| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
This patch will share the AOV settings between Cycles and Eevee.
It enable using the AOV name conflict detection of Blender. This
means that unlike how Cycles used to work it isn't possible to add an
AOV with a similar name. Conflicts with internal render pass names will
be indicated with an Warning icon.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D9774
|
|
This reports warnings with `--debug-python` since all panel
sub-classes are expected to be registered.
|
|
In Cycles the volume transmittance is already composited into the color
passes. In Eevee the volume transmittance pass was separate and needed
to be composited in the compositor. This patch adds the volume
transmittance pass direct in the next render passes:
* Diffuse Color
* Specular Color
* Emission
* Environment
This patch includes the removal of the volume transmittance render pass.
It also renames the volume render passes to match Cycles. The setting
themselves aren't unified.
Maniphest Tasks: T81134
|
|
|
|
Caused by {rB5baae026a86f}
|
|
Cryptomatte is a standard to efficiently create mattes for compositing. The
renderer outputs the required render passes, which can then be used in the
compositor to create masks for specified objects. Unlike the Material and Object
Index passes, the objects to isolate are selected in compositing, and mattes
will be anti-aliased.
Cryptomatte was already available in Cycles this patch adds it to the EEVEE
render engine. Original specification can be found at
https://raw.githubusercontent.com/Psyop/Cryptomatte/master/specification/IDmattes_poster.pdf
**Accurate mode**
Following Cycles, there are two accuracy modes. The difference between the two
modes is the number of render samples they take into account to create the
render passes. When accurate mode is off the number of levels is used. When
accuracy mode is active, the number of render samples is used.
**Deviation from standard**
Cryptomatte specification is based on a path trace approach where samples and
coverage are calculated at the same time. In EEVEE a sample is an exact match on
top of a prepared depth buffer. Coverage is at that moment always 1. By sampling
multiple times the number of surface hits decides the actual surface coverage
for a matte per pixel.
**Implementation Overview**
When drawing to the cryptomatte GPU buffer the depth of the fragment is matched
to the active depth buffer. The hashes of each cryptomatte layer is written in
the GPU buffer. The exact layout depends on the active cryptomatte layers. The
GPU buffer is downloaded and integrated into an accumulation buffer (stored in
CPU RAM).
The accumulation buffer stores the hashes + weights for a number of levels,
layers per pixel. When a hash already exists the weight will be increased. When
the hash doesn't exists it will be added to the buffer.
After all the samples have been calculated the accumulation buffer is processed.
During this phase the total pixel weights of each layer is mapped to be in a
range between 0 and 1. The hashes are also sorted (highest weight first).
Blender Kernel now has a `BKE_cryptomatte` header that access to common
functions for cryptomatte. This will in the future be used by the API.
* Alpha blended materials aren't supported. Alpha blended materials support in
render passes needs research how to implement it in a maintainable way for any
render pass.
This is a list of tasks that needs to be done for the same release that this
patch lands on (Blender 2.92)
* T82571 Add render tests.
* T82572 Documentation.
* T82573 Store hashes + Object names in the render result header.
* T82574 Use threading to increase performance in accumulation and post
processing.
* T82575 Merge the cycles and EEVEE settings as they are identical.
* T82576 Add RNA to extract the cryptomatte hashes to use in python scripts.
Reviewed By: Clément Foucault
Maniphest Tasks: T81058
Differential Revision: https://developer.blender.org/D9165
|
|
This patch adds support for AOVs in EEVEE. AOV Outputs can be defined in the
render pass tab and used in shader materials. Both Object and World based
shaders are supported. The AOV can be previewed in the viewport using the
renderpass selector in the shading popover.
AOV names that conflict with other AOVs are automatically corrected. AOV
conflicts with render passes get a warning icon. The reason behind this is that
changing render engines/passes can change the conflict, but you might not notice
it. Changing this automatically would also make the materials incorrect, so best
to leave this to the user.
**Implementation**
The patch adds a copies the AOV structures of Cycles into Blender. The goal is
that the Cycles will use Blenders AOV defintions. In the Blender kernel
(`layer.c`) the logic of these structures are implemented.
The GLSL shader of any GPUMaterial can hold multiple outputs (the main output
and the AOV outputs) based on the renderPassUBO the right output is selected.
This selection uses an hash that encodes the AOV structure. The full AOV needed
to be encoded when actually drawing the material pass as the AOV type changes
the behavior of the AOV. This isn't known yet when the GLSL is compiled.
**Future Developments**
* The AOV definitions in the render layer panel isn't shared with Cycles.
Cycles should be migrated to use the same viewlayer aovs. During a previous
attempt this failed as the AOV validation in cycles and in Blender have
implementation differences what made it crash when an aov name was invalid.
This could be fixed by extending the external render engine API.
* Add support to Cycles to render AOVs in the 3d viewport.
* Use a drop down list for selecting AOVs in the AOV Output node.
* Give user feedback when multiple AOV output nodes with the same AOV name
exists in the same shader.
* Fix viewing single channel images in the image editor [T83314]
* Reduce viewport render time by only render needed draw passes. [T83316]
Reviewed By: Brecht van Lommel, Clément Foucault
Differential Revision: https://developer.blender.org/D7010
|
|
|
|
In EEVEE the AO renderpass influenced other render passes. Until now the
pass wasn't selectable when AO was disabled in the scene to remove these
render artifacts.
This patch allows rendering EEVEE AO pass without enabling it in the
scene. It does this by binding a fallback texture that is used by the
surface shaders.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7956
|
|
Follow-up to previous commit.
Some examples:
{F8473507} {F8473508} {F8473509} {F8473510}
For more screenshots, please see D7430.
We use column or row headings here to bring more structure, and to give
the eye visual anchors which aid eye-scanning. The left-aligned
checkboxes likewise help with this. And we keep the adherence to the
center line, so the alignment matches up between the various buttons and
controls.
* Changes the property split percentage from 50/50% to 40/60%. This is
needed to give enough space for the checkboxes. But in most cases this
looks better anyway - see Transform panel. In some cases it simply
fills out the available space more efficently.
* Fix various hacks where we previously used manually defined splits.
When we did this, the alignment was never quite right, and the layout
code was a mess.
* Adds column headings to many places where a list of checkboxes all
share a common purpose or leading text.
* Add checkbox + value configurations various places where a checkbox
only serves to enable the value slider
* Removes most uses of grid flow layout. The grid flow layouts combine
poorly with column headings, and also they would mess alignment up
badly. The grid flow layouts also often made buttons and controls jump
around on the screen if you would just resize editors slightly,
causing visual confusion, making users lose their place. The logic for
at what time the list of items would re-flow was often flawed, jumping
to multiple columns too fast or too late - and frankly, the grid flow
layouts would often just look bad.
Maniphest Task: https://developer.blender.org/T65965
Differential Revision: https://developer.blender.org/D7430
Reviewed by: Brecht Van Lommel, Pablo Vazquez.
Most work here by William Reynish, few changes by Julian Eisel.
|
|
|
|
This patch adds new render passes to EEVEE. These passes include:
* Emission
* Diffuse Light
* Diffuse Color
* Glossy Light
* Glossy Color
* Environment
* Volume Scattering
* Volume Transmission
* Bloom
* Shadow
With these passes it will be possible to use EEVEE effectively for
compositing. During development we kept a close eye on how to get similar
results compared to cycles render passes there are some differences that
are related to how EEVEE works. For EEVEE we combined the passes to
`Diffuse` and `Specular`. There are no transmittance or sss passes anymore.
Cycles will be changed accordingly.
Cycles volume transmittance is added to multiple surface col passes. For
EEVEE we left the volume transmittance as a separate pass.
Known Limitations
* All materials that use alpha blending will not be rendered in the render
passes. Other transparency modes are supported.
* More GPU memory is required to store the render passes. When rendering
a HD image with all render passes enabled at max extra 570MB GPU memory is
required.
Implementation Details
An overview of render passes have been described in
https://wiki.blender.org/wiki/Source/Render/EEVEE/RenderPasses
Future Developments
* In this implementation the materials are re-rendered for Diffuse/Glossy
and Emission passes. We could use multi target rendering to improve the
render speed.
* Other passes can be added later
* Don't render material based passes when only requesting AO or Shadow.
* Add more passes to the system. These could include Cryptomatte, AOV's, Vector,
ObjectID, MaterialID, UV.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D6331
|
|
This panel is arguably the most important in the ViewLayer properties, so
the concept of "1 panel open per context" doesn't work. Especially since
the first panel (View Layer) contains only two settings.
|
|
|
|
|
|
Neither is very descriptive for its task, but at least workbench is more
future proof and distinguishes it from Eevee.
|
|
|
|
|
|
This is intended for quick renders for previsualization, animation previews
or sequencer previews. It provides the same settings as found in the 3D view
Shading popover in solid display mode, but in the scene render properties.
The "Workbench" engine was removed, and this name no longer appears in the
user interface, it's purely an internal name. We might come up with a better
name for this OpenGL engine still, but it's good to be consistent with the
OpenGL Render operator name since this has a similar purpose.
|
|
|
|
The ClayEngine was introduced to test the blender2.8 architecture during
development. As currently we have the wanted features implemented with
matcaps we are going to remove the clay engine as it was never intended
to be an official releasable engine
Note: The test cases are never run. But when enabled will be skipped as
they were implemented over the Clay Engine
|
|
|
|
This will be handled by the new view layer override system which will
store data elsewhere, removing the code already for easier refactoring.
|
|
This mean we can now have different shadow resolutions for both.
However each shadow type keep the same size accross all lamps because of
future "real" Cube Shadowmaps limitation and to save texture sampler slots.
That said the cascade shadow resolution could (in the future) still be
changed to be adjustable per sun lamp.
|
|
Both the scene and workspace had an active view layer, and it was confusing
which settings were being used or displayed where. Now we always have one,
so there is no mismatch.
The "View Layers" tab in the properties editor is now "View Layer", no longer
showing a list of layers. Instead view layers can be added and removed with
the workspace view layer selector. They are also listed and selectable in the
outliner.
Single layer rendering uses the active view layer from the workspace.
This fixes bugs where the wrong active view layer was used, but more places
remain that are wrong and are now using the first view layer in the scene.
These are all marked with BKE_view_layer_context_active_PLACEHOLDER.
|
|
Multi-View was never a per-viewlayer option. And now that we have viewlayer
it is better to name it in a more recognizable way:
"Stereoscopy" instad of plain "Views".
|
|
|
|
ViewRender was removed, which means we can't get the render engine for files
saved in 2.8. We assume that any files saved in 2.8 were intended to use Eevee
and set the engine to that.
A fix included with this is that .blend thumbails now draw with Clay mode,
and never Eevee or Cycles. These were drawn with solid mode in 2.7, and should
be very fast and not e.g. load heavy image textures.
Differential Revision: https://developer.blender.org/D3156
|
|
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
|
|
This reverts commit 8a7c0abc2d548d88b755a1c712aa06f0ee631076.
|
|
This patch adds F12 offline Freestyle rendering support to Eevee.
Most functionalities are identical with those found in Cycles.
The only major difference is that the per-view layer "use Freestyle" toggle
option is currently placed in the "Passes" panel of the "View Layers"
properties window instead of a "Layer" panel as in Cycles. Since Freestyle
is a post-processed overlay and not a pass, the present option location is
a compromise. To describe this fact, the per-layer "use Freestyle" option
is in a subsection labeled as "Layer".
Reviewers: fclem, brecht, campbellbarton
Reviewed By: fclem, brecht
Subscribers: dfelinto
Differential Revision: https://developer.blender.org/D3084
|
|
|
|
Eevee: Render: Fix crash when not enabling mist pass.
|
|
|
|
|
|
|
|
|
|
This comes with a lot of code simplification that leads to a small performance improvement.
|
|
Using GL_RG16I texture for the hit coordinates increase tremendously the precision of the hit.
The sign of the integer is used to 2 flags (has_hit and is_planar).
We do not store the depth and retrieve it from the depth buffer (increasing bandwith by +8bit/px).
The PDF is stored into another GL_R16F texture.
We remove the raycount for simplicity and to reduce compilation time (less branching in refraction shader).
|
|
|
|
This option prevent from automatically blurring the albedo color applied to the SSS.
While this is great for preserving details it can bleed more light onto the nearby objects since the blurring will be done on pure "white" irradiance.
This issue is to be tackled in a separate commit.
|
|
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
|
