| Age | Commit message (Collapse) | Author |
|---|
|
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
|
|
The option already works, just missing from the ui since it
has completely different option set from newtonian and fluid.
|
|
Currently, the lack of spacing (or rather, odd spacing/clumping) in places
seemed a bit off.
|
|
* "Flip direction" -> "Flip Direction"
* "Show drawing direction" -> "Show Directions"
* "Grease Pencil Curves" -> "Brush Curves"
(I was considering "Brush Response Curves" instead, but that seemed like too much
of a mouthful)
* "X" for removing a palette. The UI there was more similar to a standard datablock
selector, so it should use the "+X" combo instead of "+-" combo for consistency.
(Note though, presets tend to use "+-" instead - e.g. see the Render Settings)
|
|
Group membership testing for including/excluding feature lines was not
accounting for object names possibly further qualified by library file
paths.
Also fixed a few potential (but unlikely) references of uninitialized
variables.
A big thank to Bastien Montagne for the insight on the cause of the
problem and how to fix it.
|
|
Caused by merge conflicts, slipped throug when double checking.
|
|
Improve current Grease Pencil in order to get a better 2D animation tool.
More info in WIKI pages: https://wiki.blender.org/index.php/User:Antoniov
Reviewed By: Severin, aligorith, campbellbarton
Patch by @antoniov, with edits by @Severin.
Differential Revision: https://developer.blender.org/D2115
|
|
This patch improves UI of a recently added solver preference in boolean modifier:
{F331776}
Issue with the current UI is that it shows user unnecessary information and breaks established grid layout.
Reviewers: carter2422
Reviewed By: carter2422
Subscribers: carter2422
Tags: #user_interface, #bf_blender
Differential Revision: https://developer.blender.org/D2136
|
|
|
|
This feature is extremely useful for layering multiple cloth objects,
and there is no reason there shouldn't be the same kind of feature for softbody.
|
|
|
|
Reviewed By: dingto, sergey
Differential Revision: https://developer.blender.org/D2127
|
|
This setting can also be animated, to create a "time warp" effect.
D2122 by @LucaRood
|
|
This adds the ability for cloth simulations to respect changes in the underlying mesh.
So you can for instance, animate shape keys, armatures, or add any deformation modifiers (above the cloth modifier).
This is mainly useful for (but not limited to) cartoon animations,
where your character might stretch or change shape, and you want the clothes to follow accordingly.
D1903 by @LucaRood
|
|
D2121 by @LucaRood
|
|
|
|
Subdivision options can now be found in the subsurf modifier. The modifier must
be the last in the stack or the options will be unavailable. Catmull-Clark
subdivision is still unavailable and will fallback to linear subdivision instead
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2109
|
|
methods
This mostly affects physics panels. Any engines relying on
RenderEngine.use_game_engine flag to show/hide panels will need to be
updated. The COMPAT_ENGINES technique is how we usually deal with this.
One issue with use_game_engine is that I cannot find a way to set it; it
appears only the BGE can set it. This means (without this commit)
external RenderEngines cannot get rid of the default physics panels.
The RE_GAME flag (the C flag behind use_game_engine) is pretty hacky
and we should look into removing its usage where possible.
|
|
Needed since Debian & FreeBSD both move away from keeping a synlink to `python`.
|
|
|
|
We need to leave tweak mode before trying to modifiy the action as doing
so will leave Blender in a semi-corrupted state.
Reviewers: #animation
Reviewed by: aligorith
Maniphest Tasks: T48397
Differential Revision: https://developer.blender.org/D2119
|
|
|
|
Also wrap line-length
|
|
|
|
Unnecessary limit was applied.
|
|
D1963 by @wisaac, re-worked to de-duplicate logic
|
|
D2093 by @Blendify
|
|
There are still issues with overlapping geometry,
however some of the issues reported are are causing problems,
or fail entirely with Carve too.
|
|
|
|
Support applying decimate to the mesh selection.
|
|
Shorter and consistent with other RNA.
|
|
|
|
This reverts commit 4fd78bb06faa31f265af6a5f247cf4255b5ac479.
After further testing, it turns out that these options are less-broken than
I remember them being (and have been hearing about). Specifically, as long
as you disable all 3-axes of a transform component (i.e. all location, all
rotation, all scale) you're not likely to have problems, whereas if you only
disabled one axis (i.e. y-rotation), you may have problems in some cases.
So, restoring these to the UI.
|
|
* Added new operators to take the current transform value (loc/rot/scale or all 3)
and convert/apply that transform to a corresponding delta transform value. By default,
the transform value will be zeroed out again afterwards, so you don't end up with a
double transform.
* These operators can be found in the "Apply" menu (Ctrl-A)
* The "Animated Transforms to Deltas" (which does a similar job, except it adjusts all
existing animation data instead of the current transform) has also been moved to the
Apply menu (it was in the Transform menu instead)
|
|
A long requested feature has been to have objects appear in alphabetical order
in the animation editors, so that it is easier to find where they occur. This
commit implements support for this.
The main sticking point has been the performance impact of having this sorting
happening all the time (as the actual list of "bases" cannot be modified, as the
old depsgraph still needs random-looking unsorted order of objects for scheduling
updates). However, it recently occurred to me that perhaps by restricting it to
the one case where the ordering actually matters (i.e. when we're getting the channel
list for drawing all channels, vs operating on them), and adding a toggle to turn the
sorting off in heavy scenes when it might bog down things, that it will probably
be acceptable enough in general. Furthermore, if things get really bad, we can investigate
putting in place some sort of caching scheme for this too - though hopefully the
new depsgraph will make that unnecessary (i.e. it doesn't sort the bases directly anymore).
|
|
To make it easier to synchronise timing across multiple strips, if you add
markers locally to an action, these will show up in the NLA strip in the
NLA Editor. These markings can then be used to line up the start/end of
another strip, or even to make sure that the markers from two different
strips end up lining up.
By default, this is turned on, but it can be disabled (via the View menu)
if it adds too much visual noise.
|
|
full sample.
Differential Revision: https://developer.blender.org/D2080
|
|
Environment lighting (aka ambient) is a key component of any renderer.
It's implemented like the Environment lighting of BI render for Approximate Gather mode. It support "Sky Color" and "White" Environment lighting modes.
It would be great if the user could see actual lighting conditions right in the Blender viewport instead of waiting for the renderer to complete the final image, exporting for external renderer or for a game engine.
Before:
{F113921}
After:
{F113922}
Example file: {F319013}
Original author: valentin_b4w
Alexander (Blend4Web Team)
Reviewers: valentin_b4w, campbellbarton, merwin, brecht
Reviewed By: brecht
Subscribers: panzergame, youle, duarteframos, AlexKowel, yurikovelenov, dingto, Evgeny_Rodygin
Projects: #rendering, #opengl_gfx
Differential Revision: https://developer.blender.org/D810
|
|
This looks a bit odd, but being able to see if dyntopo is enabled
when the panel is collapsed is handy.
|
|
|
|
|
|
Was clear from name this is to run external scripts.
|
|
The RNA properties are still there (in case you really need them), except now
they will not be shown in the UI anymore, as this constraint really didn't
work well/at all when any of those was disabled. Most people shouldn't really
need to worry about this change.
If anyone wants a matrix-math challenge, they're welcome to try getting those
working for real, so that we can show these toggles again.
|
|
This only works in the Action and Dopesheet modes (which operate on FCurve keyframes).
Support for Grease Pencil and Mask Keyframes though is still pending.
|
|
|
|
As suggested by mendiobox:
* Don't show "enable editing" in the 3D view. You can already do this by switching
into stroke editing mode here, so no need for the duplication. (In other editors
though, this can't be done yet, so we don't do it)
* Make the "Convert" button into a dropdown so that you don't need to deal with a
a separate popup menu
* In the 3D view, don't show the selection + transform operators that can be easily
found in the menus too (as well as having commonly used shortcuts)
|
|
deletes on all editable layers
This new operator will delete any GP frame it finds on the current frame, regardless
of whether it's on the active layer or not. It will only remove the frames if the
layer is editable, but otherwise, it will just go for it.
The existing operator is great for use in the panel (where it only applies to the active
frame), but it was not so good for all the other places where tools can be invoked
(e.g. D-X, or Delete) as you're typically thinking about the whole scene more holisticaly
than just caring about a particular layer.
|
|
This can be kept on file level but best keep out of operator functions.
|
|
Name operator based on default behavior.
|
|
Support Snapping screen-space 2d curves, (was applying world-space coords in screen-space).
Also show snap settings in header.
|
