| Age | Commit message (Collapse) | Author |
|---|
|
|
|
All changes:
* Include `file.pack_libraries` and `file.unpack_libraries` to the menu
[1].
* Rename "Pack Blender Libraries" → "Pack Linked Libraries" [2].
* Rename "Unpack Blender Libraries" → "Unpack Linked Libraries" [2].
* Rename "Pack All Into .blend" → "Pack Resources" [3]
* Rename "Unpack All Into Files" → "Unpack Resources" [3]
* Rename "☑ Automatically Pack Into .blend" → "☑ Automatically Pack
Resources" [3]
* Rename "Make All Paths Relative" → "Make Paths Relative" [4]
* Rename "Make All Paths Absolute" → "Make Paths Absolute" [4]
* Add separators accordingly
---
[1] - This was never exposed since its original commit rB16411da41e40.
Now that operator not listed in menus don't
show up in the search, this became even more hidden.
[2] - The original name (Pack Blender Library) was not clear enough.
Pose Libraries and Asset Libraries are also technically Blender
libraries.
[3] - The term All was misleading since it didn't include the Linked
Libraries.
[4] - No need to use "All". It is not used in the Report/Find Missing
Files either.
This commit put this in the File > External Data menu.
Differential Revision: https://developer.blender.org/D11109
|
|
This patch adds initial curve support to geometry nodes. Currently
there is only one node available, the "Curve to Mesh" node, T87428.
However, the aim of the changes here is larger than just supporting
curve data in nodes-- it also uses the opportunity to add better spline
data structures, intended to replace the existing curve evaluation code.
The curve code in Blender is quite old, and it's generally regarded as
some of the messiest, hardest-to-understand code as well. The classes
in `BKE_spline.hh` aim to be faster, more extensible, and much more
easily understandable. Further explanation can be found in comments in
that file.
Initial builtin spline attributes are supported-- reading and writing
from the `cyclic` and `resolution` attributes works with any of the
attribute nodes. Also, only Z-up normal calculation is implemented
at the moment, and tilts do not apply yet.
**Limitations**
- For now, you must bring curves into the node tree with an "Object
Info" node. Changes to the curve modifier stack will come later.
- Converting to a mesh is necessary to visualize the curve data.
Further progress can be tracked in: T87245
Higher level design document: https://wiki.blender.org/wiki/Modules/Physics_Nodes/Projects/EverythingNodes/CurveNodes
Differential Revision: https://developer.blender.org/D11091
|
|
|
|
certain modes
Reported for ops.transform.vertex_warp and ops.transform.vertex_random.
Polling will check with ED_transverts_check_obedit, if we know it will
fail e.g. for pose mode, we can do the same check in the UI already.
Maniphest Tasks: T87926
Differential Revision: https://developer.blender.org/D11128
|
|
|
|
|
|
Concludes these files:
[x]bpy_types.py
[x]operator_modal_draw.py
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11129
|
|
|
|
|
|
Replace the existing extension instead of adding it.
|
|
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
|
|
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
|
|
This is a first version of an Attribute Transfer node. It only supports two
modes for mapping attributes from one geometry to another for now.
More options are planned for the future.
Ref T87421.
Differential Revision: https://developer.blender.org/D11037
|
|
|
|
|
|
Reviewed by: Sebastian Parborg
Differential Revision: https://developer.blender.org/D11089
|
|
|
|
This gets rid of a `DeprecationWarning` in bpy_types.py caused by invalid escape sequences.
More info here: https://docs.python.org/3/library/re.html
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10998
|
|
Use multiprocessing with simple deform modifiers.
Master 2.92 fps this patch 3.13 fps on Ryzen 1700X With Vega 64 GPU.
3970X: 2.85 fps -> 2.95 fps
3990X: 3.15 fps -> 3.41 fps
3995WX: 3.21 fps -> 3.38 fps
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D10609
|
|
In cases where the same node tree is used in different materials with
small changes, the wrong material could be selected.
Cause: Hair shaders GPU resources weren't updated and used the previous bound data.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D11036
|
|
Corner action zones allow joining any neighbors. New 'Area Close' operator. Improved Header Context Menu.
Differential Revision: https://developer.blender.org/D8084
Reviewed by Campbell Barton
|
|
Add a keying set that includes location, rotation, scale, and custom
properties.
The keying set is intentionally not based on the "Whole Character"
keying set. Instead, it is generic enough to be used in both object and
pose animation, making it possible to quickly switch between animating
characters and props without switching keying sets.
This is, according to @rikkert, what the Blender Studio animators need
99.9% of the time.
|
|
|
|
Move code common to the Whole Character keying sets ("Whole Character" and
"Whole Character (Selected Bones Only)" into a mix-in class. This avoids
the need to use direct assignments like
`poll = BUILTIN_KSI_WholeCharacter.poll`.
No functional changes.
|
|
Use `self` as self-parameter of methods, instead of the non-standard and
cryptic `ksi`.
No functional changes.
|
|
Now the list of masks can be ordered as is done in Layers.
This can be used to organize list and in the future refquired for new masking options.
|
|
This is a first iteration of a switch node. It can only switch between
two inputs values based on a boolean. A more sophisticated switch
node that has an integer selector will probably come later.
Currently, the geometry nodes evaluator does not support lazy evaluation
of individual inputs. Therefore, all inputs will be computed currently.
An improvement to the evaluator will be worked on separately.
Ref: T85374
Differential Revision: https://developer.blender.org/D10460
|
|
|
|
This was another error in rBac90c8a7743f. It turns out it's quite
important to use a full build to save the file, which I didn't do then.
|
|
|
|
Differential Revision: https://developer.blender.org/D10993
|
|
This changes the following items:
- package name is now `blender-3.0.0-git.09eb04c0a865-windows64`
rather than `blender-3.00.0-git.09eb04c0a865-windows64`
- Fix version resource for blender.exe not building
- Data directories are now `3.0\...` rather than `3.00\....`
- User prefs are now in:
`c:\Users\users\AppData\Roaming\Blender Foundation\Blender\3.0\`
rather than:
`c:\Users\users\AppData\Roaming\Blender Foundation\Blender\3.00\`
- Updating startup & preferences from previous release
has a special exception for 3.0 to check for 3.93 and older.
See T87532
Ref D10986
|
|
|
|
`make lite` does not use audaspace, so some files will pollute the console with
tons of warnings about audio values not defined.
Reviewed By: nexyon, campbellbarton
Differential Revision: https://developer.blender.org/D10981
|
|
|
|
This was a mistake in rBac90c8a7743f6d0
|
|
Credit: Erindale Woodford - youtube.com/erindale /
twitter.com/erindale_xyz
|
|
Since these were added, we decided that builtin and reserved name
attributes start with a lowercase letter. We also use "id" already in
a few nodes, so this change will be consistent with that.
|
|
When inserting a node on top of a link, the multi input socket
indices weren't updated. This fixes that and keeps the relative
order of the links the same.
Author: Wannes Malfait
Reviewed By: Fabian Schempp
Differential Revision: https://developer.blender.org/D10969
|
|
This introduces a context path to the spreadsheet editor, which contains
information about what data is shown in the spreadsheet. The context
path (breadcrumbs) can reference a specific node in a node group
hierarchy. During object evaluation, the geometry nodes modifier checks
what data is currently requested by visible spreadsheets and stores
the corresponding geometry sets separately for later access.
The context path can be updated by the user explicitely, by clicking
on the new icon in the header of nodes. Under some circumstances,
the context path is updated automatically based on Blender's context.
This patch also consolidates the "Node" and "Final" object evaluation
mode to just "Evaluated". Based on the current context path, either
the final geometry set of an object will be displayed, or the data at
a specific node.
The new preview icon in geometry nodes now behaves more like
a toggle. It can be clicked again to clear the context path in an
open spreadsheet editor.
Previously, only an object could be pinned in the spreadsheet editor.
Now it is possible to pin the entire context path. That allows two
different spreadsheets to display geometry data from two different
nodes.
The breadcrumbs in the spreadsheet header can be collapsed by
clicking on the arrow icons. It's not ideal but works well for now.
This might be changed again, if we get a data set region on the left.
Differential Revision: https://developer.blender.org/D10931
|
|
This will hopefully make it faster to start using the node editor.
The workspace also includes the spreadsheet. Note that while
existing startup files won't have this workspace added, it will be
in the list of options when clicking on the "add workspace" button.
Ref T86499
|
|
Within the 2D Animation workspace, the 'Cursor' dropdown currently displays the 'Display Cursor' incorrectly aligned.
This change fixes the alignment issue.
Reviewed By: #user_interface, #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D10614
|
|
Some operations may use no preferredResolution ({0, 0}) when calling determineResolution on inputs to check if they have resolution on their own. See MixOperation or MathOperation determineResolution implementation. In such cases {0, 0} resolution ends up being set when an input doesn't have own resolution, breaking propagation of the original preferredResolution. They don't mean to set it as resolution, it's just a check.
This patch only allows to set valid resolutions (>0). When it's 0 it may be understood as "No preferred or determined resolution" so it should not be set to give output operations another chance of finding a proper resolution by calling determineResolution again with a different preferredResolution.
Test file:
{F9932526}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D10972
|
|
This implements the changes discussed in T87134 for including switch
object funcionality in 2.93. This includes:
- Remove the switch object operator experimental option
- Remove the option for switching objects in Edit Mode.
- Rename switch_object to transfer_mode.
- Enable the operator only in sculpt mode.
- Expose the operator in the Sculpt menu with an eyedropper modal
option.
On later releases, we could revisit enabling the operator in other mode
and object types as well as its place in the UI.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D10953
|
|
Sculpt menus were using the legacy expand operator. This updates all
entries to use the new one.
It does not make sense to use Expand from the menus as it relies on the
brush cursor position, but now all Expand shortcuts are listed in the
UI.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10952
|
|
This commit cleans up the RNA names of select mirror operators so that
they are all "Select mirror".
This makes the select menu in edit/pose mode consistent regardless of
object type.
Differential Revision: https://developer.blender.org/D7356
|
|
|
|
|
|
|
