| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This tool projects all vertices to the right of the plane defined by the
line gesture towards the plane. By doing this, this tool can create cuts
and plane surfaces in the mesh without modifying the geometry or using
boolean operations, so it is much faster than bisecting the mesh for
cases where the geometry was going to be remeshed afterwards.
Added as experimental as it does not have icon.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D9021
|
|
This adds support for line gesture to SculptGestureContext and
implements a Mask Line tool, which affects everything to the right of a plane
defined by the straightline gesture.
For this to work, a new WM_gesture_straightline_oneshot_modal is needed
which only runs exec when the gesture is over.
Added as experimental as it does not have icon.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8722
|
|
|
|
|
|
This removes from the UI all tools with missing icons and hides them
under a "Tools with missing icons" experimental option.
We agree on not making available by default tools in master without icons.
Having this experimental flag will allow to commit new tools as soon as the
technical design and implementation is finished so development can
continue, without adding broken icons to the UI.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8831
|
|
This implements Box Trim as a boolean based trimming too gesture in sculpt
mode. This is the intended way to remove parts of the sculpt instead of
using box mask and mask slice. It also creates new face sets for the new
faces created after the boolean operation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8766
|
|
This implements the sculpt gesture lasso and box operators for face
sets. They work the same way as the mask gesture operator and tools.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8716
|
|
This adds the orientation modes to the Cloth Filter.
Similar to the mesh filter, they set the orientation of the axis when
limiting the forces.
When using the gravity mesh filter, the orientation also sets the gravity
direction. In world orientation, cloth will always fall towards the
ground plane. In view mode, cloth will always fall down relative to the
view.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8618
|
|
Previously, the XYZ deform axis of the Mesh Filter were limited to
object space (which is the default for sculpt mode). Now it is possible
to limit the XYZ displacement in Local, Global or View space.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8582
|
|
This uses the same concept of the Mesh Filter but for applying the cloth
filter forces, so now it can be limited to a specific axis.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8567
|
|
This uses a single row for the three axis instead of a row per axis.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8581
|
|
Previously the way to use this operations was using the shortcut Ctrl +
W and Ctrl + Alt + W, which was not very discoverable and it was
limiting the amount of options that can be added to the operator.Now the
same functionality of the operator is available as a tool, which will
make easier to add other editing operations and options without adding
more entries to the keymap.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8545
|
|
Now the operators are split to define different default values. This is also required for the future Bezier primitive tools.
This allows to show in the Topbar the number of subdivisions. Before this value was totally hidden and it was number of Edges. The wheelmouse can be used to override the value while running, but does not change the default value.
{F8766270}
All operators share same code.
Also, fixed some bad practices done with Toolbar in python.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D8506
|
|
This adds a property that checks the normals of each vertex against the
view direction to decide if they should be masked (similar to the
"Front Faces Only" option works for brushes.
Reviewed By: sergey
Maniphest Tasks: T77637
Differential Revision: https://developer.blender.org/D8448
|
|
This implements collisions in the solver of the cloth brush/filter. It
uses the scene colliders as a regular physics simulation.
There are still some parameters (friction, distance to the surface...)
that can be exposed as properties in later patches.
Thanks to Sebastian Parborg for helping me with the implementation.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8019
|
|
This adds a curvature smoothing and intensify details properties to control
the result of the Sharpen Mesh Filter.
Curvature smoothing removes high frequency details from the precalculated
sharpen data, so the filter result has much smoother surfaces and cleaner
sharpen lines;
Intensify details displaces the vertices of creases and valleys in the direction
opposite to its neighbors average, so it intensifies high frequency details
in those areas, producing more noisy and sharp shapes:
Both this properties can be used in combination to achieve a good balance of
high and low frequency details depending on the shape and the desired result.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8447
|
|
Optionally use the surface normal under the mouse cursor.
|
|
- Exposes affect enum in the header instead of profile type.
- Add two missing options from the operator
|
|
This matches the change that was done to the bevel modifier so that the
interface for the modifier, the active tool, and the operator are consistent.
This commit extends the refactor to the bmesh implementation too, so
that the parameters in the implementation don't stray too far from what
is exposed.
Tests are adjusted and still pass.
|
|
Register key-maps from tools in functions.
|
|
This disables all Sculpt Vertex Colors tools, operators, panels and rendering capabilities and puts them under the "Use Sculpt Vertex Colors" experimental option.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8239
|
|
|
|
This tool generates masks based on the sculpt vertex colors by clicking
on the model, similar to automatic selection tools in image editing
software.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8157
|
|
|
|
This implements a fill mode in the Color Filter tool, which fills the
entire mesh with a specific color.
As this functionality is part of the color filter, this allows to control
the blending of the fill color with the filter strength.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8158
|
|
|
|
`str.format` and `f-string` use was minimal.
Prefer using a single style of string formatting
unless an alternative is more widely adopted.
|
|
Differential Revision: https://developer.blender.org/D8016
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
|
|
This will allow the easier addition of a constant radius mode in the
future and some changes in the UI to mirror the recent similar change
from "Only Vertices" to the "Affect" enum.
|
|
|
|
|
|
This tool is similar to the cloth brush, but it applies the cloth
simulation deformation to the whole mesh in an uniform way. The
simulation can be controlled using the mask to pin vertices and the face
sets to define force action areas.
It uses the same solver as the cloth brush which now no longer depends
on StrokeCache.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7857
|
|
- Interactively adding primitives with two clicks.
- Scene orientation used for new objects.
- Depth [view-plane, axis-plane, surface]
- Origin [base, center]
- Primitive types [cube, cylinder, cone, uv-sphere, ico-sphere ]
- Settings for object types in the top-bar.
Shortcuts:
- Snapping (Ctrl).
- Constrain 1:1 aspect (Shift).
- Toggle center (Alt).
Part of T57210 design task.
|
|
|
|
This change is yet to be followed by a more comprehensive design
proposal including:
* How to differentiate the modes apart.
* More clear definition of tools and the rules for their components (gizmo, cursor).
* Selection as a non-tool vs drag option.
This can be revisited for 2.90 with more time. For now the UI team
agrees to revert this.
--
This reverts commit 4aa703aa1430bc53f19e2cc7182e70db1a916f13.
|
|
Also removes the 'Curve Stroke' panel that showed globally for curve
edit mode. This means the settings will not be available without the
draw tool selected.
Reviewed By: billreynish, campbellbarton
Differential Revision: https://developer.blender.org/D7652
|
|
This patch adds the stabilizer feature of GP to the annotations.
It has a toggle to activate it "Use Stabilizer", and two properties to control the behaviour of the smooth effect (factor and radius).
You can also use shift at start or in the air to temporaly use this feature.
{F8518283}
Differential Revision: https://developer.blender.org/D7648
|
|
This patch adds different kind of shapes/styles for the line extremes while using the annotation line tool.
Current Styles: (following @mendio mockup)
- Arrow (closed arrow)
- Open Arrow
- Segment
- Square
For future it would be great to have icons, it would be more intuitive (and less space) with previews of what each end / start of line does, like the google slides one as reference:
{F8511116}
Reviewed By: #grease_pencil, antoniov, HooglyBoogly
Differential Revision: https://developer.blender.org/D7608
|
|
Follow-up to previous commit.
Some examples:
{F8473507} {F8473508} {F8473509} {F8473510}
For more screenshots, please see D7430.
We use column or row headings here to bring more structure, and to give
the eye visual anchors which aid eye-scanning. The left-aligned
checkboxes likewise help with this. And we keep the adherence to the
center line, so the alignment matches up between the various buttons and
controls.
* Changes the property split percentage from 50/50% to 40/60%. This is
needed to give enough space for the checkboxes. But in most cases this
looks better anyway - see Transform panel. In some cases it simply
fills out the available space more efficently.
* Fix various hacks where we previously used manually defined splits.
When we did this, the alignment was never quite right, and the layout
code was a mess.
* Adds column headings to many places where a list of checkboxes all
share a common purpose or leading text.
* Add checkbox + value configurations various places where a checkbox
only serves to enable the value slider
* Removes most uses of grid flow layout. The grid flow layouts combine
poorly with column headings, and also they would mess alignment up
badly. The grid flow layouts also often made buttons and controls jump
around on the screen if you would just resize editors slightly,
causing visual confusion, making users lose their place. The logic for
at what time the list of items would re-flow was often flawed, jumping
to multiple columns too fast or too late - and frankly, the grid flow
layouts would often just look bad.
Maniphest Task: https://developer.blender.org/T65965
Differential Revision: https://developer.blender.org/D7430
Reviewed by: Brecht Van Lommel, Pablo Vazquez.
Most work here by William Reynish, few changes by Julian Eisel.
|
|
|
|
Basically this new tool constitutes a macro that uses the parameters of
the Extrude and Translate operators that were recently implemented.
Thanks to @CandleComet for initial implementation.
Differential Revision: https://developer.blender.org/D7222
|
|
This mesh filter sharpens and smooths the mesh based on its curvature,
resulting in pinching hard edges and polishing flat surfaces. It fixes
most of the artifacts of the voxel remesher and those produced when
sculpting hard surfaces and stylized models with creasing and flattening
brushes.
It needs and accumulate_displacement step before each filter iteration which
can't be multithreaded in an easy way (it would need something to sync the
threads when modifying the data of neighbors in a different node), but this
does not affect performance in a significant way.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7335
|
|
This tool is set as default tool, so default action on click doesn't have pernament effect.
Reviewed By: campbellbarton
Differential Revision: D7064
|
|
|
|
This implements the Surface Smooth Brush as a mode inside the Smooth tool,
which uses the HC algorithm from "Improved Laplacian Smoothing of Noisy Surface Meshes".
Comparted to the regular smooth brush with laplacian smooth, this brush removes
the surface while preserving the volume of the object.
The smooth result can be controlled by tweaing the original shape preservation,
displacement and iteration count.
The same surface smooth operation is also available as a mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7057
|
|
The threshold only must be vsisible in Segment mode.
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
