| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This patch builds on the work from bdb57541475f to add node group
assets directly in the node editor add menu. Assets are added after
separators to distinguish them, but otherwise they look like any other
node. The catalog trees from all configured libraries are used to build
the menu hierarchy. Only catalogs with matching asset types are used
though.
There are a few limitations of this initial version. For now this only
supports geometry nodes. Support for other built-in node systems just
requires some refactoring of the corresponding add menu though. Lazy
loading will be added in a followup commit. For now there is a label
the first time the menu is opened.
Like the search menu integration, re-saving asset library files in 3.4
is required, if it hasn't been done already.
Implementation wise, there is a some ugly code here. A lot of that is
because the asset system isn't complete. The RNA API doesn't work well
yet, and the system isn't built to interact with multiple libraries at
once. It's also ugly because of the way we combine automatic menu
generation with builtin menus. As noted in a code comment, these two
systems could be merged completely so that the menus for builtin nodes
are also generated in the same way.
Differential Revision: https://developer.blender.org/D16135
|
|
When pinning a Mesh, we cannot rely on the context object.
Instead, use the context mesh now.
For vertexgroups names [which are still on the object API wise], this
means name collisions cannot be checked when pinning a Mesh (so print
this as a warning in that case)
Maniphest Tasks: T102045
Differential Revision: https://developer.blender.org/D16333
|
|
Previously, the Blender video renderer did not have support for
encoding video to AV1 (not to be confused with the container AVI).
The proposed solution is to leverage the existing FFMpeg renderer
to encode to AV1.
Note that avcodec_find_encoder(AV_CODEC_ID_AV1) usually returns
"libaom-av1" which is the "reference implementation" for AV1 encoding
(the default for FFMpeg, and is slow). "libsvtav1" is faster and
preferred so there is extra handling when fetching the AV1 codec for
encoding such that "libsvtav1" is used when possible.
This commit should only affect the options available for video
rendering, which includes the additional AV1 codec to choose from, and
setting "-crf".
Also note that the current release of FFMpeg for ArchLinux does not
support "-crf" for "libsvtav1", but the equivalent option "-qp" is
supported and used as a fallback when "libsvtav1" is used (as
mentioned here: https://trac.ffmpeg.org/wiki/Encode/AV1#SVT-AV1 ).
(Actually, both "-crf" and "-qp" is specified with the same value in
the code. When a release of FFMpeg obtains support for "-crf" for
"libsvtav1" is released, the code shouldn't be needed to change.)
The usage of the AV1 codec should be very similar to the usage of the
H264 codec, but is limited to the "mp4" and "mkv" containers.
This patch pertains to the "VFX & Video" module, as its main purpose
is to supplement the Video Sequencer tool with the additional AV1
codec for encoded video output.
Differential Revision: https://developer.blender.org/D14920
Reviewed By: sergey , ISS, zeddb
|
|
The users had to type in a name here, but we can also make it a dropdown
choice with existing UV Maps for convenience:
- dont have to remember a name or copy paste obviously
- shows in red if it was removed / invalid
Came up in T101028
Maniphest Tasks: T101028
Differential Revision: https://developer.blender.org/D15956
|
|
For consistency with other brush based (paint) systems we should add
these entries in the brushes context menu.
For this, expose the brushes `ob_mode` to RNA and show this (along with
the tool choice) to the appropriate menus.
Differential Revision: https://developer.blender.org/D16287
|
|
This was added in rB4c9fe657458f, however that new code never used this
menu (but the existing `VIEW3D_MT_brush_paint_modes` instead).
Differential Revision: https://developer.blender.org/D16285
|
|
Add auto-masking as a popover in the header while in Sculpt mode,
following the design in T101593.
These properties were present in the Options panel (and popover),
they have been removed from there.
Moreover, this commit makes the auto-masking section in Brush settings
match the new popover.
In the future this popover can be used for other modes that support
auto-masking such as Grease Pencil.
See D16145 for details and screenshots.
Reviewed By: JulienKaspar
Differential Revision: https://developer.blender.org/D16145
|
|
This operator (Alt + D) allows users to explicitly create a linked copy
of a group node (same current behaviour for the Duplicate operator).
The duplicate operator (Shift + D) now takes the new User Preference
duplicate data option for Node Tree into account. It is by default
disabled, leading to no functional change for users.
Although we could make in the future make this option "on" by default,
to make it consistent with the rest of Blender we do not at the time.
Differential Revision: https://developer.blender.org/D16210
|
|
Even though this was intentionally removed in [0], loading data from
older startup files is supported. So show them when available.
[0]: 45439dfe4c05eabaa83d0c1b75463966b5ba896d
|
|
|
|
This change is part of a wider set of changes to implement Grid and Pixel
snapping in the UV Editor. This particular change adds a new third option,
`pixel grid`, to the previous grid options, `dynamic grid` and `fixed grid`.
Maniphest Tasks : T78391
Differential Revision: https://developer.blender.org/D16197
|
|
In 22c3db72ca2f `SHOW_ALL` has been removed from
`face_set_change_visibility`. Instead `SCULPT_OT_reveal_all` is now used
for unhiding all face sets.
Reviewed By: Joseph Eagar & Julian Kaspar
Differential Revision: https://developer.blender.org/D16199
Ref D16199
|
|
Disambiguate:
- "Active Only" (GPencil copy material and layer, add NLA modifier)
- "Clip" (movie clip, image extension mode)
- "Emission" (particles)
- "New" (scene)
- "Tracking" (movie clip)
Extract:
- "ViewLayer", the default view layer name when creating new scene
Ref T43295
Reviewed By: mont29
Maniphest Tasks: T43295
Differential Revision: https://developer.blender.org/D16196
|
|
Show the windowing environment on non MS-Windows/Apple systems,
since X11/WAYLAND are selected startup there was no convenient way
for users to know which back-end was being used.
Include the windowing environment in the About splash & system-info.txt
since it will be useful for handling bug reports.
This commit adds a private API call not intended for general use
as I would like to be able to remove this later and it's only needed
in the specific case of testing if Blender is using WAYLAND or X11
(which maybe be used via XWayland).
Python scripts can already inspect the system to check which windowing
environment used, the API call is mainly useful for troubleshooting.
|
|
When app-templates are enabled, support resetting defaults only for the
app-templates.
Without this, it's not possible to reset app-template preferences
without also resetting the default preferences for all settings the
app-template does not override (used when there is no application
template loaded, and other app-templates).
These additional menu items are shown in menus when an app-template has
been loaded.
Address issue raised by T96427.
Reviewed By: mont29, brecht
Ref D16150
|
|
Aftermath of rBf5d67f3fdf2d and rBa096248d1253, from D16159 (did not
apply direclty).
|
|
layout.menu does not have a text_context argument.
f5d67f3fdf2ddec073898bc60feeb2440f2c1b30
|
|
layout.menu does not have a text_context argument.
f5d67f3fdf2ddec073898bc60feeb2440f2c1b30
|
|
Unfortunately this commit changed behavior in a fundamental way that
can't be addressed without larger changes. Previously the position
outputs were evaluated on the edge domain and then interpolated to the
context domain, which could be useful for some rudimentary mesh smoothing.
After the commit they were just evaluated at the specified index, which
looks practically random when evaluated on a different domain. We may need
a new node that doesn't have the implicit behavior in the future.
This reverts commit 4ddc5a936e07129aaf94ed7d188b8f5f5ea14085.
|
|
Caused by 837144b4577f161baf1625f8a5478c83a088ea0f
|
|
- Active Track (NLA vs movie clip)
- New (file)
- Object Index (loop cut)
- Object Index (render pass)
- Proxy Storage (sequence)
- Rim (Solidify modifier)
- Roughness (particle children)
- Spaces (text whitespace)
- Out (sequencer wipe transition)
Also make new asset tag name translatable.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16067
|
|
To the user, this looks like a disfunctional thing (usually greying out
is used for props having no effect).
The greying out is caused by
{rB8b7cd1ed2a17e40661101eea4adae99e8e3d02e9}.
Above commit disabled the direct renaming of images in the
`TEXTURE_UL_texpaintslots` UIList (and instead displays the texture slot
directly as a prop -- which has its `PROP_EDITABLE` flag cleared)
(from the commit message):
> A limitation of this patch is that is isn't possible anymore to rename
images directly from
> the selection panel. This is currently allowed in master. But as
CustomDataLayers
> aren't ID fields and not owned by the material supporting this wouldn't
be easy.
To work around the UI confusion (but still keep the non-editable nature
of the property), now just display this as a label.
Maniphest Tasks: T101334
Differential Revision: https://developer.blender.org/D16138
|
|
Previously the edge index was always determined by the field context,
and the node didn't work when the context was in any other domain.
Adding an index input makes it work much more nicely with the other
topology nodes. It's now in the topology submenu too.
I also reimplemented the edge positions input to use the field at index
node internally. That will probably make it slower for now, but we need
to optimize that to do nothing in some special cases anyway.
Differential Revision: https://developer.blender.org/D16105
|
|
Rename the node to "Offset Point in Curve"
Since this was committed, more mesh and curve topology nodes have been
committed with a different naming scheme (482d431bb6735e82069). Change
the name of this node to match "Offset Corner in Face". Because the
node was only added recently, it's a full rename, including the ID,
so forward compatibility is broken.
|
|
This node allows for curves to have their evaluated normal mode changed
between MINIMUM_TWIST and Z_UP. A selection input allows for choosing
which spline in the curves object will be affected.
Differential Revision: D16118
|
|
This node allows sampling an attribute on a mesh surface based
on a UV coordinate. Internally, this has to do a "reverse uv lookup",
i.e. the node has to find the polygon that corresponds to the uv
coordinate. Therefore, the uv map of the mesh should not have
overlapping faces.
Differential Revision: https://developer.blender.org/D15440
|
|
|
|
After a lot of testing, this option is not required and
now this is managed by stroke_collsion.
If the stroke_collision is enabled, only collide strokes
are used.
|
|
This was a regression introduced after the 3.3 release.
This fix T101452
|
|
Two new normal-based automasking modes.
The first mode, "brush", compares vertex normals with the initial
normal at the beginning of the brush stroke.
The second, "view", compares vertex normals with the view normal.
If "occlusion" is on then rays will be shot from each vertex to test
if it is occluded by other geometry (note: this can be very slow).\
Only geometry inside the sculpt mesh is considered.
Each mode has an associated angular limit and a falloff.
Reviewed by: Julien Kaspar and Jeroen Bakker
Differential Revision: https://developer.blender.org/D15297
Ref D15297
|
|
|
|
Add new cavity automasking mode based on local mesh
curvature. Cavity masking is a great way to quickly add
detail in crevices and the like. It's meant to be used
with the Paint brush in color attribute mode. It does
work with other brushes but the results can be unpredictable.
{F13131497}
The old "dirty mask" operator has been replace with a new
"mask from cavity" operator that shares the same code with
cavity automasking.
Differences from the sculpt-dev implementation:
* It uses the word "cavity." When I first implemented
this I wasn't aware
this feature existed in other software (and other
paint modes in Blender),
and for reasons that escape me today I initially
decided to call it a concave or
concavity mask.
* The cavity factor works a bit differently. It's
no longer non-linear and functions as a simple
scale around 0.5f.
* Supports custom curves.
* Supports blurring.
Reviewed By: Julian Kaspar, Jeroen Bakker and Campbell Barton
Differential Revision: https://developer.blender.org/D15122
Ref D15122
|
|
This patch contains an initial set of nodes to access basic
mesh topology information, as explored in T100020.
The nodes allow six direct topology mappings for meshes:
- **Corner -> Face** The face a corner is in, the index in the face
- **Vertex -> Edge** Choose an edge attached to the vertex
- **Vertex -> Corner** Choose a corner attached to the vertex
- **Corner -> Edge** The next and previous edge at each face corner
- **Corner -> Vertex** The vertex associated with a corner
- **Corner -> Corner** Offset a corner index within a face
And two new topology mappings for curves:
- **Curve -> Points** Choose a point within a curve
- **Point -> Curve** The curve a point is in, the index in the curve
The idea is that some of the 16 possible mesh mappings are more
important, and that this is a useful set of nodes to start exploring
this area. For mappings with an arbitrary number of connections, we
must sort them and use an index to choose a single element, because
geometry nodes does not support list fields. Note that the sort
index has repeating behavior as it goes over the "Total" number of
connections, and negative sort indices choose from the end.
Currently which of the "start" elements is used is determined by the
field context, so the "Field at Index" and "Interpolate Domain" nodes
will be quite important. Also, currently the "Sort Index" inputs are
clamped to the number of connections.
One important feature that isn't implemented here is using the winding
order for the output elements. This can be a separate mode for some
of these nodes. It will be optional because of the performance impact.
There are several todos for separate commits after this:
- Rename "Control Point Neighbors" to be consistent with this naming
- Version away the "Vertex Neighbors" node which is fully redundant now
- Implement a special case for when no weights are used for performance
- De-duplicating some of the sorting logic between the nodes
- Improve performance and memory use of topology mappings
- Look into caching some of the mappings on meshes
Differential Revision: https://developer.blender.org/D16029
|
|
This adds support for showing geometry passed to the Viewer in the 3d
viewport (instead of just in the spreadsheet). The "viewer geometry"
bypasses the group output. So it is not necessary to change the final
output of the node group to be able to see the intermediate geometry.
**Activation and deactivation of a viewer node**
* A viewer node is activated by clicking on it.
* Ctrl+shift+click on any node/socket connects it to the viewer and
makes it active.
* Ctrl+shift+click in empty space deactivates the active viewer.
* When the active viewer is not visible anymore (e.g. another object
is selected, or the current node group is exit), it is deactivated.
* Clicking on the icon in the header of the Viewer node toggles whether
its active or not.
**Pinning**
* The spreadsheet still allows pinning the active viewer as before.
When pinned, the spreadsheet still references the viewer node even
when it becomes inactive.
* The viewport does not support pinning at the moment. It always shows
the active viewer.
**Attribute**
* When a field is linked to the second input of the viewer node it is
displayed as an overlay in the viewport.
* When possible the correct domain for the attribute is determined
automatically. This does not work in all cases. It falls back to the
face corner domain on meshes and the point domain on curves. When
necessary, the domain can be picked manually.
* The spreadsheet now only shows the "Viewer" column for the domain
that is selected in the Viewer node.
* Instance attributes are visualized as a constant color per instance.
**Viewport Options**
* The attribute overlay opacity can be controlled with the "Viewer Node"
setting in the overlays popover.
* A viewport can be configured not to show intermediate viewer-geometry
by disabling the "Viewer Node" option in the "View" menu.
**Implementation Details**
* The "spreadsheet context path" was generalized to a "viewer path" that
is used in more places now.
* The viewer node itself determines the attribute domain, evaluates the
field and stores the result in a `.viewer` attribute.
* A new "viewer attribute' overlay displays the data from the `.viewer`
attribute.
* The ground truth for the active viewer node is stored in the workspace
now. Node editors, spreadsheets and viewports retrieve the active
viewer from there unless they are pinned.
* The depsgraph object iterator has a new "viewer path" setting. When set,
the viewed geometry of the corresponding object is part of the iterator
instead of the final evaluated geometry.
* To support the instance attribute overlay `DupliObject` was extended
to contain the information necessary for drawing the overlay.
* The ctrl+shift+click operator has been refactored so that it can make
existing links to viewers active again.
* The auto-domain-detection in the Viewer node works by checking the
"preferred domain" for every field input. If there is not exactly one
preferred domain, the fallback is used.
Known limitations:
* Loose edges of meshes don't have the attribute overlay. This could be
added separately if necessary.
* Some attributes are hard to visualize as a color directly. For example,
the values might have to be normalized or some should be drawn as arrays.
For now, we encourage users to build node groups that generate appropriate
viewer-geometry. We might include some of that functionality in future versions.
Support for displaying attribute values as text in the viewport is planned as well.
* There seems to be an issue with the attribute overlay for pointclouds on
nvidia gpus, to be investigated.
Differential Revision: https://developer.blender.org/D15954
|
|
This commit is an improvement in the previous fill tool
changes in order to improve how the extended strokes
are managed.
* Now, the algorithm checks if the extend cross a standard stroke, not only extend strokes.
* Option to enable or disable the stroke cross checking
because this can be slow in very complex scenes.
* Added `D` key to toggle stroke cross option.
* Option to use only collide strokes to be used as fill limit.
If the option to use only collide strokes is enabled, the
open extensions are in different color.
* Status text now shows mode and the actual extend factor.
This commits also contains a refactor of the loops
to use arrays as much as possible.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D16052
|
|
Removing this item was missed in 837144b4577f161baf1625.
|
|
|
|
Batch rename for action clips works in outliner and 3d view.
Reviewed By: campbellbarton
Ref D15819
|
|
Available on Windows and macOS, where such gestures are supported.
For Windows, disabling this option restores touchpad behavior to
match Blender 3.2.
Ref T97925
Differential Revision: https://developer.blender.org/D16005
|
|
At the cost of slightly more boilerplate code, we can avoid the `NodeItem`
and `NodeCategory` abstractions used to build the node add menu.
This makes the menus more flexible and more obvious, which will
make them easier to extend with assets.
The identifiers for the new menu types are inconsistent with regular
class naming for backwards compatibility with the old "category"
menu naming.
Also adds an item for the "Self Object" node missed in dd5131bd700c.
Differential Revision: https://developer.blender.org/D15973
|
|
This node allows access to the indices of neighboring control points
within a curve via an offset. This includes taking into consideration
curves that are cyclic.
Differential Revision: D13373
|
|
This patch replaces the existing transfer attribute node with three
nodes, "Sample Nearest Surface", "Sample Index", and "Sample Nearest".
This follows the design in T100010, allowing for new nodes like UV
sampling in the future. There is versioning so the new nodes replace
the old ones and are relinked as necessary.
The "Sample Nearest Surface" node is meant for the more complex
sampling algorithms that only work on meshes and interpolate
values inside of faces.
The new "Sample Index" just retrieves attributes from a geometry at
specific indices. It doesn't have implicit behavior like the old
transfer mode, which should make it more predictable. In order to not
change the behavior from existing files, the node has a has a "Clamp",
which is off by default for consistency with the "Field at Index" node.
The "Sample Nearest" node returns the index of the nearest element
on a geometry. It can be combined with the "Sample Index" node for
the same functionality as the old transfer node. This node can support
curves in the future.
Backwards compatibility is handled by versioning, but old versions can
not understand these nodes. The warning from 680fa8a523e0 should make
this explicit in 3.3 and earlier.
Differential Revision: https://developer.blender.org/D15909
|
|
* Improve how the extend lines collision is calculated.
* Added `S` key to switch between modes.
* Now extend factor does not disable visual aids (thi sis done with checkbox).
* Reduce the use of linked list and now memory array is used.
* Refactor Radius functions.
* Fixed bug of Radius mode when object is rotated.
* Cleanup code.
Differential Revision: https://developer.blender.org/D16022
|
|
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
|
|
|
|
In UV editor, previously unable to see grid and image at same time.
Maniphest Tasks: T78391
Differential Revision: https://developer.blender.org/D16038
|
|
In D10241, both NodeItems for NodeGroupInput and NodeGroupOutput in the
were moved from their categories into the 'node_group_items' generator.
As the NodeItem.poll() is called by the NodeCategory class and not by
the NodeItem class, the poll functions associated with those NodeItems
were never called. This should correct that.
Differential Revision: https://developer.blender.org/D16013
|
|
Add the Redo panel to the dopesheet & NLA editors. This also implicitly
adds it to the timeline editor, since it's a kind of action editor
internally.
This feature is needed for changing advanced properties of animation
operators, such as select grouped (see D14811). But it can also be
useful for existing operators, like precise keyframe position tweaking.
Changes are basically the same as in D6286 (which added the redo panel
for Graph Editor).
Some operators have internal properties that should be hidden. A full
list can be found in T98195. These will be fixed in a follow-up patch.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14960
|
|
This was missing in Blender File & Orphan Data view.
Typo in rBb5fc8f611e39.
Maniphest Tasks: T101201
Differential Revision: https://developer.blender.org/D16016
|
