| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This moves the flash on mode transfer effect option from the overlays to
an operator property of the mode transfer operator.
- This effect is intended to show the target object when no overlays or
a minimal set of overlays is enabled. Making it part of the whole set of
overlays invalidates this use case.
- The effect is not intended to be configurable per viewport, it should
be a global option.
The effect is still implemented using the overlay engine (instead of a
draw modal callback) due to performance and drawing artifacts. Having it
implemented as an overlay with runtime timer data in the objects makes
also possible to run multiple animations at the same time without any
visual glitches.
Reviewed By: campbellbarton, JulienKaspar
Differential Revision: https://developer.blender.org/D11519
|
|
Note: Linking in this case as in link vs. append. Easily confused with linking
a data-block to multiple usages (e.g. single material used by multiple
objects).
Adds a drop-down to the Asset Browser header to choose between Link and Append.
This is probably gonna be a temporary place, T54642 shows where this could be
placed eventually.
Linking support is crucial for usage of the asset browser in production
environments. It just wasn't enabled yet because a) the asset project currently
focuses on single user, not production assets, and b) because there were many
unkowns still for the workflow that have big impact on production use as well.
With the recently held asset workshop I'm more confident with enabling linking,
as design ideas relevant to production use were confirmed.
Differential Revision: https://developer.blender.org/D11536
Reviewed by: Bastien Montagne
|
|
|
|
This commit adds a node to output the convex hull of any input geometry
as a mesh, which is an enclosing geometry around a set of points.
All geometry types are supported, besides volumes.
The code supports operating on instances to avoid copying all input
geometry before the operation. The implementation uses the same backend
as the operation in edit mode, but uses Mesh directly instead of BMesh.
Attribute transfer is not supported currently, but would be a point of
improvement for the future if it can work in a predictable way on
different geometry input types.
Differential Revision: https://developer.blender.org/D10925
|
|
Some tools don't use brush and the panel must be hidden.
Reviewed By: mendio
Differential Revision: https://developer.blender.org/D11518
|
|
Use keyword only arguments for the following functions.
- addon_utils.module_bl_info 2nd arg `info_basis`.
- addon_utils.modules 1st `module_cache`, 2nd arg `refresh`.
- addon_utils.modules_refresh 1st arg `module_cache`.
- bl_app_template_utils.activate 1nd arg `template_id`.
- bl_app_template_utils.import_from_id 2nd arg `ignore_not_found`.
- bl_app_template_utils.import_from_path 2nd arg `ignore_not_found`.
- bl_keymap_utils.keymap_from_toolbar.generate 2nd & 3rd args `use_fallback_keys` & `use_reset`.
- bl_keymap_utils.platform_helpers.keyconfig_data_oskey_from_ctrl 2nd arg `filter_fn`.
- bl_ui_utils.bug_report_url.url_prefill_from_blender 1st arg `addon_info`.
- bmesh.types.BMFace.copy 1st & 2nd args `verts`, `edges`.
- bmesh.types.BMesh.calc_volume 1st arg `signed`.
- bmesh.types.BMesh.from_mesh 2nd..4th args `face_normals`, `use_shape_key`, `shape_key_index`.
- bmesh.types.BMesh.from_object 3rd & 4th args `cage`, `face_normals`.
- bmesh.types.BMesh.transform 2nd arg `filter`.
- bmesh.types.BMesh.update_edit_mesh 2nd & 3rd args `loop_triangles`, `destructive`.
- bmesh.types.{BMVertSeq,BMEdgeSeq,BMFaceSeq}.sort 1st & 2nd arg `key`, `reverse`.
- bmesh.utils.face_split 4th..6th args `coords`, `use_exist`, `example`.
- bpy.data.libraries.load 2nd..4th args `link`, `relative`, `assets_only`.
- bpy.data.user_map 1st..3rd args `subset`, `key_types, `value_types`.
- bpy.msgbus.subscribe_rna 5th arg `options`.
- bpy.path.abspath 2nd & 3rd args `start` & `library`.
- bpy.path.clean_name 2nd arg `replace`.
- bpy.path.ensure_ext 3rd arg `case_sensitive`.
- bpy.path.module_names 2nd arg `recursive`.
- bpy.path.relpath 2nd arg `start`.
- bpy.types.EditBone.transform 2nd & 3rd arg `scale`, `roll`.
- bpy.types.Operator.as_keywords 1st arg `ignore`.
- bpy.types.Struct.{keyframe_insert,keyframe_delete} 2nd..5th args `index`, `frame`, `group`, `options`.
- bpy.types.WindowManager.popup_menu 2nd & 3rd arg `title`, `icon`.
- bpy.types.WindowManager.popup_menu_pie 3rd & 4th arg `title`, `icon`.
- bpy.utils.app_template_paths 1st arg `subdir`.
- bpy.utils.app_template_paths 1st arg `subdir`.
- bpy.utils.blend_paths 1st..3rd args `absolute`, `packed`, `local`.
- bpy.utils.execfile 2nd arg `mod`.
- bpy.utils.keyconfig_set 2nd arg `report`.
- bpy.utils.load_scripts 1st & 2nd `reload_scripts` & `refresh_scripts`.
- bpy.utils.preset_find 3rd & 4th args `display_name`, `ext`.
- bpy.utils.resource_path 2nd & 3rd arg `major`, `minor`.
- bpy.utils.script_paths 1st..4th args `subdir`, `user_pref`, `check_all`, `use_user`.
- bpy.utils.smpte_from_frame 2nd & 3rd args `fps`, `fps_base`.
- bpy.utils.smpte_from_seconds 2nd & 3rd args `fps`, `fps_base`.
- bpy.utils.system_resource 2nd arg `subdir`.
- bpy.utils.time_from_frame 2nd & 3rd args `fps`, `fps_base`.
- bpy.utils.time_to_frame 2nd & 3rd args `fps`, `fps_base`.
- bpy.utils.units.to_string 4th..6th `precision`, `split_unit`, `compatible_unit`.
- bpy.utils.units.to_value 4th arg `str_ref_unit`.
- bpy.utils.user_resource 2nd & 3rd args `subdir`, `create`
- bpy_extras.view3d_utils.location_3d_to_region_2d 4th arg `default`.
- bpy_extras.view3d_utils.region_2d_to_origin_3d 4th arg `clamp`.
- gpu.offscreen.unbind 1st arg `restore`.
- gpu_extras.batch.batch_for_shader 4th arg `indices`.
- gpu_extras.batch.presets.draw_circle_2d 4th arg `segments`.
- gpu_extras.presets.draw_circle_2d 4th arg `segments`.
- imbuf.types.ImBuf.resize 2nd arg `resize`.
- imbuf.write 2nd arg `filepath`.
- mathutils.kdtree.KDTree.find 2nd arg `filter`.
- nodeitems_utils.NodeCategory 3rd & 4th arg `descriptions`, `items`.
- nodeitems_utils.NodeItem 2nd..4th args `label`, `settings`, `poll`.
- nodeitems_utils.NodeItemCustom 1st & 2nd arg `poll`, `draw`.
- rna_prop_ui.draw 5th arg `use_edit`.
- rna_prop_ui.rna_idprop_ui_get 2nd arg `create`.
- rna_prop_ui.rna_idprop_ui_prop_clear 3rd arg `remove`.
- rna_prop_ui.rna_idprop_ui_prop_get 3rd arg `create`.
- rna_xml.xml2rna 2nd arg `root_rna`.
- rna_xml.xml_file_write 4th arg `skip_typemap`.
|
|
This node creates a boolean face attribute that is "true" for
every face that has the given material.
Differential Revision: https://developer.blender.org/D11324
|
|
Since Limit Rotation is based on Euler decomposition, it should allow
specifying the order to use for the same reasons as Copy Rotation does,
namely, if the bone uses Quaternion rotation for its animation channels,
there is no way to choose the order for the constraint.
Ref D9626
|
|
|
|
Fixed the logic for seeking in ffmpeg video files.
The main fix is that we now apply a small offset in ffmpeg_get_seek_pos
to make sure we don't get the frame in front of the seek position when
seeking backward.
The rest of the changes is general cleanup and untangling code.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11492
|
|
The icon has been changed to `eye` because is more consistent with other areas.
|
|
The icon has been changed to `eye` because is more consistent with other areas.
|
|
These were only showing in the Properties Editor, but there is no reason
to have the panels be different in the sidebar (they should not show in
the top bar though).
agreed upon by both @anoniov and @mendio
ref T88787
|
|
This commit adds a node that outputs the total length of all
evalauted curve splines in a geometry set as a float value.
Differential Revision: https://developer.blender.org/D11459
|
|
This implements T87633
This overlay renders a flash animation on the target object when
transfering the mode to it using the mode transfer operator.
This provides visual feedback when switching between objects without
extra overlays that affect the general color and lighting in the scene.
Differences with the design task:
- This uses just a fade out animation instead of a fade in/out animation.
The code is ready for fade in/out, but as the rest of the overlays
(face sets, masks...) change instantly without animation, having a fade
in/out effect gives the impression that the object flashes twice (once
for the face sets, twice for the peak alpha of the flash animation).
- The rendering uses a flat color without fresnel for now, but this can
be improved in the future to make it look more like the shader in the
prototype.
- Not enabled by default (can be enabled in the overlays panel), maybe
the defaults can change for 3.0 to disable fade inactive and enable this
instead.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D11055
|
|
Proxies doesn't use MJPEG codec anymore, but text still referenced it.
|
|
Sometimes is required to reset the thickness or the opacity of the strokes. Actually this was done using a modifier, but this operators solves this.
Reviewed By: mendio, filedescriptor
Maniphest Tasks: T87427
Differential Revision: https://developer.blender.org/D11453
|
|
This node is similar to the mask modifier, but it deletes the elements
of the geometry corresponding to the selection, which is retrieved as
a boolean attribute. The node currently supports both mesh and point
cloud data. For meshes, which elements are deleted depends on the
domain of the input selection attribute, just like how behavior depends
on the selection mode in mesh edit mode.
In the future this node will support curve data, and ideally volume
data in some way.
Differential Revision: https://developer.blender.org/D10748
|
|
This patch adds the base code needed to make the full-frame system work for both current tiled/per-pixel implementation of operations and full-frame.
Two execution models:
- Tiled: Current implementation. Renders execution groups in tiles from outputs to input. Not all operations are buffered. Runs the tiled/per-pixel implementation.
- FullFrame: All operations are buffered. Fully renders operations from inputs to outputs. Runs full-frame implementation of operations if available otherwise the current tiled/per-pixel. Creates output buffers on first read and free them as soon as all its readers have finished, reducing peak memory usage of complex/long trees. Operations are multi-threaded but do not run in parallel as Tiled (will be done in another patch).
This should allow us to convert operations to full-frame in small steps with the system already working and solve the problem of high memory usage.
FullFrame breaking changes respect Tiled system, mainly:
- Translate, Rotate, Scale, and Transform take effect immediately instead of next buffered operation.
- Any sampling is always done over inputs instead of last buffered operation.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11113
|
|
|
|
Now FPS is displayed in the video source for videos to provide easy
access.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11441
|
|
The same code existed in 2.82 and earlier so this should be safe. Removing the
custom implementation of shutil.copytree in f34d5d9 did not correctly add back
the option to copy symlinks.
|
|
|
|
This node creates poly curve splines from mesh edges. A selection
attribute input allows only using some of the edges from the mesh.
The node builds cyclic splines from branchless groups of edges where
possible, but when there is a three-way intersection, the spline stops.
The node also transfers all attributes from the mesh to the resulting
control points. In the future we could add a way to limit that to a
subset of the attributes to improve performance.
The algorithm is from Animation Nodes, written by @OmarSquircleArt.
I added the ability to use a selection, attribute transferring, and
used different variable names, etc, but other than that the algorithm
is the same.
Differential Revision: https://developer.blender.org/D11265
|
|
|
|
Added missing topbar in VSE.
Also added the Stabilizer options to Topbar for all modes.
Reviewed By: mendio, pepeland
Maniphest Tasks: T86465
Differential Revision: https://developer.blender.org/D11347
|
|
The newly added `disable_masks_viewlayer` RNA property did not conform
with the RNA naming scheme. This renames it to `use_viewlayer_masks`.
|
|
This patch adds an option in the Layers > Relations panel called "Disable Masks in Render".
When checked, no masks on this layer are included in the render.
Example:
| {F10087680} | {F10087681} |
See T88202 for why this is needed.
Reviewed By: antoniov
Maniphest Tasks: T88202
Differential Revision: https://developer.blender.org/D11234
|
|
This operator is a common request of animators to convert the transformation (inluding modifiers) of one grease pencil object, into a new object, generating strokes.
Reviewed By: pepeland
Maniphest Tasks: T87424
Differential Revision: https://developer.blender.org/D11014
|
|
Volumes are supported, poll corrected.
Maniphest Tasks: T88534
Differential Revision: https://developer.blender.org/D11378
|
|
Convert curve vec and curve rgb shader nodes to geometry nodes, based on node_shader_valToRgb.cc implementation.
|
|
|
|
Accessing data through RNA should never implicitely create it. Objects'
and particles' forcefields and collision settings were doing this.
Note that UI code also had to be tweaked to properly handle `None`
(NULL) cases.
Differential Revision: https://developer.blender.org/D11341
|
|
This node can change all faces that use a specific material to use a
different material. Using this node is significantly more efficient
than creating a selection from all faces with a specific material
index and then using the Material Assign node.
Ref T88055.
Differential Revision: https://developer.blender.org/D11325
|
|
|
|
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
|
|
Since version 2.80, the annotations of the Scene strip were not displayed in VSE. Also, the UI panel was`Grease Pencil` and must be `Annotation`
The problem was the offscreen render hasn't evil_CTX and the section of the annotation was never called.
Differential Revision: https://developer.blender.org/D11329
|
|
This node is similar to the Value and Vector node.
It just provides a way to use the same material in multiple nodes
without exposing it outside of a node group.
Differential Revision: https://developer.blender.org/D11305
|
|
This adds a new Material Assign node. It can be used to change the
material used by an existing mesh or to assign a material to a mesh
that has been generated from scratch.
Differential Revision: https://developer.blender.org/D11155
|
|
Without this, menu search prints many errors in some contexts.
|
|
|
|
|
|
|
|
- Used try/except instead of a poll function.
- The error case referenced a non-existent error handling module.
Prefer poll functions over exception handling where possible,
also having an operators logic in a try block isn't good practice
as it can hide more serious errors in the code.
Note that duplicate pencil settings access should be moved into a
utility function. This can be part of a separate cleanup.
|
|
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11249
|
|
|
|
context menu
Collection holdouts are now supported by eevee.
Maniphest Tasks: T87715
Differential Revision: https://developer.blender.org/D11233
|
|
Now the operators work like other areas of Blender using the list of selected objects.
Also, the name has been changed to:
```Layers:
- Copy Layer to Selected
- Copy All Layers to Selected
Materials:
- Copy Material to Selected
- Copy All Materials to Selected```
Reviewed By: mendio, pablovazquez, pepeland
Differential Revision: https://developer.blender.org/D11216
|
|
'Preferences' is the term used elsewhere in Blender so this commit makes
the option more consistent.
In the future, the "default" target could be changed to something more
descriptive.
|
