Age | Commit message (Collapse) | Author |
|
|
|
This way it is possible to have viewport simplification bumped all the way up,
making viewport really responsive but still have final render to use highest
subdivision possible.
Reviewers: lukastoenne, campbellbarton, dingto
Reviewed By: campbellbarton, dingto
Subscribers: dingto, nutel, eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1273
|
|
|
|
This commit removes the audio panel from Render context as it exists a similar panel in Scene context.
Also, it gives to the Distance Model a similar UI layout as it was in the removed render->audio panel
|
|
also remove empty class parenthesis
|
|
|
|
The logic used for determining whether certain keyframing settings (i.e. visual,
only needed, xyz -> rgb) got applied was wonky. The original intention here was
that the Keying Set settings would override the global settings, and the path
settings would override what was used for the Keying Set. However, that was not
happening in all cases previously, as it was only possible to add flags and not
to turn them off.
This commit fixes that by introducing separate toggles to control whether the
Keying Set/Path's settings override the settings inherited from its parent
(i.e. the Keying Set for the Path, and the User Prefs for the Keying Set).
The icons used for these toggles could get revised a bit (we need something
which communicates "override this"; the current one is the closest I could find)
WARNING: If you have old keying sets, this may cause some breakage!
|
|
Since 1c3f2354f83b3e79dee31d837ca4d7c08d2c3f26 the keyframing settings on
Keying Sets have been incorrectly displayed as a clump of toggle buttons,
which are usually only used when only one of the options apply.
Reverting this back to how it was, while leaving bl_options in place still for
the one case where it makes sense to do it that way (i.e. for KeyingSetInfo)
|
|
Review for the gsoc UI cleanup for the BGE.
Surviving commits are:
- Game Engine UI cleanup: removing Scene/Active Clip
- Game Engine UI cleanup: Adding missing 'not available' labels in empty panels
The rest was reverted for being subjective and polluting the UI code with an if for every button:
http://wiki.blender.org/index.php/User:Brita/GSoC_BGE_cleanup_and_support/reports/final#UI_Review
Reviewers: kupoman
Subscribers: dingto
Projects: #game_ui
Differential Revision: https://developer.blender.org/D982
|
|
Use frosted rather then pyflakes
|
|
Also small alignment tweaks to Keying Sets UI, looks better when the 2 columns have the same alignment.
|
|
Notes:
* Did not touch to addons, that's up to the authors. ;)
* Did not removed any "name" field below lists. We might want to do this in some cases (less UI clutter), but probably not always, so will let maintainers of the related areas decide here.
|
|
* Removed audio-only options from ffmpeg render settings (added some versionning code too)!
* Moved the Mixdon button from the Scene->Audio pannel to the Render->Render panel.
|
|
* Reduce the space of more lists, should be all in bl_ui/
|
|
|
|
* Consistency tweak: for properties based on an enum, we hide the buttons and do not grey out.
Greying out is for properties based on a boolean.
|
|
doing anything. Navigating a list of more than 5 elements requires keyboard.
Systematically adding some custom id to template_list using default UI_UL_list class, this one is commoly used more than once in an area, yielding collision issues if they do not have a custom id...
|
|
|
|
Satoshi Yamasaki aka yamyam, thanks!).
|
|
* Code cleanup for new Rigid Body panels.
* Removed some unneeded split() calls.
* Remove redundant check for "ob.rigid_body_constraint" in the draw() function of the "Rigid Body Constraint" panel. The check is already made in the poll.
|
|
is disabled
|
|
|
|
Add operators to add/remove rigid body world and objects.
Add UI scripts.
The rigid body simulation works on scene level and overrides the
position/orientation of rigid bodies when active.
It does not deform meshes or generate data so there is no modifier.
Usage:
* Add rigid body world in the scene tab
* Create a group
* Add objects to the group
* Assign group to the rigid body world
* Play animation
For convenience the rigid body tools operators in the tools panel of the 3d view
will add a world, group and add objects to the group automatically so you only have
to press one button to add/remove rigid bodies to the simulation.
Part of GSoC 2010 and 2012.
Authors: Joshua Leung (aligorith), Sergej Reich (sergof)
|
|
|
|
* Made Color Management and Audio panel closed by default to save space.
* Added COMPAT_ENGINES to color management panel.
|
|
This assumptions are now made:
- Internally float buffers are always linear alpha-premul colors
- Readers should worry about delivering float buffers with that
assumptions.
- There's an input image setting to say whether it's stored with
straight/premul alpha on the disk.
- Byte buffers are now assumed have straight alpha, readers should
deliver straight alpha.
Some implementation details:
- Removed scene's color unpremultiply setting, which was very
much confusing and was wrong for default settings.
Now all renderers assumes to deliver premultiplied alpha.
- IMB_buffer_byte_from_float will now linearize alpha when
converting from buffer.
- Sequencer's effects were changed to assume bytes have got
straight alpha. Most of effects will work with bytes still,
however for glow it was more tricky to avoid data loss, so
there's a commented out glow implementation which converts
byte buffer to floats first, operates on floats and returns
bytes back. It's slower and not sure if it should actually
be used -- who're using glow on alpha anyway?
- Sequencer modifiers should also be working nice with straight
bytes now.
- GLSL preview will predivide float textures to make nice shading,
shading with byte textures worked nice (GLSL was assuming straight
alpha).
- Blender Internal will set alpha=1 to the whole sky. The same
happens in Cycles and there's no way to avoid this -- sky is
neither straight nor premul and doesn't fit color pipeline well.
- Straight alpha mode for render result was also eliminated.
- Conversion to correct alpha need to be done before linearizing
float buffer.
- TIFF will now load and save files with proper alpha mode setting
in file meta data header.
- Remove Use Alpha from texture mapping and replaced with image
datablock setting.
Behaves much more predictable and clear from code point of view
and solves possible regressions when non-premultiplied images were
used as textures with ignoring alpha channel.
|
|
if the list is given the wrong item then the script needs to be fixed, better not fail silently.
left in checks as commented out asserts.
|
|
from all the limitations this implied (mostly, the "only one list per panel" one).
It introduces a new (py-extendable and registrable) RNA type, UIList (roughly similar to Panel one), which currently contains only "standard" list's scroll pos and size (but may be expended to include e.g. some filtering data, etc.). This now makes lists completely independent from Panels!
This UIList has a draw_item callback which allows to customize items' drawing from python, that all addons can now use. Incidentally, this also greatly simplifies the C code of this widget, as we do not code any "special case" here anymore!
To make all this work, other changes were also necessary:
* Now all buttons (uiBut struct) have a 'custom_data' void pointer, used currently to store the uiList struct associated with a given uiLayoutListBox.
* DynamicPaintSurface now exposes a new bool, use_color_preview (readonly), saying whether that surface has some 3D view preview data or not.
* UILayout class has now four new (static) functions, to get the actual icon of any RNA object (important e.g. with materials or textures), and to get an enum item's UI name, description and icon.
* UILayout's label() func now takes an optional 'icon_value' integer parameter, which if not zero will override the 'icon' one (mandatory to use "custom" icons as generated for material/texture/... previews).
Note: not sure whether we should add that one to all UILayout's prop funcs?
Note: will update addons using template list asap.
|
|
from the Shading panel, since it's about color space conversion for renders.
|
|
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
|
|
|
|
* Code cleanup, removed unneeded code.
* Style cleanup, don't break lines to early
(unless marked as pep8-80 or pep8-120 compliant)
* Keep 1 line after layout declaration empty.
|
|
|
|
manually in UI files
|
|
* Use custom names for the keying options enum. The old automated layout dumped
out lengthy names which
didn't work well with the limited UI widths we were using, leading to all the
interesting stuff getting cropped out
* Moved the "array target" options to be in line with the rest of the target
specification stuff. I've ended up flattening that set of options into a single
row, which seems to work quite well.
* Removed label from grouping method enum. There was a perfectly good section
header above, and with narrow UI's, the name of this and the one below ended up
looking the same/confusing.
|
|
*Add a new idname to keyingsets, keeping name as label-only (using same string for both made lookup fail when using i18n other than english, as it tried to compare an untranslated static string id against a translated RNA name). Also adding a description string (can be helpful with custom keyingsets, imho).
*Fixed a few other bugs related to that area (namely, you can’t deselect current keyingset from the shift-ctrl-alt-I popup menu, and insert/delete key ops were using a rather strange way to get chosen custom keyingset…).
*Fixed UI code so that it always uses (RNA) enum, and simplified menu-creation code.
|
|
rather than making all properties have ffmpeg_ and quicktime_ prefixes
|
|
the first Cucumber merge.
|
|
---------------------------------------------------------------
This was a test drive to see how painful the merge will be.
Next batches are:
- use desktop option for fullscreen
- multisampling option
- bullet collision mask
- python
- storage (vbo, dl, ...)
- lighting
[lighting still needs review]
[python could use review, although it should be straightforward]
[storage should be tested more I think]
Merged /branches/soc-2011-cucumber:r
36991,37059,37157,37416,37497-37499,37501,37522,39036,40593
36991:
==UI==
* Made some options available in Blender Game that were only available in Blender Render (camera resolution, animation fps)
* Created a panel for the embedded player
* Renamed the FPS option for the standalone player to Refresh Rate
* Moved framing options to display
* Made a button to launch the blender player from within blender (only tested on windows for now)
37059:
==UI==
* Added the option to change the exit key for the BGE. The UI currently just sets a number, and this feature most likely does not work for blenderplayer yet. More work on this to come.
* Removed the physics settings from the scene panel for the BGE.
* Added an Add menu in the logic brick header.
37157:
Making the bake options available in Blender Game
37416:
Making the exit key UI element accept key presses instead of numbers. It still does not work for the Blenderplayer, and it does not limit the input to key presses (other events don't work for exiting)
37497:
Some more work on getting the exit key to work in the Blenderplayer.
Input is now restricted to keyboard events only for the exit key UI.
37498:
Some clean up from the last commit.
The exit key setting affects the Blenderplayer now.
37499:
Cleaning up some duplicate code. Now the reverseTranslateTable for converting blender key codes to ketsji key codes is only defined in BL_BlenderDataConverter.
37501:
Centralizing the exit key methods to the keyboard devices. This should make it easier to get exit key control to the python API.
[37517: committed previously]
37522:
Moved control of the exit key away from the keyboard devices, and moved it to ketsjiengine.
Added setExitKey and getExitKey to the python API
39036:
A couple of the doversions were in the wrong spot. This should fix some issues with the exit key not being set.
[not committed entirely, see below]]
40552: space_logic.py (* fixed an error in space_logic.py *)
40593:
launch blenderplayer from ui not working in OSX fix - by Daniel Stokes and me
########################################################
code left behind (to be included in next commit):
########################################################
{
/* Initialize default values for collision masks */
Object *ob;
for(ob=main->object.first; ob; ob=ob->id.next)
ob->col_group = ob->col_mask = 1;
}
|
|
* Code cleanup.
|
|
* Minor tweaks after tomato merge, rest of Tomato UI code is excellent. :)
|
|
===========================
Commiting camera tracking integration gsoc project into trunk.
This commit includes:
- Bundled version of libmv library (with some changes against official repo,
re-sync with libmv repo a bit later)
- New datatype ID called MovieClip which is optimized to work with movie
clips (both of movie files and image sequences) and doing camera/motion
tracking operations.
- New editor called Clip Editor which is currently used for motion/tracking
stuff only, but which can be easily extended to work with masks too.
This editor supports:
* Loading movie files/image sequences
* Build proxies with different size for loaded movie clip, also supports
building undistorted proxies to increase speed of playback in
undistorted mode.
* Manual lens distortion mode calibration using grid and grease pencil
* Supervised 2D tracking using two different algorithms KLT and SAD.
* Basic algorithm for feature detection
* Camera motion solving. scene orientation
- New constraints to "link" scene objects with solved motions from clip:
* Follow Track (make object follow 2D motion of track with given name
or parent object to reconstructed 3D position of track)
* Camera Solver to make camera moving in the same way as reconstructed camera
This commit NOT includes changes from tomato branch:
- New nodes (they'll be commited as separated patch)
- Automatic image offset guessing for image input node and image editor
(need to do more tests and gather more feedback)
- Code cleanup in libmv-capi. It's not so critical cleanup, just increasing
readability and understanadability of code. Better to make this chaneg when
Keir will finish his current patch.
More details about this project can be found on this page:
http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2011
Further development of small features would be done in trunk, bigger/experimental
features would first be implemented in tomato branch.
|
|
|
|
* Moved Operators from bl_ui into bl_operators.
* Renamed HELP_OT_operator_cheat_sheet to WM_OT_operator_cheat_sheet.
|
|
|
|
|
|
|
|
|
|
- Make gettext stuff draw-time. so switching between languages
can happens without restart now.
- Added option to translate visible interface (menus, buttons, labels)
and tooltips. Now it's possible to have english UI and localized tooltips.
- Clean-up sources, do not use gettext stuff for things which can be
collected with RNA.
- Fix issues with windows 64bit and ru_RU locale on my desktop
(it was codepage issue).
- Added operator "Get Messages" which generates new text block with
with all strings collected from RNA.
- Changed script for updating blender.pot so now it appends
messages collected from rna to automatically gathered messages.
To update .pot you have to re-generate messages.txt using "Get Messages"
operator and then run update_pot script.
- Clean up old translation stuff which wasn't used and most probably
wouldn't be used.
- Return back "International Fonts" option, so if it's disabled, no
gettext lookups happens on draw.
- Merged read_homefile function back. No need in splitting it.
TODO:
- Custom fonts and font size.
Current font isn't nice at least for russian locale, it's
difficult to read it.
- Put references to messages.txt so gettext can merge translation when
name/description of some property changes.
|
|
* The new NAVMESH Modifier did not show any buttons, console printed errors instead!
* Poll of "PHYSICS_PT_game_obstacles" panel caused errors as well, self instead of cls was used as argument.
* Check to show/hide buttons in "WORLD_PT_game_physics_obstacles" panel did not worked due to wrong ENUM identifier ('None' instead if 'NONE')
* Moved "SCENE_PT_navmesh" panel out of properties_scene.py into the properties_game.py where it belongs and renamed it. Also, don't use abreviations in Panel Headers (Navmesh > Navigaion Mesh)
* Code cleanup, removed unnescecary code.
* bpy.types.Panel > Panel
|