| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Only a few are kept not available as their features are not yet supported.
|
|
|
|
|
|
The spreadsheet can retrieve the float selection using the same
utilities as curves sculpt brushes. Theoretically this can work in
original, evaluated, and viewer node modes, at least when the
sculpt selection attributes are able to be propagated.
Differential Revision: https://developer.blender.org/D15393
|
|
|
|
Refactor D14646 to use context.active_action for the Action
Custom Properties panel, matching the already existing Action panel.
This has the advantage that it allows access to the properties of
any actions with channels visible in the Dope Sheet, e.g. Shape Keys,
Materials etc; while using just the active object is limited to just
the object animation.
Also move both panels from Item to the Action tab.
Differential Revision: https://developer.blender.org/D15288
|
|
Adds a new option to the 'Delete ShpaKeys' operator, which first applies
the current mix to the object data, before removing all shapekeys.
Request from @JulienKaspar from Blender studio.
Reviewed By: JulienKaspar
Differential Revision: https://developer.blender.org/D15443
|
|
Similar to snapping to the world origin in the 3D viewport. This can be found
in the Shift+S pie menu and UV > Snap menu.
Differential Revision: https://developer.blender.org/D15055
|
|
The menu/popover doesn't affect anything in the mode, and precision
operations that would use snapping are meant for edit mode anyway.
|
|
Although e.g. in the dopesheet there is no specific concept of
active action, displaying panels requires singling out one action
reference. It is more efficient and clearer to implement this
natively in the context rather than using selected_visible_actions[0].
- In the Action Editor the action is taken from the header.
- In the Dope Sheet the first selected action is chosen, because
there is no concept of an active channel or keyframe.
- In the Graph Editor the action associated with the active curve
is used, which should also be associated with the active vertex.
This case may be different from selected_visible_actions[0].
Differential Revision: https://developer.blender.org/D15412
|
|
The tooltips from the Add Node menu were extracted, but not translated.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15467
|
|
openSubdiv_init() would detect available evaluators before any OpenGL context
exists, causing a crash with libepoxy. This test however is redundant as we
already check the requirements on the Blender side through the GPU API.
To simplify things, completely remove the device detection in the opensubdiv
module and reduce the evaluators to just CPU and GPU. The plan here is to move
to the GPU module abstraction over OpenGL/Metal/Vulkan and so all these
different backends no longer make sense.
This also removes the user preference for OpenSubdiv compute device, which was
not used for the new GPU subdivision implementation.
Ref D15291
Differential Revision: https://developer.blender.org/D15470
|
|
This is useful when using an armature as a camera rig, to avoid creating and
targetting an empty object.
Differential Revision: https://developer.blender.org/D7012
|
|
* Don't nest "Show Recent Locations" and "Show System Locations" under a
"Defaults" heading. They are not just a default setting but completely
hide panels from the UI.
* Use own "Show Locations" heading instead, and remove redundant words
from labels.
* Move the options to the top of the panel, they are more general since
they can't be toggled in a File Browser session, and thus have bigger
impact.
We may want to remove these options in a future major release, I don't
think they are useful.
Agreed on with Pablo Vazquez.
|
|
Differential Revision: https://developer.blender.org/D15411
|
|
|
|
|
|
This commit doesn't implement any new feature but makes the new curves
object type no longer experimental.
Documentation:
* https://docs.blender.org/manual/en/3.3/modeling/curves/primitives.html#empty-hair
* https://docs.blender.org/manual/en/3.3/sculpt_paint/curves_sculpting/introduction.html
Note: This also makes the Selection Paint tool available. This tool
should have been moved out of the "New Curves Tool" flag when we got the
selection drawing to work.
Differential Revision: https://developer.blender.org/D15402
|
|
Curves that are attached to a surface can now follow the surface when
it is modified using shape keys or modifiers (but not when the original
surface is deformed in edit or sculpt mode).
The surface is allowed to be changed in any way that keeps uv maps
intact. So deformation is allowed, but also some topology changes like
subdivision.
The following features are added:
* A new `Deform Curves on Surface` node, which deforms curves with
attachment information based on the surface object and uv map set
in the properties panel.
* A new `Add Rest Position` checkbox in the shape keys panel. When checked,
a new `rest_position` vector attribute is added to the mesh before shape
keys and modifiers are applied. This is necessary to support proper
deformation of the curves, but can also be used for other purposes.
* The `Add > Curve > Empty Hair` operator now sets up a simple geometry
nodes setup that deforms the hair. It also makes sure that the rest
position attribute is added to the surface.
* A new `Object (Attach Curves to Surface)` operator in the `Set Parent To`
(ctrl+P) menu, which attaches existing curves to the surface and sets the
surface object as parent.
Limitations:
* Sculpting the procedurally deformed curves will be implemented separately.
* The `Deform Curves on Surface` node is not generic and can only be used
for one specific purpose currently. We plan to generalize this more in the
future by adding support by exposing more inputs and/or by turning it into
a node group.
Differential Revision: https://developer.blender.org/D14864
|
|
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15392
|
|
|
|
This is temporary to investigate which behavior should be kept when
creating an override hierarchy if there are no cherry-picked data
defined: make all overrides user-editable, or not.
This removes the 'make override - fully editable' menu entries.
|
|
Adds a "Pin Scene" option to the workspace. When activated, the workspace will
remember the scene that was last activated in it, so that when switching back
to this workspace, the same scene will be reactivated. This is important for a
VSE workflow, so that users can switch between different workspaces displaying
a scene and thus a timeline for a specific task.
The option can be found in the Properties, Workspace tab. D11890 additionally
adds an icon for this to the scene switcher in the topbar.
The workspace data contains a pointer to the scene which is a UI to scene data
relation. When appending a workspace, the pointer is cleared.
Differential Revision: https://developer.blender.org/D9140
Reviewed by: Brecht Van Lommel, Bastien Montagne (no final accept, but was fine
with the general design earlier)
|
|
This commit adds visualization to the selection in curves sculpt mode.
Previously it was only possible to see the selection when it was
connected to a material.
In order to obstruct the users vision as little as possible, the
selected areas of the curve are left as is, but a dark overlay
is drawn over unselected areas.
To make it work, the overlay requests the selection attribute and then
ensures that the evaluation is complete for curves. Then it retrieves
the evaluated selection GPU texture and passes that to the shader.
This reuses the existing generic attribute extraction system because
there currently wouldn't be any benefits to dealing with selection
separately, and because it avoids duplication of the logic that
extracts attributes from curves and evaluates them if necessary.
Differential Revision: https://developer.blender.org/D15219
|
|
This change the 'Purge' button of the Outliner 'Orphaned' view to use
recursive purge, i.e. it wil not only delete immediately unused IDs (as
listed in the view) anymore, but also all their unused dependencies.
|
|
|
|
|
|
By now I'm not aware of any serious regressions or missing functionality
in the C++ based OBJ importer/exporter. They have more features (vertex colors
support), and are way faster than the Python based importer/exporter.
Reviewed By: Thomas Dinges, Howard Trickey
Differential Revision: https://developer.blender.org/D15360
|
|
This reverts commit 9bb2afb55e50f9353cfc76cf2d8df7521b0b5feb.
Oops, did not intend to commit this to master.
|
|
This is the start of a geometry node to do edge, vertex, and face
bevels.
It doesn't yet do anything but analyze the "Vertex cap" around
selected vertices for vertex bevel.
|
|
* Minimum Distance -> Distance Mix
* Max Count -> Count Max
* Shift + A for selection grow
This follows better the names we have in geometry nodes in the Distribute Points
node when using the Poisson Disk method (Distance Min, Distance Max).
The shortcut for the selection grow is the same we use in mesh sculpt
for the Expand Mask operator (which behaves a bit similar).
|
|
There are two operators added, which are available via a special
content menu next to the plane track image selector:
- New Image from Plane Marker
- Update Image from Plane Marker
The former one creates an image from pixels which the active plane
track marker "sees" at the current frame and sets it as the plane
track's image.
The latter one instead of creating the new image data-block updates
the image in-place.
This allows to create unwarped texture from a billboard from footage.
The intent is to allow this image to be touched up and re-projected
back to the footage with an updated content.
Available from a plane track image context menu, as well as from the
Track menu.
{F13243219}
The demo of the feature from Sebastian Koenig: https://www.youtube.com/watch?v=PDphO-w2SsA
Differential Revision: https://developer.blender.org/D15312
|
|
This modules handles renderpasses allocation and filling. Also handles
blitting to viewport framebuffer and render result reading.
Changes against the old implementation:
- the filling of the renderpasses happens all at once requiring
only 1 geometry pass.
- The filtering is optimized with weights precomputed on CPU and
reuse of neighboor pixels.
- Only one accumulation buffer for renderpasses (no ping-pong).
- Accumulation happens in one pass for every passes using a single
dispatch or fullscreen triangle pass.
TAA and history reprojection is not yet implemented.
AOVs support is present but with a 16 AOV limit for now.
Cryptomatte is not yet implemented.
|
|
This commit contains various new features for curves sculpt mode
that have been developed in parallel.
* Selection:
* Operator to select points/curves randomly.
* Operator to select endpoints of curves.
* Operator to grow/shrink an existing selection.
* New Brushes:
* Pinch: Moves points towards the brush center.
* Smooth: Makes individual curves straight without changing the root
or tip position.
* Puff: Makes curves stand up, aligning them with the surface normal.
* Density: Add or remove curves to achieve a certain density defined
by a minimum distance value.
* Slide: Move root points on the surface.
Differential Revision: https://developer.blender.org/D15134
|
|
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
|
|
This is an exploration of how geometry nodes might be coupled with
rigid bodies and iterative simulations in general. It's a very
rough-and-ready implementation, not meant as a final version, but rather
to prove the possiblity and to find challenging areas where redesign is
needed.
The core additions are:
- Geometry nodes to flag points and/or instances as rigid bodies.
- Depsgraph integration to ensure the necessary order of operations
between modifiers and rigid body pre/post simulation updates.
- Simple cache feature to store arbitrary geometry and loop back into
the next iteration.
|
|
This commit adds new Unwrap and Pack Islands nodes, with equivalent
functionality to the existing Unwrap and Pack Islands operators. The
Unwrap node uses generic boolean attributes to determine seams instead
of looking at the seam flags in the mesh geometry.
Unlike the Unwrap operator, the Unwrap node doesn't perform aspect
ratio correction, because this is trivial for the user to implement
with a Vector Math node if it is desired.
The Unwrap node implicitly performs a Pack Islands operation upon
completion, because the results may not be generally useful otherwise.
This matches the behaviour of the Unwrap operator.
The nodes use the existing Vector socket type, and do not introduce a
new 2D Vector type (see T92765).
Differential Revision: https://developer.blender.org/D14389
|
|
This adds a Mesh To Volume Node T86838 based on the existing modifier.
The mesh to volume conversion is implemented in the geometry module,
and shared between the node and the modifier.
Currently the node outputs a grid with the name "density". This may
change in the future depending on the decisions made in T91668.
The original patch was by Kris (@Metricity), further implementation
by Geramy Loveless (@GeramyLoveless), then finished by Erik Abrahamsson
(@erik85).
Differential Revision: https://developer.blender.org/D10895
|
|
This patch includes the full shadow functionality for LineArt:
- Light contour and cast shadow lines.
- Lit/shaded region selection.
- Enclosed light/shadow shape calculation.
- Silhouette/anti-silhouette selection.
- Intersection priority based on shadow edge identifier.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15109
|
|
Patch implements better way to control playback speed than it is
possible to do with speed effect. Speed factor property can be set in
Time panel.
There are 2 layers of control:
Option to retime movie to match scene FPS rate.
Custom speed factor to control playback rate.
Since playback rate is strip property, it is now possible to manipulate
strip as normal one even if it is retimed.
To facilitate manipulation, some functions need to consider speed factor
and apply necessary corrections to strip offset or strip start. These
corrections may need to be float numbers, so start and offsets must be
float as well.
Sound strips now use speed factor instead of pitch. This means, that
strips will change length to match usable length. In addition, it is
possible to group movie and sound strip and change speed of meta strip.
|
|
This makes no sense to hide it since we can nowadays preview it inside the
viewport even if the render pass is not enabled.
|
|
The mask is expected to be always be displayed smooth, and the
option mainly existed for some legacy drivers. IF smooth drawing
causes issues it should be fixed in the drawing code, not as an
option in the interface.
Differential Revision: https://developer.blender.org/D15266
|
|
Show a custom properties panel in the collections tab,
matching other data-blocks which already support this.
Reviewed by: HooglyBoogly, campbellbarton
Ref D12598
|
|
Caused warning on startup, missing from [0].
[0]: 57816a6435c3a6efc98c575ec0a02ad0dd07622c
|
|
The preview data was not available in this context and need to be checked to avoid the warning.
|
|
As described in T98943, this commit adds a node that can
evaluate a field on a separate domain in a larger field context.
This is potentially useful in many cases, to avoid relying on
a separate capture attribute node, which can make it easier
to build reusable fields that don't need geometry inputs.
Internally, the node just evaluates the input field in the larger
field context and then uses the generic domain interpolation,
so the code is simple. One future optimization might be using
the input selection to only evaluate part of the input field, but
then the selection has to be interpolated as well, and that might
not always be worth it.
Differential Revision: https://developer.blender.org/D15289
|
|
This node takes a point count,a vector field, and float field and creates
a pointcloud with n points at the positions indicated in the vector
field with the radii specified in the float field.The node is placed in
the "Point" menu.
Differential Revision: https://developer.blender.org/D13920
Maniphest Task: https://developer.blender.org/T93044
|
|
|
|
All of the operators in vertex paint mode didn't work properly with
the new color attribute system. They only worked on byte color type
attributes on the face corner domain.
Since there are four possible combinations of domains and types now,
it mostly ended up being simpler to convert the code to C++ and use
the geometry component API for retrieving attributes, interpolating
between domains, etc. The code changes ended up being fairly large,
but the result should be simpler now.
Differential Revision: https://developer.blender.org/D15261
|
