handles some common button types (like
accepting ID or names) to be catching a drop event too.
- Every "drop box" has two callbacks:
- poll() = check if the event drag data is relevant for this box
- copy() = fill in custom properties in the dropbox to initialize
an operator
- The dropbox handler then calls its standard Operator with its
dropbox properties.
** Currently implemented
Drag items:
- ID icons in browse buttons
- ID icons in context menu of properties region
- ID icons in outliner and rna viewer
- FileBrowser icons
- FileBrowser preview images
Drag-able icons are subtly visualized by making them brighter a bit
on mouse-over. In case the icon is a button or UI element too (most
cases), the drag-able feature will make the item react to
mouse-release instead of mouse-press.
Drop options:
- UI buttons: ID and text buttons (paste name)
- View3d: Object ID drop copies object
- View3d: Material ID drop assigns to object under cursor
- View3d: Image ID drop assigns to object UV texture under cursor
- Sequencer: Path drop will add either Image or Movie strip
- Image window: Path drop will open image
** Drag and drop Notes:
- Dropping into another Blender window (from same application) works
too. I've added code that passes on mousemoves and clicks to other
windows, without activating them though. This does make using multi-window
Blender a bit friendler.
- Dropping a file path to an image, is not the same as dropping an
Image ID... keep this in mind. Sequencer for example wants paths to
be dropped, textures in 3d window wants an Image ID.
- Although drop boxes could be defined via Python, I suggest they're
part of the UI and editor design (= how we want an editor to work), and
not default offered configurable like keymaps.
- At the moment only one item can be dragged at a time. This is for
several reasons.... For one, Blender doesn't have a well defined
uniform way to define "what is selected" (files, outliner items, etc).
Secondly there's potential conflicts on what todo when you drop mixed
drag sets on spots. All undefined stuff... nice for later.
- Example to bypass the above: a collection of images that form a strip,
should be represented in filewindow as a single sequence anyway.
This then will fit well and gets handled neatly by design.
- Another option to check is to allow multiple options per drop... it
could show the operator as a sort of menu, allowing arrow or scrollwheel
to choose. For time being I'd prefer to try to design a singular drop
though, just offer only one drop action per data type on given spots.
- What does work already, but a tad slow, is to use a function that
detects an object (type) under cursor, so a drag item's option can be
further refined (like drop object on object = parent). (disabled)
** More notes
- Added saving for Region layouts (like split points for toolbar)
- Label buttons now handle mouse over
- File list: added full path entry for drop feature.
- Filesel bugfix: wm_operator_exec() got called there and fully handled,
while WM event code tried same. Added new OPERATOR_HANDLED flag for this.
Maybe python needs it too?
- Cocoa: added window move event, so multi-win setups work OK (didnt save).
- Interface_handlers.c: removed win->active
- Severe area copy bug: area handlers were not set to NULL
- Filesel bugfix: next/prev folder list was not copied on area copies
** Leftover todos
- Cocoa windows seem to hang on cases still... needs check
- Cocoa 'draw overlap' swap doesn't work
- Cocoa window loses focus permanently on using Spotlight
(for these reasons, makefile building has Carbon as default atm)
- ListView templates in UI cannot become dragged yet, needs review...
it consists of two overlapping UI elements, preventing handling icon clicks.
- There's already Ghost library code to handle dropping from OS
into Blender window. I've noticed this code is unfinished for Macs, but
seems to be complete for Windows. Needs test... currently, an external
drop event will print in console when succesfully delivered to Blender's WM.
|
|
- 2 fingers scroll (MOUSEPAN / GHOST_kTrackpadEventScroll event) pans/scrolls the view
- 2 fingers pinch (MOUSEZOOM / GHOST_kTrackpadEventMagnify event) zooms the view
And in 3D view:
- alt + 2 fingers scroll rotates the view
- 2 fingers rotation (MOUSEROTATE / GHOST_kTrackpadEventRotate) orbits the view.
The implementation uses a new GHOST event type: GHOST_kEventTrackpad, that is then dispatched as Blender MOUSEPAN, MOUSEZOOM
or MOUSEROTATE events.
This is currently fully implemented for OSX (GHOST Cocoa fires the new events), with auto-detection of the source peripheral, so that a regular mouse still sends MOUSEWHEEL events.
|
|
The dragging sequence is performed in four phases:
- Start sequence (GHOST_kEventDraggingEntered) that tells a drag'n'drop operation has started. Already gives the object data type, and the entering mouse location
- Update mouse position (GHOST_kEventDraggingUpdated) sent upon each mouse move until the drag'n'drop operation stops, to give the updated mouse position.
Useful to highlight a potential destination, and update the status (through GHOST_setAcceptDragOperation) telling if the object can be dropped at the current cursor position.
- Abort drag'n'drop sequence (GHOST_kEventDraggingExited) sent when the user moved the mouse outside the window.
- Send the dropped data (GHOST_kEventDraggingDropDone)
- Outside of the normal sequence, dropped data can be sent (GHOST_kEventDraggingDropOnIcon). This can happen when the user drops an object on the application icon. (Also used in OSX to pass the filename of the document the user doubled-clicked in the finder)
Note that the event handler is responsible for freeing the received data.
And the mouse position is sent directly in blender client coordinates (y=0 at bottom)
The GHOST_setAcceptDragOperation(TRUE) call must be placed before the user drops the object for it to be accepted.
Current handled data types :
- Text string
- Array of filenames (full paths)
- Bitmap image (not implemented yet)
|
|
- Use an enum for grab modes rather then boolean options.
-- GHOST_kGrabNormal: continuous grab userpref disabled
-- GHOST_kGrabWrap: wrap the mouse at the screen bounds *
-- GHOST_kGrabHide: hide the mouse while grabbing and restore the mouse where it was initially pressed *
GrabWrap is nice for transform and tools where you want some idea where the cursor is, previously I found both restoring the mouse at its original location and restoring at a clamped location was confusing with operators like transform, wrapping is not ideal but IMHO the best of a bad bunch of options.
GrabHide is for numbuts, where restoring the mouse at the initial location isnt so confusing.
|
|
- Window creation at preferred size
Implement in Ghost the use of Cocoa functions to get the maximum visible rect (size and position) for the window contents (all screen excluding dock, top menu, and window title bar)
Thus Apple specific code in window creation (wm_window.c & wm_apple.c) is no more needed => removed in case of Cocoa build
- Alert on exiting despite unsaved changes
Add to GHOST method to maintain an all platforms (not apple specific anymore) status on unsaved changes
Update GHOST_SystemCocoa to use this for asking or not user to confirm exit without saving changes
|
|
Tested in X11 where its fairly confusing.
buttons 4 and 5 are used for the wheel which is well known, but it seems 6 and 7 are used for horizontal scrolling, my mouse assigns the extra 2 buttons to events 8 & 9.
So the X11 events used for buttons called 4&5 in blender are 8&9 in X11.
The mouse buttons can be re-ordered like this once xorg starts (swaps 6,7 with 8,9)
xmodmap -e "pointer = 1 2 3 4 5 8 9 6 7"
Couldn't test Win32, Apple not supported.
If someone wants to add horizontal scrolling its quite easy.
|
|
- last commit, missed include for rna_object_api.c & bad args to find_basis_mball
- use enum for GHOST tablet type None/Stylus/Eraser, had duplicate definition for these in C. Only tested X11, may need to cast to an int for other OS's.
|
|
Added ghost display state hint 'modified file'.
Only supported in osx though (close button in bar gets dot).
|
