Age | Commit message (Collapse) | Author |
|
Along some other typos in comments or variable names.
|
|
For gradient, put the parameter below both colors.
|
|
It's better keep this parameter here instead to put it at the end of the panel.
|
|
The slider should be inactive when the setting is turned off like
the wireframe slider.
|
|
|
|
The bevel type is a more useful check for graying out this property
because its effects will be apparent before choosing an object. Before,
the fill type property would only gray out with a bevel object selected.
|
|
Light rotation is supported both in world and view light orientation in
lookdev, so no reason to disable it.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D8958
|
|
|
|
This is not an exhaustive change, just for the 2D cursor and
UDIM grid properties. Also vertically align the "UV Vertex"
buttons like in the 3D view panels.
|
|
This adds XYZ symmetry as a property of meshes and updates all modes to
use the mesh symmetry by default to have a consistent tool behavior
between all modes and when switching objects.
Reviewed By: brecht, mano-wii, campbellbarton
Maniphest Tasks: T79785
Differential Revision: https://developer.blender.org/D8587
|
|
This object operator exits and frees the edit data of the
current object and enters the same mode in another one in a single step,
without going through object mode or keeping multiple edit object data
active. It is assigned to the D key.
This solves all conflicts that the right/click select keymap and the
emulate 3 button mouse produces for this operation and it is independent
of the state of Lock object modes.
Also, as the SculptSession is freed, when using Multires objects go
back to their preview resolution level, so it is possible to work on
high vertex count scenes without slowing down the viewport and other
performance problems.
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D7510
|
|
This implements a new overlay that blends the bakground color over the
objects that are not in the same mode as the active object, making
them fade with the background.
This is especially needed for sculpt mode as there is no other overlay
or indication in the viewport to display which object is active.
This is intended to be used with D7510 in order to have a faster
workflow when sculpting models with multiple objects.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8679
|
|
This adds an option for the HDRI rotation to follow the view rotation.
When this option is enabled, this allows EEVEE materials to be used as
matcaps for sculpting and painting.
This has an extra performance cost when orbiting around the model as the
lookdev cache needs to be recalculated, but in my test it is barely
noticeable.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8566
|
|
This new feature allows to use the strokes as an eraser of any stroke below. This is very handy to open holes in filled areas.
After running some tests, we have decided to keep the additive effect of the holdout color. To get clean holdout areas, just move the color to black to remove any additive effect. To have additive effect can be used in situations like tint slightly a transparent window with blue to simulate the glass.
See T79878 for more details
Differential Revision: https://developer.blender.org/D8932
|
|
Selection Preference)
Was missing a dedicated entry for LMB select, this is to be consistent
with how it is done for meshes.
Maniphest Tasks: T80905
Differential Revision: https://developer.blender.org/D8935
|
|
This impacts I/O add-ons. OBJ, FBX and Collada have been updated, glTF not yet.
Differential Revision: https://developer.blender.org/D4971
|
|
These are only used to hold static methods, there is no reason to
register them.
|
|
Update doc-strings, add note for why this decision was made.
|
|
This adds support for the same custom bevel profile widget used in
the bevel tool and modifier to the geometry generation for curves.
This is expecially useful for text and 2D curves with extrusion, as
it works much better than a weld & bevel modifier combination.
It can also be useful for adding quick detail to pipe-like objects.
The curve holds the CurveProfile struct and a new "Bevel Mode"
property decides which type of bevel to build, round, object, or
custom profile.
Although curves can already use another curve to make the bevel
geometry, this is a quicker way, and it also defines the profile of
just one corner of the bevel, so it isn't redundant. It's also nice
to have the same custom profile functionality wherever there is bevel.
Differential Revision: https://developer.blender.org/D8402
|
|
There is no ideal solution here, but we can assume by default that we should
use the Alpha output from a texture used for transparency data.
This will break people using a dedicated B&W texture for this alpha
pass, but we cannot really handle all cases properly in this wrapper, we
only try to support the most common ones to some extent.
|
|
Adds an optional slider to the action constraint so that it can be
driven without a constraint target.
This is very helpful for more complex rigging and mechanical rigs, as it
means the action constraint can be controlled with a driver/custom
property directly, currently if we want to use a driver to control it we
must add a "dummy" bone/object inbetween to act as a control.
Reviewed By: Sebastian Parborg, Sybren A. Stüvel, Demeter Dzadik, Julian Eisel
Differential Revision: http://developer.blender.org/D8022
|
|
This commit makes grid theming more consistent and capable by adding
some new theme colors related to grid rendering.
- Add grid theme color for node editor. `UI_view2d_multi_grid_draw`
is called with TH_GRID instead of a shaded `TH_BACK`.
Also color-blend `TH_NODE_GROUP`.
- Make the movie clip editor's clip preview grid respect grid theme
color (`ED_region_grid_draw` uses color-blended `TH_GRID`).
- Add versioning code to allow fixing existing themes (the resulting
themes should visually look the same as before)
These changes did cause some inconsistencies in the movie clip editor,
even after adjusting the themes accordingly:
1. The alpha slider of the grid color affects the background and not
the grid lines themselves.
2. The grids used by graph and dopesheet mode could already be themed
in the past. Now that the clip preview's grid can also be themed,
two different modes share the same theme color.
Differential Revision: https://developer.blender.org/D8699
|
|
This adds a new operator to the outliner context menu. The collections
context menu now shows inline icons to set the color tag for all
selected collections.
Manifest Task: https://developer.blender.org/T77777
Differential Revision: https://developer.blender.org/D8622
|
|
This adds color tagging to collections. There are 8 color
options which are themable in the user preferences, with an additional
option for no color tag by default.
This adds a new filled collection icon and 8 colored variants of the
icon that can be themed in the user preferences.
In this commit the only interface to setting the color tags is through
Python, and there is nowhere in the interface where the collections are
shown colored. Setting and viewing the color tags from the outliner will
follow.
Manifest Task: https://developer.blender.org/T77777
Differential Revision: https://developer.blender.org/D8622
|
|
All the changes made in the branch `soc-2020-fluid-tools` are included in this patch.
**Major changes:**
=== Viewport Display ===
- //Raw voxel display// or //closest (nearest-neighbor)// interpolation for displaying the underlying voxel data of the simulation grids more clearly.
- An option to display //gridlines// when the slicing method is //single//.
==== Grid Display ====
- Visualization for flags, pressure and level-set representation grids with a fixed color coding based on Manta GUI.
==== Vector Display ====
- //**M**arker **A**nd **C**ell// grid visualization options for vector grids like velocity or external forces.
- Made vector display options available for external forces.
==== Coloring options for //gridlines// ====
- Range highlighting and cell filtering options for displaying the simulation grid data more precisely.
- Color gridlines with flags.
- Also, made slicing and interpolation options available for Volume Object.
Reviewed By: JacquesLucke, sebbas
Differential Revision: https://developer.blender.org/D8705
|
|
`ctrl-F` to start the search is obviously necessary, but the clear
operator, `alt-F` requires some of explanation. First, it maps nicely
to the paradigm of "key to set, alt-key to clear," which makes it
unobtrusive. Second, it can be a quicker way to clear the search than
moving the mouse to the top. Finally, in the future, it could a reset
the panels to their expansion before the search started.
Differential Revision: https://developer.blender.org/D8857
|
|
This adds a search bar to the properties editor. The full search for
every tab isn't included in this patch, but the interaction with
panels, searching behavior, UI, region level, and DNA changes are
included here.
The block-level search works by iterating over the block's button
groups and checking whether they match the search. If they do, they
are tagged with a flag, and the block's panel is tagged too. For
every update (text edit), the panel's expansion is set to whether
the panel has a result or not. The search also checks for matching
strings inside enums and in panel labels.
One complication to this that isn't immediately apparent is that
closed panel's subpanels have to be searched too. This adds some
complexity to the area-level panel layout code.
Possible Future Improvements:
- Use the new fuzzy search in BLI
- Reset panels to their expansion before the search started if
the user escape out of the text box.
- Open all child panels of a panel with expansion.
Differential Revision: https://developer.blender.org/D8856
|
|
We will use a highlight on panel headers to convey that they have
a search match, so this commit initializes the theme color for the
properties editor.
Differential Revision: https://developer.blender.org/D8854
|
|
The context path "breadcrumbs" used to be in a panel in 2.79.
Although they look a bit better in the header, there isn't enough
space for them with the property search field in the header as well.
Maybe there will be another solution in the long term to fit both
the search field and this panel in the header, but for now, this
commit moves these labels back to a header-less panel.
Differential Revision: https://developer.blender.org/D8853
|
|
This reverts commit f492c8d488b7eb2166ca894e10a8128a1678a885.
|
|
UDIM textures cannot be repeated, but the option didn't communicate
this. This change makes the Show Repeat option inactive when viewing
Tiled images
|
|
There are some areas that don't handle pure emissive colors well. For
example erasing alpha using 2d or 3d painting. Or blurring an image in
the compositor.
This patch makes the rendering of pure emissive colors optional. In the
side panel of the Image editor it can still be enabled when needed.
There currently isn't a better place to store it as it is related on how
the image (or a layer of the image) is created. A future design needs to
make sure that the full workflow is supported.
|
|
|
|
|
|
This commit adds a label on top of the bake operator in modular bake mode. This way users will immediately see if their current settings will allow them to bake noise, meshes or particles after baking the simulation base.
|
|
Running `bpy.ops.script.reload()` from Python was crashing
since the operator being called was it's self freed.
Change the reload operator to defer execution - as supporting
re-registration during execution is quite involved for a corner-case.
|
|
Python 3.8 changed handling of constant values in its AST tool.
This code should work on both officialy supported 3.7, and newer 3.8,
for now.
|
|
Bone.children_recursive would return edit-bones when in edit-mode
irrespective of the type of the bone.
Check the type of self instead of the existence of edit-bones.
|
|
The old image editor has an option to enable the smooth wire drawing.
This option was stored per editor and disabled by default. This patch
connects the smooth wires in the UV/Image editor to `User Prefereces ->
Viewport -> Quality -> Smooth Wire [] Overlay`.
The old option is left in place and will be removed when the old image
editor drawing code will be removed before BCon 3.
|
|
This patch reverses use draw manager for image editor the
experimental feature. Now the new drawing is enabled by default.
Inside the experimental tab in the user preferences there is now an
option to revert back to the old drawing method.
Using this option we can easilly check if all drawing features have been
migrated over. The plan is to remove the legacy drawing before BCon 3.
|
|
This project moves the current UV/Image editor drawing to the draw manager.
Why would we do this:
**Performance**:
Current implementation would draw each texel per time. Multiple texels could be
drawn per pixel what would overwrite the previous result. You can notice this
when working with large textures. Repeat image drawing made this visible by
drawing for a small period of time and stop drawing the rest. Now the rendering
is fast and all repeated images are drawn.
**Alpha drawing**:
Current implementation would draw directly in display space. Giving incorrect
results when displaying alpha transparent images.
This addresses {T52680}, {T74709}, {T79518}
The image editor now can show emission only colors. See {D8234} for
examples.
**Current Limitations**
Using images that are larger than supported by your GPU are resized (eg larger
than 16000x16000 are resized to 8k). This leaves some blurring artifacts. It is
a low priority to add support back of displaying individual pixels of huge
images. There is a design task {T80113} with more detail.
**Implementation overview**
Introduced an Image Engine in the draw module. this engine is responsible for
drawing the texture in the main area of the UV/Image editor. The overlay engine
has a edit_uv overlay which is responsible to draw the UV's, shadows and
overlays specifically for the UV Image editor. The background + checker pattern
is drawn by the overlay_background.
The patch will allow us to share overlays between the 3d viewport and UV/Image
editor more easily. In most cases we just need to switch the `pos` with the `u`
attribute in the vertex shader.
The project can be activated in the user preferences as experimental features.
In a later commit this will be reversed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8234
|
|
This should improve the issue with Scrape accumulation in concave
surfaces. When the strength of the brush is higher, the area radius is
also bigger, so the scrape plane is more stable preventing it from
accumulating displacement in the same area.
The Scrape/Fill default presets are also updated to include this
functionality.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8821
|
|
The outliner context menu has options to enter and exit edit mode, but
they only show in edit mode, and they don't work. This removes the
broken entries and related code.
Part of T77408
Differential Revision: https://developer.blender.org/D8641
|
|
Add a column of icons in the left gutter of the outliner for controlling
the interaction modes of objects. When an object is in a mode other than
object mode, the mode icon will draw to the left of that object. Any
other objects that are valid to be added or swapped into the mode are
drawn with a dot to the left of the object.
Clicking the dot to the left of an object will swap that object with the
current active object in the interaction mode. For edit and pose modes,
ctrl clicking the dot will add that object to the current mode.
Clicking the mode icon next to the active object removes it and all
other objects from the current mode.
The behavior is nearly identical to the previous edit/pose mode toggling
by selecting the mesh and armature datablocks, with additional support
for all interaction modes.
Currently two undo steps are pushed to prevent an assert.
Part of T77408
Manifest Task: https://developer.blender.org/T68498
Differential Revision: https://developer.blender.org/D8641
|
|
Modular caches for noise, particles and meshes require that additional data is baked (i.e. is resumable option). With this commit users will be explicitly asked to enable this option before being able to bake noise, particles or meshes.
|
|
|
|
Differential Revision: https://developer.blender.org/D7548
|
|
This commit also changes the U shortcut to open the unwrap menu instead
of the Unwrap operator. The unwrap operator can now be accessed by
pressing U twice.
Note, these operators use the 3D Viewports selection and not the UV
Editor selection. In the future the operators should unwrap based on the
selection within that editor.
Fixes T80600
Differential Revision: https://developer.blender.org/D8834
|
|
There is a list of attributes, along with operators to add and remove
attributes. For adding, there are a few standard attributes that can be
added quickly, as well as a popup to create a custom attribute.
Ref T76659
Differential Revision: https://developer.blender.org/D8636
|
|
|