| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
The layout was wrong.
|
|
Following with the changes included to interpolate strokes of different number of points, a full review has been done in the interpolation tools.
* Interpolate now is a tool and not an operator. It was not logic to have this tool as a button.
* Interpolate tool parameters have been moved to topbar.
* Interpolate popover has been removed from topbar and interpolate `Sequence` operator has been moved to grease pencil menu.
* Interpolate Sequence now include a Redo panel.
* Interpolate tool now allows to select the strokes by pairs. This allows to interpolate any stroke with any stroke and not as before that it was only possible by drawing order. If no stroke is selected, the interpolation is done as before.
* Now is possible interpolate again if a previous keyframe exist. Before, it was impossible to interpolate two times in same frame and this made impossible to do the interpolation by groups of frames.
* New automatic option to `Flip strokes` if the stroke and end are not in the right position. Also the flip can be set manually for corner cases.
* Cleanup of menus related to interpolate.
* Fixed some bugs and removed parameters from scene because now all are tool or operator contained.
* Some code cleanup and function renames.
This commit also includes the some codebase to future implementation of the concept `Vertex Active` that now does not exist in grease pencil.
|
|
While useful in some cases, this meant it wasn't possible to use the
"Floor" for object placement without looking top-down or bottom up.
|
|
Texture paint tools were using DEFAULT cursor instead of PAINT_CROSS cursor as vertex paint, weight paint and sculpt modes.
Before
{F9591366}
After
{F9591370}
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10172
|
|
This is intended to be used when settings don't fit in the top bar,
so it makes sense to keep them last.
|
|
In practice it's common these settings shouldn't be linked for drawing
the initial (base) plane, compared with the height.
|
|
|
|
This makes it more convent to add many objects with a fixed aspect ratio.
|
|
Move some of the more obscure options into a popover,
so they don't take up so much room in the top-bar.
|
|
This adds a "Snap to" option that allows using all the scenes snap
settings which includes incremental & absolute grid snapping options.
This is optional because always following scene snapping would not
snap to geometry by default (which seems to be the most useful default).
|
|
Based on feedback from @dbystedt, include this in 2.92
with some updates (coming next).
|
|
While using the Sample Weight tool in Weight Paint mode, user eyedropper mouse cursor.
Differential Revision: https://developer.blender.org/D9431
Reviewed by Pablo Vazquez
|
|
While using the Sample Weight tool in Weight Paint mode, show weight value in tool header.
Differential Revision: https://developer.blender.org/D9432
Reviewed by Pablo Vazquez
|
|
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
|
|
When in Sequencer/Preview mode, the Sampler was on top, which normally
is the place of Select, and Annotation seems to be after Sampler in the
bottom in the various editors.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9821
|
|
Use 'and' instead of ampersand in descriptions and comments.
Differential Revision: https://developer.blender.org/D9797
Reviewed by Aaron Carlisle
|
|
Some changes here are planned which need feedback from users before
declaring this ready for the next release.
|
|
This adds an option to orientate the trimming shape using the surface
normal instead of the view when lasso trim is used.
Reviewed By: dbystedt, sergey
Differential Revision: https://developer.blender.org/D9231
|
|
This adds a tool property for sculpt line gesture tools (line and
project) to limits its effect to the segment of the gesture instead of
using the infinite line to bisect the mesh in two parts.
To achieve that, the line gesture now has two extra side planes that can
be enabled/disabled for getting the nodes from the PBVH and to test the
vertices.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9307
|
|
The new parameter allows to define if after cutting the stroke the cap of the cut side will be set as flat.
Before, the cap shape of the cut side always was equal to the original stroke, and in some situations, the rounded cap was visible.
Note: If the angle of the join is very extreme, it's still possible to view some sections of the cut stroke.,
|
|
All tools planned for 2.91 now have icons, so this option can be
removed.
Reviewed By: dfelinto, Severin
Differential Revision: https://developer.blender.org/D9299
|
|
When using the sculpt filters, global automasking settings that affect
all brushes were ignored because the automasking system was not
implemented for filters, making filters and brushes react differently
to the global sculpt settings which creates confusion.
This makes all filter tools (mesh, cloth, color) use the same general
automasking settings and features as the brush tools. Filters will now
use the settings in the options panel to limit their effect.
This also removes the "use Face Sets" option from the Mesh filter code,
as it was duplicated from the automasking code just to have that
funcitonality. This is now handled by the regular automasking system.
The "Use Face Sets" option is still available in the cloth filter as that
option limits the action of the forces, not the displacement.
After this, it is possible to initialize the automasking system
independently from the StrokeCache and Brush settings, so it can also be
added to more tools and features in the future.
Fixes T81619
Reviewed By: dbystedt, sergey
Maniphest Tasks: T81619
Differential Revision: https://developer.blender.org/D9171
|
|
This adds an operator property to use the paint cursor radius and
position for the depth of the trimming shape created by the trimming
tools.
When enabled, the shape is located in the surface point when the gesture
started and it will have the depth of the cursor radius. When the cursor
is not over the mesh, the shape will be positioned at the center of the
depth of the whole object from the viewport camera.
Reviewed By: dbystedt, sergey
Differential Revision: https://developer.blender.org/D9129
|
|
This enables a union boolean mode for the trimming gestures tools which
adds geometry to the mesh instead of cutting it.
It also adds a Join mode, which adds the geometry directly without
using a boolean operation.
Depending if you plan to use dyntopo or not, it is useful to have both
options available.
This is using the full depth of the object from the camera view for the
depth of the geometry, but options for controlling the trimming depth in
all modes are going to be added in later patches
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9066
|
|
|
|
|
|
This tool projects all vertices to the right of the plane defined by the
line gesture towards the plane. By doing this, this tool can create cuts
and plane surfaces in the mesh without modifying the geometry or using
boolean operations, so it is much faster than bisecting the mesh for
cases where the geometry was going to be remeshed afterwards.
Added as experimental as it does not have icon.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D9021
|
|
This adds support for line gesture to SculptGestureContext and
implements a Mask Line tool, which affects everything to the right of a plane
defined by the straightline gesture.
For this to work, a new WM_gesture_straightline_oneshot_modal is needed
which only runs exec when the gesture is over.
Added as experimental as it does not have icon.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8722
|
|
|
|
|
|
This removes from the UI all tools with missing icons and hides them
under a "Tools with missing icons" experimental option.
We agree on not making available by default tools in master without icons.
Having this experimental flag will allow to commit new tools as soon as the
technical design and implementation is finished so development can
continue, without adding broken icons to the UI.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8831
|
|
This implements Box Trim as a boolean based trimming too gesture in sculpt
mode. This is the intended way to remove parts of the sculpt instead of
using box mask and mask slice. It also creates new face sets for the new
faces created after the boolean operation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8766
|
|
This implements the sculpt gesture lasso and box operators for face
sets. They work the same way as the mask gesture operator and tools.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8716
|
|
This adds the orientation modes to the Cloth Filter.
Similar to the mesh filter, they set the orientation of the axis when
limiting the forces.
When using the gravity mesh filter, the orientation also sets the gravity
direction. In world orientation, cloth will always fall towards the
ground plane. In view mode, cloth will always fall down relative to the
view.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8618
|
|
Previously, the XYZ deform axis of the Mesh Filter were limited to
object space (which is the default for sculpt mode). Now it is possible
to limit the XYZ displacement in Local, Global or View space.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8582
|
|
This uses the same concept of the Mesh Filter but for applying the cloth
filter forces, so now it can be limited to a specific axis.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8567
|
|
This uses a single row for the three axis instead of a row per axis.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8581
|
|
Previously the way to use this operations was using the shortcut Ctrl +
W and Ctrl + Alt + W, which was not very discoverable and it was
limiting the amount of options that can be added to the operator.Now the
same functionality of the operator is available as a tool, which will
make easier to add other editing operations and options without adding
more entries to the keymap.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8545
|
|
Now the operators are split to define different default values. This is also required for the future Bezier primitive tools.
This allows to show in the Topbar the number of subdivisions. Before this value was totally hidden and it was number of Edges. The wheelmouse can be used to override the value while running, but does not change the default value.
{F8766270}
All operators share same code.
Also, fixed some bad practices done with Toolbar in python.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D8506
|
|
This adds a property that checks the normals of each vertex against the
view direction to decide if they should be masked (similar to the
"Front Faces Only" option works for brushes.
Reviewed By: sergey
Maniphest Tasks: T77637
Differential Revision: https://developer.blender.org/D8448
|
|
This implements collisions in the solver of the cloth brush/filter. It
uses the scene colliders as a regular physics simulation.
There are still some parameters (friction, distance to the surface...)
that can be exposed as properties in later patches.
Thanks to Sebastian Parborg for helping me with the implementation.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8019
|
|
This adds a curvature smoothing and intensify details properties to control
the result of the Sharpen Mesh Filter.
Curvature smoothing removes high frequency details from the precalculated
sharpen data, so the filter result has much smoother surfaces and cleaner
sharpen lines;
Intensify details displaces the vertices of creases and valleys in the direction
opposite to its neighbors average, so it intensifies high frequency details
in those areas, producing more noisy and sharp shapes:
Both this properties can be used in combination to achieve a good balance of
high and low frequency details depending on the shape and the desired result.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8447
|
|
Optionally use the surface normal under the mouse cursor.
|
|
- Exposes affect enum in the header instead of profile type.
- Add two missing options from the operator
|
|
This matches the change that was done to the bevel modifier so that the
interface for the modifier, the active tool, and the operator are consistent.
This commit extends the refactor to the bmesh implementation too, so
that the parameters in the implementation don't stray too far from what
is exposed.
Tests are adjusted and still pass.
|
|
Register key-maps from tools in functions.
|
|
This disables all Sculpt Vertex Colors tools, operators, panels and rendering capabilities and puts them under the "Use Sculpt Vertex Colors" experimental option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8239
|
