| Age | Commit message (Collapse) | Author |
|---|
|
The conversion from double to float was causing a build failure.
Differential Revision: https://developer.blender.org/D12946
|
|
In editors with vertical scale indicators, such as Graph Editor,
Drivers, or VSE, display the values aligned to the view.
Also add a shadow (similar to the 3D View info) to improve readability when the text is on top of curves, strips, or other content.
{F10987240, size=full}
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12809
|
|
This partially reverts commit e62ce9e08e919f25aad444f378947f6be932730f.
|
|
{F10761402}
With active viewport render from camera view, the camera border shows up, even when passepartout and overlays are disabled.
By moving the line-drawing code to the passepartout section, it is effectively disabled when passepartout is off.
Reviewed By: sebastian_k
Differential Revision: https://developer.blender.org/D12745
|
|
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
|
|
This node can be used to fillet splines at control points to
create a circular arc.
The implementation roughly follows T89227's design.
The node works in two main modes: Bezier and Poly
* Bezier: Creates a circular arc at vertices by changing
handle lengths (applicable only for Bezier splines).
* Poly: Creates a circular arc by creating vertices (as
many as defined by the Count fields input) along
the arc (applicable for all spline types).
In both modes, the radius of the created arc is defined
by the Radius fields input.
The Limit Radius attribute can be enabled to prevent
overlapping when the defined radius exceeds the maximum
possible radius for a given point.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D12115
|
|
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
|
|
Lowers tile splitting limit so models with extremely dense mesh
portions could still have reasonable performance while for more
common cases the performance impact should be minimal.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12236
|
|
|
|
For scenes that have a lot of edges, this could potentially
save some time generating individual strokes that are outside
camera frustum.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11525
|
|
This patch ensures that selection mode flushing updates total selection
counts internally. This reduces recounting when we are sure that the
input total selection counts were up to date.
For example for circle selection the total selection counts were
correct. But during flushing the selection could have been changed and
therefore the selection was always recounted.
This increased the performance on selected system from 6.90 FPS to 8.25
FPS during circle selection operations.
Before: {F10179981}
After: {F10179982}
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11647
|
|
Inside the sequencer the cropping and transform of images/buffers were
implemented locally. This reduced the optimizations that a compiler
could do and added confusing code styles. This patch adds
`IMB_transform` to reduce the confusion and increases compiler
optimizations as more code can be inlined and we can keep track of
indices inside the inner loop.
This increases end-user performance by 30% when playing back aa video
in VSE.
Reviewed By: ISS, zeddb
Differential Revision: https://developer.blender.org/D11549
|
|
Remove an unnecessary call to pose_slide_mouse_update_percentage
That call was overriding the typed value
Reviewed By: #animation_rigging, Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11395
Ref D11395
|
|
. . .because I accidentally committed
submodule references.
This reverts commit 482465e18aa7c9f74fcb90ec1002f157a580e240.
|
|
Added a new api function to stich multires grids
on specific faces in a mesh,
subdiv_ccg_average_faces_boundaries_and_corners,
and changed multires normal calc to use it.
VTune profiling showed that this was a major
performance hit once you get above 10,000 or so
base mesh faces and/or have a high number of
subdivision levels.
Here's a video comparing the difference. Note the
bpy.app_debug switch is not in the final commit.
{F10145323}
And the .blend file:
{F10145346}
Reviewed By: Sergey Sharybin (sergey)
Differential Revision:
https://developer.blender.org/D11334
|
|
Cycles, Eevee, OSL, Geo, Attribute
This operator provides consistency with the standard math node. Allows users to use a single node instead of two nodes for this common operation.
Reviewed By: HooglyBoogly, brecht
Differential Revision: https://developer.blender.org/D10808
|
|
An emission texture is currently connected to the Base Color socket. It should connect to the Emission socket, like a constant does.
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10990
|
|
This adds `parallel_for` to the Attribute Curve Map node to improve performance.
Grain size set to 512.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11194
|
|
Some operations may use no preferredResolution ({0, 0}) when calling determineResolution on inputs to check if they have resolution on their own. See MixOperation or MathOperation determineResolution implementation. In such cases {0, 0} resolution ends up being set when an input doesn't have own resolution, breaking propagation of the original preferredResolution. They don't mean to set it as resolution, it's just a check.
This patch only allows to set valid resolutions (>0). When it's 0 it may be understood as "No preferred or determined resolution" so it should not be set to give output operations another chance of finding a proper resolution by calling determineResolution again with a different preferredResolution.
Test file:
{F9932526}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D10972
|
|
Currently viewers and previews only display node trees that have at least one node with fixed resolution size. When all inputs are generated, nothing is displayed in most cases (RGB Node is displayed as a single pixel on previews). By generated I mean inputs not having resolution on their own, they create content dynamically given an output resolution.
This patch adds support for those cases by using an appropriate preferred resolution on Viewers/Previews which propagates to generated inputs as output resolution. Now:
- Viewers will display generated inputs with scene render resolution.
- Previews will display them with scene aspect ratio.
This is consistent with final render result and respects relative space.
The benefit for the user is being able to compose images without any input source. For example for creating mask images or simple backgrounds.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D10611
|
|
This change shows the object or material name with the cursor when picking for a cryptomatte node.
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D10705
|
|
Auto frees cryptomatte session when it the pointer is collected from the
stack.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D10667
|
|
Sync the list of icons in CMakeLists.txt with UI_icons.h.
Restore, in the source file, the FUND icon that was accidentally
deleted.
Delete four old/unused icons.
See also D9715.
|
|
Adds an exception so that the key-binding `control + Tab` does not get
duplicated as `command + Tab` on macOS because this is a global system
shortcut for the app switcher.
The key-binding `command + Tab` was shown for the operators “Toggle
Graph Editor“ and “Toggle Dope Sheet” in Dope Sheet and Graph Editor,
but only `control + Tab` actually worked.
Differential Revision: https://developer.blender.org/D10304
|
|
This reverts commit 78011d712dc311768a501b31917f2eef27af753b.
|
|
Fixed an issue that was causing the app icon to render with a
'plated' background color in the taskbar and other areas of Windows.
Updated all app icons in Microsoft Store package to match Microsoft's
design recommendations.
Added multiple scales for app icons for high resolution displays.
Added high contrast app icons.
Reviewed By: pablovazquez, jmonteath
Maniphest Tasks: T79356
Differential Revision: https://developer.blender.org/D9681
|
|
Fix T83415: 3D View is red when using stereo
The red view was caused by SRGB not being enabled for an SRGB texture attached to the framebuffer.
Currently, when configuring a framebuffer, the first texture attachment needs to be an SRGB format in order for the framebuffer to be binded with SRGB enabled.
Thus, simply changing the SRGB texture attachment as the first texture attachment removes the red color in the view.
Reviewed By: #eevee_viewport, jbakker
Maniphest Tasks: T83415
Differential Revision: https://developer.blender.org/D9845
|
|
This reverts commit 1a375d6eceed4c17f92fd90699645856e0951530.
|
|
Script tool for automation of Steam build files for tasks like {T77348}
For in-depth information see the README.
Related Wiki page: https://wiki.blender.org/wiki/Process/Release_On_Steam
Reviewed By: jbakker
Maniphest Tasks: T77348
Differential Revision: https://developer.blender.org/D8429
|
|
Windows
This is a workaround for T80804.
There's a startup crash that happens on 2.91.0 on Windows, an `EXCEPTION_ACCESS_VIOLATION`
on `atio6axx.dll`. It is triggered by `glClear` on the `detect_mip_render_workaround`
function. The workaround moves the function after the device/driver workaround section and
sets the flag to the affected one to avoid running the check.
It is deprecated hardware that has not meet the minimum requirements since 2.79, but is
still usable and this extends its usability a bit before the cards are finally blacklisted.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9667
|
|
This patch adds support for AOVs in EEVEE. AOV Outputs can be defined in the
render pass tab and used in shader materials. Both Object and World based
shaders are supported. The AOV can be previewed in the viewport using the
renderpass selector in the shading popover.
AOV names that conflict with other AOVs are automatically corrected. AOV
conflicts with render passes get a warning icon. The reason behind this is that
changing render engines/passes can change the conflict, but you might not notice
it. Changing this automatically would also make the materials incorrect, so best
to leave this to the user.
**Implementation**
The patch adds a copies the AOV structures of Cycles into Blender. The goal is
that the Cycles will use Blenders AOV defintions. In the Blender kernel
(`layer.c`) the logic of these structures are implemented.
The GLSL shader of any GPUMaterial can hold multiple outputs (the main output
and the AOV outputs) based on the renderPassUBO the right output is selected.
This selection uses an hash that encodes the AOV structure. The full AOV needed
to be encoded when actually drawing the material pass as the AOV type changes
the behavior of the AOV. This isn't known yet when the GLSL is compiled.
**Future Developments**
* The AOV definitions in the render layer panel isn't shared with Cycles.
Cycles should be migrated to use the same viewlayer aovs. During a previous
attempt this failed as the AOV validation in cycles and in Blender have
implementation differences what made it crash when an aov name was invalid.
This could be fixed by extending the external render engine API.
* Add support to Cycles to render AOVs in the 3d viewport.
* Use a drop down list for selecting AOVs in the AOV Output node.
* Give user feedback when multiple AOV output nodes with the same AOV name
exists in the same shader.
* Fix viewing single channel images in the image editor [T83314]
* Reduce viewport render time by only render needed draw passes. [T83316]
Reviewed By: Brecht van Lommel, Clément Foucault
Differential Revision: https://developer.blender.org/D7010
|
|
During revision of {D8952} one of the comments was to make a function that converts the render percentage to a factor. This to avoid code duplication. However the duplicated code was already all over the compositor code. So in order to avoid this code duplication for {D8952} I propose to first cleanup the duplicated code and build patch {D8952} based on this clean up.
The method that converts the render percentage to a factor is put in the CompositorContext. Why? The CompositorContext keeps DNA information like the renderdata. DNA, and thus the CompositorContext, keeps the size of the render resolution in percentage (user oriented). The compositor needs the size of the render resolution as a factor. So the CompositorContext seems like the obvious place to have this conversion method.
Why not in de NodeBase? The method could've been added to the nodebase, but I wanted to keep the nodebase as clean as possible and not put simple "conversion" methods into this base class. Also I didn't really like the call flow: you'd always have to get the renderdata size from the context and then convert.
Putting it in the CompositorContext avoids this extra invoke of a call.
Why not in the Converter? See nodebase. And the Converter seems more like a class for "structural" and complex node tree conversions. Not the simple conversions.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D9566
|
|
This patch adds an opacity slider to the wireframe overlay. The previous
wireframe in dense geometry scenes could be too dark and sometimes the
user just wants an impression of the geometry during modelling.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D7622
|
|
The voxel remesher was using the voxel size to limit the shrink-wrap
projection distance. Now that distance is increased to help preserving
more detail on hard surface edges.
Reviewed By: pablodp606
Differential Revision: https://developer.blender.org/D6204
|
|
With the new image editor drawing there were was some mutual exclusive
functionality. When rendering the alpha was shown correctly or the pure
emissive colors were shown correctly, but never both. The cause of this
is that the image_gpu did not used the correct alpha mode when generating
gpu textures for non-images (render results, compositors viewer)
The implementation always checked the alpha_mode. Alpha mode is an
attribute for images, but aren't set for non images. This patch adds
a more detailed check to ensure that the gpu texture is premultiplied.
The issue has been tested using several bug report files and production
files.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D8978
|
|
|
|
This reverts commit c28432680971f54ebe95cc953606a3a4d3bc5c7c.
|
|
The CPP Shader class does not initialize the interface attribute.
What will crash when deleting the shader.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8740
|
|
`TH_UV_OTHERS` is a theme option that isn't hooked to anything since
blender 2.80. This patch will remove the option and related code.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8669
|
|
This code was left here after the refactor, it was doing nothing and it
was causing an assert.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8579
|
|
This is done at drawtime automatically.
|
|
Align items in the edit mesh context menus (reducing padding), for
consistency with other menus.
The root layout of menus doesn't add the padding, for sub-layouts
`align` has to be enabled.
{F8749633}
Reviewed By: Julian Eisel
Differential Revision: https://developer.blender.org/D8480
|
|
|
|
|
|
I spotted a duplicate struct declaration, so I had to check for other duplicated as well
There might be some other but i am not confident enough for deleting them
this regex search for duplicate ^(.*;)$\n(\1)$
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D8146
|
|
View2DScrollers used the memory manager to allocate memory. This isn't a
problem but in a upcoming change the scrollers will be drawn more often
than it used to (See {D8066}). To limit the number of allocations and
frees this patch will use the stack for allocation.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8076
|
|
The memory leak is noticeable when using custom bone shapes. When using custom
bone shapes objects could be extracted twice. Where the second extraction can
overwrite data created by the first extraction what causes the memory leak.
Options that have been checked:
1. Use two task graphs phases. One for normal extraction (DST.task_graph) and
the other one will handle extractions that require blocking threads.
2. Keep a list of all objects that needs extraction and only start extraction
when all objects have been populated.
The second would slow performance as the extraction only happens when all
objects have been populated. In the future we might want to go for the second
option when we have the capability to render multiple viewports with a single
populate. As this design isn't clear this patch will implement the first
option.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7969
|
|
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D8021
|
|
Differential Revision: https://developer.blender.org/D7888
|
|
When packing the image the height of the tile was checked to the width
of the packing area. This resulted that the tile was ignored.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7784
|
