Age | Commit message (Collapse) | Author |
|
In cases where "Allow" is followed by an infinitive, a noun needs
to directly follow it. But it makes more sense to follow it with a
gerund instead.
|
|
This option joins any stroke with an end near the actual stroke. Now it is not limited to the last stroke, any stroke in the same layer for the actual frame can be joined. The join can join two strokes drawing a third stroke.
If the end and the start of the result stroke are very small, the stroke is changed to be cyclic automatically.
There is a limit distance to join the stroke, if the distance is greater than this value, the strokes are not joined. Actually, a constant, threshold distance is used, but we could expose
as a parameter in the UI in the future.
The tool can be used with freehand drawing or with primitives.
Note: Great part of the patch is just a refactor of the old code to make it accessible and to keep code organized.
Reviewed By: mendio
Maniphest Tasks: T82377
Differential Revision: https://developer.blender.org/D9440
|
|
Note that I chose to modify the label of the main `Bake` button instead
of adding an extra label line, as that would disturb the UI in a
annoying way.
|
|
|
|
This icon was missed in rB0633a89e1827
|
|
The icons originally chosen for the collection colors were selected
during development and had a few issues with contrast in the light
theme, and the gray color was not a good choice against the default gray
backgrounds.
The new colors are more readable in both default Blender themes. Gray
was replaced with pink.
Differential Revision: https://developer.blender.org/D9504
|
|
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
|
|
This patch adds an opacity slider to the wireframe overlay. The previous
wireframe in dense geometry scenes could be too dark and sometimes the
user just wants an impression of the geometry during modelling.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D7622
|
|
Some changes here are planned which need feedback from users before
declaring this ready for the next release.
|
|
|
|
There is no GPU rendering support on macOS, so showing the panel only adds
confusion. Also hide the panels in builds without Cycles.
|
|
And remove Blender preference, which was expected to be set to match the system
preference for correct behavior. Instead just handle this automatically.
Differential Revision: https://developer.blender.org/D9402
|
|
Make post-bake cleanup of the Bake Action operator optional, and disable
by default.
Previously Bake Action would do two things:
- Bake the Action
- Clean up the FCurves
It is now possible (and even the default) to only perform the baking
operation.
Reviewed By: #animation_rigging, looch, sybren
Maniphest Tasks: T82210
Differential Revision: https://developer.blender.org/D9453
|
|
Move the "Show Group Colors" toggle from a per-editor option to a single
user preference in the Animation preferences. The Grease Pencil
animation channel side panel allows picking a channel color; this now
shows a message when channel colors are disabled.
The old "Show Group Colors" toggle had to be set per editor, and was on
by default. This meant that disabling group colors would require an
action for every file, for every editor. It is very hard to select a
color that works both as bone color in the 3D Viewport (needs to be
bright there) as well as the channel list (needs to be dark there), most
animators turn channel list colors off.
Differential Revision: https://developer.blender.org/D9391
|
|
|
|
This adds a Box option to the Text strip's style properties, plus related Box Margin value:
{F9208309}
When enabled the text is placed on top of a solid-filled rectangle of a chosen color, as shown below:
{F9208324}
When the box option is disabled the text strip works the same as it does now. When the box option is enabled the meaning of the Shadow option changes to provide a drop-shadow on the rectangle (and not on the text itself). The latter made more sense to me.
The box margin is specified as a fraction of the image width. The offset of the drop-down box shadow is fixed to a specific fraction of the image width as well.
I tested this feature on a movie of a couple of minutes containing dozens of text strips (all with box background), edge cases like multi-line strings and text overlapping the image edges.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9468
|
|
"Camera Parent Lock" can be useful when rigging cameras, but it is not
intuitive, and has also generated a lot of confusion (bug reports).
This is because it breaks the fundamental parent <-> child relationship
conventions in Blender, and there is no indication that it's intended
without diving into the preferences.
This commit moves the setting to the object level, and exposes it in
the relations panel in the property editor. It is exposed for every
object type because any object type can be "View Locked" in the 3D view.
The property description is also updated to reflect this change and be
more specific without getting too long.
In the future this could become a more general feature of the transform
system, but for now it is limited to "Lock Camera to View".
Differential Revision: https://developer.blender.org/D9239
|
|
Commit rBf5080c82dd915db6c7b9dd68a52aaaccf2600137
accidentally remove the Shift modifier key from
the `AUTOCONSTRAINPLANE` shortcut.
Differential Revision: https://developer.blender.org/D9480
|
|
Keymaps have previously been exported with an encoding dependent
on the current system locale. This caused issues when the
keymap contained non-ASCII characters, for instance in a string
property for an operator.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9449
|
|
|
|
These had an effect but were not exposed in the UI.
|
|
|
|
Keymaps have previously been exported with an encoding dependent
on the current system locale. This caused issues when the
keymap contained non-ASCII characters, for instance in a string
property for an operator.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9449
|
|
|
|
|
|
This matches behavior in WM_operator_view3d_unit_defaults.
|
|
|
|
|
|
|
|
This simply makes the panel a bit nicer given how things are layed out--
the items with larger visual weight are grouped at the top.
Differential Revision: https://developer.blender.org/D9366
|
|
Reviewed by @mendio
|
|
This operators was only accesible using the search menu.
|
|
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
|
|
This reverts commit 0277579b2850f0ba097741ca22eb8ae9ccd9bcea.
This commit caused build errors on Linux.
|
|
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
|
|
Rename `col` to `row` when it's actually a row (and not a column).
No functional changes.
|
|
This introduces a new operator to edit the detail size of constant
detail mode in dyntopo. The way this operator works and the
functionality it provides is similar to the "Voxel size edit" operator
for the voxel remesher.
It also includes a sample mode. When pressing Ctrl, the detail size
will be sampled from the surface under the cursor, updating the
preview in real time. This allows quick resolution changes without
using the operator multiple times.
The operator is set to Shift + D, replacing the old way to change
the constant detail size of dyntopo. Shift + R will remain available to
be enabled when the voxel remesher works with dyntopo. Deciding
if both detail sizes can be unified needs a separate discussion as the
new dyntopo can work with detail sizes in parts of the mesh that can
easily crash the remesher.
The structure of these operators is similar, but the data they control,
ranges, drawing and setup functions are completely different, making it
hard to merge them into one.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9355
|
|
Global automasking options are usually turned on/off for quick
adjustments both in brushes and filters, so it is convenient to have them
in a pie menu.
This uses the Alt + A shortcut.
Reviewed By: dbystedt, HooglyBoogly
Differential Revision: https://developer.blender.org/D9282
|
|
This adds an option to orientate the trimming shape using the surface
normal instead of the view when lasso trim is used.
Reviewed By: dbystedt, sergey
Differential Revision: https://developer.blender.org/D9231
|
|
Add a parameter to rotate the texture for Dots and Squares
Differential Revision: https://developer.blender.org/D9369
|
|
Basic support for velocity updates with the APIC method.
This commit adds APIC to the already existing dropdown menu for the simulation method. The APIC plugin within Mantaflow has been updated to the latest version.
|
|
Now the interpolate is available in draw mode (except the option of selected strokes).
Differential Revision: https://developer.blender.org/D9325
|
|
Relabel the Playback Synchronisation menu so that it's clear:
- what does happen (instead of describing what does //not// happen), and
- that the synchronisation options don't just affect audio.
The changes are:
- Change label from "Audio" to "Sync"
- Change the labels of the sync enum:
- No Sync → Play Every Frame
- Frame Dropping stays the same
- AV-sync → Sync to Audio
The "Audio" label has moved one option down, as that option does
actually relate to audio.
Reviewed By: looch, Severin, HooglyBoogly, campbellbarton
Differential Revision: https://developer.blender.org/D9269
|
|
|
|
`sys.executable` is documented to be a Python interpreter or None.
This was set to Blender's executable which caused the multiprocessing
module to spawn new instances of Blender instead of Python on WIN32.
See issue described in D7815.
Deprecate 'bpy.app.binary_path_python' & warn when using.
Blender's executable remains accessible via `bpy.app.binary_path`.
Modified 04c5471ceefb4, setting `sys.executable` instead of using
Py_SetProgramName, which is needed for a bundled Python installation.
|
|
Improved alignment of labels with other buttons.
Differential Revision: https://developer.blender.org/D9058
Reviewed by Julian Eisel
|
|
Add "Selection to" as prefix for those menu items that move the selected
keyframes to something, for both the Key → Snap menu and the Shift+S pie
menu.
No functional changes.
This was missed in rB477d983c2e8ab298cbf638d5aadd77fad9c2f677
Differential Revision: https://developer.blender.org/D9304
|
|
Various changes to some labels and descriptions to be more accurate, clear, or less confusing.
Differential Revision: https://developer.blender.org/D8394
Reviewed by Hans Goudey
|
|
Ref D9338
|
|
Ref D9338
|